March 2021 - Mailman-users - lists.mailman3.org

Find a smtp server to send out emails
by Leon Aug. 1, 2026

Aug. 1, 2026

Hi, This problem is not caused by mailman, but I still want to give it a shot here. I'm hosting a mailing list on top of mailman3. Emails are supposed to be sent out by AWS ses. However, ses requires that sender address must be verified, which leads to a problem that emails sent by subscribers to mailing list cannot be sent to other subcirbers, since their addresses are not verified. And it is impossible to verified every subscriber. Are there smtp service providers allowing unverified email address to send out emails, or do I have other solutions? Thanks. -- Best wishes, Leon

4 4

Reason for Shunting
by Brian Carpenter Feb. 23, 2026

Feb. 23, 2026

Is there a way to determine why a message keeps ending up in the shunt queue? -- Brian Carpenter Harmonylists.com Emwd.com

3 5

Xapian alternatives
by Andrew Bernard Nov. 11, 2025

Nov. 11, 2025

Are there alternative search engines to Xapian that can be used for Mailman 3? I have come to understand that Xapian development stalled in the v2.0 attempt.

5 8

Moderation of held emails vs. spam
by David Krantz March 11, 2025

March 11, 2025

Hi, I now run Mailman 3.3.1, installed from pip. Is there now any way to prevent Mailman from forwarding the contents of the held message when notifying moderators of held messages? In my case these messages often are spam messages and if the entire contents are forwarded it triggers spam handling in the recipient address(es) which over time risks classifying all moderation emails as spam or even classifying the list domain or server as a spam source. Even my own outgoing filter classifies it as spam, which I will fix. I currently run rspamd for spam filtering, graylisting and DKIM and ARC verification/signing. Someone on this recommended it, thank you for that as it removes the need for other milters. I guess that this would be a simple change to make as a kludge but a proper implementation as a setting would be a lot better. I'd like it as a global setting but that might be too coarse. Cheers // David

3 4

How To Install Mailman 3 on Debian 10 (Complete Guide)
by Brian Carpenter Feb. 25, 2025

Feb. 25, 2025

I have finished my how-to install Mailman 3 on Debian 10 completed to the point where you can use it to get a fully functional Mailman 3 environment up and running. This is a comprehensive guide that walks you through installing EVERYTHING (currently!) that Mailman 3 needs to run. It also makes updating Mailman 3/Postorius/Hyperkitty very easy. I have not added the update directions yet but will very soon. I also plan on adding a section on setting up DKIM and Xapian with Mailman 3. I hope this helps those who wish to get a Mailman 3 server up and running quickly and brings a sense of sanity to the confusion regarding the various documentation out there concerning the installation of Mailman 3/Postorius/Hyperkitty. I intend to add a How-to for Ubuntu 20 at some point. Without further ado: https://wiki.list.org/DOC/Howto_Install_Mailman3_On_Debian10 I am sure the above guide can use improvements. Feel free to contact me off-list to point out mistakes/improvements, etc. -- Brian Carpenter Harmonylists.com Emwd.com

13 38

Re: mail stuck in "out" queue
by Dmitry Makovey Dec. 18, 2024

Dec. 18, 2024

So our mailman got stuck again, but I did follow your advise. Here's what I've found: On 3/29/19 2:58 PM, Mark Sapiro wrote: > On 3/29/19 2:28 PM, Dmitry Makovey wrote: >> I've had encountered this situation now twice: mail is being stuck in >> "out" queue and nothing in the logs indicates the issue. Is there a way >> to ask mailman-core politely to attempt delivery (perhaps with increased >> debugging in the logs) *without* restarting the core (which does solve >> *this* problem but creates other problems, like availability of the >> mailman as a whole) > > > Is the "out" runner running? yes: # docker top mailman-core | grep -F out: 100 21681 13215 0 Mar28 ? 01:14:16 /usr/local/bin/python /usr/local/bin/runner --runner=out:0:1 -C /etc/mailman.cfg > ps -fwwA |grep runner=out > > If not, you should be able to start it as the Mailman user with a > command like > > /path/to/python3 /path/to/mailman/bin/runner -C /path/to/mailman.cfg > --runner=out:0:1 > > See 'ps -fwwA|grep runner' for examples > > If the out runner is running, is there a file named *.bak along with all > the *.pck files in queue/out/ there is one, yes: # ls -l /srv/mail/mailman/core/var/queue/out/*.bak -rw-rw---- 1 100 65533 21512 Apr 14 19:45 /srv/mail/mailman/core/var/queue/out/1555296331.8386078+2c905825b82708e5a682b872b0aff320c9dd0b2e.bak what does it indicate and what should my steps be to resolve this (other than restarting queues)? > And if it's not, is there anything in Mailman's logs to indicate why it > died? > > Also, 'mailman restart' should only take a matter of seconds, but if the > out runner is running but not processing its queue, I think sending it a > SIGINT should restart it. SIGINT killed the process allright, but it didn't auto-respawn. I ended up spawning it with: /usr/local/bin/python /usr/local/bin/runner --runner=out:0:1 -C /etc/mailman.cfg but soon realized it doesn't go to background nicely so I've nohup'ed it in the end. but it did solve my problem. -- Sr System and DevOps Engineer SoM IRT

6 17

How to Increase outgoing mail volume for Mailman 3
by Brian Carpenter Dec. 9, 2024

Dec. 9, 2024

Hello everyone, We had a new client come on board that brought a list that had the largest out-going mail volume that I have ever dealt with. So I did what any sane server administrator would do that is running Mailman 3: I ran to Mark Sapiro for help! Here is what the Sage of all things Mailman counseled me to do: 1. Disabled VERP delivery. VERP can help improve mail delivery by delivering 1 message per SMTP transaction (I think I got that right). Using VERP is counter-productive as it can seriously delay outgoing mail delivery for a high-volume list. So you can use something like the following in the MTA section of your mailman.cfg: [mta] verp_confirmations: no verp_personalized_deliveries: no verp_delivery_interval: 0 2. I configured Mailman 3 to run 4 outgoing runners. The default is 1. This action was the game changer. It allows Mailman to handle 4 incoming messages at a time instead of 1. My client's incoming list volume was high enough where it was overwhelming the single outgoing runner. Here is what I added to the mailman.cfg file: [runner.out] instances: 4 Doing this step immediately solved the backlog in var/queue/out. 3. If you start up with a new server for a list that is high volume then keep an eye out for Proofpoint and Vade Security as they will block your new IP address quicker than Mark Sapiro can say "This is a bug. See <some Gitlab.com url>" Mark, thank you! -- Brian Carpenter Harmonylists.com Emwd.com

5 10

Logging subscribes/unsubscribes
by Brian Carpenter Oct. 22, 2024

Oct. 22, 2024

Does Mailman 3 log subscribes and unsubscribes for each list the way Mailman 2 did? Brian

5 7

Questions regarding message acceptance
by Pawel Grzywaczewski Sept. 19, 2024

Sept. 19, 2024

Hello, I have few questions regarding usage of Mailman3: 1) We have list1 and list2 with members. Can we specify that all members of list1 can post messages to list2? We could potentially write a script that would synchronize members of another list to “Accept these non-members” of another list, but with thousands of lists it will be difficult to maintain lists in synchro. So perhaps there is a concept of adding another list to “Accept these non-members” and mailman real-time evaluate membership of another list upon message arrival? 2) In explanation of “Accept these non-members” it’s written: “While non-regexp addresses can be entered here, it is preferred to add the address as a nonmember and set the nonmember's Moderation to Default Processing”. I noticed that if someone posts to a list then he is added automatically to non-members. Which means that next time he will be able to post. My understanding is that it’s better to use the feature “Accept these non-members”. Am I correct? Thank you, Paweł

5 7

Display the last post time for a list or all lists.
by Henrik Rasmussen Aug. 9, 2024

Aug. 9, 2024

Does Mailman 3 have something similar to https://www.msapiro.net/scripts/last_post.py displaying the last post time for a list or all lists?

3 4

hyperkitty.lib.utils Failed to update the fulltext index
by Ben Harris April 13, 2024

April 13, 2024

hello there, i migrated to a new host last night and i've been getting this error from a cronjob mail every minute. anyone have any ideas what would cause this? ERROR 2019-04-17 14:26:33,056 27205 hyperkitty.lib.utils Failed to update the fulltext index: ord() expected a character, but string of length 0 found Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/hyperkitty/lib/utils.py", line 186, in run_with_lock fn(*args, **kwargs) File "/usr/lib/python2.7/dist-packages/hyperkitty/search_indexes.py", line 87, in update_index update_cmd.update_backend("hyperkitty", "default") File "/usr/lib/python2.7/dist-packages/haystack/management/commands/update_index.py", line 276, in update_backend last_max_pk=max_pk) File "/usr/lib/python2.7/dist-packages/haystack/management/commands/update_index.py", line 97, in do_update backend.update(index, current_qs, commit=commit) File "/usr/lib/python2.7/dist-packages/haystack/backends/whoosh_backend.py", line 178, in update self.setup() File "/usr/lib/python2.7/dist-packages/haystack/backends/whoosh_backend.py", line 126, in setup self.index = self.storage.open_index(schema=self.schema) File "/usr/lib/python2.7/dist-packages/whoosh/filedb/filestore.py", line 176, in open_index return indexclass(self, schema=schema, indexname=indexname) File "/usr/lib/python2.7/dist-packages/whoosh/index.py", line 421, in __init__ TOC.read(self.storage, self.indexname, schema=self._schema) File "/usr/lib/python2.7/dist-packages/whoosh/index.py", line 632, in read check_size("int", _INT_SIZE) File "/usr/lib/python2.7/dist-packages/whoosh/index.py", line 626, in check_size sz = stream.read_varint() File "/usr/lib/python2.7/dist-packages/whoosh/filedb/structfile.py", line 191, in read_varint return read_varint(self.read) File "/usr/lib/python2.7/dist-packages/whoosh/util/varints.py", line 102, in read_varint b = ord(readfn(1)) thanks, ben

5 8

Splitting hosts: mta&core vs postorius
by Ruth Ivimey-Cook Jan. 18, 2024

Jan. 18, 2024

I'm trying to set up mailman3 on two hosts, one of which runs core + exim, the other runs postorius (&possibly hyperkitty). I have I think got core set up correctly, and postorius is sort of usable, but anything in the web ui that talks to core ends up with a white screen. I think what is happening is a postorius URL ends up with the core (or perhaps no) hostname, and as there's nothing there to answer it fails. I've checked the settings and I don't think I have misconfigured postorius. Is it possible that the bad url is being passed from core to postorius in some way and reused without changing the host? In the config at present, both hosts are visible to the browser, and each host can communicate with the other. Any ideas on how to pin down the problem better? Ruth

6 31

Loops back to myself
by David Krantz Jan. 12, 2024

Jan. 12, 2024

Hi, I have a problem with my Mailman 3-setup. The symptom is that postfix rejects non-existing addresses for my list domains with <adr(a)example.com>: mail for example.com loops back to myself What I guess happens happens is that postfix for some reason accepts the mail as it is for a relay domain and finds that it is not deliverable locally as the address does not exist locally and then tries to relay it on to the appropriate MX server, which is itself and then fails and generates a bounce message. This is a bit annoying as I have set up postfix to only accept valid addresses. I have set the transport_maps, local_recipient_maps and relay_domains to the files generated by MM3. I run an older version of MM3 (3.0) but prefer to fix this without upgrading as upgrading is a relatively big undertaking. This is mostly a backscatter problem for spam I guess. Any ideas of very simple and easy to forget things that I've probably missed? Cheers // David

5 6

Re: [Mailman-Developers] Re: SSL error while connecting to hyperkitty
by Abhilash Raj Nov. 29, 2023

Nov. 29, 2023

On Sat, Aug 31, 2019, at 10:20 AM, sandeep kumar wrote: > Hi Abhilash > > Thanks for the reply. > > Just two more answers please -:) > > Can I use the sample apache.conf in example_project in my webserver virtual host...?? See this thread for the apache configuration: https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… You'd need to adjust the paths and SSL configuration. > > And what should be the configuration details to be given in uwsgi server...?? http://docs.mailman3.org/en/latest/prodsetup.html#setting-up-a-wsgi-server > > Regards > Sandeep > > > On Sat, Aug 31, 2019 at 10:25 PM Abhilash Raj <maxking(a)asynchronous.in> wrote: >> __ >> On Sat, Aug 31, 2019, at 8:49 AM, sandeep kumar wrote: >>> Hi Abhilash >>> >>> Thanks for your reply. -:) >>> >>> We are using apache httpd as webserver to redirect. >>> >>> the proxy pass in webserver is >>> >>> ProxyPass / http://localhost:8000 >>> ReverseProxyPass / http://localhost:8000 >> >> >> Can you put `base_url: http://localhost:8000/hyperkitty` in your mailman-hyperkitty.cfg and see that it works? :) >> >> This should not try any funny SSL redirection. >> >>> I don't have idea of deploying this in production, so I just went on searching and I found wsgi (say uwsgi) is required to send the requests from webserver to mailman. Correct me if I am wrong. >>> >>> I have few queries listed below. Please reply to them. >>> >>> Should I use the wsgi.py present in the directory of mailman-suite ...?? >> >> Yes, that is the one which is supposed to be used. >> >>> >>> What should be the ProxyPass ..?? Where should the first hit go from webserver ---> uwsgi ---> ?? >> >> uwsgi is web server running Mailman's web componenet. It doesn't need to hit anything. You can restart it directly when you want to restart Mailman's web component, you don't need to do anything to your web server (httpd) for this. >> >> >> >>> >>> Can we run "python manage.py runserver" every time to start mailman suite..?? Can we make mailman-suite start/stop just by restarting the HTTPD..?? >> >> >> No, use a wsgi server, like uwsgi or gunicorn to run mailman-suote. `python manage.runserver` is a command used during development shouldn't be used at all in prod. >> >>> >>> What should be the entry in Hyperkitty.cfg file after all the above steps..?? I mean at the end >>> >>> Please reply to the above queries. Thanks for your help >>> Regards >>> Sandeep >>> >>> >>> >>> >>> >>> On Sat, Aug 31, 2019 at 8:45 PM Abhilash Raj <maxking(a)asynchronous.in> wrote: >>>> On Sat, Aug 31, 2019, at 1:36 AM, sandeep kumar wrote: >>>> > Hi Team >>>> > >>>> > Iam seeing following errors while mailman is trying to archive in >>>> > mailman.log >>>> > >>>> > >>>> > This is my base URL in mailman-hyperkitty.cfg >>>> > >>>> > base_url: http://localhost/hyperkitty >>>> >>>> Are you sure this is the URL? this is http and Mailman shouldn't try to connect to this using HTTPS. >>>> >>>> Is your web server configured to redirect all HTTP traffic to HTTPS? If that is the case, then it is going to fail. >>>> >>>> Which wsgi server are you using? uwsgi? >>>> >>>> Can you also show your ProxyPass configuration? >>>> >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > *During handling of the above exception, another exception >>>> > occurred:Traceback (most recent call last): File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/adapters.py", >>>> > line 449, in send timeout=timeout File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/urllib3-1.24.1-py3.6.egg/urllib3/connectionpool.py", >>>> > line 638, in urlopen _stacktrace=sys.exc_info()[2]) File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/urllib3-1.24.1-py3.6.egg/urllib3/util/retry.py", >>>> > line 398, in increment raise MaxRetryError(_pool, url, error or >>>> > ResponseError(cause))urllib3.exceptions.MaxRetryError: >>>> > HTTPSConnectionPool(host='domain.com <http://domain.com>', port=443): >>>> > Max >>>> > retries exceeded with url: >>>> > /hyperkitty/api/mailman/archive?key=SecretArchiverAPIKey (Caused by >>>> > SSLError(SSLError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate >>>> > verify >>>> > failed (_ssl.c:841)'),))During handling of the above exception, another >>>> > exception occurred:Traceback (most recent call last): File >>>> > "/var/lib/mailman/mailman-hyperkitty/mailman_hyperkitty/__init__.py", >>>> > line >>>> > 154, in _archive_message url = self._send_message(mlist, msg) File >>>> > "/var/lib/mailman/mailman-hyperkitty/mailman_hyperkitty/__init__.py", >>>> > line >>>> > 201, in _send_message files={"message": ("message.txt", >>>> > message_text)}) >>>> > File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/api.py", >>>> > line 116, in post return request('post', url, data=data, json=json, >>>> > **kwargs) File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/api.py", >>>> > line 60, in request return session.request(method=method, url=url, >>>> > **kwargs) File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/sessions.py", >>>> > line 533, in request resp = self.send(prep, **send_kwargs) File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/sessions.py", >>>> > line 668, in send history = [resp for resp in gen] if allow_redirects >>>> > else [] File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/sessions.py", >>>> > line 668, in <listcomp> history = [resp for resp in gen] if >>>> > allow_redirects else [] File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/sessions.py", >>>> > line 247, in resolve_redirects **adapter_kwargs File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/sessions.py", >>>> > line 646, in send r = adapter.send(request, **kwargs) File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/adapters.py", >>>> > line 514, in send raise SSLError(e, >>>> > request=request)requests.exceptions.SSLError: >>>> > HTTPSConnectionPool(host=domain.com <http://domain.com>', port=443): Max >>>> > retries exceeded with url: >>>> > /hyperkitty/api/mailman/archive?key=SecretArchiverAPIKey (Caused by >>>> > SSLError(SSLError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate >>>> > verify >>>> > failed (_ssl.c:841)'),))* >>>> > >>>> > >>>> > Rgrds >>>> > Sandeep >>>> > >>>> > On Sat, Aug 31, 2019 at 10:20 AM sandeep kumar <sandeep7790(a)gmail.com> >>>> > wrote: >>>> > >>>> > > Team any help >>>> > > >>>> > > Sent from my iPhone >>>> > > >>>> > > > On 30-Aug-2019, at 11:18 PM, sandeep kumar <sandeep7790(a)gmail.com> >>>> > > wrote: >>>> > > > >>>> > > > Hi Team >>>> > > > >>>> > > > Iam using httpd to work with ssl on mailman 3 using proxy pass. >>>> > > > >>>> > > > After this configuration Iam not able to connect to hyperkitty. It is >>>> > > throwing ssl certificate error in mailman.log file. >>>> > > > >>>> > > > What should be the configuration of hyperkitty while using https in >>>> > > mailman..? >>>> > > > >>>> > > > Please help me with this Iam struck here from past 4 days >>>> > > > >>>> > > > Rgrds >>>> > > > Sandeep >>>> > > > >>>> > > > Sent from my iPhone >>>> > > >>>> > >>>> > >>>> > -- >>>> > Regards >>>> > Sandeep Kumar >>>> > +91-9642669192 >>>> > _______________________________________________ >>>> > Mailman-Developers mailing list -- mailman-developers(a)python.org >>>> > To unsubscribe send an email to mailman-developers-leave(a)python.org >>>> > https://mail.python.org/mailman3/lists/mailman-developers.python.org/ >>>> > Mailman FAQ: https://wiki.list.org/x/AgA3 >>>> > >>>> > Security Policy: https://wiki.list.org/x/QIA9 >>>> > >>>> >>>> -- >>>> thanks, >>>> Abhilash Raj (maxking) >>> >>> >>> -- >>> Regards >>> Sandeep Kumar >>> +91-9642669192 >>> >> >> -- >> thanks, >> Abhilash Raj (maxking) >> >> > > > -- > Regards > Sandeep Kumar > +91-9642669192 > -- thanks, Abhilash Raj (maxking)

