- Mailman-users - lists.mailman3.org

Cloned mailman3 from the gitlab site, having issues locating the mailman3 file to start it
by Keith Christian May 20, 2024

May 20, 2024

The path to the mailman3.py file is: /home/mailman3/mailman/src/mailman/bin/mailman.py I created a mailman3 user, then, set the ownership on all directories and files in /home/mailman3 and below to mailman3:mailman3. When trying to run the "mailman info" command to verify that that mailman3 can start, I get this error: File "/home/mailman3/mailman/src/mailman/bin/mailman.py", line 22 in <module> from mailman.command.cli_help import help as help command Not sure what is going on here, help greatly appreciated.

3 4

When QQ email sends emails to the Mailman service set up by oneself, members of the list who use QQ email cannot receive the emails, and it shows that the emails are rejected.
by rqchen＠cnic.cn May 11, 2024

May 11, 2024

When QQ email sends emails to the Mailman service set up by oneself, members of the list who use QQ email cannot receive the emails, and it shows that the emails are rejected.

2 3

cnic-20240510
by 陈汝祈 May 10, 2024

May 10, 2024

cnic-20240510

1 0

Change Dmark settings via command line
by bob B May 8, 2024

May 8, 2024

I need to set all the DMARC settings on are lists to "replace from with list address". Is there an easy want to do this via cli? I could do it by viewing the web interface but we have a lot of lists.

4 9

Deleting A List
by Odhiambo Washington May 4, 2024

May 4, 2024

I have deleted a list (list(a)nog.ke) - list_id = list.nog.ke. I can see from Django Admin UI that the archives are still intact. I created a new list (list(a)lists.nog.ke) - list_id = list.lists.nog.ke Is there a way to move the archives from the old list to the new list? -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254 7 3200 0004/+254 7 2274 3223 In an Internet failure case, the #1 suspect is a constant: DNS. "Oh, the cruft.", egrep -v '^$|^.*#' ¯\_(ツ)_/¯ :-) [How to ask smart questions: http://www.catb.org/~esr/faqs/smart-questions.html]

2 6

Welcome message template errors
by Mark May 1, 2024

May 1, 2024

Hi All I'm getting errors when a custom "Welcome message" template is in place [list:user:notice:welcome]. Case: Subscribing a new user via the admin "Mass subscribe". Although the new user is successfully subscribed, a welcome message is not sent and the following error message displays on the webpage. === HTTP Error 400: HTTPConnectionPool(host='localhost', port=8000): Read timed out. (read timeout=5) === And the site-owner receives an email with ... ==== Internal Server Error: /mailman3/lists/ DoesNotExist at /mailman3/lists/ Site matching query does not exist. Request Method: GET Request URL: http://<REDACTED-PUBLIC-IPv4-ADDRESS>/mailman3/lists/ Django Version: 4.2.11 Python Executable: /opt/mailman/venv/bin/python3 Python Version: 3.11.2 ... etc ... === Regarding the second line in the email - my thinking is that it should be looking in "/opt/mailman/mm/var/lists" and not "/mailman3/lists/". If that's right, where would I look to change that directive? If not, any other clues would be greatly appreciated. The error doesn't occur if the is no custom "Welcome message" template - ie. the user is sent the default welcome message. $ mailman info GNU Mailman 3.3.9 (Tom Sawyer) Python 3.11.2 (main, Mar 13 2023, 12:18:29) [GCC 12.2.0] config file: /etc/mailman3/mailman.cfg REST root url: http://localhost:8001/3.1/

2 29

Re: [MM3-users off list] Re: Welcome message template errors
by Mark April 29, 2024

