- Mailman-users - lists.mailman3.org

List admin statistics
by Andrew Hodgson June 26, 2018

June 26, 2018

Hi, On my Mailman3 installation the posting statistic doesn't seem to be getting reset, the digest stat is showing correctly however. Not sure about the volume stat. I imported my list from a Mailman2 pck file and the last posting data is the last message that went via Mailman2. Any ideas? Thanks. Andrew.

2 1

Gmail/Fetchmail in Mailman3?
by Bill Christensen June 24, 2018

June 24, 2018

Hi folks, We're (finally) in the early stages of upgrading from Mailman2 to Mailman3. Our Mailman2 setup uses Fetchmail to retrieve list mail from our accounts on Gmail. Is there a similar setup for Mailman3? I admit that I've only done a light scan of the docs so far, but haven't found anything addressing such a scenario. Thanks in advance! -- Bill Christensen http://SustainableSources.com http://LinkedIn.com/in/billc108 Dance like nobody's watching. Encrypt like everyone is. --Adrián Lamo

2 3

Header / Footer apear as attachements on Outlook / Office365
by Asaf Ohayon June 21, 2018

June 21, 2018

Trying to play with Header / Footer working OK on normal email clients, But on office they apear as attached txt files. Any Idea ? -- Asaf Ohayon SRE | SysBind M: +972 547920828 P: + 972 3 5096219 E: asaf(a)sysbind.co.il Rothschild 60, Bat Yam www.sysbind.co.il

2 1

Avoiding reply to list when User does "Reply To All"
by Asaf Ohayon June 19, 2018

June 19, 2018

hello I've played with explicit reply-to address, and "Reply goes to list" -> "Explicit Reply-to headers set", And it works fine when user does "Reply" in the client (e.g: gmail), But when she presses Reply To All, still it sends also to the list, Is there some way to avoid this ? Thanks -- Asaf Ohayon SRE | SysBind M: +972 547920828 P: + 972 3 5096219 E: asaf(a)sysbind.co.il Rothschild 60, Bat Yam www.sysbind.co.il

2 1

HTML header / footer template
by Asaf Ohayon June 18, 2018

June 18, 2018

Is it possible to put HTML header to allow inserting images ? Thanks -- Asaf Ohayon

2 4

Functionailty of web host domains
by Johannes Winter June 16, 2018

June 16, 2018

Hello everybody, I'd actually like to use mailman3 in a multi-site setup, so that lists are only accessible from corresponding domains. I already asked once oif this would be possible with domain admins, but that is not implemented: https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… Then i was asking myself whether it could be possible with the "wed host" functionality. For each domain you can specify a "web host". But when I specify a different one than the default for one domain, and make it accessible with specifying `DJANGO_ALLOWED_HOSTS`, all mailinglists from the other web hosts are also shown when I access the second site. So does this 'web host' option have a meaning, or is it just an alias for the first site? Best regards, Johannes Winter

2 1

Migrate from mysql to postgresql
by Bjoern Franke June 14, 2018

June 14, 2018

Hi, is it possible to migrate a mailman3-mysql-database to a postgresql-database? I tried to convert it with pgloader, but some identifiers had to be cut off: _address_id); 2018-03-17T21:33:39.087000+01:00 WARNING PostgreSQL warning: Bezeichner idx_680560_account_emailconfirm_email_address_id_5b7f8c58_fk_account_e wird auf idx_680560_account_emailconfirm_email_address_id_5b7f8c58_fk_ac gekrzt Kind regards Bjoern

2 2

Disable like button
by Marvin Gülker June 13, 2018

June 13, 2018

Hi everyone, is it possible to disable the facebookish like/dislike thumbs buttons on posts in Hyperkitty? I have the impression that this kind of functionality discourages useful, argumentative discussion and instead causes emotional voting without arguments on whatever is at hand (it is one of the features I would really like to disable on GitHub as well). A voting facility on its own is surely fine, but it shouldn't be on each post, but only where one actually wants to cast a vote. Also, one isn't informed of the thumbs up/thumbs down count when only using the email interface and not Hyperkitty. This can lead to confusion for users that only use Hyperkitty and feel their "votes" are being ignored. Marvin -- Blog: https://mg.guelker.eu PGP/GPG ID: F1D8799FBCC8BC4F

3 2

Is there a reason not to implement the config_list command ?
by Asaf Ohayon June 11, 2018

June 11, 2018

Hello Is it meant to be implemented ? and if so, how is it recommended to do (for someone new to mailman 3 programming) Thanks

2 1

What is result of planned MM3 integrated installation at Pycon?
by Tom Browder June 10, 2018

June 10, 2018

I may have missed the announcement, but I thought it was hoped to get a major leap toward an integrated MM3 installation at the May Pycon. Did anything exciting happen toward that goal, or should I just press on with the latest release? Thanks. Best regards, -Tom

2 3

Scheduled tasks
by Darren Smith June 8, 2018

June 8, 2018

All, I am looking more through the documentation of the Mailman Suite here: https://media.readthedocs.org/pdf/gnu-mailman/latest/gnu-mailman.pdf In section 3.2.5 it talks about the scheduled tasks that need to be run to do "specific routine functions" in hyperkitty. I installed through the easy install script found here: https://github.com/iomarmochtar/mailman3_ei/ However, I can't find anything in THAT documentation that talks about these cron jobs, and in fact the Mailman Suite isn't installed through that script. Can someone point me to any other documentation about the tasks that need to be run on a continual basis? Our hyperkitty installation seems to be bogging down more and more, and I am hoping that it will be as simple as just running some jobs that haven't been on our radar. Thoughts? -Darren

2 3

Attachments
by Darren Smith June 6, 2018

June 6, 2018

Guys, Is there a setting to disallow attachments in mailman3? Doing a cursory search I can't find it.

3 2

Re: GDPR - save subscriptions confirmation emails
by contact＠maadix.net June 4, 2018

