- Mailman-users - lists.mailman3.org

How to tell who moderated a post?
by bryan.kartzman＠yu.edu 21 Jun '23

21 Jun '23

Is there any way to tell which moderator of a list approved a particular post to that list?

2 3

Re: mailman3 auto-disabling of subscriptions
by Mark Sapiro 19 Jun '23

19 Jun '23

On 6/17/23 17:02, Mike Wertheim wrote: > I set `remove_dkim_headers: yes` in the [mta] section of mailman.cfg. > > I'm seeing a bunch of these errors in the logs: > 2023-06-17 18:57:11 1qAbMA-005Y7W-HP ** mike.wertheim(a)gmail.com > <mailto:mike.wertheim@gmail.com> R=dnslookup_single_domain > T=remote_smtp_single_domain H=alt2.gmail-smtp-in.l.google.com > <http://alt2.gmail-smtp-in.l.google.com> [172.253.62.26]: SMTP error > from remote mail server after end of data: 550-5.7.26 Unauthenticated > email from gmail.com <http://gmail.com> is not accepted due to > domain's\n550-5.7.26 DMARC policy. Please contact the administrator of > gmail.com <http://gmail.com> domain\n550-5.7.26 if this was a legitimate > mail. Please visit\n550-5.7.26 > https://support.google.com/mail/answer/2451690 > <https://support.google.com/mail/answer/2451690> to learn about the\n550 > 5.7.26 DMARC initiative. > w13-20020a05622a190d00b003fde5babbf5si1170418qtc.14 - gsmtp Your issue is mail From: the gmail.com domain to the list and sent to gmail users is being bounced because it fails DMARC. I.e. Gmail applies a DMARC policy of p=reject to mail From: gmail.com even though it's published DMARC policy is p=none. You need to apply DMARC mitigations to this mail. Unfortunately, this requires setting DMARC Mitigate unconditionally to Yes. Mailman 2.1 has a feature to apply DMARC mitigation to messages From: specific domains regardless of any domain specific DMARC Policy. Unfortunately this hasn't been implemented in Mailman 3 yet. I just filed https://gitlab.com/mailman/mailman/-/issues/1084 for that. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 1

Where does sender postorius@ come from?
by Jens Günther 19 Jun '23

19 Jun '23

I just realized, that mails for registering an account and/or resetting ones password are obviously sent from postorius@SERVE_FROM_DOMAIN. Why are they not sent from MAILMAN_ADMIN_EMAIL? The problem is: - an account is trying to register with a mailaddress from a HostEurope-server - HostEurope-Servers are doing Sender-Callouts (bad practise :-D) to verify that a mailaccount exists - mail is then bouncing, b/c those are not answered (shoud I?): status=bounced (host [80.237.138.5] said: 550-Sender verification is required but failed. - bounce then can't be processed, since mailaccount does not exist :-D status=bounced (mail for SERVE_FROM_DOMAIN loops back to myself) Am I missing something are shouldn't it be better to send those mails from MAILMAN_ADMIN_EMAIL? (I don't want to mess with these sender callouts or change anything, HostEurope has been a little bit of a pain in the ... with mailinglists and not much help at all). Thanks in advance, Jens.

3 8

Proxy error.
by Mark London 18 Jun '23

18 Jun '23

My server has several aliases. And Chrome's cookies sometimes get messed up because of it. Several users get a proxy error when trying to connect to the mailman website. One person just fixed it by clearling cookies, although this is not a great solution. Error log says "You may need to add 'psfcmail2.psfc.mit.edu' to ALLOWED_HOSTS". But it is already there in /etc/mailman/settings.py Or should it go elsewhere? Thanks. - Mark Chrome: Proxy Error The proxy server received an invalid response from an upstream server. The proxy server could not handle the request Reason: Error reading from remote server Apache/2.4.52 (Ubuntu) Server at lists.psfc.mit.edu Port 443Error log: ERROR 2023-06-18 19:11:11,568 2114 django.security.DisallowedHost Invalid HTTP_HOST header: 'psfcmail2.psfc.mit.edu'. You may need to add 'psfcmail2.psfc.mit.edu' to ALLOWED_HOSTS. Traceback (most recent call last): File "/opt/mailman/venv/lib/python3.10/site-packages/django/core/handlers/exception.py", line 56, in inner response = get_response(request) File "/opt/mailman/venv/lib/python3.10/site-packages/django/utils/deprecation.py", line 135, in __call__ response = self.process_request(request) File "/opt/mailman/venv/lib/python3.10/site-packages/django/middleware/common.py", line 48, in process_request host = request.get_host() File "/opt/mailman/venv/lib/python3.10/site-packages/django/http/request.py", line 152, in get_host raise DisallowedHost(msg) django.core.exceptions.DisallowedHost: Invalid HTTP_HOST header: 'psfcmail2.psfc.mit.edu'. You may need to add 'psfcmail2.psfc.mit.edu' to ALLOWED_HOSTS

