April 2024 - Mailman-users - lists.mailman3.org

Find a smtp server to send out emails
by Leon March 12, 2025

March 12, 2025

Hi, This problem is not caused by mailman, but I still want to give it a shot here. I'm hosting a mailing list on top of mailman3. Emails are supposed to be sent out by AWS ses. However, ses requires that sender address must be verified, which leads to a problem that emails sent by subscribers to mailing list cannot be sent to other subcirbers, since their addresses are not verified. And it is impossible to verified every subscriber. Are there smtp service providers allowing unverified email address to send out emails, or do I have other solutions? Thanks. -- Best wishes, Leon

4 3

Moderation of held emails vs. spam
by David Krantz March 11, 2025

March 11, 2025

Hi, I now run Mailman 3.3.1, installed from pip. Is there now any way to prevent Mailman from forwarding the contents of the held message when notifying moderators of held messages? In my case these messages often are spam messages and if the entire contents are forwarded it triggers spam handling in the recipient address(es) which over time risks classifying all moderation emails as spam or even classifying the list domain or server as a spam source. Even my own outgoing filter classifies it as spam, which I will fix. I currently run rspamd for spam filtering, graylisting and DKIM and ARC verification/signing. Someone on this recommended it, thank you for that as it removes the need for other milters. I guess that this would be a simple change to make as a kludge but a proper implementation as a setting would be a lot better. I'd like it as a global setting but that might be too coarse. Cheers // David

3 4

Issues with a DMARC record leading to message being shunted
by Ralf Hildebrandt March 4, 2025

March 4, 2025

Hi! Recently a mail was not being distributed via our MM3 instance; I searched the logs and found: Dec 22 04:54:27 2023 (24) ACCEPT: <1d431542-b386-467b-8bf2-305f19ee7eb4(a)somenet.org> Dec 22 04:54:28 2023 (28) Uncaught runner exception: list index out of range Dec 22 04:54:28 2023 (28) Traceback (most recent call last): File "/usr/lib/python3.10/site-packages/mailman/core/runner.py", line 179, in _one_iteration self._process_one_file(msg, msgdata) File "/usr/lib/python3.10/site-packages/mailman/core/runner.py", line 272, in _process_one_file keepqueued = self._dispose(mlist, msg, msgdata) File "/usr/lib/python3.10/site-packages/mailman/runners/pipeline.py", line 37, in _dispose process(mlist, msg, msgdata, pipeline) File "/usr/lib/python3.10/site-packages/mailman/core/pipelines.py", line 53, in process handler.process(mlist, msg, msgdata) File "/usr/lib/python3.10/site-packages/mailman/handlers/validate_authenticity.py", line 125, in process authenticate(msg, msgdata) File "/usr/lib/python3.10/site-packages/mailman/utilities/retry.py", line 44, in f_retry return f(*args, **kwargs) File "/usr/lib/python3.10/site-packages/mailman/handlers/validate_authenticity.py", line 93, in authenticate auth_result = authenticate_message( File "/usr/lib/python3.10/site-packages/authheaders/__init__.py", line 395, in authenticate_message dmarc_result = check_dmarc(msg, spf_result, dkim_result, dnsfunc=dnsfunc, psddmarc=psddmarc) File "/usr/lib/python3.10/site-packages/authheaders/__init__.py", line 343, in check_dmarc result, result_comment, from_domain, policy = dmarc_per_from(from_domain, spf_result, dkim_result, dnsfunc, psddmarc) File "/usr/lib/python3.10/site-packages/authheaders/__init__.py", line 90, in dmarc_per_from record, orgdomain = receiver_record(from_domain) File "/usr/lib/python3.10/site-packages/authheaders/dmarc_lookup.py", line 117, in receiver_record retval = lookup_receiver_record(hostSansDmarc, dnsfunc) File "/usr/lib/python3.10/site-packages/authheaders/dmarc_lookup.py", line 92, in lookup_receiver_record tags = answer_to_dict(str(result)) File "/usr/lib/python3.10/site-packages/authheaders/dmarc_lookup.py", line 42, in answer_to_dict retval = {t[0].strip().lower(): t[1].strip().lower() for t in rawTags} File "/usr/lib/python3.10/site-packages/authheaders/dmarc_lookup.py", line 42, in <dictcomp> retval = {t[0].strip().lower(): t[1].strip().lower() for t in rawTags} IndexError: list index out of range Dec 22 04:54:28 2023 (28) SHUNTING: 1703220868.1418982+b27f5db154375fcd2c418d467172e4aad0d3d57a So the message has been shunted, due to this error. Something with DMARC and tags. So I checked the DMARC record for the sending domain somenet.org. It is "v=DMARC1;p=none;pct=100;rua=mailto:postmaster@somenet.org;mailto:postmaster@somenet.org;ri=3600;fo=1;" which is syntactically incorrect. The extra ";mailto:postmaster@somenet.org" is wrong, I guess the tag "ruf=" is missing here! It should probably read "v=DMARC1;p=none;pct=100;rua=mailto:postmaster@somenet.org;ruf=mailto:postmaster@somenet.org;ri=3600;fo=1;" So, should mm3 somehow "catch" this error somehow? According to the DMARC specs, an syntactically incorrect DMARC record should be ignored / handled as if none were present. -- Ralf Hildebrandt Charité - Universitätsmedizin Berlin Geschäftsbereich IT | Abteilung Netz | Netzwerk-Administration Invalidenstraße 120/121 | D-10115 Berlin Tel. +49 30 450 570 155 ralf.hildebrandt(a)charite.de https://www.charite.de