June 4, 2018

Thanks Selva for you answer. In my Mailman 3 installation there is no /var/log/mailman/subscribe I have logs about confirmations emails in mailman/var/logs/smtp.log the format is the following: Jun 03 13:45:27 2018 (20764) ('127.0.0.1', 40145) handling connection Jun 03 13:45:27 2018 (20764) ('127.0.0.1', 40145) Data: b'LHLO mails.example.com' Jun 03 13:45:27 2018 (20764) ('127.0.0.1', 40145) Data: b'MAIL FROM:<contact(a)maadix.net>' Jun 03 13:45:27 2018 (20764) ('127.0.0.1', 40145) sender: contact(a)example.net Jun 03 13:45:27 2018 (20764) ('127.0.0.1', 40145) Data: b'RCPT TO:<prueba-confirm+7c010b0d89513b26d72cb4642e80447a2280ac86(a)list.example.org>' Jun 03 13:45:27 2018 (20764) ('127.0.0.1', 40145) recip: prueba-confirm+7c010b0d89513b26d72cb4642e80447a2280ac86(a)list.example.org Jun 03 13:45:27 2018 (20764) ('127.0.0.1', 40145) Data: b'DATA' Jun 03 13:45:27 2018 (20764) ('127.0.0.1', 40145) Data: b'QUIT' So, one solution that comes to my mind is to grep this log file. This is not a perfect solution and the full confirmation email is still missing. I am not sure if this would be GDPR compliant. Maddish El 03/06/18 a las 18:17, Selva Nair escribió: > Hi, > > On Sun, Jun 3, 2018 at 10:12 AM, contact(a)maadix.net <contact(a)maadix.net> wrote: >> >> Hi, >> >> I am new in the list. I have been looking for this topic in the archives >> in order to avoid duplicate, but I could not find any thread. >> >> According to the new GDPR rules, lists owners need to have a >> confirmation from subscribers, and this is easy to do with Mailman 3. >> >> What I can't figure out is how to save all the confirmation emails >> received from users. >> >> I only see the confirmations commands emails in the logs, >> >> Is there another place/way to store them? > > We have been doing this with mailman2 since Canadian Anti-Spam Law (CASL) > got enacted (2014) by independently archiving the confirmation messages. > With postfix we use recipient_bcc_maps and a script to do some extra filtering > but its clunky, and does not check that the confirmation succeeded or not. > > A feature within mailman to archive successful confirmations would be > useful. Keeping unsubscribe requests and evidence of subsequent > actions also seems necessary at least as per CASL. > > That said, we also keep the /var/log/mailman/subscribe logs (not sure > what that would be in mailman 3). Although the log has a single line > for each action, it may be enough to show (?) that a double opt-in process > was properly followed or unsub request was acted up on. > > Thanks, > > Selva > -- Maadix *MaadiX* Tu nube en tus manos https://maadix.net https://twitter.com/MaadiXnet

3 3

Delete User
by Kaleb White May 25, 2018

May 25, 2018

Is it possible to delete a user from postorius completely so that they cannot log in again?

2 4

Urgent help needed...
by Darren Smith May 24, 2018

May 24, 2018

Hello, This morning our Mailman 3/Hyperkitty/Postorius installation has become unresponsive. When looking at the machine, postgres is pegging all 4 CPUs on the machine. We did some digging in postgres, and here is the query that is causing problems: "SELECT hyperkitty_email.date FROM hyperkitty_email WHERE hyperkitty_email.mailinglist_id = 'fooey(a)rootsweb.com' ORDER BY hyperkitty_email.date ASC LIMIT 1;" We have found that it doesn't matter what mailinglist_id is being used. We have also found that this might be an issue with the LIMIT 1 - our investigation is showing that using LIMIT 1 in postgres makes things execute very differently than if you use a limit 2 or more, and that this is probably what is going on. Basically, every time this gets called, it pegs an entire CPU for 20-30 seconds. It appears to be called a LOT. So our users are getting 504 gateway timeouts right now. What has changed: We have been in the process of importing our 40 million archived emails from our old mailman 2 archives. Questions: 1) We have tried doing a grep in the codebase - mailman3, hyperkitty, postorius, django - basically anything that might be calling this code, but we can't find it. Does anyone know what generates this query? 2) We are positing that it might be our archive imports that are causing this problem. Does anyone know of any sort of limit/threshold that might cause this to go haywire? Any help you can give, any direction you can point us would be useful. Right now our lists are just down for our users. Thank you, Darren

2 2

Is it possible to use an authenticator with incorrect, missing, or changing email addresses?
by andrew＠fsf.org May 24, 2018

May 24, 2018

Hello Mailman 3 users list, I was wondering if it's possible to set up a CAS authenticator with django-allauth ( https://pypi.org/project/django-allauth-cas/ ) even if we cannot guarantee the correctness of email addresses supplied by our CAS instance? Some contacts may also be missing an email address. I read about this here, and it seems like it wouldn't be possible: http://docs.mailman3.org/en/latest/config-web.html#configure-social-login > To see a list of all the providers, please have a look at the documentation of django-allauth. Make sure that the one you choose provides “email” as part of user data, otherwise it won’t work with Mailman. e.g. Twitter doesn’t give out emails. What if a user's email address changes on the CAS server? Will their email address in Mailman 3 be updated the next time they log in? Thanks, Andrew

2 1

What implications do GDPR have on Mailman, and how to requiring members to accept registration
by Henrik Rasmussen May 23, 2018

May 23, 2018

In regards to GDPR*) I am wondering if there is any ways I can require my current and future subscribers, members and list administrators to accept registration. I am also concerned that new lists are created with a subscription policy "Confirm" as default, rather than at least "Moderate", which can cause people to be subscribed by others against there will. Also, regardless of this setting, administrators can subscribe people without their knowledge. Away from Gravatar, mentioned in another post, what implications do GDPR have on Mailman? *) http://eur-lex.europa.eu/legal-content/EN/TXT/?qid=1510481733260&uri=CELEX%… Henrik Rasmussen

4 6

No archived messages in hyperkitty
by Eric Abrahamsen May 12, 2018

May 12, 2018

I've got mailman3 up on Ubuntu 16.04, in a virtualenv, and (eventually) got everything working mostly okay. My last hurdle is archiving into hyperkitty: the web interface says "no archived list yet". The list I'm starting with is set to archive both to prototype (which I set up in the beginning, before I got hyperkitty going) and to hyperkitty. There appear to be no further boxes I can check, and mailman_hyperkitty.cfg is in place and I think correct. I think it's nearly working because new messages get filed to ./var/archives/hyperkitty/spool, in individual *.pck files, but then these files don't go anywhere, and the archives don't appear in the web view. It could be a problem with cronjobs, with qrunner, or maybe there's just one last hidden switch in a database somewhere that I haven't thrown. But I can't find anything. Any hints? TIA, Eric

2 3

List enumeration problem
by kawhite＠ancestry.com May 11, 2018

May 11, 2018

On our mailman instance we see the following enumeration of ALL lists and ALL users consistently every 7.5 minutes. Does anyone know why this would be the case? We have a lot of mailing lists so it slows our machine down a lot. Apr 30 15:31:36 2018 (39026) 127.0.0.1 - - "GET /3.0/lists/a(a)example.com HTTP/1.1" 200 310 Apr 30 15:31:36 2018 (39026) 127.0.0.1 - - "GET /3.0/lists/a(a)example.com/config HTTP/1.1" 200 2021 Apr 30 15:31:36 2018 (39026) 127.0.0.1 - - "GET /3.0/lists/b(a)example.com HTTP/1.1" 200 325 Apr 30 15:31:37 2018 (39026) 127.0.0.1 - - "GET /3.0/lists/b(a)example.com/config HTTP/1.1" 200 2108 Apr 30 15:31:37 2018 (39026) 127.0.0.1 - - "GET /3.0/lists/c(a)example.com HTTP/1.1" 200 326 Apr 30 15:31:37 2018 (39026) 127.0.0.1 - - "GET /3.0/lists/c(a)example.com/config HTTP/1.1" 200 2049 Apr 30 15:31:37 2018 (39026) 127.0.0.1 - - "GET /3.0/lists/d(a)example.com HTTP/1.1" 200 324 ... Apr 30 16:26:28 2018 (9581) 127.0.0.1 - - "GET /3.0/users/a@a HTTP/1.1" 404 13 Apr 30 16:26:28 2018 (9581) 127.0.0.1 - - "GET /3.0/users/b@b HTTP/1.1" 404 13 Apr 30 16:26:28 2018 (9581) 127.0.0.1 - - "GET /3.0/users/c@c HTTP/1.1" 404 13 Apr 30 16:26:28 2018 (9581) 127.0.0.1 - - "GET /3.0/users/d@d HTTP/1.1" 404 13