1 1

mailman3 auto-disabling of subscriptions
by Mike Wertheim 17 Jun '23

17 Jun '23

I'm running an email list on mailman3. My users are getting inundated by messages saying that their subscriptions have been disabled due to their bounce score exceeding the mailing list's bounce_score_threshold. But there is nothing wrong with these users' email accounts. They are all perfectly fine. Apparently the issue is somehow related to spam. Whenever I (as admin) get these emails, I just unsubscribe the user and then re-subscribe them. But also, the user gets confused and emails me about it, which unnecessarily takes up their time and mine. The relevant list settings are currently... bounce score threshold: 5 bounce info stale after: 7d bounce disabled warning interval: 7d bounce disable warnings: 5 What's the best way to fix this? I'm considering reducing "bounce info stale after" to "2d" and/or increasing "bounce disabled warning interval" to "90d".

3 5

Postorius -owner messages
by ssehi＠nebraska.edu 16 Jun '23

16 Jun '23

I manage a number of lists for non-technical users that are considered owners of their own lists. Some of them have expressed that they would like to emulate some other mailing list services' "Quiet" owners for people that need to be able to access the list settings for administrative reconciliation as well as a fallback, but want to leave subscription requests or approval of messages to others that are more involved in the day-to-day management. They'd like to disable owner delivery for themselves, and I'd like to not make the change for them using the shell every time I get one of their requests. We have a Postorius front end set up and working, but it doesn't appear that disabling delivery using the List-based preferences in the Postorius interface stops those Owner communications. Is there a way to allow users to disable that natively in Postorius? Thanks, Sam

2 2

Apache proxy error messages.
by Mark London 15 Jun '23

15 Jun '23

I have two users who are getting a proxy error message when they try to connect her our mailman server: Proxy Error The proxy server received an invalid response from an upstream server. The proxy server could not handle the request Reason: Error reading from remote server Apache/2.4.52 (Ubuntu) Server at lists.psfc.mit.edu Has anybody else in an errorlike this before? One person manage to get around this by going in incognito mode on the browser. Does that make any sense?

2 1

unrequested unsubscription
by Mike Wertheim 15 Jun '23

15 Jun '23

I have a Mailman 3 email list, running on Mailman 3.3.3 on Debian 11. A few of the list members are reporting that they received Email Address Unsubscription Confirmation emails, but claim that they never requested to be unsubscribed. (All are Gmail users. but they might be coincidental, since most list members are Gmail users.) Has anyone seen this behavior before? Any ideas on what might be happening?

3 3

SSO
by bryan.kartzman＠yu.edu 15 Jun '23

15 Jun '23

Is it possible to set up SSO so that once users (owners,moderators) set up an account in Postorius on the mailman3 server we have created , they can authenticate against Azure to login instead of the password for the local account Postorius created?

2 1

How to remove a message with an invalid Message-Id?
by McGuire, Tommy M. (MSFC-IS61)[EAST2] 14 Jun '23

