September 2020 - Mailman-users - lists.mailman3.org

Find a smtp server to send out emails
by Leon Jan. 15, 2025

Jan. 15, 2025

Hi, This problem is not caused by mailman, but I still want to give it a shot here. I'm hosting a mailing list on top of mailman3. Emails are supposed to be sent out by AWS ses. However, ses requires that sender address must be verified, which leads to a problem that emails sent by subscribers to mailing list cannot be sent to other subcirbers, since their addresses are not verified. And it is impossible to verified every subscriber. Are there smtp service providers allowing unverified email address to send out emails, or do I have other solutions? Thanks. -- Best wishes, Leon

3 2

Re: mail stuck in "out" queue
by Dmitry Makovey Dec. 18, 2024

Dec. 18, 2024

So our mailman got stuck again, but I did follow your advise. Here's what I've found: On 3/29/19 2:58 PM, Mark Sapiro wrote: > On 3/29/19 2:28 PM, Dmitry Makovey wrote: >> I've had encountered this situation now twice: mail is being stuck in >> "out" queue and nothing in the logs indicates the issue. Is there a way >> to ask mailman-core politely to attempt delivery (perhaps with increased >> debugging in the logs) *without* restarting the core (which does solve >> *this* problem but creates other problems, like availability of the >> mailman as a whole) > > > Is the "out" runner running? yes: # docker top mailman-core | grep -F out: 100 21681 13215 0 Mar28 ? 01:14:16 /usr/local/bin/python /usr/local/bin/runner --runner=out:0:1 -C /etc/mailman.cfg > ps -fwwA |grep runner=out > > If not, you should be able to start it as the Mailman user with a > command like > > /path/to/python3 /path/to/mailman/bin/runner -C /path/to/mailman.cfg > --runner=out:0:1 > > See 'ps -fwwA|grep runner' for examples > > If the out runner is running, is there a file named *.bak along with all > the *.pck files in queue/out/ there is one, yes: # ls -l /srv/mail/mailman/core/var/queue/out/*.bak -rw-rw---- 1 100 65533 21512 Apr 14 19:45 /srv/mail/mailman/core/var/queue/out/1555296331.8386078+2c905825b82708e5a682b872b0aff320c9dd0b2e.bak what does it indicate and what should my steps be to resolve this (other than restarting queues)? > And if it's not, is there anything in Mailman's logs to indicate why it > died? > > Also, 'mailman restart' should only take a matter of seconds, but if the > out runner is running but not processing its queue, I think sending it a > SIGINT should restart it. SIGINT killed the process allright, but it didn't auto-respawn. I ended up spawning it with: /usr/local/bin/python /usr/local/bin/runner --runner=out:0:1 -C /etc/mailman.cfg but soon realized it doesn't go to background nicely so I've nohup'ed it in the end. but it did solve my problem. -- Sr System and DevOps Engineer SoM IRT

6 17

Logging subscribes/unsubscribes
by Brian Carpenter Oct. 22, 2024

Oct. 22, 2024

Does Mailman 3 log subscribes and unsubscribes for each list the way Mailman 2 did? Brian

5 7

Questions regarding message acceptance
by Pawel Grzywaczewski Sept. 19, 2024

Sept. 19, 2024

Hello, I have few questions regarding usage of Mailman3: 1) We have list1 and list2 with members. Can we specify that all members of list1 can post messages to list2? We could potentially write a script that would synchronize members of another list to “Accept these non-members” of another list, but with thousands of lists it will be difficult to maintain lists in synchro. So perhaps there is a concept of adding another list to “Accept these non-members” and mailman real-time evaluate membership of another list upon message arrival? 2) In explanation of “Accept these non-members” it’s written: “While non-regexp addresses can be entered here, it is preferred to add the address as a nonmember and set the nonmember's Moderation to Default Processing”. I noticed that if someone posts to a list then he is added automatically to non-members. Which means that next time he will be able to post. My understanding is that it’s better to use the feature “Accept these non-members”. Am I correct? Thank you, Paweł

5 7

Display the last post time for a list or all lists.
by Henrik Rasmussen Aug. 9, 2024

Aug. 9, 2024

Does Mailman 3 have something similar to https://www.msapiro.net/scripts/last_post.py displaying the last post time for a list or all lists?