4 3

Subscribe only to one thread
by Ivan Perez May 8, 2018

May 8, 2018

Dear Mailman users, There are many high-traffic mailing lists in which I would only be interested in receiving messages in specific threads (not all messages, nor some topics, nor a daily digest). Is there a way of "subscribing" to individual threads only, mainly those I initiate, or I actively participate in, but generally not receiving any emails from the list? If not, would others find this useful, and could it be implemented? (I understand that everyone wants features; I just don't know if it's a 2-hour patch or a 2-month project). Best wishes Ivan

2 2

Mailman, Supervisor, and keeping things running
by Darren Smith May 7, 2018

May 7, 2018

Hello, Previously I had a problem when upgrading to the newest versions of the mailman modules - and it turns out that everything requires Python 3 or higher. That was fine - I spent some time today moving everything from a Python 2.7 virtual environment to a Python 3.6 virtual environment. What no longer works is Supervisor... The mailman easy install script from Omar Mochtar set up a webui service that runs wsgi and nginx and keeps them running. However...supervisor won't run on python 3.6. I'm not seeing a way to make that work. I've read that you can shim it in, but that it isn't recommended to be used in a production environment. I've looked into circus, and I'm not familiar with it. I'm wondering if anyone has any examples of setting up a service that keeps processes up and running? I've seen circus, but I'm wondering if anyone has an example of how to set it up, or another service that does the same thing? -Darren

3 4

Message Personalization: embed User name in header/footer‏
by Asaf Ohayon May 7, 2018

May 7, 2018

Hello I'm trying to find info on how to embed personal details in message's header/footer Is it possible with mailman 3, if this is not implemented, how one start such feature ? Thanks -- Asaf Ohayon SRE | SysBind M: +972 547920828 P: + 972 3 5096219 E: asaf(a)sysbind.co.il Rothschild 60, Bat Yam www.sysbind.co.il

3 7

Could Mailman3 act like a private forum?
by andrew＠fsf.org May 6, 2018

May 6, 2018

Hello Mailman3 users and maintainers, I'm wondering whether it would be possible for Mailman3 to act like a private forum. I know that Mailman3 has private lists and may allow for custom authenticators. However making some lists private seems to be different than making all list signups and archives public to those who are able to log in, but hidden from all users who cannot. Would Mailman3 be able to act like a forum that hides or shows lists based on whether someone is logged in? Thanks, Andrew

2 1

django-mailman3 update causing errors
by Darren Smith May 2, 2018

May 2, 2018

Hello, In attempting to update our mailman3/postorius/hyperkitty installation, I have run into an error after upgrading the django-mailman3 project. Our webui is being run through supervisord. The command being run is this: /<path>/mailman3/conda/envs/mailman3_ext/bin/waitress-serve --listen=localhost:8787 webui.wsgi:application The error I'm getting is pretty long, but most of it appears to be usage instructions. Here are what I believe to be the pertinent parts: Error: Bad module 'webui.wsgi' Usage: waitress-serve [OPTS] MODULE:OBJECT <lots and lots of usage instructions> There was an exception (ImportError) importing your module. It had these arguments: 1. No module named error Any thoughts on why updating django-mailman3 would cause this? Thanks! -Darren

3 4

Hyperkitty Search box result in error 500
by Carlos R Laguna May 2, 2018

May 2, 2018

Hello everyone, i have being using maxking's docker images for mailman 3 without any issue this far, unfortunately recently i found a problem with the search option in the archive, if i try to search for anything i got a error 500 Hyperkkity 1.1.4 docker exec mailman-web ./manage.py update_index --verbosity 2: https://paste.ubuntu.com/p/nS9htVcxp7/ I suspect that at some point while archiving mails something went wrong, but no sure. Any idea how to fix or debug further. Thanks in advance. -- Carlos R Laguna Mendoza Subdtor. Grp Técnico Tinored Joven Club de Computación y Electrónica Tel: 52793189, 7863-3174, 7868-4230

2 1

Hyperkitty Archives Empty
by jon.kokko＠us.fujitsu.com May 2, 2018

May 2, 2018

I've installed the mailman bundle located here (https://github.com/iomarmochtar/mailman3_ei) and, minus a pip package or two, it was straightforward. Mail & list functionality appears to be working well but I have no archives/thread discussions after posting messages. Delivery, etc.. is all good. Can you offer some suggestions on how to debug the archiving piece? Thanks, ./JK

3 2

Domain admin
by Johannes Winter April 29, 2018

April 29, 2018

Hello everybody, We would like to give our users the priviledge to create lists per domain. I Haven't found any options for that in the web interface. Is this possible somehow with mailman3? Best regards, Johannes

2 2

Rejecting held emails
by Darren Smith April 26, 2018

April 26, 2018

Hello, We recently had a phishing message make it through our spam filters and arrive at a mailing list. The good news is that since it was not from a list member it was in the held message queue. I was able to find the message in the var/messages directory by searching for a keyword in the subject. However, after rejecting the message from Postorius, the message doesn't seem to be removed from the var/messages directory. Is this expected behavior? I know that infosec people won't be too happy about a phishing email sitting around on our disk. (Infosec guys are notoriously paranoid. :) ) Is there some sort of cleanup process that would remove these messages? If not, does this pose an issue where over time disk usage will creep up? This could be a pretty significant problem if that is the case. What do you think, sirs? -Darren

2 2

Disabling Gravatar
by Marvin Gülker April 26, 2018

April 26, 2018

Hi everyone, I want to make you aware of a potential privacy problem in Mailman's Hyperkitty. Under the upcoming EU General Data Protection Regulation (GDPR)[1], which will be in force as of 2018-05-25, it is illegal to transmit data to third parties without a right to do so. Without going into the details, the inclusion of third party services into one's website is usually deemed such a transmission, and unless one has explicit consent of the user (e.g., by an optional (!), unticked ticking box) this is normally illegal (if one targets EU users). The GDPR does not affect private and family use (Art. 2(2)(c) GDPR), but the exact reach of that clause is yet to be determined; it certainly does not exclude company use of Mailman. I've found it's possible to disable the social login providers quite easily (we had this discussion here on the mailinglist recently), but I don't see an option to disable Gravatar. If there is one, please enlighten me, but anyway I want to propose this as a feature request against Hyperkitty. A GDPR-compliant implementation of Gravatar in Mailman would look like this: * In order to not transmit website visitor's data (IP address, browser info, etc) to Gravatar, Hyperkitty has to request the avatar image itself and not leave that to the user's browsers to do. In other words, the HTTP GET request needs to come from the server running Hyperkitty and the user's browser then just requests the avatar from the Hyperkitty server. Most likely easiest way to do this is to pre-download the avatar when an email is archived. * In order to not transmit the subscribers' data (email address, allows Gravatar to track the subscriber) to Gravatar illegally, the retrieval of the avatar image from Gravatar has to be disabled by default. Instead, an option needs to be added to the subscriber's control panel which he has to actively enable in order to have his Gravatar downloaded and thus used (privacy-by-default rule). I'm not saying Gravatar tracks people and sells the information gathered, though I have doubts on how Automattic makes money with the service. I'm just outlining the legal duties under the upcoming GDPR for service owners, which are independant of how Automattic processes the data in this specific case. Please don't dismiss this as some side feature not needed. The fines that can be imposed on service owners due to violation of the GDPR are very high (up to 20,000,000 € [that's 20 million euros, really]). Marvin [1]: http://eur-lex.europa.eu/legal-content/EN/TXT/?qid=1510481733260&uri=CELEX:… -- Blog: https://www.guelkerdev.de PGP/GPG ID: F1D8799FBCC8BC4F