April 29, 2024

>> So, I'm thinking (in broad brush strokes) that if I'm stuck with this >> "http glitch" I could write a script to: >> >> 1. extract the text of the custom message from the database, >> 2. write that message text to a file >> 3. update the templates.uri entries to replace the >> http://localhost... with file:///path/to/file >> 4. cron the script to run every few minutes. >> >> It screams of utter clunk I know... > but it would work. > > Note that this may not be as big an issue as it seems. It doesn't > affect all templates, for example list:member:digest:footer, > list:member:digest:header, list:member:digest:masthead, > list:member:regular:footer, list:member:regular:header and > list:member:generic:footer are only used by the `out` runner when > sending messages, so these aren't affected. Right. Affected are all the "list:user:notice:***" (eg. goodbye, hold, reject,...) > > I'm still trying to determine what the issue is. To this end can you > tell me what Python version your Mailman uses and what is the output > from `pip freeze` with your venv active? $ mailman info GNU Mailman 3.3.9 (Tom Sawyer) Python 3.11.2 (main, Mar 13 2023, 12:18:29) [GCC 12.2.0] $ pip freeze aiosmtpd==1.4.4.post2 alembic==1.13.1 arrow==1.3.0 asgiref==3.7.2 atpublic==4.0 attrs==23.2.0 authheaders==0.16.2 authres==1.2.0 blessed==1.20.0 certifi==2023.11.17 cffi==1.16.0 charset-normalizer==3.3.2 click==8.1.7 cmarkgfm==2024.1.14 cryptography==42.0.1 defusedxml==0.7.1 Django==4.2.11 django-allauth==0.60.1 django-appconf==1.0.6 django-compressor==4.4 django-extensions==3.2.3 django-gravatar2==1.4.4 django-haystack==3.2.1 django-mailman3==1.3.12 django-picklefield==3.1 django-q==1.3.9 djangorestframework==3.14.0 dkimpy==1.1.5 dnspython==2.5.0 docutils==0.20.1 falcon==3.1.3 filelock==3.13.1 flufl.bounce==4.0 flufl.i18n==5.0.2 flufl.lock==8.0.2 greenlet==3.0.3 gunicorn==21.2.0 HyperKitty==1.3.9 idna==3.6 lazr.config==3.0 lazr.delegates==2.1.0 mailman==3.3.9 mailman-hyperkitty==1.2.1 mailman-web==0.0.9 mailmanclient==3.3.5 Mako==1.3.0 MarkupSafe==2.1.4 mistune==3.0.2 networkx==3.2.1 nh3==0.2.15 oauthlib==3.2.2 packaging==23.2 passlib==1.7.4 postorius==1.3.10 psutil==5.9.8 psycopg2-binary==2.9.9 publicsuffix2==2.20191221 pycparser==2.21 Pygments==2.17.2 PyJWT==2.8.0 python-dateutil==2.8.2 python3-openid==3.2.0 pytz==2023.3.post1 rcssmin==1.1.1 readme-renderer==42.0 redis==3.5.3 requests==2.31.0 requests-oauthlib==1.3.1 rjsmin==1.2.1 robot-detection==0.4 six==1.16.0 SQLAlchemy==2.0.25 sqlparse==0.4.4 types-python-dateutil==2.8.19.20240106 typing_extensions==4.9.0 urllib3==2.1.0 wcwidth==0.2.13 Whoosh==2.7.4 xapian @ file:///opt/mailman/xapian-1.4.24-cp311-cp311-linux_aarch64.whl xapian-haystack==3.1.0 zope.component==6.0 zope.configuration==5.0 zope.event==5.0 zope.hookable==6.0 zope.i18nmessageid==6.1.0 zope.interface==6.1 zope.schema==7.0.1

1 0

Mailman with Python 3.12
by Andrew Hodgson April 26, 2024

April 26, 2024

Hi. What's the latest on Mailman with Python 3.12? Looking at Ubuntu 24.04 upgrade plans and realised it comes with Python 3.12. Ubuntu are shipping Mailman packages from Debian so not sure if they have made any changes to make Python 3.12 work. I don't use those packages myself. Andrew.