4 3

Mailman3 stopped sending out mail
by Abhijith PA Nov. 22, 2023

Nov. 22, 2023

Hello. Recently my mailman3 instance stopped distributing mail. But mailman's own mail (notification, digest etc) and archiving are working OK. I couldn't figure what is going wrong From mail.log --- Dec 31 10:03:20 lists postfix/smtpd[10900]: Anonymous TLS connection established from mail.xxxx.xx[5.79.72.163]: TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits) Dec 31 10:03:20 lists postfix/smtpd[10900]: Anonymous TLS connection established from mail.xxxx.xx[5.79.72.163]: TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits) Dec 31 10:03:20 lists policyd-spf[10907]: prepend Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=5.79.72.163; helo=mail.xxxx.xx; envelope-from=abhijith(a)xxxx.xx; receiver=<UNKNOWN> Dec 31 10:03:20 lists policyd-spf[10907]: prepend Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=5.79.72.163; helo=mail.xxxx.xx; envelope-from=abhijith(a)xxxx.xx; receiver=<UNKNOWN> Dec 31 10:03:21 lists postfix/smtpd[10900]: 04C2412038F: client=mail.xxxx.xx[5.79.72.163] Dec 31 10:03:21 lists postfix/smtpd[10900]: 04C2412038F: client=mail.xxxx.xx[5.79.72.163] Dec 31 10:03:21 lists postfix/cleanup[10912]: 04C2412038F: message-id=<f875c144-a23c-baa2-7de2-1b102d3e7494(a)xxxx.xx> Dec 31 10:03:21 lists postfix/cleanup[10912]: 04C2412038F: message-id=<f875c144-a23c-baa2-7de2-1b102d3e7494(a)xxxx.xx> Dec 31 10:03:21 lists opendkim[450]: 04C2412038F: s=_teknikKey d=xxxx.xx SSL Dec 31 10:03:21 lists opendkim[450]: 04C2412038F: s=_teknikKey d=xxxx.xx SSL Dec 31 10:03:21 lists postfix/smtpd[10900]: disconnect from mail.xxxx.xx[5.79.72.163] ehlo=2 starttls=1 mail=1 rcpt=1 data=1 quit=1 commands=7 Dec 31 10:03:21 lists postfix/smtpd[10900]: disconnect from mail.xxxx.xx[5.79.72.163] ehlo=2 starttls=1 mail=1 rcpt=1 data=1 quit=1 commands=7 Dec 31 10:03:21 lists postfix/qmgr[13211]: 04C2412038F: from=<abhijith(a)xxxx.xx>, size=1699, nrcpt=1 (queue active) Dec 31 10:03:21 lists postfix/qmgr[13211]: 04C2412038F: from=<abhijith(a)xxxx.xx>, size=1699, nrcpt=1 (queue active) Dec 31 10:03:21 lists postfix/lmtp[10915]: 04C2412038F: to=<test3(a)lists.yyyy.yy>, relay=127.0.0.1[127.0.0.1]:8024, delay=0.87, delays=0.62/0.02/0.04/0.2, dsn=2.0.0, status=sent (250 Ok) Dec 31 10:03:21 lists postfix/lmtp[10915]: 04C2412038F: to=<test3(a)lists.yyyy.yy>, relay=127.0.0.1[127.0.0.1]:8024, delay=0.87, delays=0.62/0.02/0.04/0.2, dsn=2.0.0, status=sent (250 Ok) Dec 31 10:03:21 lists postfix/qmgr[13211]: 04C2412038F: removed Dec 31 10:03:21 lists postfix/qmgr[13211]: 04C2412038F: removed I am not sure why 'postfix/qmgr[13211]: 04C2412038F: removed' is happening. from /var/log/mailman3/smtp.log: Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) handling connection Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) Data: b'LHLO lists.xxxx.xx' Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) Data: b'MAIL FROM:<abhijith(a)xxxx.xx>' Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) sender: abhijith(a)xxxx.xx Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) Data: b'RCPT TO:<test3(a)xxxx.xx>' Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) recip: test3(a)xxxx.xx Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) Data: b'DATA' Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) Data: b'QUIT' Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) connection lost Dec 31 10:03:21 2018 (6323) Connection lost during _handle_client() Here again I am doubtful about 'Connection lost during _handle_client()'. Please help. Abhijith PA

3 5

Mailman 3 - Header Filter
by Thomas Lehker Sept. 25, 2023

Sept. 25, 2023

I am a Mailman neophyte and need help with filtering posts based on the subject field. We have a few list owners that want 'Out of Office' replies discarded. When using the below syntax in Postorius/Header filter the post is not discarded but ends up in 'Held Messages'. Is there any syntax I am missing or a setting in the lists that needs to be disabled/enabled to get these posts dropped? Any help is much appreciated. Header: ^subject: subject: subject Pattern: Automatic Reply 'Automatic Reply' "Automatic Reply" Action: Discard DISCLAIMER: The information contained in this message is privileged and confidential. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please reply to the message and delete/destroy any copy of this message. Information in this message that does not relate to the official business of the firm shall be understood as neither given nor endorsed by it.

4 4

Importing mbox files into archive defect with lines with From
by andrew.bernard＠gmail.com Sept. 19, 2023

Sept. 19, 2023

A curious problem, but seems to be well defined. I am importing mbox format files with 25 years worth of archives in 250 files from a Listserv list into hyperkitty. All is going swimmingly, except I get lots of partial emails with sender of None put into the current month, with text that has clearly been truncated. As I look at each one, I see that the line in the imported text is immediately after a line starting with 'From'. Clearly, 'From:' is an RCS-82 header, but 'From ' is not, and yet there is much evidence here that this is messing up the import. Is this a known bug? If not, how do I report it?

8 15

Strange issue with bounce processing
by Brian Carpenter Sept. 13, 2023

Sept. 13, 2023

Dear List, First of all Merry Christmas to those of you that are observing it. I have an issue on one of my Mailman 3 servers. The bounce runner is not running, even after restarting mailman core. All the other runners are working fine. Here is the problem, after restarting it, a number of messages show up in queue/bounces from a single list. However the bounce runner is still not running. So I remove these messages from queue/bounces folder and restart mailman core. The same messages show up from the same single list again in queue/bounces. In the var/logs/bounce.log file, addresses from this list are being logged as being removed after starting mailman core. They correlate with the messages showing up in queue/bounces. I assume these "cached" bounces are what is interfering with the running of the bounce runner. I don't see anything in the mailman or mailmansuite log that would explain this behavior. How can I fix this? Thank you for any assistance. -- Brian Carpenter Harmonylists.com Emwd.com

3 6

Mailman REST API not available. Please start Mailman core.
by joseverde＠gmail.com Sept. 4, 2023

Sept. 4, 2023

Okay, so I got the webservice of Mailman3 up and running, but when I go to mailman3/postorius/lists/, I get the following error: Something went wrong Mailman REST API not available. Please start Mailman core. When I logged in to the admin user, it threw a server 500 error, but I could refresh and see myself logged in. If I try to go to lists or mailman settings, however, I get the error above.

4 15

where do I find the text of a bounce email ?
by Per Jessen July 1, 2023

July 1, 2023

All, I am trying to figure why a particular outbound message was bounced, so I'm looking for the text of the NDR that was sent - where do I find that ? Fyi, the outbound message was accepted by the first relay, and then presumably later bounced by the actual recipient server (Office365). Any and all hints much appreciated. -- Per Jessen, Zürich (4.6°C) Member, openSUSE Heroes

3 5

Delete Django profiles not signed up to a list
by Andrew Hodgson April 2, 2023

April 2, 2023

Hi, I have noticed recently I have around 2000 bogus sign-ups that have created accounts in Django. Looking through the logs these have come from the Postorius sign-up pages. I checked and email confirmation is required before the accounts are created and the email addresses that have been used do seem like they could respond to these requests. I don't want to add captchas to the form right now but is there any way to clean out these users from the database perhaps periodically based on whether the accounts are subscribed to any list? Thanks. Andrew.

6 13

Fwd: [Django] ERROR (EXTERNAL IP): Internal Server Error: /mailman3/hyperkitty/api/mailman/archive
by Gordon Dickens Dec. 13, 2022

