- Mailman-users - lists.mailman3.org

Find a smtp server to send out emails
by Leon 07 Dec '16

07 Dec '16

Hi, This problem is not caused by mailman, but I still want to give it a shot here. I'm hosting a mailing list on top of mailman3. Emails are supposed to be sent out by AWS ses. However, ses requires that sender address must be verified, which leads to a problem that emails sent by subscribers to mailing list cannot be sent to other subcirbers, since their addresses are not verified. And it is impossible to verified every subscriber. Are there smtp service providers allowing unverified email address to send out emails, or do I have other solutions? Thanks. -- Best wishes, Leon

1 0

Docker files for mailman
by Simon Hanna 19 Nov '16

19 Nov '16

Hi, I started working on docker files for Mailman. I created three repositories: - https://github.com/simonsmiley/postorius-docker Holds the files needed to create a postorius container - https://github.com/simonsmiley/mailman-docker Holds the files needed to create a core container - https://github.com/simonsmiley/mailman-compose Holds docker-compose files that greatly simply the process of running the containers * The mailman repo currently lacks documentation * Currently no emails can be sent. I still have to figure out what the best way is... * Hyperkitty will be added next (together with a complete "bundler" install) I pushed two images to the docker hub. Their names are thelinuxguy/postorius and thelinuxguy/mailman I created two organizations mailman on docker hub and gnu-mailman on github https://github.com/gnu-mailman https://hub.docker.com/u/mailman/ I know we shouldn't use github, but there is no way around github/bitbucket for automated builds on docker hub. I post here to inform you about the docker images and I also to ask if I'm allowed to keep these two organizations and move my images/repos there. I'll happily give push/owner access to additional people if requested. The repositories could be mirrored to the gitlab mailman group, sadly the process doesn't work the other way round just yet. In case this request gets denied, I'll just remove the organizations and let the images be "unofficial". cheers, Simon

3 3

Mailman 3 Social Auth Configuration
by emonical＠misfitlabs.org 13 Oct '16

13 Oct '16

Hello. I am a new Mailman 3 user and have just gotten an environment configured using the Mailman bundler. The setup is almost complete, but, there's still Persona authorization. I was reading the your setup here from (https://wiki.list.org/DOC/Mailman%203%20installation%20experience) and was wondering if someone might have some insight as to how to remove the Persona log in to keep it locked down entirely to localized user registration.

2 1

Email commands
by Jean-Luc Wasmer 22 Sep '16

22 Sep '16

Hi, I wasn't able to find documentation about the currently support email commands for Mailman 3. The following command doesn't work for me (mailman bundler 3.0.0): subscribe address=$<$ADDRESS$>$ Will this be supported later on? Cheers, Jean-Luc

2 1

lists.mailman3.org web site.
by Mark Sapiro 30 Aug '16

30 Aug '16

I have just upgraded the lists.mailman3.org Mailman 3 installation to the heads of the GitLab mailman* branches. A major change is the switch from Persona to Django Allauth. This requires some configuration which isn't yet complete. Hopefully it will all be working very soon. In the mean time if you want to log in to Hyperkitty/Postorius you should be able to log in with your email address. The first time you do this, Mailman probably won't even know your password so you'll have to request a reset. Once you have reset your password, you should be able to log in. I hope to have several social auth choices working very soon. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 4

Mailman 3 Installation Packaging
by ddw David Wilson 30 Aug '16

30 Aug '16

Salutations; I understand that work is in progress to provide a convenient installation tool to facilitate getting the suite of requisite programs installed and working harmoniously with a minimum of hassle? I assume that involves some combination of containers and/or virtual environments to insulate and isolate issues and facilitate portability. In addition, it would entail Mailman 3, Hyperkitty, Posterius and also Django, etc. The database selection of PostgreSQL or other. Other optionals to be configured would be the email utilities such as Postfix, etc Personally, my server of choice would run Centos. I gather Mark Sapiro was working on this as well? *Is there sufficient progress to warrant believing that such a capability might exist in the 2016 August - September time frame as was suggested some time back? Or are there any revised time-frames? Or an approximate estimated road-map?* Best regards. Dave Wilson