5 5

Mailman not able to process "big" requests
by Jonas Felber April 24, 2018

April 24, 2018

Hi, We migrated from mailman2 to mailman3 a week ago. Since then we are unable to send messages the our students through the mailing list. Here are some symptoms: 1. I go to mass subscribe and subscribe 400 emails 2. I click subscribe, the browser (in my case safari) tries to load the page for a few seconds 3. The request times out 4. Once the service becomes responsible again, I see that only part of my emails got subscribed (~50 in this case). For me this really looks like the emails are sent on the "web-thread" that gets killed once the request times out. Looking at this https://gitlab.com/mailman/postorius/blob/master/src/postorius/views/list.p… <https://gitlab.com/mailman/postorius/blob/master/src/postorius/views/list.p…> seems to confirm my suspicions. Some quick overview of our infrastructure: The TCP endpoints are: browser -> haproxy in kubernetes-entry-router -> nginx in kubernetes-ingress -> nginx in mailman -> mailman We mitigated the issue by giving it more CPU power and increasing the timeouts in one of the nginx endpoints. We also have a problem with sending out emails to "large" (>50) groups, as they seem to not getting sent out at all. Do you have any idea what the problem here could be? We would be really glad if you can help us getting our mailman up and running, as I currently have to send emails out by "hand". I will happily provide you with more details about our configuration, just let me know what you need. Kind regards, Jonas Jonas Felber <jonas.felber(a)vis.ethz.ch <mailto:jonas.felber@vis.ethz.ch>> Aktuar & CTF Präsident VIS - Verein der Informatik Studierenden an der ETH Zürich CAB E 31, Universitätstr. 6, ETH Zentrum, CH-8092 Zürich https://www.vis.ethz.ch <https://www.vis.ethz.ch/>

4 4

Another interesting error...
by Darren Smith April 24, 2018

April 24, 2018

So it appears that there was a message sent to one of our mailing lists that was put into the held message queue. However, when attempting to go to the message to do the moderation, the web page returns and Error 500. Looking in the mailman log, I found this: Apr 23 14:21:02 2018 (17878) REST request handler error: Traceback (most recent call last): File "/opt/mailman3/conda/lib/python3.6/wsgiref/handlers.py", line 137, in run self.result = application(self.environ, self.start_response) File "/opt/mailman3/conda/lib/python3.6/site-packages/mailman/database/transac tion.py", line 50, in wrapper rtn = function(*args, **kws) File "/opt/mailman3/conda/lib/python3.6/site-packages/mailman/rest/wsgiapp.py" , line 214, in __call__ return super().__call__(environ, start_response) File "/opt/mailman3/conda/lib/python3.6/site-packages/falcon/api.py", line 227 , in __call__ responder(req, resp, **params) File "/opt/mailman3/conda/lib/python3.6/site-packages/mailman/rest/post_modera tion.py", line 167, in on_get resource = self._make_collection(request) File "/opt/mailman3/conda/lib/python3.6/site-packages/mailman/rest/helpers.py" , line 159, in _make_collection for resource in collection] File "/opt/mailman3/conda/lib/python3.6/site-packages/mailman/rest/helpers.py" , line 159, in <listcomp> for resource in collection] File "/opt/mailman3/conda/lib/python3.6/site-packages/mailman/rest/post_modera tion.py", line 157, in _resource_as_dict resource = self._make_resource(request.id) File "/opt/mailman3/conda/lib/python3.6/site-packages/mailman/rest/post_modera tion.py", line 100, in _make_resource make_header(decode_header(resource['subject']))) File "/opt/mailman3/conda/lib/python3.6/email/header.py", line 174, in make_he ader h.append(s, charset) File "/opt/mailman3/conda/lib/python3.6/email/header.py", line 295, in append s = s.decode(input_charset, errors) UnicodeDecodeError: 'gb2312' codec can't decode byte 0x87 in position 2: illegal multibyte sequence It LOOKS as if there might be a character in the email somewhere - possibly in the subject or sender fields? - that is somehow unexpected. I am attempting to find the held message - can someone point me where I can go to see the message so that I can see what might be causing the problem? -Darren

4 11

sass error
by Alexander Klotz April 20, 2018

April 20, 2018

Hi everybody, we tried to make a fresh installation out of the current version following the readme.md - we encounter the following error trying to do so. As mentioned elsewhere, 'sass' has been replaced by 'sassc', however, maybe somewhere there is still a reference to it that may have been overlooked? The answer to a similar error posted to this list in August 2017 unfortunately didn't help either. Any help would be appreciated! Thanks, Alex ERROR 2018-04-19 09:07:49,096 29 django.request Internal Server Error: /accounts/login/ Traceback (most recent call last): File "/usr/local/lib/python2.7/site-packages/django/core/handlers/exception.py", line 41, in inner response = get_response(request) File "/usr/local/lib/python2.7/site-packages/django/core/handlers/base.py", line 249, in _legacy_get_response response = self._get_response(request) File "/usr/local/lib/python2.7/site-packages/django/core/handlers/base.py", line 217, in _get_response response = self.process_exception_by_middleware(e, request) File "/usr/local/lib/python2.7/site-packages/django/core/handlers/base.py", line 215, in _get_response response = response.render() File "/usr/local/lib/python2.7/site-packages/django/template/response.py", line 107, in render self.content = self.rendered_content File "/usr/local/lib/python2.7/site-packages/django/template/response.py", line 84, in rendered_content content = template.render(context, self._request) File "/usr/local/lib/python2.7/site-packages/django/template/backends/django.py", line 66, in render return self.template.render(context) File "/usr/local/lib/python2.7/site-packages/django/template/base.py", line 207, in render return self._render(context) File "/usr/local/lib/python2.7/site-packages/django/template/base.py", line 199, in _render return self.nodelist.render(context) File "/usr/local/lib/python2.7/site-packages/django/template/base.py", line 990, in render bit = node.render_annotated(context) File "/usr/local/lib/python2.7/site-packages/django/template/base.py", line 957, in render_annotated return self.render(context) File "/usr/local/lib/python2.7/site-packages/django/template/loader_tags.py", line 177, in render return compiled_parent._render(context) File "/usr/local/lib/python2.7/site-packages/django/template/base.py", line 199, in _render return self.nodelist.render(context) File "/usr/local/lib/python2.7/site-packages/django/template/base.py", line 990, in render bit = node.render_annotated(context) File "/usr/local/lib/python2.7/site-packages/django/template/base.py", line 957, in render_annotated return self.render(context) File "/usr/local/lib/python2.7/site-packages/django/template/loader_tags.py", line 177, in render return compiled_parent._render(context) File "/usr/local/lib/python2.7/site-packages/django/template/base.py", line 199, in _render return self.nodelist.render(context) File "/usr/local/lib/python2.7/site-packages/django/template/base.py", line 990, in render bit = node.render_annotated(context) File "/usr/local/lib/python2.7/site-packages/django/template/base.py", line 957, in render_annotated return self.render(context) File "/usr/local/lib/python2.7/site-packages/compressor/templatetags/compress.py", line 131, in render return self.render_compressed(context, self.kind, self.mode, forced=forced) File "/usr/local/lib/python2.7/site-packages/compressor/templatetags/compress.py", line 107, in render_compressed rendered_output = compressor.output(mode, forced=forced) File "/usr/local/lib/python2.7/site-packages/compressor/css.py", line 49, in output ret.append(subnode.output(*args, **kwargs)) File "/usr/local/lib/python2.7/site-packages/compressor/css.py", line 51, in output return super(CssCompressor, self).output(*args, **kwargs) File "/usr/local/lib/python2.7/site-packages/compressor/base.py", line 295, in output output = '\n'.join(self.filter_input(forced)) File "/usr/local/lib/python2.7/site-packages/compressor/base.py", line 235, in filter_input for hunk in self.hunks(forced): File "/usr/local/lib/python2.7/site-packages/compressor/base.py", line 205, in hunks precompiled, value = self.precompile(value, **options) File "/usr/local/lib/python2.7/site-packages/compressor/base.py", line 268, in precompile return True, filter.input(**kwargs) File "/usr/local/lib/python2.7/site-packages/compressor/filters/base.py", line 229, in input return super(CachedCompilerFilter, self).input(**kwargs) File "/usr/local/lib/python2.7/site-packages/compressor/filters/base.py", line 196, in input raise FilterError(err) FilterError: /bin/sh: sass: not found