Dec. 13, 2022

My mailman3 installation has now been up and running successfully for several weeks without any issues and then the following error message was emailed to me by my server. What's up with this error message and what do I need to do? Thanks, Gordon -------- Forwarded Message -------- Subject: [Django] ERROR (EXTERNAL IP): Internal Server Error: /mailman3/hyperkitty/api/mailman/archive Date: Fri, 20 Nov 2020 01:25:41 -0000 From: [1]root(a)host2.mailhub4u.com To: [2]gordon(a)mailhub4u.com Internal Server Error: /mailman3/hyperkitty/api/mailman/archive OperationalError at /hyperkitty/api/mailman/archive (1366, "Incorrect string value: '\\xF0\\x9F\\xA4\\xA3\\xF0\\x9F...' for column `mailman3web`.`hyperkitty_email`.`content` at row 1") Request Method: POST Request URL: [3]http://localhost/mailman3/hyperkitty/api/mailman/archive?key=0123456 789abcdef0123456789ABCDEF Django Version: 1.11.29 Python Executable: /usr/bin/uwsgi-core Python Version: 3.7.3 Python Path: ['.', '', '/usr/lib/python37.zip', '/usr/lib/python3.7', '/usr/lib/python3.7/lib-dynload', '/usr/local/lib/python3.7/dist-packages', '/usr/lib/python3/dist-packages'] Server time: Fri, 20 Nov 2020 01:25:40 +0000 Installed Applications: ('hyperkitty', 'postorius', 'django_mailman3', 'django.contrib.admin', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.staticfiles', 'rest_framework', 'django_gravatar', 'compressor', 'haystack', 'django_extensions', 'django_q', 'allauth', 'allauth.account', 'allauth.socialaccount') Installed Middleware: ('django.contrib.sessions.middleware.SessionMiddleware', 'django.middleware.common.CommonMiddleware', 'django.middleware.csrf.CsrfViewMiddleware', 'django.middleware.locale.LocaleMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', 'django.contrib.messages.middleware.MessageMiddleware', 'django.middleware.clickjacking.XFrameOptionsMiddleware', 'django.middleware.security.SecurityMiddleware', 'django_mailman3.middleware.TimezoneMiddleware', 'postorius.middleware.PostoriusMiddleware') Traceback: File "/usr/lib/python3/dist-packages/django/db/backends/utils.py" in execute 64. return self.cursor.execute(sql, params) File "/usr/lib/python3/dist-packages/django/db/backends/mysql/base.py" in execute 101. return self.cursor.execute(query, args) File "/usr/lib/python3/dist-packages/MySQLdb/cursors.py" in execute 250. self.errorhandler(self, exc, value) File "/usr/lib/python3/dist-packages/MySQLdb/connections.py" in defaulterrorhandler 50. raise errorvalue File "/usr/lib/python3/dist-packages/MySQLdb/cursors.py" in execute 247. res = self._query(query) File "/usr/lib/python3/dist-packages/MySQLdb/cursors.py" in _query 411. rowcount = self._do_query(q) File "/usr/lib/python3/dist-packages/MySQLdb/cursors.py" in _do_query 374. db.query(q) File "/usr/lib/python3/dist-packages/MySQLdb/connections.py" in query 292. _mysql.connection.query(self, query) The above exception ((1366, "Incorrect string value: '\\xF0\\x9F\\xA4\\xA3\\xF0\\x9F...' for column `mailman3web`.`hyperkitty_email`.`content` at row 1")) was the direct cause of the following exception: File "/usr/lib/python3/dist-packages/django/core/handlers/exception.py" in inner 41. response = get_response(request) File "/usr/lib/python3/dist-packages/django/core/handlers/base.py" in _get_response 187. response = self.process_exception_by_middleware(e, request) File "/usr/lib/python3/dist-packages/django/core/handlers/base.py" in _get_response 185. response = wrapped_callback(request, *callback_args, **callback_kwargs) File "/usr/lib/python3/dist-packages/django/views/decorators/http.py" in inner 40. return func(request, *args, **kwargs) File "/usr/lib/python3/dist-packages/hyperkitty/views/mailman.py" in _decorator 69. return func(request, *args, **kwargs) File "/usr/lib/python3/dist-packages/django/views/decorators/csrf.py" in wrapped_view 58. return view_func(*args, **kwargs) File "/usr/lib/python3/dist-packages/hyperkitty/views/mailman.py" in archive 115. add_to_list(mlist_fqdn, msg) File "/usr/lib/python3/dist-packages/hyperkitty/lib/incoming.py" in add_to_list 151. email.save() File "/usr/lib/python3/dist-packages/django/db/models/base.py" in save 808. force_update=force_update, update_fields=update_fields) File "/usr/lib/python3/dist-packages/django/db/models/base.py" in save_base 838. updated = self._save_table(raw, cls, force_insert, force_update, using, update_fields) File "/usr/lib/python3/dist-packages/django/db/models/base.py" in _save_table 924. result = self._do_insert(cls._base_manager, using, fields, update_pk, raw) File "/usr/lib/python3/dist-packages/django/db/models/base.py" in _do_insert 963. using=using, raw=raw) File "/usr/lib/python3/dist-packages/django/db/models/manager.py" in manager_method 85. return getattr(self.get_queryset(), name)(*args, **kwargs) File "/usr/lib/python3/dist-packages/django/db/models/query.py" in _insert 1079. return query.get_compiler(using=using).execute_sql(return_id) File "/usr/lib/python3/dist-packages/django/db/models/sql/compiler.py" in execute_sql 1112. cursor.execute(sql, params) File "/usr/lib/python3/dist-packages/django/db/backends/utils.py" in execute 64. return self.cursor.execute(sql, params) File "/usr/lib/python3/dist-packages/django/db/utils.py" in __exit__ 94. six.reraise(dj_exc_type, dj_exc_value, traceback) File "/usr/lib/python3/dist-packages/django/utils/six.py" in reraise 685. raise value.with_traceback(tb) File "/usr/lib/python3/dist-packages/django/db/backends/utils.py" in execute 64. return self.cursor.execute(sql, params) File "/usr/lib/python3/dist-packages/django/db/backends/mysql/base.py" in execute 101. return self.cursor.execute(query, args) File "/usr/lib/python3/dist-packages/MySQLdb/cursors.py" in execute 250. self.errorhandler(self, exc, value) File "/usr/lib/python3/dist-packages/MySQLdb/connections.py" in defaulterrorhandler 50. raise errorvalue File "/usr/lib/python3/dist-packages/MySQLdb/cursors.py" in execute 247. res = self._query(query) File "/usr/lib/python3/dist-packages/MySQLdb/cursors.py" in _query 411. rowcount = self._do_query(q) File "/usr/lib/python3/dist-packages/MySQLdb/cursors.py" in _do_query 374. db.query(q) File "/usr/lib/python3/dist-packages/MySQLdb/connections.py" in query 292. _mysql.connection.query(self, query) Exception Type: OperationalError at /hyperkitty/api/mailman/archive Exception Value: (1366, "Incorrect string value: '\\xF0\\x9F\\xA4\\xA3\\xF0\\x9F...' for column `mailman3web`.`hyperkitty_email`.`content` at row 1") Request information: USER: AnonymousUser GET: key = '0123456789abcdef0123456789ABCDEF' POST: mlist = '[4]members(a)georgiajets.org' FILES: message = <InMemoryUploadedFile: message.txt ()> COOKIES: No cookie data META: CONTENT_LENGTH = '7720' CONTENT_TYPE = 'multipart/form-data; boundary=8da553dce5f76815f62f12a1b8c0efac' CONTEXT_DOCUMENT_ROOT = '/var/www/html' CONTEXT_PREFIX = '' DOCUMENT_ROOT = '/var/www/html' GATEWAY_INTERFACE = 'CGI/1.1' HTTP_ACCEPT = '*/*' HTTP_ACCEPT_ENCODING = 'gzip, deflate' HTTP_CONNECTION = 'keep-alive' HTTP_HOST = 'localhost' HTTP_USER_AGENT = 'python-requests/2.21.0' PATH = '/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin' PATH_INFO = '/hyperkitty/api/mailman/archive' QUERY_STRING = 'key=0123456789abcdef0123456789ABCDEF' REMOTE_ADDR = '127.0.0.1' REMOTE_PORT = '53006' REQUEST_METHOD = 'POST' REQUEST_SCHEME = 'http' REQUEST_URI = '/mailman3/hyperkitty/api/mailman/archive?key=0123456789abcdef012345678 9ABCDEF' SCRIPT_FILENAME = 'proxy:uwsgi://localhost//hyperkitty/api/mailman/archive' SCRIPT_NAME = '/mailman3' SERVER_ADDR = '127.0.0.1' SERVER_ADMIN = 'webmaster@localhost' SERVER_NAME = 'localhost' SERVER_PORT = '80' SERVER_PROTOCOL = 'HTTP/1.1' SERVER_SIGNATURE = '<address>Apache/2.4.38 (Debian) Server at localhost Port 80</address>\n' SERVER_SOFTWARE = 'Apache/2.4.38 (Debian)' uwsgi.core = 0 uwsgi.node = b'slc.mailhub4u.com' uwsgi.version = b'2.0.18-debian' wsgi.errors = <_io.TextIOWrapper name=2 mode='w' encoding='UTF-8'> wsgi.file_wrapper = '' wsgi.input = <uwsgi._Input object at 0x7f6a278df600> wsgi.multiprocess = False wsgi.multithread = True wsgi.run_once = False wsgi.url_scheme = 'http' wsgi.version = '(1, 0)' Settings: Using settings module settings ABSOLUTE_URL_OVERRIDES = {} ACCOUNT_AUTHENTICATION_METHOD = 'username_email' ACCOUNT_DEFAULT_HTTP_PROTOCOL = 'https' ACCOUNT_EMAIL_REQUIRED = True ACCOUNT_EMAIL_VERIFICATION = 'mandatory' ACCOUNT_UNIQUE_EMAIL = True ADMINS = "(('Mailman Suite Admin', '[5]gordon(a)mailhub4u.com'),)" ALLOWED_HOSTS = ['*'] APPEND_SLASH = True AUTHENTICATION_BACKENDS = "('django.contrib.auth.backends.ModelBackend', 'allauth.account.auth_backends.AuthenticationBackend')" AUTH_PASSWORD_VALIDATORS = '********************' AUTH_USER_MODEL = 'auth.User' BASE_DIR = '/usr/share/mailman3-web' CACHES = {'default': {'BACKEND': 'django.core.cache.backends.locmem.LocMemCache'}} CACHE_MIDDLEWARE_ALIAS = 'default' CACHE_MIDDLEWARE_KEY_PREFIX = '********************' CACHE_MIDDLEWARE_SECONDS = 600 COMPRESS_CACHEABLE_PRECOMPILERS = '()' COMPRESS_CACHE_BACKEND = 'default' COMPRESS_CACHE_KEY_FUNCTION = '********************' COMPRESS_CLEAN_CSS_ARGUMENTS = '' COMPRESS_CLEAN_CSS_BINARY = 'cleancss' COMPRESS_CLOSURE_COMPILER_ARGUMENTS = '' COMPRESS_CLOSURE_COMPILER_BINARY = 'java -jar compiler.jar' COMPRESS_CSS_COMPRESSOR = 'compressor.css.CssCompressor' COMPRESS_CSS_FILTERS = ['compressor.filters.css_default.CssAbsoluteFilter'] COMPRESS_CSS_HASHING_METHOD = 'mtime' COMPRESS_DATA_URI_MAX_SIZE = 1024 COMPRESS_DEBUG_TOGGLE = None COMPRESS_ENABLED = True COMPRESS_JINJA2_GET_ENVIRONMENT = <function CompressorConf.JINJA2_GET_ENVIRONMENT at 0x7f6a2d586620> COMPRESS_JS_COMPRESSOR = 'compressor.js.JsCompressor' COMPRESS_JS_FILTERS = ['compressor.filters.jsmin.JSMinFilter'] COMPRESS_MINT_DELAY = 30 COMPRESS_MTIME_DELAY = 10 COMPRESS_OFFLINE = True COMPRESS_OFFLINE_CONTEXT = {'STATIC_URL': '/mailman3/static/'} COMPRESS_OFFLINE_MANIFEST = 'manifest.json' COMPRESS_OFFLINE_TIMEOUT = 31536000 COMPRESS_OUTPUT_DIR = 'CACHE' COMPRESS_PARSER = 'compressor.parser.AutoSelectParser' COMPRESS_PRECOMPILERS = "(('text/less', 'lessc {infile} {outfile}'), ('text/x-scss', 'sassc -t compressed {infile} {outfile}'), ('text/x-sass', 'sassc -t compressed {infile} {outfile}'))" COMPRESS_REBUILD_TIMEOUT = 2592000 COMPRESS_ROOT = '/var/lib/mailman3/web/static' COMPRESS_STORAGE = 'compressor.storage.CompressorFileStorage' COMPRESS_TEMPLATE_FILTER_CONTEXT = {'STATIC_URL': '/mailman3/static/'} COMPRESS_URL = '/mailman3/static/' COMPRESS_URL_PLACEHOLDER = '/__compressor_url_placeholder__/' COMPRESS_VERBOSE = False COMPRESS_YUGLIFY_BINARY = 'yuglify' COMPRESS_YUGLIFY_CSS_ARGUMENTS = '--terminal' COMPRESS_YUGLIFY_JS_ARGUMENTS = '--terminal' COMPRESS_YUI_BINARY = 'java -jar yuicompressor.jar' COMPRESS_YUI_CSS_ARGUMENTS = '' COMPRESS_YUI_JS_ARGUMENTS = '' CSRF_COOKIE_AGE = 31449600 CSRF_COOKIE_DOMAIN = None CSRF_COOKIE_HTTPONLY = False CSRF_COOKIE_NAME = 'csrftoken' CSRF_COOKIE_PATH = '/' CSRF_COOKIE_SECURE = False CSRF_FAILURE_VIEW = 'django.views.csrf.csrf_failure' CSRF_HEADER_NAME = 'HTTP_X_CSRFTOKEN' CSRF_TRUSTED_ORIGINS = [] CSRF_USE_SESSIONS = False DATABASES = {'default': {'ENGINE': 'django.db.backends.mysql', 'NAME': 'mailman3web', 'USER': 'mailman3web', 'PASSWORD': '********************', 'HOST': 'localhost', 'PORT': '', 'OPTIONS': {'init_command': "SET sql_mode='STRICT_TRANS_TABLES'"}, 'ATOMIC_REQUESTS': False, 'AUTOCOMMIT': True, 'CONN_MAX_AGE': 0, 'TIME_ZONE': None, 'TEST': {'CHARSET': None, 'COLLATION': None, 'NAME': None, 'MIRROR': None}}} DATABASE_ROUTERS = [] DATA_UPLOAD_MAX_MEMORY_SIZE = 2621440 DATA_UPLOAD_MAX_NUMBER_FIELDS = 1000 DATETIME_FORMAT = 'N j, Y, P' DATETIME_INPUT_FORMATS = ['%Y-%m-%d %H:%M:%S', '%Y-%m-%d %H:%M:%S.%f', '%Y-%m-%d %H:%M', '%Y-%m-%d', '%m/%d/%Y %H:%M:%S', '%m/%d/%Y %H:%M:%S.%f', '%m/%d/%Y %H:%M', '%m/%d/%Y', '%m/%d/%y %H:%M:%S', '%m/%d/%y %H:%M:%S.%f', '%m/%d/%y %H:%M', '%m/%d/%y'] DATE_FORMAT = 'N j, Y' DATE_INPUT_FORMATS = ['%Y-%m-%d', '%m/%d/%Y', '%m/%d/%y', '%b %d %Y', '%b %d, %Y', '%d %b %Y', '%d %b, %Y', '%B %d %Y', '%B %d, %Y', '%d %B %Y', '%d %B, %Y'] DEBUG = False DEBUG_PROPAGATE_EXCEPTIONS = False DECIMAL_SEPARATOR = '.' DEFAULT_CHARSET = 'utf-8' DEFAULT_CONTENT_TYPE = 'text/html' DEFAULT_EXCEPTION_REPORTER_FILTER = 'django.views.debug.SafeExceptionReporterFilter' DEFAULT_FILE_STORAGE = 'django.core.files.storage.FileSystemStorage' DEFAULT_FROM_EMAIL = '[6]postorius(a)host2.mailhub4u.com' DEFAULT_INDEX_TABLESPACE = '' DEFAULT_TABLESPACE = '' DISALLOWED_USER_AGENTS = [] EMAILNAME = 'host2.mailhub4u.com' EMAIL_BACKEND = 'django.core.mail.backends.smtp.EmailBackend' EMAIL_HOST = 'localhost' EMAIL_HOST_PASSWORD = '********************' EMAIL_HOST_USER = '' EMAIL_PORT = 25 EMAIL_SSL_CERTFILE = None EMAIL_SSL_KEYFILE = '********************' EMAIL_SUBJECT_PREFIX = '[Django] ' EMAIL_TIMEOUT = None EMAIL_USE_LOCALTIME = False EMAIL_USE_SSL = False EMAIL_USE_TLS = False FILE_CHARSET = 'utf-8' FILE_UPLOAD_DIRECTORY_PERMISSIONS = None FILE_UPLOAD_HANDLERS = ['django.core.files.uploadhandler.MemoryFileUploadHandler', 'django.core.files.uploadhandler.TemporaryFileUploadHandler'] FILE_UPLOAD_MAX_MEMORY_SIZE = 2621440 FILE_UPLOAD_PERMISSIONS = None FILE_UPLOAD_TEMP_DIR = None FILTER_VHOST = False FIRST_DAY_OF_WEEK = 0 FIXTURE_DIRS = [] FORCE_SCRIPT_NAME = None FORMAT_MODULE_PATH = None FORM_RENDERER = 'django.forms.renderers.DjangoTemplates' HAYSTACK_CONNECTIONS = {'default': {'ENGINE': 'haystack.backends.whoosh_backend.WhooshEngine', 'PATH': '/var/lib/mailman3/web/fulltext_index'}} HOSTNAME = 'localhost.local' IGNORABLE_404_URLS = [] INSTALLED_APPS = "('hyperkitty', 'postorius', 'django_mailman3', 'django.contrib.admin', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.staticfiles', 'rest_framework', 'django_gravatar', 'compressor', 'haystack', 'django_extensions', 'django_q', 'allauth', 'allauth.account', 'allauth.socialaccount')" INTERNAL_IPS = [] LANGUAGES = [('af', 'Afrikaans'), ('ar', 'Arabic'), ('ast', 'Asturian'), ('az', 'Azerbaijani'), ('bg', 'Bulgarian'), ('be', 'Belarusian'), ('bn', 'Bengali'), ('br', 'Breton'), ('bs', 'Bosnian'), ('ca', 'Catalan'), ('cs', 'Czech'), ('cy', 'Welsh'), ('da', 'Danish'), ('de', 'German'), ('dsb', 'Lower Sorbian'), ('el', 'Greek'), ('en', 'English'), ('en-au', 'Australian English'), ('en-gb', 'British English'), ('eo', 'Esperanto'), ('es', 'Spanish'), ('es-ar', 'Argentinian Spanish'), ('es-co', 'Colombian Spanish'), ('es-mx', 'Mexican Spanish'), ('es-ni', 'Nicaraguan Spanish'), ('es-ve', 'Venezuelan Spanish'), ('et', 'Estonian'), ('eu', 'Basque'), ('fa', 'Persian'), ('fi', 'Finnish'), ('fr', 'French'), ('fy', 'Frisian'), ('ga', 'Irish'), ('gd', 'Scottish Gaelic'), ('gl', 'Galician'), ('he', 'Hebrew'), ('hi', 'Hindi'), ('hr', 'Croatian'), ('hsb', 'Upper Sorbian'), ('hu', 'Hungarian'), ('ia', 'Interlingua'), ('id', 'Indonesian'), ('io', 'Ido'), ('is', 'Icelandic'), ('it', 'Italian'), ('ja', 'Japanese'), ('ka', 'Georgian'), ('kk', 'Kazakh'), ('km', 'Khmer'), ('kn', 'Kannada'), ('ko', 'Korean'), ('lb', 'Luxembourgish'), ('lt', 'Lithuanian'), ('lv', 'Latvian'), ('mk', 'Macedonian'), ('ml', 'Malayalam'), ('mn', 'Mongolian'), ('mr', 'Marathi'), ('my', 'Burmese'), ('nb', 'Norwegian Bokmål'), ('ne', 'Nepali'), ('nl', 'Dutch'), ('nn', 'Norwegian Nynorsk'), ('os', 'Ossetic'), ('pa', 'Punjabi'), ('pl', 'Polish'), ('pt', 'Portuguese'), ('pt-br', 'Brazilian Portuguese'), ('ro', 'Romanian'), ('ru', 'Russian'), ('sk', 'Slovak'), ('sl', 'Slovenian'), ('sq', 'Albanian'), ('sr', 'Serbian'), ('sr-latn', 'Serbian Latin'), ('sv', 'Swedish'), ('sw', 'Swahili'), ('ta', 'Tamil'), ('te', 'Telugu'), ('th', 'Thai'), ('tr', 'Turkish'), ('tt', 'Tatar'), ('udm', 'Udmurt'), ('uk', 'Ukrainian'), ('ur', 'Urdu'), ('vi', 'Vietnamese'), ('zh-hans', 'Simplified Chinese'), ('zh-hant', 'Traditional Chinese')] LANGUAGES_BIDI = ['he', 'ar', 'fa', 'ur'] LANGUAGE_CODE = 'en-us' LANGUAGE_COOKIE_AGE = None LANGUAGE_COOKIE_DOMAIN = None LANGUAGE_COOKIE_NAME = 'django_language' LANGUAGE_COOKIE_PATH = '/' LOCALE_PATHS = [] LOGGING = {'version': 1, 'disable_existing_loggers': False, 'filters': {'require_debug_false': {'()': 'django.utils.log.RequireDebugFalse'}}, 'handlers': {'mail_admins': {'level': 'ERROR', 'filters': ['require_debug_false'], 'class': 'django.utils.log.AdminEmailHandler'}, 'file': {'level': 'INFO', 'class': 'logging.handlers.RotatingFileHandler', 'filename': '/var/log/mailman3/web/mailman-web.log', 'formatter': 'verbose'}, 'console': {'class': 'logging.StreamHandler', 'formatter': 'simple'}}, 'loggers': {'django.request': {'handlers': ['mail_admins', 'file'], 'level': 'INFO', 'propagate': True}, 'django': {'handlers': ['file'], 'level': 'INFO', 'propagate': True}, 'hyperkitty': {'handlers': ['file'], 'level': 'INFO', 'propagate': True}, 'postorius': {'handlers': ['file'], 'level': 'INFO', 'propagate': True}}, 'formatters': {'verbose': {'format': '%(levelname)s %(asctime)s %(process)d %(name)s %(message)s'}, 'simple': {'format': '%(levelname)s %(message)s'}}} LOGGING_CONFIG = 'logging.config.dictConfig' LOGIN_REDIRECT_URL = 'list_index' LOGIN_URL = 'account_login' LOGOUT_REDIRECT_URL = None LOGOUT_URL = 'account_logout' MAILMAN_ARCHIVER_FROM = "('127.0.0.1', '::1')" MAILMAN_ARCHIVER_KEY = '********************' MAILMAN_REST_API_PASS = '********************' MAILMAN_REST_API_URL = '********************' MAILMAN_REST_API_USER = '********************' MANAGERS = [] MEDIA_ROOT = '' MEDIA_URL = '' MESSAGE_STORAGE = 'django.contrib.messages.storage.fallback.FallbackStorage' MESSAGE_TAGS = {40: 'danger'} MIDDLEWARE = "('django.contrib.sessions.middleware.SessionMiddleware', 'django.middleware.common.CommonMiddleware', 'django.middleware.csrf.CsrfViewMiddleware', 'django.middleware.locale.LocaleMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', 'django.contrib.messages.middleware.MessageMiddleware', 'django.middleware.clickjacking.XFrameOptionsMiddleware', 'django.middleware.security.SecurityMiddleware', 'django_mailman3.middleware.TimezoneMiddleware', 'postorius.middleware.PostoriusMiddleware')" MIDDLEWARE_CLASSES = ['django.middleware.common.CommonMiddleware', 'django.middleware.csrf.CsrfViewMiddleware'] MIGRATION_MODULES = {} MONTH_DAY_FORMAT = 'F j' NUMBER_GROUPING = 0 PASSWORD_HASHERS = '********************' PASSWORD_RESET_TIMEOUT_DAYS = '********************' POSTORIUS_TEMPLATE_BASE_URL = '[7]http://localhost/mailman3/' PREPEND_WWW = False Q_CLUSTER = {'timeout': 300, 'save_limit': 100, 'orm': 'default', 'poll': 5} ROOT_URLCONF = 'urls' SECRET_KEY = '********************' SECURE_BROWSER_XSS_FILTER = False SECURE_CONTENT_TYPE_NOSNIFF = False SECURE_HSTS_INCLUDE_SUBDOMAINS = False SECURE_HSTS_PRELOAD = False SECURE_HSTS_SECONDS = 0 SECURE_PROXY_SSL_HEADER = None SECURE_REDIRECT_EXEMPT = [] SECURE_SSL_HOST = None SECURE_SSL_REDIRECT = False SERVER_EMAIL = '[8]root(a)host2.mailhub4u.com' SESSION_CACHE_ALIAS = 'default' SESSION_COOKIE_AGE = 1209600 SESSION_COOKIE_DOMAIN = None SESSION_COOKIE_HTTPONLY = True SESSION_COOKIE_NAME = 'sessionid' SESSION_COOKIE_PATH = '/' SESSION_COOKIE_SECURE = False SESSION_ENGINE = 'django.contrib.sessions.backends.db' SESSION_EXPIRE_AT_BROWSER_CLOSE = False SESSION_FILE_PATH = None SESSION_SAVE_EVERY_REQUEST = False SESSION_SERIALIZER = 'django.contrib.sessions.serializers.PickleSerializer' SETTINGS_MODULE = 'settings' SHORT_DATETIME_FORMAT = 'm/d/Y P' SHORT_DATE_FORMAT = 'm/d/Y' SIGNING_BACKEND = 'django.core.signing.TimestampSigner' SILENCED_SYSTEM_CHECKS = [] SITE_ID = 1 SOCIALACCOUNT_PROVIDERS = {} STATICFILES_DIRS = '()' STATICFILES_FINDERS = "('django.contrib.staticfiles.finders.FileSystemFinder', 'django.contrib.staticfiles.finders.AppDirectoriesFinder', 'compressor.finders.CompressorFinder')" STATICFILES_STORAGE = 'django.contrib.staticfiles.storage.StaticFilesStorage' STATIC_ROOT = '/var/lib/mailman3/web/static' STATIC_URL = '/mailman3/static/' TEMPLATES = [{'BACKEND': 'django.template.backends.django.DjangoTemplates', 'DIRS': [], 'APP_DIRS': True, 'OPTIONS': {'context_processors': ['django.template.context_processors.debug', 'django.template.context_processors.i18n', 'django.template.context_processors.media', 'django.template.context_processors.static', 'django.template.context_processors.tz', 'django.template.context_processors.csrf', 'django.template.context_processors.request', 'django.contrib.auth.context_processors.auth', 'django.contrib.messages.context_processors.messages', 'django_mailman3.context_processors.common', 'hyperkitty.context_processors.common', 'postorius.context_processors.postorius']}}] TEST_NON_SERIALIZED_APPS = [] TEST_RUNNER = 'django.test.runner.DiscoverRunner' THOUSAND_SEPARATOR = ',' TIME_FORMAT = 'P' TIME_INPUT_FORMATS = ['%H:%M:%S', '%H:%M:%S.%f', '%H:%M'] TIME_ZONE = 'UTC' USE_ETAGS = False USE_I18N = True USE_L10N = True USE_THOUSAND_SEPARATOR = False USE_TZ = True USE_X_FORWARDED_HOST = True USE_X_FORWARDED_PORT = False WSGI_APPLICATION = 'wsgi.application' X_FRAME_OPTIONS = 'SAMEORIGIN' YEAR_MONTH_FORMAT = 'F Y' References 1. mailto:root@host2.mailhub4u.com 2. mailto:gordon@mailhub4u.com 3. http://localhost/mailman3/hyperkitty/api/mailman/archive?key=0123456789abcd… 4. mailto:members@georgiajets.org 5. mailto:gordon@mailhub4u.com 6. mailto:postorius@host2.mailhub4u.com 7. http://localhost/mailman3/ 8. mailto:root@host2.mailhub4u.com

