- Mailman-users - lists.mailman3.org

The MAILMAN_ARCHIVER_KEY was not sent as the Authorization HTTP header.
by Marco Marinello 25 Oct '21

25 Oct '21

Hi everybody, as per subject, I'm getting this error in the hyperkitty log when mailman daemon tries to archive a mail. I've setup the hyperkitty.cfg file with api_key = MAILMAN_ARCHIVER_KEY in settings_local.py but still nothing. I've seen here and in GitLab issues some errors concerning a wrong api key but here it says that it wasn't sent at all. All packages installed via pip install + latest .zip release, including mailman-hyperkitty. Currently running on apache with mod_wsgi_py3 without https. Any clue? All the best, Marco Marinello

2 9

uncaught bounce messages
by David Bremner 23 Oct '21

23 Oct '21

I'm getting (many) uncaught bounce messages for one user. Other than forcibly unsubscribing them, is there anything I can do? I hesitate to post this message publically, but here is what I can see, somewhat anonymized The MIME structure looks like └┬╴multipart/mixed 7030 bytes ├─╴text/plain 442 bytes ├─╴message/delivery-status 176 bytes └─╴text/rfc822-headers 5301 bytes In /var/log/mailman3/bounce.log I see lines like Oct 23 08:20:00 2021 (5320) Bounce message w/no discernable addresses: <hex-digits(a)foo.bar> In the delivery-status part I see Final-Recipient: rfc822; fub(a)foo.bar Action: delayed Status: 4.0.0 The initial text/plain part looks like Hi! This is the MAILER-DAEMON, please DO NOT REPLY to this email. A message is delayed for more than 4 hours for the following list of recipients: fub(a)foo.bar: Network error on destination MXs Please note that this is only a temporary failure report. The message is kept in the queue for up to 7 days. You DO NOT NEED to re-send the message to these recipients. Below is a copy of the original message:

2 1

installing a new instance of mm3
by Christian Stalberg 22 Oct '21

22 Oct '21

Is this document that Brian Carpenter wrote still valid? https://wiki.list.org/DOC/Howto_Install_Mailman3_On_Debian10 Brian installed my instance. Now its broken. My lists are down. I'm getting nowhere with diagnostics and troubleshooting (which was easier with mailman 2). I'm considering a new install, hence the question. Thanks!

3 3

[Django] ERROR (EXTERNAL IP): Internal Server Error: /mailman3/accounts/XXXXX/login/
by Odhiambo Washington 22 Oct '21

22 Oct '21

Where XXXXX from the subject implies github|fedora|openid|gitlab, etc, I edited my settings.py and removed those references to socialaccount auth providers, except google: INSTALLED_APPS = ( 'hyperkitty', 'postorius', 'django_mailman3', # Uncomment the next line to enable the admin: 'django.contrib.admin', # Uncomment the next line to enable admin documentation: # 'django.contrib.admindocs', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.staticfiles', 'rest_framework', 'django_gravatar', 'compressor', 'haystack', 'django_extensions', 'django_q', 'allauth', 'allauth.account', 'allauth.socialaccount', 'allauth.socialaccount.providers.google' ) On a daily basis, I get messages like below, referring to all those socialaccount auth providers that I removed. I am beginning to think that MM3 is reading a file other than that which I think it should. PS: I have restarted mailman, uwsgi, apache, and even the whole server. These messages just won't go away. Whole message here: Ubuntu Pastebin <https://pastebin.ubuntu.com/p/QPYDtXg5Fn/> -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254 7 3200 0004/+254 7 2274 3223 "Oh, the cruft.", egrep -v '^$|^.*#' :-)

