- Mailman-users - lists.mailman3.org

Mass subscription and Delivery mode/status
by Andreas Vetter May 14, 2025

May 14, 2025

Hello all, we run a venv installation of "mailman postorius django-mailman3 hyperkitty mailman-web". When I mass subscribe (pre-verified) a new mail address into a list, the Delivery mode appears as Regular in /mailman3/lists/somelist.example.com/members/member/ That is what I expect. When I click on the new mail address from there, i.e. mailman3/lists/somelist.example.com/members/options/eimer@mail.org?role=mem… the Delivery status is ----- instead of Enabled and the Delivery mode is ----- instead of Regular. In fact, all yes/no radio buttons are unset. This is unexpected. What does ----- mean in that case? Is it unset and some default (from the list?) is used? After thinking another round about it: Is the view mailman3/lists/somelist.example.com/members/options/eimer@mail.org?role=mem… only filled with values, when somebody (member, list owner or admin) actively set values and unfilled otherwise? -- Mit freundlichen Gruessen, Andreas Vetter

3 2

Bots outbreak - Subscriptions pending user confirmation (58)
by Odhiambo Washington May 14, 2025

May 14, 2025

Daily, I am getting not less than 50 "Subscriptions pending user confirmation". There must be a way to stop them. I am using https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… already. <Location /accounts/signup> <Limit POST PUT DELETE> Order allow,deny Allow from all Include /opt/mailman/tor-exit-list.conf </Limit> </Location> wash@eu:/etc/apache2/sites-enabled$ cat /opt/mailman/tor-exit-list.conf | wc -l 2081 Does this mean the restrictions aren't caching them? -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254 7 3200 0004/+254 7 2274 3223 In an Internet failure case, the #1 suspect is a constant: DNS. "Oh, the cruft.", egrep -v '^$|^.*#' ¯\_(ツ)_/¯ :-) [How to ask smart questions: http://www.catb.org/~esr/faqs/smart-questions.html]

2 1

Can mailman3 use google or cloudflare captcha ?
by Kim Sunggun May 13, 2025

May 13, 2025

Hello, I can setup client side for any of captcha in /opt/mailman/venv/lib/python3.9/site-packages/django_mailman3/templates/account/login.html. However, I don't understand where I should I put captcha code(Server-side validation) for mailman3. is there any tip to setup captcha ?

2 1

alembic.util.exc.CommandError: Can't locate revision identified by xx
by Lars Bjørndal May 13, 2025

May 13, 2025

I upgraded my Fedora distro from v.40-41. I did pip install wheel mailman psycopg2-binary When running the mailman command, I get alembic.util.exc.CommandError: Can't locate revision identified by '8cc1f79f4459' How do I solve this? Thanks, Lars

1 2

Which file does 'account_login' in login.html point to?
by Kim Sunggun May 8, 2025

May 8, 2025

In /opt/mailman/venv/lib/python3.9/site-packages/django_mailman3/templates/account/ <form class="login form-horizontal" method="POST" action="{% url 'account_login' %}"> #<-----------Here {% bootstrap_form_horizontal form 2 4 %} {% if redirect_field_value %} <input type="hidden" name="{{ redirect_field_name }}" value="{{ redirect_field_value }}" /> {% endif %} <div class="form-group"> <div class="offset-md-2 col-md-4"> <button class="btn btn-primary" type="submit">{% trans "Sign In" %}</button>   <a href="{% url 'account_reset_password' %}">{% trans "Forgot Password?" %}</a> </div> </div> </form>

2 1

Exception when rendering certain emails ([Django] ERROR (EXTERNAL IP): Internal Server Error...)
by Matt Blissett May 5, 2025