6 28

Using REST with CLI using curl .... help needed
by Krešimir Mihalj Aug. 27, 2022

Aug. 27, 2022

Hi ! I need simple add/delete member to list using rest ..... but all documentation is for python and not helpfull for me, .... and I need these in CLI using curl command .... To add member using CLI i tried this command: curl -d "{'list_id' : 'list.domain.com', 'subscriber' : 'user(a)email.com'}" -H 'Content-Type: application/json' --user restadmin:restpass http://localhost:8001/3.0/members and I got this response: Missing parameters: list_id, subscriber What is wrong in above command here ? ..... I need to add user: user(a)email.com to list: list(a)domain.com Also, if someone is willing to give example: delete user: user(a)email.com from list: list(a)domain.com I actually create PHP application .... but CLI example is easy to reproduce in PHP function AddUserToList($user,$lista) { $url = 'http://llocalhost:8001/3.0'; $request_url = $url . '/members'; $data = array("list_id" => $lista,"subscriber" => $user ); $postdata = json_encode($data); $ch = curl_init($request_url); curl_setopt($ch, CURLOPT_RETURNTRANSFER, true); curl_setopt($ch, CURLOPT_USERPWD, "restadmin:restpass"); curl_setopt($ch, CURLOPT_POST, 1); curl_setopt($ch, CURLOPT_POSTFIELDS, $postdata); curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1); curl_setopt($ch, CURLOPT_FOLLOWLOCATION, 1); curl_setopt($ch, CURLOPT_HTTPHEADER, array('Content-Type: application/json')); $result = curl_exec($ch); curl_close($ch); print_r ($result); } AddUserToList('user(a)email.com','list.domain.com');

6 8

Apache Conf
by Guiseppin Thomas July 26, 2022

July 26, 2022

Hi, Currently, I use a nginx configuration for mailman. It's work perfectly. I tried to do the same with Apache, but the statics files are not delivered (404). Basically, it's the same configuration: /server { listen 80; server_name mailing.ddd.fr; access_log /var/log/nginx/mailing.access.log; error_log /var/log/nginx/mailing.error.log; location /static/ { alias /opt/mailman/static/; expires 30d; } proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; location / { proxy_pass http://localhost:8000; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; } } <VirtualHost *:80> ServerName mailing.ddd.fr ErrorLog ${APACHE_LOG_DIR}/mailing.error.log CustomLog ${APACHE_LOG_DIR}/mailing.access.log combined <Location /static/> Alias "/opt/mailman/static/" </Location> <Location /> ProxyPass http://localhost:8000/ ProxyPassReverse http://localhost:8000/ ProxyPreserveHost On </Location> </VirtualHost>/ I missed something ? Thanks.

5 10

Adding user - Error 409 Subscription request already pending
by kevin＠coastalaska.org July 14, 2022

July 14, 2022

We have a couple of people trying to subscribe to our list but receive an error similar to: {"title": "409 Conflict", "description": "Subscription request already pending"} If I try to Mass Subscribe them in Postorius I get this error: HTTP Error 409: b'{"title": "409 Conflict", "description": "Subscription request already pending"}' In Postorius I don't see them hung up in Subscription requests. What to do? Thanks, Kevin

5 17

Walk-thru for Ubuntu Bionic Mailman 3 Full setup
by kelly.close＠lrewater.com July 9, 2022

July 9, 2022

I hope this is helpful to the Ubuntu folks out there. Once some critical small things were figured out, turns out it's pretty easy to get Mailman 3 running successfully under Ubuntu 18.04. The linked google doc includes my own walkthru, which includes using a cloud server image for Ubuntu 18.04 and a LAMP setup with Apache 2 and PHP, as well as Python and PostgreSQL, and the mailman3-full package that comes with that Ubuntu distribution. The walk-thru uses Postfix for mail and PostgreSQL for the back end database. https://docs.google.com/document/d/1xIcSsoNFp2nHi7r4eQys00s9a0k2sHhu1V5Plan… If you use this and see needed corrections or additions, please let me know! ~Kelly

6 21

Django errors after deleting a thread
by peter＠chubb.wattle.id.au July 6, 2022

July 6, 2022

After deleting a thread via the web interface (because it's spam), I get lots of messages from hyperkitty E.g. Internal Server Error: /hyperkitty/list/list@domain/top-threads DoesNotExist at /hyperkitty/list/list@domain/top-threads Thread matching query does not exist. Request Method: GET Request URL: https://example.com/hyperkitty/list/list@domain/top-threads Django Version: 2.2.17 Python Executable: /usr/bin/uwsgi-core Python Version: 3.8.6 Python Path: ['.', '', '/usr/lib/python38.zip', '/usr/lib/python3.8', '/usr/lib/python3.8/lib-dynload', '/usr/local/lib/python3.8/dist-packages', '/usr/lib/python3/dist-packages'] Server time: Wed, 25 Nov 2020 07:12:00 +1100 Installed Applications: ('hyperkitty', 'postorius', 'django_mailman3', 'django.contrib.admin', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.staticfiles', 'rest_framework', 'django_gravatar', 'compressor', 'haystack', 'django_extensions', 'django_q', 'allauth', 'allauth.account', 'allauth.socialaccount') Installed Middleware: ('django.contrib.sessions.middleware.SessionMiddleware', 'django.middleware.common.CommonMiddleware', 'django.middleware.csrf.CsrfViewMiddleware', 'django.middleware.locale.LocaleMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', 'django.contrib.messages.middleware.MessageMiddleware', 'django.middleware.clickjacking.XFrameOptionsMiddleware', 'django.middleware.security.SecurityMiddleware', 'django_mailman3.middleware.TimezoneMiddleware', 'postorius.middleware.PostoriusMiddleware') Traceback: File "/usr/lib/python3/dist-packages/django/core/handlers/exception.py" in inner 34. response = get_response(request) File "/usr/lib/python3/dist-packages/django/core/handlers/base.py" in _get_response 115. response = self.process_exception_by_middleware(e, request) File "/usr/lib/python3/dist-packages/django/core/handlers/base.py" in _get_response 113. response = wrapped_callback(request, *callback_args, **callback_kwargs) File "/usr/lib/python3/dist-packages/hyperkitty/lib/view_helpers.py" in inner 135. return func(request, *args, **kwargs) File "/usr/lib/python3/dist-packages/hyperkitty/views/mlist.py" in overview_top_threads 220. 'threads': mlist.top_threads, File "/usr/lib/python3/dist-packages/hyperkitty/models/mailinglist.py" in top_threads 168. return self.cached_values["top_threads"]() File "/usr/lib/python3/dist-packages/hyperkitty/models/common.py" in __call__ 59. return self.get_or_set(*args, **kwargs) File "/usr/lib/python3/dist-packages/hyperkitty/models/mailinglist.py" in get_or_set 376. return [Thread.objects.get(pk=pk) for pk in thread_ids] File "/usr/lib/python3/dist-packages/hyperkitty/models/mailinglist.py" in <listcomp> 376. return [Thread.objects.get(pk=pk) for pk in thread_ids] File "/usr/lib/python3/dist-packages/django/db/models/manager.py" in manager_method 82. return getattr(self.get_queryset(), name)(*args, **kwargs) File "/usr/lib/python3/dist-packages/django/db/models/query.py" in get 406. raise self.model.DoesNotExist( Exception Type: DoesNotExist at /hyperkitty/list/devel(a)sel4.systems/top-threads Exception Value: Thread matching query does not exist. Request information: USER: AnonymousUser GET: No GET data POST: No POST data FILES: No FILES data COOKIES: No cookie data

3 4

Manage Member(s) Mailman Settings / Display Names
by Jim Ward May 18, 2022

May 18, 2022

Mailman2 allowed me to list my members and modify a number of their attributes (display_name, etc) Postorius is a beautiful interface BUT I am evidently not finding how to manage my members to the extent that I could in Mailman2 Am I missing something?

4 7

Problem with redirection when entering alias without a / at the end
by Jens Günther March 31, 2022

March 31, 2022

Hey there, I'm using Apache2 as the webserver, configured https://mailman.xyz.de as Web host. When I want to get to Mailman Starting Page now I need to Enter the following URL: https://mailman.xyz.de/mailman3/ to be directly redirected as expected to https://mailman.xyz.de/mailman3/postorius/lists/ -> works. Problem: When leave out the slash at the end and I ONLY enter the following URL: https://mailman.xyz.de/mailman3 -> then I'm wrongly redirected to a page, taht does not exist: https://mailman.xyz.de/mailman/postorius/lists/ -> 404 Where can I change this misbehaviour? In Apache-conf everything seems as it'S in the docs, for the vHost I do not have any other custom settings. Thank you in advance. By the way: Is there an easy way to redirect directly from https://mailman.xyz.de to https://mailman.xyz.de/mailman3/postorius/lists/ -> what would be a possibility for that?

