- Mailman-users - lists.mailman3.org

Setup Question: Disk-Layout (Migrating from Mailman 2.1)
by christian.schneider＠tu-dortmund.de April 19, 2025

April 19, 2025

Hello, actually I am running the latest available Mailman-2 Version on Ubuntu 20.04! Now it is really time to move on! :-) I want to set up a new server (Ubuntu-24.04) and install Mailman-3 with the Virtualenv setup method: https://docs.mailman3.org/en/latest/install/virtualenv.html As I know from my old Mailman-2.1 the archives could get quite big... ;-) So it seems very important to provide enough (expandable) disk space at the right place. (I plan to use a seperate partition with LVM for the path in question) But I could find no information about the location where hyperkitty stores the archives on an Ubuntu-/Linux-system. I assume the archives are stored underneath "/var/..." this is only a guess. But is this guess right? Another question is: How much space do I have to plan (roughly) for the "/opt"-partition for the mailman install if the archives are stored under "/var/..."? Any guidance ist very much appreciated! Thank you very much Chris

6 14

moving from sqlite3 to postgresql
by Michael Richardson April 19, 2025

April 19, 2025

Hi, I installed mailman3 a few years ago on lists.sandelman.ca aka lists.tcpdump.org. My upgrade was in part a response to the HTTP based attacks that used the signup form on mailman2 to attack people via SMTP with DOS. I know the IETF mailman2 install {now gone} had some kind of delay implemented in the web form before you could submit. I didn't understand why. I installed via debian packages, and I'd really prefer to stay with that. (Not what many maintainers would say, I know. Essential that it work if mailman3 is going to take over) There were problems, probably with the hyperkitty integration with subsequent updates seemed to solve. I installed with sqlite3, since it seemed if all work was going to go through the mailman3 daemon, that it would handle all the concurrency issues. This has not been the case. I get weekly complaints about the database being locked. Sometimes this goes way on it's own, but sometimes it does not. A good way to tickle this is to go the web interface, go to a list with 200 held messages, and then having told it to show me 100+ messages per page, to then tell it to discard them all. So slow. Before I realized what was going on, I'd open multiple tabs to try to make this concurrent. So I tried to switch last week from sqlite3 to postgresql. I used pgloader with a configuration file attached below. This seemed easier than a sqlite3 dump/psql, as the SQL requires some massaging that seeemed to require more brainpower than I had at the time. I then edited /etc/mailman3/mailman.cfg to suit. I had set up the postgresql database under the "list" owner, so unix-domain socket permissions, and restarted. I then saw some errors: lists not found! I visited the web interface. NO LISTS. DAMN. I put it back. I haven't figured out what went wrong yet. I will clone the VM and try again. I will report whatever I find here. === load database from '/var/lib/mailman3/mailman.db' into postgresql:///mailman3 with include drop, create tables, create indexes, reset sequences set work_mem to '16MB', maintenance_work_mem to '512 MB'; === ps: I'd pay some $$ money for email support consulting.

3 3

Disabling "delete account" option
by Hitashi mancho April 19, 2025

April 19, 2025

Dear all, Recently, I have migrated from Mailman2 to Mailman3 GNU Mailman 3.3.10 (Tom Sawyer) Python 3.11.9 Some of the list users logged into Postorius and went to profile settings. Over there, they found an option "Delete Account". Without any discussion, they deleted their account and all their list membership. How can we prevent this from happening? Is it possible to disable this "Delete Account" option, or can we add some admin approval? Regards, Hitachi. ___________________________________________ Mailman's content filtering has removed the following MIME parts from this message. Content-Type: image/png Name: firefox_lMnN5UcNTB.png Replaced multipart/alternative part with first alternative.

2 1

Do you struggle with message rejected. AUP#CDRBL while using mailman with your ISP email relay?
by Michael Richardson April 18, 2025

April 18, 2025

I'm impressed by Philip Bondi's use of mailman[23] for home financial automation. ("Take off Eh!") ... It seems like a ticketing system would be a better system for such a use... maybe the IETF SML WG will further help with this.. (I find most Canadian financial institutions are so far behind the curve) I think that your email is hosted by hostedemail.com? I'm guessing that "eshop" is the mailbox you use for these common notices, and maybe you retrieve that into your mailman3 with fetchmail or something? Or does your ISP turn around and SMTP to you directly? Is it your MTA, their MTA, or mailman that is doing the rejection? My problem, on lists.sandelman.ca aka lists.tcpdump.org, is messages that appear to have been processed by my MTA (according to postfix logs), but which are never delivered, nor held. Lost somewhere in mailman3 queue. Sometimes they show up after a host reboot.

3 2

Do you struggle with message rejected. AUP#CDRBL while using mailman with your ISP email relay?
by Philip Bondi April 17, 2025

April 17, 2025

Hello to all: mailman3 is phenomenal upgrade from mailman2. Very nice. Thank you to the team. In our family, we use mailman to provide redundancy on important financial emails. In this manner, emails from banks, government, ecommerce or other important providers are distributed to multiple family members. And we can ask family members if they paid the credit card bill, received their delivery, saw their tax liability or refund notification, etc. Does anyone else use mailman for such a purpose? Do you struggle with "message rejected. AUP#CDRBL" while using mailman with your ISP email relay? For example, when receiving email from a Bank or the Government of Canada on a mailman2 list, sometimes my ISP would not relay the email and I would get message rejected. AUP#CDRBL On mailman2, I mitigated by stripping headers, wrapping message and DKIM signing. Here is a mailman2 message that is stripped, wrapped and signed. https://freeimage.host/i/30O5EXe Do you have this problem with your ISP with certain senders? What are your mitigation strategies on mailman3?

3 3

makemigrations --merge error after Debian upgrade
by Chupin Maxime April 16, 2025

April 16, 2025

Hi, I upgraded my debian version, and since, it seems that I have a problem. I tried `mailman-web migrate` (and `mailman-web collectstatic` etc.) and I get the error message: ``` CommandError: Conflicting migrations detected; multiple leaf nodes in the migration graph: (0010_auto_20220618_2315, 0014_schedule_cluster in django_q; 0014_auto_20220618_2315, 0018_alter_emailtemplate_language in postorius). To fix them run 'python manage.py makemigrations --merge' ``` So I tried `mailman-web makemigrations --merge` that ended with ``` PermissionError: [Errno 13] Permission denied: '/usr/lib/python3/dist-packages/postorius/migrations/0019_merge_20240930_1159.py' ``` There is no such a file in the migration directory. Any idea ? Thanks in advance, All the best Maxime Chupin

7 28

how should I implement multiple domains for receiving emails to a list
by Philip Bondi April 16, 2025

April 16, 2025

Hello to all: I think I have resolved almost all of my issues. Thank you for your coaching. You are all super heroes. I have two domains: systemdatabase.ca, systemdatabase.homelinux.com All my lists should be on both domains. So h(a)systemdatabase.ca is the same list as h(a)systemdatabase.homelinux.com. I found this was the mailman2 behaviour on my old CentOS 7 installation and I am accustomed to it. I edited /opt/mailman/venv_mm/var/data/postfix_lmtp directly. Duplicated and edited all the lines. And compiled with postmap /opt/mailman/venv_mm/var/data/postfix_lmtp I sent a test email. This appears to work. Is this the best method to achieve this goal? What would you recommend?

2 2

Unable to ban users via mailman-shell
by Mihai Moldovan April 13, 2025

April 13, 2025

Hi I can't seem to be able to add bans via mailman-shell: # mailman-wrapper shell Welcome to the GNU Mailman shell >>> from mailman.testing.documentation import dump_json >>> from mailman.interfaces.mailinglist import IMailingList >>> from zope.component import getUtility >>> list_manager = getUtility(IListManager) >>> mlist = list_manager.get('x2go-commits(a)lists.x2go.org') >>> bans = IBanManager(mlist) >>> new_bans = ["really", "long", "list", "with", "addresses", "I'd", "like", "to", "ban"] >>> for new_ban in new_bans: ... bans.ban(new_ban) ... >>> for ban in bans: ... print('{0}: {1}'.format(ban.list_id,ban.email)) ... [long list of bans] >>> exit() # mailman-wrapper shell Welcome to the GNU Mailman shell >>> from mailman.testing.documentation import dump_json >>> from mailman.interfaces.mailinglist import IMailingList >>> from zope.component import getUtility >>> list_manager = getUtility(IListManager) >>> mlist = list_manager.get('x2go-commits(a)lists.x2go.org') >>> bans = IBanManager(mlist) >>> for ban in bans: ... print('{0}: {1}'.format(ban.list_id,ban.email)) ... >>> exit() GNU Mailman 3.3.8 (Tom Sawyer), installed on Ubuntu 24.04 via distro packages (yes, they are completely broken; yes, I had to backport fixes from your Gitlab instance to even get this properly installed and working; yes, I think I can handle this) What could possibly be the cause of this? I don't even see any calls to the REST API for each bans.ban() call. Should I see those? Or is bans.ban() directly modifying the database? I skimmed the source code and it looks like as if IBanManager and the concrete BanManager model seem to work directly on a DB connection, so I assume that it's not going through REST. If that is the case (I'm using sqlite3, nothing fancy), why doesn't it stick? Do I have to commit changes somehow? Mihai

3 5

CSS Hyperkitty ERROR
by Johan Alsina April 12, 2025

April 12, 2025

Hi, i installed mailman3 with virtualenv, all is working fine, the admin site works fine, the mailman(postorious) site works fine, but when im in hyperkitty the site shows without the css style.. in my web browser dev tool it shows like they loaded ok.. Here you can see what i see when loading hyperkitty https://freeimage.host/i/3n6kXKQ and mailman(postorius) https://freeimage.host/i/mailman.3n6kVix When i run my server with verbosity it shows like all is loading ok: https://freeimage.host/i/3n6SViG Any ideas? :/ My static files are loading from /static/CACHE/css/output.a0f71925131b.css and /static/hyperkitty/libs/fonts/font-awesome/css/font-awesome.min.css It seems like the real error are in the /static/CACHE files, because hyperkitty is the only one who load files from this directory.. postorius uses /static/postorius and all the css files are working fine. I checked permissions for the directory, cleared cache, etc.. i dont know what to do. This is my config for staticfiles: STATIC_URL = 'static/' STATIC_ROOT = os.path.join(BASE_DIR, 'staticfiles') STATICFILES_DIRS = [ os.path.join(BASE_DIR, 'static'), '/opt/mailman/projectes/mailman3web/static/CACHE', Thank you so much in advance.

5 9

Can't post to my own list from HyperKitty
by megabrutal＠gmail.com April 11, 2025

April 11, 2025

Hi Everyone, I've recently installed Mailman3 and still testing it. I tried to reply to a topic on my own list while also being a superuser from HyperKitty, but I got this error message: "This list is moderated, please subscribe to it before posting." Then why I even see the archive of the private list? What might be wrong? One thing that might confuse the system is that I added a secondary e-mail to my account. I thought it would allow me to post from any of my addresses, but it seems like it's not the case, looks like I can only subscribe with one of the addresses. It also looks like HyperKitty has trouble matching up the addresses, as it lists 4 participants for the conversation, while 2 of them is my account, the other 2 is my test address. In reality, it should list 2 posters. Best regards, MegaBrutal

4 19

Missing styling on select pages
by grodriguez＠usra.edu April 9, 2025

April 9, 2025

Hello all, I installed mailman3 on Rocky Linux 9 via the Virtualenv Installation installation guide. I configured Apache httpd to proxy gunicorn. For the most part, everything is looking good except for some select pages that do not contain the styling like all other pages. When a user sees the "Verify Your Email Address" screen, it's without any of the styling. /accounts/confirm-email/ Same for when a user tries to reset their password. The initial screen looks good (with styling), but after entering the email address and clicking "Reset My Password", the following screen is bare. /accounts/password/reset/done/ I have Mailman 3.3.10, Postorius Version 1.3.13, and HyperKitty version 1.3.12. Any suggestions?

2 2

Debian 12 postfix errors: "warning: connect to transport private/lmtp: Connection refused" and "status=deferred (mail transport unavailable)"
by Philip Bondi April 8, 2025

April 8, 2025

Hello to all: My apache2 issues are resolved. My xapian issues are not yet resolved, but this transport error is more important. I have de-configured lmtp within dovecot. I mistakenly confused the lmtp feature in mailman3 with a requirement for an lmtp implementation with dovecot. Gosh I'm following https://docs.mailman3.org/projects/mailman/en/latest/src/mailman/docs/mta.h… and https://docs.mailman3.org/en/latest/install/virtualenv.html Please observe mailman.cfg extract, postconf -n, /opt/mailman/mm/var/data/postfix_lmtp extract, telnet localhost 9024 and journal entries. [812] # awk -v RS="\n\n" '/\[mta/{print}' /etc/mailman3/mailman.cfg [mta] verp_confirmations: yes verp_personalized_deliveries: yes verp_delivery_interval: 1 [mta] incoming: mailman.mta.postfix.LMTP outgoing: mailman.mta.deliver.deliver lmtp_host: 127.0.0.1 lmtp_port: 9024 smtp_host: smtp.bellnet.ca smtp_port: 25 #configuration: python:mailman.config.postfix [799] # postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no compatibility_level = 3.6 inet_protocols = ipv4 local_recipient_maps = hash:/opt/mailman/mm/var/data/postfix_lmtp mailbox_size_limit = 0 masquerade_domains = systemdatabase.ca milter_default_action = accept milter_protocol = 2 mydestination = $myhostname, systemdatabase.ca, localhost.systemdatabase.ca, localhost, systemdatabase.homelinux.com mydomain = systemdatabase.ca myhostname = systemdatabase.ca mynetworks = 127.0.0.0/8 myorigin = systemdatabase.ca non_smtpd_milters = $smtpd_milters owner_request_special = no proxy_interfaces = 192.168.1.8 readme_directory = no recipient_delimiter = + relay_domains = hash:/opt/mailman/mm/var/data/postfix_domains relayhost = [smtp.bellnet.ca]:25 smtp_tls_loglevel = 1 smtp_tls_mandatory_protocols = !SSLv2, !SSLv3, !TLSv1, !TLSv1.1 smtp_tls_protocols = !SSLv2, !SSLv3, !TLSv1, !TLSv1.1 smtp_tls_security_level = may smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) smtpd_milters = inet:localhost:8891 smtpd_recipient_restrictions = permit_mynetworks permit_sasl_authenticated reject_unauth_destination permit_inet_interfaces smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination permit_inet_interfaces smtpd_tls_cert_file = /etc/letsencrypt/live/systemdatabase.ca-0001/fullchain.pem smtpd_tls_key_file = /etc/letsencrypt/live/systemdatabase.ca-0001/privkey.pem smtpd_tls_loglevel = 1 smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3, !TLSv1, !TLSv1.1 smtpd_tls_protocols = !SSLv2, !SSLv3, !TLSv1, !TLSv1.1 smtpd_tls_security_level = may smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtputf8_enable = no transport_maps = hash:/opt/mailman/mm/var/data/postfix_lmtp unknown_local_recipient_reject_code = 550 virtual_mailbox_maps = hash:/opt/mailman/mm/var/data/postfix_lmtp [813] # awk -v RS="\n\n" '/ebill/{print}' /opt/mailman/mm/var/data/postfix_lmtp ebill(a)systemdatabase.ca lmtp:[127.0.0.1]:9024 ebill-bounces(a)systemdatabase.ca lmtp:[127.0.0.1]:9024 ebill-confirm(a)systemdatabase.ca lmtp:[127.0.0.1]:9024 ebill-join(a)systemdatabase.ca lmtp:[127.0.0.1]:9024 ebill-leave(a)systemdatabase.ca lmtp:[127.0.0.1]:9024 ebill-owner(a)systemdatabase.ca lmtp:[127.0.0.1]:9024 ebill-request(a)systemdatabase.ca lmtp:[127.0.0.1]:9024 ebill-subscribe(a)systemdatabase.ca lmtp:[127.0.0.1]:9024 ebill-unsubscribe(a)systemdatabase.ca lmtp:[127.0.0.1]:9024 [797] # telnet localhost 9024 Trying ::1... Connection failed: Connection refused Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 shackleton12.systemdatabase.ca GNU Mailman LMTP runner 2.0 QUIT 221 Bye Connection closed by foreign host. [797] # lsof -i -P -n | grep -e "$:587\>\|:8024\>\|:8891\>\|:25\>\|:9024\>$" opendkim 3134524 opendkim 3u IPv4 17484764 0t0 TCP 127.0.0.1:8891 (LISTEN) master 3238178 root 13u IPv4 18076567 0t0 TCP *:25 (LISTEN) master 3238178 root 17u IPv4 18076570 0t0 TCP *:587 (LISTEN) python3 3240659 mailman 26u IPv4 18095451 0t0 TCP 127.0.0.1:9024 (LISTEN) [818] # journalctl -n 3000|grep postfi|grep "Apr 07 14:13" Apr 07 14:13:27 shackleton12 postfix/qmgr[3240968]: 88A222D6E: from=<pjbondi(a)systemdatabase.com>, size=2009, nrcpt=1 (queue active) Apr 07 14:13:27 shackleton12 postfix/qmgr[3240968]: warning: connect to transport private/lmtp: Connection refused Apr 07 14:13:27 shackleton12 postfix/error[3246571]: 88A222D6E: to=<ebill(a)systemdatabase.ca>, relay=none, delay=528, delays=528/0.03/0/0.04, dsn=4.3.0, status=deferred (mail transport unavailable) I've tried to enable debugging for postfix, but cannot get more details on warning: connect to transport private/lmtp: Connection refused nor (mail transport unavailable)

3 2

Debian 12: Following docs does not create /opt/mailman/web/xapian_index
by Philip Bondi April 7, 2025