5 12

How To Install Mailman 3 on Debian 10 (Complete Guide)
by Brian Carpenter Feb. 25, 2025

Feb. 25, 2025

I have finished my how-to install Mailman 3 on Debian 10 completed to the point where you can use it to get a fully functional Mailman 3 environment up and running. This is a comprehensive guide that walks you through installing EVERYTHING (currently!) that Mailman 3 needs to run. It also makes updating Mailman 3/Postorius/Hyperkitty very easy. I have not added the update directions yet but will very soon. I also plan on adding a section on setting up DKIM and Xapian with Mailman 3. I hope this helps those who wish to get a Mailman 3 server up and running quickly and brings a sense of sanity to the confusion regarding the various documentation out there concerning the installation of Mailman 3/Postorius/Hyperkitty. I intend to add a How-to for Ubuntu 20 at some point. Without further ado: https://wiki.list.org/DOC/Howto_Install_Mailman3_On_Debian10 I am sure the above guide can use improvements. Feel free to contact me off-list to point out mistakes/improvements, etc. -- Brian Carpenter Harmonylists.com Emwd.com

13 38

How to remove Held Unsubscriptions
by Mark Jan. 6, 2025

Jan. 6, 2025

Hi As a moderator I receive an email each day for "Held Unsubscriptions" for a subscriber that was unsubscribed by the Owner sometime ago (using "Mass operations"). +++++++++++++++++++++++++++++++ The listname(a)domain.com list has 1 moderation requests waiting. Held Unsubscriptions: User: bart(a)example.com Please attend to this at your earliest convenience. +++++++++++++++++++++++++++++++ There is nothing showing under "Subscription requests > Pending approval". Could anyone tell me how I can stop these email notifications? I have access to the mailman shell and the databases. Thanks, Mark