2 2

Re: Question regarding serve_from_domain
by Alexander Klotz April 20, 2018

April 20, 2018

Hi Steve, thanks for your answer - we've made a completely new installation and don't encounter this specific error anymore, so we won't need an answer for that at the moment. Best, Alex Am 20.04.18 um 09:47 schrieb Stephen J. Turnbull: > Did you ever get an answer to this? I will have some time to look > into it over the weekend (I've been away from coding in core dev for a > while, so no answer offhand), but I'd like to know if you still need > an answer before spending time on it. :-) > > Steve > > Alexander Klotz writes: > > Hello, > > > > we're currently unsure in which file the serve_from_domain-entry > > described in the readme.md regarding mailman-web. We just updated the > > docker and encounter the following error, which might correspond to the > > missing entry: > > > > OSError: [Errno 13] Permission denied: '/opt/mailman-web/fulltext_index' > > > > Any help would be appreciated - thanks! > > > > > > -- > > Regards, > > Alex Klotz > > > > (culturebase editorial staff) > -- Mit freundlichen Grüßen, Alexander Klotz (redaktion kulturserver) mailto:alexk@kulturserver.de Stiftung kulturserver.de gGmbH Lothringerstraße 23 D-52062 Aachen http://ggmbh.kulturserver.de Geschäftsführer: Wolfgang Knauff Amtsgericht Aachen* *Handelsregister-Nr.:B 10515 Umsatzsteuer-Identifikations-Nr.:DE DE 230868040

1 0

Outgoing messages fro Mailman fails DMARC
by Henrik Rasmussen April 19, 2018

April 19, 2018

I have set up Postfix to DKIM sign outgoing mails from GNU Mailman 3.2.0a1 which validates nicely ("dkim=pass (signature was verified)"), but DMARC fails ("dmarc=fail action=none") on the recipient end, probably because the "header.from=gmail.com;" (or similar) which means that DKIM d= will not match. According to dmarc.org*) "Mailing lists usually do not take authorship of the emails they relay" so I should "consider to apply specific rules for emails coming from mailing lists". Also according to dmarc.org*) Mailman (Mailman 2 that is, and I presume Mailman 3 does too) "include features to interoperate with DMARC senders". I assume that the dmarc mitigations list settings in Mailman is for incoming messages, but how do I set Mailman to cope with this on outgoing messages? Note: I have more than one list domain in Mailman 3. *) https://dmarc.org/wiki/FAQ#Is_there_special_handling_required_to_receive_DM… /Henrik

2 3

Upgrade
by Darren Smith April 16, 2018

April 16, 2018

Hello all, I'm working on upgrading our mailman3 instance. The current running instance is 3.1.0, and I am attempting to move to 3.2.0a1. Partially because La Villa Strangiato is a better song than Between the Wheels, but mostly because we want some of the bug fixes, and we are nailing down our upgrade process for the future. Initially after updating when I ran the "mailman info" command, I got this: Traceback (most recent call last): File "/opt/mailman3/conda/bin/mailman", line 7, in <module> from mailman.bin.mailman import main File "/opt/mailman3/conda/lib/python3.6/site-packages/mailman/bin/mailman.py", line 19, in <module> import click ModuleNotFoundError: No module named 'click' So I went and installed click - easy enough to do. But then I get this error: "Traceback (most recent call last): File "/opt/mailman3/conda/bin/mailman", line 11, in <module> sys.exit(main()) File "/opt/mailman3/conda/lib/python3.6/site-packages/click/core.py", line 722, in __call__ return self.main(*args, **kwargs) File "/opt/mailman3/conda/lib/python3.6/site-packages/click/core.py", line 696, in main with self.make_context(prog_name, args, **extra) as ctx: File "/opt/mailman3/conda/lib/python3.6/site-packages/click/core.py", line 621, in make_context self.parse_args(ctx, args) File "/opt/mailman3/conda/lib/python3.6/site-packages/click/core.py", line 1018, in parse_args rest = Command.parse_args(self, ctx, args) File "/opt/mailman3/conda/lib/python3.6/site-packages/click/core.py", line 880, in parse_args value, args = param.handle_parse_result(ctx, opts, args) File "/opt/mailman3/conda/lib/python3.6/site-packages/click/core.py", line 1404, in handle_parse_result self.callback, ctx, self, value) File "/opt/mailman3/conda/lib/python3.6/site-packages/click/core.py", line 78, in invoke_param_callback return callback(ctx, param, value) File "/opt/mailman3/conda/lib/python3.6/site-packages/mailman/bin/mailman.py", line 93, in initialize_config initialize(value) File "/opt/mailman3/conda/lib/python3.6/site-packages/mailman/core/initialize.py", line 219, in initialize initialize_2(propagate_logs=propagate_logs) File "/opt/mailman3/conda/lib/python3.6/site-packages/mailman/core/initialize.py", line 178, in initialize_2 config.db = getUtility(IDatabaseFactory, utility_name).create() File "/opt/mailman3/conda/lib/python3.6/site-packages/mailman/database/factory.py", line 54, in create database.initialize() File "/opt/mailman3/conda/lib/python3.6/site-packages/mailman/database/base.py", line 107, in initialize url, isolation_level='READ UNCOMMITTED', pool_pre_ping=True) File "/opt/mailman3/conda/lib/python3.6/site-packages/sqlalchemy/engine/__init__.py", line 387, in create_engine return strategy.create(*args, **kwargs) File "/opt/mailman3/conda/lib/python3.6/site-packages/sqlalchemy/engine/strategies.py", line 160, in create engineclass.__name__)) TypeError: Invalid argument(s) 'pool_pre_ping' sent to create_engine(), using configuration PGDialect_psycopg2/QueuePool/Engine. Please check that the keyword arguments are appropriate for this combination of components." Anyone able to point me where to go to look for a solution for this? We're running postgresql as the database, and psycopg2 has been installed. Thoughts? -Darren

