May 2024 - Mailman-users - lists.mailman3.org

Find a smtp server to send out emails
by Leon March 12, 2025

March 12, 2025

Hi, This problem is not caused by mailman, but I still want to give it a shot here. I'm hosting a mailing list on top of mailman3. Emails are supposed to be sent out by AWS ses. However, ses requires that sender address must be verified, which leads to a problem that emails sent by subscribers to mailing list cannot be sent to other subcirbers, since their addresses are not verified. And it is impossible to verified every subscriber. Are there smtp service providers allowing unverified email address to send out emails, or do I have other solutions? Thanks. -- Best wishes, Leon

4 3

Moderation of held emails vs. spam
by David Krantz March 11, 2025

March 11, 2025

Hi, I now run Mailman 3.3.1, installed from pip. Is there now any way to prevent Mailman from forwarding the contents of the held message when notifying moderators of held messages? In my case these messages often are spam messages and if the entire contents are forwarded it triggers spam handling in the recipient address(es) which over time risks classifying all moderation emails as spam or even classifying the list domain or server as a spam source. Even my own outgoing filter classifies it as spam, which I will fix. I currently run rspamd for spam filtering, graylisting and DKIM and ARC verification/signing. Someone on this recommended it, thank you for that as it removes the need for other milters. I guess that this would be a simple change to make as a kludge but a proper implementation as a setting would be a lot better. I'd like it as a global setting but that might be too coarse. Cheers // David

3 4

Issues with a DMARC record leading to message being shunted
by Ralf Hildebrandt March 4, 2025

March 4, 2025

Hi! Recently a mail was not being distributed via our MM3 instance; I searched the logs and found: Dec 22 04:54:27 2023 (24) ACCEPT: <1d431542-b386-467b-8bf2-305f19ee7eb4(a)somenet.org> Dec 22 04:54:28 2023 (28) Uncaught runner exception: list index out of range Dec 22 04:54:28 2023 (28) Traceback (most recent call last): File "/usr/lib/python3.10/site-packages/mailman/core/runner.py", line 179, in _one_iteration self._process_one_file(msg, msgdata) File "/usr/lib/python3.10/site-packages/mailman/core/runner.py", line 272, in _process_one_file keepqueued = self._dispose(mlist, msg, msgdata) File "/usr/lib/python3.10/site-packages/mailman/runners/pipeline.py", line 37, in _dispose process(mlist, msg, msgdata, pipeline) File "/usr/lib/python3.10/site-packages/mailman/core/pipelines.py", line 53, in process handler.process(mlist, msg, msgdata) File "/usr/lib/python3.10/site-packages/mailman/handlers/validate_authenticity.py", line 125, in process authenticate(msg, msgdata) File "/usr/lib/python3.10/site-packages/mailman/utilities/retry.py", line 44, in f_retry return f(*args, **kwargs) File "/usr/lib/python3.10/site-packages/mailman/handlers/validate_authenticity.py", line 93, in authenticate auth_result = authenticate_message( File "/usr/lib/python3.10/site-packages/authheaders/__init__.py", line 395, in authenticate_message dmarc_result = check_dmarc(msg, spf_result, dkim_result, dnsfunc=dnsfunc, psddmarc=psddmarc) File "/usr/lib/python3.10/site-packages/authheaders/__init__.py", line 343, in check_dmarc result, result_comment, from_domain, policy = dmarc_per_from(from_domain, spf_result, dkim_result, dnsfunc, psddmarc) File "/usr/lib/python3.10/site-packages/authheaders/__init__.py", line 90, in dmarc_per_from record, orgdomain = receiver_record(from_domain) File "/usr/lib/python3.10/site-packages/authheaders/dmarc_lookup.py", line 117, in receiver_record retval = lookup_receiver_record(hostSansDmarc, dnsfunc) File "/usr/lib/python3.10/site-packages/authheaders/dmarc_lookup.py", line 92, in lookup_receiver_record tags = answer_to_dict(str(result)) File "/usr/lib/python3.10/site-packages/authheaders/dmarc_lookup.py", line 42, in answer_to_dict retval = {t[0].strip().lower(): t[1].strip().lower() for t in rawTags} File "/usr/lib/python3.10/site-packages/authheaders/dmarc_lookup.py", line 42, in <dictcomp> retval = {t[0].strip().lower(): t[1].strip().lower() for t in rawTags} IndexError: list index out of range Dec 22 04:54:28 2023 (28) SHUNTING: 1703220868.1418982+b27f5db154375fcd2c418d467172e4aad0d3d57a So the message has been shunted, due to this error. Something with DMARC and tags. So I checked the DMARC record for the sending domain somenet.org. It is "v=DMARC1;p=none;pct=100;rua=mailto:postmaster@somenet.org;mailto:postmaster@somenet.org;ri=3600;fo=1;" which is syntactically incorrect. The extra ";mailto:postmaster@somenet.org" is wrong, I guess the tag "ruf=" is missing here! It should probably read "v=DMARC1;p=none;pct=100;rua=mailto:postmaster@somenet.org;ruf=mailto:postmaster@somenet.org;ri=3600;fo=1;" So, should mm3 somehow "catch" this error somehow? According to the DMARC specs, an syntactically incorrect DMARC record should be ignored / handled as if none were present. -- Ralf Hildebrandt Charité - Universitätsmedizin Berlin Geschäftsbereich IT | Abteilung Netz | Netzwerk-Administration Invalidenstraße 120/121 | D-10115 Berlin Tel. +49 30 450 570 155 ralf.hildebrandt(a)charite.de https://www.charite.de