3 3

mailman3-web and the django middleware problem
by Thomas Stein April 26, 2024

April 26, 2024

Howdy! I'm trying to migrate an aged mailman3 installation from ubuntu 20.04 to ubuntu 22.04. Fresh install of mailman3-web gives me: Creating config file /etc/dbconfig-common/mailman3-web.conf with new version creating database mailman3web.db: success. verifying database mailman3web.db exists: success. Creating config file /etc/mailman3/mailman-web.py with new version /usr/lib/python3/dist-packages/django_q/conf.py:174: UserWarning: Retry and timeout are misconfigured. Set retry larger than t imeout,failure to do so will cause the tasks to be retriggered before completion.See https://django-q2.readthedocs.io/en/maste r/configure.html#retry for details. warn( Traceback (most recent call last): File "/usr/bin/django-admin", line 33, in <module> sys.exit(load_entry_point('Django==4.2.11', 'console_scripts', 'django-admin')()) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/django/core/management/__init__.py", line 442, in execute_from_command_line utility.execute() File "/usr/lib/python3/dist-packages/django/core/management/__init__.py", line 416, in execute django.setup() File "/usr/lib/python3/dist-packages/django/__init__.py", line 24, in setup apps.populate(settings.INSTALLED_APPS) File "/usr/lib/python3/dist-packages/django/apps/registry.py", line 124, in populate app_config.ready() File "/usr/lib/python3/dist-packages/allauth/account/apps.py", line 15, in ready raise ImproperlyConfigured( django.core.exceptions.ImproperlyConfigured: allauth.account.middleware.AccountMiddleware must be added to settings.MIDDLEWARE dpkg: error processing package mailman3-web (--configure): installed mailman3-web package post-installation script subprocess returned error exit status 1 Errors were encountered while processing: mailman3-web needrestart is being skipped since dpkg has failed E: Sub-process /usr/bin/dpkg returned an error code (1) I've already seen this thread: https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message… ...but that does not get me anywhere. Could someone please push me in the right direction? cheers! t.

4 12

Slow performance when listing members on Postorius
by Alan So April 24, 2024

April 24, 2024

We are about to upgrade to Mailman core 3.3.9 and Postorius 1.3.10. We notice that for setup with large number of members, the performance is much slower when listing members on web (Postorius). Further troubleshooting show that there are quite a number of API calls which do not appear in Mailman core 3.3.5 and Postorius 1.3.6 when we list members. [17/Apr/2024:14:12:22 +0800] "GET /3.1/members/33a6266d0a04472c8d5d6c78869a964c/preferences HTTP/1.1" 200 156 "-" "GNU Mailman REST client v3.3.5" [17/Apr/2024:14:12:22 +0800] "GET /3.1/members/7a18b7cb90a34ac98881a3f01b5488d1/preferences HTTP/1.1" 200 156 "-" "GNU Mailman REST client v3.3.5" [17/Apr/2024:14:12:22 +0800] "GET /3.1/members/61c6c3e2aaf443babd3bd191519b0424/preferences HTTP/1.1" 200 156 "-" "GNU Mailman REST client v3.3.5" [17/Apr/2024:14:12:22 +0800] "GET /3.1/members/8dd681165b8c436fac6793cae1ed2c27/preferences HTTP/1.1" 200 156 "-" "GNU Mailman REST client v3.3.5" Further tests showing that each database query using "_member_id" in table member can take as much as 0.3 to 0.5 seconds for some large installations. The default 25 members per page mean that it will take at least 7.5 to 12.5 seconds. Changing to 200 members per page will take even longer time. We wonder whether "_member_id" should be indexed just like most other id in the database mailman_core in order to solve the issue. Or are there any other workarounds? +----------------------+--------------+------+-----+---------+----------------+ | Field | Type | Null | Key | Default | Extra | +----------------------+--------------+------+-----+---------+----------------+ | id | int(11) | NO | PRI | NULL | auto_increment | | _member_id | char(32) | YES | | NULL | | | role | int(11) | YES | MUL | NULL | | | list_id | varchar(255) | YES | MUL | NULL | | | moderation_action | int(11) | YES | | NULL | | | address_id | int(11) | YES | MUL | NULL | | | preferences_id | int(11) | YES | MUL | NULL | | | user_id | int(11) | YES | MUL | NULL | | | bounce_score | int(11) | YES | | NULL | | | last_bounce_received | datetime | YES | | NULL | | | last_warning_sent | datetime | YES | | NULL | | | total_warnings_sent | int(11) | YES | | NULL | | +----------------------+--------------+------+-----+---------+----------------+

1 1