April 7, 2025

Hello to all: Following along: https://docs.mailman3.org/en/latest/install/virtualenv.html#setting-up-full… But Method 1 does not create /opt/mailman/web/xapian_index for me on Debian 12 export XAPIAN_VERSION="1.4.27" curl https://raw.githubusercontent.com/notanumber/xapian-haystack/master/xapian_… -o xapian_wheel_builder.sh bash xapian_wheel_builder.sh $XAPIAN_VERSION (venv) mailman@shackleton12:~$ find /opt/mailman -type d -name '*xapian*' /opt/mailman/venv/lib/python3.11/site-packages/xapian /opt/mailman/venv/lib/python3.11/site-packages/xapian_haystack-3.1.0.dist-info /opt/mailman/venv/lib/python3.11/site-packages/xapian-1.4.27.dist-info (venv) mailman@shackleton12:~$ find /opt/mailman -type f -name '*xapian_index*' (venv) mailman@shackleton12:~$ When I try to search, I get this stack trace by email: Internal Server Error: /archives/search PermissionError at /archives/search [Errno 13] Permission denied: '/opt/mailman/web/xapian_index' Request Method: GET Request URL: http://systemdatabase.ca/archives/search?mlist=ebill%40systemdatabase.ca&q=… Django Version: 4.2.20 Python Executable: /opt/mailman/venv/bin/uwsgi Python Version: 3.11.2 Python Path: ['.', '', '/etc/mailman3', '/usr/lib/python311.zip', '/usr/lib/python3.11', '/usr/lib/python3.11/lib-dynload', '/opt/mailman/venv/lib/python3.11/site-packages'] Server time: Tue, 01 Apr 2025 16:54:49 +0000 Installed Applications: ['hyperkitty', 'postorius', 'django_mailman3', 'django.contrib.admin', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.staticfiles', 'django.contrib.humanize', 'rest_framework', 'django_gravatar', 'compressor', 'haystack', 'django_extensions', 'django_q', 'allauth', 'allauth.account', 'allauth.socialaccount'] Installed Middleware: ('allauth.account.middleware.AccountMiddleware', 'django.contrib.sessions.middleware.SessionMiddleware', 'django.middleware.common.CommonMiddleware', 'django.middleware.csrf.CsrfViewMiddleware', 'django.middleware.locale.LocaleMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', 'django.contrib.messages.middleware.MessageMiddleware', 'django.middleware.clickjacking.XFrameOptionsMiddleware', 'django.middleware.security.SecurityMiddleware', 'django_mailman3.middleware.TimezoneMiddleware', 'postorius.middleware.PostoriusMiddleware') Traceback (most recent call last): File "/opt/mailman/venv/lib/python3.11/site-packages/django/core/handlers/exception.py", line 55, in inner response = get_response(request) ^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.11/site-packages/django/core/handlers/base.py", line 197, in _get_response response = wrapped_callback(request, *callback_args, **callback_kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.11/site-packages/hyperkitty/views/search.py", line 54, in search results = EmptySearchQuerySet() ^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.11/site-packages/haystack/query.py", line 25, in __init__ self._determine_backend() ^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.11/site-packages/haystack/query.py", line 58, in _determine_backend self.query = connections[backend_alias].get_query() ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.11/site-packages/haystack/backends/__init__.py", line 1100, in get_query return self.query(using=self.using) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.11/site-packages/haystack/backends/__init__.py", line 510, in __init__ self.backend = connections[self._using].get_backend() ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.11/site-packages/haystack/backends/__init__.py", line 1092, in get_backend self._backend = self.backend(self.using, **self.options) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.11/site-packages/xapian_backend.py", line 207, in __init__ os.makedirs(self.path) ^^^^^^^^^^^^^^^^^^^^^^ File "<frozen os>", line 225, in makedirs <source code not available> ^^^^^^^^^^^^^^^^^ Exception Type: PermissionError at /archives/search Exception Value: [Errno 13] Permission denied: '/opt/mailman/web/xapian_index' Raised during: hyperkitty.views.search.search Request information: USER: pjbondi GET: mlist = 'ebill(a)systemdatabase.ca' q = 'cost' POST: No POST data FILES: No FILES data COOKIES: csrftoken = '********************' sessionid = '********************' META: CSRF_COOKIE = '8C2Wu0RN7MyvvyBP89caOkgFalH79NYD' HTTP_ACCEPT = 'text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7' HTTP_ACCEPT_ENCODING = 'gzip, deflate, br, zstd' HTTP_ACCEPT_LANGUAGE = 'en-US,en;q=0.9' HTTP_CONNECTION = 'Keep-Alive' HTTP_COOKIE = '********************' HTTP_HOST = 'systemdatabase.ca' HTTP_REFERER = 'https://systemdatabase.ca/archives/list/ebill@systemdatabase.ca/latest' HTTP_SEC_CH_UA = '"Chromium";v="134", "Not:A-Brand";v="24", "Google Chrome";v="134"' HTTP_SEC_CH_UA_MOBILE = '?0' HTTP_SEC_CH_UA_PLATFORM = '"Windows"' HTTP_SEC_FETCH_DEST = 'document' HTTP_SEC_FETCH_MODE = 'navigate' HTTP_SEC_FETCH_SITE = 'same-origin' HTTP_SEC_FETCH_USER = '?1' HTTP_UPGRADE_INSECURE_REQUESTS = '1' HTTP_USER_AGENT = 'Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/134.0.0.0 Safari/537.36' HTTP_X_FORWARDED_FOR = '192.168.1.1' HTTP_X_FORWARDED_HOST = 'systemdatabase.ca' HTTP_X_FORWARDED_SERVER = 'systemdatabase.ca' PATH_INFO = '/archives/search' QUERY_STRING = 'mlist=ebill%40systemdatabase.ca&q=cost' REMOTE_ADDR = '127.0.0.1' REQUEST_METHOD = 'GET' REQUEST_URI = '/archives/search?mlist=ebill%40systemdatabase.ca&q=cost' SCRIPT_NAME = '' SERVER_NAME = 'shackleton12' SERVER_PORT = '8000' SERVER_PROTOCOL = 'HTTP/1.1' uwsgi.core = 0 uwsgi.node = b'shackleton12' uwsgi.version = b'2.0.28' wsgi.errors = <_io.TextIOWrapper name=2 mode='w' encoding='UTF-8'> wsgi.file_wrapper = <built-in function uwsgi_sendfile> wsgi.input = <uwsgi._Input object at 0x7fa484b846b0> wsgi.multiprocess = True wsgi.multithread = True wsgi.run_once = False wsgi.url_scheme = 'http' wsgi.version = '(1, 0)' Settings: Using settings module settings ABSOLUTE_URL_OVERRIDES = {} ACCOUNT_DEFAULT_HTTP_PROTOCOL = 'https' ACCOUNT_LOGIN_METHODS = {'username', 'email'} ACCOUNT_UNIQUE_EMAIL = True ADMINS = "(('Mailman Suite Admin', 'pjbondi(a)systemdatabase.com'),)" ALLOWED_HOSTS = ['localhost', '127.0.0.1', 'systemdatabase.ca', '192.168.1.8'] APPEND_SLASH = True AUTHENTICATION_BACKENDS = "('django.contrib.auth.backends.ModelBackend', 'allauth.account.auth_backends.AuthenticationBackend')" AUTH_PASSWORD_VALIDATORS = '********************' AUTH_USER_MODEL = 'auth.User' BASE_DIR = PosixPath('/opt/mailman/web') CACHES = {'default': {'BACKEND': 'django.core.cache.backends.locmem.LocMemCache'}} CACHE_MIDDLEWARE_ALIAS = 'default' CACHE_MIDDLEWARE_KEY_PREFIX = '********************' CACHE_MIDDLEWARE_SECONDS = 600 COMPRESSORS = {'css': 'compressor.css.CssCompressor', 'js': 'compressor.js.JsCompressor'} COMPRESS_CACHEABLE_PRECOMPILERS = '()' COMPRESS_CACHE_BACKEND = 'default' COMPRESS_CACHE_KEY_FUNCTION = '********************' COMPRESS_CLEAN_CSS_ARGUMENTS = '' COMPRESS_CLEAN_CSS_BINARY = 'cleancss' COMPRESS_CLOSURE_COMPILER_ARGUMENTS = '' COMPRESS_CLOSURE_COMPILER_BINARY = 'java -jar compiler.jar' COMPRESS_CSS_HASHING_METHOD = 'mtime' COMPRESS_DATA_URI_MAX_SIZE = 1024 COMPRESS_DEBUG_TOGGLE = None COMPRESS_ENABLED = True COMPRESS_FILTERS = {'css': ['compressor.filters.css_default.CssAbsoluteFilter', 'compressor.filters.cssmin.rCSSMinFilter'], 'js': ['compressor.filters.jsmin.rJSMinFilter']} COMPRESS_JINJA2_GET_ENVIRONMENT = <function CompressorConf.JINJA2_GET_ENVIRONMENT at 0x7fa480f33f60> COMPRESS_MINT_DELAY = 30 COMPRESS_MTIME_DELAY = 10 COMPRESS_OFFLINE = True COMPRESS_OFFLINE_CONTEXT = {'STATIC_URL': '/static/'} COMPRESS_OFFLINE_MANIFEST = 'manifest.json' COMPRESS_OFFLINE_MANIFEST_STORAGE = 'compressor.storage.OfflineManifestFileStorage' COMPRESS_OFFLINE_MANIFEST_STORAGE_ALIAS = 'compressor-offine' COMPRESS_OFFLINE_TIMEOUT = 31536000 COMPRESS_OUTPUT_DIR = 'CACHE' COMPRESS_PARSER = 'compressor.parser.AutoSelectParser' COMPRESS_PRECOMPILERS = "(('text/x-scss', 'sassc -t compressed {infile} {outfile}'), ('text/x-sass', 'sassc -t compressed {infile} {outfile}'))" COMPRESS_REBUILD_TIMEOUT = 2592000 COMPRESS_ROOT = '/opt/mailman/web/static' COMPRESS_STORAGE = 'compressor.storage.CompressorFileStorage' COMPRESS_STORAGE_ALIAS = 'compressor' COMPRESS_TEMPLATE_FILTER_CONTEXT = {'STATIC_URL': '/static/'} COMPRESS_URL = '/static/' COMPRESS_URL_PLACEHOLDER = '/__compressor_url_placeholder__/' COMPRESS_VERBOSE = False COMPRESS_YUGLIFY_BINARY = 'yuglify' COMPRESS_YUGLIFY_CSS_ARGUMENTS = '--terminal' COMPRESS_YUGLIFY_JS_ARGUMENTS = '--terminal' COMPRESS_YUI_BINARY = 'java -jar yuicompressor.jar' COMPRESS_YUI_CSS_ARGUMENTS = '' COMPRESS_YUI_JS_ARGUMENTS = '' CSRF_COOKIE_AGE = 31449600 CSRF_COOKIE_DOMAIN = None CSRF_COOKIE_HTTPONLY = False CSRF_COOKIE_MASKED = False CSRF_COOKIE_NAME = 'csrftoken' CSRF_COOKIE_PATH = '/' CSRF_COOKIE_SAMESITE = 'Lax' CSRF_COOKIE_SECURE = False CSRF_FAILURE_VIEW = 'django.views.csrf.csrf_failure' CSRF_HEADER_NAME = 'HTTP_X_CSRFTOKEN' CSRF_TRUSTED_ORIGINS = ['https://systemdatabase.ca'] CSRF_USE_SESSIONS = False DATABASES = {'default': {'ENGINE': 'django.db.backends.postgresql_psycopg2', 'NAME': 'mailmanweb', 'USER': 'mailman', 'PASSWORD': '********************', 'HOST': 'localhost', 'PORT': '5432', 'ATOMIC_REQUESTS': False, 'AUTOCOMMIT': True, 'CONN_MAX_AGE': 0, 'CONN_HEALTH_CHECKS': False, 'OPTIONS': {}, 'TIME_ZONE': None, 'TEST': {'CHARSET': None, 'COLLATION': None, 'MIGRATE': True, 'MIRROR': None, 'NAME': None}}} DATABASE_ROUTERS = [] DATA_UPLOAD_MAX_MEMORY_SIZE = 2621440 DATA_UPLOAD_MAX_NUMBER_FIELDS = 1000 DATA_UPLOAD_MAX_NUMBER_FILES = 100 DATETIME_FORMAT = 'N j, Y, P' DATETIME_INPUT_FORMATS = ['%Y-%m-%d %H:%M:%S', '%Y-%m-%d %H:%M:%S.%f', '%Y-%m-%d %H:%M', '%m/%d/%Y %H:%M:%S', '%m/%d/%Y %H:%M:%S.%f', '%m/%d/%Y %H:%M', '%m/%d/%y %H:%M:%S', '%m/%d/%y %H:%M:%S.%f', '%m/%d/%y %H:%M'] DATE_FORMAT = 'N j, Y' DATE_INPUT_FORMATS = ['%Y-%m-%d', '%m/%d/%Y', '%m/%d/%y', '%b %d %Y', '%b %d, %Y', '%d %b %Y', '%d %b, %Y', '%B %d %Y', '%B %d, %Y', '%d %B %Y', '%d %B, %Y'] DEBUG = False DEBUG_PROPAGATE_EXCEPTIONS = False DECIMAL_SEPARATOR = '.' DEFAULT_AUTO_FIELD = 'django.db.models.AutoField' DEFAULT_CHARSET = 'utf-8' DEFAULT_EXCEPTION_REPORTER = 'django.views.debug.ExceptionReporter' DEFAULT_EXCEPTION_REPORTER_FILTER = 'django.views.debug.SafeExceptionReporterFilter' DEFAULT_FILE_STORAGE = 'django.core.files.storage.FileSystemStorage' DEFAULT_FROM_EMAIL = 'pjbondi(a)systemdatabase.com' DEFAULT_INDEX_TABLESPACE = '' DEFAULT_TABLESPACE = '' DISALLOWED_USER_AGENTS = [] EMAIL_BACKEND = 'django.core.mail.backends.smtp.EmailBackend' EMAIL_HOST = 'localhost' EMAIL_HOST_PASSWORD = '********************' EMAIL_HOST_USER = '' EMAIL_PORT = 25 EMAIL_SSL_CERTFILE = None EMAIL_SSL_KEYFILE = '********************' EMAIL_SUBJECT_PREFIX = '[Django] ' EMAIL_TIMEOUT = None EMAIL_USE_LOCALTIME = False EMAIL_USE_SSL = False EMAIL_USE_TLS = False FILE_UPLOAD_DIRECTORY_PERMISSIONS = None FILE_UPLOAD_HANDLERS = ['django.core.files.uploadhandler.MemoryFileUploadHandler', 'django.core.files.uploadhandler.TemporaryFileUploadHandler'] FILE_UPLOAD_MAX_MEMORY_SIZE = 2621440 FILE_UPLOAD_PERMISSIONS = 420 FILE_UPLOAD_TEMP_DIR = None FILTER_VHOST = False FIRST_DAY_OF_WEEK = 0 FIXTURE_DIRS = [] FORCE_SCRIPT_NAME = None FORMAT_MODULE_PATH = None FORM_RENDERER = 'django.forms.renderers.DjangoTemplates' HAYSTACK_CONNECTIONS = {'default': {'PATH': '/opt/mailman/web/xapian_index', 'ENGINE': 'xapian_backend.XapianEngine'}} HYPERKITTY_ENABLE_GRAVATAR = True IGNORABLE_404_URLS = [] INSTALLED_APPS = ['hyperkitty', 'postorius', 'django_mailman3', 'django.contrib.admin', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.staticfiles', 'django.contrib.humanize', 'rest_framework', 'django_gravatar', 'compressor', 'haystack', 'django_extensions', 'django_q', 'allauth', 'allauth.account', 'allauth.socialaccount'] INTERNAL_IPS = [] LANGUAGES = [('af', 'Afrikaans'), ('ar', 'Arabic'), ('ar-dz', 'Algerian Arabic'), ('ast', 'Asturian'), ('az', 'Azerbaijani'), ('bg', 'Bulgarian'), ('be', 'Belarusian'), ('bn', 'Bengali'), ('br', 'Breton'), ('bs', 'Bosnian'), ('ca', 'Catalan'), ('ckb', 'Central Kurdish (Sorani)'), ('cs', 'Czech'), ('cy', 'Welsh'), ('da', 'Danish'), ('de', 'German'), ('dsb', 'Lower Sorbian'), ('el', 'Greek'), ('en', 'English'), ('en-au', 'Australian English'), ('en-gb', 'British English'), ('eo', 'Esperanto'), ('es', 'Spanish'), ('es-ar', 'Argentinian Spanish'), ('es-co', 'Colombian Spanish'), ('es-mx', 'Mexican Spanish'), ('es-ni', 'Nicaraguan Spanish'), ('es-ve', 'Venezuelan Spanish'), ('et', 'Estonian'), ('eu', 'Basque'), ('fa', 'Persian'), ('fi', 'Finnish'), ('fr', 'French'), ('fy', 'Frisian'), ('ga', 'Irish'), ('gd', 'Scottish Gaelic'), ('gl', 'Galician'), ('he', 'Hebrew'), ('hi', 'Hindi'), ('hr', 'Croatian'), ('hsb', 'Upper Sorbian'), ('hu', 'Hungarian'), ('hy', 'Armenian'), ('ia', 'Interlingua'), ('id', 'Indonesian'), ('ig', 'Igbo'), ('io', 'Ido'), ('is', 'Icelandic'), ('it', 'Italian'), ('ja', 'Japanese'), ('ka', 'Georgian'), ('kab', 'Kabyle'), ('kk', 'Kazakh'), ('km', 'Khmer'), ('kn', 'Kannada'), ('ko', 'Korean'), ('ky', 'Kyrgyz'), ('lb', 'Luxembourgish'), ('lt', 'Lithuanian'), ('lv', 'Latvian'), ('mk', 'Macedonian'), ('ml', 'Malayalam'), ('mn', 'Mongolian'), ('mr', 'Marathi'), ('ms', 'Malay'), ('my', 'Burmese'), ('nb', 'Norwegian Bokmål'), ('ne', 'Nepali'), ('nl', 'Dutch'), ('nn', 'Norwegian Nynorsk'), ('os', 'Ossetic'), ('pa', 'Punjabi'), ('pl', 'Polish'), ('pt', 'Portuguese'), ('pt-br', 'Brazilian Portuguese'), ('ro', 'Romanian'), ('ru', 'Russian'), ('sk', 'Slovak'), ('sl', 'Slovenian'), ('sq', 'Albanian'), ('sr', 'Serbian'), ('sr-latn', 'Serbian Latin'), ('sv', 'Swedish'), ('sw', 'Swahili'), ('ta', 'Tamil'), ('te', 'Telugu'), ('tg', 'Tajik'), ('th', 'Thai'), ('tk', 'Turkmen'), ('tr', 'Turkish'), ('tt', 'Tatar'), ('udm', 'Udmurt'), ('uk', 'Ukrainian'), ('ur', 'Urdu'), ('uz', 'Uzbek'), ('vi', 'Vietnamese'), ('zh-hans', 'Simplified Chinese'), ('zh-hant', 'Traditional Chinese')] LANGUAGES_BIDI = ['he', 'ar', 'ar-dz', 'ckb', 'fa', 'ur'] LANGUAGE_CODE = 'en-us' LANGUAGE_COOKIE_AGE = None LANGUAGE_COOKIE_DOMAIN = None LANGUAGE_COOKIE_HTTPONLY = False LANGUAGE_COOKIE_NAME = 'django_language' LANGUAGE_COOKIE_PATH = '/' LANGUAGE_COOKIE_SAMESITE = None LANGUAGE_COOKIE_SECURE = False LOCALE_PATHS = [] LOGGING = {'version': 1, 'disable_existing_loggers': False, 'filters': {'require_debug_false': {'()': 'django.utils.log.RequireDebugFalse'}}, 'handlers': {'mail_admins': {'level': 'ERROR', 'filters': ['require_debug_false'], 'class': 'django.utils.log.AdminEmailHandler'}, 'file': {'level': 'INFO', 'class': 'logging.handlers.WatchedFileHandler', 'filename': '/opt/mailman/web/logs/mailmanweb.log', 'formatter': 'verbose'}, 'console': {'class': 'logging.StreamHandler', 'formatter': 'simple'}}, 'loggers': {'django.request': {'handlers': ['mail_admins', 'file'], 'level': 'ERROR', 'propagate': True}, 'django': {'handlers': ['file'], 'level': 'ERROR', 'propagate': True}, 'hyperkitty': {'handlers': ['file'], 'level': 'DEBUG', 'propagate': True}, 'postorius': {'handlers': ['console', 'file'], 'level': 'INFO'}, 'q': {'level': 'WARNING', 'propagate': False, 'handlers': ['console', 'file']}}, 'formatters': {'verbose': {'format': '%(levelname)s %(asctime)s %(process)d %(name)s %(message)s'}, 'simple': {'format': '%(levelname)s %(message)s'}}} LOGGING_CONFIG = 'logging.config.dictConfig' LOGIN_REDIRECT_URL = 'list_index' LOGIN_URL = 'account_login' LOGOUT_REDIRECT_URL = None LOGOUT_URL = 'account_logout' MAILMAN_ARCHIVER_FROM = "('127.0.0.1', '::1')" MAILMAN_ARCHIVER_KEY = '********************' MAILMAN_REST_API_PASS = '********************' MAILMAN_REST_API_URL = '********************' MAILMAN_REST_API_USER = '********************' MANAGERS = [] MEDIA_ROOT = '' MEDIA_URL = '/' MESSAGE_STORAGE = 'django.contrib.messages.storage.fallback.FallbackStorage' MESSAGE_TAGS = {40: 'danger'} MIDDLEWARE = "('allauth.account.middleware.AccountMiddleware', 'django.contrib.sessions.middleware.SessionMiddleware', 'django.middleware.common.CommonMiddleware', 'django.middleware.csrf.CsrfViewMiddleware', 'django.middleware.locale.LocaleMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', 'django.contrib.messages.middleware.MessageMiddleware', 'django.middleware.clickjacking.XFrameOptionsMiddleware', 'django.middleware.security.SecurityMiddleware', 'django_mailman3.middleware.TimezoneMiddleware', 'postorius.middleware.PostoriusMiddleware')" MIGRATION_MODULES = {} MONTH_DAY_FORMAT = 'F j' NUMBER_GROUPING = 0 PASSWORD_HASHERS = '********************' PASSWORD_RESET_TIMEOUT = '********************' POSTORIUS_TEMPLATE_BASE_URL = 'http://localhost:8000' PREPEND_WWW = False Q_CLUSTER = {'retry': 360, 'timeout': 300, 'save_limit': 100, 'orm': 'default', 'workers': 2} ROOT_URLCONF = 'mailman_web.urls' SECRET_KEY = '********************' SECRET_KEY_FALLBACKS = '********************' SECURE_CONTENT_TYPE_NOSNIFF = True SECURE_CROSS_ORIGIN_OPENER_POLICY = 'same-origin' SECURE_HSTS_INCLUDE_SUBDOMAINS = False SECURE_HSTS_PRELOAD = False SECURE_HSTS_SECONDS = 0 SECURE_PROXY_SSL_HEADER = None SECURE_REDIRECT_EXEMPT = [] SECURE_REFERRER_POLICY = 'same-origin' SECURE_SSL_HOST = None SECURE_SSL_REDIRECT = False SERVER_EMAIL = 'pjbondi(a)systemdatabase.com' SESSION_CACHE_ALIAS = 'default' SESSION_COOKIE_AGE = 1209600 SESSION_COOKIE_DOMAIN = None SESSION_COOKIE_HTTPONLY = True SESSION_COOKIE_NAME = 'sessionid' SESSION_COOKIE_PATH = '/' SESSION_COOKIE_SAMESITE = 'Lax' SESSION_COOKIE_SECURE = False SESSION_ENGINE = 'django.contrib.sessions.backends.db' SESSION_EXPIRE_AT_BROWSER_CLOSE = False SESSION_FILE_PATH = None SESSION_SAVE_EVERY_REQUEST = False SESSION_SERIALIZER = 'django.contrib.sessions.serializers.JSONSerializer' SETTINGS_MODULE = 'settings' SHORT_DATETIME_FORMAT = 'm/d/Y P' SHORT_DATE_FORMAT = 'm/d/Y' SIGNING_BACKEND = 'django.core.signing.TimestampSigner' SILENCED_SYSTEM_CHECKS = [] SITE_ID = 1 SOCIALACCOUNT_PROVIDERS = {'openid': {'SERVERS': [{'id': 'yahoo', 'name': 'Yahoo', 'openid_url': 'http://me.yahoo.com'}]}, 'google': {'SCOPE': ['profile', 'email'], 'AUTH_PARAMS': {'access_type': 'online'}}, 'facebook': {'METHOD': 'oauth2', 'SCOPE': ['email'], 'FIELDS': ['email', 'name', 'first_name', 'last_name', 'locale', 'timezone'], 'VERSION': 'v2.4'}} STATICFILES_DIRS = '()' STATICFILES_FINDERS = "('django.contrib.staticfiles.finders.FileSystemFinder', 'django.contrib.staticfiles.finders.AppDirectoriesFinder', 'compressor.finders.CompressorFinder')" STATICFILES_STORAGE = 'django.contrib.staticfiles.storage.StaticFilesStorage' STATIC_ROOT = '/opt/mailman/web/static' STATIC_URL = '/static/' STORAGES = {'default': {'BACKEND': 'django.core.files.storage.FileSystemStorage'}, 'staticfiles': {'BACKEND': 'django.contrib.staticfiles.storage.StaticFilesStorage'}} TEMPLATES = [{'BACKEND': 'django.template.backends.django.DjangoTemplates', 'DIRS': [], 'APP_DIRS': True, 'OPTIONS': {'context_processors': ['django.template.context_processors.debug', 'django.template.context_processors.i18n', 'django.template.context_processors.media', 'django.template.context_processors.static', 'django.template.context_processors.tz', 'django.template.context_processors.csrf', 'django.template.context_processors.request', 'django.contrib.auth.context_processors.auth', 'django.contrib.messages.context_processors.messages', 'django_mailman3.context_processors.common', 'hyperkitty.context_processors.common', 'postorius.context_processors.postorius']}}] TEST_NON_SERIALIZED_APPS = [] TEST_RUNNER = 'django.test.runner.DiscoverRunner' THOUSAND_SEPARATOR = ',' TIME_FORMAT = 'P' TIME_INPUT_FORMATS = ['%H:%M:%S', '%H:%M:%S.%f', '%H:%M'] TIME_ZONE = 'UTC' USE_DEPRECATED_PYTZ = False USE_I18N = True USE_L10N = True USE_THOUSAND_SEPARATOR = False USE_TZ = True USE_X_FORWARDED_HOST = False USE_X_FORWARDED_PORT = False WSGI_APPLICATION = 'mailman_web.wsgi.application' X_FRAME_OPTIONS = 'DENY' YEAR_MONTH_FORMAT = 'F Y'

3 6

Errors in MM3
by Odhiambo Washington April 7, 2025

April 7, 2025

I am using uwsgi+APache2. I am suddenly seeing hundreds of errors in my mailmanweb and uwsgi logfiles: 1. mailmanweb.log has hundreds of such lines: [WARNING] [2025-04-07 13:01:50,162] [log] 317562 139768548886080 Method Not Allowed (GET): /archives/list/ kictanet@lists.kictanet.or.ke/message/YOPKCEWPHX4BV7U5MOTCVCNSWR2J2JOZ/vote [WARNING] [2025-04-07 13:02:30,455] [log] 317562 139768479348416 Method Not Allowed (GET): /archives/list/ kictanet@lists.kictanet.or.ke/message/L2X657PY3WAKSCJM2UNA25GKRN2J2VMX/vote [WARNING] [2025-04-07 13:02:35,482] [log] 317562 139768548886080 Method Not Allowed (GET): /archives/list/ kictanet@lists.kictanet.or.ke/message/2E34EDF6YJH4K4KARA7MEHLD5USXR5E3/vote [WARNING] [2025-04-07 13:02:37,567] [log] 317562 139768548886080 Method Not Allowed (GET): /archives/list/ kictanet@lists.kictanet.or.ke/thread/MICNFIHVLOETVE4PXEDO5MBYWG7SN57H/favorite [WARNING] [2025-04-07 13:02:46,161] [log] 317562 139768548886080 Method Not Allowed (GET): /archives/list/ kictanet@lists.kictanet.or.ke/message/TB5CV4GPCUGNP7X2YGYVZJQVOPQTGHD7/vote [WARNING] [2025-04-07 13:03:14,478] [log] 317562 139768548886080 Method Not Allowed (GET): /archives/list/ kictanet@lists.kictanet.or.ke/message/YOPMHB3GR4Y24EP7ZCPO2D7TABK4GSKZ/vote [WARNING] [2025-04-07 13:03:26,857] [log] 317562 139768548886080 Method Not Allowed (GET): /archives/list/ kictanet@lists.kictanet.or.ke/message/TM4NSQM3TTORRJCJS3KMAFYF4LWU3ZHH/vote [WARNING] [2025-04-07 13:04:02,219] [log] 317562 139768548886080 Method Not Allowed (GET): /archives/list/ kictanet@lists.kictanet.or.ke/message/EWO4G2AX5PYSBIC4OCQLHWINUWB7VDKV/vote [WARNING] [2025-04-07 13:04:09,255] [log] 317562 139768548886080 Method Not Allowed (GET): /archives/list/ kictanet@lists.kictanet.or.ke/thread/7657MIXEJG2CIO6327OAX45POCZSBN3K/favorite [WARNING] [2025-04-07 13:07:38,150] [log] 317562 139768548886080 Method Not Allowed (GET): /archives/list/ kictanet@lists.kictanet.or.ke/message/EU3WXXM6TSYOXV4JKBGFEL5EIU52G7XG/vote [WARNING] [2025-04-07 13:08:16,952] [log] 317562 139768548886080 Method Not Allowed (GET): /archives/list/ kictanet@lists.kictanet.or.ke/thread/IXNYG4H4CCVGMMTASEOIUMB5SUHZRCE7/favorite [WARNING] [2025-04-07 13:08:18,448] [log] 317562 139768548886080 Method Not Allowed (GET): /archives/list/ kictanet@lists.kictanet.or.ke/message/DXHE36JPN7INSTKU5N7W5R6O52AF3S2H/vote [WARNING] [2025-04-07 13:08:23,676] [log] 317562 139768548886080 Method Not Allowed (GET): /archives/list/ kictanet@lists.kictanet.or.ke/message/JGKERN3UETOSFGUX4QKA6QXFLD47ROW5/vote [WARNING] [2025-04-07 13:08:48,557] [log] 317562 139768548886080 Method Not Allowed (GET): /archives/list/ kictanet@lists.kictanet.or.ke/message/2BOOIT4FXCIMBHHRE5STC7OYLDAY3UTS/vote uwsgi-error.log has hundreds of such lines: --Mon Apr 7 14:02:23 2025 - uwsgi_response_writev_headers_and_body_do(): Broken pipe [core/writer.c line 306] during GET /archives/list/ kictanet(a)lists.kictanet.or.ke/message/KXMZK5NKWQHHPEAM5OGELD5HTISI4R3D/ (47.79.5.207) OSError: write error Mon Apr 7 14:02:23 2025 - uwsgi_response_writev_headers_and_body_do(): Broken pipe [core/writer.c line 306] during GET /archives/list/ kictanet(a)lists.kictanet.or.ke/thread/3QYS53EQIZS3WX5BSAX57HTDEUSEZ2T6/ (47.79.1.203) OSError: write error Mon Apr 7 14:02:23 2025 - uwsgi_response_writev_headers_and_body_do(): Broken pipe [core/writer.c line 306] during GET /archives/list/ kictanet@lists.kictanet.or.ke/message/BIVJX3ACXY332PMQ4ON5AHS7YRENUKDY/attachment/2/attachment.html (47.82.11.120) OSError: write error Mon Apr 7 14:02:23 2025 - uwsgi_response_writev_headers_and_body_do(): Broken pipe [core/writer.c line 306] during GET /accounts/google/login/?next=/archives/list/ users@exim4u.org/message/JRWZKRUM6MLRYC6U5GV4OCQ7TN7JJHVQ/&process=login (52.1.157.90) OSError: write error Mon Apr 7 14:02:23 2025 - uwsgi_response_writev_headers_and_body_do(): Broken pipe [core/writer.c line 306] during GET /archives/list/ kictanet(a)lists.kictanet.or.ke/thread/BSWHEQ3UBN266F3EYL7ROPMIDN5IH4DU/ (47.79.122.22) OSError: write error Mon Apr 7 14:02:23 2025 - uwsgi_response_writev_headers_and_body_do(): Broken pipe [core/writer.c line 306] during GET /archives/list/ kictanet(a)lists.kictanet.or.ke/thread/F44UL7CUV2EJXEABMZRVUFUBWMK327TS/ (47.79.1.223) OSError: write error Mon Apr 7 14:02:23 2025 - uwsgi_response_writev_headers_and_body_do(): Broken pipe [core/writer.c line 306] during GET /archives/list/ kictanet(a)lists.kictanet.or.ke/thread/HXODIXNXW6HILG2OLT3J2Q3AEUAQKRXP/ (47.79.7.122) OSError: write error Mon Apr 7 14:02:24 2025 - uwsgi_response_writev_headers_and_body_do(): Broken pipe [core/writer.c line 306] during GET /archives/list/ kictanet(a)lists.kictanet.or.ke/message/C6VTIVNOIOXXWZPBZ7VAJFEFNPHLO326/ (47.82.11.47) OSError: write error Any clues as to what needs to be done to mitigate the above? __ Best regards, Odhiambo WASHINGTON, Nairobi,KE +254 7 3200 0004/+254 7 2274 3223 In an Internet failure case, the #1 suspect is a constant: DNS. "Oh, the cruft.", egrep -v '^$|^.*#' ¯\_(ツ)_/¯ :-) [How to ask smart questions: http://www.catb.org/~esr/faqs/smart-questions.html]

2 1

Mailman3 OOM and high CPU usage
by Prasanth Nair April 7, 2025

April 7, 2025

Hi team, Our Mailman3 server crashes with OOM and high CPU usage. As soon as we start the mailmanweb service (uwsgi process), the system crashes. It was working fine, but this issue started recently. We haven't changed any recently. Any idea how to fix this? or any suggestions? Look forward to hearing from you soon. Kind regards, Prasanth Nair

2 2

bypassing rules on an individual basis
by dlb-ml＠anl.gov April 4, 2025

April 4, 2025

I have a mailing list that, due to specific circumstances, has a requirement to allow messages from a user that sends messages with no subject. I've added the address to the "Accept these non-members" collection, but messages from that address still get held for moderation, due to the no-subect rule. https://docs.mailman3.org/projects/mailman/en/latest/src/mailman/rules/docs… https://docs.mailman3.org/projects/mailman/en/latest/src/mailman/rules/docs… I went through the list's interface, and I wasn't able to find a mechanism to disable the rule, aside from editing the code itself. I also added header filters to immediately accept the message, but they still get held. Specifically, the rules I defined are: Header, Pattern, Action subject, ^Subject:\s*([[{(]?no[_ ]subject[]})]?)?\s*$, Accept Immediately subject, ^Subject:, Accept Immediately subject, ^, Accept Immediately Did I configure this correctly and/or is this the right course of action? Is there a better way to bypass this rule? Thanks

4 6

Change delivery_status in bulk
by Hitashi mancho April 4, 2025

April 4, 2025

Dear All, We have a Mailman3 instance with around 500 mailing lists. Most of the mailing lists have 5000 subscribers. Because of some misconfiguration in the postfix, posting for 1000 users has been bounced. Until we realized what happened, the mailman had set delivery_status to "disabled_by_bounces." for many subscribers. Now, I am unable to locate any command or an API call through which I can change the delivery_status back to enabled for 1000+ users. Can you please guide me on how I can do this programmatically using cli (I will write a bash script) or using an API call? Regards, Hitachi.