3 4

hyperkitty.lib.utils Failed to update the fulltext index
by Ben Harris April 13, 2024

April 13, 2024

hello there, i migrated to a new host last night and i've been getting this error from a cronjob mail every minute. anyone have any ideas what would cause this? ERROR 2019-04-17 14:26:33,056 27205 hyperkitty.lib.utils Failed to update the fulltext index: ord() expected a character, but string of length 0 found Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/hyperkitty/lib/utils.py", line 186, in run_with_lock fn(*args, **kwargs) File "/usr/lib/python2.7/dist-packages/hyperkitty/search_indexes.py", line 87, in update_index update_cmd.update_backend("hyperkitty", "default") File "/usr/lib/python2.7/dist-packages/haystack/management/commands/update_index.py", line 276, in update_backend last_max_pk=max_pk) File "/usr/lib/python2.7/dist-packages/haystack/management/commands/update_index.py", line 97, in do_update backend.update(index, current_qs, commit=commit) File "/usr/lib/python2.7/dist-packages/haystack/backends/whoosh_backend.py", line 178, in update self.setup() File "/usr/lib/python2.7/dist-packages/haystack/backends/whoosh_backend.py", line 126, in setup self.index = self.storage.open_index(schema=self.schema) File "/usr/lib/python2.7/dist-packages/whoosh/filedb/filestore.py", line 176, in open_index return indexclass(self, schema=schema, indexname=indexname) File "/usr/lib/python2.7/dist-packages/whoosh/index.py", line 421, in __init__ TOC.read(self.storage, self.indexname, schema=self._schema) File "/usr/lib/python2.7/dist-packages/whoosh/index.py", line 632, in read check_size("int", _INT_SIZE) File "/usr/lib/python2.7/dist-packages/whoosh/index.py", line 626, in check_size sz = stream.read_varint() File "/usr/lib/python2.7/dist-packages/whoosh/filedb/structfile.py", line 191, in read_varint return read_varint(self.read) File "/usr/lib/python2.7/dist-packages/whoosh/util/varints.py", line 102, in read_varint b = ord(readfn(1)) thanks, ben

5 8

Splitting hosts: mta&core vs postorius
by Ruth Ivimey-Cook Jan. 18, 2024

Jan. 18, 2024

I'm trying to set up mailman3 on two hosts, one of which runs core + exim, the other runs postorius (&possibly hyperkitty). I have I think got core set up correctly, and postorius is sort of usable, but anything in the web ui that talks to core ends up with a white screen. I think what is happening is a postorius URL ends up with the core (or perhaps no) hostname, and as there's nothing there to answer it fails. I've checked the settings and I don't think I have misconfigured postorius. Is it possible that the bad url is being passed from core to postorius in some way and reused without changing the host? In the config at present, both hosts are visible to the browser, and each host can communicate with the other. Any ideas on how to pin down the problem better? Ruth

6 31

Loops back to myself
by David Krantz Jan. 12, 2024

Jan. 12, 2024

Hi, I have a problem with my Mailman 3-setup. The symptom is that postfix rejects non-existing addresses for my list domains with <adr(a)example.com>: mail for example.com loops back to myself What I guess happens happens is that postfix for some reason accepts the mail as it is for a relay domain and finds that it is not deliverable locally as the address does not exist locally and then tries to relay it on to the appropriate MX server, which is itself and then fails and generates a bounce message. This is a bit annoying as I have set up postfix to only accept valid addresses. I have set the transport_maps, local_recipient_maps and relay_domains to the files generated by MM3. I run an older version of MM3 (3.0) but prefer to fix this without upgrading as upgrading is a relatively big undertaking. This is mostly a backscatter problem for spam I guess. Any ideas of very simple and easy to forget things that I've probably missed? Cheers // David

5 6

Re: [Mailman-Developers] Re: SSL error while connecting to hyperkitty
by Abhilash Raj Nov. 29, 2023