May 5, 2025

Hi, I get exceptions logged when certain pages in the email archives (imported from Mailman 2) are opened. For example, this thread: https://lists.tdwg.org/archives/list/tdwg-tag@lists.tdwg.org/thread/HZCJQBJ… Could this be a bug in parsing the message? It's deployed using the maxking Docker packages, v0.5.3b1. Thanks, Matt Log follows: Internal Server Error: /archives/list/tdwg-tag(a)lists.tdwg.org/thread/HZCJQBJPACPZZN7UDNKJIPIFNTM7CA63/replies AssertionError at /archives/list/tdwg-tag(a)lists.tdwg.org/thread/HZCJQBJPACPZZN7UDNKJIPIFNTM7CA63/replies No exception message supplied Request Method: GET Request URL: https://lists.tdwg.org/archives/list/tdwg-tag@lists.tdwg.org/thread/HZCJQBJ… Django Version: 4.2.20 Python Executable: /usr/bin/uwsgi Python Version: 3.12.10 Python Path: ['.', '', '/usr/lib/python312.zip', '/usr/lib/python3.12', '/usr/lib/python3.12/lib-dynload', '/usr/lib/python3.12/site-packages'] Server time: Wed, 30 Apr 2025 15:04:09 +0000 Installed Applications: ['hyperkitty', 'postorius', 'django_mailman3', 'django.contrib.admin', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.staticfiles', 'django.contrib.humanize', 'rest_framework', 'django_gravatar', 'compressor', 'haystack', 'django_extensions', 'django_q', 'allauth', 'allauth.account', 'allauth.socialaccount', 'django_mailman3.lib.auth.fedora', 'allauth.socialaccount.providers.openid', 'allauth.socialaccount.providers.github', 'allauth.socialaccount.providers.gitlab', 'allauth.socialaccount.providers.google'] Installed Middleware: ('django.contrib.sessions.middleware.SessionMiddleware', 'django.middleware.common.CommonMiddleware', 'django.middleware.csrf.CsrfViewMiddleware', 'django.middleware.locale.LocaleMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', 'django.contrib.messages.middleware.MessageMiddleware', 'django.middleware.clickjacking.XFrameOptionsMiddleware', 'django.middleware.security.SecurityMiddleware', 'allauth.account.middleware.AccountMiddleware', 'django_mailman3.middleware.TimezoneMiddleware', 'postorius.middleware.PostoriusMiddleware') Traceback (most recent call last): File "/usr/lib/python3.12/site-packages/django/core/handlers/exception.py", line 55, in inner response = get_response(request) ^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/django/core/handlers/base.py", line 197, in _get_response response = wrapped_callback(request, *callback_args, **callback_kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/hyperkitty/lib/view_helpers.py", line 137, in inner return func(request, *args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/hyperkitty/views/thread.py", line 269, in replies replies_html = replies_tpl.render(context, request) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/django/template/backends/django.py", line 61, in render return self.template.render(context) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/django/template/base.py", line 175, in render return self._render(context) ^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/django/template/base.py", line 167, in _render return self.nodelist.render(context) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/django/template/base.py", line 1005, in render return SafeString("".join([node.render_annotated(context) for node in self])) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/django/template/base.py", line 966, in render_annotated return self.render(context) ^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/django/template/defaulttags.py", line 238, in render nodelist.append(node.render_annotated(context)) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/django/template/base.py", line 966, in render_annotated return self.render(context) ^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/django/template/loader_tags.py", line 208, in render return template.render(context) ^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/django/template/base.py", line 177, in render return self._render(context) ^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/django/template/base.py", line 167, in _render return self.nodelist.render(context) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/django/template/base.py", line 1005, in render return SafeString("".join([node.render_annotated(context) for node in self])) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/django/template/base.py", line 966, in render_annotated return self.render(context) ^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/django/template/base.py", line 1064, in render output = self.filter_expression.resolve(context) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/django/template/base.py", line 742, in resolve new_obj = func(obj, *arg_vals) ^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/hyperkitty/templatetags/decorate.py", line 42, in render return mark_safe(text_renderer(content)) ^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/mistune/markdown.py", line 120, in __call__ return self.parse(s)[0] ^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/mistune/markdown.py", line 93, in parse self.block.parse(state) ^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/mistune/block_parser.py", line 457, in parse end_pos2 = self.parse_method(m, state) ^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/mistune/core.py", line 216, in parse_method return func(m, state) ^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/mistune/block_parser.py", line 368, in parse_block_quote text, end_pos = self.extract_block_quote(m, state) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/mistune/block_parser.py", line 345, in extract_block_quote end_pos = self.parse_method(m4, state) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/mistune/core.py", line 216, in parse_method return func(m, state) ^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/mistune/block_parser.py", line 387, in parse_list return parse_list(self, m, state) ^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/mistune/list_parser.py", line 64, in parse_list groups = _parse_list_item(block, bullet, groups, token, state, rules) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/mistune/list_parser.py", line 174, in _parse_list_item block.parse(child, rules) ^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/mistune/block_parser.py", line 457, in parse end_pos2 = self.parse_method(m, state) ^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/mistune/core.py", line 214, in parse_method assert lastgroup ^^^^^^^^^ Exception Type: AssertionError at /archives/list/tdwg-tag(a)lists.tdwg.org/thread/HZCJQBJPACPZZN7UDNKJIPIFNTM7CA63/replies Raised during: hyperkitty.views.thread.replies Request information: USER: mailman-admin GET: sort = 'thread' last_view = '' POST: No POST data FILES: No FILES data COOKIES: csrftoken = '********************' sessionid = '********************'