14 Jun '23

I have a fun problem: apparently a message sent to a mailing list has an invalid Message-Id (I think), which is causing the message parse to fail while attempting to archive the message. Unfortunately, the message seems to be trapped somewhere and resulting in error logging every few minutes. Is there any way to find and remove the message? Literally, the only thing I've been able to find out about it is that the Message-Id contains the text "[83c48dddbea7492e873224a5ae1c04be-JFBVALKQOJXWILKNK4YVA7CBPJ2XEZKEMV3E64DTPRCW2YLJNR6EK6DPKNWXI4A=(a)microsoft.com]>". The actual errors in the mailmanweb.log are: ERROR 2023-06-14 21:49:40,692 3165793 django.request Internal Server Error: /archives/api/mailman/archive Traceback (most recent call last): File "/usr/local/lib/python3.8/email/_header_value_parser.py", line 2069, in get_msg_id token, value = get_dot_atom_text(value) File "/usr/local/lib/python3.8/email/_header_value_parser.py", line 1334, in get_dot_atom_text raise errors.HeaderParseError("expected atom at a start of " email.errors.HeaderParseError: expected atom at a start of dot-atom-text but found '[83c48dddbea7492e873224a5ae1c04be-JFBVALKQOJXWILKNK4YVA7CBPJ2XEZKEMV3E64DTPRCW2YLJNR6EK6DPKNWXI4A=(a)microsoft.com]>' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/app/mailman/venv/lib/python3.8/site-packages/django/core/handlers/exception.py", line 34, in inner response = get_response(request) File "/app/mailman/venv/lib/python3.8/site-packages/django/core/handlers/base.py", line 115, in _get_response response = self.process_exception_by_middleware(e, request) File "/app/mailman/venv/lib/python3.8/site-packages/django/core/handlers/base.py", line 113, in _get_response response = wrapped_callback(request, *callback_args, **callback_kwargs) File "/app/mailman/venv/lib/python3.8/site-packages/django/views/decorators/http.py", line 40, in inner return func(request, *args, **kwargs) File "/app/mailman/venv/lib/python3.8/site-packages/hyperkitty/views/mailman.py", line 118, in _decorator return func(request, *args, **kwargs) File "/app/mailman/venv/lib/python3.8/site-packages/django/views/decorators/csrf.py", line 54, in wrapped_view return view_func(*args, **kwargs) File "/app/mailman/venv/lib/python3.8/site-packages/hyperkitty/views/mailman.py", line 164, in archive add_to_list(mlist_fqdn, msg) File "/app/mailman/venv/lib/python3.8/site-packages/hyperkitty/lib/incoming.py", line 65, in add_to_list msg_id = get_message_id(message) File "/app/mailman/venv/lib/python3.8/site-packages/hyperkitty/lib/utils.py", line 60, in get_message_id msg_id = email.utils.unquote(re.sub(r'\s', '', message['Message-Id'])) File "/usr/local/lib/python3.8/email/message.py", line 391, in __getitem__ return self.get(name) File "/usr/local/lib/python3.8/email/message.py", line 471, in get return self.policy.header_fetch_parse(k, v) File "/usr/local/lib/python3.8/email/policy.py", line 163, in header_fetch_parse return self.header_factory(name, value) File "/usr/local/lib/python3.8/email/headerregistry.py", line 607, in __call__ return self[name](name, value) File "/usr/local/lib/python3.8/email/headerregistry.py", line 202, in __new__ cls.parse(value, kwds) File "/usr/local/lib/python3.8/email/headerregistry.py", line 535, in parse kwds['parse_tree'] = parse_tree = cls.value_parser(value) File "/usr/local/lib/python3.8/email/_header_value_parser.py", line 2126, in parse_message_id token, value = get_msg_id(value) File "/usr/local/lib/python3.8/email/_header_value_parser.py", line 2073, in get_msg_id token, value = get_obs_local_part(value) File "/usr/local/lib/python3.8/email/_header_value_parser.py", line 1516, in get_obs_local_part if (obs_local_part[0].token_type == 'dot' or IndexError: list index out of range The errors in the mailman.log are even less useful; they're basically copies of the HTML error page. Jun 14 17:05:02 2023 (3165816) HyperKitty failure on https://lists.nasa.gov/archives/api/mailman/archive: ... <div class="alert alert-danger">An error occurred while processing your request.</div> ... Jun 14 17:05:02 2023 (3165816) Exception in the HyperKitty archiver: ... Jun 14 17:05:02 2023 (3165816) Traceback (most recent call last): File "/app/mailman/venv/lib/python3.8/site-packages/mailman_hyperkitty/__init__.py", line 151, in _archive_message url = self._send_message(mlist, msg) File "/app/mailman/venv/lib/python3.8/site-packages/mailman_hyperkitty/__init__.py", line 207, in _send_message raise ValueError(result.text) ValueError: ... <div class="alert alert-danger">An error occurred while processing your request.</div> ... Any help would be appreciated! Tommy M. McGuire Tommy.M.McGuire(a)nasa.gov

2 1