5 12

How To Install Mailman 3 on Debian 10 (Complete Guide)
by Brian Carpenter Feb. 25, 2025

Feb. 25, 2025

I have finished my how-to install Mailman 3 on Debian 10 completed to the point where you can use it to get a fully functional Mailman 3 environment up and running. This is a comprehensive guide that walks you through installing EVERYTHING (currently!) that Mailman 3 needs to run. It also makes updating Mailman 3/Postorius/Hyperkitty very easy. I have not added the update directions yet but will very soon. I also plan on adding a section on setting up DKIM and Xapian with Mailman 3. I hope this helps those who wish to get a Mailman 3 server up and running quickly and brings a sense of sanity to the confusion regarding the various documentation out there concerning the installation of Mailman 3/Postorius/Hyperkitty. I intend to add a How-to for Ubuntu 20 at some point. Without further ado: https://wiki.list.org/DOC/Howto_Install_Mailman3_On_Debian10 I am sure the above guide can use improvements. Feel free to contact me off-list to point out mistakes/improvements, etc. -- Brian Carpenter Harmonylists.com Emwd.com

13 38

How to remove Held Unsubscriptions
by Mark Jan. 6, 2025

Jan. 6, 2025

Hi As a moderator I receive an email each day for "Held Unsubscriptions" for a subscriber that was unsubscribed by the Owner sometime ago (using "Mass operations"). +++++++++++++++++++++++++++++++ The listname(a)domain.com list has 1 moderation requests waiting. Held Unsubscriptions: User: bart(a)example.com Please attend to this at your earliest convenience. +++++++++++++++++++++++++++++++ There is nothing showing under "Subscription requests > Pending approval". Could anyone tell me how I can stop these email notifications? I have access to the mailman shell and the databases. Thanks, Mark

4 7

Cache mailman3
by pau.baiges＠csuc.cat Dec. 22, 2024

Dec. 22, 2024

Is there a way to delete the mailman3 cache? It's because it gives us this error and we think it's because of the cache. Internal Server Error: /mailman3/accounts/login/ TemplateDoesNotExist at /accounts/login/ django_saml2_auth/error.html Request Method: GET Request URL: http://llistes.csuc.cat/mailman3/accounts/login/?next=/mailman3/postorius/l… Django Version: 2.2.12 Python Executable: /usr/bin/uwsgi-core Python Version: 3.8.10 Python Path: ['.', '', '/usr/lib/python38.zip', '/usr/lib/python3.8', '/usr/lib/python3.8/lib-dynload', '/usr/local/lib/python3.8/dist-packages', '/usr/lib/python3/dist-packages'] Server time: dv., 15 Març 2024 10:33:00 +0100 Installed Applications: ('hyperkitty', 'postorius', 'django_mailman3', 'django.contrib.admin', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.staticfiles', 'rest_framework', 'django_gravatar', 'compressor', 'haystack', 'django_extensions', 'django_q', 'allauth', 'allauth.account', 'allauth.socialaccount', 'django_mailman3.lib.auth.fedora') Installed Middleware: ('django.contrib.sessions.middleware.SessionMiddleware', 'django.middleware.common.CommonMiddleware', 'django.middleware.csrf.CsrfViewMiddleware', 'django.middleware.locale.LocaleMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', 'django.contrib.messages.middleware.MessageMiddleware', 'django.middleware.clickjacking.XFrameOptionsMiddleware', 'django.middleware.security.SecurityMiddleware', 'django_mailman3.middleware.TimezoneMiddleware', 'postorius.middleware.PostoriusMiddleware') Template loader postmortem Django tried loading these templates, in this order: Using engine django: This engine did not provide a list of tried templates. Traceback: File "/usr/local/lib/python3.8/dist-packages/django_saml2_auth/utils.py" in wrapper 179. result = function(request) File "/usr/local/lib/python3.8/dist-packages/django_saml2_auth/views.py" in signin 271. saml_client = get_saml_client(get_assertion_url(request), acs) File "/usr/local/lib/python3.8/dist-packages/django_saml2_auth/saml.py" in get_saml_client 169. metadata = get_metadata(user_id) File "/usr/local/lib/python3.8/dist-packages/django_saml2_auth/saml.py" in get_metadata 131. raise SAMLAuthError("Invalid metadata URL.", extra={ During handling of the above exception (Invalid metadata URL.), another exception occurred: File "/usr/lib/python3/dist-packages/django/core/handlers/exception.py" in inner 34. response = get_response(request) File "/usr/lib/python3/dist-packages/django/core/handlers/base.py" in _get_response 115. response = self.process_exception_by_middleware(e, request) File "/usr/lib/python3/dist-packages/django/core/handlers/base.py" in _get_response 113. response = wrapped_callback(request, *callback_args, **callback_kwargs) File "/usr/local/lib/python3.8/dist-packages/django_saml2_auth/utils.py" in wrapper 181. result = handle_exception(exc, request) File "/usr/local/lib/python3.8/dist-packages/django_saml2_auth/utils.py" in handle_exception 162. return render(request, File "/usr/lib/python3/dist-packages/django/shortcuts.py" in render 36. content = loader.render_to_string(template_name, context, request, using=using) File "/usr/lib/python3/dist-packages/django/template/loader.py" in render_to_string 61. template = get_template(template_name, using=using) File "/usr/lib/python3/dist-packages/django/template/loader.py" in get_template 19. raise TemplateDoesNotExist(template_name, chain=chain) Exception Type: TemplateDoesNotExist at /accounts/login/ Exception Value: django_saml2_auth/error.html Request information: USER: AnonymousUser