4 7

Cache mailman3
by pau.baiges＠csuc.cat Dec. 22, 2024

Dec. 22, 2024

Is there a way to delete the mailman3 cache? It's because it gives us this error and we think it's because of the cache. Internal Server Error: /mailman3/accounts/login/ TemplateDoesNotExist at /accounts/login/ django_saml2_auth/error.html Request Method: GET Request URL: http://llistes.csuc.cat/mailman3/accounts/login/?next=/mailman3/postorius/l… Django Version: 2.2.12 Python Executable: /usr/bin/uwsgi-core Python Version: 3.8.10 Python Path: ['.', '', '/usr/lib/python38.zip', '/usr/lib/python3.8', '/usr/lib/python3.8/lib-dynload', '/usr/local/lib/python3.8/dist-packages', '/usr/lib/python3/dist-packages'] Server time: dv., 15 Març 2024 10:33:00 +0100 Installed Applications: ('hyperkitty', 'postorius', 'django_mailman3', 'django.contrib.admin', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.staticfiles', 'rest_framework', 'django_gravatar', 'compressor', 'haystack', 'django_extensions', 'django_q', 'allauth', 'allauth.account', 'allauth.socialaccount', 'django_mailman3.lib.auth.fedora') Installed Middleware: ('django.contrib.sessions.middleware.SessionMiddleware', 'django.middleware.common.CommonMiddleware', 'django.middleware.csrf.CsrfViewMiddleware', 'django.middleware.locale.LocaleMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', 'django.contrib.messages.middleware.MessageMiddleware', 'django.middleware.clickjacking.XFrameOptionsMiddleware', 'django.middleware.security.SecurityMiddleware', 'django_mailman3.middleware.TimezoneMiddleware', 'postorius.middleware.PostoriusMiddleware') Template loader postmortem Django tried loading these templates, in this order: Using engine django: This engine did not provide a list of tried templates. Traceback: File "/usr/local/lib/python3.8/dist-packages/django_saml2_auth/utils.py" in wrapper 179. result = function(request) File "/usr/local/lib/python3.8/dist-packages/django_saml2_auth/views.py" in signin 271. saml_client = get_saml_client(get_assertion_url(request), acs) File "/usr/local/lib/python3.8/dist-packages/django_saml2_auth/saml.py" in get_saml_client 169. metadata = get_metadata(user_id) File "/usr/local/lib/python3.8/dist-packages/django_saml2_auth/saml.py" in get_metadata 131. raise SAMLAuthError("Invalid metadata URL.", extra={ During handling of the above exception (Invalid metadata URL.), another exception occurred: File "/usr/lib/python3/dist-packages/django/core/handlers/exception.py" in inner 34. response = get_response(request) File "/usr/lib/python3/dist-packages/django/core/handlers/base.py" in _get_response 115. response = self.process_exception_by_middleware(e, request) File "/usr/lib/python3/dist-packages/django/core/handlers/base.py" in _get_response 113. response = wrapped_callback(request, *callback_args, **callback_kwargs) File "/usr/local/lib/python3.8/dist-packages/django_saml2_auth/utils.py" in wrapper 181. result = handle_exception(exc, request) File "/usr/local/lib/python3.8/dist-packages/django_saml2_auth/utils.py" in handle_exception 162. return render(request, File "/usr/lib/python3/dist-packages/django/shortcuts.py" in render 36. content = loader.render_to_string(template_name, context, request, using=using) File "/usr/lib/python3/dist-packages/django/template/loader.py" in render_to_string 61. template = get_template(template_name, using=using) File "/usr/lib/python3/dist-packages/django/template/loader.py" in get_template 19. raise TemplateDoesNotExist(template_name, chain=chain) Exception Type: TemplateDoesNotExist at /accounts/login/ Exception Value: django_saml2_auth/error.html Request information: USER: AnonymousUser