3 2

Mailman3 upgrades
by dancab＠caltech.edu 21 Oct '21

21 Oct '21

I've encountered an issue where Mailman3 is looking for an older jquery package after updating HyperKitty to 1.3.5. I found the error below via Firefox developer tools. "Loading failed for the <script> with source “https://mailman3.caltech.edu/static/hyperkitty/libs/jquery/jquery-1.10.1.min.js” Sure enough, I do not have that script. ls -l static/hyperkitty/libs/jquery/ total 692 -rw-r--r-- 1 gunicorn root 288580 Oct 19 14:55 jquery-3.6.0.js -rw-r--r-- 1 gunicorn root 89501 Oct 19 14:55 jquery-3.6.0.min.js -rw-r--r-- 1 gunicorn root 137972 Oct 19 14:55 jquery-3.6.0.min.map -rw-r--r-- 1 gunicorn root 117370 Oct 19 14:55 jquery-ui-1.10.3.custom.js -rw-r--r-- 1 gunicorn root 58173 Oct 19 14:55 jquery-ui-1.10.3.custom.min.js -rw-r--r-- 1 gunicorn root 68 Oct 19 14:55 jquery-ui-selection.txt drwxr-xr-x 1 gunicorn root 4096 Oct 19 14:55 smoothness Any ideas? Thanks again for all your help. -- Dan Caltech

3 4

Out runner not sending emails, stuck on recvFrom.
by 01ste02＠gmail.com 20 Oct '21