2 2

Moderator e-mails only going out once a day
by jkoral＠luc.edu April 4, 2025

April 4, 2025

Hi, I have just got done migrating from MM2 to MM3 and the users are experiencing issues with their moderated messages. After the message is sent, the moderator does not know about the message until the next day. I checked the maillogs and all those messages are being sent at the same time around midnight. I also noticed the messages are being sent from user(a)example.com, which I switched in /etc/mailman3/mailman.cfg to a generic e-mail address. Is there a way to change those moderator e-mails to send right away? Does having user(a)example.com in the config affect that? Thank you in advance, Joe

3 19

compatibility of mailman 3.3.10 with mariadb 11.4 LTS
by Chandrakant Pandey April 2, 2025

April 2, 2025

Whether mailman 3.3.10 is compatible with mariadb 11.4 LTS

3 3

Regarding nested mailing lists in mailman 3
by Chandrakant Pandey April 2, 2025

April 2, 2025

Hi, I want to know whether we can setup nested mailing lists in mailman 3 which we used to do in mailman 2. like ep2021@iitb.ac.in,ep2022@iitb.ac.in,ep2023@iitb.ac.in mailing lists exist and we add all this mailing lists as member in ep(a)iitb.ac.in. Whether this kind of nested mailing lists work ? --chandrakant

3 2

mailman3 on new Debian 12 installation, got ssl apache working on all URLs except /mailman3
by Philip Bondi April 1, 2025

April 1, 2025

Hello to all: Giant thank you to the community, Mark, Stephen, everyone. I have a lot of follow-up tasks in previous posts. Blazing forward on critical path flaws, first. I require a Debian 12 VM that supports: - Subversion - Let's Encrypt and required challenges - IMAP server - mailman3 - DKIM server I found this post helpful. https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… I think I've noticed that posters avoid less than sign and express as html. I hacked it into this, which I tried to anonymize. My alias /static/ had to point to different location for my installation. I have ssl working for Subversion and my Let's Encrypt challenges. And 6 of those ProxyPass seem to work through ssl, except for /mailman3. That fails. Surfing to example.com/mailman3 gets. Service Unavailable The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later. <IfModule mod_ssl.c> <VirtualHost *:80> ServerName example.com Redirect permanent / https://example.com/ DocumentRoot /var/www/html/example.com/ </VirtualHost> <VirtualHost *:443> SSLEngine on ServerAdmin pjbondi(a)systemdatabase.com ServerName example.com ServerAlias www.example.com DocumentRoot /var/www/html/example.com/ ErrorLog ${APACHE_LOG_DIR}/example.com_error.log CustomLog ${APACHE_LOG_DIR}/example.com_access.log combined Include /etc/letsencrypt/options-ssl-apache.conf SSLCertificateFile /etc/letsencrypt/live/example.com-0001/fullchain.pem SSLCertificateKeyFile /etc/letsencrypt/live/example.com-0001/privkey.pem Alias /static/ /opt/mailman/web/static/ <Directory "/opt/mailman/web/static/"> Require all granted </Directory> <IfModule mod_headers.c> RequestHeader unset X-Forwarded-Proto <If "%{HTTPS} =~ /on/"> RequestHeader set X-Forwarded-Proto "https" </If> </IfModule> <IfModule mod_proxy.c> ProxyPreserveHost On ProxyPass "/postorius" "http://127.0.0.1:8000/postorius" ProxyPass "/hyperkitty" "http://127.0.0.1:8000/hyperkitty" ProxyPass "/accounts" "http://127.0.0.1:8000/accounts" ProxyPass "/admin" "http://127.0.0.1:8000/admin" ProxyPass "/user-profile" "http://127.0.0.1:8000/user-profile" ProxyPass "/mailman3" "http://127.0.0.1:8000/mailman3" ProxyPass "/archives" "http://127.0.0.1:8000/archives" # https://github.com/maxking/docker-mailman/issues/525 #ProxyPass / unix:/run/mailman3-web/uwsgi.sock|uwsgi://localhost/ #ProxyPassReverse / unix:/run/mailman3-web/uwsgi.sock|uwsgi://localhost/ #ProxyPassMatch "^/$" "http://127.0.0.1:8000/mailman3" </IfModule> </VirtualHost> </IfModule> I was noticing that there's no mailman3 sub-dir, here. I tried changing to http://127.0.0.1:8000/django-mailman3, but that didn't work. (venv) mailman@shackleton12:~$ ls -alF /opt/mailman/web/static/ total 40 drwxr-xr-x 10 mailman mailman 4096 Mar 24 16:03 ./ drwxr-xr-x 4 root root 4096 Mar 24 16:01 ../ drwxr-xr-x 3 mailman mailman 4096 Mar 24 16:03 account/ drwxr-xr-x 5 mailman mailman 4096 Mar 24 16:03 admin/ drwxr-xr-x 4 mailman mailman 4096 Mar 25 08:07 CACHE/ drwxr-xr-x 5 mailman mailman 4096 Mar 24 16:03 django_extensions/ drwxr-xr-x 5 mailman mailman 4096 Mar 24 16:03 django-mailman3/ drwxr-xr-x 6 mailman mailman 4096 Mar 24 16:03 hyperkitty/ drwxr-xr-x 6 mailman mailman 4096 Mar 24 16:03 postorius/ drwxr-xr-x 7 mailman mailman 4096 Mar 24 16:03 rest_framework/ Any ideas? What log file should I share? I've looked at apache and uwsgi logs, but I don't know what's relevant. I cannot seem to find an error in logs around mailman3 URL

4 10

Install Mailman 3.x Core on Alma Linux 9 / CloudLinux
by pineyscripter＠gmail.com March 30, 2025

March 30, 2025

Has anyone actually done this ? Want to use Exim and MariaDB

3 3

"Something went wrong" HTTP Error 500: {"title": "500 Internal Server Error"}
by zachr＠mta.ca March 27, 2025

March 27, 2025

Thanks for any help in advance! server: Used this guide: https://docs.mailman3.org/en/latest/install/virtualenv.html#nginx-configura… ubuntu 24.04 Django UWSGI Gunicorn Nginx SQLite DB Ive had a look at historical posts and I think this might be related to this issue: https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… but Im not exactly sure. I only have one list on the server and I am encountering this issue. All other pages work fine. This is is the output of the mailman log: ----------------------------------------------------------------------------------------------------------------- 2025-03-21 16:49:30 [FALCON] [ERROR] GET /3.1/lists/csdopstest.test.com/archivers => Traceback (most recent call last): File "falcon/app.py", line 440, in falcon.app.App.__call__ File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/rest/lists.py", line 425, in on_get archiver_set = IListArchiverSet(self._mlist) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/zope/component/_api.py", line 167, in adapter_hook return sitemanager.queryAdapter(object, interface, name, default) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/zope/interface/registry.py", line 363, in queryAdapter return self.adapters.queryAdapter(object, interface, name, default) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/database/transaction.py", line 106, in wrapper return function(args[0], config.db.store, *args[1:], **kws) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/model/mailinglist.py", line 647, in __init__ for archiver in config.archivers: File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/config/config.py", line 284, in archivers archiver = call_name(class_path) ^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/utilities/modules.py", line 70, in call_name return named_callable(*args, **kws) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/mailman_hyperkitty/__init__.py", line 60, in __init__ self._load_conf() File "/opt/mailman/venv/lib/python3.12/site-packages/mailman_hyperkitty/__init__.py", line 87, in _load_conf self._conf["api_key"] = archiver_config.get("general", "api_key") ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/configparser.py", line 777, in get return self._interpolation.before_get(self, section, option, value, ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/configparser.py", line 367, in before_get self._interpolate_some(parser, option, L, value, section, defaults, 1) File "/usr/lib/python3.12/configparser.py", line 414, in _interpolate_some raise InterpolationSyntaxError( configparser.InterpolationSyntaxError: '%' must be followed by '%' or '(', found: '%#$%sfdgs' ----------------------------------------------------------------------------------------------------------------- Should I try the fix in the post mentioned above or is this a different issue? Cheers

3 4

No emails distributed after mail received for a new list following https://docs.list.org/en/latest/install/virtualenv.html on new mailman3 Debian 12 installation
by Philip Bondi March 27, 2025

March 27, 2025

Hello to all: I require a Debian 12 VM that supports: - Subversion - Let's Encrypt and required challenges - IMAP server - mailman3 - DKIM server I'm currently running same on a CentOS 7.x VM. So that needs to be retired/migrated sooner rather than later because CentOS is out-of-support. On the Debian 12 VM other services appear to be setup and working. mailman3 is the 2nd last service that I'm standing up. In this moment, I've been able to follow https://docs.list.org/en/latest/install/virtualenv.html and https://docs.list.org/en/latest/config-web.html I have mailman3 and mailmanweb services running successfully. I have not yet been able to integrate mailmanweb into Apache (probably because of the Subversion and Let's Encrypt requirements). But I'm able to access local Postorius instance and configure a superuser and a list with web browser running locally on Debian 12 VM. My list is named ebill. An email was received for the DL, but not distributed. Can you advise how to troubleshoot from here? Mar 25 15:23:04 shackleton12 postfix/smtpd[247708]: connect from smtprelay0015.hostedemail.com[216.40.44.15] Mar 25 15:23:04 shackleton12 postfix/smtpd[247708]: Anonymous TLS connection established from smtprelay0015.hostedemail.com[216.40.44.15]: TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (prime256v1) server-digest SHA256 Mar 25 15:23:04 shackleton12 postfix/smtpd[247708]: 3CD47189B: client=smtprelay0015.hostedemail.com[216.40.44.15] Mar 25 15:23:04 shackleton12 postfix/cleanup[247722]: 3CD47189B: message-id=<a7aee014-f200-4bd4-bbc4-bc9f37abb6df(a)systemdatabase.com> Mar 25 15:23:04 shackleton12 postfix/qmgr[241822]: 3CD47189B: from=<pjbondi(a)systemdatabase.com>, size=3238, nrcpt=1 (queue active) Mar 25 15:23:04 shackleton12 postfix/smtpd[247708]: disconnect from smtprelay0015.hostedemail.com[216.40.44.15] ehlo=2 starttls=1 mail=1 rcpt=1 data=1 quit=1 commands=7 Mar 25 15:23:04 shackleton12 postfix/lmtp[247723]: 3CD47189B: to=<ebill(a)systemdatabase.ca>, relay=127.0.0.1[127.0.0.1]:8024, delay=0.29, delays=0.06/0.03/0.02/0.19, dsn=2.0.0, status=sent (250 Ok) Mar 25 15:23:04 shackleton12 postfix/qmgr[241822]: 3CD47189B: removed root@shackleton12:~# postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no compatibility_level = 3.6 inet_protocols = ipv4 local_recipient_maps = hash:/opt/mailman/mm/var/data/postfix_lmtp mailbox_size_limit = 0 mailbox_transport = lmtp:unix:private/dovecot-lmtp masquerade_domains = systemdatabase.ca mydestination = $myhostname, systemdatabase.ca, localhost.systemdatabase.ca, localhost, systemdatabase.homelinux.com mydomain = systemdatabase.ca myhostname = systemdatabase.ca mynetworks = 127.0.0.0/8 myorigin = systemdatabase.ca owner_request_special = no proxy_interfaces = 192.168.1.8 readme_directory = no recipient_delimiter = + relay_domains = hash:/opt/mailman/mm/var/data/postfix_domains relayhost = [smtp.bellnet.ca]:25 smtp_tls_loglevel = 1 smtp_tls_mandatory_protocols = !SSLv2, !SSLv3, !TLSv1, !TLSv1.1 smtp_tls_protocols = !SSLv2, !SSLv3, !TLSv1, !TLSv1.1 smtp_tls_security_level = may smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) smtpd_recipient_restrictions = permit_mynetworks permit_sasl_authenticated reject_unauth_destination permit_inet_interfaces smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination permit_inet_interfaces smtpd_tls_cert_file = /etc/letsencrypt/live/systemdatabase.ca-0001/fullchain.pem smtpd_tls_key_file = /etc/letsencrypt/live/systemdatabase.ca-0001/privkey.pem smtpd_tls_loglevel = 1 smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3, !TLSv1, !TLSv1.1 smtpd_tls_protocols = !SSLv2, !SSLv3, !TLSv1, !TLSv1.1 smtpd_tls_security_level = may smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtputf8_enable = no transport_maps = hash:/opt/mailman/mm/var/data/postfix_lmtp unknown_local_recipient_reject_code = 550

3 3

remove website example.com via django interface
by Alexander Inzinger-Zrock March 27, 2025

March 27, 2025

remove website 'example.com' via django interface or "how to rush jourself off your feet" **Disclaimer: don't try this at home** in believe to replace the display of 'example.com' in the postorius-webinterface i logged into django-interface, under 'website' (very bottom of the left menu) i added my new website and then deleted 'example.com'. Result: i can't access my webinterfaces any more, neither django nor postorius. Questions: 1. Does somebody know about the correct approach to change the displayed url in the postorius-webinterface? 2. does somebody perhaps know how to revert those removal via CLI or other ways? greetings aiz

2 2

Unsubscribe from a list
by pau.baiges＠csuc.cat March 26, 2025

March 26, 2025

Hello, When a list member sends an email to list-leave@... to unsubscribe from a list, neither the moderators nor the list owners receive it. Only the person who sent the email receives a confirmation email.

3 4

Disable deletion of list in Postorious
by Julian Kippels March 26, 2025

March 26, 2025

Hi, I would like to configure Postorious in a way to disable the functionality to delete a list. Is there a way to do this? Thanks Julian

3 2

Disabling the version disclosure.
by ninad＠iitb.ac.in March 25, 2025

March 25, 2025

Dear All, I recently installed Mailman3. I am new to MM3. As per my organization's policy, I need to turn off the version disclosure of Mailman Core, Postorius, and Hyperkitty. Specifically shown in the footer and in the system information page. Please let me know if there are any settings that I can set. I don't want to change any html code for the same. Please guide me in this regard.

2 3

Problem with uwsgi --ini /etc/mailman3/uwsgi.ini while following https://docs.list.org/en/latest/install/virtualenv.html on new mailman3 Debian 12 installation
by Philip Bondi March 25, 2025

March 25, 2025

Hello to all: Even though I have mailman3-web and mailman3-full packages installed, it feels like everything is working properly up to this point. What is supposed to be the correct outcome of https://docs.list.org/en/latest/install/virtualenv.html#setting-up-a-wsgi-s… ? When I execute the command, uwsgi --ini /etc/mailman3/uwsgi.ini, it hangs without output. (venv) mailman@shackleton12:~$ uwsgi --ini /etc/mailman3/uwsgi.ini [uWSGI] getting INI configuration from /etc/mailman3/uwsgi.ini ^C(venv) mailman@shackleton12:~$ Hmm. I'm wondering if I should remove mailman3-web package. And start from step https://docs.list.org/en/latest/install/virtualenv.html#installing-web-ui

1 1

Problem with perms on /etc/mailman3/mailman.cfg while following https://docs.list.org/en/latest/install/virtualenv.html on new mailman3 Debian 12 installation
by Philip Bondi March 25, 2025

March 25, 2025

Hello to all: Trying to install mailman3 for the first time on Debian 12 virtual machine. I tried to search for relevant and related posts, but could not find any. I'm following along the documentation and I get stuck after this step https://docs.list.org/en/latest/install/virtualenv.html#setup-mailman-user I'm finding that there's a problem while trying to edit /etc/mailman3/mailman.cfg The instructions https://docs.list.org/en/latest/install/virtualenv.html#installing-mailman-… do not say what to do with existing file. root@shackleton12:~# ls -alF /etc/mailman3/mailman.cfg -rw-r--r-- 1 root list 11119 Mar 20 11:45 /etc/mailman3/mailman.cfg Should we move the /etc/mailman3/mailman.cfg out of the way and create new file as user and group mailman:mailman ?

2 2

Error when sending customized welcome message template
by Markus Grandpré March 25, 2025

March 25, 2025

Dear List, As soon as a template "[list:user:notice:welcome]" exists, and at least one email address is provided during mass subscribe, while sending an invitation is disabled and sending a welcome message is enabled, the following error occurs: HTTP Error 400: ('Connection aborted.', ConnectionResetError(104, 'Connection reset by peer')) The new member(s) are added to the mailing list, but the welcome message is not sent. In the log file </var/log/mailman3/mailman.log>, I find: --------------- >8 --------------- [13/Mar/2025:08:09:49 +0100] "GET /3.1/lists/testliste.mailman.uni-konstanz.de HTTP/1.1" 200 422 "-" "GNU Mailman REST client v3.3.5" Mar 13 08:09:49 2025 (1072) deque: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 705, in urlopen httplib_response = self._make_request( ^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 388, in _make_request self._validate_conn(conn) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 1050, in _validate_conn conn.connect() File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 414, in connect self.sock = ssl_wrap_socket( ^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/urllib3/util/ssl_.py", line 449, in ssl_wrap_socket ssl_sock = _ssl_wrap_socket_impl( ^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/urllib3/util/ssl_.py", line 493, in _ssl_wrap_socket_impl return ssl_context.wrap_socket(sock, server_hostname=server_hostname) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.11/ssl.py", line 517, in wrap_socket return self.sslsocket_class._create( ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.11/ssl.py", line 1108, in _create self.do_handshake() File "/usr/lib/python3.11/ssl.py", line 1379, in do_handshake self._sslobj.do_handshake() ConnectionResetError: [Errno 104] Connection reset by peer During handling of the above exception, another exception occurred: During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/requests/adapters.py", line 489, in send resp = conn.urlopen( ^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 789, in urlopen retries = retries.increment( ^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/urllib3/util/retry.py", line 552, in increment raise six.reraise(type(error), error, _stacktrace) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/six.py", line 718, in reraise raise value.with_traceback(tb) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 705, in urlopen httplib_response = self._make_request( ^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 388, in _make_request self._validate_conn(conn) File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 1050, in _validate_conn conn.connect() File "/usr/lib/python3/dist-packages/urllib3/connection.py", line 414, in connect self.sock = ssl_wrap_socket( ^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/urllib3/util/ssl_.py", line 449, in ssl_wrap_socket ssl_sock = _ssl_wrap_socket_impl( ^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/urllib3/util/ssl_.py", line 493, in _ssl_wrap_socket_impl return ssl_context.wrap_socket(sock, server_hostname=server_hostname) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.11/ssl.py", line 517, in wrap_socket return self.sslsocket_class._create( ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.11/ssl.py", line 1108, in _create self.do_handshake() File "/usr/lib/python3.11/ssl.py", line 1379, in do_handshake self._sslobj.do_handshake() urllib3.exceptions.ProtocolError: ('Connection aborted.', ConnectionResetError(104, 'Connection reset by peer')) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/mailman/app/workflow.py", line 69, in __next__ return step() ^^^^^^ File "/usr/lib/python3/dist-packages/mailman/app/subscriptions.py", line 362, in _step_do_subscription self.member = self.mlist.subscribe( ^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/mailman/database/transaction.py", line 106, in wrapper return function(args[0], config.db.store, *args[1:], **kws) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/mailman/model/mailinglist.py", line 539, in subscribe notify(SubscriptionEvent( File "/usr/lib/python3/dist-packages/zope/event/__init__.py", line 32, in notify subscriber(event) File "/usr/lib/python3/dist-packages/mailman/app/membership.py", line 183, in handle_SubscriptionEvent send_welcome_message(mlist, member, member.preferred_language) File "/usr/lib/python3/dist-packages/mailman/app/notifications.py", line 79, in send_welcome_message welcome_message = wrap(getUtility(ITemplateLoader).get( ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/mailman/model/template.py", line 192, in get contents = getUtility(ITemplateManager).get( ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/mailman/database/transaction.py", line 106, in wrapper return function(args[0], config.db.store, *args[1:], **kws) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/mailman/model/template.py", line 114, in get contents = protocols.get(actual_uri, **auth) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/mailman/utilities/protocols.py", line 39, in get response = requests.get(url, timeout=REQUEST_TIMEOUT, **kws) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/requests/api.py", line 73, in get return request("get", url, params=params, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/requests/api.py", line 59, in request return session.request(method=method, url=url, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/requests/sessions.py", line 587, in request resp = self.send(prep, **send_kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/requests/sessions.py", line 701, in send r = adapter.send(request, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/requests/adapters.py", line 547, in send raise ConnectionError(err, request=request) requests.exceptions.ConnectionError: ('Connection aborted.', ConnectionResetError(104, 'Connection reset by peer')) [13/Mar/2025:08:09:49 +0100] "POST /3.1/members HTTP/1.1" 400 125 "-" "GNU Mailman REST client v3.3.5" [13/Mar/2025:08:09:49 +0100] "GET /3.1/lists/testliste(a)mailman.uni-konstanz.de/requests/count?token_owner=moderator HTTP/1.1" 200 73 "-" "GNU Mailman REST client v3.3.5" [13/Mar/2025:08:09:49 +0100] "GET /3.1/lists/testliste(a)mailman.uni-konstanz.de/held/count HTTP/1.1" 200 73 "-" "GNU Mailman REST client v3.3.5" --------------- 8< --------------- If no template "[list:user:notice:welcome]" exists, the default welcome message is sent without an error. Could you please help me to solve this issue? Your help would be much appreciated. Best regards, Markus Grandpré -- Markus Grandpré Mailinglisten-Administration, Universität Konstanz Kommunikations-, Informations-, Medienzentrum (KIM) Abteilung IT-Dienste Forschung, Lehre und Infrastruktur, Tel: ++49 7531 88 4342 -- Markus Grandpré Universität Konstanz Kommunikations-, Informations-, Medienzentrum (KIM) Abteilung IT-Dienste Forschung, Lehre und Infrastruktur, Tel: ++49 7531 88 4342

3 4

Visibility of list members for list members
by Andreas Barth March 22, 2025

March 22, 2025

Hi, is it possible to make the list of members available to all list members? Or should I raise a feature request (and if, for which tool)? Regards, Andi

2 2

Bounce of HCL Notes invitations - CloseBoundaryNotFoundDefect() - 501 Message has defects (in reply to end of DATA command)
by Ulf R. March 21, 2025

March 21, 2025

Hello, after switching from mailman2.1 to mailman3 mails with HCL Notes invitations are failing. The full error message is: 2025-03-20T15:19:13.111419+01:00 mailman1 postfix/lmtp[119104]: 139D6400AF: to=<mylist(a)lists.mydomain.com>, relay=127.0.0.1[127.0.0.1]:8024, delay=0.01 , delays=0/0/0/0.01, dsn=5.0.0, status=bounced (host 127.0.0.1[127.0.0.1] said: 501 Message has defects (in reply to end of DATA command)) I have tried the deeper debug explainded here: https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message… The result is: mailman shell ... >>> import email >>> from mailman.email.message import Message >>> msg = email.message_from_binary_file(open('notestermin.eml', 'rb'), Message) >>> msg.defects [CloseBoundaryNotFoundDefect()] Is there a quick fix for this available? Is it a problem of the python code or the format of the HCL Notes Server? In the .eml file I see 25 header fields calles "X-Notes-Item". May be it is an overflow? Any ideas? Thank you and regards, Ulf

2 2

How to change the showed URL/Domain of archives navbar?
by Ulf R. March 18, 2025

March 18, 2025

Hello, our first Domain was lists-test.mydomain.de. After this we added our real domain lists.mydomain.de and our migration from mailman2.1 has finished :-) When you go to lists-test.mydomain.de/archives/ in the the navbar only the name of our first test-domain is shown (lists-test.mydomain.de). How can we set the other domain there? I have tried to change the order of our two domains in the settings.py - without success. Our domains are: lists-test.mydomain.de has SITE_ID = 1 lists.mydomain.de has SITE_ID = 2 Thank you and regards, Ulf

2 1

settings.ACCOUNT_EMAIL_REQUIRED is deprecated in allauth-65.5.0
by Andreas Vetter March 18, 2025

March 18, 2025

After updating django-allauth to django-allauth-65.5.0 the system complains: System check identified some issues: WARNINGS: ?: settings.ACCOUNT_EMAIL_REQUIRED is deprecated, use: settings.ACCOUNT_SIGNUP_FIELDS = ['email*', 'username*', 'password1*', 'password2*'] Old setting in mailman_web/settings/mailman.py is ACCOUNT_EMAIL_REQUIRED = True What would be the correct setting for the new ACCOUNT_SIGNUP_FIELDS ? -- Mit freundlichen Gruessen, Andreas Vetter

2 2

Postorius Suggestion: Give owner a view of all users of all owned lists
by Stephen J. Turnbull March 14, 2025

March 14, 2025

Andreas Vetter writes: > A list of all addresses subscribed to all lists owned by the logged > in person. This is starting to take a better form. It's still very specialized, so I'm starting to wonder if trying to add it to Postorius is a great idea. Of course if people are coming in over the network, you don't want to reproduce all the authentication and authorization logic implemented in Django and Postorius. That may as well be done in Django, and if you're doing Django it may as well be Postorius too. But if you're in a single sign-on environment so presence in the network implies strong authentication, you will get more flexibility from local scripts using mailmanclient, or if you're confident in security access to the REST API directly. Just putting that out for your consideration, since implementing what is taking shape here would take quite some time as the folks skilled with Postorius are not so active these days. > Owner is the primary target group for that. But since it should be > a tool for managing subscriptions in a simple way, it might also be > of interest for superusers. For me as a superuser it would make > life easier. [...] > Ah, I see the problem and agree: So, the presentation should have a > sorted and searchable list of addresses and a Button next to each > address, maybe labeled "Subscriptions". Looking at your description above, for superusers that is basically the Users tab, though. Users are identified by primary address, and you'd not see alternate addresses in the list. But presumably your internal users use their @your.org addresses as primary. Can you make clear what could be more streamlined for your use cases as superuser? I give one example below, maybe that's what you're mostly interested in. The caveats about access to User objects still apply for owners, so even if they look the same (which is a good UX idea if owner functionality is a subset of superuser functionality, also they might even be able to share the basic page templates), the implementation is going to be rather different. I suspect you superusers would be quite frustrated if using the "subscribe all these lists" functionality meant you couldn't get at the User object without going to a different page. I do see one weird thing: you can't manipulate subscription itself from the User page as seen by the superuser from that list, only toggle moderation and delivery mode. I guess that's reasonable for a lot of use cases, though. I've never wanted to do a subscribe or unsubscribe from there. I always have a long list of users to subscribe to specific lists, never a list of lists a specific user should belong to, > The presentation given when above "Subscriptions" Button is clicked > should contain the address as kind of Headline. Then a table of > all lists of the logged in owner and next to each mailing list an > indication, if the address is subscribed or not and a Button to > toggle subscription/unsubscription. May be a single Toggle Button > or (maybe better) two buttons, a suscribe and a unsubscribe button, > where one is greyed out. This would not work with the current User page as presented to a superuser, that's true. The current presentation is quite suited to its purpose, with sections for Addresses, Subscriptions, Ownership, and Delete User in that order. But especially for superusers, there are plenty of sites with thousands, even tens of thousands of lists, and even a paged or scrollable presentation would be awful UI, and the potential for a disastrous mistake using "do all" is high. > In addition my owners would like to have a "unsubscribe from all my > lists" button. And a "subscribe to all my lists" button. This might > be visually nicer, when having the two-button approach above. I wonder if your owners really want "subscribe all". "Unsubscribe all" does make sense for separations, of course, and they wouldn't necessarily be terminations. It would be useful in an internal transfer where "delete user" is not a solution. But in my experience specialized channels tend to proliferate but the same people are likely to be running them as run the department-wide lisst. > In our case we would want to (un-)subscribe the address in a "do > it, don't ask anyone" fashion, but maybe this is not a good idea in > general. What do you think? I think we would implement it similarly to the mass subscribe for multiple addresses case, where the list owner can decide how much bureaucracy to require of the subscriber. You'd want to be careful to make sure address verification is done at most once (for your use case, probably not at all). And there would be some things that could be done to arrange that most lists would have sensible defaults. > Yes, I agree, but policy here is to get rid of subdomains, and that > falls on our feet now. Well, once we figure out how to implement domain ownership, it wouldn't be hard to adapt that technology to "departments" that are administratively distinct but share mail and/or web domains. The main problem would be deciding whether and how to nest them. Superuser > domain owner > list owner > moderator is pretty obvious, but how "department owner" would fit in is less so.

