- Mailman-users - lists.mailman3.org

Docker, Mailman 3, templates and list user accounts
by Henrik Rasmussen Aug. 8, 2017

Aug. 8, 2017

I used Docker to installed Mailman 3. The top header of the web interface says "Example.Com" while linking to the correct site URL (I believe coming from SERVE_FROM_DOMAIN). In a post[1], Mark Sapiro referred to the template system in Mailman 3 by pointing out that "a custom template can be put in var/templates/site/en/welcome.txt or var/templates/domains/example.com/en/welcome.txt<http://var/templates/domains/example.com/en/welcome.txt> or var/templates/lists/listname.example.com/en/welcome.txt<http://var/templates/lists/listname.example.com/en/welcome.txt> where var is Mailman's configured var_dir". I believe this refers to the mail templates. 1) Where do I change the similar template system, for the web interface, without breaking a laver upgrade? 2) How do I change the site name in the top of the web interface on Mailman 3 to my subside and ? [1] https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… The Mailman command in Mailman Core doesn't seem to have a command for listing the accounts users have created by using Sign up in the web interface, so I believe that accounts may be created in the webinterface. Is there similar commands for the web interface like the mailman commands for the Mailman core? Regards, Henrik Rasmussen

3 3

config incoming email in my domain cpanel
by Rafael Mora Aug. 4, 2017

Aug. 4, 2017

Hello, I created a test list called: testlist1(a)labbrands.com How do I do in order to redirect the incoming emails to that direction to my server with MM3 ?? Thanks -- Atentamente / Best Regards Ing. Rafael Mora

5 24

Installing mailman 3
by Rafael Mora Aug. 2, 2017

Aug. 2, 2017

Hello, I want to install mailman 3 in a centos 7 virtual machine. I'm following these steps and I cannot make it work: 1. `cd ~` 2. `git clone https://gitlab.com/mailman/mailman.git` 3. `cd mailman` 4. `virtualenv -p python3 venv` 5. `source venv/bin/activate` 6. `python setup.py develop` 7. I am pretty sure this setup command will place a configuration file into `~/mailman/var/etc/mailman.cfg`. Edit this file. https://mailman.readthedocs.io/en/latest/src/mailman/config/docs/config.html 8. `mailman info` can confirm which configuration file is in use 9. `mailman start` will start up Mailman 3 Core. This is what the parent background process command looks like in `ps -ef`: `/home/ubuntu/mailman/venv/bin/python /home/ubuntu/mailman/venv/bin/master -C /home/ubuntu/mailman/var/etc/mailman.cfg` I also tried the steps on the website https://wiki.list.org/DEV/SetupDevEnvironment but it doesn't work either What do you suggest? This is what I get from console: [root@localhost ~]# cd dev/ [root@localhost dev]# cd mailman/ [root@localhost mailman]# source venv3/bin/activate (venv3) [root@localhost mailman]# cd mailman/ (venv3) [root@localhost mailman]# ls conf.py COPYING data README.rst src unittest.cfg contrib coverage.ini MANIFEST.in setup.cfg template.py copybump.py cron port_me setup.py tox.ini (venv3) [root@localhost mailman]# cd .. (venv3) [root@localhost mailman]# mailman start Starting Mailman's master runner /root/dev/mailman/venv3/bin/python: can't open file '/sbin/master': [Errno 2] No such file or directory (venv3) [root@localhost mailman]# Thank you -- Atentamente / Best Regards Ing. Rafael Mora

8 151

Ready to try installation: use "normal" install or docker.
by Tom Browder Aug. 1, 2017

Aug. 1, 2017

The mm3 installation instructions have been somewhat fluid over the development period, butI'm finally ready to dig in and give it a shot and need some last-minute advice. I'm leaning toward installing using the docker method but I would appreciate any recent thoughts about which method to choose. Thanks so much to the MM3 dev team! Best, -Tom

2 4

LMTP runner keeps crashing
by Mark Lindsay Aug. 1, 2017

Aug. 1, 2017

Hl mailman-users! The LMTP runner on my Mailman 3 install (3.1.0b4) has started silently crashing. The parent process and all of the other runners stay up. Nothing interesting seems to be written to the logs. I've been finding out about it when exim4 (running on the same server) starts sending out "retry timeout exceeded" bounce emails to list participants: From: Mail Delivery System [mailto:Mailer-Daemon@lists.mysite.org] > Sent: Monday, July 31, 2017 12:39 PM > To: some_participant(a)mysite.org > Subject: Mail delivery failed: returning message to sender > This message was created automatically by mail delivery software. > A message that you sent could not be delivered to one or more of its > recipients. This is a permanent error. The following address(es) failed: > listname(a)lists.mysite.org > retry timeout exceeded > Action: failed > Final-Recipient: rfc822;listname(a)lists.mysite.org > Status: 5.0.0 After hearing about the bounces from participants, I then SSH to the lists server and attempt to `telnet localhost 8024` but get no response. The LMTP runner is not listed in `ps -ef`. After restarting all of mailman (`mailman stop; mailman start`) I get the `220` response from LMTP on port 8024. I see the LMTP runner in `ps -ef`. Does anyone have any ideas on how I could start debugging this? Thank you, Mark

2 1

Installation guide
by Loring July 31, 2017

July 31, 2017

So I am looking to install the latest mailman 3, however I can find no complete guide as to how to install it. I have found some pages for instance http://mailman.readthedocs.io/en/latest/src/mailman/docs/install.html# This however gives me no instructions on how to install mailman3.x, can anyone point me in the righ direction please. -- Richmond Loring rloring(a)bnl.gov Advanced Systems Engineer

2 1

MM3 statistics
by Tom Browder July 28, 2017

July 28, 2017

Are there any plugins or programs for mm3 statistics? Thanks. -Tom

3 4

Mailman 3 Status Update Please?
by ddw David Wilson July 26, 2017

July 26, 2017

Mailman 3 Status Update Please I have been following the progress and difficulties with great interest as many struggle to implement the new version of the great Mailman 3 list-server software. Last year about this time I posed some questions regarding the current development status and recognize that many additional problems seem to get in the way of actually working on long term big picture issues. From my perspective of being an senior (ie overaged) person desirous of implementing fully-featured, capable, scalable, reliable, secure applications such as Mailman, I am convinced that I am thoroughly over my head. From my limited perspective, it would seem to me that a 'nice to have' system would incorporate the following. 1. An open container standard configurable system install, compatible with different web & mail servers, DB utilities, etc; 2. Python 3 version Django utilities for archiving and mail list name management; 3. A design/plan from an inside expert perspective stating costs, time and resources to implement the plan, incorporating crowdfunding to pay for project. 4. As a backup incentive to the crowdfunding plan might be the offer of an expert to set up a system for each significant amount donated, say US$1,000, such as might be accomplished by an SSL session on the target computer/server after the user has specified all necessary detail as required in a template. I am sure that the program author and other major contributors could greatly enhance this list. In summary, I guess what I am requesting is an overview forecast by half year period and out for the next two years? Please share the big picture? Thank you in advance and best regards. Dave Wilson

6 7

MM3.1 templates
by Matt Richards July 20, 2017

July 20, 2017

I've managed, to setup MM3.1 using the docker images from http://github.com/maxking/docker-mailman. I would like to start customizing the templates MM3.1 uses for the footer and confirmation emails. Is there any mailman site admin or list admin documentation on how to customize email templates in MM3.1? I've found this template doc at https://gitlab.com/mailman/mailman/tree/master/src/mailman/rest/docs, but I'm not clear how this works.. and it appears postorius doesn't have template support yet? I am new to python and django.. -- --Matt

2 1

AH01102: error reading status line from remote server 172.19.199.3:8000
by Henrik Rasmussen July 20, 2017

July 20, 2017

I've just installed Mailman 3.1 on RHEL7 (Docker-Mailman3) and to get the right CSS layout I installed Apache on the Mailman server outside Docker, as advised by Abhilash Raj and Alexander Klotz. My Mailman server is on a secured network and the https connection from Internet will be handled by proxy servers, so I will be using http (port 80) between proxy-servers and Mailman server. But when I sign in (currently via an SSH tunnel to the Mailman server from my workstation) I get "Internal error: [client ::1:41912] AH01102: error reading status line from remote server 172.19.199.3:8000, referer: http://localhost/accounts/login/?next=%2Fpostorius%2Flists%2F" If I type a wrong password, I am just warned about that, so the problem appears when log in is accepted. I expect that it is because I connect to localhost:80 through SSH tunnel. What do I miss in my Apache configuration on the Mailman server to avoid this problem? <VirtualHost *:80> ErrorLog /var/log/httpd/error_log LogLevel warn CustomLog /var/log/httpd/access_log combined ServerAdmin root(a)example.foo ServerName list.foo.bar Alias /static /opt/mailman/web/static Alias /favicon.ico /opt/mailman/web/static/hyperkitty/img/favicon.ico ProxyPassMatch ^/static/.* ! ProxyPass / http://172.19.199.3:8000/ ProxyPassReverse / http://172.19.199.3:8000/ <Directory /> Allow from all Require all granted </Directory> <Directory /opt/mailman/web/static/hyperkitty/img/> Allow from all Require all granted </Directory> # ssl config here ... </VirtualHost> Thanks, Henrik Rasmussen

2 3

List of "site admin" commands in Mailman 3.1 docker-mailman
by Henrik Rasmussen July 18, 2017