20 Oct '21

My mta is logging a connection, which times out every three minutes. The strace for the out runner shows the following: fstat(20, {st_mode=S_IFREG|0660, st_size=3063808, ...}) = 0 stat("/var/lib/mailman3/data/mailman.db", {st_mode=S_IFREG|0660, st_size=3063808, ...}) = 0 pread64(20, "SQLite format 3\0\20\0\1\1\0@ \0\0\1\32\0\0\2\354"..., 100, 0) = 100 fcntl(20, F_SETLK, {l_type=F_RDLCK, l_whence=SEEK_SET, l_start=1073741824, l_len=1}) = 0 fcntl(20, F_SETLK, {l_type=F_RDLCK, l_whence=SEEK_SET, l_start=1073741826, l_len=510}) = 0 fcntl(20, F_SETLK, {l_type=F_UNLCK, l_whence=SEEK_SET, l_start=1073741824, l_len=1}) = 0 stat("/var/lib/mailman3/data/mailman.db-journal", 0x7fff3e9a8120) = -1 ENOENT (No such file or directory) stat("/var/lib/mailman3/data/mailman.db-wal", 0x7fff3e9a8120) = -1 ENOENT (No such file or directory) fstat(20, {st_mode=S_IFREG|0660, st_size=3063808, ...}) = 0 pread64(20, "SQLite format 3\0\20\0\1\1\0@ \0\0\1\32\0\0\2\354"..., 4096, 0) = 4096 pread64(20, "\r\0\0\0\26\2\7\0\17\212\17E\16\372\16\230\16Y\f\220\n\240\n-\t\273\tI\10\300\10o"..., 4096, 106496) = 4096 pread64(20, "\0\0\0\0changes BOOLEAN, \n\tadministr"..., 4096, 32768) = 4096 pread64(20, "\r\v\234\0\23\0\333\0\r0\n\253\n5\t\240\10\201\7\370\6\324\6e\5\340\5\4\4\206\4\24"..., 4096, 114688) = 4096 pread64(20, "\r\0\330\0\24\0\231\0\v\266\vE\n\351\t\352\t\261\10f\7\305\0073\5,\4\305\4n\3\370"..., 4096, 208896) = 4096 fcntl(20, F_SETLK, {l_type=F_UNLCK, l_whence=SEEK_SET, l_start=0, l_len=0}) = 0 fcntl(20, F_SETLK, {l_type=F_RDLCK, l_whence=SEEK_SET, l_start=1073741824, l_len=1}) = 0 fcntl(20, F_SETLK, {l_type=F_RDLCK, l_whence=SEEK_SET, l_start=1073741826, l_len=510}) = 0 fcntl(20, F_SETLK, {l_type=F_UNLCK, l_whence=SEEK_SET, l_start=1073741824, l_len=1}) = 0 stat("/var/lib/mailman3/data/mailman.db-journal", 0x7fff3e9a92f0) = -1 ENOENT (No such file or directory) pread64(20, "\0\0\1\32\0\0\2\354\0\0\0\0\0\0\0\0", 16, 24) = 16 stat("/var/lib/mailman3/data/mailman.db-wal", 0x7fff3e9a92f0) = -1 ENOENT (No such file or directory) fstat(20, {st_mode=S_IFREG|0660, st_size=3063808, ...}) = 0 pread64(20, "\n\0\0\0\20\16\270\0\17\325\17N\17\304\179\17\262\17%\17\237\17\357\17\207\17\17\17w\16\371"..., 4096, 36864) = 4096 pread64(20, "\5\0\0\0\3\17\361\0\0\0\2\301\17\373\17\366\17\361\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096, 28672) = 4096 pread64(20, "\r\0\0\0\4\0020\0\0020\f\274\10a\5H\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096, 270336) = 4096 fcntl(20, F_SETLK, {l_type=F_UNLCK, l_whence=SEEK_SET, l_start=0, l_len=0}) = 0 fcntl(20, F_SETLK, {l_type=F_RDLCK, l_whence=SEEK_SET, l_start=1073741824, l_len=1}) = 0 fcntl(20, F_SETLK, {l_type=F_RDLCK, l_whence=SEEK_SET, l_start=1073741826, l_len=510}) = 0 fcntl(20, F_SETLK, {l_type=F_UNLCK, l_whence=SEEK_SET, l_start=1073741824, l_len=1}) = 0 stat("/var/lib/mailman3/data/mailman.db-journal", 0x7fff3e9a9390) = -1 ENOENT (No such file or directory) pread64(20, "\0\0\1\32\0\0\2\354\0\0\0\0\0\0\0\0", 16, 24) = 16 stat("/var/lib/mailman3/data/mailman.db-wal", 0x7fff3e9a9390) = -1 ENOENT (No such file or directory) fstat(20, {st_mode=S_IFREG|0660, st_size=3063808, ...}) = 0 pread64(20, "\2\r \0\31\fL\24\0\0\2\25\f\306\rO\17?\r\354\16-\ro\r\302\r\6\16d\r\211"..., 4096, 192512) = 4096 pread64(20, "\n\2\241\0\177\1k\1\17<\16\236\1\360\2\206\16\203\16h\16J\16.\1k\16\17\r\360\r\327"..., 4096, 1032192) = 4096 fcntl(20, F_SETLK, {l_type=F_UNLCK, l_whence=SEEK_SET, l_start=0, l_len=0}) = 0 clock_gettime(CLOCK_REALTIME, {tv_sec=1634752684, tv_nsec=599142985}) = 0 clock_gettime(CLOCK_REALTIME, {tv_sec=1634752684, tv_nsec=599473757}) = 0 getpid() = 1262375 write(17, "Oct 20 19:58:04 2021 (1262375) U"..., 101) = 101 clock_gettime(CLOCK_REALTIME, {tv_sec=1634752684, tv_nsec=600257524}) = 0 clock_gettime(CLOCK_REALTIME, {tv_sec=1634752684, tv_nsec=601667144}) = 0 getpid() = 1262375 write(17, "Oct 20 19:58:04 2021 (1262375) C"..., 59) = 59 socket(AF_INET, SOCK_STREAM|SOCK_CLOEXEC, IPPROTO_TCP) = 21 connect(21, {sa_family=AF_INET, sin_port=htons(465), sin_addr=inet_addr("127.0.0.1")}, 16) = 0 recvfrom(21, And the mailman smtp-log shows: Oct 20 19:58:04 2021 (1262375) <163474270655.1243104.7078333516263200191@xxx> delivery to xxx@xxx failed with code 444, Connection unexpectedly closed Oct 20 19:58:04 2021 (1262375) Using agent: <mailman.mta.bulk.BulkDelivery object at 0x7f219bf93310> Oct 20 19:58:04 2021 (1262375) Connecting to 127.0.0.1:465 when it times out. The debug log also shows this: Oct 20 18:42:46 2021 (1262296) [OutgoingRunner] doing periodic Oct 20 18:42:46 2021 (1262296) [OutgoingRunner] committing transaction Oct 20 18:42:46 2021 (1262296) [OutgoingRunner] checking short circuit Oct 20 18:42:46 2021 (1262296) [OutgoingRunner] short circuiting Oct 20 18:42:46 2021 (1262296) [OutgoingRunner] ending oneloop: 29 I have no clue as to what is going on. Has anyone experienced this before?