2 7

Question regarding serve_from_domain
by Alexander Klotz April 13, 2018

April 13, 2018

Hello, we're currently unsure in which file the serve_from_domain-entry described in the readme.md regarding mailman-web. We just updated the docker and encounter the following error, which might correspond to the missing entry: OSError: [Errno 13] Permission denied: '/opt/mailman-web/fulltext_index' Any help would be appreciated - thanks! -- Regards, Alex Klotz (culturebase editorial staff)

1 0

Starting from scratch
by Benjamin Ragheb April 12, 2018

April 12, 2018

Hello! Over the weekend, I attempted to install the Mailman Suite on Debian Stretch. My goal is to set up some low volume mailing lists for family and friends. I ran into some problems, and I'm hoping to get some feedback on my overall approach before I make my second attempt. :-) I figured the safest thing to do would be to use pip to install the latest released version of all the components (core, postorius, hyperkitty, etc.). I copied the files from the [mailman-suite repository][1] to set up a Django project and got it mostly working with Apache and mod_wsgi. [1]: https://gitlab.com/mailman/mailman-suite Unfortunately, I was unable to log into the web interface; when I tried, I got a server error like this: > Exception Type: TypeError at /accounts/login/ > Exception Value: authenticate() takes exactly 0 arguments (3 given) Some research leads me to believe this is happening because authenticate() was changed in Django 1.10, and so I must be using a newer version of Django than the app expects. Given that I installed via Pip, I assumed the right version of Django would automatically be installed... I'm open to the possibility that I am misunderstanding how Pip works, or that postorius's and/or hyperkitty's dependency information is incorrect. The two alternatives I am weighing right now are: 1. Stay the course, and see if I can fix this by learning more about Python, Pip, Django and tinkering with the configuration. 2. Ride the bleeding edge, and install postorius and hyperkitty from git. (I'll probably stick with Mailman Core from Pip, since that seemed to work just fine.) Right now I'm leaning toward #2, because it means I'll be in a better position to patch things if I need to, and it seems like Mailman 3 is still rough enough that I will need to. Also, it looks like the master branches of both postorius and hyperkitty are now Python 3 compatible, which could save me from managing two different versions of Python. Which is the least crazy option? -- Ben

2 2

Log rotation
by Darren Smith April 11, 2018

April 11, 2018

Hey everyone, So I have a question about log rotation... Our mailman.log has grown to over 5 gigs. It's time to add this to log rotation. We added what we thought might work to the /etc/logrotate.d/mailman script, but when we ran it with a -f, we learned that the -f flag doesn't keep old logs. That in itself is fine - a normal scheduled log rotation won't have that problem. My problem is that doing the rotation caused the mailman not to be able to write to the log anymore. It appears that it no longer has a handle to the file. To overcome this with, say, nginx, there is a command in logrotate that you can add that restarts the service. I have found, however, that restarting the mailman service can be VERY problematic. There is so much going on that it takes a very long time to stop, and I have seen several instances where the service never shuts down cleanly - even after 3-4 minutes. The service thinks it is shut down, but there are several threads that haven't yet completed. If they are killed, then you have to go clean up the master.lck files etc. It seems like a bad way of doing things and a good way to somehow corrupt data. Anyway - after rambling... 1) Has anyone come up with a good log rotation strategy that doesn't necessitate a restart of the service? 2) Has anyone seen problems stopping and restarting the service? Is there a way to help with this problem? Thanks, Darren

3 5

"Approved:" header from mailman2 times
by Dmitry Makovey April 10, 2018

April 10, 2018

Hi, is there any equivalent to "Approved" header that was present in MM2 in MM3 land? Google is not very helpful in that. -- Sr System and DevOps Engineer SoM IRT

3 3

update_index
by Darren Smith April 3, 2018

April 3, 2018

Hello, If I'm reading the docs correctly, when we run manage.py update_index, it should be an incremental index of new emails that have been added since the last time update_index was run - can anyone confirm that this is the expected behavior? Or is there another command line option that I am missing? Right now we are indexing EVERYTHING every time that this is run. Probably this wouldn't be much of a problem except that we are importing all of our old archives (they go back to 1998 and comprise over 40.5 million emails) into the new system. As of now we have around 700,000 emails imported into hyperkitty, and since it is indexing everything it is taking around 1 hour and 10 minutes. Obviously we can't run that once a minute. Right now we're doing once a day, meaning that new emails won't be indexed until the next day. Fast forward to when we have all 40 million imported...the full index process will take (we estimate) around 4 days or so. So...can anyone help with how to get the update_index to do only emails added since the last time the update_index was run? Thanks! Darren

2 4

Mailman 3 with AWS auto scaling and potentially load balancing
by Chris McMacken March 30, 2018

March 30, 2018

After doing a lot of googling I can't seem to find solid answers to a couple of basic mailman hosting questions so I thought I would ask here. I'm looking to build an auto scaling group so that my mailman services can self heal if the EC2 instance goes away. What state if any is stored locally on the filesystem that would need to be backed up and restored when an instance is replaced? I'm also interested in a high availability deployment so I would like to do some basic load balancing to ensure that this requirement is met but I haven't been able to find much on this topic for mailman 3. Can someone point me in the direction of a write up on this problem or comment on it?

2 5

Re: Templates and docker-mailman
by Hathaway, John W. March 22, 2018

March 22, 2018

Hah, adding the extension did the trick. Should have inferred that. Thanks! John W. Hathaway | IT Director LOCKRIDGE GRINDAL NAUEN P.L.L.P. 100 Washington Avenue S | Suite 2200 | Minneapolis MN 55401 V: 612-339-6900 | F: 612-339-0981 | www.locklaw.com<http://www.locklaw.com/> This e-mail may contain information that is privileged, confidential or otherwise protected from disclosure. If you are not the intended recipient or otherwise have received this message in error, you are not authorized to read, print, retain, copy or disseminate this message or any part of it. If you are not the intended recipient or otherwise have received this message in error, please notify us immediately by e-mail, discard any paper copies and delete all electronic files of the message.

1 0

TypeError: authenticate() takes exactly 0 arguments (3 given)
by Bjoern Franke March 22, 2018

March 22, 2018

Hi, after migrating from a PIP install to Debian Backports packages, I get the following error: https://pastebin.com/tCnTuKYz The whole config of mailman3-suite: https://pastebin.com/nzJufYBN Regards Bjoern

2 4

Templates and docker-mailman
by jwhathaway＠locklaw.com March 20, 2018

March 20, 2018

I have mailman installed through docker-mailman and I'm trying to get rid of the footer decoration in our messages. Based on earlier threads, I have placed an empty file on the host running Docker at: /opt/mailman/core/var/templates/site/en/list:member:generic:footer But this is not being honored by the mailman container. I have restarted all of the containers. Is there something else I need to do?