July 18, 2017

I am new to all of Python, Django, Docker, Docker-compose and everything else used by docker-mailman. I have managed to get a webinterface of Mailman 3.1, I installed using Docker and Docker-Compose from github.com/maxking/docker-mailman, but my config is still bogues (probably just my Apache-config). I'm quite confused about Mailman 3 documentation regarding those commands the site admin would do in Mailman 2 like list_members, config_list -o etc.)., and I have been trying to figure out what documentation regards the development of Mailman 3, what regards the final version 3.1 and what I am supposed to do regarding Docker. 1) Should I enter the container using "docker exec -it mailman-web bash" and run "python" in order to get a python prompt, and from there run commands like those documented at mailman.readthedocs.io/en/latest/src/mailman/commands/docs/control.html ?. 2) Where do I define the what was previously known as the site admin user and site admin e-mail? On another note: Is it a setting in the mailman-users(a)mailman3.org list setup that make each of my postings to the list come back with the note "This sender failed our fraud detection checks and may not be who they appear to be."? Thanks Henrik Rasmussen

4 3

Re: Found error in docker-container
by Abhilash Raj July 17, 2017

July 17, 2017

Hi Alex, On Wed, Jul 5, 2017, at 03:21 AM, Alexander Klotz wrote: > Hi, > > one of our developers wanted to point out an error he found in mailman > 3.1, docker container maxking/mailman-core-0.1 > > The entries in /opt/mailman/core/var/data/postfix_lmtp are not set > correctly, example: > > /^testlist(a)mailman\.example\.com$/ lmtp:[172.19.199.2# IP > Address of mailman-core container]:8024 > > this actually should look like this: > > /^testlist(a)mailman\.example\.com$/ lmtp:[172.19.199.2]:8024 Can you send a copy of your Mailman configuration that you added at `/opt/mailman/core/mailman-extra.cfg`? I think this is mostly because the configuration parser doesn't understand the in-line comments. So, if you are using the configuration exactly as it is mentioned in the documentation, it could be the cause of this problem. Solution to that would be to just remove all the in-line comments. [mta] incoming: mailman.mta.postfix.LMTP outgoing: mailman.mta.deliver.deliver lmtp_host: 172.19.199.2 # IP Address of mailman-core container lmtp_port: 8024 smtp_host: 172.19.199.1 # IP Address of host where postfix is. smtp_port: 25 configuration: /etc/postfix-mailman.cfg Like the two comments seen in the configuration above. I will update the documentation too so that others don't get caught in something like this. Thanks! -- thanks, Abhilash Raj

2 4

postfix, dovecot and MM3
by Matt Richards July 15, 2017

July 15, 2017

This is a bit of a lengthy post, but I wanted to make sure I had enough detail to document the problem I'm experiencing. The quick summary is, I'm having a problem with postfix, dovecot and mailman3.. routing Problem: Postfix mail routing is mostly working correctly with the execpetion of handling test-confirm+157fcaf78907a2bbf21b36aaf349386e09e801a8(a)example.com emails. As you can see below in my postfix config, I have defined recipient_delimiter.. I'm not sure what else is going wrong.. For example, if I email test-confirm(a)example.com, the mail will route over to MM correctly as postfix is able to find this exact email address in the postfix_lmtp transport file. However, if I reply to a mm confirmaion email, test-confirm+157fcaf78907a2bbf21b36aaf349386e09e801a8(a)example.com, postfix will fail to deliver the email correctly due postfix trying to lookup the test-confirm(a)example.com in dovcot's virtual mailbox tables. I hope this is enough information... My research seems to indicate I might need to change something with virtual_alias_maps, however from my testing, changing this setting to include MM3's geneated postfix_lmtp file, it'll cause more problems.. I've also considered using a sub-domain, for example lists.example.com instead of my primary domain for mm3, this may fix a lot of my issues. Setup overview: Integrated mailcow-dockerized (https://github.com/andryyy/mailcow-dockerized) & docker-mailman (https://github.com/maxking/docker-mailman) - all I have done is merged the containers from the docker-mailman docker-compose.yml into mailcow's docker-compose.yml - updated the network settings for docker-mailman to use mailcow's internal network if needed, I can provide my docker-compose file. mx1.example.com = An internal eMail firewall and security server Below is the reject log from postfix: Jul 15 18:11:22 mx10 postfix/smtpd[418]: NOQUEUE: reject: RCPT from mx1.example.com[xxx.xxx.xxx.xxxx]: 550 5.1.1 < test-confirm+157fcaf78907a2bbf21b36aaf349386e09e801a8(a)example.com>: Recipient address rejected: User unknown in virtual mailbox table; from=< xxxx(a)gmail.com> to=< test-confirm+157fcaf78907a2bbf21b36aaf349386e09e801a8(a)example.com> proto=ESMTP helo=<mx1.example.com> Below is my postfix configs: ##Postfix main.cnf biff = no append_dot_mydomain = no smtpd_tls_cert_file = /etc/ssl/mail/cert.pem smtpd_tls_key_file = /etc/ssl/mail/key.pem smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases relayhost = [mx1.example.com]:25 mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 10.0.0.0/8 172.16.0.0/12 192.168.0.0/16 [fd4d:6169:6c63:6f77::]/64 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all bounce_queue_lifetime = 1d broken_sasl_auth_clients = yes disable_vrfy_command = yes maximal_backoff_time = 1800s maximal_queue_lifetime = 1d message_size_limit = 26214400 milter_default_action = accept milter_protocol = 6 minimal_backoff_time = 300s plaintext_reject_code = 550 postscreen_access_list = permit_mynetworks, cidr:/opt/postfix/conf/postscreen_access.cidr, tcp:127.0.0.1:10027 postscreen_bare_newline_enable = no postscreen_blacklist_action = drop postscreen_cache_cleanup_interval = 24h postscreen_cache_map = proxy:btree:$data_directory/postscreen_cache postscreen_dnsbl_action = enforce postscreen_dnsbl_sites = b.barracudacentral.org=127.0.0.2*7 dnsbl.inps.de=127.0.0.2*7 bl.mailspike.net=127.0.0.2*5 bl.mailspike.net=127.0.0.[10;11;12]*4 dnsbl.sorbs.net=127.0.0.10*8 dnsbl.sorbs.net=127.0.0.5*6 dnsbl.sorbs.net=127.0.0.7*3 dnsbl.sorbs.net=127.0.0.8*2 dnsbl.sorbs.net=127.0.0.6*2 dnsbl.sorbs.net=127.0.0.9*2 zen.spamhaus.org=127.0.0.[10;11]*8 zen.spamhaus.org=127.0.0.[4..7]*6 zen.spamhaus.org=127.0.0.3*4 zen.spamhaus.org=127.0.0.2*3 hostkarma.junkemailfilter.com=127.0.0.2*3 hostkarma.junkemailfilter.com=127.0.0.4*1 hostkarma.junkemailfilter.com=127.0.1.2*1 wl.mailspike.net=127.0.0.[18;19;20]*-2 hostkarma.junkemailfilter.com=127.0.0.1*-2 postscreen_dnsbl_threshold = 8 postscreen_dnsbl_ttl = 5m postscreen_greet_action = enforce postscreen_greet_banner = $smtpd_banner postscreen_greet_ttl = 2d postscreen_greet_wait = 3s postscreen_non_smtp_command_enable = no postscreen_pipelining_enable = no proxy_read_maps = proxy:mysql:/opt/postfix/conf/sql/ mysql_virtual_sender_acl.cf, proxy:mysql:/opt/postfix/conf/sql/ mysql_tls_enforce_out_policy.cf, proxy:mysql:/opt/postfix/conf/sql/ mysql_tls_enforce_in_policy.cf, $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $smtpd_sender_login_maps queue_run_delay = 300s relay_domains = proxy:mysql:/opt/postfix/conf/sql/ mysql_virtual_relay_domain_maps.cf relay_recipient_maps = proxy:mysql:/opt/postfix/conf/sql/ mysql_relay_recipient_maps.cf sender_dependent_default_transport_maps = proxy:mysql:/opt/postfix/conf/sql/ mysql_tls_enforce_out_policy.cf smtp_tls_CAfile = /etc/ssl/certs/ca-certificates.crt smtp_tls_cert_file = /etc/ssl/mail/cert.pem smtp_tls_key_file = /etc/ssl/mail/key.pem smtp_tls_loglevel = 1 smtp_dns_support_level = dnssec smtp_tls_security_level = dane smtpd_data_restrictions = reject_unauth_pipelining, permit smtpd_delay_reject = yes smtpd_error_sleep_time = 10s smtpd_hard_error_limit = ${stress?1}${stress:5} smtpd_helo_required = yes smtpd_proxy_timeout = 600s smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks, check_recipient_access proxy:mysql:/opt/postfix/conf/sql/ mysql_tls_enforce_in_policy.cf, reject_invalid_helo_hostname, reject_unknown_reverse_client_hostname, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_path = inet:dovecot:10001 smtpd_sasl_type = dovecot smtpd_sender_login_maps = proxy:mysql:/opt/postfix/conf/sql/ mysql_virtual_sender_acl.cf smtpd_sender_restrictions = reject_authenticated_sender_login_mismatch, permit_mynetworks, reject_sender_login_mismatch, permit_sasl_authenticated, reject_unlisted_sender, reject_unknown_sender_domain smtpd_soft_error_limit = 3 smtpd_tls_auth_only = yes smtpd_tls_dh1024_param_file = /etc/ssl/mail/dhparams.pem smtpd_tls_eecdh_grade = strong smtpd_tls_exclude_ciphers = ECDHE-RSA-RC4-SHA, RC4, aNULL smtpd_tls_loglevel = 1 smtp_tls_mandatory_protocols = !SSLv2, !SSLv3 smtp_tls_protocols = !SSLv2, !SSLv3 lmtp_tls_mandatory_protocols = !SSLv2, !SSLv3 lmtp_tls_protocols = !SSLv2, !SSLv3 smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3 smtpd_tls_protocols = !SSLv2, !SSLv3 smtpd_tls_mandatory_ciphers = high smtpd_tls_security_level = may tls_ssl_options = NO_COMPRESSION tls_high_cipherlist = EDH+CAMELLIA:EDH+aRSA:EECDH+aRSA+AESGCM:EECDH+aRSA+SHA256:EECDH:+CAMELLIA128:+AES128:+SSLv3:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!DSS:!RC4:!SEED:!IDEA:!ECDSA:kEDH:CAMELLIA128-SHA:AES128-SHA transport_maps = regexp:/opt/mailman/core/var/data/postfix_lmtp local_recipient_maps = regexp:/opt/mailman/core/var/data/postfix_lmtp proxy:mysql:/opt/postfix/conf/sql/mysql_virtual_mailbox_maps.cf virtual_alias_maps = proxy:mysql:/opt/postfix/conf/sql/ mysql_virtual_alias_maps.cf, proxy:mysql:/opt/postfix/conf/sql/ mysql_virtual_spamalias_maps.cf, proxy:mysql:/opt/postfix/conf/sql/ mysql_virtual_alias_domain_maps.cf, proxy:mysql:/opt/postfix/conf/sql/ mysql_virtual_alias_domain_catchall_maps.cf virtual_gid_maps = static:5000 virtual_mailbox_base = /var/vmail/ virtual_mailbox_domains = proxy:mysql:/opt/postfix/conf/sql/ mysql_virtual_domains_maps.cf virtual_mailbox_maps = regexp:/opt/mailman/core/var/data/postfix_lmtp proxy:mysql:/opt/postfix/conf/sql/mysql_virtual_mailbox_maps.cf virtual_minimum_uid = 104 virtual_transport = lmtp:inet:dovecot:24 virtual_uid_maps = static:5000 smtpd_milters = inet:rspamd:9900 non_smtpd_milters = inet:rspamd:9900 milter_mail_macros = i {mail_addr} {client_addr} {client_name} {auth_authen} mydestination = localhost.localdomain, localhost #content_filter=zeyple # Prefere IPv4, useful for v4-only envs smtp_address_preference = ipv4 smtp_header_checks = pcre:/opt/postfix/conf/mailcow_anonymize_headers.pcre unknown_local_recipient_reject_code = 550 owner_request_special = no Note: I've replaced my real domain name with example.com, as I don't wish to have my server information publicly archived for spam and security reasons. I have also masked any external IP addreses. I'm also aware my email setup is a bit more complicated than the usual as I have an email firewall/security server in the mix. I've tried my best to accurately describe what I have configured. If you need any actual logs or configs, please contact me directly off this list for this information. -- --Matt

