January 2023 - Mailman-users - lists.mailman3.org

Logging subscribes/unsubscribes
by Brian Carpenter Oct. 22, 2024

Oct. 22, 2024

Does Mailman 3 log subscribes and unsubscribes for each list the way Mailman 2 did? Brian

5 7

Questions regarding message acceptance
by Pawel Grzywaczewski Sept. 19, 2024

Sept. 19, 2024

Hello, I have few questions regarding usage of Mailman3: 1) We have list1 and list2 with members. Can we specify that all members of list1 can post messages to list2? We could potentially write a script that would synchronize members of another list to “Accept these non-members” of another list, but with thousands of lists it will be difficult to maintain lists in synchro. So perhaps there is a concept of adding another list to “Accept these non-members” and mailman real-time evaluate membership of another list upon message arrival? 2) In explanation of “Accept these non-members” it’s written: “While non-regexp addresses can be entered here, it is preferred to add the address as a nonmember and set the nonmember's Moderation to Default Processing”. I noticed that if someone posts to a list then he is added automatically to non-members. Which means that next time he will be able to post. My understanding is that it’s better to use the feature “Accept these non-members”. Am I correct? Thank you, Paweł

5 7

Display the last post time for a list or all lists.
by Henrik Rasmussen Aug. 9, 2024

Aug. 9, 2024

Does Mailman 3 have something similar to https://www.msapiro.net/scripts/last_post.py displaying the last post time for a list or all lists?

3 4

MM3 generates long lines?
by peter＠chubb.wattle.id.au July 28, 2024

July 28, 2024

I'm seeing emails being dropped when mm3 talks to the local smtp server, with log errors like: 2021-06-23 15:42:24 1lvvea-007r8u-VN H=localhost (<FQDN>) [::1] F=<announce-bounces@<FQDN>> rejected after DATA: maximum allowed line length is 998 octets, got 1036 The email itself did not have such long lines AFAICT. I can disable line length checking on the mailserver, but that sounds like a recipe for the next one along to drop the email. Peter C

4 8

mailman3 digest sending questions and also adding docker to the mix
by bob B April 17, 2024

April 17, 2024

So I have been down the digest rabbit hole. So to confirm my assumptions/findings: Digest size threshold---- means when the total size of held messages hits this setting, a digest is sent Digest Volume Frequency. ---- specifies when the digest volume number gets incremented for digest messages, IT DOES NOT send out digests based on the setting, daily, weekly ... So what does the GUI setting "Send Digest Periodically yes no" do? how periodically does it send digests, if this is set to yes? If I want to send a digest out for a list every day, or every week, how do I set that, especially in the docker environment? Is this something that can be configured in the GUI and configured by each of my list admins? I found that ”'mailman digests --periodic' via cron” should be set in googling, but does that mean I have to do a cron job for any list that wants a scheduled digest sent? My use case is, that I have a list admin who set a size threshold, but regardless of that, they also want their list digest sent out daily, they thought it was the "Digest Volume Frequency" setting but that is not correct. However in their testing they are not getting daily digest, they are getting digests only when the threshold is reached, BUT they have "Send Digest Periodically" set to "yes" and "Enable Digests" is set to "yes"

7 17

hyperkitty.lib.utils Failed to update the fulltext index
by Ben Harris April 13, 2024

April 13, 2024

hello there, i migrated to a new host last night and i've been getting this error from a cronjob mail every minute. anyone have any ideas what would cause this? ERROR 2019-04-17 14:26:33,056 27205 hyperkitty.lib.utils Failed to update the fulltext index: ord() expected a character, but string of length 0 found Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/hyperkitty/lib/utils.py", line 186, in run_with_lock fn(*args, **kwargs) File "/usr/lib/python2.7/dist-packages/hyperkitty/search_indexes.py", line 87, in update_index update_cmd.update_backend("hyperkitty", "default") File "/usr/lib/python2.7/dist-packages/haystack/management/commands/update_index.py", line 276, in update_backend last_max_pk=max_pk) File "/usr/lib/python2.7/dist-packages/haystack/management/commands/update_index.py", line 97, in do_update backend.update(index, current_qs, commit=commit) File "/usr/lib/python2.7/dist-packages/haystack/backends/whoosh_backend.py", line 178, in update self.setup() File "/usr/lib/python2.7/dist-packages/haystack/backends/whoosh_backend.py", line 126, in setup self.index = self.storage.open_index(schema=self.schema) File "/usr/lib/python2.7/dist-packages/whoosh/filedb/filestore.py", line 176, in open_index return indexclass(self, schema=schema, indexname=indexname) File "/usr/lib/python2.7/dist-packages/whoosh/index.py", line 421, in __init__ TOC.read(self.storage, self.indexname, schema=self._schema) File "/usr/lib/python2.7/dist-packages/whoosh/index.py", line 632, in read check_size("int", _INT_SIZE) File "/usr/lib/python2.7/dist-packages/whoosh/index.py", line 626, in check_size sz = stream.read_varint() File "/usr/lib/python2.7/dist-packages/whoosh/filedb/structfile.py", line 191, in read_varint return read_varint(self.read) File "/usr/lib/python2.7/dist-packages/whoosh/util/varints.py", line 102, in read_varint b = ord(readfn(1)) thanks, ben