2 1

Postorius web issues after upgrading mailman 3
by Tibor Molnar 20 Oct '21

20 Oct '21

Hello, I hope someone could help me in relation to this issue. I have experienced some error with my mailman3 deployment (only in postorius web) after went through the upgrading procedure following https://docs.mailman3.org/en/latest/upgrade-3.2.html#upgrading-mailman-3 I believe this is nothing else then the wrong css/js files gone to the wrong directory or they aren't implemented properly. Basically some part of it works ok and some doesn't. The following web pages doesn't seem to be implementing the css/js files is Archives, Account, Posting Activity, Log in and Log out web pages. Any help would be appreciated. Regards, Tibor

3 8

How to change or create list styles
by Adam Minski 19 Oct '21

19 Oct '21

Hello, how can I change list style defaults or create new list styles? I think the mailman shell way isn't persistent, and I would prefer some kind of config file. I have not found any helpful yet. Thx.

3 6

Request Entity Too Large
by Christian Stalberg 19 Oct '21

19 Oct '21

Now mail sent to mm3 for distribution is not going out, for two different lists. The mailman.log shows this error: Oct 17 21:50:00 2021 (491) ACCEPT: <030601d7c3a0$ee342f20$ca9c8d60$(a)somedomain.com> Oct 17 21:50:04 2021 (488) HyperKitty failure on https://somedomain.net/archives/api/mailman/archive: <html> <head><title>413 Request Entity Too Large</title></head> <body bgcolor="white"> <center><h1>413 Request Entity Too Large</h1></center> <hr><center>nginx/1.14.2</center> </body> </html> (413) Oct 17 21:50:04 2021 (488) Exception in the HyperKitty archiver: <html> <head><title>413 Request Entity Too Large</title></head> <body bgcolor="white"> <center><h1>413 Request Entity Too Large</h1></center> <hr><center>nginx/1.14.2</center> </body> </html> Oct 17 21:50:04 2021 (488) Traceback (most recent call last): File "/opt/mailman/mm/venv/lib/python3.7/site-packages/mailman_hyperkitty/__init_ _.py", line 154, in _archive_message url = self._send_message(mlist, msg) File "/opt/mailman/mm/venv/lib/python3.7/site-packages/mailman_hyperkitty/__init_ _.py", line 210, in _send_message raise ValueError(result.text) ValueError: <html> <head><title>413 Request Entity Too Large</title></head> <body bgcolor="white"> <center><h1>413 Request Entity Too Large</h1></center> <hr><center>nginx/1.14.2</center> </body> </html> Please advise. TY. -----Original Message----- From: Mark Sapiro <mark(a)msapiro.net> Sent: Saturday, October 16, 2021 11:21 AM To: mailman-users(a)mailman3.org Subject: [MM3-users] Re: FW: [Django] ERROR (EXTERNAL IP): Internal Server Error: /user-profile/ On 10/16/21 9:52 AM, Christian Stalberg via Mailman-users wrote: > When I go to https://.../admin/ I get a Django Administration screen > and in the upper right hand corner I see > > WELCOME, <username>. VIEW SITE / CHANGE PASSWORD / LOG OUT And my point was if you go to Users under Authentication and Authorization you should find that alekos.pantazis is a user. If you go to your own https://www.grizz.org/user-profile/ page, do you see a gravatar to the right of the Username, First name, Last name boxes, and does going there produce the same error in the logs. If that's all OK, then I don't know what produced the original error, but I think you can ignore it. If that produces the same error in the logs, then something is wrong with your django-mailman3 installation, but I don't know what. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan _______________________________________________ Mailman-users mailing list -- mailman-users(a)mailman3.org To unsubscribe send an email to mailman-users-leave(a)mailman3.org https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org/

2 3

API privileges question for mailman3
by bob B 19 Oct '21

19 Oct '21

In mailman3 documentation it says: "Because the REST server has full administrative access, it should never be exposed to the public internet. By default it only listens to connections on localhost." So I just wanted to confirm there is no way to limit API access? For example I have a group that wants to use API access to mange their mail lists, but from what I can gather, if I give them access to the API they would have access to ALL the mail lists etc.. I would suspect this is even true if I give them their own domain? Is there anyway to limit access via the API to certain lists etc.....

3 7