1 0

Does hyperkitty show JPEGs in line and what about attachments?
by Jason Glazer July 13, 2017

July 13, 2017

I run several MailMan 2.1 mailing lists and some subscribers are frustrated by the way pipermail deals with JPEGs that are embedded in the messages and also with how attachments are handled. Does hyperkitty in Mailman 3.1 do better on these issues. Assuming this message gets archived, I am going to try embedding a small picture right here: Hopefully that shows up in the archive. I won't add an attachment because the list may not allow it but I'm curious how those are handled. Thanks Jason -- Jason Glazer, P.E., BEMP, GARD Analytics, 90.1 ECB chair, 209 chair Admin for onebuilding.org building performance mailing lists

4 8

Docker Mailman3 installation frustration
by ccsmith＠cetsi.com July 13, 2017

July 13, 2017

I've been working on installing Mailman3 for several weeks now, with limited success. I have tried various installation methods following instructions on numerous different web pages. My experience has been that the instructions are often conflicting and never complete. My best success has been with the Docker version, so that's what I'm going to concentrate on here. I'm running Ubuntu 16.04 (under Citrix XenServer), with Apache httpd and postfix. Following the instructions on https://asynchronous.in/docker-mailman/, I did the following: * created the directories "/opt/mailman/core" and "/opt/mailman/web", * created "/opt/mailman/core/mailman-extra.cfg" and inserted the suggested [mta] directives, * inserted the "transport_maps", "local-recipient_maps", and "relay_domains" entries in the /etc/postfix/main.cf file, * created the necessary apache config files, * cloned "https://github.com/maxking/docker-mailman", * ran "docker-compose up -d" At this point, I am able to connect with Postorius. All of the text and icons show up properly; all is well. It tells me (correctly) that "There are currently no mailing lists." When I click on the "Login" link at the top right, the "Sign In" page displays correctly. (Aside: Why do so many apps/sites have difficulty with choosing between "login" and "sign in" and, in fact, use both terms? It can really be off-putting to non-tech users... and me.) If I input an incorrect login, I receive (correctly) the message "The username and/or password you specified are not correct." However, if I input the correct sign-in, I receive: "Server Error (500)". Running "sudo docker exec -it mailman-web cat ../mailman-web-data/logs/mailmanweb.log" shows me: ERROR 2017-07-12 20:34:25,073 25 django.request Internal Server Error: /accounts/login/ Traceback (most recent call last): File "/usr/local/lib/python2.7/site-packages/django/core/handlers/exception.py", line 39, in inner response = get_response(request) ... more stuff ... File "/usr/local/lib/python2.7/smtplib.py", line 747, in sendmail raise SMTPRecipientsRefused(senderrs) SMTPRecipientsRefused: {u'pacetechadmin(a)cetsi.com': (451, '4.3.0 <pacetechadmin(a)cetsi.com>: Temporary lookup failure')} On the Docker host (ubuntuServer2), /var/log/mail.log shows: Jul 12 13:48:53 ubuntuServer2 postfix/smtpd[19931]: error: open /opt/mailman/core/var/data/postfix_domains: No such file or directory Jul 12 13:48:53 ubuntuServer2 postfix/smtpd[19931]: error: open /opt/mailman/core/var/data/postfix_lmtp: No such file or directory Jul 12 13:48:53 ubuntuServer2 postfix/smtpd[19931]: connect from unknown[172.19.199.3] Jul 12 13:48:53 ubuntuServer2 postfix/trivial-rewrite[19843]: warning: regexp:/opt/mailman/core/var/data/postfix_domains is unavailable. open /opt/mailman/core/var/data/postfix_domains: No such file or directory Jul 12 13:48:53 ubuntuServer2 postfix/trivial-rewrite[19843]: warning: relay_domains: regexp:/opt/mailman/core/var/data/postfix_domains: table lookup problem Jul 12 13:48:53 ubuntuServer2 postfix/trivial-rewrite[19843]: warning: relay_domains lookup failure Jul 12 13:48:53 ubuntuServer2 postfix/trivial-rewrite[19843]: warning: regexp:/opt/mailman/core/var/data/postfix_domains is unavailable. open /opt/mailman/core/var/data/postfix_domains: No such file or directory Jul 12 13:48:53 ubuntuServer2 postfix/trivial-rewrite[19843]: warning: relay_domains: regexp:/opt/mailman/core/var/data/postfix_domains: table lookup problem Jul 12 13:48:53 ubuntuServer2 postfix/trivial-rewrite[19843]: warning: relay_domains lookup failure Jul 12 13:48:53 ubuntuServer2 postfix/smtpd[19931]: NOQUEUE: reject: RCPT from unknown[172.19.199.3]: 451 4.3.0 <pacetechadmin(a)cetsi.com>: Temporary lookup failure; from=<postorius(a)localhost.local> to=<pacetechadmin(a)cetsi.com> proto=ESMTP helo=<mailman-web> Jul 12 13:48:54 ubuntuServer2 postfix/smtpd[19932]: error: open /opt/mailman/core/var/data/postfix_domains: No such file or directory Jul 12 13:48:54 ubuntuServer2 postfix/smtpd[19932]: error: open /opt/mailman/core/var/data/postfix_lmtp: No such file or directory Jul 12 13:48:54 ubuntuServer2 postfix/smtpd[19932]: connect from unknown[172.19.199.3] Jul 12 13:48:54 ubuntuServer2 postfix/trivial-rewrite[19843]: warning: regexp:/opt/mailman/core/var/data/postfix_domains is unavailable. open /opt/mailman/core/var/data/postfix_domains: No such file or directory Jul 12 13:48:54 ubuntuServer2 postfix/trivial-rewrite[19843]: warning: relay_domains: regexp:/opt/mailman/core/var/data/postfix_domains: table lookup problem Jul 12 13:48:54 ubuntuServer2 postfix/trivial-rewrite[19843]: warning: relay_domains lookup failure Jul 12 13:48:54 ubuntuServer2 postfix/trivial-rewrite[19843]: warning: regexp:/opt/mailman/core/var/data/postfix_lmtp is unavailable. open /opt/mailman/core/var/data/postfix_lmtp: No such file or directory Jul 12 13:48:54 ubuntuServer2 postfix/trivial-rewrite[19843]: warning: regexp:/opt/mailman/core/var/data/postfix_lmtp lookup error for "root@localhost" Jul 12 13:48:54 ubuntuServer2 postfix/trivial-rewrite[19843]: warning: transport_maps lookup failure Jul 12 13:48:54 ubuntuServer2 postfix/smtpd[19932]: NOQUEUE: reject: RCPT from unknown[172.19.199.3]: 451 4.3.0 <root@localhost>: Temporary lookup failure; from=<root(a)localhost.local> to=<root@localhost> proto=ESMTP helo=<mailman-web> Jul 12 13:48:54 ubuntuServer2 postfix/smtpd[19932]: disconnect from unknown[172.19.199.3] ehlo=1 mail=1 rcpt=0/1 rset=1 quit=1 commands=4/5 Jul 12 13:48:54 ubuntuServer2 postfix/smtpd[19931]: lost connection after RSET from unknown[172.19.199.3] Jul 12 13:48:54 ubuntuServer2 postfix/smtpd[19931]: disconnect from unknown[172.19.199.3] ehlo=1 mail=1 rcpt=0/1 rset=1 commands=3/4 And /var/log/mail.err is filling up with: Jul 12 13:48:53 ubuntuServer2 postfix/smtpd[19931]: error: open /opt/mailman/core/var/data/postfix_domains: No such file or directory Jul 12 13:48:53 ubuntuServer2 postfix/smtpd[19931]: error: open /opt/mailman/core/var/data/postfix_lmtp: No such file or directory Jul 12 13:48:54 ubuntuServer2 postfix/smtpd[19932]: error: open /opt/mailman/core/var/data/postfix_domains: No such file or directory Jul 12 13:48:54 ubuntuServer2 postfix/smtpd[19932]: error: open /opt/mailman/core/var/data/postfix_lmtp: No such file or directory Any thoughts on what the problem is? Have I missed a step?