Nov. 29, 2023

On Sat, Aug 31, 2019, at 10:20 AM, sandeep kumar wrote: > Hi Abhilash > > Thanks for the reply. > > Just two more answers please -:) > > Can I use the sample apache.conf in example_project in my webserver virtual host...?? See this thread for the apache configuration: https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… You'd need to adjust the paths and SSL configuration. > > And what should be the configuration details to be given in uwsgi server...?? http://docs.mailman3.org/en/latest/prodsetup.html#setting-up-a-wsgi-server > > Regards > Sandeep > > > On Sat, Aug 31, 2019 at 10:25 PM Abhilash Raj <maxking(a)asynchronous.in> wrote: >> __ >> On Sat, Aug 31, 2019, at 8:49 AM, sandeep kumar wrote: >>> Hi Abhilash >>> >>> Thanks for your reply. -:) >>> >>> We are using apache httpd as webserver to redirect. >>> >>> the proxy pass in webserver is >>> >>> ProxyPass / http://localhost:8000 >>> ReverseProxyPass / http://localhost:8000 >> >> >> Can you put `base_url: http://localhost:8000/hyperkitty` in your mailman-hyperkitty.cfg and see that it works? :) >> >> This should not try any funny SSL redirection. >> >>> I don't have idea of deploying this in production, so I just went on searching and I found wsgi (say uwsgi) is required to send the requests from webserver to mailman. Correct me if I am wrong. >>> >>> I have few queries listed below. Please reply to them. >>> >>> Should I use the wsgi.py present in the directory of mailman-suite ...?? >> >> Yes, that is the one which is supposed to be used. >> >>> >>> What should be the ProxyPass ..?? Where should the first hit go from webserver ---> uwsgi ---> ?? >> >> uwsgi is web server running Mailman's web componenet. It doesn't need to hit anything. You can restart it directly when you want to restart Mailman's web component, you don't need to do anything to your web server (httpd) for this. >> >> >> >>> >>> Can we run "python manage.py runserver" every time to start mailman suite..?? Can we make mailman-suite start/stop just by restarting the HTTPD..?? >> >> >> No, use a wsgi server, like uwsgi or gunicorn to run mailman-suote. `python manage.runserver` is a command used during development shouldn't be used at all in prod. >> >>> >>> What should be the entry in Hyperkitty.cfg file after all the above steps..?? I mean at the end >>> >>> Please reply to the above queries. Thanks for your help >>> Regards >>> Sandeep >>> >>> >>> >>> >>> >>> On Sat, Aug 31, 2019 at 8:45 PM Abhilash Raj <maxking(a)asynchronous.in> wrote: >>>> On Sat, Aug 31, 2019, at 1:36 AM, sandeep kumar wrote: >>>> > Hi Team >>>> > >>>> > Iam seeing following errors while mailman is trying to archive in >>>> > mailman.log >>>> > >>>> > >>>> > This is my base URL in mailman-hyperkitty.cfg >>>> > >>>> > base_url: http://localhost/hyperkitty >>>> >>>> Are you sure this is the URL? this is http and Mailman shouldn't try to connect to this using HTTPS. >>>> >>>> Is your web server configured to redirect all HTTP traffic to HTTPS? If that is the case, then it is going to fail. >>>> >>>> Which wsgi server are you using? uwsgi? >>>> >>>> Can you also show your ProxyPass configuration? >>>> >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > *During handling of the above exception, another exception >>>> > occurred:Traceback (most recent call last): File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/adapters.py", >>>> > line 449, in send timeout=timeout File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/urllib3-1.24.1-py3.6.egg/urllib3/connectionpool.py", >>>> > line 638, in urlopen _stacktrace=sys.exc_info()[2]) File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/urllib3-1.24.1-py3.6.egg/urllib3/util/retry.py", >>>> > line 398, in increment raise MaxRetryError(_pool, url, error or >>>> > ResponseError(cause))urllib3.exceptions.MaxRetryError: >>>> > HTTPSConnectionPool(host='domain.com <http://domain.com>', port=443): >>>> > Max >>>> > retries exceeded with url: >>>> > /hyperkitty/api/mailman/archive?key=SecretArchiverAPIKey (Caused by >>>> > SSLError(SSLError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate >>>> > verify >>>> > failed (_ssl.c:841)'),))During handling of the above exception, another >>>> > exception occurred:Traceback (most recent call last): File >>>> > "/var/lib/mailman/mailman-hyperkitty/mailman_hyperkitty/__init__.py", >>>> > line >>>> > 154, in _archive_message url = self._send_message(mlist, msg) File >>>> > "/var/lib/mailman/mailman-hyperkitty/mailman_hyperkitty/__init__.py", >>>> > line >>>> > 201, in _send_message files={"message": ("message.txt", >>>> > message_text)}) >>>> > File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/api.py", >>>> > line 116, in post return request('post', url, data=data, json=json, >>>> > **kwargs) File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/api.py", >>>> > line 60, in request return session.request(method=method, url=url, >>>> > **kwargs) File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/sessions.py", >>>> > line 533, in request resp = self.send(prep, **send_kwargs) File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/sessions.py", >>>> > line 668, in send history = [resp for resp in gen] if allow_redirects >>>> > else [] File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/sessions.py", >>>> > line 668, in <listcomp> history = [resp for resp in gen] if >>>> > allow_redirects else [] File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/sessions.py", >>>> > line 247, in resolve_redirects **adapter_kwargs File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/sessions.py", >>>> > line 646, in send r = adapter.send(request, **kwargs) File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/adapters.py", >>>> > line 514, in send raise SSLError(e, >>>> > request=request)requests.exceptions.SSLError: >>>> > HTTPSConnectionPool(host=domain.com <http://domain.com>', port=443): Max >>>> > retries exceeded with url: >>>> > /hyperkitty/api/mailman/archive?key=SecretArchiverAPIKey (Caused by >>>> > SSLError(SSLError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate >>>> > verify >>>> > failed (_ssl.c:841)'),))* >>>> > >>>> > >>>> > Rgrds >>>> > Sandeep >>>> > >>>> > On Sat, Aug 31, 2019 at 10:20 AM sandeep kumar <sandeep7790(a)gmail.com> >>>> > wrote: >>>> > >>>> > > Team any help >>>> > > >>>> > > Sent from my iPhone >>>> > > >>>> > > > On 30-Aug-2019, at 11:18 PM, sandeep kumar <sandeep7790(a)gmail.com> >>>> > > wrote: >>>> > > > >>>> > > > Hi Team >>>> > > > >>>> > > > Iam using httpd to work with ssl on mailman 3 using proxy pass. >>>> > > > >>>> > > > After this configuration Iam not able to connect to hyperkitty. It is >>>> > > throwing ssl certificate error in mailman.log file. >>>> > > > >>>> > > > What should be the configuration of hyperkitty while using https in >>>> > > mailman..? >>>> > > > >>>> > > > Please help me with this Iam struck here from past 4 days >>>> > > > >>>> > > > Rgrds >>>> > > > Sandeep >>>> > > > >>>> > > > Sent from my iPhone >>>> > > >>>> > >>>> > >>>> > -- >>>> > Regards >>>> > Sandeep Kumar >>>> > +91-9642669192 >>>> > _______________________________________________ >>>> > Mailman-Developers mailing list -- mailman-developers(a)python.org >>>> > To unsubscribe send an email to mailman-developers-leave(a)python.org >>>> > https://mail.python.org/mailman3/lists/mailman-developers.python.org/ >>>> > Mailman FAQ: https://wiki.list.org/x/AgA3 >>>> > >>>> > Security Policy: https://wiki.list.org/x/QIA9 >>>> > >>>> >>>> -- >>>> thanks, >>>> Abhilash Raj (maxking) >>> >>> >>> -- >>> Regards >>> Sandeep Kumar >>> +91-9642669192 >>> >> >> -- >> thanks, >> Abhilash Raj (maxking) >> >> > > > -- > Regards > Sandeep Kumar > +91-9642669192 > -- thanks, Abhilash Raj (maxking)