4 12

ARC
by David Krantz March 20, 2022

March 20, 2022

Hi all, Is the documentation correct that ARC should be as simple to configure in mailman 3 as to add the private DKIM key and restarting mailman? (https://mailman.readthedocs.io/en/latest/src/mailman/handlers/docs/arc_sign…) I've tried that without finding any effect in my so far limited tests. I have not found anything in logs although I might have missed looking in one. Are there any known limitations? I have previously a working DKIM signature on outgoing mail as well as correctly set up SPF in DNS and SPF-checking on received mail. The verification on incoming mail adds a few headers but I do not think that that should be an issue, neither would the DKIM signing change anything should mailman add new headers. I now run Mailman 3.2.3 (La Villa Strangiato) on Python 3.7.4. Cheers // David

6 11

list footer questions
by Mohsen Masoudfar March 14, 2022

March 14, 2022

Hi, This seems to me like basic simple questions, I have tried FAQ and other resources, with not much success. I have two questions: 1. When I send an email to a list, in gmail and yahoo I see the following text with the links at the end of the email body: _______________________________________________ Testlist_dmark1 mailing list - listname(a)domain.tlb<mailto:testlist_dmark1@newlistserv.aaas.org> To unsubscribe send an email to listname-leave(a)domain.tlb In<mailto:listname-leave@domain.tlb%0b%0bIn> outlook this is added as an attachment in the form of a TEXT file, when you open it, you see the same text. Question: Is there a way to change this, that it looks in outlook the same way as it appears in gmail/yahoo? I know MS does it own stuff sometime and we have no impact on that, but I was thinking maybe we might change the footer in a way that outlooks sees that as part of email body. 2. How may I change the format and the text in footer? I was expecting it under list > setting, in postorius, but I could not find it. Best regards Mohsen Masoudfar Lead System Analyst, IT Operation American Association for the Advancement of Science 1200 New York Ave, NW, Washington, DC 20005 202-326-7087

5 11

Time Zone Problem In Postorius
by Brian Carpenter Jan. 13, 2022

Jan. 13, 2022

I have the server TZ set to EST. I have the TZ for Postfix set to EST. I have the following set in my settings_local.py file: TIME_ZONE = 'America/New_York' USE_TZ = True However messages showing up in the pending moderation queue box shows UTC date. I am seeing this behavior in Affinity as well so I figured it is either a Mailman core setting or perhaps database? Can anyone shed light on that? Brian

5 6

Postorius & multi domain
by Gelpi Andrea Jan. 6, 2022

Jan. 6, 2022

Hi, on a fresh debian 10 (mail server) I added mailman3 with: apt-get install mailman3-full dpkg-reconfigure mailman3 dpkg-reconfigure mailman3-web The server name is webserver-A Then I log in in webserver-A/mailman3 as a superuser I created a domain for webserver-A and domain-A The I created a list-A Then I created a second domain for webserver-B and domain-B Then I added to apache config a virtual host for webserver-B I log in webserver-B as the some superuser of webserver-A and I created a list-B But when I list the lists I can see both under webserver-A and webserver-B. The some problem with archiving hyperkitty. I search internet for a while and I discovered that using FILTER_VHOST = True seems to solve the problem. >From posotrius config page: FILTER_VHOST Filter the list of available lists in Postorius and Hyperkitty depending on the domain they are being currently served from. Mailman 3 supports multiple domains in a single installation. But it doesn't work. I got err 500 form apache. Were can I find an explanation or a how to configure the system to have 2 webserver with different domains working on the some server as it was with mailman 2? P.S.: I upgrade postorius to V. 1.3.2 and djando V 2.2.12 using the packages in testing distribution. The debian 10 official postorius package is too old (1.2.24) and does not support FILTER_VHOST Thanks in advance - -- Gelpi ing. Andrea ************************************************** I documenti vitali dimostreranno la loro vitalitˆ spostandosi spontaneamente da dove li avevate lasciati a dove non riuscirete a trovarli. **************************************************

4 13

Postorius fails to show list because of a large message being held
by Gilles Filippini Dec. 22, 2021

Dec. 22, 2021

Hi, Recently a member of one of our private lists sent a message with a picture attached. Because of the large message size (23MB) it was put into the moderation queue. But since then postorius fails to open the list's page with this error: Something went wrong Mailman REST API not available. Please start Mailman core. The database logs show that it processed a request related to the held message just before failing: LOG: statement: SELECT message.id AS message_id_1, message.message_id AS message_message_id, message.message_id_hash AS message_message_id_hash, message.path AS message_path FROM message WHERE message.message_id = '<CAEcCghAdp+20jiG19jNGX06xhJ-iYvZGyyV8b-toW7LqCSv5JQ(a)mail.gmail.com>' LIMIT 1 Mailman Core logs: [2020-07-14 10:41:21 +0000] [36] [CRITICAL] WORKER TIMEOUT (pid:49) [2020-07-14 10:41:21 +0000] [49] [INFO] Worker exiting (pid: 49) [2020-07-14 10:41:22 +0000] [50] [INFO] Booting worker with pid: 50 How should I proceed to unblock the situation? Thanks, _g.

4 7

Negative number for digest size
by Gila Halpern Nov. 19, 2021

Nov. 19, 2021

If I set the digest size threshold to -1, will that make the digest size unlimited, and it will send once per period specified in the digest frequency setting?

3 4

Moderation Action Changed After Import
by Brian Carpenter Nov. 12, 2021

Nov. 12, 2021

I migrated a Mailman 2 list using import21 and the list's config.pck into a Mailman 3 list. The list owner reported back that about 98% of the list members had their moderation setting changed to Reject (with notification). He said the previous moderation was the list's default which was hold for moderation. Is such a thing possible with an import job? Is this perhaps a bug that has been reported previously? -- Brian Carpenter Harmonylists.com Emwd.com

3 10

How to change the language in mailman3
by maszap＠tin.it Aug. 19, 2021

Aug. 19, 2021

Hi everyone, from here: https://hosted.weblate.org/projects/gnu-mailman/hyperkitty/it/ I see that there is a way to change the language of mailman3, postorius and hyperkitty But I don't find how. I read that you can download the .po files for the chosen language, but I didn't understand how to use these files. Could anyone show me how to do it? Thank you in advance. Max

6 13

[MM3-users]Is it possible to grant all users the ability to Create List
by Carrie Knox July 13, 2021

July 13, 2021

Hello, Our company is evaluating mailman3 as an option for company internal list serving. One of the requirements is that anyone with access to the list server be allowed to create and manage lists. Is this possible? If so, how? Is there a "create list" role that can be added for all registered users? Thanks

5 5

List rename
by Joel Lord July 7, 2021

July 7, 2021

I'm in an odd situation where I need to rename a bunch of lists. They were all created on mailman2 originally and migrated to mailman3 (very successfully, TYVM) but the names were all originally discuss-<foo>@domain and it's very confusing to be sure you're always sending to the correct <foo>. We want to completely rename the lists to <foo>-discuss@domain. These lists do not keep archives, so if I have to resort to extracting the subscriber lists and the configs and building new lists, I'm completely fine with that. Problem is, I'm really used to MM2 and config_list and could do this without thinking using those tools... that I don't have. Running MM3 3.2.2 trying to make this happen. Any assistance I could get will be greatly appreciated. THANKS! -- Joel Lord Web Administrator, Alpha Psi Omega Grand Cast etc... etc... etc...

5 6

timezone in hyperkitty
by erlonmz＠hotmail.com May 21, 2021

May 21, 2021

How do I change the hyperkitty timezone?

7 8

Core, Hyperkitty and Postorius releases
by Abhilash Raj May 15, 2021

May 15, 2021

Hey Everyone, I am pleased to announce new stable releases for Mailman Core, Postorius, Hyperkitty. These include both new features and bug fixes. Complete change log for each components: Mailman Core 3.3.3: https://docs.mailman3.org/projects/mailman/en/latest/src/mailman/docs/NEWS.… Postorius 1.3.4 https://docs.mailman3.org/projects/postorius/en/latest/news.html Hyperkitty 1.3.4 : https://docs.mailman3.org/projects/hyperkitty/en/latest/news.html Minimum supported Python version is 3.6. You can install them using: $ pip install --upgrade postorius hyperkitty mailman We have also recently been working on making the installation instructions[1] to be more detailed and added a new FAQ[2] section for administrators where I hope to capture common questions from mailman-users list. Feedback or Merge Requests to improve these docs are welcome. You can either send an email or open an issue on Gitlab (easier to track) here[3]. [1]: https://docs.mailman3.org/en/latest/install/virtualenv.html [2]: https://docs.mailman3.org/en/latest/faq.html [3]: https://gitlab.com/mailman/mailman-suite-doc/issues Thanks to everyone who helped out with with this release and contributed if any way! :) thanks, Abhilash Raj On behalf of Mailman Core Team

4 10

Database deadlock when trying to delete a member.
by Simon Coggins April 9, 2021

April 9, 2021

Hi, I’ve got a strange error. I migrated from mailman 2.1 to 3 using the migration guide on the website and things have been working fine. But I’m in the process of testing the new syncmembers command to replace some inhouse mailman API code we wrote. I’ve tracked my problem down to what appears to be a deadlock in the postgresql database. When trying to delete certain users the SQL query hangs and never returns. After doing some tracing and tracking it down to the database, I enabled DB logging of all queries and saw that the following query was never returning: DELETE FROM member WHERE member.id = 166814 If I try to run it manually I get the same issue, in psql it never returns. mailman=# explain analyze DELETE FROM member WHERE member.id = 166814; [… 60 seconds passes…] ^CCancel request sent ERROR: canceling statement due to user request CONTEXT: while deleting tuple (2998,72) in relation "member" I’m just wondering if there are any commands or scripts I can run to verify the database and it’s constraints to see if there is some error in the database data? Or where you’d recommend I go from here? It only impacts the user on this specific list. If I add this user to another list and remove them, everything works fine. This is on a test system so I can do various testing. I’m trying to find the root cause so that I can verify my production system isn’t impacted by the same thing. Setup Details: OS: Oracle Linux 7 (Redhat) Installed using pip via virtualenv talking to a local pgsql database on the same box. Data was migrated from a mailman 2.1 install into mailman3 using migration instructions on the website. PIP Modules versions: django-mailman3 1.3.5 mailman 3.3.3 mailman-hyperkitty 1.1.0 mailmanclient 3.3.2 postorius 1.3.4 psycopg2-binary 2.8.5 RPM packages: postgresql12-12.6-1PGDG.rhel7.x86_64 postgresql12-server-12.6-1PGDG.rhel7.x86_64 postgresql12-libs-12.6-1PGDG.rhel7.x86_64 postgresql12-devel-12.6-1PGDG.rhel7.x86_64 -Simon

4 13

No digest.mmdf
by Christine March 29, 2021

March 29, 2021

I have mailman3 running now, more or less. Mailman did not send messages to my list, giving a permiission error on the digest.mmdf file, which was not there. I created the file and made list.list the owner, now it sends messages. I don't know what should have created the file or what set the permissions to the directory, I just thought I'd let you know. dagdag Christine -- dagdag is just a two character rotation of byebye

3 2

Rejection Reason for refusing a subscription request
by Brian Carpenter March 28, 2021

March 28, 2021

I was testing out the process of rejecting an incoming subscription request. Choosing the reject option for a moderated subscription request does send out a rejection notice but it gives no reason for the rejection. Please see: ------------------------------------------------------------------------ Your request to the redacted(a)redacted.com mailing list Subscription request has been rejected by the list moderator. The moderator gave the following reason for rejecting your request: "[No reason given]" Any questions or comments should be directed to the list administrator at: redacted-owner(a)redacted.com ------------------------------------------------------------------------ Is there a place somewhere in Postorius to provide a rejection reasons for moderated subscription requests? Does Mailman 3 core provide this via its REST api but it is just not revealed in Postorius yet? -- Brian Carpenter Harmonylists.com Emwd.com

3 7

rest api runner not running
by Christine March 27, 2021

March 27, 2021

Hi, I have been using mailman for about ten years, now I want to move the lists to another server, I have installed mailman3 there, most of it seems to be running, but the "rest api runner" is not. Nothing is listening on port 8001. What have I missed? What do I do to start the restapi runner? I checked the logs, I don't see anything suspicious. this is what systemctl status says: root@lists:~# systemctl status mailman3 ● mailman3.service - Mailman3 server Loaded: loaded (/lib/systemd/system/mailman3.service; enabled; vendor preset: enabled) Active: failed (Result: timeout) since Sat 2021-03-27 12:04:06 UTC; 6min ago Docs: man:mailman(1) https://mailman.readthedocs.io/ Process: 173111 ExecStart=/usr/bin/mailman -C /etc/mailman3/mailman.cfg start --force (code=killed, signal=TERM) Mar 27 12:02:36 lists systemd[1]: Starting Mailman3 server... Mar 27 12:04:06 lists systemd[1]: mailman3.service: start operation timed out. Terminating. Mar 27 12:04:06 lists systemd[1]: mailman3.service: Failed with result 'timeout'. Mar 27 12:04:06 lists systemd[1]: Failed to start Mailman3 server. There is nothing in mailman.log, nor in smtp.log dagdag Christine -- dagdag is just a two character rotation of byebye

2 1

Mixing Mailman 3 with AWS SES
by Ralph Weber March 27, 2021

March 27, 2021

I am moving the website www.t10.org from a private/corporate VM to AWS EC2s. For many years, t10.org has had very happy results with using Mailman 2 for its email reflector, and I have no real concerns about moving to Mailman 3. My bugbear is the fact that I need the following mixed bag of incoming email addresses to work in concert with each other to receive and handle emails. > t10(a)t10.org (Primary Mailman Reflector) > chair(a)t10.org (Mailman Reflector to direct messages to the T10 chair and his designates) * docs(a)t10.org (document posting mechanics - serviced by a small mountain of home-grown code code) * bbs(a)t10.org (other publicly accessible services - serviced by code that recalls the days when everything as done on a Bulletin Board System, BBS) My best guess is that the AWS Simple Email Service (SES) needs to sit in front of both Mailman and the home-grown code, to properly direct the incoming emails to the right places. The big worry is as follows... All available evidence read to date suggests that the default AWS installation of Mailman 3 assumes that Mailman 3 is the *only* receiver of emails in the configuration. If true, then putting SES in front of Mailman could be a Herculean challenge. Or... Hercules may have already cleaned the Augean Stables, and left behind a AWS Lambda function that can serve as a keystone puzzle piece for solving my dilemma. Thanks for taking the time to look at this. All the best, .Ralph FWIW Information about the current t10.org Mailman reflector can be found at https://www.t10.org/t10r.htm. T10 is primarily an open-to-the-public activity, so there are no company confidential secrets there. For those interested in the archives associated with the t10.org Mailman reflector, they are available at https://www.t10.org/pipermail/t10/ and "inquiring minds" may puzzle over the fact that the archives date back to December 1993. When Mailman 2 was installed, we converted all the Majordomo archives to Mailman 2 format.