3 3

Confirm on mass subscription
by David Krantz July 7, 2017

July 7, 2017

Hi, Is there a way of requiring all mass subscribed users to confirm their email adress? I have an use case where we have a current mail list but when moving it to mailman I for different reasons would like to confirm all subscribers. Some very shallow testing suggests that if I just add them using mass subscribe, they will not have to confirm at all. I have yet to upgrade to 3.1 but I will do so in due time. cheers // David

3 2

Changing display name with "mailman withlist"
by Mark Ziranski July 5, 2017

July 5, 2017

Hello, I am looking for a way to change the display name of a mailing list on command line. As written in "mailman withlist --details" I have created a script named "change.py". When executing the script as written in the manual, I get the following error: (venv-3.5) [root@localhost mailman]# mailman withlist -r change example(a)example.org 'new display name' usage: mailman [-h] [-v] [-C CONFIG] {help,aliases,conf,create,digests,import21,info,inject,lists,members,qfile,remove,reopen,restart,shell,start,status,stop,unshunt,version,withlist} ... mailman: error: unrecognized arguments: new display name According to the manual it should be possible to pass arguments in withlist: mailman withlist [options] listname [args ...] while " mailman withlist -h" says: usage: mailman withlist [-h] [-i] [-r RUN] [--details] [LISTNAME] Mailman version: GNU Mailman 3.2.0a1 (La Villa Strangiato) Btw. I know that there is an interactive shell to execute the script but I need a solution that can be run in a shell script. Thank you.

2 1

Problem with docker and css
by Alexander Klotz July 5, 2017

July 5, 2017

Hi everyone, we are experiencing some issues trying to run mailman3 on our server. First, when starting docker-compose up -d the mailman-web container is not started. The log shows: mailman-web | useradd: user 'mailman' already exists If we start the container with docker-compose up (without -d), all containers start accurately. Are there other files integrated / processed when starting docker-compose up with -d? Secondly, no css and javascript-elements, as well as images are embedded in the web surface. In the mailman-web log we can see they aren't found (Error 404), but trying with docker-compose exec -T mailman-web ls /opt/mailman-.../static/.../... they actually can be found. Can anybody tell me why these problems appear and how to solve them? Any help would be highly appreciated. Thanks & Regards, Alex Klotz (culturebase editorial staff)

3 6

Found error in docker-container
by Alexander Klotz July 5, 2017

July 5, 2017

Hi, one of our developers wanted to point out an error he found in mailman 3.1, docker container maxking/mailman-core-0.1 The entries in /opt/mailman/core/var/data/postfix_lmtp are not set correctly, example: /^testlist(a)mailman\.example\.com$/ lmtp:[172.19.199.2# IP Address of mailman-core container]:8024 this actually should look like this: /^testlist(a)mailman\.example\.com$/ lmtp:[172.19.199.2]:8024 Regards, Alex

1 0

REST API notes
by tlhackque＠yahoo.com June 29, 2017

June 29, 2017

As a beginner with the REST API, I found it necessary to read code and experiment to figure out how to get things done. There are a number of implementation choices that are unusual. There is some documentation in src/mailman/rest/docs. It's oriented toward Python and intermixes the mailman client & REST API, apparently trying to show equivalence. Here are some notes that may help others to avoid repeating my research. They reflect Mailman 3.1. Some reflect issues that I've opened, but I think it's worth knowing how things work today. I attempted to tie together some of pieces that are in the documentation - and note some things that aren't. I may have some things wrong, but this reflects my current understanding. (And client code.) The REST API has a hybrid interface: Requests are made with application/x-www-form-urlencoded POST, PUT, PATCH and delete http requests. Requests are also accepted as parameter strings. The responses are JSON. (This is rather surprising - one would expect JSON requests - and I hope someday they'll be accepted, as the split complicates clients. I suspect this evolved to simplify the initial Web GUI client (Postorious), but it precludes using standard JSON-in/JSON-out client libraries.) Error responses are often misidentified as content-type: application/json, but actually contain a text/plain error message. This isn't universally true; for example the 401 response actually IS JSON. A client has to guess and handle decoding exceptions. The API presents resources hierarchically, rooted at '/'. The top level resources include /users, /lists. /addresses, /domains, /system The next level is a resource id. There is a an id which is stable for the lifetime of an object, and a current name (which can be changed). For example, a list has a name like mylist(a)example.com, and a list_id of mylist.example.com. But if you change the list name, it becomes mynewname(a)example.net, while the list_id remains mylist.example.com. Lists are associated with "domains", which are the "domain part" of the list's address. That is, the part after the @. This is sometimes referred to as the "mail host", but there need not be a real host. Just something on the left side of a DNS MX record. Also, don't confuse the use of "mail host" with that of "SMTP Server", which is how Mailman sends mail. The domain is where Mailman expects to receive it. A fully qualified list name is the list name + domain - e.g. its posting address. One domain can (and usually does) support more than one list. If you delete the domain, all its lists go away too. A domain has to be created before you can create a list with an address in that domain. Resources are created with a POST to their top-level resource. To create a domain, post to /domains with mail_host => the domain, and (optionally) description => a description for the GUI. The response isn't JSON as one would expect. In fact, it's an empty application/json response with a 201 status. To create a list, one POSTs to /lists. This post takes a restricted set of parameters; in the case of a list, just its fqdn_listname, (and an optional style - which isn't well defined). The response isn't JSON as one would expect. The Location header of the response contains a URL of the new list. To configure the list, you have to follow up with a PUT or PATCH to that URL + /config This is where you can set the description, posting policy, etc. It's unrealistic to do a PUT; even if you're cloning another list, there's no programatic way to determine which attributes are writable. PATCH what you know... Members are associated with e-mail addresses - which belong to Users. You create a user by posting to /users with email => the email address, and optionally display_name => the name string. (A user can also be implicitly created by subscribing an e-mail address, but that gets confusing.) The e-mail address is the primary email address for the user. More later. Again, you get a Location header in the response, which you can use to PATCH /preferences to set delivery_status, etc. .These preferences are part of a hierarchy - many have a system default, a list default, the user default, and a subscription to that list value. You can find the User associated with a list by a GET of /addresses/address(a)example.net. This GET returns two URLs: user => the user owning this address, and self_link => the address object. Note also that there are both an email and original_email attribute. The latter preserves case. The former is used internally by Mailman as a resource key, etc. (Though exactly what happens if John(a)example.net and john(a)example.net both subscribe is unclear.) Once a list is configured, you can add members. This requires the list_id - which you don't (officially) have. So you do a GET on the list resource, to get the list_id. Then you can subscribe a member with list_id => (the list id), subscriber => email address. Optionally you can pre_verify/confirm/approve the member and/or add a display_name.. POST to /members. Again, you get a Location header back. You can't specify everything you might like. as a creation attribute. So you may have to PATCH the member to, for example, set the moderation_status. You may also need to PATCH the member /preferences if you want to set list-level delivery status, etc. Consider adding at least an owner when creating a list. One challenge is that almost everything requires multiple REST operations to set up. But REST (by definition) is stateless. So the best you can do is order operations & hope. The mailman client examples refer to transactions (e.g in users.rst, there is 'transaction.commit(); - but REST can't hold state. It does appear that the server uses DB transactions to ensure that any given REST operation is ACID, but the composite operations (e.g. create a list and set it's config) can not be Atomic. This is an architectural flaw in the API. Symbolic names (which are required) for attributes are in the src/mailman/interfaces/(class).py. What you can get/set comes from src/mailman/rest/(class).py.