2 1

mailman-web migrate fails with sqlite3.IntegrityError: UNIQUE constraint failed: account_emailaddress.email
by Stefan Bauer March 14, 2025

March 14, 2025

Dear Users, trying to update mailman3 to lastest version, we fail during mailman-web migrate with: Operations to perform: Apply all migrations: account, admin, auth, contenttypes, django_mailman3, django_q, hyperkitty, postorius, sessions, sites, socialaccount Running migrations: Applying account.0006_emailaddress_lower...Traceback (most recent call last): File "/opt/mailman/venv/lib/python3.10/site-packages/django/db/backends/utils.py", line 89, in _execute return self.cursor.execute(sql, params) File "/opt/mailman/venv/lib/python3.10/site-packages/django/db/backends/sqlite3/base.py", line 328, in execute return super().execute(query, params) sqlite3.IntegrityError: UNIQUE constraint failed: account_emailaddress.email We found a workaround to fake the migration with migrate --fake Operations to perform: Apply all migrations: account, admin, auth, contenttypes, django_mailman3, django_q, hyperkitty, postorius, sessions, sites, socialaccount Running migrations: Applying account.0006_emailaddress_lower... FAKED Applying account.0007_emailaddress_idx_email... FAKED Applying account.0008_emailaddress_unique_primary_email_fixup... FAKED Applying account.0009_emailaddress_unique_primary_email... FAKED Applying django_q.0015_alter_schedule_schedule_type... FAKED Applying django_q.0016_schedule_intended_date_kwarg... FAKED Applying django_q.0017_task_cluster_alter... FAKED Applying django_q.0018_task_success_index... FAKED Applying postorius.0019_alter_emailtemplate_data... FAKED And mailman 3 is still processing mails. I'm unsure if i should recover from snapshot or keep it going? Could this be some duplicate users with same mail-address? I have at least spotted one user and delete him. thank you. Stefan

2 3

Find a smtp server to send out emails
by Leon March 12, 2025

March 12, 2025

Hi, This problem is not caused by mailman, but I still want to give it a shot here. I'm hosting a mailing list on top of mailman3. Emails are supposed to be sent out by AWS ses. However, ses requires that sender address must be verified, which leads to a problem that emails sent by subscribers to mailing list cannot be sent to other subcirbers, since their addresses are not verified. And it is impossible to verified every subscriber. Are there smtp service providers allowing unverified email address to send out emails, or do I have other solutions? Thanks. -- Best wishes, Leon

4 3

Help! Duplicate DKIM key
by Jose Bernal March 11, 2025

March 11, 2025

Hi all, I'm having *sudden* issues with our SMTP server (Amazon SES) erroring out while trying to send from our most active Mailman3 mailing list (~1,000 subscribers; modest Mailman3 (v 3.3.3) installation (10+ lists, Ubuntu). Here is the message. We've got several thousand log entries like this now: *554 Transaction failed: Duplicate header 'DKIM-Signature'* Mar 10 08:31:10 mail1 postfix/smtp[217753]: 738B53F15E: to=< brian(a)brianmichaelslaw.com>, relay=xxx.org[44.225.xxx.xx]:587, delay=37, delays=2/35/0.16/0.13, dsn=5.0.0, status=bounced (host said: 554 Transaction failed: Duplicate header 'DKIM-Signature'. (in reply to end of DATA command)) As we don't do any DKIM key signing on the related Postfix machine I've opened up a case with Amazon. However, if there is a troubleshooting I should adopt on this issue with regard to Postfix/Mailman I'd like to know what your recommendations are, or what steps I can follow to better help the vendor ensure that this issue isn't coming from either the Postfix machine or the Mailman machine. Much thanks, --------------------- José Bernal Web/Application Engineer

2 2

Re: Postorius Suggestion: Give owner a view of all users of all owned lists
by Andreas Vetter March 11, 2025

March 11, 2025

[Forgot reply to list] ---------- Forwarded Message ---------- Thank you Stephen for your questions. I have to admit that I thought about a quick and dirty solution, but you are right, it would not be optimal. Lets see: Stephen J. Turnbull wrote: > Andreas Vetter writes: > > it would be real great if owners that own several lists, but are > > not superusers, can see all users of all *their* lists and manage > > them. A down-"selected" version of the superusers view. > > > > Would that be possible? > > Possible, yes. I don't know how to do it well enough to add to our > distribution. > > Note that owners can't actually manage users -- that really does need > to be a superuser. Owners can manage subscriptions to the lists they > own. Agreed, "manage subscriptions" is what owners would need. A list of all addresses subscribed to all lists owned by the logged in person. > So first we'd want to create a new "Subscriptions" item for the > top menu; the "Users" item isn't appropriate. I'm not sure who that > item should be visible to. Most likely only owners, because > individuals already have ways to see all their subscriptions, and it's > not obvious they would want the same presentation as your superowners. Owner is the primary target group for that. But since it should be a tool for managing subscriptions in a simple way, it might also be of interest for superusers. For me as a superuser it would make life easier. > Then you'd iterate over the logged-in owner's lists and collect all of > the subscriptions. I guess you'd want them to be organized by address > rather than by list. By User is out, I think -- owners can't normally > see Users, and I'm unhappy abou the privacy implications of being able > to correlate nole(a)alset.com with head(a)dodgy.gov in general, although I > realize it's not a problem in your setting. Ah, I see the problem and agree: So, the presentation should have a sorted and searchable list of addresses and a Button next to each address, maybe labeled "Subscriptions". > Without a more complete specification of what your users need, and the > presentation they'd want to see, I personally am unwilling to go > farther than those comments. Maybe one of the other devs feels > differently. The presentation given when above "Subscriptions" Button is clicked should contain the address as kind of Headline. Then a table of all lists of the logged in owner and next to each mailing list an indication, if the address is subscribed or not and a Button to toggle subscription/unsubscription. May be a single Toggle Button or (maybe better) two buttons, a suscribe and a unsubscribe button, where one is greyed out.b In our case Delivery Status and Delivery Mode are not interesting, but others might appreciate it. In addition my owners would like to have a "unsubscribe from all my lists" button. And a "subscribe to all my lists" button. This might be visually nicer, when having the two-button approach above. In our case we would want to (un-)subscribe the address in a "do it, don't ask anyone" fashion, but maybe this is not a good idea in general. What do you think? > Also, "domain owner" is way under-implemented currently. For the > hierarchical situation you outline, all the problems go away for > domain owners. Of course then you'd need to split out lists by > domain, but to me that's a small cost to preserve sanity in the > structure. Yes, I agree, but policy here is to get rid of subdomains, and that falls on our feet now. -- Mit freundlichen Gruessen, Andreas Vetter

1 0

How to process emails with Mailman3?
by Kyle Lahnakoski March 11, 2025

March 11, 2025

Good day! I am setting up an email list for my local community (just myself right now). Being a nerd, I am using Amazon SES to send and receive emails. I have mailman installed on ec2 (using "pip install mailman") and it is working well enough to send an email to the list with /opt/mailman/venv/bin/mailman inject -f <somefile>all(a)mymaillist.org SES is putting incoming mail into an S3 bucket, one file per email. Using a small python program, I use the above command to send them to the list. When I add a user (like myself) I get a welcome email from all-request(a)mymaillist.org. When I respond, the mail arrives in the S3 bucket, but I do not know how to give it to mailman3. The "inject" command will not work because there is no "all-request" mailing list. How do I feed these administrative mails to mailman3? Thank you. ----- I have tried netcat the email to the ?LMTP? port, but it fails: (venv) [ec2-user@ip-10-0-3-253 mailman]$ nc localhost 8024 < /tmp/pbTw1oqmV1rZtHXV707Jcov264hr 220 ip-10-0-3-253.ec2.internal GNU Mailman LMTP runner 2.0 500 Error: command "RECEIVED-SPF:" not recognized 500 Error: command "AUTHENTICATION-RESULTS:" not recognized 500 Error: command "" not recognized 500 Error: command "" not recognized 502 5.5.1 Too many unrecognized commands, goodbye. here is what the first few lines of an email file look like. (Some values have been changed) Received-SPF: pass (spfCheck: domain of lahnakoski.com designates 8.8.8.8 as permitted sender) client-ip=8.8.8.8;envelope-from=kyle(a)lahnakoski.com; helo=cichlid.ash.relay.mailchannels.net; Authentication-Results: amazonses.com; spf=pass (spfCheck: domain of lahnakoski.com designates 8.8.8.8 as permitted sender) client-ip=8.8.8.8;envelope-from=kyle(a)lahnakoski.com; helo=cichlid.ash.relay.mailchannels.net; dkim=failheader.i=(a)lahnakoski.com; dmarc=none header.from=lahnakoski.com; Return-Path:<kyle(a)lahnakoski.com> Received: from cichlid.ash.relay.mailchannels.net (cichlid.ash.relay.mailchannels.net [8.8.8.8]) by fips.wmjb.mail-manager-smtp.amazonaws.com with ESMTPS id p78l98r6nfp05h5lbb24phnsrovpcomu57smml81 (version=TLSv1.3 cipher=TLS_AES_256_GCM_SHA384) for<all-request(a)mymaillist.org>; Sun, 09 Mar 2025 15:13:30 +0000 (UTC) ...

3 7

Moderation of held emails vs. spam
by David Krantz March 11, 2025

March 11, 2025

Hi, I now run Mailman 3.3.1, installed from pip. Is there now any way to prevent Mailman from forwarding the contents of the held message when notifying moderators of held messages? In my case these messages often are spam messages and if the entire contents are forwarded it triggers spam handling in the recipient address(es) which over time risks classifying all moderation emails as spam or even classifying the list domain or server as a spam source. Even my own outgoing filter classifies it as spam, which I will fix. I currently run rspamd for spam filtering, graylisting and DKIM and ARC verification/signing. Someone on this recommended it, thank you for that as it removes the need for other milters. I guess that this would be a simple change to make as a kludge but a proper implementation as a setting would be a lot better. I'd like it as a global setting but that might be too coarse. Cheers // David

3 4

Postorius Suggestion: Give owner a view of all users of all owned lists
by Andreas Vetter March 10, 2025

March 10, 2025

Hi, it would be real great if owners that own several lists, but are not superusers, can see all users of all *their* lists and manage them. A down-"selected" version of the superusers view. Use case is an organisation (here are the superusers) with sub-organisations (here are the owners, e.g finance, research, production) having lists for the very sub-org itself and its sub-sub-orgs (e.g. research-all, research-solar, research-wind, research-battery). Would that be possible? -- Mit freundlichen Gruessen, Andreas Vetter

2 1

Bad Request 400 error with nginx/uwsgi install of venv
by zachr＠mta.ca March 10, 2025

March 10, 2025

Hello, and thanks in advance for any assistance. I followed the installation guide at: https://docs.mailman3.org/en/latest/install/virtualenv.html# I opted to use nginx and uwsgi. I can access mailman in the browser at https://SERVER_IP/mailman3 but when I try to use the hostname I get an nginx 400 bad request error. It seems like there is an issue with the nginx proxy. I used the example config and updated the required information: --------------------- server { listen 443 ssl default_server; listen [::]:443 ssl default_server; server_name HOSTNAME_OF_SERVER; location /static/ { alias /opt/mailman/web/static/; } location / { proxy_pass http://127.0.0.1:8000; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $remote_addr; } ssl_certificate /etc/pki/tls/certs/our_certificate.crt; ssl_certificate_key /etc/pki/tls/private/our_key.key; } --------------------- I thought maybe that because Im using uwsgi I should try the ngx_http_uwsgi_module and uwsgi_params in the nginx config, but that did not work, or I didnt use the correct syntax. Not sure what to try next!

2 2

Migration of the e-mail templates
by Markus Grandpré March 6, 2025

March 6, 2025

Dear list, When migrating the lists and archives from Mailman 2.1 to Mailman 3, the e-mail templates were obviously not migrated. Is there a way to make up for this? Kind regards, Markus Grandpré -- Markus Grandpré Universität Konstanz Kommunikations-, Informations-, Medienzentrum (KIM) Abteilung IT-Dienste Forschung, Lehre und Infrastruktur, Tel: ++49 7531 88 4342

3 3

Bug Report - REST API
by Peter Knowles March 6, 2025

March 6, 2025

OS: Debian 12 Mailman Core: 3.3.10 Install Method: venv When I apply the "count" and/or "page" param on: /3.1/lists/name.sub.domain.tld/requests This resulted in a "404 Not Found" error from the REST API. If I remove the params, the API returns results. From what I read in the docs, pagination should be possible on this type of endpoint as it returns "entries", "start" and "total_size". Tests against: /3.1/domains /3.1/lists Works fine with the "count" and "page" param as expected.

2 1

Hyperkitty Replies showing up as new posts
by Arte Chambers March 6, 2025

March 6, 2025

Hello, my Hyperkitty is creating a new post for each reply in a thread. I would expect that new posts to a list would show up in the archive and once you click on that thread you would see all replies. However in my Hyperkitty each reply to a thread shows up as its own post usually with the subject line saying RE: Original Message. How can I set up Hyperkitty to behave more like the lists.mailman3.org archives where replies to topics are filed under their respective threads? Thank you, Paul 'Arte Chambers' Robey 502-408-6922

3 4

Using clean_users.py
by Odhiambo Washington March 6, 2025

March 6, 2025

I have run clean_users.py with: DELETE_MAILMAN_USER = True DELETE_DJANGO_IF_MAILMAN = True However, when I go to https://mm3-site/mm/lists/listname.mm3-site/members/nonmember/ I still have hundreds of users listed despite the script having run and it showed hundreds of addresses removed. What might be the issue? I expect to NOT find anything listed as nonmembers. -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254 7 3200 0004/+254 7 2274 3223 In an Internet failure case, the #1 suspect is a constant: DNS. "Oh, the cruft.", egrep -v '^$|^.*#' ¯\_(ツ)_/¯ :-) [How to ask smart questions: http://www.catb.org/~esr/faqs/smart-questions.html]

2 1

Set member.moderation_action via REST API as part of message approval?
by Andy Matthews March 5, 2025

March 5, 2025

We're using Mailman 3.3.9. My team and I have written a simple UI for displaying and approving/rejecting held messages from non list members. When an email receives an "always accept" flag from the UI we call the API to pass in the requested information: ``` Form form = new Form(); form.param("action", "accept"); Entity<Form> data = Entity.entity(form, MediaType.APPLICATION_FORM_URLENCODED_TYPE); String safePath = UriBuilder.fromPath("lists/{listId}/held/{messageId}").build(listId, messageId).toString(); response = getTarget().path(safePath).request().post(data); ``` If that request is successful we update the `accept_these_nonmembers` property of the mailing list with the user's email. ``` Form form = new Form(); if (fieldValue.getClass().isArray()) { for (String val : (String[])fieldValue) { form.param(property, String.valueOf(val)); } } else { form.param(property, String.valueOf(fieldValue)); } Entity<Form> data = Entity.entity(form, MediaType.APPLICATION_FORM_URLENCODED_TYPE); response = getTarget().path("lists/" + listId + "/config").request().method("PATCH", data); ``` The result of these two API calls is that both the subscribers and nonmembers properties of the mailing list are updated to include the new email (let's call it abc(a)123.com) The user can immediately send another email which is not held for moderation. The issue comes when a different nonmember sends an email and is approved (let's call it xyz(a)789.com) For some reason this blows out the "always accept" status of user abc(a)123.com and requires their email to be approved again. After some research I believe this is because the `accept_these_nonmembers` property has been deprecated (which seems valid because that property remains an empty array). Additional reading seems to indicate that we can now set `moderation_action` on each individual user which supercedes the mailing list's `default_nonmember_action` property (in our case it is `Action.hold`). The docs indicate that I should be able to submit a patch request to update the moderation action for any user: https://docs.mailman3.org/projects/mailman/en/latest/src/mailman/rest/docs/… But it requires the user ID. And when trying to get the user_id for a nonmember it appears that it is not returned by the API. The following call: `/3.0/addresses/abc(a)123.com` returns ``` { "email": "abc(a)123.com", "original_email": "abc(a)123.com", "registered_on": "2025-03-03T19:18:35.169703", "self_link": "https://0.0.0.0:8001/3.0/addresses/abc@123.com", "http_etag": "\"92c44d0b3b323450f3576e6352acb59b4cc5d6f0a\"" } ``` So I'm not sure how I would be able to update this particular record without a member or user id. So, all that said, I'm looking for information on how to do one of the following. 1. When submitting a user's email to the `accept_these_nonmembers`, is there a way to indicate that the `member.moderation_action` should be a specific value? 2. Retrieve a nonmember record and have it include a member or user id that I can use to explicitly update the `member.moderation_action` value? There may of course be additional approaches that I'm not considering, but that's about the gist of it. Thoughts?

2 6

How to follow up to a question on a Mailing List
by Odhiambo Washington March 4, 2025

March 4, 2025

Hello listers, I always find some members' posts to MM3 lists breaking threads to an extent no one can easily figure out what portion of the discussion they were responding to. In a way, they end up creating a loosely-attached thread of their own. I have a suggestion for you that can help improve this. Please refer to http://www.lemis.com/questions.html#answer/ The guide was written decades ago by a very respectable member of the FOSS community for freebsd-questions ML, but it's a guide that is pretty standard for every ML. Thank you for your understanding and consideration of the advice. -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254 7 3200 0004/+254 7 2274 3223 In an Internet failure case, the #1 suspect is a constant: DNS. "Oh, the cruft.", egrep -v '^$|^.*#' ¯\_(ツ)_/¯ :-) [How to ask smart questions: http://www.catb.org/~esr/faqs/smart-questions.html]

1 0

Issues with a DMARC record leading to message being shunted
by Ralf Hildebrandt March 4, 2025

March 4, 2025

Hi! Recently a mail was not being distributed via our MM3 instance; I searched the logs and found: Dec 22 04:54:27 2023 (24) ACCEPT: <1d431542-b386-467b-8bf2-305f19ee7eb4(a)somenet.org> Dec 22 04:54:28 2023 (28) Uncaught runner exception: list index out of range Dec 22 04:54:28 2023 (28) Traceback (most recent call last): File "/usr/lib/python3.10/site-packages/mailman/core/runner.py", line 179, in _one_iteration self._process_one_file(msg, msgdata) File "/usr/lib/python3.10/site-packages/mailman/core/runner.py", line 272, in _process_one_file keepqueued = self._dispose(mlist, msg, msgdata) File "/usr/lib/python3.10/site-packages/mailman/runners/pipeline.py", line 37, in _dispose process(mlist, msg, msgdata, pipeline) File "/usr/lib/python3.10/site-packages/mailman/core/pipelines.py", line 53, in process handler.process(mlist, msg, msgdata) File "/usr/lib/python3.10/site-packages/mailman/handlers/validate_authenticity.py", line 125, in process authenticate(msg, msgdata) File "/usr/lib/python3.10/site-packages/mailman/utilities/retry.py", line 44, in f_retry return f(*args, **kwargs) File "/usr/lib/python3.10/site-packages/mailman/handlers/validate_authenticity.py", line 93, in authenticate auth_result = authenticate_message( File "/usr/lib/python3.10/site-packages/authheaders/__init__.py", line 395, in authenticate_message dmarc_result = check_dmarc(msg, spf_result, dkim_result, dnsfunc=dnsfunc, psddmarc=psddmarc) File "/usr/lib/python3.10/site-packages/authheaders/__init__.py", line 343, in check_dmarc result, result_comment, from_domain, policy = dmarc_per_from(from_domain, spf_result, dkim_result, dnsfunc, psddmarc) File "/usr/lib/python3.10/site-packages/authheaders/__init__.py", line 90, in dmarc_per_from record, orgdomain = receiver_record(from_domain) File "/usr/lib/python3.10/site-packages/authheaders/dmarc_lookup.py", line 117, in receiver_record retval = lookup_receiver_record(hostSansDmarc, dnsfunc) File "/usr/lib/python3.10/site-packages/authheaders/dmarc_lookup.py", line 92, in lookup_receiver_record tags = answer_to_dict(str(result)) File "/usr/lib/python3.10/site-packages/authheaders/dmarc_lookup.py", line 42, in answer_to_dict retval = {t[0].strip().lower(): t[1].strip().lower() for t in rawTags} File "/usr/lib/python3.10/site-packages/authheaders/dmarc_lookup.py", line 42, in <dictcomp> retval = {t[0].strip().lower(): t[1].strip().lower() for t in rawTags} IndexError: list index out of range Dec 22 04:54:28 2023 (28) SHUNTING: 1703220868.1418982+b27f5db154375fcd2c418d467172e4aad0d3d57a So the message has been shunted, due to this error. Something with DMARC and tags. So I checked the DMARC record for the sending domain somenet.org. It is "v=DMARC1;p=none;pct=100;rua=mailto:postmaster@somenet.org;mailto:postmaster@somenet.org;ri=3600;fo=1;" which is syntactically incorrect. The extra ";mailto:postmaster@somenet.org" is wrong, I guess the tag "ruf=" is missing here! It should probably read "v=DMARC1;p=none;pct=100;rua=mailto:postmaster@somenet.org;ruf=mailto:postmaster@somenet.org;ri=3600;fo=1;" So, should mm3 somehow "catch" this error somehow? According to the DMARC specs, an syntactically incorrect DMARC record should be ignored / handled as if none were present. -- Ralf Hildebrandt Charité - Universitätsmedizin Berlin Geschäftsbereich IT | Abteilung Netz | Netzwerk-Administration Invalidenstraße 120/121 | D-10115 Berlin Tel. +49 30 450 570 155 ralf.hildebrandt(a)charite.de https://www.charite.de

5 12

cannot import name 'parse_header' from 'django.http.multipartparser
by Stefan Bauer March 3, 2025

March 3, 2025

Dear Users, i recently tried to upgrade to latest MM3 and followed this[1] steps. However (venv) $ mailman-web migrate fails with: from rest_framework import mixins, views File "/opt/mailman/venv/lib/python3.10/site-packages/rest_framework/views.py", line 15, in <module> from rest_framework.request import Request File "/opt/mailman/venv/lib/python3.10/site-packages/rest_framework/request.py", line 17, in <module> from django.http.multipartparser import parse_header ImportError: cannot import name 'parse_header' from 'django.http.multipartparser' (/opt/mailman/venv/lib/python3.10/site-packages/django/http/multipartparser.py) (venv) mailman@edmmal03$ vi /opt/mailman/venv/lib/python3.10/site-packages/django/http/multipartparser.py Could this be a broken dependency? However I got no errors during (venv) $ pip install -U mailman postorius django-mailman3 hyperkitty mailman-web Log here[2] Any help is greatly appreciated. Thank you. [1] https://docs.mailman3.org/en/latest/upgrade-3.2.html [2] https://nopaste.boris.sh/#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

2 2

Archive download - unexpected end of file
by Mark March 2, 2025

March 2, 2025

Hi, I have a MM3 list to whose archive I recently added an mbox file of older emails. Viewing/searching the archive (Hyperkitty) is working fine. Downloading archives "for the month" or "last 30 days" delivers the expected ".mbox.gz" file and those are fine. However, when I download the "Entire archive" and attempt to gunzip that ".mbox.gz" file I get the error: " ... unexpected end of file". Or using Gnome desktop's "Extract", I get the error "..truncated gzip input" Any tips on resolving this would be gratefully received. Best, Mark

2 2

Hyperkitty django.request forbidden
by Arpad Horvath March 1, 2025

March 1, 2025

Hi, I moved from mailman to mailman3 in 2021. I hadn't have the time to fix the archiving. I can see the emails older then that in Hyperkitty, but none of the once still there is mailman3. What can be the problem? It's a Debian 12, I use the packages from the repo. In the mailman-web.log I can see this: [pid: 861|app: 0|req: 8277/8277] xxx.xxx.xxx.xxx () {40 vars in 636 bytes} [Wed Feb 26 06:47:31 2025] GET /hyperkitty/api/mailman/urls?mlist=korus%40lists.somewhere.xx = > generated 221 bytes in 33 msecs (HTTP/1.1 403) 7 headers in 211 bytes (1 switches on core 1) ERROR 2025-02-26 06:47:31,705 861 hyperkitty.views.mailman Access to the archiving API endpoint was forbidden from IP xxx.xxx.xxx.xxx, your MAILMAN_ARCHIVER_FROM setting may be misconfigured WARNING 2025-02-26 06:47:31,705 861 django.request Forbidden: /hyperkitty/api/mailman/urls WARNING 2025-02-26 06:47:31,705 861 django.request Forbidden: /hyperkitty/api/mailman/urls I have this line in /etc/mailman3/mailman-web.py MAILMAN_ARCHIVER_FROM = ('https://lists.somewhere.xx/hyperkitty', '::1') I have the Archiving settings: Archive policy is Private archives At Active archivers hyperkitty's checkbox is checked Archive rendering mode is Plain text I have these packages installed right now: ii mailman3 3.3.8-2~deb12u2 ii mailman3-full 3.3.8-2~deb12u2 ii mailman3-web 0+20200530-2.1 ii python3-django-mailman3 1.3.9-1 ii python3-mailman-hyperkitty 1.2.1-1 ii python3-mailmanclient 3.3.5-1 Thanks, Árpád

3 4

Postorius extremely slow on some of the mailinglists
by Eric Broens March 1, 2025

March 1, 2025

Hi, Postorius became extremely slow recently on some of our mailinglists, but not on all of them. Postorius even times out when opening some of them (https://<hostname>/postorius/lists/<mailing_list>.<domain>/) and shows the message "Mailman REST API not available. Please start Mailman core." This only happens when I am logged in (as administrator), but not when I am not logged in. It seems to be independent on the number of subscribers on the particular mailing list. Below you'll find an extract from the logs for a case where it timed out, and for a case where the page showed up after a long time. Mainly "GET /3.1/lists/<mailing_list>@<domain>/requests HTTP/1.1" takes a long time. There is nothing unusual going on regarding database queries, and mails are delivered normally. Any idea why this happens and how it can be solved? [05/Feb/2025:19:04:43 +0100] "GET /3.1/lists/<mailing_list>.<domain> HTTP/1.1" 200 378 "-" "GNU Mailman REST client v3.3.1" [05/Feb/2025:19:04:43 +0100] "GET /3.1/lists/<mailing_list>.<domain>/roster/owner HTTP/1.1" 200 2283 "-" "GNU Mailman REST client v3.3.1" [05/Feb/2025:19:04:43 +0100] "GET /3.1/lists/<mailing_list>.<domain>/roster/moderator HTTP/1.1" 200 90 "-" "GNU Mailman REST client v3.3.1" [05/Feb/2025:19:04:43 +0100] "GET /3.1/lists/<mailing_list>@<domain>/config HTTP/1.1" 200 3107 "-" "GNU Mailman REST client v3.3.1" [05/Feb/2025:19:04:43 +0100] "GET /3.1/lists/<mailing_list>.<domain>/archivers HTTP/1.1" 200 81 "-" "GNU Mailman REST client v3.3.1" [05/Feb/2025:19:04:43 +0100] "GET /3.1/lists/<mailing_list>.<domain>/archivers HTTP/1.1" 200 81 "-" "GNU Mailman REST client v3.3.1" [2025-02-05 19:05:14 +0100] [1612] [CRITICAL] WORKER TIMEOUT (pid:1653) [2025-02-05 19:05:14 +0100] [1653] [INFO] Worker exiting (pid: 1653) [2025-02-05 19:05:15 +0100] [64429] [INFO] Booting worker with pid: 64429 [07/Feb/2025:13:42:14 +0100] "POST /3.1/lists/find HTTP/1.1" 200 18226 "-" "GNU Mailman REST client v3.3.1" [07/Feb/2025:13:42:20 +0100] "GET /3.1/lists/<mailing_list>.<domain> HTTP/1.1" 200 414 "-" "GNU Mailman REST client v3.3.1" [07/Feb/2025:13:42:20 +0100] "GET /3.1/lists/<mailing_list>.<domain>/roster/owner HTTP/1.1" 200 2337 "-" "GNU Mailman REST client v3.3.1" [07/Feb/2025:13:42:20 +0100] "GET /3.1/lists/<mailing_list>.<domain>/roster/moderator HTTP/1.1" 200 90 "-" "GNU Mailman REST client v3.3.1" [07/Feb/2025:13:42:20 +0100] "GET /3.1/lists/<mailing_list>@<domain>/config HTTP/1.1" 200 3232 "-" "GNU Mailman REST client v3.3.1" [07/Feb/2025:13:42:20 +0100] "GET /3.1/lists/<mailing_list>.<domain>/archivers HTTP/1.1" 200 81 "-" "GNU Mailman REST client v3.3.1" [07/Feb/2025:13:42:20 +0100] "GET /3.1/lists/<mailing_list>.<domain>/archivers HTTP/1.1" 200 81 "-" "GNU Mailman REST client v3.3.1" [07/Feb/2025:13:42:46 +0100] "GET /3.1/lists/<mailing_list>@<domain>/requests HTTP/1.1" 200 520132 "-" "GNU Mailman REST client v3.3.1" [07/Feb/2025:13:42:46 +0100] "GET /3.1/lists/<mailing_list>.<domain>/member/<my.email>%40<mydomain> HTTP/1.1" 404 26 "-" "GNU Mailman REST client v3.3.1" [07/Feb/2025:13:43:15 +0100] "GET /3.1/lists/<mailing_list>@<domain>/requests HTTP/1.1" 200 520132 "-" "GNU Mailman REST client v3.3.1" [07/Feb/2025:13:43:15 +0100] "GET /3.1/lists/<mailing_list>@<domain>/held?count=50&page=1 HTTP/1.1" 200 90 "-" "GNU Mailman REST client v3.3.1" Thanks, Eric

2 3

Postfix + MariaDB + Mailman 3 Core
by Peter Knowles Feb. 28, 2025

Feb. 28, 2025

== ENVIRONMENT == OS: Debian 12 Mailman Core: 3.11.2 Install Mode: venv == QUESTION == I'd like to do a more advanced setup with regards to my MTA setup. *** I have mastered the art of setting up Mailman 3 Core to use MariaDB vs PostgreSQL *** What I'm after is the ability to make use of MariaDB with: transport_maps local_recipient_maps relay_domains In particular, with regards to Mailman 3 Core generated content. So instead of referencing a postmap generated file which MM3 presently generates, but have MM3 add and/or remove those records to/from a MariaDB table. Appreciate any insights on this task.