3 3

Re: Getting rid of held messages from the command line
by Mark Sapiro March 19, 2018

March 19, 2018

On 03/19/2018 02:22 PM, Aymeric Mansoux wrote: > > Ah, so if I understand you correctly, as long as I'm on 3.1.1, I could > run into this issue again, but then: Yes, this issue will recur with Mailman 3.1.1 and a MySQL database. > - Would patching 3.1.1 with 5477a201 be enough to prevent further issues > until the next stable is released? I think so. The only potential issue is if mailman/database/alembic/versions/4bd95c99b2e7_fix_template_password.py is not in 3.1.1. I think it is, so I think it's OK, but if not, you'd need to modify mailman/database/alembic/versions/3f31035ed0d7_further_increase_pendedkeyvalue_value_.py to point to the 3.1.1 head of the alembic versions. > - How can I clean the current pendedkeyvalue table? With phpMyAdmin or the mysql command. I think you can just delete those entries from the pendedkeyvalue table. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

1 0

Getting rid of held messages from the command line
by Aymeric Mansoux March 17, 2018

March 17, 2018

Hello, We're currently running some of Mailman software, as available via pip, namely: - mailman 3.1.1 (pip3) - postorius 1.1.2 (pip2) - hyperkitty 1.1.4 (pip2) - mailmanclient 3.1.1 (pip3) So far so good, however, for some reasons, a couple of our lists have started to accumulate held messages that cannot be manipulated via the REST API. Regardless if we use the web interface or mailmanclient, it ends up with: Mar 14 10:58:32 2018 (24287) REST request handler error: Traceback (most recent call last): File "/usr/lib/python3.5/wsgiref/handlers.py", line 137, in run self.result = application(self.environ, self.start_response) File "/usr/local/lib/python3.5/dist-packages/mailman/database/transaction.py", line 50, in wrapper rtn = function(*args, **kws) File "/usr/local/lib/python3.5/dist-packages/mailman/rest/wsgiapp.py", line 214, in __call__ return super().__call__(environ, start_response) File "/usr/local/lib/python3.5/dist-packages/falcon/api.py", line 244, in __call__ responder(req, resp, **params) File "/usr/local/lib/python3.5/dist-packages/mailman/rest/post_moderation.py", line 167, in on_get resource = self._make_collection(request) File "/usr/local/lib/python3.5/dist-packages/mailman/rest/helpers.py", line 159, in _make_collection for resource in collection] File "/usr/local/lib/python3.5/dist-packages/mailman/rest/helpers.py", line 159, in <listcomp> for resource in collection] File "/usr/local/lib/python3.5/dist-packages/mailman/rest/post_moderation.py", line 157, in _resource_as_dict resource = self._make_resource(request.id) File "/usr/local/lib/python3.5/dist-packages/mailman/rest/post_moderation.py", line 70, in _make_resource resource = super()._make_resource(request_id) File "/usr/local/lib/python3.5/dist-packages/mailman/rest/post_moderation.py", line 39, in _make_resource results = requests.get_request(request_id) File "/usr/local/lib/python3.5/dist-packages/mailman/database/transaction.py", line 85, in wrapper return function(args[0], config.db.store, *args[1:], **kws) File "/usr/local/lib/python3.5/dist-packages/mailman/model/requests.py", line 120, in get_request result.data_hash, expunge=False) File "/usr/local/lib/python3.5/dist-packages/mailman/database/transaction.py", line 85, in wrapper return function(args[0], config.db.store, *args[1:], **kws) File "/usr/local/lib/python3.5/dist-packages/mailman/model/pending.py", line 138, in confirm value = json.loads(keyvalue.value) File "/usr/lib/python3.5/json/__init__.py", line 319, in loads return _default_decoder.decode(s) File "/usr/lib/python3.5/json/decoder.py", line 339, in decode obj, end = self.raw_decode(s, idx=_w(s, 0).end()) File "/usr/lib/python3.5/json/decoder.py", line 355, in raw_decode obj, end = self.scan_once(s, idx) json.decoder.JSONDecodeError: Unterminated string starting at: line 1 column 1 (char 0) Mar 14 10:58:32 2018 (24287) 127.0.0.1 - - "GET /3.1/lists/xx(a)xx.xx/held HTTP/1.1" 500 59 Is there a way to manipulate/see/remove these mails differently? Right now this prevent moderation of any held messages (note: some lists do not suffer from this and the held panel or mailmanclient works perfectly fine). Thanks!

3 4

disable sign-ups
by Peter Münster March 14, 2018

March 14, 2018

Hi, I would like to add new accounts only manually, the mailman3 site should not be open for sign-ups. So I've added this code to settings.py: --8<---------------cut here---------------start------------->8--- from allauth.account.adapter import DefaultAccountAdapter class MyAccountAdapter(DefaultAccountAdapter): def is_open_for_signup(self, request): return False ACCOUNT_ADAPTER = 'MyAccountAdapter' --8<---------------cut here---------------end--------------->8--- It seems to work, but the user experience is not optimal: the user can click on "Sign Up", and then gets to "Server Error (500)". This is the log: --8<---------------cut here---------------start------------->8--- ERROR 2018-01-31 21:53:47,116 6769 django.request Internal Server Error: /accounts/signup/ Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/django/core/handlers/base.py", line 132, in get_response response = wrapped_callback(request, *callback_args, **callback_kwargs) File "/usr/lib/python2.7/site-packages/django/views/generic/base.py", line 71, in view return self.dispatch(request, *args, **kwargs) File "/usr/lib/python2.7/site-packages/django/utils/decorators.py", line 34, in _wrapper return bound_func(*args, **kwargs) File "/usr/lib/python2.7/site-packages/django/views/decorators/debug.py", line 76, in sensitive_post_parameters_wrapper return view(request, *args, **kwargs) File "/usr/lib/python2.7/site-packages/django/utils/decorators.py", line 30, in bound_func return func.__get__(self, type(self))(*args2, **kwargs2) File "/usr/lib/python2.7/site-packages/django_allauth-0.34.0-py2.7.egg/allauth/account/views.py", line 210, in dispatch return super(SignupView, self).dispatch(request, *args, **kwargs) File "/usr/lib/python2.7/site-packages/django_allauth-0.34.0-py2.7.egg/allauth/account/views.py", line 79, in dispatch **kwargs) File "/usr/lib/python2.7/site-packages/django_allauth-0.34.0-py2.7.egg/allauth/account/views.py", line 182, in dispatch if not self.is_open(): File "/usr/lib/python2.7/site-packages/django_allauth-0.34.0-py2.7.egg/allauth/account/views.py", line 191, in is_open return get_adapter(self.request).is_open_for_signup(self.request) File "/usr/lib/python2.7/site-packages/django_allauth-0.34.0-py2.7.egg/allauth/account/adapter.py", line 501, in get_adapter return import_attribute(app_settings.ADAPTER)(request) File "/usr/lib/python2.7/site-packages/django_allauth-0.34.0-py2.7.egg/allauth/utils.py", line 150, in import_attribute pkg, attr = path.rsplit('.', 1) ValueError: need more than 1 value to unpack ERROR 2018-01-31 21:53:47,116 6769 django.request Internal Server Error: /accounts/signup/ Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/django/core/handlers/base.py", line 132, in get_response response = wrapped_callback(request, *callback_args, **callback_kwargs) File "/usr/lib/python2.7/site-packages/django/views/generic/base.py", line 71, in view return self.dispatch(request, *args, **kwargs) File "/usr/lib/python2.7/site-packages/django/utils/decorators.py", line 34, in _wrapper return bound_func(*args, **kwargs) File "/usr/lib/python2.7/site-packages/django/views/decorators/debug.py", line 76, in sensitive_post_parameters_wrapper return view(request, *args, **kwargs) File "/usr/lib/python2.7/site-packages/django/utils/decorators.py", line 30, in bound_func return func.__get__(self, type(self))(*args2, **kwargs2) File "/usr/lib/python2.7/site-packages/django_allauth-0.34.0-py2.7.egg/allauth/account/views.py", line 210, in dispatch return super(SignupView, self).dispatch(request, *args, **kwargs) File "/usr/lib/python2.7/site-packages/django_allauth-0.34.0-py2.7.egg/allauth/account/views.py", line 79, in dispatch **kwargs) File "/usr/lib/python2.7/site-packages/django_allauth-0.34.0-py2.7.egg/allauth/account/views.py", line 182, in dispatch if not self.is_open(): File "/usr/lib/python2.7/site-packages/django_allauth-0.34.0-py2.7.egg/allauth/account/views.py", line 191, in is_open return get_adapter(self.request).is_open_for_signup(self.request) File "/usr/lib/python2.7/site-packages/django_allauth-0.34.0-py2.7.egg/allauth/account/adapter.py", line 501, in get_adapter return import_attribute(app_settings.ADAPTER)(request) File "/usr/lib/python2.7/site-packages/django_allauth-0.34.0-py2.7.egg/allauth/utils.py", line 150, in import_attribute pkg, attr = path.rsplit('.', 1) ValueError: need more than 1 value to unpack --8<---------------cut here---------------end--------------->8--- Do you have any hints, how to avoid such errors please? TIA for any help, -- Peter