3 2

Some doc updates from Fedora install experience
by tlhackque＠yahoo.com June 26, 2017

June 26, 2017

Trying to get mailman3 setup round three. Some notes from a first timer that I hope will be of use. These are in order of experience, and unfiltered. I'm a bit confused about why you have a release that pip should be able to install, but the advice I get is to pretend I'm developing from git. But off we go: Following http://docs.mailman3.org/en/latest/devsetup.html: I'm using Fedora 25. Packaged Python is 2.7.13-2, 3.6.3-6, 2-setuptools 25.1.1-1, 2-virtualenv 15.0.3-2 nodejs-less 2.7.1-1 sassc 3.4.1-1 a) fedora now uses dnf rather than yum (and has for some time). Specify dnf install rather than yum install b) sassc is packaged - just add it to the end of the dnf install string. I'm using sendmail. Directly outbound. Inbound, a custom LMTP client. It is possible to setup sendmail to use LMTP for local delivery - but if you do, it's the ONLY local delivery (or you're into some serious sendmail configuration hacking). Most installations use procmail and/or pipes. I could probably extract a pipe -> lmtp script from my project - but it's Perl, not Python. The current install process assumes a lot of Python knowledge/interaction, which is a barrier to adoption. Documentation should note that the virtualenv commands create directories of those names (I'm not a Python person, so everything is a surprise.) To save typing, I defined: alias p0='[ -n "$_OLD_VIRTUAL_PATH" ] && deactivate;cd ~mailman3' alias p2='[ -n "$_OLD_VIRTUAL_PATH" ] && deactivate;cd ~/mailman3 && source venv-2.7/bin/activate' alias p3='[ -n "$_OLD_VIRTUAL_PATH" ] && deactivate;cd ~/mailman3 && source venv-3.5/bin/activate' I suggest using mailman3 as the top level in your examples, since there's also a mailman directory in the path, and mailman is easily confused with mailman/mailman Also, if you have mailman2 - or your distro has provision for it - 'mailman' has other semantics. (Including, but not limited to things like SeLinux contexts...) I got tracebacks when I got to the "mailman info" command. After some experimentation/digging, resolved with dnf install python3-dateutil This was confusing because Python/pip seemed to think dateutil was installed - perhaps it fell back to the Python2 version? mailman info works! >> You can edit your mailman.cfg file But which one? there's one in src/mailman/config and one in var/etc/mailman.cfg. Should specify. But var looks like the one to modify, the other. The suggestion to look at the one in src for doc isn't very helpful, there are virtually no comments. So, look at the schema. To get started, I set the following: [mailman] site_owner: admin(a)example.net [devmode] enabled: yes [mta] smtp_host: smtp.example.net smtp_port: 587 #smtp_user: #smtp_pass: lmtp_host: 192.168.148.19 lmtp_port: 8024 ### Note: LMTP needs security, preferably SSL.. Thiis is probably a bunch of config items that get fed into the Python library (e.g. use ssl, cert files (current openssl includes key w/cert, but often multiple certs - rsa + ecdsa) verify client, ca bundle, ca path, client ca.) Despite the list, these are all pass-through parameters, so should not be much work. Once you have SSL, a simple shared secret (e.g. password) can be used. Or (my preference) client verification (certificate). Maybe a proxy, but who needs another process to manage? FWIW, my MTA runs on a separate VM from the MM instance, so assuming "localhost" is secure doesn't work. It also doesn't work on a multiuser machine. mailman start got some things running. Telnet & LHLO wakes up LMTP! I guess I should try to setup my first list. More as it develops.

3 6

Mailman 3 Container Images v0.1
by Abhilash Raj June 26, 2017

June 26, 2017

Hi Everyone, I have been working on containerizing Mailman 3 so that it becomes easier to test and try Mailman 3. There are two images in total: * maxking/mailman-core : This consists of Mailman Core and includes the plugin to enable the Hyperkitty Archiver. * maxking/mailman-web : This consists of a full Django installation and run the Mailman's Web UI components. It has Mailman Client, Postorius & Hyperkitty. The images are built from the Dockerfiles hosted on Github[3] in case you want to look at it. You can find most of the documentation about these images at https://asynchronous.in/docker-mailman/. The version of the internal components included in each image is available here[7]. The images are versioned and the process is documented[4], please have a look before you use them. Also, the images are signed and I encourage you to verify them before using. The process of how-to verify is also documented. Docker Compose is a tool written in Python makes is very easy to deploy connected-images and take the pain out of writing long long commands for spinning of containers. There is a sample `docker-compose.yml` file in the Github repository mentioned above which is kind-of tested to be able to spin off these images in vanilla condition (without any customization/configuration). You can report issues, comments or concerns in the Github repo[6]. [1]: https://hub.docker.com/r/maxking/mailman-core/ [2]: https://hub.docker.com/r/maxking/mailman-web/ [3]: https://github.com/maxking/docker-mailman [4]: https://asynchronous.in/docker-mailman/#release [5]: http://semver.org/ [6]: https://github.com/maxking/docker-mailman/issues [7]: https://github.com/maxking/docker-mailman/wiki -- thanks, Abhilash Raj

1 0

API Question: map list -> UI URL?
by tlhackque＠yahoo.com June 24, 2017

June 24, 2017

Using the REST API, how do I get from a list / list configuration to the URL of the management GUI? I've looked through the data returned by the API and even the SQL schemas; I don't see the path. Am I missing something, or do I need to log an issue for this? I'm not particularly interested in the subscriber pages, but it ought to be possible to get there too... Thanks.

1 0

Topics? First bug...
by tlhackque June 21, 2017

June 21, 2017

Hi, I'd like to deploy a new project on Mailman 3, which I prototyped on 2.1). Unfortunately, it's organized as one mailing list with ~ 120 topics. (The project follows another source, and it's much easier to spin up (or down) a new topic than to instantiate & manage a new list.) I see that the latest Mailman 3 release (Congrats!) doesn't support topics yet. Where is that on your todo list? First bug: Looking at https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/. If I set "results per page" to a large number & switch months, results per page reverts to the default (10). It should stick with whatever I select... It also would be nice to have an account preference for this, so it doesn't have to be set on each visit.

2 2

Re: Http/Https
by Abhilash Raj June 15, 2017

June 15, 2017

Excerpts from Simon HANNA's message of June 14, 2017 1:06 pm: > You are supposed to force https in the webserver, serving postorius and hyperkitty. Especially in postorius almost all pages contain sensitive information. > > On June 14, 2017 10:05:59 PM GMT+02:00, Bill <bill3(a)uniserve.com> wrote: >>Hi folks, >> >>We're setting up Mailman 3.1 and so far installation has been good and >>we're now in the testing phase. >> >>We've run into a snag with the account signup function on Postorius. >> >>When Postorius sends an email to the user to confirm their address, it >>displays a link using the https protocol. This doesn't work. But, if we >> >>manually change the protocol to http it will work, confirm the address >>and take us back to Postorius. >> >>Is this a known bug or have we committed a configuration error? I agree to Simon's suggestion that you should use HTTPS for all communications for Postorius. However, if you really want to, it is possible to change the behavior using a configuration parameter in django-allauth which is what controls the user signup and email verification. ACCOUNT_DEFAULT_HTTP_PROTOCOL (=”http”) If you set the above to "http" in your django's settings.py, it should then generate urls with http. [1]: https://django-allauth.readthedocs.io/en/latest/configuration.html Message-ID: <draft-878tktptc9.fsf(a)gmail.com> Date: Thu, 15 Jun 2017 01:07:18 -0700 X-Notmuch-Emacs-Draft: True -- thanks, Abhilash Raj

1 0

Http/Https
by Bill June 14, 2017

June 14, 2017

Hi folks, We're setting up Mailman 3.1 and so far installation has been good and we're now in the testing phase. We've run into a snag with the account signup function on Postorius. When Postorius sends an email to the user to confirm their address, it displays a link using the https protocol. This doesn't work. But, if we manually change the protocol to http it will work, confirm the address and take us back to Postorius. Is this a known bug or have we committed a configuration error? All assistance appreciated. Bill -- Sent using Icedove on Debian GNU/Linux.

2 1

Re: "Private archives" aren't private
by Simon Liebold June 6, 2017

June 6, 2017

Am 06.06.2017 um 22:25 schrieb Abhilash Raj: > Excerpts from Simon Liebold via Mailman-users's message of June 6, > 2017 1:20 pm: >> >> AttributeError: type object 'BaseCommand' has no attribute >> 'option_list' > > It was reported recently on the bug tracker, you can track the > progress here[1]. > > > [1]: https://gitlab.com/mailman/hyperkitty/issues/135#note_31529582 Thanks Abhilash for the pointer. Simon

1 0

(Email|Thread) matching query does not exist ?
by Simon Liebold June 6, 2017

June 6, 2017

I am seeing these errors: mailman-suite_project$ python manage.py qcluster 19:27:52 [Q] INFO Q Cluster-11541 starting. 19:27:52 [Q] INFO Process-1:1 ready for work at 11546 19:27:52 [Q] INFO Process-1:2 ready for work at 11547 19:27:52 [Q] INFO Process-1 guarding cluster at 11545 19:27:52 [Q] INFO Process-1:4 pushing tasks at 11549 19:27:52 [Q] INFO Q Cluster-11541 running. 19:27:52 [Q] INFO Process-1:3 monitoring at 11548 19:27:52 [Q] INFO Process-1:1 processing [rebuild_email_cache_votes] 19:27:52 [Q] INFO Process-1:2 processing [rebuild_thread_cache_votes] 19:27:52 [Q] INFO Process-1:1 processing [rebuild_email_cache_votes] 19:27:52 [Q] ERROR Failed [rebuild_email_cache_votes] - Email matching query does not exist. 19:27:52 [Q] ERROR Failed [rebuild_email_cache_votes] - Email matching query does not exist. 19:27:52 [Q] ERROR Failed [rebuild_thread_cache_votes] - Thread matching query does not exist. Should I need to worry? I recently deleted some test emails from the archive. Don't know if this has anything to do with it. Simon