3 8

Saving settings of non-members does not work
by Torge Riedel Feb. 28, 2025

Feb. 28, 2025

Dears, I just experienced, that saving the settings of a list's non-member does not work with Postorius 1.3.13 I find this in mailman.log when saving the settings of a list's member, you see the PATCH there: [28/Feb/2025:12:55:24 +0100] "GET /3.1/lists/alle.lists.xxxxxxxxxxxxx.de HTTP/1.1" 200 428 "-" "GNU Mailman REST client v3.3.5" [28/Feb/2025:12:55:24 +0100] "POST /3.1/members/find?list_id=alle.lists.xxxxxxxxxxxxx.de&subscriber=1.vorsitz%40xxxxxxxxxxxxx.de HTTP/1.1" 200 633 "-" "GNU Mailman REST client v3.3.5" [28/Feb/2025:12:55:24 +0100] "GET /3.1/members/051e31c733a647e8b88fd6340a2e9e91/preferences HTTP/1.1" 200 156 "-" "GNU Mailman REST client v3.3.5" [28/Feb/2025:12:55:24 +0100] "PATCH /3.1/members/051e31c733a647e8b88fd6340a2e9e91/preferences HTTP/1.1" 204 0 "-" "GNU Mailman REST client v3.3.5" [28/Feb/2025:12:55:24 +0100] "GET /3.1/lists/alle.lists.xxxxxxxxxxxxx.de HTTP/1.1" 200 428 "-" "GNU Mailman REST client v3.3.5" [28/Feb/2025:12:55:24 +0100] "POST /3.1/members/find?list_id=alle.lists.xxxxxxxxxxxxx.de&subscriber=1.vorsitz%40xxxxxxxxxxxxx.de HTTP/1.1" 200 633 "-" "GNU Mailman REST client v3.3.5" [28/Feb/2025:12:55:24 +0100] "GET /3.1/lists/alle(a)lists.xxxxxxxxxxxxx.de/requests/count?token_owner=moderator HTTP/1.1" 200 73 "-" "GNU Mailman REST client v3.3.5" [28/Feb/2025:12:55:24 +0100] "GET /3.1/lists/alle(a)lists.xxxxxxxxxxxxx.de/held/count HTTP/1.1" 200 73 "-" "GNU Mailman REST client v3.3.5" [28/Feb/2025:12:55:24 +0100] "GET /3.1/members/051e31c733a647e8b88fd6340a2e9e91/preferences HTTP/1.1" 200 184 "-" "GNU Mailman REST client v3.3.5" When saving the settings of a list's non-member I find this in mailman.log, but the PATCH is missing: [28/Feb/2025:12:56:52 +0100] "GET /3.1/lists/alle.lists.xxxxxxxxxxxxx.de HTTP/1.1" 200 428 "-" "GNU Mailman REST client v3.3.5" [28/Feb/2025:12:56:52 +0100] "POST /3.1/members/find?list_id=alle.lists.xxxxxxxxxxxxx.de&subscriber=admin%40xxxxxxxxxxxxx.de HTTP/1.1" 200 1292 "-" "GNU Mailman REST client v3.3.5" [28/Feb/2025:12:56:52 +0100] "GET /3.1/members/dc13c0500496485abd7b95001f605aa9/preferences HTTP/1.1" 200 212 "-" "GNU Mailman REST client v3.3.5" [28/Feb/2025:12:56:52 +0100] "GET /3.1/lists/alle.lists.xxxxxxxxxxxxx.de HTTP/1.1" 200 428 "-" "GNU Mailman REST client v3.3.5" [28/Feb/2025:12:56:53 +0100] "POST /3.1/members/find?list_id=alle.lists.xxxxxxxxxxxxx.de&subscriber=admin%40xxxxxxxxxxxxx.de HTTP/1.1" 200 1292 "-" "GNU Mailman REST client v3.3.5" [28/Feb/2025:12:56:53 +0100] "GET /3.1/lists/alle(a)lists.xxxxxxxxxxxxx.de/requests/count?token_owner=moderator HTTP/1.1" 200 73 "-" "GNU Mailman REST client v3.3.5" [28/Feb/2025:12:56:53 +0100] "GET /3.1/lists/alle(a)lists.xxxxxxxxxxxxx.de/held/count HTTP/1.1" 200 73 "-" "GNU Mailman REST client v3.3.5" [28/Feb/2025:12:56:53 +0100] "GET /3.1/members/dc13c0500496485abd7b95001f605aa9/preferences HTTP/1.1" 200 212 "-" "GNU Mailman REST client v3.3.5" Where can I search deeper to find the cause of the issue? Kind regards Torge

2 1

Postorius custom web forms?
by Johannes Rohr Feb. 28, 2025

Feb. 28, 2025

Dear all, I am trying to understand how to replace a web template used by postorius by a custom version. I need to replace /accounts/signup by a version with a captcha (using django-simple-captcha) because my instance is being overrun by spambots. Can anyone point me to the correct instructions? I've tried to get instructions for chatgpt and co, but that's totally hopeless. Most of what they say is made up and doesn't work.. Cheers, thanks so much in advance, Johannes

3 2

Error: ConnectionRefusedError at /accounts/login/
by Kim Sunggun Feb. 28, 2025

Feb. 28, 2025

Hello, When I sign in new id, it has an issue. Could you please guide me to fix it? error: ConnectionRefusedError at /accounts/login/ [Errno 111] Connection refused Request Method: POST Request URL: https://lists.klnpa.org/accounts/login/ Django Version: 4.2.19 Exception Type: ConnectionRefusedError Exception Value: [Errno 111] Connection refused Exception Location: /usr/lib64/python3.9/socket.py, line 844, in create_connection Raised during: allauth.account.views.LoginView Python Executable: /opt/mailman/venv/bin/uwsgi Python Version: 3.9.21 Python Path: ['.', '', '/etc/mailman3', '/usr/lib64/python39.zip', '/usr/lib64/python3.9', '/usr/lib64/python3.9/lib-dynload', '/opt/mailman/venv/lib64/python3.9/site-packages', '/opt/mailman/venv/lib/python3.9/site-packages']

3 7

Easy way to integrate captcha/reduce subscription spam?
by Johannes Rohr Feb. 25, 2025

Feb. 25, 2025

Dear all, my mailman3 instance is flooded with subscription spam, yet I haven't found any canonical method of integrating a captcha in to the subscription form. Is there really none at all? Perplexity.ai says I should install the python package django-simple-captcha but is unclear about the steps needed to actually make the captcha appear. Are there other ways? Is there any method that is robust and survives upgrades? Also, would there be a way of batch-deleting all those thousands of spam registrations that have accumulated (what they have in common is that their email is unconfirmed) Thanks in advance for any suggestion! Johannes

2 3

Hi, Does the mailman community have any tips on accepting cookies?
by TomNewChao Feb. 25, 2025

Feb. 25, 2025

Hi, I want add the tips about accepting cookies in mailman-web that include the postorius(https://gitlab.com/mailman/postorius) and kyperkitty (https://gitlab.com/mailman/hyperkitty) eg: Can the mailing list community support tips for accepting cookies? Thank you very much ___________________________________________ Mailman's content filtering has removed the following MIME parts from this message. Content-Type: image/png Name: image.png Replaced multipart/alternative part with first alternative.

1 0

How To Install Mailman 3 on Debian 10 (Complete Guide)
by Brian Carpenter Feb. 25, 2025

Feb. 25, 2025

I have finished my how-to install Mailman 3 on Debian 10 completed to the point where you can use it to get a fully functional Mailman 3 environment up and running. This is a comprehensive guide that walks you through installing EVERYTHING (currently!) that Mailman 3 needs to run. It also makes updating Mailman 3/Postorius/Hyperkitty very easy. I have not added the update directions yet but will very soon. I also plan on adding a section on setting up DKIM and Xapian with Mailman 3. I hope this helps those who wish to get a Mailman 3 server up and running quickly and brings a sense of sanity to the confusion regarding the various documentation out there concerning the installation of Mailman 3/Postorius/Hyperkitty. I intend to add a How-to for Ubuntu 20 at some point. Without further ado: https://wiki.list.org/DOC/Howto_Install_Mailman3_On_Debian10 I am sure the above guide can use improvements. Feel free to contact me off-list to point out mistakes/improvements, etc. -- Brian Carpenter Harmonylists.com Emwd.com

13 38

Speed up importing mailman2 lists
by t.maintz＠fz-juelich.de Feb. 24, 2025

Feb. 24, 2025

We are currently planning to migrate from mailman2 to mailman3 as a container, have around 1500 lists and would like to complete the migration ideally in a few hours. We would like to switch off mailman2 to have a defined state of the lists and import them to mailman3. The import of all lists via script takes about 3 days. Parallelizing the imports does not work due to lockings in the database. However, we cannot accept a downtime of 3 days. Does anyone have tips on how we can speed up the procedure or are there best practices for larger environments? Thanks and best regards, Thomas

4 8

clean up spambot generated accounts
by Johannes Rohr Feb. 23, 2025

Feb. 23, 2025

Dear all, I'm trying to find a way to clean up hundreds of spambot generated accounts on my system. I was pointed to this script that should be capable of doing the task: https://www.msapiro.net/scripts/clean_users.py However, it seems outdated. First, the path to the interpreter is not what I find on my mailman3 installation. It says: #! /opt/mailman/mm/venv/bin/python However, the python command is located in /opt/mailman/venv/bin/python instead, no "mm" After fixing this, the script still throws an error: (venv) mailman@ida:~$ clean_users.py Traceback (most recent call last): File "/usr/local/bin/clean_users.py", line 55, in <module> django.setup() File "/opt/mailman/venv/lib/python3.10/site-packages/django/__init__.py", line 19, in setup configure_logging(settings.LOGGING_CONFIG, settings.LOGGING) File "/opt/mailman/venv/lib/python3.10/site-packages/django/conf/__init__.py", line 102, in __getattr__ self._setup(name) File "/opt/mailman/venv/lib/python3.10/site-packages/django/conf/__init__.py", line 89, in _setup self._wrapped = Settings(settings_module) File "/opt/mailman/venv/lib/python3.10/site-packages/django/conf/__init__.py", line 217, in __init__ mod = importlib.import_module(self.SETTINGS_MODULE) File "/usr/lib/python3.10/importlib/__init__.py", line 126, in import_module return _bootstrap._gcd_import(name[level:], package, level) File "<frozen importlib._bootstrap>", line 1050, in _gcd_import File "<frozen importlib._bootstrap>", line 1027, in _find_and_load File "<frozen importlib._bootstrap>", line 1004, in _find_and_load_unlocked ModuleNotFoundError: No module named 'settings' Can somebody explain to me, why this module is not found and what I can do to fix it, if anything? Thanks a lot in advance! Johannes

2 2

Enforcing SSO and subscription options
by dlb-ml＠anl.gov Feb. 21, 2025

Feb. 21, 2025

Contrary to the messages I found in the archive, rather trying to delete or remove the social login portion of the sign in page, I'm looking to see if there's any way to isolate the third-party login section and prevent local account sign in and sign up. This way, we can ensure that the people within our organization are using a stronger auth method that prioritizes MFA, rather than just username/password. To do this, our plan is to block signups using "ACCOUNT_ADAPTER = 'django_mailman3.views.user_adapter.DisableSignupAdapter'" and to remove the portions of the login template such that the username/password/forgot password fields are removed, leaving just the button to our SSO instance. I'm anticipating that this should be sufficient to block username/password sign ins, and is resistant to page manipulation due to CSRF tokens, but I wanted to ask to see if there was a better way, like an official configuration (which I have not found yet). I did see that there is the SOCALACCOUNT_ONLY option, as provided by allauth (https://docs.allauth.org/en/latest/socialaccount/configuration.html) but that broke any attempt to display the sign in page, and I'm assuming is not supported with the current version of MM3. Is my plan to modify the templates viable? Additionally, because external users would not have access to their own dashboards within the web UI, and since we are planning on disabling anonymous subscriptions with "SHOW_ANONYMOUS_SUBSCRIBE_FORM=False", the only two viable ways to subscribe to a list for them would be: 1) Send a request directly to the list owner or a superadmin to subscribe/unsubscribe the address 2) Allow email commands to subcribe/unsubscribe users (i.e. $LISTNAME-join@$DOMAIN) Given the discussions on disabling the anonymous subscription form, are the email commands a less spam-susceptible solution or are they just as vulnerable as the form? Thanks

2 3

Hyperkitty performance problem
by Tobias Diekershoff Feb. 20, 2025

Feb. 20, 2025

Hey all, last week we caught some AI bots causing high LOAD on our mailman3 servers archive, that we blocked with nginx rules. I'm not sure if it is related to this incident, but we noticed this when analyzing the log files at the time. In the mailman.log hyperkitty is listed 10k times and more to archive a single mail over the time of 2h, seemingly all with the same process ID > (1186) HyperKitty archived message [...] The mailman3-web.log has matching log entries that the mail was archived > hyperkitty.views.mailman Archived message every 0.5 seconds. In the web interface to the archive, the mail is only listed once though. My suspicion is, that these archiving processes are now overloading the system, preventing a timely catching up work of the queued messages. I could not find anything in the Mailman3 nor Hyperkitty documentation to better distribute the system resources to the Mailman runner or prevent Hyperkitty to restart archiving a mail over and over again. Any hint about where to look for the reason of this is highly appreciated. Best, Tobias -- Tobias Diekershoff >>> System Hacker Free Software Foundation Europe Schönhauser Allee 6/7, 10119 Berlin, Germany | t +49-30-27595290 Registered at Amtsgericht Hamburg, VR 17030 | fsfe.org/support OpenPGP-Key ID ... 0x25FE376FF17694A1 Fingerprint ...... 23EE F484 FDF8 291C BA09 A406 25FE 376F F176 94A1

6 16

Mailman Core: REST API: Member Subscription Invitation
by Peter Knowles Feb. 20, 2025

Feb. 20, 2025

Product: Mailman Core Version: 3.3.10 When I post an "invite" to the REST API: http://localhost:8001/3.1/members Params: list_id = list.domain.tld subscriber = some(a)email.address display_name = Some Name invitation = true Should Mailman Core be attempting to send an "invitation" email to the "subscriber" address, or is this the job of the "client" calling the API? I understand the API does return "token", and "token_owner" on success, which I assume the "token" would be used for a subsequent "verification" process. I'm developing my own "frontend" for "subscribers", "moderators", "list admins", and "system admins" respectively. Sort of working through understanding what Core does and does not do itself.

2 3

REST API: potential bug
by Peter Knowles Feb. 16, 2025

Feb. 16, 2025

I'm starting to develop against the REST API and found what might be a bug in the validation process. Sending a POST request with an "empty" payload returns 201 (created): http://localhost:8001/3.1/domains Since "mail_host" should be required at minimum to create a domain, this seems like there may be a bug with the REST API. The workaround for the moment is to add validation at the application layer, but the API should really be returning a 4xx code and error respectively.

2 5

install v3.3.11
by Jose Bernal Feb. 14, 2025

Feb. 14, 2025

I'd like to install Mailman v3.3.11. Are there instructions for installing from pip? If not, is there an alternate way to install this latest version? When executing: pip install mailman==3.3.11 I get: ERROR: No matching distribution found for mailman==3.3.11 Thank you,

2 2

Re: Moderation action "None" is misleading
by Stephen J. Turnbull Feb. 13, 2025

Feb. 13, 2025

Adding mailman-users(a)mailman3.org. Technical suggestions should go to distro channels or to Mailman's issue tracker: https://gitlab.com/mailman/mailman/-/issues/1176. Further discussion of technical details is best done there. Thomas Krichel writes: > Stephen J. Turnbull writes > > Debian has traditionally been quite slow to update Mailman, > > And now it has the addition issue that Debian testing python > standard it 3.13, so the nntplib is no longer supported. > Thus the current Mailman debian testing appears broken. That's Debian's problem, as we currently don't support Python 3.13, although of course we intend to. This is the only issue that came up in a quick search of Mailman's issue tracker for Python 3.13 (but I did not check the other subprojects such as Postorius). I conclude that not a lot of work has been done on supporting Python 3.13 (rather than the optimistic "there's nothing to be done"). From Mailman's point of view, users have two excellent options for the forseeable future: (1) don't gateway list <-> newsgroups (2) install Mailman into a Python 3.9--3.12 virtual environment. I'm sympathetic to the needs of the Debian developers, and at this point for 99% of software it's perfectly reasonable to aim to use 3.13 in the next Debian release. Unfortunately for Mailman users on Debian hosts that's not high on our list of priorities since we recommend a virtual environment installation in any case. At present there seem to be three ways forward for Debian packaging: 1. Remove NNTP support. (In honor of larsi, I'd rather not.) 2. Add nntplib.py from the Python 3.12 nntplib, as a stopgap until option 3 can be implemented. I can't speak for other developers but we might be willing to add it as a contrib module, especially if that might make life easier for distro packagers. It's suboptimal though since that absolutely has to be considered techical debt that will need to be paid someday. 3. Port Mailman to pynntp (that may need to be Debian packaged, too), which has seen a revival of activity and two feature releases since 2023. My inclination as a Mailman core developer is not to participate actively in development of NNTP support in Mailman for Python 3.13+ unless we see an outpouring of support from site admins. However, I would be happy to answer questions and work on Mailman-side issues that are blocking or inconvenient for the NNTP work. Mark and Abhilash would undoubtedly contribute as well, on a time-available basis. > I certainly would love to build an alternative Mailman Debian > package that would be more up-to-date, but I don't want > to do it on my own. Debian and Python are compatible free software; just take the existing package metadata, in a recent Mailman (presumably the most recent release) drop in the most recent nntplib, and change all the import statements. mailman/src/mailman/mta/nntplib.py seems like a plausible location. IWBNI you could keep all Mailmanisms out of nntplib (because of the GPL) so any bugfixes or improvements could be available to the Python community. I think you could probably be up and running VERY quickly with that approach. Of course it wouldn't just slot into the next iteration of Debian because they have stringent QA (or maybe that could go into unstable?). I'm pretty sure it would be useful right away to a whole lot of people who are willing to use a PPA. Regards, Steve

6 13

Login confusion
by Markus Grandpré Feb. 13, 2025

Feb. 13, 2025

Dear list, We've encountered an issue with Postorius after migrating from Mailman 2.1. It appears that Postorius is treating email addresses with differing capitalization as distinct user accounts. For example, <markus.grandpre(a)uni-konstanz.de> and <Markus.Grandpre(a)uni-konstanz.de> are being recognized as separate identities. This is causing significant confusion. Users registered with one capitalization pattern are not seeing the list subscriptions and settings that were previously associated with their account (imported from Mailman v2.1) which used a different capitalization. Is there a known configuration option or method within Postorius (or Mailman 3 itself) to normalize or unify account identification, effectively treating email addresses as case-insensitive for account matching? We need a solution that ensures users see their correct list memberships regardless of the capitalization they use when logging in or that was used during the original Mailman 2.1 import. Thank you in advance Markus -- Markus Ludwig Grandpré Universität Konstanz Kommunikations-, Informations-, Medienzentrum (KIM) Abteilung IT-Dienste Forschung und Lehre, B803, Tel: ++49 7531 88 4342

8 16

Heads up: settings.ACCOUNT_AUTHENTICATION_METHOD is deprecated
by Andreas Vetter Feb. 11, 2025

Feb. 11, 2025

Hello, I have a venv installation of: mailman postorius django-mailman3 hyperkitty mailman-web I just did a pip install -U --upgrade-strategy eager When running mailman-web runjobs -l I get the following Warning: System check identified some issues: WARNINGS: ?: settings.ACCOUNT_AUTHENTICATION_METHOD is deprecated, use: settings.ACCOUNT_LOGIN_METHODS = {'email', 'username'} I guess this is from allauth (version django-allauth-65.4.1). Changing ACCOUNT_AUTHENTICATION_METHOD to ACCOUNT_LOGIN_METHODS in /etc/mailman3/settings.py is not enough. One has to edit venv/lib/python3.11/site-packages/mailman_web/settings/mailman.py -- Mit freundlichen Gruessen, Andreas Vetter

2 5

Pck files stuck in out queue
by Lieuallen, Thomas Otis Feb. 10, 2025

Feb. 10, 2025

Running Mailman 3.3.10 I have 11x pck files stuck in my out queue. There tends to always be a .bak file as well. If I run ‘ls -l’, the files are continually updated and rotated through, just as fast as I can look. The out runner is consuming copious CPU time. I was hoping this would help: [logging.runner] level: DEBUG But, if so, I don’t see the logs anywhere. I believe they’re all for one list. When I use ‘strings’ on one to get a hint of what’s inside, I see the list members at the bottom (recipients). One of them consistently has ‘!’ before their email address. Not sure if that’s a clue. Just no other reason to suspect that, though. Ideas on where/how to track down the status of these files and fix whatever’s broken? Thank you Tom Lieuallen Oregon State University

3 14

How to limit numbers of outgoing emails per connection
by Alain D D Williams Feb. 10, 2025

Feb. 10, 2025

Exim tells me "no immediate delivery: more than 30 messages received in one connection" The emails then sit in the exim queue until a queue runner kicks in - which happens once every 30 minutes. The result is considerable delays which makes list email conversations bouncy. Question: how do I tell MM3 to send no more than 30 emails in one connection to exim (via SMTP to localhost port 25) ? If that is not possible, how do I find the number that MM3 batches outgoing emails so that I can configure exim to match (as I did with MM2) ? I see documentation pages like the following. They are useless to me, incomprehensible without a lot of learning. I program in several languages but only a little Python. What I am looking for is a setting in a config file. https://docs.mailman3.org/projects/mailman/en/latest/src/mailman/runners/do… -- Alain Williams Linux/GNU Consultant - Mail systems, Web sites, Networking, Programmer, IT Lecturer. +44 (0) 787 668 0256 https://www.phcomp.co.uk/ Parliament Hill Computers. Registration Information: https://www.phcomp.co.uk/Contact.html #include <std_disclaimer.h>

3 2

Filter question
by Chris Feb. 9, 2025

Feb. 9, 2025

List has "filter content" set. Filter Mime-Type [] Filter Extensions exe bat cmd com pif scr vbs cpl Accept Mime Media Types multipart message/rfc822 text/plain text/html application/pdf application/nappdf application/x-pdf application/rtf application/vnd.oasis.opendocument.spreadsheet application/vnd.openxmlformats-officedocument.spreadsheetml.sheet application/vnd.ms-excel application/vnd.oasis.opendocument.text application/vnd.openxmlformats-officedocument.wordprocessingml.document application/msword Allow Extensions .zip .7z Reduce Alternative No Convert to Plain-Text No Now I'm sending an Message from outlook (html) with Inline Images. Content Filter off: Works fine Conent Filter On,: All except the image ist fine. The image gets lost and only a placeholder is shown <img data-cid="image001.png(a)01D65210.566F56E0" height="51" id="Grafik_x0020_1" src="../../attachment/view/tmai1738975737149948386/aW1hZ2UwMDEucG5nQDAxRDY1MjEwLjU2NkY1NkUw;jsessionid=03FDBB0F16AFB10F7439822AB2C59450-n4.bap20a" style="width: 3.3437in;height: 0.5312in;" width="321"> Even if MimeTypes filter is [] signature (p7s) gets filtered. Any hint? TIA Chris

2 4

User with abo to list can not set to another moderation flag
by Chris Feb. 8, 2025

Feb. 8, 2025

Hi again, I've one weird problem. I've some lists and a user which is a moderator on both lists. Steps to reproduce Postorius -> Users -> search for the user to change -> manage Both Lists are shown Moderarion Flag on a newer List was changed from standard to accept -> On the older list I've tried from Standard to Accept -> click on the button to accept changes result in reverting to "standard" (the setting which I want to change). Any hints on that? (can't find any difference between those lists except name und descriptions. )

2 3

How to add new Domain?
by c.benner＠apd-it.eu Feb. 7, 2025

Feb. 7, 2025

Hello, i'm really new to mailman3 and I've been using mm2.1 couple of years. It's really hardto understand documentation. But I'll do one in german language next time. I've got it installed ob Debian12 and it's working now. It takes a little more time to understand all settings and also the difference between postorius and django and what is when used for. But what I do not understand 'til now is how to add a new domain. My running config has one domain (e.g.) testdomain1.org and everything is working fine. The Domain has a virtualhost which listens on *:443 (with LE cert) Postfix works like a charm. The interface of the machine is bound to one IP Address public but for example here written as: 192.168.200.15 Id like to add a new Domain. My first step would be to add another IP Address to the interface: (e.g.) 192.168.200.16 Then I'll change the virtual host settings in apache conf from first domain which is actually listeing to *:443 to 192.168.200.15:443 And add a second site with 192.168.200.16:443 So the "physical" part is done Is that right 'til now? After that I'll go to the admin page xxxx/mailman3/admin which brings django admin page up. On that page I'll add "websites" and add testdomain2.net Last step is adding "mail domain" site: testdomain2.net mail domain: testdomain2.net After that I can add lists to that domain and mails to any list @testdomain2,net should be routed right? Maybe I'm to old (56yrs) but I've read a lot of documentation and everything was clear and understandable. It was never a question of linux or windows OS but on who'S writing the doc. I can't find any doc about the web part? What about Users having no acces to the shell but the Web-Frontend? Some pictures and a "How to" and "what if" would be great! But it's alos possible that I'm not finding it and it's somewhere out there. Thanks in advance.