8 15

Mysterious Bounces Being Logged
by Brian Carpenter March 27, 2021

March 27, 2021

I keep seeing bounces being recorded in logs/bounce.log that have no corresponding entry in Postfix's mail.log. For instance one address had registered about 2 dozen bounces in the past week in bounce.log and yet every single entry for this address in mail.log has a status=sent. What am I missing here? -- Brian Carpenter Harmonylists.com Emwd.com

3 6

Mailman 3 centos7 installation issues
by bader＠cchmc.org March 25, 2021

March 25, 2021

So I am working with our Linux admin to install mailman3 in centos7 following this instructions https://docs.mailman3.org/en/latest/install/virtualenv.html# (and adjusting for centos versus Debian) The install went fine with the command “pip install wheel mailman psycopg2-binary”until the config file. /etc/mailman3/mailman.cfg The /etc/mailman3 directory did not get created? Should it have? We created it and the config file But “mailman info” throws errors venv) [mailman@bmimailmandr2 var]$ mailman info Traceback (most recent call last): File "/opt/mailman/venv/lib64/python3.6/site-packages/sqlalchemy/engine/base.py", line 2336, in _wrap_pool_connect return fn() File "/opt/mailman/venv/lib64/python3.6/site-packages/sqlalchemy/pool/base.py", line 364, in connect return _ConnectionFairy._checkout(self) File "/opt/mailman/venv/lib64/python3.6/site-packages/sqlalchemy/pool/base.py", line 778, in _checkout fairy = _ConnectionRecord.checkout(pool) File "/opt/mailman/venv/lib64/python3.6/site-packages/sqlalchemy/pool/base.py", line 495, in checkout rec = pool._do_get() File "/opt/mailman/venv/lib64/python3.6/site-packages/sqlalchemy/pool/impl.py", line 140, in _do_get self._dec_overflow() File "/opt/mailman/venv/lib64/python3.6/site-packages/sqlalchemy/util/langhelpers.py", line 70, in __exit__ with_traceback=exc_tb, File "/opt/mailman/venv/lib64/python3.6/site-packages/sqlalchemy/util/compat.py", line 182, in raise_ raise exception File "/opt/mailman/venv/lib64/python3.6/site-packages/sqlalchemy/pool/impl.py", line 137, in _do_get return self._create_connection() File "/opt/mailman/venv/lib64/python3.6/site-packages/sqlalchemy/pool/base.py", line 309, in _create_connection return _ConnectionRecor I suspect it is not using the config file at /etc/mailman3/mailman.cfg But we do not even see a mailman service in /etc/systemd/system/mailman3.service. Also, we are using python 3.6, will that be a major issue? or should spend the time to install 3.7 from source?

3 3

Changing subscription address
by Allan Hansen March 23, 2021

March 23, 2021

All, I need help with this. A subscriber is a member of 14 of the lists on my system (others have more subscriptions). This member needs to change the address and is dyslexic, so I’ve been asked to help. I added the new address to her account in Django and set it as the preferred address. However, when she was subscribed, the system set her old address as the list subscription address, instead of her ‘preferred’ address. Well, I’m not sure of this as I cannot access her Settings, but that’s how it worked with one of my own addresses. Will I now have to tell her to do this for each list she is subscribed to: Select ‘Mailman Settings’ in dialog pulldown. Select one of the lists listed. Click on ‘Manage Subscription.’ In ‘Select Emai’, select the ‘Primary Address’ pulldown option Click on ‘Change email used for subscription.’ Please note that the “Global Mailman preferences’ nor the ‘Address-based preferences’ have the option to select the preferred address. I realize that once a member has an account in Django AND has preferred address set AND has selected the ‘Primary Address’ for each list, then this will be easier. However, I have 10000+ subscriptions by some 1500 members, most of whom were moved over from MM2 and have no Django accounts. Someone on list some time ago advised me that it was possible to do this easily globally. I have spent a couple of hours on the system trying to find that way but the above per-list procedure is all I found. Please make this easy, as I get these requests all the time and some, like this one, are on many lists. Yours, Allan

5 16

FILTER_VHOST not working
by Johannes Rohr March 23, 2021

March 23, 2021

In /etc/mailman3/mailman-web.py I have added FILTER_VHOST = True so that only the list for the current domain are shown. But this has no effect. What's more, in hyperkitty I see at the top left the lable for the default domain, even though I am visiting from another domain. The web domains are exactly the same as the mail domans (lists.[domain].[tld]) In the Nginx config I have added location / { proxy_set_header X-Forwarded-Proto $scheme; proxy_set_header X-Forwarded-Host $host; proxy_pass http://localhost:8000/; [....] } to make sure that mailman3 knows from which URL it is visited. Am I overlooking something? I am using the distribution packages on Ubuntu 20.04: mailman3 3.2.2-1 mailman3-web 0+20180916-10 I see, the mailman3-web package is quite dated. Is it recommended to install via virtualenv instead? Cheers, Johannes

2 1

Mailman Core 3.3.4 is now out
by Abhilash Raj March 22, 2021

March 22, 2021

Hey Everyone, I am pleased to announce that Mailman Core 3.3.4 is now out. Because of incompatibility with the new version of a downstream library (SQLAlchemy), this release add is setting 1.3.x as the max supported version of SQLAlchemy. Even though it comes soon after 3.3.3, it has a lot of bug fixes and new features. Some notable ones are: * Email -join command now supports subscribing as digests with digest=<no|mime|plain> options being honored. * For anonymous lists, Mailman will filter all the headers except a few that can be configured using a new config option. * Mailman can do max_size checks on filtered message rather than original message (which might be larger before being filtered) * Previously deprecated --add, --del and --sync options from `mailman members` command are now removed. Their alternatives are `addmembers`, `delmembers` and `syncmembers` subcommands. * If configured, Mailman will add a report about content filtering. A complete change log is available here: https://docs.mailman3.org/projects/mailman/en/latest/src/mailman/docs/NEWS.… This release is available via PyPI: https://pypi.org/project/mailman/3.3.4/ You can install or upgrade using: ``` $ pip install --upgrade mailman ``` Thanks to all the contributors who helped with this release! -- On behalf of Mailman Core Team Abhilash Raj

1 0

Disable user registration
by Torge Riedel March 21, 2021

March 21, 2021

Hi list, how can I disable user registration? There are only two users, me - the admin - and an additional owner/moderator. The list setup we use is completely managed by the owner/moderator (about 100 mail adresses per list). Thanks Torge

6 13

Problem with languages
by Jens Günther March 20, 2021

March 20, 2021

Hey, I set up Mailman3 from the Debian-packages and got it working. But for some reason I do have a mixed setup in languages now. Some strings are in English, some are in German. The settings I changed are: in mailman.cfg [mailman] default_language: de in mailman-web.py LANGUAGE_CODE = 'de-DE' TIME_ZONE = 'Europe/Berlin' Nothing changed after restarting services. I then came across this post: https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… -> but actually I do not find any of the files, ... - no mailman.po / .mo - no generate_mo.sh - no languages folders in /usr/lib/python3/dist-packages/mailman/messages - when searching with locate (after updatedb) no LC_MESSAGES/mailman or anything stated in the post Actually it would be fantastic to be able to choose language for the web interface / lists like on this here, but this is additional :-) just to have it in one language, this time German would be cool. I also would translate, but it seems finished: https://hosted.weblate.org/projects/gnu-mailman/mailman/ Thank you for help, regards, Jens.

4 7

only show mail domains from web host on web-host-url
by jens.guenther＠posteo.de March 19, 2021

March 19, 2021

Is it possible, to only show publicly (if advertised) these lists on a certain url, that are corresponding to the web host the url I accessed mailman through? I tried to configure different Web hosts with different Mail domains ... but through all the domains all mailing lists are advertised and I don't get why I then should configure different web hosts :-) Another solution for me would be, that I have only 1 Web host, don't advertise any Mailing-lists (or only certain ones) and configure different administrators for certain mail domains. But also that I don't see how it should be done :-( Sorry for the maybe nooby/newby question, but I just started trying Mailman3 and hoped for a better support for multidomain (which I till right now like in contrast to mailman2, whih has been a hazzle to register new Domains on the same server, but worked :-)). Thanks inadvance.

4 8

Good MM hosts for customized code?
by Steven Clift March 19, 2021

March 19, 2021

E-Democracy.org is plotting a test move from GroupServer.org (end of life coming) to MM3. We have certain technologies we've embedded into GroupServer, like volume based posting limits on our political forums (no more than X posts in y hours per member ... typically 2 or 3 posts in 24 hours), inserting standard "who made this post" in the email footer with links to the user profile for context assuming email is forwarded as well as the web archive url to that post. We know that we do not want to be in charge of email deliverability and we don't yet have an Mailman aficionado in our volunteer team. So ideally, we'd find the right Mailman host where we can use our own selected domain (@opengroups.org perhaps) and whether we hire coders to help out with custom tech OR have volunteer coders (interested in local online communities? AKA hate that Facebook and NextDoor host most of these, let me know :-) ), we'd like to have the right set up to allow us to experiment. Advice? Thoughts? Thanks, Steve Steven Clift <http://stevenclift.com> - Founder and Volunteer, E-Democracy.org clift(a)e-democracy.org - +1 612 234 7072 @Democracy <http://twitter.com/democracy> - Facebook <https://www.facebook.com/stevenlclift> - LinkedIn <http://linkedin.com/in/netclift>

2 1

CC header
by Brian Carpenter March 19, 2021

March 19, 2021

Can the 'cc' header be used for setting up a header filter via Postorius? -- Brian Carpenter Harmonylists.com Emwd.com

2 2

Delayed password requests & migrating users from mm2
by Duane Raymond March 17, 2021

March 17, 2021

Hi again, With my new mm3 instance, password reset email to members are being received many hours late or not at all. They seem to be sent fine and when I trigger one to one of my addresses, it works instantly. But many users report getting it many hours later or not at all (despite looking in spam and bulk folders). Anyone else experience this password reset mail delay/vanishing and/or have any suggestions for diagnosing it and resolving it? The main reason this is problematic is that in migrating lists from mm2, I've set a 'fake' password for them in the mm3 db and instructed members to reset their password to set a new one so they can access the list and update their subscription and/or subscribe to other lists (which they can also do without an account of course - but then lose the ability to use the web interface and access archives). So if, as an alternative, there is another way to get list members to access their account then I'm open to it. Cheers, Duane

2 1

Specifying hold reason: non-member, header filter number/regex
by Duane Raymond March 16, 2021

March 16, 2021

Hi, Unlike in mm2, I'm finding in mm3 that is not obvious when non-member is trying to post to the list when their subject line also has a header-filter match. All it lists is that the posting has matched a header rule (which isn't quite accurate as it is a non-member) and even when it matches a header rule it doesn't say which one (which is a noted issues in the file mailman/chains/headers.py). Anyone else noticed the same and have a solution? The relevant list setting is:: Message Acceptance > Default action to take when a non-member posts to the list: Hold for moderation Should I be editing mailman/chains/headers.py or perhaps another python file in that firstory to make the hold reason more explicit? It is actually two problems I wish to solve: 1. Show when the message is held because it is a posting by a non-member (or a moderated member, etc) 2. Show what specific header filter has caused the message to be held so I know why and/or can debug the regex to be more/less specific. Cheers, Duane

2 2

Contributing to Mailman documentation
by Abhilash Raj March 16, 2021

March 16, 2021

Hey Everyone, I have been trying to document how to propose changes to the Mailman documentation, which is hosted on ReadTheDocs. Right now, I think i have the complete flow in Gitlab documented in this page[1] and how to reach Gitlab from any page in documentation. I am sure there could be some parts that aren’t completely obvious to others. If you think I have missed a few steps or if there are issues in the doc, please feel free to reply on this thread or just open issues directly in Gitlab project[2] for documentation at docs.mailman3.org. [1]: https://docs.mailman3.org/en/latest/documentation.html [2]: https://gitlab.com/mailman/mailman-suite-doc/-/issues Hope this is helpful! -- thanks, Abhilash Raj (maxking)

2 1

problem with postorius initial setup
by John Covici March 16, 2021

March 16, 2021

Hi. I am trying to setup postorius, but I have run into a problem. I am using the example project, except I am using postgresql instead of sqlite3. I ran python manage.py migrate which was successful. On running the development server I get: Exception in thread django-main-thread: Traceback (most recent call last): File "/usr/lib/python3.8/site-packages/django/utils/module_loading.py", line 20, in import_string return getattr(module, class_name) AttributeError: module 'postorius.middleware' has no attribute 'APICountingMiddleware' The above exception was the direct cause of the following exception: Traceback (most recent call last): File "/usr/lib/python3.8/site-packages/django/core/servers/basehttp.py", line 45, in get_internal_wsgi_application return import_string(app_path) File "/usr/lib/python3.8/site-packages/django/utils/module_loading.py", line 17, in import_string module = import_module(module_path) File "/usr/lib/python3.8/importlib/__init__.py", line 127, in import_module return _bootstrap._gcd_import(name[level:], package, level) File "<frozen importlib._bootstrap>", line 1014, in _gcd_import File "<frozen importlib._bootstrap>", line 991, in _find_and_load File "<frozen importlib._bootstrap>", line 975, in _find_and_load_unlocked File "<frozen importlib._bootstrap>", line 671, in _load_unlocked File "<frozen importlib._bootstrap_external>", line 783, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/covici/mailman_django/example_project/wsgi.py", line 17, in <module> application = get_wsgi_application() File "/usr/lib/python3.8/site-packages/django/core/wsgi.py", line 13, in get_wsgi_application return WSGIHandler() File "/usr/lib/python3.8/site-packages/django/core/handlers/wsgi.py", line 127, in __init__ self.load_middleware() File "/usr/lib/python3.8/site-packages/django/core/handlers/base.py", line 40, in load_middleware middleware = import_string(middleware_path) File "/usr/lib/python3.8/site-packages/django/utils/module_loading.py", line 22, in import_string raise ImportError('Module "%s" does not define a "%s" attribute/class' % ( ImportError: Module "postorius.middleware" does not define a "APICountingMiddleware" attribute/class The above exception was the direct cause of the following exception: Traceback (most recent call last): File "/usr/lib/python3.8/threading.py", line 932, in _bootstrap_inner self.run() File "/usr/lib/python3.8/threading.py", line 870, in run self._target(*self._args, **self._kwargs) File "/usr/lib/python3.8/site-packages/django/utils/autoreload.py", line 53, in wrapper fn(*args, **kwargs) File "/usr/lib/python3.8/site-packages/django/core/management/commands/runserver.py", line 138, in inner_run handler = self.get_handler(*args, **options) File "/usr/lib/python3.8/site-packages/django/contrib/staticfiles/management/commands/runserver.py", line 27, in get_handler handler = super().get_handler(*args, **options) File "/usr/lib/python3.8/site-packages/django/core/management/commands/runserver.py", line 65, in get_handler return get_internal_wsgi_application() File "/usr/lib/python3.8/site-packages/django/core/servers/basehttp.py", line 47, in get_internal_wsgi_application raise ImproperlyConfigured( django.core.exceptions.ImproperlyConfigured: WSGI application 'wsgi.application' could not be loaded; Error importing module. Thanks in advance for any suggestions. -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una covici(a)ccs.covici.com

3 4

GNU Mailman has been accepted in Summer of Code!
by Stephen J. Turnbull March 16, 2021

March 16, 2021

Just to let everyone know. [Cc'd to Mailman 3 Users, but please direct followups to the Mailman Developers list only!] GSoC "who we are" page is here: https://summerofcode.withgoogle.com/organizations/4903353420611584/ Ideas page is here: https://wiki.list.org/DEV/Google%20Summer%20of%20Code%202021 Student applications open on March 30, and continue until April 13 18:00 UTC. Comments, ideas, etc welcome on Mailman Developers (preferred) or directly to me or Abhilash. Please do NOT edit the ideas page on the wiki without discussing with me, Abhilash, or Mark, as Google has strict rules about what ideas are relevant to their program. If you have been active in GSoC and do understand the rules, the discussion will be "pro forma", but at least we do want to know what we might be asked about as potential mentors. We can add more mentors, definitely, you're welcome. If you can reliably spend about 5 hours per week on it for the summer, we'll sign you up as a regular mentor. If you'd like to interact regularly with students, but can't promise 5 hours a week, we can negotiate a semi-formal status (but you won't get the privileges of a full mentor, like the T-shirt). Otherwise, we'll try to keep discussions on the list, everybody welcome. Regards, Steve

1 0

Re: statistics monitoring for Mailman3
by Mark Sapiro March 15, 2021

March 15, 2021

On 3/12/21 11:22 AM, Mohsen Masoudfar wrote: > I was checking on log rotating on smtp.log. On my server it does not rotate. I could use log-rotator to rotate that, but could not find any information how to inform the mailman process of the rotation, e.g. which signal to send him? The `mailman reopen` command is the recommended way, or you can send the `master` a SIGUSR1. The master's PID is in the file var/master.pid or /var/run/mailman/master.pid if you've configured `layout: fhs`. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 5

statistics monitoring for Mailman3
by Mohsen Masoudfar March 15, 2021

March 15, 2021

Hi, I am wondering if there is a monitoring application available for Mailman3 to display statistics about the number of emails send for each maillist. Thanks Mohsen

4 6

Five Year Old Issue
by Brian Carpenter March 15, 2021

March 15, 2021

Any chance to get this implemented in time for the next Mailman 3 core release? https://gitlab.com/mailman/mailman/-/issues/19 It's been 5 years. -- Brian Carpenter Harmonylists.com Emwd.com

2 7

hooking up mailman and sendmail
by John Covici March 14, 2021

March 14, 2021

Hi. So, I have sendmail as my mta and I want mailman to use it. So far, I have a local delivery agent able to send on port 8024. So, what do I have to tell mailman to use sendmail and listen on port 8024 and to send on port 25? Thanks in advance for any suggestions. -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una covici(a)ccs.covici.com

3 6

problems installing mailman3 under gentoo and upgrading mailman2 to mailman3
by John Covici March 14, 2021

March 14, 2021

Hi. I am having a great deal of difficulty installing mailman3 using gentoo and sendmail. Also, I want to upgrade my old mailman2 data to mailman3. What I have done so far is to install the mailman3 packages from my repository and got this: django-mailman3 version 1.3.4, mailmanclient version 3.3.1, mailman version 3.3.2 (apparently the core), postorius version 1.3.3 and hyperkitty version 1.3.3. I also have mariadb and postgresql already installed. Now trying to read your documentation, it seems it wants me to reinstall some packages using pip in the home directory of the mailman user in a python virtual environment, that was the first thing. But I would like to avoid multiple package managers wherever possible -- gentoo is already a lot of maintainance without dealing with pip's maintainance. The binaries also seem to be different from my gentoo packages. So, how do I proceed with getting mailman3 up and working, configuring the database, configs, etc and I guess after doing that upgrading mailman2 and getting sendmail to interface properly with mailman3? Thanks in advance for any suggestions. -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una covici(a)ccs.covici.com

5 14

hyperkitty.views.mailman Could not archive the email with message-id '<snip>': A string literal cannot contain NUL (0x00) characters
by Gilles Filippini March 13, 2021

March 13, 2021

Hi, I have this error message repeating endlessly into the mailman-web logs. The related list is an open one on which we receive spam sometimes. I understand these emails can me malformed and cause this error. How to deal with them? They can't stay forever at the hyperkitty door. Thanks in advance, _g.