1 0

"Delete this thread" -> 'HTTP-500 -> NoneType' object has no attribute 'all'
by Simon Liebold May 30, 2017

May 30, 2017

Is deleting threads from the archive (via Hyperkitty) currently supported? I am getting the error indicated above if I click on "Delete this thread". Is there another way to delete whole threads or individual posts? Simon

3 7

Editing "automatic responses" tab i Postorius does not work
by David Krantz May 26, 2017

May 26, 2017

Hi, I am trying to change e.g. the value of "notify admin on membership changes" through postorius. This is not possible as I have no URLs for the various templates (all templates are using defaults stored on the server). Is this something that can be circumvented or fixed? I can of course change admin_notify_mchanges in the "mailman withlist" interface, but this is less than ideal. best regards // David

2 4

ANNOUNCE: Mailman 3.1.0 final!
by Barry Warsaw May 26, 2017

May 26, 2017

Hello Mailpeople! On behalf of the entire team and all our wonderful contributors, I'm happy to announce the release of GNU Mailman 3.1 final. My deep thanks go to all the Mailman project sprinters at Pycon 2017 for getting us over the line! Two years after the original release of Mailman 3.0, this version contains a huge number of improvements across the entire stack. Many bugs have been fixed and new features added in the Core, Postorius (web u/i), and HyperKitty (archiver). Upgrading from Mailman 2.1 should be better too. We are seeing more production sites adopt Mailman 3, and we've been getting great feedback as these have rolled out. Important: mailman-bundler, our previous recommended way of deploying Mailman 3, has been deprecated. Abhilash Raj is putting the finishing touches on Docker images to deploy everything, and he'll have a further announcement in a week or two. Feedback is welcome: https://github.com/maxking/docker-mailman What is GNU Mailman? GNU Mailman is free software for managing electronic mail discussion and e-newsletter lists. Mailman is integrated with the web, making it easy for users to manage their accounts and for list owners to administer their lists. Mailman supports built-in archiving, automatic bounce processing, content filtering, digest delivery, and more. Mailman 3 is released under the terms of the GNU General Public License, version 3. The best places to start for all things related to this release: http://docs.mailman3.org/ http://www.list.org/ https://gitlab.com/mailman (Note: due to timezone skew, some of the tarballs may not be available on PyPI until tomorrow.) Happy Mailman Day, -Your friendly neighborhood cabal An overview of what's new in Mailman 3.1 ======================================== Feature parity with Mailman 2.1 ------------------------------- * You should be able to do just about everything that you could do in Mailman 2.1 *except* for topics and sibling/umbrella lists. Core ---- * Added support for Python 3.5 and 3.6 * MySQL is now an officially supported database * Many improvements with importing Mailman 2.1 lists * DMARC mitigations have been added, based on, but different than the same feature in Mailman 2.1 * The REST API requires HTTP/1.1 * A new REST API version (3.1) has been added which changes how UUIDs are interpreted, fixing the problem for some JavaScript libraries * Many new REST resources and methods have been added * Individual mailing lists can augment the system's header matching rules * `mailman create` now creates missing domains by default * `mailman digests` now has `--verbose` and `--dry-run` options * `mailman shell` now supports readline history * `mailman members` can filter members based on their subscription roles * A new template system has been added for all messages originating from inside Mailman. * The Message-ID-Hash header replaces X-Message-ID-Hash * New placeholders have been added for headers and footers * Unsubscriptions can now be confirmed and/or moderated Postorius/HyperKitty -------------------- * General U/I and U/X improvements * Many more features from the Core's have been plumbed through * We've adopted Django social auth logins and dropped Persona (since it's no longer supported upstream). You can now log in via Facebook, Google, GitHub, and GitLab. Backward incompatibilities -------------------------- * Core/REST: Held message resources now have an `original_subject` key that is not RFC 2047 decoded. `subject` is now RFC 2047 decoded. * Core/REST: If you've run pre-release versions from git head, and stored welcome and goodbye templates via REST, the template key names have changed backward incompatibility.

2 1

Multiple header_checks in mailman.cfg. How?
by Simon Liebold May 20, 2017

May 20, 2017

Hello, What is the correct syntax if I wanted to perform multiple header checks? header_checks: X-Spam: (yes|maybe) header_checks: x-another-header: (some|any)thing or: header_checks: X-Spam: (yes|maybe) x-another-header: (some|any)thing or: header_checks: ['X-Spam: (yes|maybe)', 'x-another-header: (some|any)thing'] Or something completely different? I don't think it is the first two because "mailman conf -s antispam" shows only a single header_checks. But the 3rd variant doesn't work either. Simon Hello, What is the correct syntax if I wanted to perform multiple header checks? header_checks: X-Spam: (yes|maybe) header_checks: x-another-header: (some|any)thing or: header_checks: X-Spam: (yes|maybe) x-another-header: (some|any)thing or: header_checks: ['X-Spam: (yes|maybe)', 'x-another-header: (some|any)thing'] Or something completely different? I don't think it is the first two because "mailman conf -s antispam" shows only a single h= eader_checks. But the 3rd variant doesn't work either. Simon

2 1

Character set for postorius
by David Krantz May 18, 2017

May 18, 2017

Hi, I'd like to have my descriptions of maillists with the correct characters for my languages... Where is the character set for this determined? If I input e.g. 'è' (è) or 'ö' (ö) it is substituted with a '?'. Of course the html entities are not allowed either, the ampersand '&' is escaped somewhere between output and input. Cheers // David

2 1

HyperKitty needs regis, really?
by Simon Liebold May 15, 2017

May 15, 2017

Hi I am seeing a whole bunch of error messages in mailmansuite.log whenever a new message is sent to be archived: ERROR 2017-05-14 15:41:41,261 13634 django.request Internal Server Error: /hyperkitty/api/mailman/archive ... File "/opt/mailman/venv-2.7/local/lib/python2.7/site-packages/redis/connection.py", line 442, in connect raise ConnectionError(self._error_message(e)) ConnectionError: Error 111 connecting to localhost:6379. Connection refused. I didn't see this mentioned anywhere. Does HyperKitty need a running regis server to work? What am I missing? Simon

2 2

So, why are css & js files only served with "DEBUG = yes" ?
by Simon Liebold May 7, 2017

May 7, 2017

Hello List, I did see this discussed in #180 <https://gitlab.com/mailman/postorius/issues/180>, but I didn't quite understand if this is an issue or not. Why is it that I can run the development server just fine. [07/May/2017 13:23:47] "GET /static/postorius/libs/bootstrap/css/bootstrap.min.css HTTP/1.1" 304 0 [07/May/2017 13:23:47] "GET /static/postorius/css/style.css HTTP/1.1" 304 0 [07/May/2017 13:23:47] "GET /static/postorius/libs/bootstrap/js/bootstrap.min.js HTTP/1.1" 304 0 [07/May/2017 13:23:47] "GET /static/django-mailman3/js/main.js HTTP/1.1" 304 0 [07/May/2017 13:23:47] "GET /static/postorius/libs/jquery/jquery-1.11.3.min.js HTTP/1.1" 304 0 [07/May/2017 13:23:47] "GET /static/django-mailman3/css/main.css HTTP/1.1" 304 0 [07/May/2017 13:23:47] "GET /static/postorius/js/script.js HTTP/1.1" 304 0 [07/May/2017 13:23:47] "GET /static/postorius/img/mailman_logo_small_trans.png HTTP/1.1" 304 0 And as soon as I comment out # SECURITY WARNING: don't run with debug turned on in production! # DEBUG = True in mailman-suite/mailman-suite_project/settings.py and restart it 404s on me. [07/May/2017 13:41:36] "GET /static/postorius/libs/bootstrap/css/bootstrap.min.css HTTP/1.1" 404 127 [07/May/2017 13:41:36] "GET /static/django-mailman3/css/main.css HTTP/1.1" 404 109 [07/May/2017 13:41:36] "GET /static/postorius/css/style.css HTTP/1.1" 404 104 [07/May/2017 13:41:36] "GET /static/django-mailman3/js/main.js HTTP/1.1" 404 107 [07/May/2017 13:41:36] "GET /static/postorius/libs/bootstrap/js/bootstrap.min.js HTTP/1.1" 404 125 [07/May/2017 13:41:36] "GET /static/postorius/libs/jquery/jquery-1.11.3.min.js HTTP/1.1" 404 123 [07/May/2017 13:41:36] "GET /static/postorius/js/script.js HTTP/1.1" 404 103 [07/May/2017 13:41:36] "GET /static/postorius/img/mailman_logo_small_trans.png HTTP/1.1" 404 123 So the choice is insecure vs. ugly? Neither of those sounds very tempting. I guess, I am missing something, or no? Simon

3 3

reason for breaching max_message_size is "N/A"
by David Krantz May 1, 2017

May 1, 2017

Hi. Today I learned to things: The default max_message_size is 40kB. Messages larger than that are blocked (expected) with the reason "N/A" (not expected). The reason would be helpful to me as admin. Also: Is there any way to set a server default for this as it is a bit of a hassle to change it from the command line for each new list. I can of course find where in the code to change but that seems the wrong way to me. Cheers // David

2 1

Any good ideas on how to troubleshoot django allauth
by David Krantz April 27, 2017