3 5

configuring postfix local recipient table
by Alexander Inzinger-Zrock May 5, 2025

May 5, 2025

**System Key Data** OS: Debian 12 mailman: GNU Mailman 3.3.10 (Tom Sawyer) Python: Python 3.11.2 (main, Nov 30 2024, 21:22:50) [GCC 12.2.0] Method: Python Virtual Environment Installation Ahoi, i am trying to configure a mailman3 instance to replace a mailman2 installation (both on different hosts). The mm3 instance is actually not reachable (Incoming) but can send (Outgoing), as is the desired state to be (we intend to swap IPs during change of systems). A. Verify Incoming To verify that emails send to the MTA (postfix) get properly handled and handed over to the mm3-instance i tried to substitute incoming email by a) swaks utility [1] (fail) b) telnet utility [2] (fail) c) command ''mailman inject'' [3] (success) With c) i copied a former generate testmail-file to the mm3-host and injected it directly to my testlist (leaving out the MTA). With a) and b) i tried to hand over a testmail via CLI to the MTA (postfix) what resulted in the error: "Recipient address rejected: User unknown in local recipient table" B. /etc/postfix/main.cfg A search in mailman-users(a)mailman3.org archives [4] pointed me to the configuration of postfix as MTA [5], especially settings with the 'local_recipients_maps' parameter that should be set like [5]: local_recipient_maps = proxy:unix:passwd.byname $alias_maps hash:/path-to-mailman/var/data/postfix_lmtp what i did / already had done. C. aliasing, restarting services and test without , I then restarted postfix, rebuilt the postfix aliases (command ''newaliases'') and rebuilt the mailman aliases (command ''mailman aliases''), even tried with space-separation instead of coma-separation [6], testet again with same result. D. empty /opt/mailman/mm/var/data/postfix_lmtp and then i just found out that my postfix_lmpt file was empty (that i believe to be the the place from where the hastables take their input). Questions: 1. could somebody suggest a way, an entry should occur in postfix_lmtp? 2. What would be the appropriate order to manually generate aliases? first: postfix-command ''newaliases'' and second: mailman-command ''mailman aliases'' or reverse? 3. finding traces [7] of a file called postfix.cfg i can't find it (anymore) in the official installation instructions. Is that file (still?) necessary regarding: 3.1 parameter for default lookup table type 3.2 pointing to command ''postmap'' 4. to what user should the command ''postmap'' be available [8]? Any pointer to manuals or examples i may have missed or ideas on any of those 4 questions would be greatly appreciated. lg alexander Sources: [1] swaks utility https://jetmore.org/john/code/swaks/ [2] telnet utility https://de.wikipedia.org/wiki/Telnet [3] command ''mailman inject'' https://docs.mailman3.org/projects/mailman/en/latest/src/mailman/commands/d… [4] search mailman-users(a)mailman3.org archives 'user unknown in local recipient table' https://lists.mailman3.org/archives/search?q=user+unknown+in+local+recipien… [5] docs mm3: 'Hooking up your mail server' https://docs.mailman3.org/projects/mailman/en/latest/src/mailman/docs/mta.h… [6] docs postfix: local_recipient_maps https://www.postfix.org/postconf.5.html#local_recipient_maps [7] traces of postfix.cfg + https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… + https://docs.mailman3.org/projects/mailman/en/latest/src/mailman/docs/NEWS.… [8] docs mm3: transport maps (regarding command ''postmap'') https://docs.mailman3.org/projects/mailman/en/latest/src/mailman/docs/mta.h…