2 1

Mailman3 in AWS
by Andrew Hodgson 23 Aug '16

23 Aug '16

Hi Guys, Just looking at options for running Mailman3 in AWS. Here are some thoughts: - DB backend can be done in AWS RDS using Amazon Aurora DB with MySQL driver, or PostgreSQL. - What files (if any) get stored on the web servers and updated dynamically? Has load balancing been done for the websites before? - Any issues with runner processes being ran on more than one machine talking to the same DB backend? Just some initial thoughts to stem discussion. Andrew.

3 2

Broken paths
by Jean-Luc Wasmer 22 Aug '16

22 Aug '16

Hi, Is there a way to change where mailman looks for files? I've run into many issues with the default config: - mailman is specifically calling Python 3.4, ignoring the fact that I have Python 3.5 - shell scripts expect bash to be at /bin/bash (mine is at /usr/local/bin/bash) - mailman expects postmap to be at /usr/sbin/postmap (mine is at /usr/local/sbin/postmap) Please CC me in your reply as I wasn't able to join this mailing list (I login by email, get the login.persona.org pop-up, click sign in, the pop-up closes... but I'm still not logged in). Cheers, Jean-Luc

5 10

Issue with Held Messages
by Jean-Luc Wasmer 20 Aug '16

20 Aug '16

Hi, No matter what action I set for member posts (Hold for moderator, Reject) they are always delivered. When I tried from a non-member email address, the message got held but when I try to see it I get a Server Error (500) page. The log files shows: ERROR 2016-08-18 01:04:30,231 base 21026 34722993152 Internal Server Error: /mailman3/lists/test.mydomain.com/held_messages Traceback (most recent call last): File "/usr/local/mailman/mailman-bundler/eggs/Django-1.8.14-py2.7.egg/django/core/handlers/base.py", line 132, in get_response response = wrapped_callback(request, *callback_args, **callback_kwargs) File "/usr/local/mailman/mailman-bundler/eggs/Django-1.8.14-py2.7.egg/django/views/generic/base.py", line 71, in view return self.dispatch(request, *args, **kwargs) File "/usr/local/mailman/mailman-bundler/eggs/postorius-1.0.3-py2.7.egg/postorius/views/generic.py", line 67, in dispatch return super(MailingListView, self).dispatch(request, *args, **kwargs) File "/usr/local/mailman/mailman-bundler/eggs/Django-1.8.14-py2.7.egg/django/views/generic/base.py", line 89, in dispatch return handler(request, *args, **kwargs) File "/usr/local/mailman/mailman-bundler/eggs/Django-1.8.14-py2.7.egg/django/utils/decorators.py", line 34, in _wrapper return bound_func(*args, **kwargs) File "/usr/local/mailman/mailman-bundler/eggs/postorius-1.0.3-py2.7.egg/postorius/auth/decorators.py", line 81, in wrapper return fn(*args, **kwargs) File "/usr/local/mailman/mailman-bundler/eggs/Django-1.8.14-py2.7.egg/django/utils/decorators.py", line 30, in bound_func return func.__get__(self, type(self))(*args2, **kwargs2) File "/usr/local/mailman/mailman-bundler/eggs/postorius-1.0.3-py2.7.egg/postorius/views/list.py", line 387, in get held_messages = utils.paginate(request, self.mailing_list.held, 20) File "/usr/local/mailman/mailman-bundler/eggs/mailmanclient-1.0.1-py2.7.egg/mailmanclient/_client.py", line 443, in held moderation_reasons=entry['moderation_reasons'], KeyError: u'moderation_reasons' Cheers, Jean-Luc

2 5

Does this get archive headers?
by Mark Sapiro 02 Aug '16

02 Aug '16

Sorry for the noise. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

1 0