3 2

Re: mail stuck in "out" queue
by Dmitry Makovey Dec. 18, 2024

Dec. 18, 2024

So our mailman got stuck again, but I did follow your advise. Here's what I've found: On 3/29/19 2:58 PM, Mark Sapiro wrote: > On 3/29/19 2:28 PM, Dmitry Makovey wrote: >> I've had encountered this situation now twice: mail is being stuck in >> "out" queue and nothing in the logs indicates the issue. Is there a way >> to ask mailman-core politely to attempt delivery (perhaps with increased >> debugging in the logs) *without* restarting the core (which does solve >> *this* problem but creates other problems, like availability of the >> mailman as a whole) > > > Is the "out" runner running? yes: # docker top mailman-core | grep -F out: 100 21681 13215 0 Mar28 ? 01:14:16 /usr/local/bin/python /usr/local/bin/runner --runner=out:0:1 -C /etc/mailman.cfg > ps -fwwA |grep runner=out > > If not, you should be able to start it as the Mailman user with a > command like > > /path/to/python3 /path/to/mailman/bin/runner -C /path/to/mailman.cfg > --runner=out:0:1 > > See 'ps -fwwA|grep runner' for examples > > If the out runner is running, is there a file named *.bak along with all > the *.pck files in queue/out/ there is one, yes: # ls -l /srv/mail/mailman/core/var/queue/out/*.bak -rw-rw---- 1 100 65533 21512 Apr 14 19:45 /srv/mail/mailman/core/var/queue/out/1555296331.8386078+2c905825b82708e5a682b872b0aff320c9dd0b2e.bak what does it indicate and what should my steps be to resolve this (other than restarting queues)? > And if it's not, is there anything in Mailman's logs to indicate why it > died? > > Also, 'mailman restart' should only take a matter of seconds, but if the > out runner is running but not processing its queue, I think sending it a > SIGINT should restart it. SIGINT killed the process allright, but it didn't auto-respawn. I ended up spawning it with: /usr/local/bin/python /usr/local/bin/runner --runner=out:0:1 -C /etc/mailman.cfg but soon realized it doesn't go to background nicely so I've nohup'ed it in the end. but it did solve my problem. -- Sr System and DevOps Engineer SoM IRT

6 17

How to Increase outgoing mail volume for Mailman 3
by Brian Carpenter Dec. 9, 2024

Dec. 9, 2024

Hello everyone, We had a new client come on board that brought a list that had the largest out-going mail volume that I have ever dealt with. So I did what any sane server administrator would do that is running Mailman 3: I ran to Mark Sapiro for help! Here is what the Sage of all things Mailman counseled me to do: 1. Disabled VERP delivery. VERP can help improve mail delivery by delivering 1 message per SMTP transaction (I think I got that right). Using VERP is counter-productive as it can seriously delay outgoing mail delivery for a high-volume list. So you can use something like the following in the MTA section of your mailman.cfg: [mta] verp_confirmations: no verp_personalized_deliveries: no verp_delivery_interval: 0 2. I configured Mailman 3 to run 4 outgoing runners. The default is 1. This action was the game changer. It allows Mailman to handle 4 incoming messages at a time instead of 1. My client's incoming list volume was high enough where it was overwhelming the single outgoing runner. Here is what I added to the mailman.cfg file: [runner.out] instances: 4 Doing this step immediately solved the backlog in var/queue/out. 3. If you start up with a new server for a list that is high volume then keep an eye out for Proofpoint and Vade Security as they will block your new IP address quicker than Mark Sapiro can say "This is a bug. See <some Gitlab.com url>" Mark, thank you! -- Brian Carpenter Harmonylists.com Emwd.com

5 10

Aborted connection message in log in every 5 minutes
by zoltan＠circle-interactive.co.uk Dec. 3, 2024

Dec. 3, 2024

Hi Everyone, we have mailman 3.3.8 venv test installation which in general works fine however our mysql error log is filled up with messages below because they are so frequent. 2023-02-24 0:31:30 199567 [Warning] Aborted connection 199567 to db: 'mailman' user: 'mailman' host: 'localhost' (Got an error reading communication packets) 2023-02-24 0:36:30 201063 [Warning] Aborted connection 201063 to db: 'mailman' user: 'mailman' host: 'localhost' (Got an error reading communication packets) 2023-02-24 0:41:31 202559 [Warning] Aborted connection 202559 to db: 'mailman' user: 'mailman' host: 'localhost' (Got an error reading communication packets) 2023-02-24 0:46:31 204056 [Warning] Aborted connection 204056 to db: 'mailman' user: 'mailman' host: 'localhost' (Got an error reading communication packets) As suggested here https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… I tried to correlate with error logs and /opt/mailman/web/logs/mailmanweb.log shows some hyperkitty.lib.utils Failed to update the fulltext index: (2002, "Can't connect to local MySQL server through socket '/run/mysqld/mysqld.sock' (111)" /opt/mailman/web/logs/uwsgi-error.log Message: OperationalError(2013, "Lost connection to MySQL server at 'handshake: reading initial communication packet', sy stem error: 104") but they have not such frequency so unsure if they are related. Thanks for the suggestions