5 8

Splitting hosts: mta&core vs postorius
by Ruth Ivimey-Cook Jan. 18, 2024

Jan. 18, 2024

I'm trying to set up mailman3 on two hosts, one of which runs core + exim, the other runs postorius (&possibly hyperkitty). I have I think got core set up correctly, and postorius is sort of usable, but anything in the web ui that talks to core ends up with a white screen. I think what is happening is a postorius URL ends up with the core (or perhaps no) hostname, and as there's nothing there to answer it fails. I've checked the settings and I don't think I have misconfigured postorius. Is it possible that the bad url is being passed from core to postorius in some way and reused without changing the host? In the config at present, both hosts are visible to the browser, and each host can communicate with the other. Any ideas on how to pin down the problem better? Ruth

6 31

how to migrate mailing lists to a new domain using mailman 3
by C. Souza Jan. 18, 2024

Jan. 18, 2024

In a few days my current domain will be disabled (it is out of my control) and I would like to know how to migrate the mailing lists to the new domain name. As a solution I added a new domain in mailman 3 and created a script that replicates the lists in this new domain. To forward the emails received by the old lists, the script removes the members and adds the email of the new list. Is there a fashionable way to do that? Also, one problem that I don't have a solution is the archive of the old lists. How to bring them to the new ones? Thanks for your help. My mailing list server is running on a CenOS-7x with postgreSQL and the following mailman packages: Package Version ------------------- ---------- 1 aiosmtpd 1.2.4 2 alembic 1.5.3 3 arrow 0.17.0 4 asgiref 3.3.1 5 atpublic 2.1.2 6 authheaders 0.13.0 7 authres 1.2.0 8 bleach 3.3.0 9 blessed 1.17.12 10 certifi 2020.12.5 11 cffi 1.14.4 12 chardet 4.0.0 13 click 7.1.2 14 cmarkgfm 0.5.2 15 cryptography 3.3.1 16 decorator 4.4.2 17 defusedxml 0.6.0 18 Django 3.0.12 19 django-allauth 0.44.0 20 django-appconf 1.0.4 21 django-compressor 2.4 22 django-extensions 3.1.0 23 django-gravatar2 1.4.4 24 django-haystack 3.0 25 django-mailman3 1.3.5 26 django-picklefield 3.0.1 27 django-q 1.3.4 28 djangorestframework 3.12.2 29 dkimpy 1.0.5 30 dnspython 2.1.0 31 docutils 0.16 32 falcon 2.0.0 33 flufl.bounce 3.0.1 34 flufl.i18n 2.0.2 35 flufl.lock 3.2 36 gunicorn 20.0.4 37 HyperKitty 1.3.3 38 idna 2.10 39 importlib-resources 5.1.0 40 lazr.config 2.2.3 41 lazr.delegates 2.0.4 42 mailman 3.3.2 43 mailman-hyperkitty 1.1.0 44 mailman-web 0.0.3 45 mailmanclient 3.3.2 46 Mako 1.1.4 47 MarkupSafe 1.1.1 48 networkx 2.5 49 nose 1.3.7 50 oauthlib 3.1.0 51 packaging 20.9 52 passlib 1.7.4 53 pip 21.0.1 54 postorius 1.3.3 55 psycopg2-binary 2.8.6 56 publicsuffix2 2.20191221 57 pycparser 2.20 58 Pygments 2.7.4 59 PyJWT 2.0.1 60 pyparsing 2.4.7 61 python-dateutil 2.8.1 62 python-editor 1.0.4 63 python3-openid 3.2.0 64 pytz 2021.1 65 rcssmin 1.0.6 66 readme-renderer 28.0 67 requests 2.25.1 68 requests-oauthlib 1.3.0 69 rjsmin 1.1.0 70 robot-detection 0.4 71 setuptools 39.2.0 72 six 1.15.0 73 SQLAlchemy 1.3.23 74 sqlparse 0.4.1 75 typing-extensions 3.7.4.3 76 urllib3 1.26.3 77 uWSGI 2.0.19.1 78 wcwidth 0.2.5 79 webencodings 0.5.1 80 wheel 0.36.2 81 Whoosh 2.7.4 82 zipp 3.4.0 83 zope.component 4.6.2 84 zope.configuration 4.4.0 85 zope.deferredimport 4.3.1 86 zope.deprecation 4.4.0 87 zope.event 4.5.0 88 zope.hookable 5.0.1 89 zope.i18nmessageid 5.0.1 90 zope.interface 5.2.0 91 zope.proxy 4.3.5 92 zope.schema 6.0.1 -- Carlos Souza