5 28

acceptable_aliases not updating venv/data/postfix_lmtp
by Stefan Bauer May 5, 2025

May 5, 2025

Dear Users, I'm trying to use acceptable_aliases for a specific list; Setting is also active; # curl -s -q --user restadmin:..... http://localhost:8001/3.1/lists/postmaster@domain/config | jq { "acceptable_aliases": [ "abuse@domain" ], However venv/data/postfix_lmtp does not contain abuse@domain, so postfix rejects the mail. What am i doing wrong? Mailman 3.3.9 Thanks in advance Stefan

2 2

Log Owner/Moderator actions ban address matching.
by Hitashi mancho May 1, 2025

May 1, 2025

Dear All, In Mailman 3, is there any way we can log the Owner/Moderator actions like moderator "x" approved the posting on list(a)example.com? Also, I have configured some local ban lists and some global ban lists as per my organization's policy. In my setup, I observed that when someone from the ban list posts to the list, that posting goes into a blackhole without leaving any trace. I may have made some configuration mistakes, but can we log the ban list matching or generate a notification if some postings match the ban list? Regards, Hitachi.

4 7

Mailman not starting after restoring from snapshot
by zachr＠mta.ca April 28, 2025

April 28, 2025

I made a snapshot of my mailman3 VM before running a script to modify a bunch of lists. I stupidly did not turn the VM off before I made the snapshot, so Im almost certain this is a corrupted DB problem from doing a snapshot restore. The issue is now that the mailman service will not start automatically. Im able to get to the web interface but I see the error "Mailman REST API not available. Please start Mailman core." I can su to the mailman user and run 'mailman start -f' which seems to get things going again and shows the lists as they were before the snapshot, which is good, but I would like to get the issue fixed so that services start normally. Any help is appreciated. Here is some terminal output: ===================== ''' root@mlist3:~# systemctl status mailman3 × mailman3.service - GNU Mailing List Manager Loaded: loaded (/etc/systemd/system/mailman3.service; enabled; preset: enabled) Active: failed (Result: exit-code) since Mon 2025-04-28 13:24:43 UTC; 1min 39s ago Process: 1873 ExecStart=/opt/mailman/venv/bin/mailman start (code=exited, status=2) CPU: 776ms Apr 28 13:24:42 mlist3 systemd[1]: Starting mailman3.service - GNU Mailing List Manager... Apr 28 13:24:43 mlist3 mailman[1873]: Usage: mailman start [OPTIONS] Apr 28 13:24:43 mlist3 mailman[1873]: Try 'mailman start -h' for help. Apr 28 13:24:43 mlist3 mailman[1873]: Error: A previous run of GNU Mailman did not exit cleanly (stale_lock). Try using --force Apr 28 13:24:43 mlist3 systemd[1]: mailman3.service: Control process exited, code=exited, status=2/INVALIDARGUMENT Apr 28 13:24:43 mlist3 systemd[1]: mailman3.service: Failed with result 'exit-code'. Apr 28 13:24:43 mlist3 systemd[1]: Failed to start mailman3.service - GNU Mailing List Manager. root@mlist3:~# systemctl start mailman3 Job for mailman3.service failed because the control process exited with error code. See "systemctl