3 5

Error while mass operation, no progress display while mass operation is running
by Markus Grandpré Feb. 7, 2025

Feb. 7, 2025

Dear List, At the University of Konstanz we have mailing list administrators who frequently add and remove up to 10000 (and sometimes more) list members. I have therefore tested the “Mass subscription” and “Mass removal” operations and found that both the “Remove ALL members” operation and the “Mass subscription” operation report an internal server error on the website, but continue to run in the background until all new members have been successfully added or deleted. Unfortunately, I have not found any error message in the log files. I also tested that mass operations “Remove listed users” and “Remove Selected” ran successfully and without any errors. Regardless of whether a mass operation process runs without errors or continues to run despite an error, I find it hard that Postorius does not display the progress of such a mass operation in order to monitor the process, as mass operations with more than 1000 members are very time-consuming. Perhaps this could be changed in a future version of Postorius? Best Markus -- Markus Grandpré Universität Konstanz Kommunikations-, Informations-, Medienzentrum (KIM) Abteilung IT-Dienste Forschung, Lehre und Infrastruktur, Tel: ++49 7531 88 4342

3 2

Which folder should I share between pods with kubernetees persistentVolumeClaim ?
by antoine.depoisier＠ikmail.com Feb. 7, 2025

Feb. 7, 2025

I use mailman with kubernetees, and I have four pods. I currently use persistentVolumeClaim for two folders in the mailman configuration "cache" and "messages". I share these folders, as mailman needs to be consistent for these two folders, but I'm wondering if I should share other folders as well, like locks and such. There are all the folders in mailman archives cache data etc lists locks logs master.pid messages queue templates I ask this question because I often have a problem when creating a mailing list. I think I have a problem with the locks, but I'm not sure if the problem is due to the fact that the locks folder is not shared. If you want more details, here's the trace I sometimes get, when someone tries to create a mailing list: File "falcon/app.py", line 365, in falcon.app.App.__call__ File "/usr/lib/python3.12/site-packages/mailman/rest/lists.py", line 322, in on_post mlist = create_list(**validator(request)) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/mailman/app/lifecycle.py", line 102, in create_list call_name(config.mta.incoming).create(mlist) File "/usr/lib/python3.12/site-packages/mailman/mta/postfix.py", line 96, in create self.regenerate() File "/usr/lib/python3.12/site-packages/mailman/mta/postfix.py", line 106, in regenerate with Lock(lock_file): ^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/site-packages/flufl/lock/_lockfile.py", line 467, in __exit__ self.unlock() File "/usr/lib/python3.12/site-packages/flufl/lock/_lockfile.py", line 417, in unlock raise NotLockedError('Already unlocked') flufl.lock._lockfile.NotLockedError: Already unlocked When I check the lock folder, I have these two files, and I'm wondering if I should delete these two files : -rw-rw---- 2 mailman nogroup 97 Feb 6 2025 master.lck -rw-rw---- 2 mailman nogroup 97 Feb 6 2025 master.lck|mailman-core-deployment-5f59557b66-bkkf4|16|4268829230172994873 Do you have any answer for me ?

3 4

Configuring ARC with multiple domains in Mailman3
by Lance A. Brown Feb. 6, 2025

Feb. 6, 2025

I'm working on setting up MailMan 3 on an Ubuntu 24.04 LTS server. I've got everything running and working with docker-mailman. Now I'm looking at configuring ARC and am a bit lost. How is ARC configured in a mailman3 with multiple domains? Do I set it up to use the hostname of the server Mailman is running on? Thanks for any assistance, --[Lance]

2 4

One-click unsubscribe?
by Jered Floyd Feb. 5, 2025

Feb. 5, 2025

I'm having a lot of problems with GMail delivery due to lack of "one-click unsubscribe" -- however that is quantified, which is not clear. In particular, there is an issue with the fact that Google ignores dots in email addresses. So I have many (MANY!) subscribers who try to use the List-Unsubscribe header target, but because they are subscribed as "idiotsubscriber(a)gmail.com" rather than "idiot.subscriber(a)gmail.com" (which they have since changed their sender to) they get a reject that they are not subscribed. These people are also far too unobservant to read the footer of every message that reads "You are subscribed as idiotsubscriber(a)gmail.com". Is there any way to provide personalized List-Unsubscribe header links, or have Mailman ignore dots in gmail.com addresses... or... anything? I'm finding reported spam percentages in the Google Postmaster Dashboard exceeding 0.1%, which causes massive delivery blocking to GMail-based subscribers. While I would gladly ban everyone who uses gmail, that sadly accounts for about half of the Internet today and would be incredibly unproductive. Thanks, --Jered

3 3

Moderation action "None" is misleading
by Markus Grandpré Feb. 5, 2025

Feb. 5, 2025

Dear List, I find the use of the term 'None' (or 'Kein' in the German translation; see attachments) in the 'Moderation action' column of the member list misleading, as the term suggests that no moderation action is applied to the respective member. However, this is not necessarily the case. If you check a member’s "Administration options / Moderation" setting, a moderation action, such as "Moderation" or "List default", may be in effect. I suggest that the 'Moderation action' column should display the currently set value of the 'Administration options / Moderation' setting for each member. Since some of our mailing lists frequently add and remove thousands of members, manually adjusting this setting for each member would not be practical. Best regards, Markus Grandpré -- Markus Ludwig Grandpré Universität Konstanz Kommunikations-, Informations-, Medienzentrum (KIM) Abteilung IT-Dienste Forschung und Lehre, B803, Tel: ++49 7531 88 4342 ___________________________________________ Mailman's content filtering has removed the following MIME parts from this message. Content-Type: image/png Name: mm3_memberlist_de.png Content-Type: image/png Name: mm3_memberlist_en.png

3 4

Mailman shutting down Hyperkitty: Request too large
by Arte Chambers Feb. 2, 2025

Feb. 2, 2025

Hello I need help troubleshooting a problem with MM. The service is stopping and throwing this error in the mailman log "Exception in the HyperKitty archiver: 413 Request Entity Too Large" I'm not sure what my next steps should be to troubleshoot this issue. System CTL has this message and i'm not sure if it's relevant to the issue. ``` >sudo systemctl status mailman3.service systemd[1]: mailman3.service: Can't open PID file /opt/mailman/mm/var/master.pid (yet?) after start: No such file or directory ``` The MM Service will run for a while then shuts down. /mailman.log ``` Jan 30 05:22:20 2025 (1547) HyperKitty failure on https://list.louisvillecommunitygrocery.com/archives/api/mailman/archive: <html> <head><title>413 Request Entity Too Large</title></head> <body> <center><h1>413 Request Entity Too Large</h1></center> <hr><center>nginx/1.24.0 (Ubuntu)</center> </body> </html> (413) Jan 30 05:22:20 2025 (1547) Could not archive the message with id < CAPesOD3EWaFzfVZAbUzFm3Vk3Xnqcf9KodVic6agaT27Kmhy0w(a)mail.gmail.com> Jan 30 05:22:20 2025 (1547) archiving failed, re-queuing (mailing-list lcg-board-private.list.louisvillecommunitygrocery.com, message < CAPesOD3EWaFzfVZAbUzFm3Vk3Xnqcf9KodVic6agaT27Kmhy0w(a)mail.gmail.com>) Jan 30 05:22:20 2025 (1547) Exception in the HyperKitty archiver: <html> <head><title>413 Request Entity Too Large</title></head> <body> <center><h1>413 Request Entity Too Large</h1></center> <hr><center>nginx/1.24.0 (Ubuntu)</center> </body> </html> Jan 30 05:22:20 2025 (1547) Traceback (most recent call last): File "/opt/mailman/venv/lib/python3.12/site-packages/mailman_hyperkitty/__init__.py", line 158, in _archive_message url = self._send_message(mlist, msg) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/mailman_hyperkitty/__init__.py", line 228, in _send_message raise ValueError(result.text) ValueError: <html> <head><title>413 Request Entity Too Large</title></head> <body> <center><h1>413 Request Entity Too Large</h1></center> <hr><center>nginx/1.24.0 (Ubuntu)</center> </body> </html> Jan 30 05:22:21 2025 (1547) HyperKitty archived message <CAPesOD25frujqYsAXU3kk8MUOY=h3ZV4cgzUXSi9L0c3K2W0NQ(a)mail.gmail.com> to https://list.louisvillecommunitygrocery.com/archives/list/testing@list.loui… [30/Jan/2025:05:22:43 +0000] "GET /3.1/users/lcgcoop(a)gmail.com HTTP/1.1" 200 428 "-" "GNU Mailman REST client v3.3.5" [30/Jan/2025:05:22:43 +0000] "GET /3.1/users/a6af988d603c49c9ac61a3a41562d132/addresses HTTP/1.1" 200 927 "-" "GNU Mailman REST client v3.3.5" [30/Jan/2025:05:22:43 +0000] "POST /3.1/members/find HTTP/1.1" 200 3407 "-" "GNU Mailman REST client v3.3.5" [30/Jan/2025:05:22:43 +0000] "POST /3.1/members/find HTTP/1.1" 200 4705 "-" "GNU Mailman REST client v3.3.5" [30/Jan/2025:05:22:43 +0000] "GET /3.1/addresses/lcgcoop(a)gmail.com HTTP/1.1" 200 401 "-" "GNU Mailman REST client v3.3.5" [30/Jan/2025:05:22:43 +0000] "GET /3.1/lists/ testing(a)list.louisvillecommunitygrocery.com HTTP/1.1" 200 482 "-" "GNU Mailman REST client v3.3.5" [30/Jan/2025:05:22:43 +0000] "GET /3.1/lists/ testing.list.louisvillecommunitygrocery.com/roster/owner HTTP/1.1" 200 763 "-" "GNU Mailman REST client v3.3.5" [30/Jan/2025:05:22:44 +0000] "GET /3.1/addresses/lcgcoop(a)gmail.com HTTP/1.1" 200 401 "-" "GNU Mailman REST client v3.3.5" [30/Jan/2025:05:23:53 +0000] "GET /3.1/lists/ testing.list.louisvillecommunitygrocery.com HTTP/1.1" 200 482 "-" "GNU Mailman REST client v3.3.5" [30/Jan/2025:05:23:53 +0000] "GET /3.1/lists/ testing.list.louisvillecommunitygrocery.com HTTP/1.1" 200 482 "-" "GNU Mailman REST client v3.3.5" [30/Jan/2025:05:23:53 +0000] "GET /3.1/lists/ testing@list.louisvillecommunitygrocery.com/requests/count?token_owner=moderator HTTP/1.1" 200 73 "-" "GNU Mailman REST client v3.3.5" [30/Jan/2025:05:23:53 +0000] "GET /3.1/lists/ testing(a)list.louisvillecommunitygrocery.com/held/count HTTP/1.1" 200 73 "-" "GNU Mailman REST client v3.3.5" [30/Jan/2025:05:24:15 +0000] "GET /3.1/lists/ testing(a)list.louisvillecommunitygrocery.com HTTP/1.1" 200 482 "-" "GNU Mailman REST client v3.3.5" Jan 30 05:42:54 2025 (1550) ACCEPT: <008401db72ce$cb6d50d0$6247f270$@ iglou.com> Jan 30 05:42:55 2025 (1547) HyperKitty failure on https://list.louisvillecommunitygrocery.com/archives/api/mailman/archive: <html> <head><title>413 Request Entity Too Large</title></head> <body> <center><h1>413 Request Entity Too Large</h1></center> <hr><center>nginx/1.24.0 (Ubuntu)</center> </body> </html> (413) Jan 30 05:42:55 2025 (1547) Could not archive the message with id < CAPesOD3EWaFzfVZAbUzFm3Vk3Xnqcf9KodVic6agaT27Kmhy0w(a)mail.gmail.com> Jan 30 05:42:55 2025 (1547) archiving failed, re-queuing (mailing-list lcg-board-private.list.louisvillecommunitygrocery.com, message < CAPesOD3EWaFzfVZAbUzFm3Vk3Xnqcf9KodVic6agaT27Kmhy0w(a)mail.gmail.com>) Jan 30 05:42:55 2025 (1547) Exception in the HyperKitty archiver: <html> <head><title>413 Request Entity Too Large</title></head> <body> <center><h1>413 Request Entity Too Large</h1></center> <hr><center>nginx/1.24.0 (Ubuntu)</center> </body> </html> Jan 30 05:42:55 2025 (1547) Traceback (most recent call last): File "/opt/mailman/venv/lib/python3.12/site-packages/mailman_hyperkitty/__init__.py", line 158, in _archive_message url = self._send_message(mlist, msg) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/mailman_hyperkitty/__init__.py", line 228, in _send_message raise ValueError(result.text) ValueError: <html> <head><title>413 Request Entity Too Large</title></head> <body> <center><h1>413 Request Entity Too Large</h1></center> <hr><center>nginx/1.24.0 (Ubuntu)</center> </body> </html> Jan 30 05:42:57 2025 (1547) HyperKitty archived message <008401db72ce$cb6d50d0$6247f270$(a)iglou.com> to https://list.louisvillecommunitygrocery.com/archives/list/lcg-board-private… [2025-01-30 05:46:02 +0000] [1554] [ERROR] Worker (pid:1586) was sent SIGKILL! Perhaps out of memory? [2025-01-30 05:46:02 +0000] [2227] [INFO] Booting worker with pid: 2227 Jan 30 05:46:09 2025 (1553) pipeline runner caught SIGTERM. Stopping. Jan 30 05:46:09 2025 (1553) pipeline runner exiting. Jan 30 05:46:09 2025 (1551) lmtp runner caught SIGTERM. Stopping. Jan 30 05:46:09 2025 (1551) lmtp runner exiting. Jan 30 05:46:09 2025 (1558) digest runner caught SIGTERM. Stopping. Jan 30 05:46:09 2025 (1558) digest runner exiting. Jan 30 05:46:09 2025 (1557) virgin runner caught SIGTERM. Stopping. Jan 30 05:46:09 2025 (1557) virgin runner exiting. Jan 30 05:46:09 2025 (1556) task runner caught SIGTERM. Stopping. Jan 30 05:46:09 2025 (1556) task runner exiting. Jan 30 05:46:09 2025 (1541) Master watcher caught SIGTERM. Exiting. Jan 30 05:46:09 2025 (1555) retry runner caught SIGTERM. Stopping. Jan 30 05:46:09 2025 (1555) retry runner exiting. Jan 30 05:46:09 2025 (1552) out runner caught SIGTERM. Stopping. Jan 30 05:46:09 2025 (1552) out runner exiting. Jan 30 05:46:09 2025 (1549) command runner caught SIGTERM. Stopping. Jan 30 05:46:09 2025 (1549) command runner exiting. Jan 30 05:46:09 2025 (1548) bounces runner caught SIGTERM. Stopping. Jan 30 05:46:09 2025 (1548) bounces runner exiting. Jan 30 05:46:09 2025 (1547) archive runner caught SIGTERM. Stopping. Jan 30 05:46:09 2025 (1547) archive runner exiting. Jan 30 05:46:09 2025 (1550) in runner caught SIGTERM. Stopping. Jan 30 05:46:09 2025 (1550) in runner exiting. [2025-01-30 05:46:09 +0000] [1554] [INFO] Handling signal: term [2025-01-30 05:46:09 +0000] [2227] [INFO] Worker exiting (pid: 2227) [2025-01-30 05:46:09 +0000] [1585] [INFO] Worker exiting (pid: 1585) Jan 30 05:46:10 2025 (1541) Master watcher caught SIGTERM. Exiting. [2025-01-30 05:46:10 +0000] [1554] [ERROR] Worker (pid:1585) was sent SIGKILL! Perhaps out of memory? [2025-01-30 05:46:10 +0000] [1554] [ERROR] Worker (pid:2227) was sent SIGTERM! [2025-01-30 05:46:10 +0000] [1554] [INFO] Shutting down: Master Jan 30 05:46:11 2025 (1541) Master stopped ``` Thank you, Paul 'Arte Chambers' Robey 502-408-6922

3 13

The paradox of VERP probe messages
by Jeremy Stanley Feb. 2, 2025

Feb. 2, 2025

tl;dr: Is there a way to have VERP probe messages not include copies of the bounce message that triggered them? Longer form... Some months ago I turned on bounce processing for a fairly large list with a long history, because I could see from the MTA logs that there were easily hundreds of old subscribers whose addresses had become defunct and this seemed like a great way to clean that up and make the server more conscientious at not repeatedly trying to deliver messages to sites that were just going to reject them. This worked really well. Until legitimate subscribers also started to get removed, that is, due primarily to false positives from overzealous spam filters. I had previously read about MM3's VERP probe message feature, which seemed to solve the main reason I had kept bounce processing disabled in the MM2 days, and thought it was on by default but clearly it wasn't. So I found the necessary config option and switched that on. This worked really well. Until legitimate subscribers started to get removed again, that is, due primarily to false positives from overzealous spam filters. See, I realized that the VERP probes were helpfully including copies of the most recent bounce for that user, and those NDRs quite often helpfully included their own copies of the messages which had been bounced. So if a subscriber's MTA was rejecting a message because the content looked like spam, then there was a good chance it would also reject the VERP probe message because it included the same content which had caused the earlier rejection. The VERP probe feature was essentially defeating its own purpose as a neutral confirmation that the subscriber hadn't been rejecting messages due to their content. This behavior raises a more significant concern as well. The MTA on the Mailman server in this case (Exim if it matters) wants to perform batch deliveries when there are multiple subscribers who all share the same remote MTAs. If multiples of those reject a list post, then the NDR back to Mailman aggregates those multiple rejections into a single message. If that incident triggers a VERP probe, the bulk NDR enumerating the addresses of all the subscribers who were rejected gets forwarded along as part of the VERP probe, disclosing a potentially sensitive litany of random subscriber addresses to other subscribers within that batch. I don't know whether this is a misconfiguration, or an unintended consequence of the intersection of Mailman and MTA features. While I understand that the inclusion of a bounce sample within a VERP probe may be a way to take some workload off list admins in that users can possibly see a message/rejection to explain the reason for the probe, the downsides of that choice make the feature unfortunately unusable for some lists that could otherwise have benefited from it. Am I possibly missing an existing switch that could make VERP probe messages *not* include copies of the bounces that triggered them? This is in some ways similar to the problems I've noticed with message hold notifications to moderators including copies of the held messages, since these are (at least in the case of the lists I manage) often spam, so has a tendency to cause the mail providers for the list moderators to start considering the mailing list server a spam source. If there were a switch to make message hold notifications to moderators *not* include copies of the messages themselves, I'd start allowing moderator notifications again. Suggestions welcome! Also willing to try to submit patches to enable some of these solutions if they don't already exist. And thanks to anyone who read this far! -- Jeremy Stanley

2 4

Outgoing runner lockup? + "slice inspector" tool
by Stephen J. Turnbull Feb. 1, 2025

Feb. 1, 2025

Hi, I'm advising a user on a system which experiences occasional lockups in an outgoing runner. The runner contacts a remote smarthost, and occasionally locks up with the smtp connection still open according to "lsof -i :25". This state seems to be permanent: the backlog for that slice starts to grow without bound, for at least an hour. When this was happening once a month, they would just restart Mailman core, and the backlog would clear in minutes. But recently it's been happening daily which is distracting their staff, and worries me. Another thing that is strange about this site is that it should be possible to hit that runner with a SIGUSR1 and restart it. This works for me, but on that system the stuck runner exits, but does not restart. Since normally it only happens to one runner of several, I wanted to identify the runner and process. I attach the tool I developed, for anyone who might have configured multiple runners and is interested to see the distribution across runners. Has anybody seen an outgoing runner lock up with an open smtp session? Any ideas on why? My analysis so far: - Because a restart works every time, I'm pretty sure it doesn't have anything to do with message content. - I believe both the Mailman host and the outgoing smarthost are Linodes, in the same datacenter. The problematic Mailman system is Mailman 3.3.6, Python 3.10 on Ubuntu 16.xx LTS. I believe the smarthost is a more recent Ubuntu LTS, probably running Postfix 3.7 as the MTA. (Yes, they have sufficiently paranoid security and QA teams. ;-) - We're using smtplib, which as far as I can tell basically has a 60s timeout for each command. Thus you'd think it would time out. I guess it could be inflooping on timeout, retry, timeout, retry, but I don't know how to check that. Maybe ss(8) will serve? - My system where SIGUSR1 works as documented is Python 3.11.2 on a Digital Ocean droplet with Debian 12.9, Linux 6.1.0. - I haven't tried to reproduce the Python 3.10 + Mailman 3.3.6 configuration and test SIGUSR1 in that configuration yet. Seems unlikely, waiting for the proverbial "round tuit". - It has occurred to us to use the local Postfix as the relay MTA. I'm waiting on a report whether that alleviates the problem. Even if so, I want to fix the underlying defect if possible. Any ideas would be welcome, including general debugging advice. Here's the promised slice_inspector tool. (Patches and suggestions welcome, though I don't promise to implement any time soon.) The tool imports some files from Mailman core, click, and psutil (not psutils!) I believe the latter modules are required by Mailman, so you should be able to run it as is under the 'mailman' user (or perhaps 'list' on Debian) in the environment Mailman itself uses. It defaults to assuming that mailman.cfg is /etc/mailman3/mailman.cfg. You'll probably need to fix the shebang if you want to chmod +x. The '--help' should be pretty self-explanatory. Steve

2 1

messages with attachments, without text discarded silently
by Schulz Feb. 1, 2025

Feb. 1, 2025

Using the current mailman version, I can reproduce the following: - send a text-formatted email with attachment but without text body to a list. - the msg will be received by mailman - the msg shows up in shunt, the log shows: ile "/usr/lib/python3.12/email/message.py", line 343, in set_payload payload = payload.encode(charset.output_charset, 'surrogateescape') ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ UnicodeEncodeError: 'ascii' codec can't encode characters in position 10-17: ordinal not in range(128) an attempt to unpickle the file leads to the same error. I know it's uncommon to send emails without txt but with attachments - but it may happen; at least we would welcome an error message.