6 16

Backup and restore a single list
by sherin＠raidm.com Nov. 6, 2024

Nov. 6, 2024

Hello, I am new to mailman3 . I am looking for the procedure to backup and restore a single mailing list from mailman3. If any one know the procedure or the documentation , please point me

3 7

Logging subscribes/unsubscribes
by Brian Carpenter Oct. 22, 2024

Oct. 22, 2024

Does Mailman 3 log subscribes and unsubscribes for each list the way Mailman 2 did? Brian

5 7

Questions regarding message acceptance
by Pawel Grzywaczewski Sept. 19, 2024

Sept. 19, 2024

Hello, I have few questions regarding usage of Mailman3: 1) We have list1 and list2 with members. Can we specify that all members of list1 can post messages to list2? We could potentially write a script that would synchronize members of another list to “Accept these non-members” of another list, but with thousands of lists it will be difficult to maintain lists in synchro. So perhaps there is a concept of adding another list to “Accept these non-members” and mailman real-time evaluate membership of another list upon message arrival? 2) In explanation of “Accept these non-members” it’s written: “While non-regexp addresses can be entered here, it is preferred to add the address as a nonmember and set the nonmember's Moderation to Default Processing”. I noticed that if someone posts to a list then he is added automatically to non-members. Which means that next time he will be able to post. My understanding is that it’s better to use the feature “Accept these non-members”. Am I correct? Thank you, Paweł

5 7

Disabled by bounce
by Allan Hansen Sept. 11, 2024

Sept. 11, 2024

Hi all, Apparently Google just started to get very aggressive about DKIM settings. Some hundreds of my subscribers have had their subscriptions disabled because of Google's bounces. I tried to 'Enable' some of them, expecting that their bounce scores would be reset, but when I list the users, the bounce scores are still 5. Please advise. Will enabling them without the bounce score being reset just cause the server to disable them again. Yours, Allan

10 19

Display the last post time for a list or all lists.
by Henrik Rasmussen Aug. 9, 2024

Aug. 9, 2024

Does Mailman 3 have something similar to https://www.msapiro.net/scripts/last_post.py displaying the last post time for a list or all lists?

3 4

MM3 generates long lines?
by peter＠chubb.wattle.id.au July 28, 2024

July 28, 2024

I'm seeing emails being dropped when mm3 talks to the local smtp server, with log errors like: 2021-06-23 15:42:24 1lvvea-007r8u-VN H=localhost (<FQDN>) [::1] F=<announce-bounces@<FQDN>> rejected after DATA: maximum allowed line length is 998 octets, got 1036 The email itself did not have such long lines AFAICT. I can disable line length checking on the mailserver, but that sounds like a recipe for the next one along to drop the email. Peter C

4 8

Digests not working correctly
by Joel Lord June 8, 2024

June 8, 2024

So I seem to have problems with both periodic AND size-triggered digests. Size first, this is simpler. Just got one sent out, clearly triggered by a new email getting added to the queued up messages, but the setting for the list is the default 30KB and the digest came out at 23.2 KB. Is it measuring the accumulated queue as size on disk including metadata and filesystem block sizes or something, rather than the size of what the emailed digest will be? Periodic is much more complicated, even to explain. I have the cron job running nightly at 11:00 PM and it certainly seems to be working, except for one really odd thing. The list also definitely has periodic digests enabled in the web UI. This is a very bursty list, so it will go mad with traffic for a few weeks and then will go mostly idle for a month or so. The first digest of a burst is definitely size-triggered, but pretty reliably it has the last few messages from the previous burst in there. So the one I got today had three messages from today and one message from May 4th. But that May 4th message should have gone out at 11:00 PM on May 4th with the daily digest and then gotten flushed from the pending digest queue, right? -- Joel Lord