2 6

Attachments in digests mails
by Eric Broens March 12, 2021

March 12, 2021

Hi, subscribers that prefer to receive digests, are receiving attachments as encoded characters in the message body. This makes digests almost unreadable, see an extract of an example below. Is there a way to make sure the attachments are send as attachments in the digest mails? Message: 2 Date: Thu, 11 Mar 2021 23:09:29 +0100 From: *********** <*********(a)**********.**> Subject: [Planoccult] (2589) Daniel and 3 others - negative To: Planoccult <*********@******** <mailto:*********@ls.vvs.be> > Message-ID: <wcieubkwujbuvtoyrqhg@kqqa> Content-Type: multipart/mixed; boundary="=-bcRfVuQTUIVzQDmITHPG" --=-bcRfVuQTUIVzQDmITHPG Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Dear all, please find attached negative reports of 4 recent observations, including (= 2589) Daniel. I could not afford to skip such important asteroid to me (-; = despite very low probability of positive result. Best regards, --=-bcRfVuQTUIVzQDmITHPG Content-Type: image/png; name=2021_03_09_Blazewicz_2589_Daniel.png Content-Id: <cfaaa58faf30919364d7dcee7cb4cc20221c8dc4> Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename=2021_03_09_Blazewicz_2589_Daniel.png iVBORw0KGgoAAAANSUhEUgAAAsAAAAGtCAYAAAAYrcL2AAAACXBIWXMAAA7EAAAOxAGVKw4bAAAg AElEQVR4nOzd6XcUR54v/C+SEEJIgDAgCbAQICFAIPbFdntvu9sX6HbbfoZn+tyZ7vu84N/o239G M/fcOefOnJnmtunpBbXtdhuvDRgwuwCxiR2BhHYJbaV6XuAqqopcIjMjMiMyv59zfIwqqzIjMyMi fxkZETntw9/+Jg0iIiIiooQoijoBRERERERhYgBMRERERIlSEnUCZDp/6T5ee+01X7/94osvsHZV Thanks, Eric

2 1

Posterious membership listing for non-owner/moderators?
by Duane Raymond March 11, 2021

March 11, 2021

Hi, I'm configuring my new mailman3 lists and one option I wish to use is a membership listing (which list members can opt-in/out of via their preferences). The only problem is, via the web interface (Posterious / Hyperkitty) I can't find that listing when logged in as an ordinary member. Am I missing something or is this not built in yet? I have my test list setting under List Identity -> Members List Visibility set to "Only mailinglist members", but all I can find in terms of members is the side-listing of posters to the list/thread. (as usual before asking the question I explored a lot and searched the archives/documentation). Cheers, Duane

2 2

Setting for archiving multi email domains?
by Duane Raymond March 11, 2021

March 11, 2021

Hi again, I have a Debian-postfix-postgres-nginx-Hyperkitty-Postorius setup with a primary domain (e.g. primarydomain.com) and several 'secondary' domains used for email lists (e.g. emaillistA.com and emaillistB.com) When sending emails to a list using the primarydomain.com address, the email is received, sent to subscribers and archived properly. But when it is sent to one of the secondary domains like tes(a)emaillistA.com - the email doesn't seem to be sent and isn't archived - despite it being set to be. What I've tried so far (after searching these archives and looking at the documentation) is to: 1) Adding emaillistA.com and emaillistB.com to the MAILMAN_ARCHIVER_FROM setting in the settings_local.py file (and then restart mailman) 2) Adding emaillistA.com and emaillistB.com to the mydestination setting in the postfix main.cf file (and the restarting postfix). ...I even tried adding to /etc/hosts 127.0.0.1 emaillistA.com and 127.0.0.1 emaillistB.com but removed it as it didn't seem appropriate there. Does anyone have any hits of what else I need to configure to get it working for these 'secondary' email domains? Cheers, Duane

4 24

Backups & disaster recovery of mailman3
by David Partain March 8, 2021

March 8, 2021

Hi, So now I have a running mailman3 installation. Whew... Is there documentation of things like thorough backups and disaster recovery? I haven't yet found it. Backups: Obviously, I understand that I need to have datbase (mysql, in my case) dumps, and I'll have file system backups onto something that our IT folks will backup. Is there more I should think of? Disaster recovery: So, let's say my server (which is cloud-y) gets trashed and I need to get mailman back on a new server. Is this process described somewhere? My kind thanks to you all for listening :) Cheers, David

2 1

Email Commands
by Brian Carpenter March 7, 2021

March 7, 2021

Is there a list of email commands on a website somewhere that you can use with Mailman 3? -- Brian Carpenter Harmonylists.com Emwd.com

2 1

Importing issue from mailman2 to mailman3
by David Partain March 7, 2021

March 7, 2021

Hi, I'm in the process of moving 1400-ish lists from a very old mailman2 installation to an installation on Ubuntu 18.04 with the version of mailman3 packaged for that distro. (Yes, that was a mistake, but I'm committed at this point.) I'm doing this import as per: sudo -u list mailman import21 somelist@one-of-the-domains<mailto:somelist@one-of-the-domains> /tmp/lists/somelist/config.pck where /tmp/lists includes all of the list configs from the old installation. Most of it's going fine, as best I can see. However, I get exceptions on some lists that look like this: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/sqlalchemy/engine/base.py", line 1182, in _execute_context context) File "/usr/lib/python3/dist-packages/sqlalchemy/engine/default.py", line 470, in do_execute cursor.execute(statement, parameters) File "/usr/local/lib/python3.6/dist-packages/pymysql/cursors.py", line 163, in execute result = self._query(query) File "/usr/local/lib/python3.6/dist-packages/pymysql/cursors.py", line 321, in _query conn.query(q) File "/usr/local/lib/python3.6/dist-packages/pymysql/connections.py", line 505, in query self._affected_rows = self._read_query_result(unbuffered=unbuffered) File "/usr/local/lib/python3.6/dist-packages/pymysql/connections.py", line 724, in _read_query_result result.read() File "/usr/local/lib/python3.6/dist-packages/pymysql/connections.py", line 1069, in read first_packet = self.connection._read_packet() File "/usr/local/lib/python3.6/dist-packages/pymysql/connections.py", line 676, in _read_packet packet.raise_for_error() File "/usr/local/lib/python3.6/dist-packages/pymysql/protocol.py", line 223, in raise_for_error err.raise_mysql_exception(self._data) File "/usr/local/lib/python3.6/dist-packages/pymysql/err.py", line 107, in raise_mysql_exception raise errorclass(errno, errval) pymysql.err.DataError: (1406, "Data too long for column 'info' at row 1") My assumption is that what's in the "Info" field on the old mailman2 config is simply too long. Is that correct? In that case, I suppose the right thing is to (1) edit each one, reducing the size, which'll create a new config.pck, (2) pull it over to the new machine, and (3) run the import again. Seem reasonable? Cheers, David

2 2

[Django] ERROR (EXTERNAL IP): Service Unavailable
by dancab＠caltech.edu March 5, 2021

March 5, 2021

I've imported a list from Mailman2 and had the owner send a message for testing purposes. His message are moderated per the list configuration. The message is delivered to Mailman3 and shows that it's being held. However if we attempt to view the message in Postorius web UI then an error is thrown. In the web interface the error is simply "Mailman REST API not available. Please start Mailman core." But Mailman Core is running and we can do other functions just fine. Our superuser account receives a much more detailed message with the subject below. [Django] ERROR (EXTERNAL IP): Service Unavailable: /postorius/lists/cpa-announcement.caltech.edu/held_messages Does "Service Unavailable" mean I'm missing something in the configuration? Thanks for your help. ---- Dan Caballero

3 16

postfix malformed address with confirm replies
by Stephen Willey Mats Mats March 4, 2021

March 4, 2021

I’m getting bounces back from postfix (553 5.1.3 Error: malformed address) for my confirm replies. I found a similar issue in this lists’ archives back in 2017 but that issue was supposedly fixed in version 3.2 I’m running the current docker containers. I’m pretty sure I have all of the mailman settings in postix: " # Support the default VERP delimiter. recipient_delimiter = + unknown_local_recipient_reject_code = 550 owner_request_special = no transport_maps = regexp:/opt/mailman/core/var/data/postfix_lmtp local_recipient_maps = regexp:/opt/mailman/core/var/data/postfix_lmtp relay_domains = regexp:/opt/mailman/core/var/data/postfix_domains " the entries in /opt/mailman/core/var/data/postfix_lmtp look like they should match /^matsmats-mm3-test1(a)mm3\.aca-aws\.s\.uw\.edu$/ lmtp:[172.19.199.2]:8024 /^matsmats-mm3-test1-bounces(\+.*)?(a)mm3\.aca-aws\.s\.uw\.edu$/ lmtp:[172.19.199.2]:8024 /^matsmats-mm3-test1-confirm(\+.*)?(a)mm3\.aca-aws\.s\.uw\.edu$/ lmtp:[172.19.199.2]:8024 /^matsmats-mm3-test1-join(a)mm3\.aca-aws\.s\.uw\.edu$/ lmtp:[172.19.199.2]:8024 /^matsmats-mm3-test1-leave(a)mm3\.aca-aws\.s\.uw\.edu$/ lmtp:[172.19.199.2]:8024 /^matsmats-mm3-test1-owner(a)mm3\.aca-aws\.s\.uw\.edu$/ lmtp:[172.19.199.2]:8024 /^matsmats-mm3-test1-request(a)mm3\.aca-aws\.s\.uw\.edu$/ lmtp:[172.19.199.2]:8024 /^matsmats-mm3-test1-subscribe(a)mm3\.aca-aws\.s\.uw\.edu$/ lmtp:[172.19.199.2]:8024 /^matsmats-mm3-test1-unsubscribe(a)mm3\.aca-aws\.s\.uw\.edu$/ lmtp:[172.19.199.2]:8024 thanks, steve > On Feb 26, 2021, at 14:08:54 PST, Mail Delivery System <MAILER-DAEMON(a)ip-172-31-18-222.us-west-2.compute.internal> wrote: > > This is the mail system at host ip-172-31-18-222.us-west-2.compute.internal. > > I'm sorry to have to inform you that your message could not > be delivered to one or more recipients. It's attached below. > > For further assistance, please send mail to postmaster. > > If you do so, please include this problem report. You can > delete your own text from the attached returned message. > > The mail system > > <matsmats-mm3-test1-confirm+d6f77a2572ef55a8b2c4ca0d77de8493fbb55856(a)mm3.aca-aws.s.uw.edu>: > host 172.19.199.2[172.19.199.2] said: 553 5.1.3 Error: malformed address > (in reply to RCPT TO command) > Reporting-MTA: dns; ip-172-31-18-222.us-west-2.compute.internal > X-Postfix-Queue-ID: E144B8BC3C5 > X-Postfix-Sender: rfc822; stephen.s.w.matsmats(a)gmail.com > Arrival-Date: Fri, 26 Feb 2021 14:08:54 -0800 (PST) > > Final-Recipient: rfc822; matsmats-mm3-test1-confirm+d6f77a2572ef55a8b2c4ca0d77de8493fbb55856(a)mm3.aca-aws.s.uw.edu > Original-Recipient: rfc822;matsmats-mm3-test1-confirm+d6f77a2572ef55a8b2c4ca0d77de8493fbb55856(a)mm3.aca-aws.s.uw.edu > Action: failed > Status: 5.1.3 > Remote-MTA: dns; 172.19.199.2 > Diagnostic-Code: smtp; 553 5.1.3 Error: malformed address > > From: Steve Mats Mats <willey(a)selby.com> > Subject: Re: Your confirmation is needed to join the matsmats-mm3-test1(a)mm3.aca-aws.s.uw.edu mailing list. > Date: February 26, 2021 at 2:08:52 PM PST > To: matsmats-mm3-test1-confirm+d6f77a2572ef55a8b2c4ca0d77de8493fbb55856(a)mm3.aca-aws.s.uw.edu > > > > >> On Feb 26, 2021, at 11:41:54 PST, matsmats-mm3-test1-confirm+d6f77a2572ef55a8b2c4ca0d77de8493fbb55856(a)mm3.aca-aws.s.uw.edu wrote: >> >> Email Address Registration Confirmation >> >> Hello, this is the GNU Mailman server at mm3.aca-aws.s.uw.edu. >> >> We have received a registration request for the email address >> >> willey(a)teamd.org >> >> Before you can start using GNU Mailman at this site, you must first confirm >> that this is your email address. You can do this by replying to this message. >> >> Or you should include the following line -- and only the following >> line -- in a message to matsmats-mm3-test1-request(a)mm3.aca-aws.s.uw.edu: >> >> confirm d6f77a2572ef55a8b2c4ca0d77de8493fbb55856 >> >> Note that simply sending a `reply' to this message should work from >> most mail readers. >> >> If you do not wish to register this email address, simply disregard this >> message. If you think you are being maliciously subscribed to the list, or >> have any other questions, you may contact >> >> matsmats-mm3-test1-owner(a)mm3.aca-aws.s.uw.edu > > >

4 9

Set Postorius interface locale
by Duane Raymond March 4, 2021

March 4, 2021

Hi everyone, Thanks to Brian I'm up and running with my migrated mailman3 lists and am now starting to get into customising the interface (styling and content). I've been trying to figure out how to set/change the Postorius locale - I specifically want to change some text strings on the info page without breaking the i18n mechanisms. I've worked with po and mo files before, so changing and compiling them isn't a problem. The problems I've encountered so far are: 1) Where do I set the local of the Postorius interface? 2) Individual lists have a language setting, but it doesn't seem to reflect what the Postorius locales are as the only english option is "English (USA)" and none of the other English speaking locales and on the file system there is no en-us PO files....so I suspect I'm looking in the wrong place. Am I looking at this all wrong? The documentation doesn't seem to have any info about this and yet the mechanisms seem to be there. Once I learn more I'm quite keen to start working on improving the documentation based on what I learn. Cheers, Duane

3 4

Moderation emails
by peter＠chubb.wattle.id.au March 4, 2021

March 4, 2021

Hi Folks, Whenever a non-member posts to a members-only list, the owners (because I haven't set any moderators) get a 3-part MIME message, from the xxx-owner email address. The first part is the template from .../mailman/templates/en/list:admin:action:post.txt The second part is a message/rfc822 copy of the held message. The third part is another message/rfc822 part that says, If you reply to this message, keeping the Subject: header intact, Mailman will discard the held message. Do this if the message is spam. If you reply to this message and include an Approved: header with the list password in it, the message will be approved for posting to the list. The Approved: header can also appear in the first line of the body of the reply. This is really confusing, as replying to the whole message will go to the '-owner' not the '-request' address, which will neither discard nor authorise the message, and will not contain the subject: heading from the encapsulated message. Is there any easy way, either to turn off generation of the third message, or make it so that acting on the message (hitting reply in your email client) will actually discard the message? Peter C

2 1

postorius / adjusted settings menu
by Andreas Barth March 3, 2021

March 3, 2021

Hi together, I want to adjust the settings menu to reduce to the options really needed. The easiest way would be to edit src/postorius/views/list* but I don't think that's a good idea. So what comes to my mind is to have some variable in the configuration that contains the menu items and - if set - the submenus. E.g. the following: { 'list_identity': ['!gateway_to_mail', '!gateway_to_news', '!linked_newsgroup', '!newsgroup_moderation', '!nntp_prefix_subject_too' ], 'automatic_responses', 'alter_messages', 'dmarc_mitigations', 'digest', 'message_acceptance', 'archiving', 'subscription_policy', 'bounce_processing' } would express: default menu and just remove the mentioned items. Of course, something like ['advertised', 'description', 'info', 'display_name', 'subject_prefix'] would work as well. Resorting should also be possible, so something like { 'list_identity': ['advertised', 'description', 'info', 'personalize'] } would give a very small list of items to select from. What do you think about the idea? Andi

2 1

Shunt Error Mail?
by Pete Ashdown March 3, 2021

March 3, 2021

I have a number of list managers with subscribers who are confused as to why their messages are silently disappearing. I've read the archives on how to decipher why a message was shunted, but this is not workable at scale. Is sending an error email back to the sender a consideration?