2 3

Occasionally "The content of this message was lost."
by Frank Richter Jan. 30, 2025

Jan. 30, 2025

Hello, occasionally we face the problem "The content of this message was lost." when handling a message on hold. We use the mailman3 packages on Debian 12: 3.3.8-2~deb12u2 GNU Mailman 3.3.8 (Tom Sawyer) Python 3.11.2 (main, Nov 30 2024, 21:22:50) [GCC 12.2.0] with postgresql, exim and Apache httpd on the same machine. To get closer to this problem we made 2 changes: /usr/lib/python3/dist-packages/mailman/app/moderator.py def _lost_message(mlist, subject, sender, message_id): # Create a substitute for a message not found in the message store. text = _("""\ The content of this message was lost. It was probably cross-posted to multiple lists and previously handled on another list. """) + # Don’t send an empty message to all members in case this event occurs. + # raise an exception instead: + raise Exception("_lost_message",subject, sender, message_id) /usr/lib/python3/dist-packages/mailman/runners/task.py def _evict_pendings(self): … messages = getUtility(IMessageStore) for msg in messages.messages: # msg can be None if file is already removed. if msg is not None: mid = msg.get('message-id') if mid not in mids: messages.delete_message(mid) # 2024-12-11 fri: Debug inserted + tlog.debug('Task runner deleted message %s', mid) count += 1 tlog.info('Task runner deleted %d orphaned messages', count) So let’s see what happens: A message sent to one list is set on hold: exim mainlog: 2025-01-28 14:10:23 1tclMF-00H6cW-1s <= user(a)s2024.tu-chemnitz.de H=vittal.hrz.tu-chemnitz.de (mail.tu-chemnitz.de) [2001:638:911:b01:134:109:133:32] P=esmtps X=TLS1.3:ECDHE_SECP256R1__RSA_PSS_RSAE_SHA256__AES_256_GCM:256 CV=no K S=9058 id=2f972b-6798d700-9f-5b841500@14907502 2025-01-28 14:10:23 1tclMF-00H6cW-1s => fsr-hsw(a)lists.tu-chemnitz.de R=lists_mailman T=mailman3_transport H=localhost [::1] C="250 Ok" 2025-01-28 14:10:23 1tclMF-00H6cW-1s Completed vette.log Jan 28 14:10:24 2025 (2602) HOLD: fsr-hsw(a)lists.tu-chemnitz.de post from user(a)s2024.tu-chemnitz.de held, message-id=<2f972b-6798d700-9f-5b841500@14907502>: The message is not from a list member A task runner deleted the message 5 seconds later: task.log Jan 28 14:10:29 2025 (2609) Task runner deleted message <2f972b-6798d700-9f-5b841500@14907502> Jan 28 14:10:29 2025 (2609) Task runner deleted 1 orphaned messages Later an owner/moderator want to do a moderation action: mailman.log: 2025-01-28 17:40:54 [FALCON] [ERROR] POST /3.1/lists/fsr-hsw(a)lists.tu-chemnitz.de/held/7544 => Traceback (most recent call last): File "falcon/app.py", line 365, in falcon.app.App.__call__ File "/usr/lib/python3/dist-packages/mailman/rest/post_moderation.py", line 155, in on_post handle_message(self._mlist, request_id, **arguments) File "/usr/lib/python3/dist-packages/mailman/app/moderator.py", line 144, in handle_message msg = _lost_message(mlist, subject, sender, message_id) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/mailman/app/moderator.py", line 104, in _lost_message raise Exception("_lost_message",subject, sender, message_id) Exception: ('_lost_message', 'Re: [Fsr-hsw] ...', 'user(a)s2024.tu-chemnitz.de', '<2f972b-6798d700-9f-5b841500@14907502>') Do you have any suggestions what we can do to find the reason, why the task runner deletes the message? Or any other hints … Thanks and kind regards Frank -- Frank Richter, Chemnitz University of Technology, Germany

2 1

No recent activity discussions and activity overview shown. Only a spinning wheel.
by Freerk Bosscha Jan. 30, 2025

Jan. 30, 2025

I have tried to find an equal issue, but could not find it. If so, sorry for the doubling... I have recently setup a fresh mailman3 installation on my debian12 box. It works fine. The only thing which is not working is in the archive overview I see a spinning wheel. The participants and number of discussions is increasing and the archive files are getting the archived messages. mailman -info shows: GNU Mailman 3.3.8 (Tom Sawyer) Python 3.11.2 (main, Nov 30 2024, 21:22:50) [GCC 12.2.0] config file: /etc/mailman3/mailman.cfg db url: mysql+pymysql://.....:....@localhost/mailman3?charset=utf8mb4&use_unicode=1 devmode: DISABLED REST root url: http://localhost:8001/3.1/ REST credentials: restadmin:....... mailman-web qinfo shows: -- Default 1.3.9 on ORM default -- Clusters 0 Workers 0 Restarts 0 Queued 0 Successes 100 Failures 0 Schedules 0 Tasks/day 14.00 Avg time 0.1756 Webserver: apache2/2.4.64 It looks like a AJAX problem, but not sure about that. Any help would be appriciated. Freerk What is missing

4 7

Adding Mass Subscribe custom template error
by Arte Chambers Jan. 29, 2025

Jan. 29, 2025

I am trying to test some different templates however after adding a new template I get an error when adding new list members. The member is added to the list however the welcome message isn't sent to the user. I'm getting the following error when using mass subscription on a testing list with a custom template loaded for [list:user:notice:welcome] ``` HTTP Error 400: HTTPConnectionPool(host='localhost', port=8000): Read timed out. (read timeout=5) ``` The template has the text "Testing Template" I'm not sure why it's timing out but when I remove the custom template it works as expected. The user is added to the list however doesn't get the custom welcome message. mailman.log: ``` [28/Jan/2025:20:22:47 +0000] "GET /3.1/lists/ testing.list.louisvillecommunitygrocery.com HTTP/1.1" 200 482 "-" "GNU Mailman REST client v3.3.5" Jan 28 20:22:52 2025 (1977989) deque: Traceback (most recent call last): File "/opt/mailman/venv/lib/python3.12/site-packages/urllib3/connectionpool.py", line 536, in _make_request response = conn.getresponse() ^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/urllib3/connection.py", line 507, in getresponse httplib_response = super().getresponse() ^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/http/client.py", line 1428, in getresponse response.begin() File "/usr/lib/python3.12/http/client.py", line 331, in begin version, status, reason = self._read_status() ^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/http/client.py", line 292, in _read_status line = str(self.fp.readline(_MAXLINE + 1), "iso-8859-1") ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/socket.py", line 707, in readinto return self._sock.recv_into(b) ^^^^^^^^^^^^^^^^^^^^^^^ TimeoutError: timed out The above exception was the direct cause of the following exception: Traceback (most recent call last): File "/opt/mailman/venv/lib/python3.12/site-packages/requests/adapters.py", line 667, in send resp = conn.urlopen( ^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/urllib3/connectionpool.py", line 843, in urlopen retries = retries.increment( ^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/urllib3/util/retry.py", line 474, in increment raise reraise(type(error), error, _stacktrace) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/urllib3/util/util.py", line 39, in reraise raise value File "/opt/mailman/venv/lib/python3.12/site-packages/urllib3/connectionpool.py", line 789, in urlopen response = self._make_request( ^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/urllib3/connectionpool.py", line 538, in _make_request self._raise_timeout(err=e, url=url, timeout_value=read_timeout) File "/opt/mailman/venv/lib/python3.12/site-packages/urllib3/connectionpool.py", line 369, in _raise_timeout raise ReadTimeoutError( urllib3.exceptions.ReadTimeoutError: HTTPConnectionPool(host='localhost', port=8000): Read timed out. (read timeout=5) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/app/workflow.py", line 69, in __next__ return step() ^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/app/subscriptions.py", line 362, in _step_do_subscription self.member = self.mlist.subscribe( ^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/database/transaction.py", line 106, in wrapper return function(args[0], config.db.store, *args[1:], **kws) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/model/mailinglist.py", line 540, in subscribe notify(SubscriptionEvent( File "/opt/mailman/venv/lib/python3.12/site-packages/zope/event/__init__.py", line 33, in notify subscriber(event) File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/app/membership.py", line 183, in handle_SubscriptionEvent send_welcome_message(mlist, member, member.preferred_language) File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/app/notifications.py", line 77, in send_welcome_message welcome_message = wrap(getUtility(ITemplateLoader).get( ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/model/template.py", line 192, in get contents = getUtility(ITemplateManager).get( ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/database/transaction.py", line 106, in wrapper return function(args[0], config.db.store, *args[1:], **kws) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/model/template.py", line 114, in get contents = protocols.get(actual_uri, **auth) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/utilities/protocols.py", line 39, in get response = requests.get(url, timeout=REQUEST_TIMEOUT, **kws) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/requests/api.py", line 73, in get return request("get", url, params=params, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/requests/api.py", line 59, in request return session.request(method=method, url=url, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/requests/sessions.py", line 589, in request resp = self.send(prep, **send_kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/requests/sessions.py", line 703, in send r = adapter.send(request, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/requests/adapters.py", line 713, in send raise ReadTimeout(e, request=request) requests.exceptions.ReadTimeout: HTTPConnectionPool(host='localhost', port=8000): Read timed out. (read timeout=5) Jan 28 20:22:52 2025 (1977989) HTTPConnectionPool(host='localhost', port=8000): Read timed out. (read timeout=5) Traceback (most recent call last): File "/opt/mailman/venv/lib/python3.12/site-packages/urllib3/connectionpool.py", line 536, in _make_request response = conn.getresponse() ^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/urllib3/connection.py", line 507, in getresponse httplib_response = super().getresponse() ^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/http/client.py", line 1428, in getresponse response.begin() File "/usr/lib/python3.12/http/client.py", line 331, in begin version, status, reason = self._read_status() ^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/http/client.py", line 292, in _read_status line = str(self.fp.readline(_MAXLINE + 1), "iso-8859-1") ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.12/socket.py", line 707, in readinto return self._sock.recv_into(b) ^^^^^^^^^^^^^^^^^^^^^^^ TimeoutError: timed out The above exception was the direct cause of the following exception: Traceback (most recent call last): File "/opt/mailman/venv/lib/python3.12/site-packages/requests/adapters.py", line 667, in send resp = conn.urlopen( ^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/urllib3/connectionpool.py", line 843, in urlopen retries = retries.increment( ^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/urllib3/util/retry.py", line 474, in increment raise reraise(type(error), error, _stacktrace) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/urllib3/util/util.py", line 39, in reraise raise value File "/opt/mailman/venv/lib/python3.12/site-packages/urllib3/connectionpool.py", line 789, in urlopen response = self._make_request( ^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/urllib3/connectionpool.py", line 538, in _make_request self._raise_timeout(err=e, url=url, timeout_value=read_timeout) File "/opt/mailman/venv/lib/python3.12/site-packages/urllib3/connectionpool.py", line 369, in _raise_timeout raise ReadTimeoutError( urllib3.exceptions.ReadTimeoutError: HTTPConnectionPool(host='localhost', port=8000): Read timed out. (read timeout=5) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/rest/members.py", line 385, in on_post token, token_owner, member = registrar.register( ^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/app/subscriptions.py", line 584, in register list(workflow) File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/app/workflow.py", line 69, in __next__ return step() ^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/app/subscriptions.py", line 362, in _step_do_subscription self.member = self.mlist.subscribe( ^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/database/transaction.py", line 106, in wrapper return function(args[0], config.db.store, *args[1:], **kws) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/model/mailinglist.py", line 540, in subscribe notify(SubscriptionEvent( File "/opt/mailman/venv/lib/python3.12/site-packages/zope/event/__init__.py", line 33, in notify subscriber(event) File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/app/membership.py", line 183, in handle_SubscriptionEvent send_welcome_message(mlist, member, member.preferred_language) File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/app/notifications.py", line 77, in send_welcome_message welcome_message = wrap(getUtility(ITemplateLoader).get( ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/model/template.py", line 192, in get contents = getUtility(ITemplateManager).get( ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/database/transaction.py", line 106, in wrapper return function(args[0], config.db.store, *args[1:], **kws) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/model/template.py", line 114, in get contents = protocols.get(actual_uri, **auth) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/mailman/utilities/protocols.py", line 39, in get response = requests.get(url, timeout=REQUEST_TIMEOUT, **kws) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/requests/api.py", line 73, in get return request("get", url, params=params, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/requests/api.py", line 59, in request return session.request(method=method, url=url, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/requests/sessions.py", line 589, in request resp = self.send(prep, **send_kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/requests/sessions.py", line 703, in send r = adapter.send(request, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.12/site-packages/requests/adapters.py", line 713, in send raise ReadTimeout(e, request=request) requests.exceptions.ReadTimeout: HTTPConnectionPool(host='localhost', port=8000): Read timed out. (read timeout=5) [28/Jan/2025:20:22:52 +0000] "POST /3.1/members HTTP/1.1" 400 128 "-" "GNU Mailman REST client v3.3.5" [28/Jan/2025:20:22:52 +0000] "GET /3.1/lists/ testing@list.louisvillecommunitygrocery.com/requests/count?token_owner=moderator HTTP/1.1" 200 73 "-" "GNU Mailman REST client v3.3.5" [28/Jan/2025:20:22:52 +0000] "GET /3.1/lists/ testing(a)list.louisvillecommunitygrocery.com/held/count HTTP/1.1" 200 73 "-" "GNU Mailman REST client v3.3.5" [28/Jan/2025:20:26:15 +0000] "GET /3.1/lists/ testing.list.louisvillecommunitygrocery.com HTTP/1.1" 200 482 "-" "GNU Mailman REST client v3.3.5" [28/Jan/2025:20:26:15 +0000] "GET /3.1/lists/ testing.list.louisvillecommunitygrocery.com HTTP/1.1" 200 482 "-" "GNU Mailman REST client v3.3.5" [28/Jan/2025:20:26:15 +0000] "GET /3.1/lists/ testing@list.louisvillecommunitygrocery.com/requests/count?token_owner=moderator HTTP/1.1" 200 73 "-" "GNU Mailman REST client v3.3.5" [28/Jan/2025:20:26:15 +0000] "GET /3.1/lists/ testing(a)list.louisvillecommunitygrocery.com/held/count HTTP/1.1" 200 73 "-" "GNU Mailman REST client v3.3.5" [28/Jan/2025:20:26:39 +0000] "GET /3.1/lists/ testing.list.louisvillecommunitygrocery.com HTTP/1.1" 200 482 "-" "GNU Mailman REST client v3.3.5" [28/Jan/2025:20:26:39 +0000] "GET /3.1/lists/ testing.list.louisvillecommunitygrocery.com HTTP/1.1" 200 482 "-" "GNU Mailman REST client v3.3.5" [28/Jan/2025:20:26:39 +0000] "GET /3.1/lists/ testing@list.louisvillecommunitygrocery.com/requests/count?token_owner=moderator HTTP/1.1" 200 73 "-" "GNU Mailman REST client v3.3.5" [28/Jan/2025:20:26:39 +0000] "GET /3.1/lists/ testing(a)list.louisvillecommunitygrocery.com/held/count HTTP/1.1" 200 73 "-" "GNU Mailman REST client v3.3.5" ``` Thank you, Paul 'Arte Chambers' Robey 502-408-6922

3 9

mailman3-web postorious error "invalid request block size: 14056 (max 4096)...skip"
by Frederik Jan. 28, 2025

Jan. 28, 2025

Until about one month ago, I had mailman3 and mailman3-web successfully running on Debian 12. However, when I access any page such as https://example.com/mailman3/postorius/lists/ now, I just get a 500 server error. /var/log/mailman3/web/mailman-web.log logs this at every request: invalid request block size: 14056 (max 4096)...skip I read somewhere that adding buffer-size = 65536 to uwsgi.ini might help. It indeed makes a difference, but unfortunately I just get another error instead: [pid: 4067215|app: -1|req: -1/1] () {256 vars in 14055 bytes} [Tue Jan 28 18:06:30 2025] => generated 0 bytes in 0 msecs ( 500) 0 headers in 0 bytes (1 switches on core 0) There are no other errors in the logs. I proxy mailman in Apache like this: Alias /mailman3/favicon.ico /var/lib/mailman3/web/static/postorius/img/favicon.ico Alias /mailman3/static /var/lib/mailman3/web/static <Directory "/var/lib/mailman3/web/static"> Require all granted </Directory> <IfModule mod_proxy_uwsgi.c> ProxyPass /mailman3/favicon.ico ! ProxyPass /mailman3/static ! ProxyPass /mailman3 unix:/run/mailman3-web/uwsgi.sock|uwsgi://localhost-mailman3/ </IfModule> and mailman3's uwsgi.ini looks like this: [uwsgi] uwsgi-socket = /run/mailman3-web/uwsgi.sock enable-threads = true chdir = /usr/share/mailman3-web wsgi-file = wsgi.py master = true process = 2 threads = 2 uid = www-data gid = www-data env = HOME=/tmp plugins = python3 attach-daemon = python3 manage.py qcluster logto = /var/log/mailman3/web/mailman-web.log buffer-size = 65536 Any idea what could be wrong or how to debug this further? I'm using mailman3-full 3.3.8-2~deb12u2 and mailman3-web 0+20240312-1 packages.

2 1

Filter response from Mailman3 held messages queue.
by Andy Matthews Jan. 28, 2025

Jan. 28, 2025

I'm working on an update to a portion of my team's application. It retrieves the held messages from Mailman and returns them to the client so that our admins can approve/reject them. At the moment it works as intended, but displays far too much information because Mailman is returning the entire email, with headers (see below). I've found some libraries which can parse the message property and extract the relevant bits, but I'd rather pass some sort of flag or filter to the initial Mailman 3 API call and get back less information. I've looked through the documentation but I'm not finding anything of the sort. Would this be useful? ``` { "request_id": "1", "original_size": 855, "sender": "dev(a)email.org", "subject": "Testing one two three", "hold_date": new Date(), "msg": "Received: from [127.0.0.1] (localhost [127.0.0.1])\n\t(using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)\n\t key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256)\n\t(No client certificate requested)\n\t(Authenticated sender: dev(a)email.org)\n\tby mailman.default.svc.cluster.local (Postfix) with ESMTPSA id A48A33E9849\n\tfor <abc-announce(a)email.org>; Thu, 23 Jan 2025 21:24:11 +0000 (UTC)\nMessage-ID: <3ecbaccf-f65a-4ce5-bdfa-e08b5659dc32(a)email.org>\nDate: Thu, 23 Jan 2025 15:24:11 -0600\nMIME-Version: 1.0\nUser-Agent: Mozilla Thunderbird\nContent-Language: en-US\nTo: abc-announce(a)email.org\nFrom: Dev Tester <dev(a)email.org>\nSubject: Testing one two three\nContent-Type: text/plain; charset=UTF-8; format=flowed\nContent-Transfer-Encoding: 7bit\nX-MailFrom: dev(a)email.org\nX-Mailman-Rule-Hits: nonmember-moderation\nX-Mailman-Rule-Misses: dmarc-mitigation; no-senders; approved; emergency; loop; banned-address; member-moderation\nMessage-ID-Hash: XM4OS47LU7DRYIO74WB5K4W345NPZ37O\nX-Message-ID-Hash: XM4OS47LU7DRYIO74WB5K4W345NPZ37O\n\nThis is a single line message body.\n\n" } ```

2 2

Mailman3 breaking DKIM signatures
by Jef Driesen Jan. 24, 2025

Jan. 24, 2025

Hi, I have configured a mailman3 mailinglist to not modify the headers and body (e.g. no footer, no subject prefix, etc) to avoid breaking DKIM signatures. This worked well, until I encountered an email where the DKIM signature was still broken. After some debugging, the problem is caused by an attachment, where the mime header is changed by mailman3. The original mail contains this: --------------nYYjj8vJ8CNKuoHJZKVOQh20 Content-Type: application/vnd.openxmlformats-officedocument.spreadsheetml.sheet; name="filename.xlsx" Content-Disposition: attachment; filename="filename.xlsx" Content-Transfer-Encoding: base64 Mailman3 modified these into this: --------------nYYjj8vJ8CNKuoHJZKVOQh20 Content-Type: application/vnd.openxmlformats-officedocument.spreadsheetml.sheet; name="filename.xlsx" Content-Disposition: attachment; filename="filename.xlsx" Content-Transfer-Encoding: base64 The Content-Type header is modified (word-wrapped), and this breaks the DKIM signature. How can I prevent this from happening and configure mailman to not modify the email? Jef

5 6

Python 3.13 compatibility
by peter＠chubb.wattle.id.au Jan. 24, 2025

Jan. 24, 2025

Hi Folks, I'm running the Debian-packaged mailman3 (version 3.8) which is a little behind the current 3.9 release ... Debian is now shipping Python 3.13 in 'sid'. https://docs.python.org/3/whatsnew/3.13.html#id4 says: Remove the ability to use Path objects as context managers. This functionality was deprecated and has had no effect since Python 3.9. (Contributed by Barney Gale in gh-83863.) As a result, I'm hitting tracebacks from many operations where pathlib.Path objects are used as context managers, like this one: path, fp = find(default_uri, mlist, code) ~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/mailman/utilities/i18n.py", line 157, in find for search_path in raw_search_order: ^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/mailman/utilities/i18n.py", line 117, in search templates_dir = str(resources.enter_context( ~~~~~~~~~~~~~~~~~~~~~~~^ files('mailman').joinpath('templates'))) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.13/contextlib.py", line 528, in enter_context raise TypeError(f"'{cls.__module__}.{cls.__qualname__}' object does " f"not support the context manager protocol") from None TypeError: 'pathlib._local.PosixPath' object does not support the context manager protocol Given that the python3.13 change is only to move a noop to an exception, it may be that this is a bug for python 3.9 and up as well. Peter C

2 1

m3 database sizing
by Alexander Inzinger-Zrock Jan. 23, 2025

Jan. 23, 2025

Ahoi, has anyone A) spent thoughts (and is willing to share them) about database sizing for an mailman3-production-system? like: space per user + other data + estimated growth = warning to give to my database-admin or B) has some empirical values and would like to share? greetings aiz P.S. this post is related to another about database contents

3 3

m3 database contents
by Alexander Inzinger-Zrock Jan. 22, 2025

Jan. 22, 2025

Ahoi, except for [1] i was not able to find anything about what kind of data will be stored in the database(s) of a mailman3-system. could somebody kindly point me to some documentation i perhaps missed out? or share some insights? greetings aiz P.S. this post is related to another about database sizing [1] https://docs.mailman3.org/en/latest/architecture.html#understanding-user-an…

2 1

Hyperkitty not receaving messages / empty archive [Django] ERROR (EXTERNAL IP): Internal Server Error: /hyperkitty/api/mailman/urls
by Helge Baumgart Jan. 22, 2025