April 27, 2017

Hi again. Allauth works for me... sometimes... For google logins it works most of the time. For facebook it almost never works. When it does not work, I get an error page with the error "An error occurred while attempting to login via your social network account." (or the equivalent in my locale). If I then reload the page, I get logged in! In some cases I get the error and the little green popup saying that I am logged in at the same time. Strange. So... If there is any documentation for how to set up or how to troubleshoot django allauth I am all ears (eyes, really). I have tested the "missing howto..." and updated version of that without enough success. Cheers // David The only thing I find is in the Apache log: (I have removed all cryptovalues and other things that should be uninteresting to others) [LOCAL_IP] - - [19/Apr/2017:00:00:39 +0000] "GET /accounts/facebook/login/?process=login&next=%2Farchives%2F HTTP/1.1" 302 706 "https://lists.example.com/accounts/login/?next=/archives/" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/52.0.2743.116 Safari/537.36 Edge/15.15063" [LOCAL_IP] - - [19/Apr/2017:00:00:53 +0000] "GET /accounts/facebook/login/callback/?code=[LONG CRYPTO-LOOKING STRING] HTTP/1.1" 200 2129 "https://www.facebook.com/login/reauth.php?app_id=[MY_APP_ID_I_THINK]&signed…" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/52.0.2743.116 Safari/537.36 Edge/15.15063"

3 5

Patch/kludge suggestion and a question on adding accepted addresses
by David Krantz April 25, 2017

April 25, 2017

Hi. I found out that I had a broken email in one of my held messages queues). That gave a HTTP 500 error although that should be fixed . After some digging I found out that where the error occured. I'd suggest adding a catch for AttributeError similar to the one for KeyError in _HeldMessageBase in rest/post_moderation.py. It solved my immediate problem at least. I run the version from git with the tag 263711b3b7988c7c474e3b8952dc7e0f02f04fa2 The message causing this was probably one where I had sent a minimal email via telnet to the SMTP port and forgot the MessageID-header or something similarily silly. But it prevented me from seeing the held messages-list in postorius. I have another question: In the old mailman you could add accepted senders without adding them to the list. Is that possible in Mailman 3/Postorius? cheers. // David

3 3

502 Bad Gateway??? Trying to change stuff
by am April 23, 2017

April 23, 2017

I am trying to change my email address, but forgot password. The screen for reset gets 502 Bad Gateway ------------------------------ nginx/1.4.6 (Ubuntu) any way someone can fix this????

2 2

Remove footer link
by David Terni April 23, 2017

April 23, 2017

Hi, I need to remove footer message like "to unsubscribe etc etc" from all lists. How i can do it or edit text? Thanks alot for any suggestion. David

2 1

Fwd: Incoming command emails (i.e. listname-leave) routed to list itself
by Abhilash Raj April 22, 2017

April 22, 2017

Hi Mark, Excerpts from Mark Lindsay's message of April 20, 2017 5:37 pm: <snip> Here are some baffling lines from /var/log/exim4/mainlog from the incoming > potato-leave(a)lists.mydomain.org email: > > 2017-04-21 00:25:03 1d1MNj-0007OQ-5r DKIM: d=nervous-org.20150623. > gappssmtp.com s=20150623 c=relaxed/relaxed a=rsa-sha256 [verification > succeeded] > 2017-04-21 00:25:03 1d1MNj-0007OQ-5r <= redacted(a)nervous.org H= > mail-qk0-f170.google.com [209.85.220.170] P=esmtp S=2466 id= > CABPy5zyQtJHXtCgrN37GHCUOjuo3J=DO_j0ZD03zm8gk+4shww(a)mail.gmail.com > 2017-04-21 00:25:03 1d1MNj-0007OQ-5r => potato(a)lists.mydomain.org < > potato-leave(a)lists.mydomain.org> R=mailman3_router T=mailman3_transport > H=localhost [127.0.0.1] C="250 Ok" > 2017-04-21 00:25:03 1d1MNj-0007OQ-5r Completed > > Why does it say `potato(a)lists.mydomain.org <potato-leave(a)lists.mydomain.o > rg > >> `? >> > > I think this is actually an exim4 problem, so if the solution is to just > switch to postfix, then I will definitely do that. But I'm just asking in > case someone had a similar issue with exim4 and was able to work through > it. > > Yes, I had the exact same problem very recently and was able to fix it. The updated documentation[1] should fix your problem. The basic gist of the problem is that the exim configuration on the older documentation is missing a critical part. Exim4 by default strips off any prefixes/suffixes when delivering mail to the mailman, which causes mailman to post all the messages to mailing list instead of processing them as commands. `rcpt_include_affixes = true` Adding the above line to the transport fixes that problem. [1]: https://mailman.readthedocs.io/en/latest/src/mailman/docs/mt a.html#exim4-configuration thanks, Abhilash

3 2

Incoming command emails (i.e. listname-leave) routed to list itself
by Mark Lindsay April 21, 2017

April 21, 2017

Hi mailman-users, I'm new to Mailman 3 and Mailman in general, but I've got it up and running, and my external app is communicating quite well with the administrative REST API. Here's the only problem I haven't been able to figure out: Say I have a list called "potato." List members can post to the list by emailing potato(a)lists.mydomain.org. This works fine. However, incoming mail for command addresses (e.g. potato-leave(a)lists.mydomain.org) is routed to the list too. The command email gets sent out to all members, as if the user who wanted to unsubscribe had just written to potato(a)lists.mydomain.org. This is also the case with the potato-request(a)lists.mydomain.org address. I am using exim4 on Ubuntu. I followed the instructions here: http://mailman.readthedocs.io/en/release-3.0/src/mailman/docs/MTA.html. The only change I had to make to the exim4 config files in the readthedocs instructions was in this line: MM3_LISTCHK=MM3_HOME/lists/${local_part}@${domain} I had to change it to: MM3_LISTCHK=MM3_HOME/lists/${local_part}.${domain} That is how the subdirectories are named in my lists directory. e.g. potato.lists.mydomain.org. If I use the exact MM3_LISTCHK value from readthedocs, I get 550 Unrouteable bounces. Here are some baffling lines from /var/log/exim4/mainlog from the incoming potato-leave(a)lists.mydomain.org email: 2017-04-21 00:25:03 1d1MNj-0007OQ-5r DKIM: d=nervous-org.20150623. gappssmtp.com s=20150623 c=relaxed/relaxed a=rsa-sha256 [verification succeeded] 2017-04-21 00:25:03 1d1MNj-0007OQ-5r <= redacted(a)nervous.org H= mail-qk0-f170.google.com [209.85.220.170] P=esmtp S=2466 id= CABPy5zyQtJHXtCgrN37GHCUOjuo3J=DO_j0ZD03zm8gk+4shww(a)mail.gmail.com 2017-04-21 00:25:03 1d1MNj-0007OQ-5r => potato(a)lists.mydomain.org < potato-leave(a)lists.mydomain.org> R=mailman3_router T=mailman3_transport H=localhost [127.0.0.1] C="250 Ok" 2017-04-21 00:25:03 1d1MNj-0007OQ-5r Completed Why does it say `potato(a)lists.mydomain.org <potato-leave(a)lists.mydomain.org >`? I think this is actually an exim4 problem, so if the solution is to just switch to postfix, then I will definitely do that. But I'm just asking in case someone had a similar issue with exim4 and was able to work through it. Thanks a lot, Mark

2 1

Memory footprint
by David Krantz April 19, 2017

April 19, 2017

Hi. Now running mailman 3 I am a bit surprised that the memory footprint is so large. I count to 13 processes with each a virtual space of 160-250MB and a reserved space of about 50MB each. Not much, but quite much to run on smaller cloud instances which generally have limited memory. This is (a lot) more than the corresponding postgres installation uses, Is this normal? regards // David

6 6

Installing MM3 requires Django<1.11
by Henrik Rasmussen April 12, 2017

April 12, 2017

Two questions regarding Mailman 3 installation: 1) The Mail server setup at http://docs.mailman3.org/en/latest/devsetup.html#set-up-a-mail-server isn't described yet. Instead it refers to https://docs.djangoproject.com/en/1.10/topics/email/#topic-email-backends, but it doesn't say which file I have to change. According to https://www.webforefront.com/django/setupdjangoemail.html the file is called settings.py, but the only settings.py I can find at this stage is the /opt/mailman/postorius/example_project/settings.py file. According to http://docs.mailman3.org/en/latest/devsetup.html#set-up-and-run-postorius, "Postorius and HyperKitty both come with example_project directories with basic configuration so you can try them out. For this tutorial, however, we'll be using a project that combines both instead.". In what file should I change the mail settings then? 2) While installing Hyperkitty*) I got the error message "Django 1.11rc1 is installed but Django<1.11 is required by {'django-haystack'}". As I have slavishly followed the installation guide including http://docs.mailman3.org/en/latest/devsetup.html#set-up-django-mailman3, I wonder why a non-supported Django version was installed. *) http://docs.mailman3.org/en/latest/devsetup.html#set-up-and-run-hyperkitty Regards Henrik

2 1

Dockerizing Wordpress with Nginx and PHP-FPM on Ubuntu 16.04
by ddw David Wilson April 12, 2017

April 12, 2017

Barry et al; Does the link below provide a model for a complete flexible integrated Docker based install package for Mailman3? Any other progress that might suggest an easier road to enlightenment? Best regards. Dave Wilson https://www.howtoforge.com/tutorial/dockerizing-wordpress-with-nginx-and-ph…