status mailman3.service" and "journalctl -xeu mailman3.service" for details. root@mlist3:~# journalctl -xeu mailman3.service ░░ ░░ A start job for unit mailman3.service has begun execution. ░░ ░░ The job identifier is 662. Apr 28 13:24:43 mlist3 mailman[1873]: Usage: mailman start [OPTIONS] Apr 28 13:24:43 mlist3 mailman[1873]: Try 'mailman start -h' for help. Apr 28 13:24:43 mlist3 mailman[1873]: Error: A previous run of GNU Mailman did not exit cleanly (stale_lock). Try using --force Apr 28 13:24:43 mlist3 systemd[1]: mailman3.service: Control process exited, code=exited, status=2/INVALIDARGUMENT ░░ Subject: Unit process exited ░░ Defined-By: systemd ░░ Support: http://www.ubuntu.com/support ░░ ░░ An ExecStart= process belonging to unit mailman3.service has exited. ░░ ░░ The process' exit code is 'exited' and its exit status is 2. Apr 28 13:24:43 mlist3 systemd[1]: mailman3.service: Failed with result 'exit-code'. ░░ Subject: Unit failed ░░ Defined-By: systemd ░░ Support: http://www.ubuntu.com/support ░░ ░░ The unit mailman3.service has entered the 'failed' state with result 'exit-code'. Apr 28 13:24:43 mlist3 systemd[1]: Failed to start mailman3.service - GNU Mailing List Manager. ░░ Subject: A start job for unit mailman3.service has failed ░░ Defined-By: systemd ░░ Support: http://www.ubuntu.com/support ░░ ░░ A start job for unit mailman3.service has finished with a failure. ░░ ░░ The job identifier is 662 and the job result is failed. Apr 28 13:30:21 mlist3 systemd[1]: Starting mailman3.service - GNU Mailing List Manager... ░░ Subject: A start job for unit mailman3.service has begun execution ░░ Defined-By: systemd ░░ Support: http://www.ubuntu.com/support ░░ ░░ A start job for unit mailman3.service has begun execution. ░░ ░░ The job identifier is 1074. Apr 28 13:30:21 mlist3 mailman[1986]: Usage: mailman start [OPTIONS] Apr 28 13:30:21 mlist3 mailman[1986]: Try 'mailman start -h' for help. Apr 28 13:30:21 mlist3 mailman[1986]: Error: A previous run of GNU Mailman did not exit cleanly (stale_lock). Try using --force Apr 28 13:30:22 mlist3 systemd[1]: mailman3.service: Control process exited, code=exited, status=2/INVALIDARGUMENT ░░ Subject: Unit process exited ░░ Defined-By: systemd ░░ Support: http://www.ubuntu.com/support ░░ ░░ An ExecStart= process belonging to unit mailman3.service has exited. ░░ ░░ The process' exit code is 'exited' and its exit status is 2. Apr 28 13:30:22 mlist3 systemd[1]: mailman3.service: Failed with result 'exit-code'. ░░ Subject: Unit failed ░░ Defined-By: systemd ░░ Support: http://www.ubuntu.com/support ░░ ░░ The unit mailman3.service has entered the 'failed' state with result 'exit-code'. Apr 28 13:30:22 mlist3 systemd[1]: Failed to start mailman3.service - GNU Mailing List Manager. ░░ Subject: A start job for unit mailman3.service has failed ░░ Defined-By: systemd ░░ Support: http://www.ubuntu.com/support ░░ ░░ A start job for unit mailman3.service has finished with a failure. ░░ ░░ The job identifier is 1074 and the job result is failed. ''' ====================================== Thank you in advance for any assistance.

3 2