Jan. 22, 2025

Hello Everybody, i have set up a fresh mailman3 installation with maxkings Docker compose image (https://github.com/maxking/docker-mailman) I've got it working except i get a very strange hyperkitty error: Each time i'm sending a post to the list, it gets distributed to the emailadresses of the list, and at the same time i'm geting a bunch of error Mails. And: There are no Mails visible in the Archive. The directory under core/var/archive/hyperkitty/spool/ listst the mails....though... Hyperkitty-Api-Key in the docker-compose.yml is set via .env Variabel, so it should be identical. That ist the error Mail i receive: Can annybody hint me where to search further, what is wrong? If searched insesivly but found nothing as of jet.... :-( Thank you in advance! Helge Internal Server Error: /hyperkitty/api/mailman/urls TypeError at /hyperkitty/api/mailman/urls unsupported operand types(s) or combination of types: 'str' and 'NoneType' Request Method: GET Request URL:http://mailman-web:8000/hyperkitty/api/mailman/urls?mlist=test%40lists.mydomain.net&msgid=2291673b-c760-4651-8025-ae170429d587%40web.de Django Version: 4.1.12 Python Executable: /usr/bin/uwsgi Python Version: 3.11.6 Python Path: ['.', '', '/usr/lib/python311.zip', '/usr/lib/python3.11', '/usr/lib/python3.11/lib-dynload', '/usr/lib/python3.11/site-packages'] Server time: Tue, 21 Jan 2025 13:12:13 +0000 Installed Applications: ['hyperkitty', 'postorius', 'django_mailman3', 'django.contrib.admin', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.staticfiles', 'rest_framework', 'django_gravatar', 'compressor', 'haystack', 'django_extensions', 'django_q', 'allauth', 'allauth.account', 'allauth.socialaccount', 'django_mailman3.lib.auth.fedora', 'allauth.socialaccount.providers.openid', 'allauth.socialaccount.providers.github', 'allauth.socialaccount.providers.gitlab', 'allauth.socialaccount.providers.google'] Installed Middleware: ('django.contrib.sessions.middleware.SessionMiddleware', 'django.middleware.common.CommonMiddleware', 'django.middleware.csrf.CsrfViewMiddleware', 'django.middleware.locale.LocaleMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', 'django.contrib.messages.middleware.MessageMiddleware', 'django.middleware.clickjacking.XFrameOptionsMiddleware', 'django.middleware.security.SecurityMiddleware', 'allauth.account.middleware.AccountMiddleware', 'django_mailman3.middleware.TimezoneMiddleware', 'postorius.middleware.PostoriusMiddleware') Traceback (most recent call last): File "/usr/lib/python3.11/site-packages/django/core/handlers/exception.py", line 56, in inner response = get_response(request) File "/usr/lib/python3.11/site-packages/django/core/handlers/base.py", line 197, in _get_response response = wrapped_callback(request, *callback_args, **callback_kwargs) File "/usr/lib/python3.11/site-packages/hyperkitty/views/mailman.py", line 109, in _decorator not hmac.compare_digest( Exception Type: TypeError at /hyperkitty/api/mailman/urls Exception Value: unsupported operand types(s) or combination of types: 'str' and 'NoneType' Raised during: hyperkitty.views.mailman.urls Request information: USER: AnonymousUser GET: mlist = 'test(a)lists.mydomain.net' msgid = '2291673b-c760-4651-8025-ae170429d587(a)web.de' POST: No POST data FILES: No FILES data COOKIES: No cookie data META: HTTP_ACCEPT = '*/*' HTTP_ACCEPT_ENCODING = 'gzip, deflate' HTTP_AUTHORIZATION = 'Token 3ezHkyhUqlD0qB2LiLb4xORyuVFCwimlVZidlOk7XJqjy9QBaNM6O0w4aSR162bN2tIFMdWFKOpfQ1Zq5QYrrVE4IsNFGvkLfGwbf58uENJmUD2yvA0pGXTlvLc3KFD1' HTTP_CONNECTION = 'keep-alive' HTTP_HOST = 'mailman-web:8000' HTTP_USER_AGENT = 'python-requests/2.31.0' PATH_INFO = '/hyperkitty/api/mailman/urls' QUERY_STRING = 'mlist=test%40lists.mydomain.net&msgid=2291673b-c760-4651-8025-ae170429d587%40web.de' REMOTE_ADDR = '172.26.0.2' REQUEST_METHOD = 'GET' REQUEST_URI = '/hyperkitty/api/mailman/urls?mlist=test%40lists.mydomain.net&msgid=2291673b-c760-4651-8025-ae170429d587%40web.de' SCRIPT_NAME = '' SERVER_NAME = 'mailman-web' SERVER_PORT = '8000' SERVER_PROTOCOL = 'HTTP/1.1' uwsgi.core = 1 uwsgi.node = b'mailman-web' uwsgi.version = b'2.0.22' wsgi.errors = <_io.TextIOWrapper name=2 mode='w' encoding='UTF-8'> wsgi.file_wrapper = <built-in function uwsgi_sendfile> wsgi.input = <uwsgi._Input object at 0x790fb0ef82b0> wsgi.multiprocess = True wsgi.multithread = True wsgi.run_once = False wsgi.url_scheme = 'http' wsgi.version = '(1, 0)' Settings: Using settings module settings ABSOLUTE_URL_OVERRIDES = {} ACCOUNT_AUTHENTICATION_METHOD = 'username_email' ACCOUNT_DEFAULT_HTTP_PROTOCOL = 'https' ACCOUNT_EMAIL_REQUIRED = True ACCOUNT_EMAIL_VERIFICATION = 'mandatory' ACCOUNT_UNIQUE_EMAIL = True ADMINS = "(('Mailman Suite Admin', 'it(a)mydomain.net'),)" ALLOWED_HOSTS = ['localhost', 'mailman-web', '172.26.0.3', 'lists.mydomain.net', 'lists.mydomain.net'] APPEND_SLASH = True AUTHENTICATION_BACKENDS = "('django.contrib.auth.backends.ModelBackend', 'allauth.account.auth_backends.AuthenticationBackend')" AUTH_PASSWORD_VALIDATORS = '********************' AUTH_USER_MODEL = 'auth.User' BASE_DIR = '/opt/mailman-web' CACHES = {'default': {'BACKEND': 'diskcache.DjangoCache', 'LOCATION': '/opt/mailman-web-data/diskcache', 'OPTIONS': {'size_limit': 1073741824}}} CACHE_MIDDLEWARE_ALIAS = 'default' CACHE_MIDDLEWARE_KEY_PREFIX = '********************' CACHE_MIDDLEWARE_SECONDS = 600 COMPRESSORS = {'css': 'compressor.css.CssCompressor', 'js': 'compressor.js.JsCompressor'} COMPRESS_CACHEABLE_PRECOMPILERS = '()' COMPRESS_CACHE_BACKEND = 'default' COMPRESS_CACHE_KEY_FUNCTION = '********************' COMPRESS_CLEAN_CSS_ARGUMENTS = '' COMPRESS_CLEAN_CSS_BINARY = 'cleancss' COMPRESS_CLOSURE_COMPILER_ARGUMENTS = '' COMPRESS_CLOSURE_COMPILER_BINARY = 'java -jar compiler.jar' COMPRESS_CSS_HASHING_METHOD = 'mtime' COMPRESS_DATA_URI_MAX_SIZE = 1024 COMPRESS_DEBUG_TOGGLE = None COMPRESS_ENABLED = True COMPRESS_FILTERS = {'css': ['compressor.filters.css_default.CssAbsoluteFilter', 'compressor.filters.cssmin.rCSSMinFilter'], 'js': ['compressor.filters.jsmin.rJSMinFilter']} COMPRESS_JINJA2_GET_ENVIRONMENT = <function CompressorConf.JINJA2_GET_ENVIRONMENT at 0x790fb2323420> COMPRESS_MINT_DELAY = 30 COMPRESS_MTIME_DELAY = 10 COMPRESS_OFFLINE = False COMPRESS_OFFLINE_CONTEXT = {'STATIC_URL': '/static/'} COMPRESS_OFFLINE_MANIFEST = 'manifest.json' COMPRESS_OFFLINE_MANIFEST_STORAGE = 'compressor.storage.OfflineManifestFileStorage' COMPRESS_OFFLINE_TIMEOUT = 31536000 COMPRESS_OUTPUT_DIR = 'CACHE' COMPRESS_PARSER = 'compressor.parser.AutoSelectParser' COMPRESS_PRECOMPILERS = "(('text/less', 'lessc {infile} {outfile}'), ('text/x-scss', 'sassc -t compressed {infile} {outfile}'), ('text/x-sass', 'sassc -t compressed {infile} {outfile}'))" COMPRESS_REBUILD_TIMEOUT = 2592000 COMPRESS_ROOT = '/opt/mailman-web-data/static' COMPRESS_STORAGE = 'compressor.storage.CompressorFileStorage' COMPRESS_TEMPLATE_FILTER_CONTEXT = {'STATIC_URL': '/static/'} COMPRESS_URL = '/static/' COMPRESS_URL_PLACEHOLDER = '/__compressor_url_placeholder__/' COMPRESS_VERBOSE = False COMPRESS_YUGLIFY_BINARY = 'yuglify' COMPRESS_YUGLIFY_CSS_ARGUMENTS = '--terminal' COMPRESS_YUGLIFY_JS_ARGUMENTS = '--terminal' COMPRESS_YUI_BINARY = 'java -jar yuicompressor.jar' COMPRESS_YUI_CSS_ARGUMENTS = '' COMPRESS_YUI_JS_ARGUMENTS = '' CSRF_COOKIE_AGE = 31449600 CSRF_COOKIE_DOMAIN = None CSRF_COOKIE_HTTPONLY = False CSRF_COOKIE_MASKED = False CSRF_COOKIE_NAME = 'csrftoken' CSRF_COOKIE_PATH = '/' CSRF_COOKIE_SAMESITE = 'Lax' CSRF_COOKIE_SECURE = False CSRF_FAILURE_VIEW = 'django.views.csrf.csrf_failure' CSRF_HEADER_NAME = 'HTTP_X_CSRFTOKEN' CSRF_TRUSTED_ORIGINS = [] CSRF_USE_SESSIONS = False DATABASES = {'default': {'NAME': 'mailmandb', 'USER': 'mailman', 'PASSWORD': '********************', 'HOST': 'database', 'PORT': '', 'CONN_MAX_AGE': 600, 'CONN_HEALTH_CHECKS': False, 'ENGINE': 'django.db.backends.postgresql', 'ATOMIC_REQUESTS': False, 'AUTOCOMMIT': True, 'OPTIONS': {}, 'TIME_ZONE': None, 'TEST': {'CHARSET': None, 'COLLATION': None, 'MIGRATE': True, 'MIRROR': None, 'NAME': None}}} DATABASE_ROUTERS = [] DATA_UPLOAD_MAX_MEMORY_SIZE = 2621440 DATA_UPLOAD_MAX_NUMBER_FIELDS = 1000 DATA_UPLOAD_MAX_NUMBER_FILES = 100 DATETIME_FORMAT = 'N j, Y, P' DATETIME_INPUT_FORMATS = ['%Y-%m-%d %H:%M:%S', '%Y-%m-%d %H:%M:%S.%f', '%Y-%m-%d %H:%M', '%m/%d/%Y %H:%M:%S', '%m/%d/%Y %H:%M:%S.%f', '%m/%d/%Y %H:%M', '%m/%d/%y %H:%M:%S', '%m/%d/%y %H:%M:%S.%f', '%m/%d/%y %H:%M'] DATE_FORMAT = 'N j, Y' DATE_INPUT_FORMATS = ['%Y-%m-%d', '%m/%d/%Y', '%m/%d/%y', '%b %d %Y', '%b %d, %Y', '%d %b %Y', '%d %b, %Y', '%B %d %Y', '%B %d, %Y', '%d %B %Y', '%d %B, %Y'] DEBUG = False DEBUG_PROPAGATE_EXCEPTIONS = False DECIMAL_SEPARATOR = '.' DEFAULT_APPS = ['hyperkitty', 'postorius', 'django_mailman3', 'django.contrib.admin', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.staticfiles', 'rest_framework', 'django_gravatar', 'compressor', 'haystack', 'django_extensions', 'django_q', 'allauth', 'allauth.account', 'allauth.socialaccount'] DEFAULT_AUTO_FIELD = 'django.db.models.AutoField' DEFAULT_CHARSET = 'utf-8' DEFAULT_EXCEPTION_REPORTER = 'django.views.debug.ExceptionReporter' DEFAULT_EXCEPTION_REPORTER_FILTER = 'django.views.debug.SafeExceptionReporterFilter' DEFAULT_FILE_STORAGE = 'django.core.files.storage.FileSystemStorage' DEFAULT_FROM_EMAIL = 'lists(a)mydomain.net' DEFAULT_INDEX_TABLESPACE = '' DEFAULT_TABLESPACE = '' DISALLOWED_USER_AGENTS = [] DISKCACHE_PATH = '/opt/mailman-web-data/diskcache' DISKCACHE_SIZE = 1073741824 EMAIL_BACKEND = 'django.core.mail.backends.smtp.EmailBackend' EMAIL_HOST = '172.26.0.5' EMAIL_HOST_PASSWORD = '********************' EMAIL_HOST_USER = '' EMAIL_PORT = 25 EMAIL_SSL_CERTFILE = None EMAIL_SSL_KEYFILE = '********************' EMAIL_SUBJECT_PREFIX = '[Django] ' EMAIL_TIMEOUT = None EMAIL_USE_LOCALTIME = False EMAIL_USE_SSL = False EMAIL_USE_TLS = False FILE_UPLOAD_DIRECTORY_PERMISSIONS = None FILE_UPLOAD_HANDLERS = ['django.core.files.uploadhandler.MemoryFileUploadHandler', 'django.core.files.uploadhandler.TemporaryFileUploadHandler'] FILE_UPLOAD_MAX_MEMORY_SIZE = 2621440 FILE_UPLOAD_PERMISSIONS = 420 FILE_UPLOAD_TEMP_DIR = None FILTER_VHOST = False FIRST_DAY_OF_WEEK = 0 FIXTURE_DIRS = [] FORCE_SCRIPT_NAME = None FORMAT_MODULE_PATH = None FORM_RENDERER = 'django.forms.renderers.DjangoTemplates' HAYSTACK_CONNECTIONS = {'default': {'ENGINE': 'haystack.backends.whoosh_backend.WhooshEngine', 'PATH': '/opt/mailman-web-data/fulltext_index'}} IGNORABLE_404_URLS = [] INSTALLED_APPS = ['hyperkitty', 'postorius', 'django_mailman3', 'django.contrib.admin', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.staticfiles', 'rest_framework', 'django_gravatar', 'compressor', 'haystack', 'django_extensions', 'django_q', 'allauth', 'allauth.account', 'allauth.socialaccount', 'django_mailman3.lib.auth.fedora', 'allauth.socialaccount.providers.openid', 'allauth.socialaccount.providers.github', 'allauth.socialaccount.providers.gitlab', 'allauth.socialaccount.providers.google'] INTERNAL_IPS = [] LANGUAGES = [('af', 'Afrikaans'), ('ar', 'Arabic'), ('ar-dz', 'Algerian Arabic'), ('ast', 'Asturian'), ('az', 'Azerbaijani'), ('bg', 'Bulgarian'), ('be', 'Belarusian'), ('bn', 'Bengali'), ('br', 'Breton'), ('bs', 'Bosnian'), ('ca', 'Catalan'), ('cs', 'Czech'), ('cy', 'Welsh'), ('da', 'Danish'), ('de', 'German'), ('dsb', 'Lower Sorbian'), ('el', 'Greek'), ('en', 'English'), ('en-au', 'Australian English'), ('en-gb', 'British English'), ('eo', 'Esperanto'), ('es', 'Spanish'), ('es-ar', 'Argentinian Spanish'), ('es-co', 'Colombian Spanish'), ('es-mx', 'Mexican Spanish'), ('es-ni', 'Nicaraguan Spanish'), ('es-ve', 'Venezuelan Spanish'), ('et', 'Estonian'), ('eu', 'Basque'), ('fa', 'Persian'), ('fi', 'Finnish'), ('fr', 'French'), ('fy', 'Frisian'), ('ga', 'Irish'), ('gd', 'Scottish Gaelic'), ('gl', 'Galician'), ('he', 'Hebrew'), ('hi', 'Hindi'), ('hr', 'Croatian'), ('hsb', 'Upper Sorbian'), ('hu', 'Hungarian'), ('hy', 'Armenian'), ('ia', 'Interlingua'), ('id', 'Indonesian'), ('ig', 'Igbo'), ('io', 'Ido'), ('is', 'Icelandic'), ('it', 'Italian'), ('ja', 'Japanese'), ('ka', 'Georgian'), ('kab', 'Kabyle'), ('kk', 'Kazakh'), ('km', 'Khmer'), ('kn', 'Kannada'), ('ko', 'Korean'), ('ky', 'Kyrgyz'), ('lb', 'Luxembourgish'), ('lt', 'Lithuanian'), ('lv', 'Latvian'), ('mk', 'Macedonian'), ('ml', 'Malayalam'), ('mn', 'Mongolian'), ('mr', 'Marathi'), ('ms', 'Malay'), ('my', 'Burmese'), ('nb', 'Norwegian Bokmål'), ('ne', 'Nepali'), ('nl', 'Dutch'), ('nn', 'Norwegian Nynorsk'), ('os', 'Ossetic'), ('pa', 'Punjabi'), ('pl', 'Polish'), ('pt', 'Portuguese'), ('pt-br', 'Brazilian Portuguese'), ('ro', 'Romanian'), ('ru', 'Russian'), ('sk', 'Slovak'), ('sl', 'Slovenian'), ('sq', 'Albanian'), ('sr', 'Serbian'), ('sr-latn', 'Serbian Latin'), ('sv', 'Swedish'), ('sw', 'Swahili'), ('ta', 'Tamil'), ('te', 'Telugu'), ('tg', 'Tajik'), ('th', 'Thai'), ('tk', 'Turkmen'), ('tr', 'Turkish'), ('tt', 'Tatar'), ('udm', 'Udmurt'), ('uk', 'Ukrainian'), ('ur', 'Urdu'), ('uz', 'Uzbek'), ('vi', 'Vietnamese'), ('zh-hans', 'Simplified Chinese'), ('zh-hant', 'Traditional Chinese')] LANGUAGES_BIDI = ['he', 'ar', 'ar-dz', 'fa', 'ur'] LANGUAGE_CODE = 'en-us' LANGUAGE_COOKIE_AGE = None LANGUAGE_COOKIE_DOMAIN = None LANGUAGE_COOKIE_HTTPONLY = False LANGUAGE_COOKIE_NAME = 'django_language' LANGUAGE_COOKIE_PATH = '/' LANGUAGE_COOKIE_SAMESITE = None LANGUAGE_COOKIE_SECURE = False LOCALE_PATHS = [] LOGGING = {'version': 1, 'disable_existing_loggers': False, 'filters': {'require_debug_false': {'()': 'django.utils.log.RequireDebugFalse'}}, 'handlers': {'mail_admins': {'level': 'ERROR', 'filters': ['require_debug_false'], 'class': 'django.utils.log.AdminEmailHandler'}, 'file': {'level': 'INFO', 'class': 'logging.handlers.RotatingFileHandler', 'filename': '/opt/mailman-web-data/logs/mailmanweb.log', 'formatter': 'verbose'}, 'console': {'class': 'logging.StreamHandler', 'formatter': 'simple', 'level': 'INFO', 'stream': <_io.TextIOWrapper name=2 mode='w' encoding='UTF-8'>}}, 'loggers': {'django.request': {'handlers': ['mail_admins', 'file'], 'level': 'INFO', 'propagate': True}, 'django': {'handlers': ['file'], 'level': 'INFO', 'propagate': True}, 'hyperkitty': {'handlers': ['file'], 'level': 'INFO', 'propagate': True}, 'postorius': {'handlers': ['file'], 'level': 'INFO', 'propagate': True}}, 'formatters': {'verbose': {'format': '%(levelname)s %(asctime)s %(process)d %(name)s %(message)s'}, 'simple': {'format': '%(levelname)s %(message)s'}}} LOGGING_CONFIG = 'logging.config.dictConfig' LOGIN_REDIRECT_URL = 'list_index' LOGIN_URL = 'account_login' LOGOUT_REDIRECT_URL = None LOGOUT_URL = 'account_logout' MAILMAN_ARCHIVER_FROM = "('172.26.0.2',)" MAILMAN_ARCHIVER_KEY = '********************' MAILMAN_REST_API_PASS = '********************' MAILMAN_REST_API_URL = '********************' MAILMAN_REST_API_USER = '********************' MAILMAN_WEB_SOCIAL_AUTH = ['django_mailman3.lib.auth.fedora', 'allauth.socialaccount.providers.openid', 'allauth.socialaccount.providers.github', 'allauth.socialaccount.providers.gitlab', 'allauth.socialaccount.providers.google'] MANAGERS = [] MEDIA_ROOT = '' MEDIA_URL = '/' MESSAGE_STORAGE = 'django.contrib.messages.storage.fallback.FallbackStorage' MESSAGE_TAGS = {40: 'danger'} MIDDLEWARE = "('django.contrib.sessions.middleware.SessionMiddleware', 'django.middleware.common.CommonMiddleware', 'django.middleware.csrf.CsrfViewMiddleware', 'django.middleware.locale.LocaleMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', 'django.contrib.messages.middleware.MessageMiddleware', 'django.middleware.clickjacking.XFrameOptionsMiddleware', 'django.middleware.security.SecurityMiddleware', 'allauth.account.middleware.AccountMiddleware', 'django_mailman3.middleware.TimezoneMiddleware', 'postorius.middleware.PostoriusMiddleware')" MIGRATION_MODULES = {} MONTH_DAY_FORMAT = 'F j' NUMBER_GROUPING = 0 PASSWORD_HASHERS = '********************' PASSWORD_RESET_TIMEOUT = '********************' POSTORIUS_TEMPLATE_BASE_URL = 'http://mailman-web:8000' PREPEND_WWW = False Q_CLUSTER = {'timeout': 300, 'retry': 300, 'save_limit': 100, 'orm': 'default'} ROOT_URLCONF = 'urls' SECRET_KEY = '********************' SECRET_KEY_FALLBACKS = '********************' SECURE_CONTENT_TYPE_NOSNIFF = True SECURE_CROSS_ORIGIN_OPENER_POLICY = 'same-origin' SECURE_HSTS_INCLUDE_SUBDOMAINS = False SECURE_HSTS_PRELOAD = False SECURE_HSTS_SECONDS = 0 SECURE_PROXY_SSL_HEADER = None SECURE_REDIRECT_EXEMPT = [] SECURE_REFERRER_POLICY = 'same-origin' SECURE_SSL_HOST = None SECURE_SSL_REDIRECT = False SERVER_EMAIL = 'lists(a)mydomain.net' SESSION_CACHE_ALIAS = 'default' SESSION_COOKIE_AGE = 1209600 SESSION_COOKIE_DOMAIN = None SESSION_COOKIE_HTTPONLY = True SESSION_COOKIE_NAME = 'sessionid' SESSION_COOKIE_PATH = '/' SESSION_COOKIE_SAMESITE = 'Lax' SESSION_COOKIE_SECURE = False SESSION_ENGINE = 'django.contrib.sessions.backends.db' SESSION_EXPIRE_AT_BROWSER_CLOSE = False SESSION_FILE_PATH = None SESSION_SAVE_EVERY_REQUEST = False SESSION_SERIALIZER = 'django.contrib.sessions.serializers.PickleSerializer' SETTINGS_MODULE = 'settings' SHORT_DATETIME_FORMAT = 'm/d/Y P' SHORT_DATE_FORMAT = 'm/d/Y' SIGNING_BACKEND = 'django.core.signing.TimestampSigner' SILENCED_SYSTEM_CHECKS = [] SITE_ID = 1 SOCIALACCOUNT_PROVIDERS = {'openid': {'SERVERS': [{'id': 'yahoo', 'name': 'Yahoo', 'openid_url': 'http://me.yahoo.com'}]}, 'google': {'SCOPE': ['profile', 'email'], 'AUTH_PARAMS': {'access_type': 'online'}}, 'facebook': {'METHOD': 'oauth2', 'SCOPE': ['email'], 'FIELDS': ['email', 'name', 'first_name', 'last_name', 'locale', 'timezone'], 'VERSION': 'v2.4'}} STATICFILES_DIRS = [] STATICFILES_FINDERS = "('django.contrib.staticfiles.finders.FileSystemFinder', 'django.contrib.staticfiles.finders.AppDirectoriesFinder', 'compressor.finders.CompressorFinder')" STATICFILES_STORAGE = 'django.contrib.staticfiles.storage.StaticFilesStorage' STATIC_ROOT = '/opt/mailman-web-data/static' STATIC_URL = '/static/' TEMPLATES = [{'BACKEND': 'django.template.backends.django.DjangoTemplates', 'DIRS': [], 'APP_DIRS': True, 'OPTIONS': {'context_processors': ['django.template.context_processors.debug', 'django.template.context_processors.i18n', 'django.template.context_processors.media', 'django.template.context_processors.static', 'django.template.context_processors.tz', 'django.template.context_processors.csrf', 'django.template.context_processors.request', 'django.contrib.auth.context_processors.auth', 'django.contrib.messages.context_processors.messages', 'django_mailman3.context_processors.common', 'hyperkitty.context_processors.common', 'postorius.context_processors.postorius']}}] TEST_NON_SERIALIZED_APPS = [] TEST_RUNNER = 'django.test.runner.DiscoverRunner' THOUSAND_SEPARATOR = ',' TIME_FORMAT = 'P' TIME_INPUT_FORMATS = ['%H:%M:%S', '%H:%M:%S.%f', '%H:%M'] TIME_ZONE = 'UTC' USE_DEPRECATED_PYTZ = False USE_I18N = True USE_L10N = True USE_SSL = False USE_THOUSAND_SEPARATOR = False USE_TZ = True USE_X_FORWARDED_HOST = True USE_X_FORWARDED_PORT = False WSGI_APPLICATION = 'wsgi.application' X_FRAME_OPTIONS = 'DENY' YEAR_MONTH_FORMAT = 'F Y' That is my docker-compose.yml: services: postfix: image: boky/postfix #mailu/postfix restart: unless-stopped container_name: postfix #_incomming volumes: - ./data/postfix/etc:/etc/postfix/ #main.cf.d - ./data/core:/opt/mailman ports: - "${MM3_INTERNAL_POSTFIX_SMTP_PORT}:25" - "${MM3_INTERNAL_POSTFIX_SUBM_PORT}:587" environment: - HOSTNAME=${MM3_HOSTNAME} - RELAYHOST=${MM3_RELAYHOST} #- RELAYHOST_USERNAME=${MM3_RELAYHOST_USERNAME} # = An (optional) username for the relay server #- RELAYHOST_PASSWORD=${MM3_RELAYHOST_PASSWORD} # = An (optional) login password for the relay server - POSTFIX_mynetworks=${MM3_POSTFIX_mynetworks} #=127.0.0.0/24,10.8.0.0/24,172.26.0.0/24,192.168.1.0/24 ) #- ALLOWED_SENDER_DOMAINS=${MM3_ALLOWED_SENDER_DOMAINS} # - ALLOW_EMPTY_SENDER_DOMAINS=${MM3_ALLOW_EMPTY_SENDER_DOMAINS} #="true" #'), MM3_ALLOWED_SENDER_DOMAINS can be unset #- MASQUERADED_DOMAINS=${MM3_MASQUERADED_DOMAINS} # = domains where you want to masquerade internal hosts networks: mailman: ipv4_address: ${MM3_IP_INTERNAL_POSTFIX} #172.26.0.5 #services: mailman-core: image: maxking/mailman-core:0.4 # Use a specific version tag (tag latest is not published) container_name: mailman-core hostname: mailman-core restart: unless-stopped volumes: - ./data/core:/opt/mailman/ stop_grace_period: 30s links: - database:database depends_on: database: condition: service_healthy environment: - DATABASE_URL=postgresql://mailman:mailmanpass@database/mailmandb - DATABASE_TYPE=postgres - DATABASE_CLASS=mailman.database.postgresql.PostgreSQLDatabase - HYPERKITTY_API_KEY=${MM3_HYPERKITTY_API_KEY} #someapikey_longAndTrustworty - TIMEZONE=${MM3_TIMEZONE} #Europe/Berlin - MTA=postfix - SMTP_HOST=172.26.0.5 #postfix # outgoing smtp Sererv - SMTP_PORT=25 #${MM3_INTERNAL_POSTFIX_SMTP_PORT} # Outgoing SMTPS Server Port ports: - "8001:8001" # API removed 127.0.0.1 - "8024:8024" # LMTP - incoming emails #extra_hosts: # - ${MM3_HOSTNAME}:${MM3_IP_INTERNAL_POSTFIX} networks: mailman: ipv4_address: ${MM3_IP_INTERNAL_CORE} #172.26.0.2 mailman-web: image: maxking/mailman-web:0.4 # Use a specific version tag (tag latest is not published) container_name: mailman-web hostname: mailman-web restart: unless-stopped depends_on: database: condition: service_healthy links: - mailman-core:mailman-core - database:database volumes: - ./data/web:/opt/mailman-web-data environment: - DATABASE_TYPE=postgres - DATABASE_URL=postgresql://mailman:mailmanpass@database/mailmandb - HAYPERKITTY_API_KEY=${MM3_HYPERKITTY_API_KEY} #someapikey_longAndTrustworty - UWSGI_STATIC_MAP=/static=/opt/mailman-web-data/static - SECRET_KEY=${MM3_SECRET_KEY} #blah-blah-secret_undgehie - SERVE_FROM_DOMAIN=${MM3_SERVE_FROM_DOMAIN} #lists.mydomain.net - MAILMAN_ADMIN_USER=${MM3_MAILMAN_ADMIN_USER} #it - MAILMAN_ADMIN_EMAIL=${MM3_MAILMAN_ADMIN_EMAIL} #it(a)mydomain.net - DJANGO_ALLOWED_HOSTS=${MM3_DJANGO_ALLOWED_HOSTS} #lists.mydomain.net - SMTP_HOST=172.26.0.5 #postfix - SMTP_PORT=25 #${MM3_INTERNAL_POSTFIX_SMTP_PORT} - TIMEZONE=${MM3_TIMEZONE} #Europe/Berlin ports: - "8000:8000" # HTTP removed 127.0.0.1 - "8080:8080" # uwsgi # extra_hosts: # - ${MM3_HOSTNAME}:${MM3_IP_INTERNAL_POSTFIX} networks: mailman: ipv4_address: ${MM3_IP_INTERNAL_WEB} #172.26.0.3 database: environment: - POSTGRES_DB=mailmandb - POSTGRES_USER=mailman - POSTGRES_PASSWORD=mailmanpass - TIMEZONE=${MM3_TIMEZONE} #Europe/Berlin image: postgres:12-alpine volumes: - ./data/database:/var/lib/postgresql/data healthcheck: test: ["CMD-SHELL", "pg_isready --dbname mailmandb --username mailman"] interval: 10s timeout: 5s retries: 5 networks: mailman: ipv4_address: ${MM3_IP_INTERNAL_DB} #172.26.0.4 networks: mailman: driver: bridge ipam: driver: default config: - subnet: ${MM3_SUBNET} #172.26.0.0/24 Mailman-extra.cfg: [mailman] site_owner:mailman@mydomain.de max_recipients=1 SMTP_MAX_RCPTS = 1 run_tasks_every: 1h VERP_CONFIRMATIONS = Yes VERP_PASSWORD_REMINDERS = Yes VERP_PERSONALIZED_DELIVERIES = Yes VERP_DELIVERY_INTERVAL = 1 VERP_PROBES: Yes [devmode] enabled: no recipient:it@mydomain.de # # extra local settings for mailmen [mta] incoming: mailman.mta.postfix.LMTP outgoing: mailman.mta.deliver.deliver lmtp_host: 172.26.0.2 lmtp_port: 8024 smtp_host: 172.26.0.5 smtp_port: 25 #configuration: /etc/postfix-mailman.cfg # # # [logging.smtp] level: warn [language.en] charset: utf-8 [language.de] charset: utf-8 and my settings_locale.py from mailman-web: EMAIL_BACKEND = 'django.core.mail.backends.smtp.EmailBackend' EMAIL_HOST = '172.26.0.5' EMAIL_PORT = 25 USE_SSL = False DEFAULT_FROM_EMAIL ="lists(a)mydomain.net" SERVER_EMAIL ="lists(a)mydomain.net" #DEBUG = True #: Default list of admins who receive the emails from error logging. ADMINS = ( ('Mailman Suite Admin', 'it(a)mydomain.net'), )

3 3

API web hook for subscribe and remove user
by Tibor Molnar Jan. 22, 2025

Jan. 22, 2025

Hi there, I'm looking to find out if there is any way of deleting a user over API and what config needs to be done. Also if I can subscribe user/ users over API to lists. I'm aware that I can remove users in cli mailman shell, so I want to do the same thing over the web. I'm also aware that mailman3 is already query API on localhost and that's how it's generating the output for system information but if I was going to configure it for remote where else other than mailman.cfg do I need to configure this? My current version is: Mailman Core Version GNU Mailman 3.3.8 (Tom Sawyer) Mailman Core API Version 3.1 Related conf in mailman.cfg: [webservice] hostname: localhost port: 8001 use_https: no admin_user: restadmin admin_pass: Thank you for your help

2 2

Mailing list welcome message won't update
by frances.du＠uq.edu.au Jan. 22, 2025

Jan. 22, 2025

Hi there, I have updated the welcome message for a mailing list by directly updating the file at: file:///var/lib/mailman3/templates/lists/[redacted].lists.[redacted].org.au/en/list:user:notice:welcome I then restarted theses services: mailman3, mailman3-web and nginx. But when I test subsribe to the mailing list, the welcome message does not update. GNU Mailman 3.1.1 (Between The Wheels) Postorius Version 1.1.2 Thank you for your help in advance. Frances

3 14

MHonArc archiver setup/config?
by Bryan Fields Jan. 21, 2025

Jan. 21, 2025

I've had a request to setup this for a mm3 list. It looks like it's supported from the config files, but I'm at a loss for exactly how to go about this. Has anyone setup this with mm3 and can provide an overview? Thanks, -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net

2 2

sync_members via email
by kbaumann＠chicagoiww.org Jan. 21, 2025

Jan. 21, 2025

I can use email to get a list of members: To: mylist-request(a)lists.theserver.org Subject: who (password) Any chance that a sync_members could be accomplished in a similar fashion? Looks like it's only available from the console, but I'm asking anyway to be sure. Thanks.

2 1