3 2

Internal Server Error: /hyperkitty/api/mailman/archive: ValueError: A string literal cannot contain NUL (0x00) characters.
by Henrik Rasmussen March 14, 2018

March 14, 2018

This could potentially be associated with [1] and [2], but it does not regard import21. When mails are released or otherwise archived I get an Internal Server Error regarding "ValueError: A string literal cannot contain NUL (0x00) characters." in the web/mailmanweb.log, but unlike importing corrupted archives, this is mails coming from the users in the daily life. Would it be possible for Mailman to check for NUL characters and skip those before archiving? ERROR 2018-03-13 10:38:12,602 39 django.request Internal Server Error: /hyperkitty/api/mailman/archive Traceback (most recent call last): File "/usr/local/lib/python2.7/site-packages/django/core/handlers/exception.py", line 39, in inner response = get_response(request) File "/usr/local/lib/python2.7/site-packages/django/core/handlers/base.py", line 249, in _legacy_get_response response = self._get_response(request) File "/usr/local/lib/python2.7/site-packages/django/core/handlers/base.py", line 187, in _get_response response = self.process_exception_by_middleware(e, request) File "/usr/local/lib/python2.7/site-packages/django/core/handlers/base.py", line 185, in _get_response response = wrapped_callback(request, *callback_args, **callback_kwargs) File "/usr/local/lib/python2.7/site-packages/hyperkitty/views/mailman.py", line 68, in _decorator return func(request, *args, **kwargs) File "/usr/local/lib/python2.7/site-packages/django/views/decorators/csrf.py", line 58, in wrapped_view return view_func(*args, **kwargs) File "/usr/local/lib/python2.7/site-packages/hyperkitty/views/mailman.py", line 114, in archive add_to_list(mlist_fqdn, msg) File "/usr/local/lib/python2.7/site-packages/hyperkitty/lib/incoming.py", line 149, in add_to_list email.save() File "/usr/local/lib/python2.7/site-packages/django/db/models/base.py", line 796, in save force_update=force_update, update_fields=update_fields) File "/usr/local/lib/python2.7/site-packages/django/db/models/base.py", line 824, in save_base updated = self._save_table(raw, cls, force_insert, force_update, using, update_fields) File "/usr/local/lib/python2.7/site-packages/django/db/models/base.py", line 908, in _save_table result = self._do_insert(cls._base_manager, using, fields, update_pk, raw) File "/usr/local/lib/python2.7/site-packages/django/db/models/base.py", line 947, in _do_insert using=using, raw=raw) File "/usr/local/lib/python2.7/site-packages/django/db/models/manager.py", line 85, in manager_method return getattr(self.get_queryset(), name)(*args, **kwargs) File "/usr/local/lib/python2.7/site-packages/django/db/models/query.py", line 1043, in _insert return query.get_compiler(using=using).execute_sql(return_id) File "/usr/local/lib/python2.7/site-packages/django/db/models/sql/compiler.py", line 1054, in execute_sql cursor.execute(sql, params) File "/usr/local/lib/python2.7/site-packages/django/db/backends/utils.py", line 64, in execute return self.cursor.execute(sql, params) ValueError: A string literal cannot contain NUL (0x00) characters. [1] https://gitlab.com/mailman/hyperkitty/issues/155 [2] https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/….

1 1

A short link to this page -- TinyURL
by John Griessen March 14, 2018

March 14, 2018

The wiki page has a convenient TinyURL. Is it feasible to make TinyURLs for archived list threads such as: https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/…

3 2

Database running VERY hot
by Darren Smith March 12, 2018

March 12, 2018

Hello all, We had an old installation of Mailman 2.1 across three servers with over 32,000 mailing lists on them. Due to circumstances beyond my control, we had to shut them down and quickly set up Mailman 3 on a new server. We have Mailman3 set up on a single server this time, as we were having problems with a 3-server setup and Hyperkitty and archives. Long story short, it is up and running, and our users are starting to come back. However, we do not have very many users hitting Postorius and Hyperkitty yet, and we are seeing a distressing number of 504 gateway timeouts. We noticed that there is a significant number of queries to the API whenever hitting Postorius's front page to load the mailing lists, and then on every load. It looks as if it makes a single call to the API to get information about a single list, and does this 10 times - once for each list - to render the page. This gets much worse when users set the view to 200 per page, as they are inclined to do with 32,000 mailing lists... What we've done, actually, is to override the front page and point the users to a different set of static pages where we have all of our lists categorized and searchable, and when they find the list they are looking for, we have a link back to postorius. It has taken a lot of the stress off of the server. However, I still see where the database at times can run VERY hot. We have set up this server to run with PostgreSQL. When I do a ps aux | grep postgres, I find a lot of processes that have been spawned to take care of mailman - a dozen or so. However, one of the threads is taking up about 85% of the load, another thread about 14%, and little dribbles here and there from the rest of the threads. Here are the questions: 1) Has anyone run into problems like these? I would think that maybe this is an issue having so many mailing lists, but honestly there aren't that many people using the system yet. It is going to ramp up as the users realize that we are live again, but we aren't getting that much traffic. 2) Is there any configuration that I can set, especially with regards to the database, so that it can be used more efficiently and not throttle through one or two threads? Please let me know what further information I can provide. Thanks in advance for any help or advice! Silas

5 11