3 3

Domain ownership issues
by peter＠chubb.wattle.id.au March 2, 2021

March 2, 2021

Hi, I wanted to give another user the ability to create lists, so added that user as 'owner' of the domain. But he does not see the 'create list' button. I decided to try deleting him as owner, and the result is a python exception: KeyError: 'file' ERROR 2021-03-01 20:35:07,195 550 django.request Internal Server Error: /postori us/domains/sel4.systems/owners/b55d58c434c94f6dbd19ae338502dd2e/remove Traceback (most recent call last): File "/usr/lib/python3/dist-packages/django/core/handlers/exception.py", line 34, in inner response = get_response(request) File "/usr/lib/python3/dist-packages/django/core/handlers/base.py", line 115, in _get_response response = self.process_exception_by_middleware(e, request) File "/usr/lib/python3/dist-packages/django/core/handlers/base.py", line 113, in _get_response response = wrapped_callback(request, *callback_args, **callback_kwargs) File "/usr/lib/python3/dist-packages/django/views/decorators/http.py", line 40 , in inner return func(request, *args, **kwargs) File "/usr/lib/python3/dist-packages/django/contrib/auth/decorators.py", line 21, in _wrapped_view return view_func(request, *args, **kwargs) File "/usr/lib/python3/dist-packages/postorius/auth/decorators.py", line 75, i n wrapper return fn(*args, **kwargs) File "/usr/lib/python3/dist-packages/postorius/views/domain.py", line 182, in remove_owners remove_email = client.get_user(user_id).addresses[0].email File "/usr/lib/python3/dist-packages/mailmanclient/client.py", line 324, in get_user display_name=display_name)) File "/usr/lib/python3/dist-packages/mailmanclient/restbase/connection.py", line 111, in call raise HTTPError(url, response.status_code, urllib.error.HTTPError: HTTP Error 404: 404 Not Found Mailman Core Version GNU Mailman 3.2.2 (La Villa Strangiato) Mailman Core API Version 3.0 Mailman Core Python Version 3.9.0+ (default, Oct 19 2020, 09:51:18) [GCC 10.2.0] Peter C

2 4

Hyperkitty "All Threads" results in error
by Mark Dadgar March 2, 2021

March 2, 2021

So I have been wrestling with this problem for a while now. Most times, but not every time, when someone clicks on the All Threads link in hyperkitty, a 500 error is generated. I googled it, obviously, and at first I thought it was related to this issue, but that has not proven to be the case: https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… <https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/…> I’ve attached a “backtrace” below. The archives were imported from a previous mm3 install a couple of months ago. The problem occurs even with a list state full of immediately recent posts. Anyone have thoughts on how I can fix this? - Mark ----- mark(a)pdc-racing.net | 408-348-2878 — Internal Server Error: /archives/list/trackjunkies(a)pdc-racing.net <mailto:archives/list/trackjunkies@pdc-racing.net>/latest VariableDoesNotExist at /archives/list/trackjunkies(a)pdc-racing.net <mailto:archives/list/trackjunkies@pdc-racing.net>/latest Failed lookup for key [sender] in None Request Method: GET Request URL: https://mail.pdc-racing.net/archives/list/trackjunkies@pdc-racing.net/latest <https://mail.pdc-racing.net/archives/list/trackjunkies@pdc-racing.net/latest> Django Version: 2.2.14 Python Executable: /opt/mailman/mm/venv/bin/python Python Version: 3.8.2 Python Path: ['/opt/mailman/mm', '/opt/mailman/mm/', '/opt/mailman/mm/bin', '/usr/lib/python38.zip', '/usr/lib/python3.8', '/usr/lib/python3.8/lib-dynload', '/opt/mailman/mm/venv/lib/python3.8/site-packages'] Server time: Sun, 4 Oct 2020 10:27:10 -0700 Installed Applications: ('hyperkitty', 'postorius', 'django_mailman3', 'django.contrib.admin', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.staticfiles', 'rest_framework', 'django_gravatar', 'compressor', 'haystack', 'django_extensions', 'django_q', 'allauth', 'allauth.account', 'allauth.socialaccount') Installed Middleware: ('django.contrib.sessions.middleware.SessionMiddleware', 'django.middleware.common.CommonMiddleware', 'django.middleware.csrf.CsrfViewMiddleware', 'django.middleware.locale.LocaleMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', 'django.contrib.messages.middleware.MessageMiddleware', 'django.middleware.clickjacking.XFrameOptionsMiddleware', 'django.middleware.security.SecurityMiddleware', 'django_mailman3.middleware.TimezoneMiddleware', 'postorius.middleware.PostoriusMiddleware') Traceback: File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in _resolve_lookup 829. current = current[bit] During handling of the above exception ('NoneType' object is not subscriptable), another exception occurred: File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in _resolve_lookup 837. current = getattr(current, bit) During handling of the above exception ('NoneType' object has no attribute 'sender'), another exception occurred: File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in _resolve_lookup 843. current = current[int(bit)] During handling of the above exception (invalid literal for int() with base 10: 'sender'), another exception occurred: File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/core/handlers/exception.py" in inner 34. response = get_response(request) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/core/handlers/base.py" in _get_response 115. response = self.process_exception_by_middleware(e, request) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/core/handlers/base.py" in _get_response 113. response = wrapped_callback(request, *callback_args, **callback_kwargs) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/hyperkitty/lib/view_helpers.py" in inner 134. return func(request, *args, **kwargs) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/hyperkitty/views/mlist.py" in archives 114. return _thread_list(request, mlist, threads, extra_context=extra_context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/hyperkitty/views/mlist.py" in _thread_list 143. return render(request, template_name, context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/shortcuts.py" in render 36. content = loader.render_to_string(template_name, context, request, using=using) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/loader.py" in render_to_string 62. return template.render(context, request) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/backends/django.py" in render 61. return self.template.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render 171. return self._render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in _render 163. return self.nodelist.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render 937. bit = node.render_annotated(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render_annotated 904. return self.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/loader_tags.py" in render 150. return compiled_parent._render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in _render 163. return self.nodelist.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render 937. bit = node.render_annotated(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render_annotated 904. return self.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/loader_tags.py" in render 62. result = block.nodelist.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render 937. bit = node.render_annotated(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render_annotated 904. return self.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/defaulttags.py" in render 209. nodelist.append(node.render_annotated(context)) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render_annotated 904. return self.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/loader_tags.py" in render 188. return template.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render 173. return self._render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in _render 163. return self.nodelist.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render 937. bit = node.render_annotated(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render_annotated 904. return self.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/defaulttags.py" in render 513. return self.nodelist.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render 937. bit = node.render_annotated(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render_annotated 904. return self.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/templatetags/i18n.py" in render 132. context.update({var: val.resolve(context) for var, val in self.extra_context.items()}) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/templatetags/i18n.py" in <dictcomp> 132. context.update({var: val.resolve(context) for var, val in self.extra_context.items()}) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in resolve 692. arg_vals.append(arg.resolve(context)) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in resolve 796. value = self._resolve_lookup(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in _resolve_lookup 848. raise VariableDoesNotExist("Failed lookup for key " Exception Type: VariableDoesNotExist at /archives/list/trackjunkies(a)pdc-racing.net <mailto:archives/list/trackjunkies@pdc-racing.net>/latest Exception Value: Failed lookup for key [sender] in None

2 4

[Django] ERROR (EXTERNAL IP): Internal Server Error: /hyperkitty/list/direttivo@catania.linux.it/top-threads
by blackout69 March 1, 2021

March 1, 2021

Hello everybody,I received this error message and from that moment the maiilan3 has stopped working.I restarted the following services mailman3 and mailman3-web and everything started working fine.Can you tell me what is the problem my django server has encountered? Internal Server Error: /hyperkitty/list/direttivo(a)catania.linux.it/top-threads DoesNotExist at /hyperkitty/list/direttivo(a)catania.linux.it/top-threads Thread matching query does not exist. Request Method: GET Request URL: https://lists.catania.linux.it/hyperkitty/list/direttivo@catania.linux.it/t… Django Version: 1.11.29 Python Executable: /usr/bin/uwsgi-core Python Version: 3.7.3 Python Path: ['.', '', '/usr/lib/python37.zip', '/usr/lib/python3.7', '/usr/lib/python3.7/lib-dynload', '/usr/local/lib/python3.7/dist-packages', '/usr/lib/python3/dist-packages'] Server time: Ven, 26 Feb 2021 20:10:53 +0100 Installed Applications: ('hyperkitty', 'postorius', 'django_mailman3', 'django.contrib.admin', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.staticfiles', 'rest_framework', 'django_gravatar', 'compressor', 'haystack', 'django_extensions', 'django_q', 'allauth', 'allauth.account', 'allauth.socialaccount') Installed Middleware: ('django.contrib.sessions.middleware.SessionMiddleware', 'django.middleware.common.CommonMiddleware', 'django.middleware.csrf.CsrfViewMiddleware', 'django.middleware.locale.LocaleMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', 'django.contrib.messages.middleware.MessageMiddleware', 'django.middleware.clickjacking.XFrameOptionsMiddleware', 'django.middleware.security.SecurityMiddleware', 'django_mailman3.middleware.TimezoneMiddleware', 'postorius.middleware.PostoriusMiddleware') Traceback: File "/usr/lib/python3/dist-packages/django/core/handlers/exception.py" in inner 41. response = get_response(request) File "/usr/lib/python3/dist-packages/django/core/handlers/base.py" in _get_response 187. response = self.process_exception_by_middleware(e, request) File "/usr/lib/python3/dist-packages/django/core/handlers/base.py" in _get_response 185. response = wrapped_callback(request, *callback_args, **callback_kwargs) File "/usr/lib/python3/dist-packages/hyperkitty/lib/view_helpers.py" in inner 134. return func(request, *args, **kwargs) File "/usr/lib/python3/dist-packages/hyperkitty/views/mlist.py" in overview_top_threads 196. 'threads': mlist.top_threads, File "/usr/lib/python3/dist-packages/hyperkitty/models/mailinglist.py" in top_threads 157. return self.cached_values["top_threads"]() File "/usr/lib/python3/dist-packages/hyperkitty/models/common.py" in __call__ 59. return self.get_or_set(*args, **kwargs) File "/usr/lib/python3/dist-packages/hyperkitty/models/mailinglist.py" in get_or_set 365. return [Thread.objects.get(pk=pk) for pk in thread_ids] File "/usr/lib/python3/dist-packages/hyperkitty/models/mailinglist.py" in <listcomp> 365. return [Thread.objects.get(pk=pk) for pk in thread_ids] File "/usr/lib/python3/dist-packages/django/db/models/manager.py" in manager_method 85. return getattr(self.get_queryset(), name)(*args, **kwargs) File "/usr/lib/python3/dist-packages/django/db/models/query.py" in get 380. self.model._meta.object_name Exception Type: DoesNotExist at /hyperkitty/list/direttivo(a)catania.linux.it/top-threads Exception Value: Thread matching query does not exist. Request information: USER: blackout69 GET: No GET data POST: No POST data FILES: No FILES data COOKIES: csrftoken = 'tqNIiLrMWyYNHYhkmnmQfjRdd0AtCeCAAW46VOL24wk2g7Opl5LSZWB2dZ2p79Sb' sessionid = 'brhb9jd3ko9blnluuc6bz3c1627u6h22' META: CONTENT_LENGTH = '' CONTENT_TYPE = '' CSRF_COOKIE = 'tqNIiLrMWyYNHYhkmnmQfjRdd0AtCeCAAW46VOL24wk2g7Opl5LSZWB2dZ2p79Sb' DOCUMENT_ROOT = '/usr/share/nginx/html' HTTPS = 'on' HTTP_ACCEPT = 'text/html, */*; q=0.01' HTTP_ACCEPT_ENCODING = 'gzip, deflate, br' HTTP_ACCEPT_LANGUAGE = 'it-IT' HTTP_COOKIE = 'csrftoken=tqNIiLrMWyYNHYhkmnmQfjRdd0AtCeCAAW46VOL24wk2g7Opl5LSZWB2dZ2p79Sb; sessionid=brhb9jd3ko9blnluuc6bz3c1627u6h22' HTTP_HOST = 'lists.catania.linux.it' HTTP_REFERER = 'https://lists.catania.linux.it/hyperkitty/list/direttivo@catania.linux.it/' HTTP_TE = 'trailers' HTTP_USER_AGENT = 'Mozilla/5.0 (Android 11; Mobile; rv:86.0) Gecko/86.0 Firefox/86.0' HTTP_X_REQUESTED_WITH = 'XMLHttpRequest' PATH_INFO = '/hyperkitty/list/direttivo(a)catania.linux.it/top-threads' QUERY_STRING = '' REMOTE_ADDR = '2.38.155.170' REMOTE_PORT = '39208' REQUEST_METHOD = 'GET' REQUEST_SCHEME = 'https' REQUEST_URI = '/hyperkitty/list/direttivo(a)catania.linux.it/top-threads' SCRIPT_NAME = '' SERVER_NAME = 'lists.catania.linux.it' SERVER_PORT = '443' SERVER_PROTOCOL = 'HTTP/2.0' uwsgi.core = 1 uwsgi.node = b'glugct.catania.linux.it' uwsgi.version = b'2.0.18-debian' wsgi.errors = <_io.TextIOWrapper name=2 mode='w' encoding='UTF-8'> wsgi.file_wrapper = '' wsgi.input = <uwsgi._Input object at 0x7f0e65582f00> wsgi.multiprocess = False wsgi.multithread = True wsgi.run_once = False wsgi.url_scheme = 'https' wsgi.version = '(1, 0)' Thank you in advance -- blackout69

3 9

How to disable subscribe by mail in mailman3?
by Thomas Koch March 1, 2021

March 1, 2021

Hello, I've setup a mailman3 for an organization. Organization members are authenticated by an LDAP backend and can thus use the web UI to subscribe. To avoid unnecessary moderation, I'd like to disable subscription by mail but still allow subscription through the web interface. (I've already hacked some code to dissallow subscribe by mail through posteros.) Regards, Thomas

2 2