2 1

Deploying mailman3 using containers
by Abhilash April 10, 2017

April 10, 2017

Hi All, I have been working for the past two weeks on trying to create a solution to easily deploy Mailman 3 in production. For those interested, you can find the instructions about how to use my work at http://asynchronous.in/docker-mailman/. I have tried to document the process as much as possible. This is still a work in progress, but I have a working deployment[1] using these containers. I try to keep the deployment updated with the github repo, but there is no automated deploy happening there so sometimes it gets out of sync. While this is aimed to finally become a production ready method to deploy mailman 3, it is still not there. All I can say at this point is that it works. I have tried my best to document everything and I keep updating the documentation whenever I feel anything needs more clarity. I would love some feedback to improve the process or documentation. You can open issues on the github repo[2]. Currently, container images are built from the master branch of the gitlab repos and are thus not branded as stable. I am waiting for 3.1 release to add a stable tag to the images. [1]: https://mail.araj.me/ [2]: https://github.com/maxking/mailman -- thanks, Abhilash Raj

1 0

Mailman 3 api php
by david.terni＠gmail.com March 27, 2017

March 27, 2017

Hi, I apologize if this is't the right place but I don't understand how connect mailman 3 with api and php/CURL. It's possibile to do it? I tried to use the same url used with mailman2 but doesn't work. Someone can help me? Thank's a lot

2 2

How to set up mailman 3
by David Krantz March 26, 2017

March 26, 2017

Hi. I have tried and failed to set up mailman 3 using the mailman_bundle. I get the mailman3 server running correctly, but the problem is the extremely sensitive web user interface... Now when I found this mail list I understand that mailman bundle is depricated and that I must restart from scratch. Is this true? This annoys me quite a lot, can someone responsible within the project please mark the deprecated package as such? Almost none of the documentation is completely correct. It is useful but very incomplete. The mailman_bundle generated configuration examples for e.g. apache simply is wrong or incomplete. That said I got it running using http only, but when I switched to HTTPS the login simply ceased working. I use password+username as the other solution is quite complicated to get running. I could of course switch to e.g. google login, but that would require at least some documentation on how to do that. So, is there any documentation on how to use mailman 3? The error I get now is "Please enter a correct username and password. Note that both fields may be case-sensitive." I know that I enter the correct password as it worked before I added HTTPS. Sorry for the rant, but I am very annoyed by this. I just need a mail list server that works and thought it would be very neat to run mailman3 after running a hoste mailman2 for many years. Best regards // David

4 5

Re: Mm3 - new adventure
by SP2L March 15, 2017

March 15, 2017

Hello Mark. On 14/03/17 18:29, Mark Sapiro wrote: > mailman-bundler is out of date and deprecated. You might find > <https://wiki.list.org/x/17891998> of interest. I appreciate prompt response, indeed. Will follow your suggestion verbatim - thank you. I read this too: http://docs.mailman3.org/en/latest/#documentation And yes, I ran: bin/mailman-post-update python manage.py migrate and some more. Best regards -- Tom - SP2L ------------------------------------ It is nice to be important. But it is more important to be nice!

2 3

Mm3 - new adventure
by SP2L March 14, 2017

March 14, 2017

Greetings. I have up&running Mailman-2.1.23 on my web site. Lately started adventurous journey with Mailman3 which is way, way different already from the beginning. Used Mailman bundler to install GNU Mailman, Postorius and HyperKitty testing instance in virtual environment, mainly relaying on belows recipe: https://gitlab.com/mailman/mailman-bundler/ Present status. Above trio and MySQLServer are "talking" to each other but because there isproper database on MySQLServer I am facing strange and unexpected issues, Hi! Executing last two commands: (venv)$ ./bin/mailman start (venv)$ ./bin/mailman-web-django-admin runserver 0.0.0.0:8000 & I see Postorius and HyperKitty up & runningbut... Belowvery condensed messages from the console: /HyperKitty/ DEBUG = False [12/Mar/2017 18:59:43] "GET /archives/ HTTP/1.1" 200 8002 WARNING Not Found: /static/hyperkitty/libs/jquery/smoothness/jquery-ui-1.10.3.custom.min.css WARNING Not Found: /static/hyperkitty/libs/jquery/smoothness/jquery-ui-1.10.3.custom.min.css WARNING Not Found: /static/hyperkitty/libs/font-awesome/css/font-awesome.min.css WARNING Not Found: /static/CACHE/css/cbbaa5c82a81.css WARNING Not Found: /static/hyperkitty/libs/font-awesome/css/font-awesome.min.css [12/Mar/2017 18:59:43] "GET /static/hyperkitty/libs/jquery/smoothness/jquery-ui-1.10.3.custom.min.css HTTP/1.1" 404 146 WARNING Not Found: /static/hyperkitty/libs/icomoon/icomoon.css WARNING Not Found: /static/CACHE/css/cbbaa5c82a81.css WARNING Not Found: /static/hyperkitty/libs/jquery/jquery-ui-1.10.3.custom.min.js WARNING Not Found: /static/CACHE/js/e6cc5c334937.js WARNING Not Found: /static/hyperkitty/libs/icomoon/icomoon.css WARNING Not Found: /static/hyperkitty/libs/jquery/jquery-ui-1.10.3.custom.min.js [12/Mar/2017 18:59:43] "GET /static/hyperkitty/libs/font-awesome/css/font-awesome.min.css HTTP/1.1" 404 134 WARNING Not Found: /static/CACHE/js/e6cc5c334937.js [12/Mar/2017 18:59:43] "GET /static/CACHE/css/cbbaa5c82a81.css HTTP/1.1" 404 107 [12/Mar/2017 18:59:43] "GET /static/hyperkitty/libs/jquery/jquery-ui-1.10.3.custom.min.js HTTP/1.1" 404 134 [12/Mar/2017 18:59:43] "GET /static/hyperkitty/libs/icomoon/icomoon.css HTTP/1.1" 404 116 [12/Mar/2017 18:59:43] "GET /static/CACHE/js/e6cc5c334937.js HTTP/1.1" 404 105 WARNING Not Found: /static/hyperkitty/img/logo.png WARNING Not Found: /static/hyperkitty/img/logo.png [12/Mar/2017 18:59:43] "GET /static/hyperkitty/img/logo.png HTTP/1.1" 404 104 WARNING Not Found: /static/hyperkitty/libs/jquery/jquery-ui-1.10.3.custom.min.js WARNING Not Found: /static/hyperkitty/libs/jquery/jquery-ui-1.10.3.custom.min.js [12/Mar/2017 18:59:43] "GET /static/hyperkitty/libs/jquery/jquery-ui-1.10.3.custom.min.js HTTP/1.1" 404 134 WARNING Not Found: /static/CACHE/js/e6cc5c334937.js WARNING Not Found: /static/CACHE/js/e6cc5c334937.js [12/Mar/2017 18:59:43] "GET /static/CACHE/js/e6cc5c334937.js HTTP/1.1" 404 105 DEBUG = True [12/Mar/2017 19:01:49] "GET /archives/ HTTP/1.1" 200 8762 [12/Mar/2017 19:01:49] "GET /static/hyperkitty/libs/bootstrap/javascripts/bootstrap.min.js HTTP/1.1" 304 0 [12/Mar/2017 19:01:49] "GET /static/hyperkitty/libs/jquery.expander.js HTTP/1.1" 304 0 [12/Mar/2017 19:01:49] "GET /static/hyperkitty/libs/d3.v2.min.js HTTP/1.1" 304 0 [12/Mar/2017 19:01:49] "GET /static/hyperkitty/libs/jquery.hotkeys.js HTTP/1.1" 304 0 [12/Mar/2017 19:01:49] "GET /static/hyperkitty/js/hyperkitty-common.js HTTP/1.1" 304 0 [12/Mar/2017 19:01:49] "GET /static/hyperkitty/js/hyperkitty-index.js HTTP/1.1" 304 0 [12/Mar/2017 19:01:49] "GET /static/hyperkitty/js/hyperkitty-overview.js HTTP/1.1" 304 0 [12/Mar/2017 19:01:49] "GET /static/hyperkitty/js/hyperkitty-thread.js HTTP/1.1" 304 0 [12/Mar/2017 19:01:49] "GET /static/hyperkitty/js/hyperkitty-userprofile.js HTTP/1.1" 304 0 [12/Mar/2017 19:01:49] "GET /static/hyperkitty/libs/icomoon/icomoon.css HTTP/1.1" 200 699 [12/Mar/2017 19:01:49] "GET /static/hyperkitty/libs/jquery/smoothness/jquery-ui-1.10.3.custom.min.css HTTP/1.1" 200 18334 [12/Mar/2017 19:01:49] "GET /static/hyperkitty/libs/jquery/jquery-ui-1.10.3.custom.min.js HTTP/1.1" 200 58173 [12/Mar/2017 19:01:49] "GET /static/CACHE/css/hyperkitty.fe05f9db56f4.css HTTP/1.1" 200 196499 [12/Mar/2017 19:01:49] "GET /static/hyperkitty/libs/font-awesome/css/font-awesome.min.css HTTP/1.1" 200 17780 [12/Mar/2017 19:01:49] "GET /static/hyperkitty/img/logo.png HTTP/1.1" 200 21168 /mailman3/ DEBUG = False Server Error (500) DEBUG = True HTTP Error 500: A server error occurred. Please contact the administrator. Exception Location: /var/lib/mailman3/mailman-bundler/eggs/mailmanclient-1.0.1-py2.7.egg/mailmanclient/_client.py in call, line 109 Then VERY, verylong list... By means of PhpMyAdmin I created manually mailman3 database and few tables (looking at 0001_initial.py) , but it is not working O.K. This handmade table is not doing it's job. How I can export skeleton of Mm3 database to MySQLServer, please? How to solve Server Error (500)? Where to look first? Best regards. -- Tom - SP2L ------------------------------------ It is nice to be important. But it is more important to be nice!

2 1