4 3

Mailman3 stopped sending out mail
by Abhijith PA Nov. 22, 2023

Nov. 22, 2023

Hello. Recently my mailman3 instance stopped distributing mail. But mailman's own mail (notification, digest etc) and archiving are working OK. I couldn't figure what is going wrong From mail.log --- Dec 31 10:03:20 lists postfix/smtpd[10900]: Anonymous TLS connection established from mail.xxxx.xx[5.79.72.163]: TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits) Dec 31 10:03:20 lists postfix/smtpd[10900]: Anonymous TLS connection established from mail.xxxx.xx[5.79.72.163]: TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits) Dec 31 10:03:20 lists policyd-spf[10907]: prepend Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=5.79.72.163; helo=mail.xxxx.xx; envelope-from=abhijith(a)xxxx.xx; receiver=<UNKNOWN> Dec 31 10:03:20 lists policyd-spf[10907]: prepend Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=5.79.72.163; helo=mail.xxxx.xx; envelope-from=abhijith(a)xxxx.xx; receiver=<UNKNOWN> Dec 31 10:03:21 lists postfix/smtpd[10900]: 04C2412038F: client=mail.xxxx.xx[5.79.72.163] Dec 31 10:03:21 lists postfix/smtpd[10900]: 04C2412038F: client=mail.xxxx.xx[5.79.72.163] Dec 31 10:03:21 lists postfix/cleanup[10912]: 04C2412038F: message-id=<f875c144-a23c-baa2-7de2-1b102d3e7494(a)xxxx.xx> Dec 31 10:03:21 lists postfix/cleanup[10912]: 04C2412038F: message-id=<f875c144-a23c-baa2-7de2-1b102d3e7494(a)xxxx.xx> Dec 31 10:03:21 lists opendkim[450]: 04C2412038F: s=_teknikKey d=xxxx.xx SSL Dec 31 10:03:21 lists opendkim[450]: 04C2412038F: s=_teknikKey d=xxxx.xx SSL Dec 31 10:03:21 lists postfix/smtpd[10900]: disconnect from mail.xxxx.xx[5.79.72.163] ehlo=2 starttls=1 mail=1 rcpt=1 data=1 quit=1 commands=7 Dec 31 10:03:21 lists postfix/smtpd[10900]: disconnect from mail.xxxx.xx[5.79.72.163] ehlo=2 starttls=1 mail=1 rcpt=1 data=1 quit=1 commands=7 Dec 31 10:03:21 lists postfix/qmgr[13211]: 04C2412038F: from=<abhijith(a)xxxx.xx>, size=1699, nrcpt=1 (queue active) Dec 31 10:03:21 lists postfix/qmgr[13211]: 04C2412038F: from=<abhijith(a)xxxx.xx>, size=1699, nrcpt=1 (queue active) Dec 31 10:03:21 lists postfix/lmtp[10915]: 04C2412038F: to=<test3(a)lists.yyyy.yy>, relay=127.0.0.1[127.0.0.1]:8024, delay=0.87, delays=0.62/0.02/0.04/0.2, dsn=2.0.0, status=sent (250 Ok) Dec 31 10:03:21 lists postfix/lmtp[10915]: 04C2412038F: to=<test3(a)lists.yyyy.yy>, relay=127.0.0.1[127.0.0.1]:8024, delay=0.87, delays=0.62/0.02/0.04/0.2, dsn=2.0.0, status=sent (250 Ok) Dec 31 10:03:21 lists postfix/qmgr[13211]: 04C2412038F: removed Dec 31 10:03:21 lists postfix/qmgr[13211]: 04C2412038F: removed I am not sure why 'postfix/qmgr[13211]: 04C2412038F: removed' is happening. from /var/log/mailman3/smtp.log: Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) handling connection Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) Data: b'LHLO lists.xxxx.xx' Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) Data: b'MAIL FROM:<abhijith(a)xxxx.xx>' Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) sender: abhijith(a)xxxx.xx Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) Data: b'RCPT TO:<test3(a)xxxx.xx>' Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) recip: test3(a)xxxx.xx Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) Data: b'DATA' Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) Data: b'QUIT' Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) connection lost Dec 31 10:03:21 2018 (6323) Connection lost during _handle_client() Here again I am doubtful about 'Connection lost during _handle_client()'. Please help. Abhijith PA

3 5