May 2023 - Mailman-users - lists.mailman3.org

Mailman sends Welcome emails, but does not send [List] postings emails
by justfixit＠marilynstrother.com 08 Jun '23

08 Jun '23

Having recently installed this same version of mailman (GNU Mailman 3.3.8 (Tom Sawyer)) a few times successfully, I have a puzzle with a current new installation. Via the command line I can create lists and add members, and the new members receive their Welcome message from mailman. But when a member sends an email to post to a list (e.g. hc(a)cs.org as shown here), the mailserver delivers it to mailman: May 29 16:36:58 localhost postfix/lmtp[44386]: E762E427CB: to=<hc(a)cs.org>, relay=127.0.0.1[127.0.0.1]:8024, delay=0.84, delays=0.8/0/0.01/0.03, dsn=2.0.0, status=sent (250 Ok) but no copy is sent to the members / subscribers. After the posts are received by mailman (as recorded in /var/tmp/mailman/logs/smtp.log), nothing more is added in any of the log files in /var/tmp/mailman/logs/... An attempt to imitate a technique seen elsewhere for [logging.smtp] for leaving some breadcrumbs by adding into mailman.cfg: - - - [logging.subscribe] level: debug path: mailman.log - - - and restarting mailman led to no detectable change. Expecting no change, I even changed for one UNmoderated list: >>> dump_json('http://localhost:8001/3.1/lists/hc.cs.org' ... '/config/default_member_action', ... dict(default_member_action='accept'), 'PATCH', ... username='...', password='...') date: Mon, 29 May 2023 16:31:31 GMT server: gunicorn status: 204 the default_member_action from 'defer' to 'accept' to rule out some moderation process delay. How can I enable some kind of trace or gather more information to learn where this configuration is in error? Cheers, Nelson

5 15

Change config to create a new list with all archives off
by Tibor Molnar 02 Jun '23

02 Jun '23

Can archiving be changed anywhere in mailman3 configs, so then all new lists created do not archive by default?

3 6

Why are "Subscription options" left unselected if I don't manually select them?
by mrl＠psfc.mit.edu 01 Jun '23

01 Jun '23

When I subscribe to a mailing list, and I don't manually select some of the "Subscription options", they are left unselected when I go back to look at them. I would have thought that if I didn't make a selection, that they would be set to a default option. Or am I wrong? Thanks.

5 7

Importing mailman 2 shows member's "Moderation Action" = "Default processing". But new members show = "None". Why
by mrl＠psfc.mit.edu 30 May '23

30 May '23

I imported my mailing lists from mailman 2. If I view the Members, it say "Moderation Action" = "Default processing". But when I now subscribe myself or other people to the list, and view the new Members, it say "Moderation Action" = "None" for them. Should that be happening? The mailing list 's "Default action to take when a member posts to the list" setting is set to "Default processing". Thanks. - Mark

2 9

How do you remove the Hold on all non-member forwarded emails?
by Sean Westfall 26 May '23

26 May '23

Hi Mailman3 users, I have recently started using mailman3 and it's a wonderful piece of software. But I am having trouble using one of its configurations. I configured my mailmain3 instance to accept all non-member emails, as I want all emails that are sent to the mailman client to go to all subscribers without having it held for moderation -- I did this by setting this setting: https://i.imgur.com/PGzaD0k.png Action to take for postings from non-members for which no explicit action is defined. (Details for generic_nonmember_action) -> "Accept" But this doesn't work for forwarded emails. Even if the email address that is being forwarded from is included in the "List of non-member addresses whose postings should be automatically accepted." I noticed that all emails that are forwarded to the mailing list are always held for moderation -- though this isn't the case for email that are sent to the mailing list directly. But I want it so that emails that are even forwarded to my mailman mailing list don't get held in moderation. How do I set mailman to do this? I was thinking if there is no way to configure this easily then I might have to do this from the code, which means I might have to ask on the developer mailing list -- or I have to go with an entirely different solution (using something other than mailman3). I hope someone here is willing to help, and in either case thanks for anyone that is willing enough to read this. Sincerely,

2 2

How to edit default 'Reject (with notification)' message
by Zaheer Abbas 26 May '23

26 May '23

Dear all, I want to modify the default text sent in response to when we select 'Reject (with Notification)' in 'Message Acceptance > Default action to take when a non-member posts to the list' settings. Currently, the default rejection text is as follows: "Your message to the $list was rejected for the following reasons: The message is not from a list member The original message as received by Mailman is attached." I have created a template with the option, "Notice sent to a poster when their message has been rejected by the list’s moderator." but it only works if message acceptance is set to 'Hold for Moderation' and then the moderator rejects the post manually. Is there any source file, which I can modify to replace the default rejection text mentioned above? Sincerely, Zee

3 2

Virtual alias + shell
by alopez＠ac.upc.edu 26 May '23

26 May '23

Hello, I want to have a mailman configured together with virtual alias. To do that I need to use alias_domain. I have tried to do it with mailman shell. The domain seams to be created but when I leave the shell and enter again, the domain is not longer there. On the other hand, If I create a domain in administrator interface, it is not listed in the shell. If I create in the web interface, which field correspond to the alias_domain : Domain Name, Display Name , Mail domain? The code I use in the shell is: mailman shell from mailman.interfaces.domain import IDomainManager from zope.component import getUtility manager = getUtility(IDomainManager) from operator import attrgetter def show_domains(*, with_owners=False): if len(manager) == 0: print('no domains') return for domain in sorted(manager, key=attrgetter('mail_host')): print(domain) owners = sorted(owner.addresses[0].email for owner in domain.owners) for owner in owners: print('- owner:', owner) manager.add('example.edu',alias_domain='x.example.edu') show_domains(with_owners=True) exit() Thanks in advance Albert

2 4

Subscribing users stuck in pending hell
by Quanah Gibson-Mount 25 May '23

25 May '23

Hi, We frequently end up with users who never receive their email to confirm their account, leaving them in a netherworld where they cannot become list members. If I try to subscribe them via the mass subscribe option, it says I can't because their subscription is pending. If I go to subscription requests, it says there are 0. If I go to "non-members" in the UI, I can find them, but I don't see an option to convert them to members. So what's the solution to getting these people subscribed and no longer stuck in limbo? Thanks! --Quanah

2 9

not correct language in subject(s)
by Jens Günther 24 May '23

24 May '23

When receiving all types of system mails from mailman3 (3.3.8) there are almost all the subjects in English, althought text is in German. Am I missing somehting? The option to have the list in german is toggled and so far all the mails are in german ... also templates on different levels work fine, either en or de, but obviously the subjects are not translated (?) or taken from an English template. Any hint is appreciated, regards, Jens.

2 6

Please contact me Odhiambo Washington...
by Marisa Giancarla 24 May '23

24 May '23

For some reason your mail got deleted, not sure why, and I don't have your email address saved :( Sorry to bother others... Marisa

2 1

Mailman-users May 2023