3 14

Change Dmark settings via command line
by bob B May 8, 2024

May 8, 2024

I need to set all the DMARC settings on are lists to "replace from with list address". Is there an easy want to do this via cli? I could do it by viewing the web interface but we have a lot of lists.

4 9

Welcome message template errors
by Mark May 1, 2024

May 1, 2024

Hi All I'm getting errors when a custom "Welcome message" template is in place [list:user:notice:welcome]. Case: Subscribing a new user via the admin "Mass subscribe". Although the new user is successfully subscribed, a welcome message is not sent and the following error message displays on the webpage. === HTTP Error 400: HTTPConnectionPool(host='localhost', port=8000): Read timed out. (read timeout=5) === And the site-owner receives an email with ... ==== Internal Server Error: /mailman3/lists/ DoesNotExist at /mailman3/lists/ Site matching query does not exist. Request Method: GET Request URL: http://<REDACTED-PUBLIC-IPv4-ADDRESS>/mailman3/lists/ Django Version: 4.2.11 Python Executable: /opt/mailman/venv/bin/python3 Python Version: 3.11.2 ... etc ... === Regarding the second line in the email - my thinking is that it should be looking in "/opt/mailman/mm/var/lists" and not "/mailman3/lists/". If that's right, where would I look to change that directive? If not, any other clues would be greatly appreciated. The error doesn't occur if the is no custom "Welcome message" template - ie. the user is sent the default welcome message. $ mailman info GNU Mailman 3.3.9 (Tom Sawyer) Python 3.11.2 (main, Mar 13 2023, 12:18:29) [GCC 12.2.0] config file: /etc/mailman3/mailman.cfg REST root url: http://localhost:8001/3.1/

2 29

Re: [MM3-users off list] Re: Welcome message template errors
by Mark April 29, 2024

