- Mailman-users - lists.mailman3.org

HyperKitty: discussions not updating, misreporting stats
by Cameron Smith Nov. 13, 2017

Nov. 13, 2017

These are a couple of HyperKitty issues that I have talked about in August [1]. I’ve been doing a bit more experimentation in the last few days and am reporting my findings. The two issues are: — Missing messages: HyperKitty doesn’t show all of the messages in a discussion - Misreporting of discussion statistics: HyperKitty doesn’t update the number of participants and comments in a discussion I’m using the latest Docker setup. Neither of these issues are solved by updating or rebuilding indexes: sudo docker exec mailman-web ./manage.py update_index sudo docker exec mailman-web ./manage.py rebuild_index However, if I stop and then restart the containers (sudo docker-compose down; sudo docker-compose up -d), the discussion statistics are updated and properly display the number of participants and comments in all discussions. This does not, however, solve the problem of missing messages. I have discovered two methods of displaying the missing discussion messages: add a new message to the thread in HyperKitty; I’m not convinced that this works *every* time, but it at least works *most* times run the yearly cron job; this seems to work *every* time: sudo docker exec mailman-web ./manage.py runjobs yearly [1]: https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… Cameron Smith

2 1

Bounces
by David Krantz Nov. 7, 2017

Nov. 7, 2017

Hi. How do I config mailman 3.1x to send any unrecognized bounces to e.g. the list owner? Now they just end up in the bounces table but I would like to see the entire message in this case. Cheers // David

2 3

LDAP/Krb5/SAML auth for Mailman
by Dmitry Makovey Nov. 7, 2017

Nov. 7, 2017

Can anyone share some information on LDAP/Krb5 or better yet SAML auth implementation for Mailman. Is it just adding appropriate auth module to DJango project or is there more involved things? -- Sr System and DevOps Engineer SoM IRT

2 1

configuring moderators per list
by Dmitry Makovey Nov. 7, 2017

Nov. 7, 2017

We're trying to configure moderator per list and so far we were only able to add "superuser" accounts that can handle "Held messages", "Members", "Banned addresses" etc. Is there a way to create special account per-list to manage some of the aspects of particular ML without giving them all the permissions that Superuser comes along with? In MM2 there was a ML password that moderator/list admin would use to login to perform operations. Current setup allows list admins to add/delete existing lists which is not desired. -- Sr System and DevOps Engineer SoM IRT

3 3

disabling social login
by Dmitry Makovey Nov. 6, 2017

Nov. 6, 2017

Hi, I'm trying to disable social login and running into troubles stepping on it's remnants all over the place. What's the proper sequence for disabling social login in MM3 install? -- Sr System and DevOps Engineer SoM IRT

3 4

Message shows up individually but not in the thread
by Marvin Gülker Nov. 4, 2017

Nov. 4, 2017

Hi, I've just observed something weird. While some users were testing the new mailman setup, the reply did not make it into the corresponding thread, but is still associated with it. That is, the message does not show up in the thread page at[1]. However, the reply is visible if requested individually[2]. Now what's weird is that in [2] there's a link at the top that says "< thread" that takes one to [1], so there is some kind of association appearently made but only in one direction (the reverse one). mailman.log has this to say: Nov 03 17:22:31 2017 (498) ACCEPT: <1fa6f9e1-254c-e999-42d0-9a6cc263020d(a)openmailbox.org> Nov 03 17:22:32 2017 (507) 127.0.0.1 - - "GET /3.0/users/sydneyjd(a)openmailbox.org HTTP/1.1" 200 305 Nov 03 17:22:32 2017 (495) HyperKitty archived message <1fa6f9e1-254c-e999-42d0-9a6cc263020d(a)openmailbox.org> to https://lists.secretchronicles.org/hyperkitty/list/tsc-users@lists.secretch… The mailman-suite log contains: INFO 2017-11-03 17:22:32,910 14330 hyperkitty.views.mailman Archived message <1fa6f9e1-254c-e999-42d0-9a6cc263020d(a)openmailbox.org> to https://lists.secretchronicles.org/hyperkitty/list/tsc-users@lists.secretch… This looks to me like a bug. The OP of that thread sent the same message to our other mailinglist[3] (where he did not get a reply), so Mailman may has been confused by that. Marvin [1]: https://lists.secretchronicles.org/hyperkitty/list/tsc-users@lists.secretch… [2]: https://lists.secretchronicles.org/hyperkitty/list/tsc-users@lists.secretch… [3]: https://lists.secretchronicles.org/hyperkitty/list/tsc-devel@lists.secretch… -- Blog: https://www.guelkerdev.de PGP/GPG ID: F1D8799FBCC8BC4F

2 8

Hyperkitty Missing Theme/Style Sheets?
by Andrew Hodder Nov. 1, 2017

Nov. 1, 2017

I have an odd one, my Hyperkitty is functionally working fine (archived several lists without issue, can login/out), however I must have done something wrong during it's setup as it's layout is completely broken (and it keeps throwing Example.com up in the top-left corner). See attached. I'd run into a similar issue with Postorious when I first set it up, but I can't recall what fixed it. Any ideas to what needs correcting? Thanks. Sincerely, Andrew Hodder Systems Administrator Support Operations, Afilias E-mail: drew(a)afilias.info Phone: +1 416.673.4164 Fax: +1 416.646.1541

3 9

localhost[::1] said: 550 Requested action not, taken: mailbox unavailable
by Bjoern Franke Oct. 29, 2017

Oct. 29, 2017

Hi, I created & imported a bunch of 2.1 lists and for one of the lists mm3 replies mailbox unavailable to postfix. I have no clue why this happens because the other lists work. Kind regards Bjoern

2 5

No path configuration found: paths.master
by Pierre Abbat Oct. 27, 2017

Oct. 27, 2017

I installed postorius and hyperkitty with pip and ran into another problem. I ran "mailman info" and got "No path configuration found: paths.master". I have three files named mailman.cfg: /etc/mailman.cfg /usr/local/lib/python3.5/dist-packages/mailman/config/mailman.cfg /var/etc/mailman.cfg The one in /etc contains the following: [mailman] layout: master The one in /var/etc is completely commented out. If I move the one in /etc/ out of the way and run "mailman info" again, I get this: GNU Mailman 3.1.0 (Between The Wheels) Python 3.5.2 (default, Sep 14 2017, 22:51:06) [GCC 5.4.0 20160609] config file: None db url: sqlite:////etc/var/data/mailman.db devmode: DISABLED REST root url: http://localhost:8001/3.1/ REST credentials: restadmin:restpass It said "config file: /var/etc/mailman.cfg" before. What changed? Pierre -- La sal en el mar es más que en la sangre. Le sel dans la mer est plus que dans le sang.

4 6

Moderating posts via email
by Dmitry Makovey Oct. 26, 2017

Oct. 26, 2017

Hi, we are trying to figure out what is that we're doing wrong as we can't use instructions that mailman sends with information on held messages as referenced in: https://gitlab.com/mailman/mailman/blob/master/src/mailman/chains/hold.py#L… In particular - replying to the message with "Approved: listpassword" we were not able to approve any message. Since there's no place we could find in interface to change ML password I did it through the mailmanclient: ml=client.get_list('mylists(a)lists.some.com') ml.settings['moderator_password']='password123' ml.settings.save() after which we've used above password trying to approve messages following the steps outlined above. What are we doing wrong, or where to look for further information? -- Sr System and DevOps Engineer SoM IRT

4 8