2 1

Loops back to myself
by David Krantz Jan. 12, 2024

Jan. 12, 2024

Hi, I have a problem with my Mailman 3-setup. The symptom is that postfix rejects non-existing addresses for my list domains with <adr(a)example.com>: mail for example.com loops back to myself What I guess happens happens is that postfix for some reason accepts the mail as it is for a relay domain and finds that it is not deliverable locally as the address does not exist locally and then tries to relay it on to the appropriate MX server, which is itself and then fails and generates a bounce message. This is a bit annoying as I have set up postfix to only accept valid addresses. I have set the transport_maps, local_recipient_maps and relay_domains to the files generated by MM3. I run an older version of MM3 (3.0) but prefer to fix this without upgrading as upgrading is a relatively big undertaking. This is mostly a backscatter problem for spam I guess. Any ideas of very simple and easy to forget things that I've probably missed? Cheers // David

5 6

Archive import fails: "IndexError: list index out of range"
by Johannes Rohr Jan. 6, 2024

Jan. 6, 2024

I am now importing the archives of my old mailman2 installation. Unfortunately, with some of the larger and older lists, import fails halfway through, with an exception, the last message of which is IndexError: list index out of range Below is an example. This means that the last few years are missing from the archive in several lists. Are there any suggestions what I could do to still get them importet? Thanks! Johannes File "/usr/lib/python3.8/email/_header_value_parser.py", line 2069, in get_msg_id token, value = get_dot_atom_text(value) File "/usr/lib/python3.8/email/_header_value_parser.py", line 1334, in get_dot_atom_text raise errors.HeaderParseError("expected atom at a start of " email.errors.HeaderParseError: expected atom at a start of dot-atom-text but found '@localhost>' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/opt/mailman/venv/bin/mailman-web", line 8, in <module> sys.exit(main()) File "/opt/mailman/venv/lib/python3.8/site-packages/mailman_web/manage.py", line 37, in main execute_from_command_line(sys.argv) File "/opt/mailman/venv/lib/python3.8/site-packages/django/core/management/__init__.py", line 446, in execute_from_command_line utility.execute() File "/opt/mailman/venv/lib/python3.8/site-packages/django/core/management/__init__.py", line 440, in execute self.fetch_command(subcommand).run_from_argv(self.argv) File "/opt/mailman/venv/lib/python3.8/site-packages/django/core/management/base.py", line 402, in run_from_argv self.execute(*args, **cmd_options) File "/opt/mailman/venv/lib/python3.8/site-packages/django/core/management/base.py", line 448, in execute output = self.handle(*args, **options) File "/opt/mailman/venv/lib/python3.8/site-packages/hyperkitty/management/commands/hyperkitty_import.py", line 387, in handle importer.from_mbox(mbfile, report_name) File "/opt/mailman/venv/lib/python3.8/site-packages/hyperkitty/management/commands/hyperkitty_import.py", line 212, in from_mbox progress_marker.tick(unquote(message.get("message-id", 'n/a'))) File "/usr/lib/python3.8/email/message.py", line 471, in get return self.policy.header_fetch_parse(k, v) File "/usr/lib/python3.8/email/policy.py", line 163, in header_fetch_parse return self.header_factory(name, value) File "/usr/lib/python3.8/email/headerregistry.py", line 607, in __call__ return self[name](name, value) File "/usr/lib/python3.8/email/headerregistry.py", line 202, in __new__ cls.parse(value, kwds) File "/usr/lib/python3.8/email/headerregistry.py", line 535, in parse kwds['parse_tree'] = parse_tree = cls.value_parser(value) File "/usr/lib/python3.8/email/_header_value_parser.py", line 2126, in parse_message_id token, value = get_msg_id(value) File "/usr/lib/python3.8/email/_header_value_parser.py", line 2073, in get_msg_id token, value = get_obs_local_part(value) File "/usr/lib/python3.8/email/_header_value_parser.py", line 1516, in get_obs_local_part if (obs_local_part[0].token_type == 'dot' or IndexError: list index out of range

6 10