April 29, 2024

>> So, I'm thinking (in broad brush strokes) that if I'm stuck with this >> "http glitch" I could write a script to: >> >> 1. extract the text of the custom message from the database, >> 2. write that message text to a file >> 3. update the templates.uri entries to replace the >> http://localhost... with file:///path/to/file >> 4. cron the script to run every few minutes. >> >> It screams of utter clunk I know... > but it would work. > > Note that this may not be as big an issue as it seems. It doesn't > affect all templates, for example list:member:digest:footer, > list:member:digest:header, list:member:digest:masthead, > list:member:regular:footer, list:member:regular:header and > list:member:generic:footer are only used by the `out` runner when > sending messages, so these aren't affected. Right. Affected are all the "list:user:notice:***" (eg. goodbye, hold, reject,...) > > I'm still trying to determine what the issue is. To this end can you > tell me what Python version your Mailman uses and what is the output > from `pip freeze` with your venv active? $ mailman info GNU Mailman 3.3.9 (Tom Sawyer) Python 3.11.2 (main, Mar 13 2023, 12:18:29) [GCC 12.2.0] $ pip freeze aiosmtpd==1.4.4.post2 alembic==1.13.1 arrow==1.3.0 asgiref==3.7.2 atpublic==4.0 attrs==23.2.0 authheaders==0.16.2 authres==1.2.0 blessed==1.20.0 certifi==2023.11.17 cffi==1.16.0 charset-normalizer==3.3.2 click==8.1.7 cmarkgfm==2024.1.14 cryptography==42.0.1 defusedxml==0.7.1 Django==4.2.11 django-allauth==0.60.1 django-appconf==1.0.6 django-compressor==4.4 django-extensions==3.2.3 django-gravatar2==1.4.4 django-haystack==3.2.1 django-mailman3==1.3.12 django-picklefield==3.1 django-q==1.3.9 djangorestframework==3.14.0 dkimpy==1.1.5 dnspython==2.5.0 docutils==0.20.1 falcon==3.1.3 filelock==3.13.1 flufl.bounce==4.0 flufl.i18n==5.0.2 flufl.lock==8.0.2 greenlet==3.0.3 gunicorn==21.2.0 HyperKitty==1.3.9 idna==3.6 lazr.config==3.0 lazr.delegates==2.1.0 mailman==3.3.9 mailman-hyperkitty==1.2.1 mailman-web==0.0.9 mailmanclient==3.3.5 Mako==1.3.0 MarkupSafe==2.1.4 mistune==3.0.2 networkx==3.2.1 nh3==0.2.15 oauthlib==3.2.2 packaging==23.2 passlib==1.7.4 postorius==1.3.10 psutil==5.9.8 psycopg2-binary==2.9.9 publicsuffix2==2.20191221 pycparser==2.21 Pygments==2.17.2 PyJWT==2.8.0 python-dateutil==2.8.2 python3-openid==3.2.0 pytz==2023.3.post1 rcssmin==1.1.1 readme-renderer==42.0 redis==3.5.3 requests==2.31.0 requests-oauthlib==1.3.1 rjsmin==1.2.1 robot-detection==0.4 six==1.16.0 SQLAlchemy==2.0.25 sqlparse==0.4.4 types-python-dateutil==2.8.19.20240106 typing_extensions==4.9.0 urllib3==2.1.0 wcwidth==0.2.13 Whoosh==2.7.4 xapian @ file:///opt/mailman/xapian-1.4.24-cp311-cp311-linux_aarch64.whl xapian-haystack==3.1.0 zope.component==6.0 zope.configuration==5.0 zope.event==5.0 zope.hookable==6.0 zope.i18nmessageid==6.1.0 zope.interface==6.1 zope.schema==7.0.1

1 0

Mailman with Python 3.12
by Andrew Hodgson April 26, 2024

April 26, 2024

Hi. What's the latest on Mailman with Python 3.12? Looking at Ubuntu 24.04 upgrade plans and realised it comes with Python 3.12. Ubuntu are shipping Mailman packages from Debian so not sure if they have made any changes to make Python 3.12 work. I don't use those packages myself. Andrew.

3 3

mailman3-web and the django middleware problem
by Thomas Stein April 26, 2024

April 26, 2024

Howdy! I'm trying to migrate an aged mailman3 installation from ubuntu 20.04 to ubuntu 22.04. Fresh install of mailman3-web gives me: Creating config file /etc/dbconfig-common/mailman3-web.conf with new version creating database mailman3web.db: success. verifying database mailman3web.db exists: success. Creating config file /etc/mailman3/mailman-web.py with new version /usr/lib/python3/dist-packages/django_q/conf.py:174: UserWarning: Retry and timeout are misconfigured. Set retry larger than t imeout,failure to do so will cause the tasks to be retriggered before completion.See https://django-q2.readthedocs.io/en/maste r/configure.html#retry for details. warn( Traceback (most recent call last): File "/usr/bin/django-admin", line 33, in <module> sys.exit(load_entry_point('Django==4.2.11', 'console_scripts', 'django-admin')()) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/django/core/management/__init__.py", line 442, in execute_from_command_line utility.execute() File "/usr/lib/python3/dist-packages/django/core/management/__init__.py", line 416, in execute django.setup() File "/usr/lib/python3/dist-packages/django/__init__.py", line 24, in setup apps.populate(settings.INSTALLED_APPS) File "/usr/lib/python3/dist-packages/django/apps/registry.py", line 124, in populate app_config.ready() File "/usr/lib/python3/dist-packages/allauth/account/apps.py", line 15, in ready raise ImproperlyConfigured( django.core.exceptions.ImproperlyConfigured: allauth.account.middleware.AccountMiddleware must be added to settings.MIDDLEWARE dpkg: error processing package mailman3-web (--configure): installed mailman3-web package post-installation script subprocess returned error exit status 1 Errors were encountered while processing: mailman3-web needrestart is being skipped since dpkg has failed E: Sub-process /usr/bin/dpkg returned an error code (1) I've already seen this thread: https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message… ...but that does not get me anywhere. Could someone please push me in the right direction? cheers! t.

4 12

Slow performance when listing members on Postorius
by Alan So April 24, 2024

April 24, 2024

We are about to upgrade to Mailman core 3.3.9 and Postorius 1.3.10. We notice that for setup with large number of members, the performance is much slower when listing members on web (Postorius). Further troubleshooting show that there are quite a number of API calls which do not appear in Mailman core 3.3.5 and Postorius 1.3.6 when we list members. [17/Apr/2024:14:12:22 +0800] "GET /3.1/members/33a6266d0a04472c8d5d6c78869a964c/preferences HTTP/1.1" 200 156 "-" "GNU Mailman REST client v3.3.5" [17/Apr/2024:14:12:22 +0800] "GET /3.1/members/7a18b7cb90a34ac98881a3f01b5488d1/preferences HTTP/1.1" 200 156 "-" "GNU Mailman REST client v3.3.5" [17/Apr/2024:14:12:22 +0800] "GET /3.1/members/61c6c3e2aaf443babd3bd191519b0424/preferences HTTP/1.1" 200 156 "-" "GNU Mailman REST client v3.3.5" [17/Apr/2024:14:12:22 +0800] "GET /3.1/members/8dd681165b8c436fac6793cae1ed2c27/preferences HTTP/1.1" 200 156 "-" "GNU Mailman REST client v3.3.5" Further tests showing that each database query using "_member_id" in table member can take as much as 0.3 to 0.5 seconds for some large installations. The default 25 members per page mean that it will take at least 7.5 to 12.5 seconds. Changing to 200 members per page will take even longer time. We wonder whether "_member_id" should be indexed just like most other id in the database mailman_core in order to solve the issue. Or are there any other workarounds? +----------------------+--------------+------+-----+---------+----------------+ | Field | Type | Null | Key | Default | Extra | +----------------------+--------------+------+-----+---------+----------------+ | id | int(11) | NO | PRI | NULL | auto_increment | | _member_id | char(32) | YES | | NULL | | | role | int(11) | YES | MUL | NULL | | | list_id | varchar(255) | YES | MUL | NULL | | | moderation_action | int(11) | YES | | NULL | | | address_id | int(11) | YES | MUL | NULL | | | preferences_id | int(11) | YES | MUL | NULL | | | user_id | int(11) | YES | MUL | NULL | | | bounce_score | int(11) | YES | | NULL | | | last_bounce_received | datetime | YES | | NULL | | | last_warning_sent | datetime | YES | | NULL | | | total_warnings_sent | int(11) | YES | | NULL | | +----------------------+--------------+------+-----+---------+----------------+

1 1

Change config to create a new list with all archives off
by Tibor Molnar April 21, 2024

April 21, 2024

Can archiving be changed anywhere in mailman3 configs, so then all new lists created do not archive by default?

5 8

Mailman 3 hosting query
by Bill Robertson April 18, 2024

April 18, 2024

Hi I'm investigating the possibility of transferring a fairly small mailing list I own from Google Groups to MM3 via a hosting service. I'd appreciate any pointers regarding what I should be looking out for with companies that offer this service It also seems very hard to find out which hosting companies are worth considering (In particular, reliability and support are important) Any help much is much appreciated Thanks

4 5

Is there a way to find out when a user subscribed to a list
by Mohsen Masoudfar April 17, 2024

April 17, 2024

Hi, We need to find out when a specific user joined a list. Is there a way to get this information? Thanks!

3 2