3 2

Re: mail stuck in "out" queue
by Dmitry Makovey Dec. 18, 2024

Dec. 18, 2024

So our mailman got stuck again, but I did follow your advise. Here's what I've found: On 3/29/19 2:58 PM, Mark Sapiro wrote: > On 3/29/19 2:28 PM, Dmitry Makovey wrote: >> I've had encountered this situation now twice: mail is being stuck in >> "out" queue and nothing in the logs indicates the issue. Is there a way >> to ask mailman-core politely to attempt delivery (perhaps with increased >> debugging in the logs) *without* restarting the core (which does solve >> *this* problem but creates other problems, like availability of the >> mailman as a whole) > > > Is the "out" runner running? yes: # docker top mailman-core | grep -F out: 100 21681 13215 0 Mar28 ? 01:14:16 /usr/local/bin/python /usr/local/bin/runner --runner=out:0:1 -C /etc/mailman.cfg > ps -fwwA |grep runner=out > > If not, you should be able to start it as the Mailman user with a > command like > > /path/to/python3 /path/to/mailman/bin/runner -C /path/to/mailman.cfg > --runner=out:0:1 > > See 'ps -fwwA|grep runner' for examples > > If the out runner is running, is there a file named *.bak along with all > the *.pck files in queue/out/ there is one, yes: # ls -l /srv/mail/mailman/core/var/queue/out/*.bak -rw-rw---- 1 100 65533 21512 Apr 14 19:45 /srv/mail/mailman/core/var/queue/out/1555296331.8386078+2c905825b82708e5a682b872b0aff320c9dd0b2e.bak what does it indicate and what should my steps be to resolve this (other than restarting queues)? > And if it's not, is there anything in Mailman's logs to indicate why it > died? > > Also, 'mailman restart' should only take a matter of seconds, but if the > out runner is running but not processing its queue, I think sending it a > SIGINT should restart it. SIGINT killed the process allright, but it didn't auto-respawn. I ended up spawning it with: /usr/local/bin/python /usr/local/bin/runner --runner=out:0:1 -C /etc/mailman.cfg but soon realized it doesn't go to background nicely so I've nohup'ed it in the end. but it did solve my problem. -- Sr System and DevOps Engineer SoM IRT

6 17

How to Increase outgoing mail volume for Mailman 3
by Brian Carpenter Dec. 9, 2024

Dec. 9, 2024

Hello everyone, We had a new client come on board that brought a list that had the largest out-going mail volume that I have ever dealt with. So I did what any sane server administrator would do that is running Mailman 3: I ran to Mark Sapiro for help! Here is what the Sage of all things Mailman counseled me to do: 1. Disabled VERP delivery. VERP can help improve mail delivery by delivering 1 message per SMTP transaction (I think I got that right). Using VERP is counter-productive as it can seriously delay outgoing mail delivery for a high-volume list. So you can use something like the following in the MTA section of your mailman.cfg: [mta] verp_confirmations: no verp_personalized_deliveries: no verp_delivery_interval: 0 2. I configured Mailman 3 to run 4 outgoing runners. The default is 1. This action was the game changer. It allows Mailman to handle 4 incoming messages at a time instead of 1. My client's incoming list volume was high enough where it was overwhelming the single outgoing runner. Here is what I added to the mailman.cfg file: [runner.out] instances: 4 Doing this step immediately solved the backlog in var/queue/out. 3. If you start up with a new server for a list that is high volume then keep an eye out for Proofpoint and Vade Security as they will block your new IP address quicker than Mark Sapiro can say "This is a bug. See <some Gitlab.com url>" Mark, thank you! -- Brian Carpenter Harmonylists.com Emwd.com

5 10

Aborted connection message in log in every 5 minutes
by zoltan＠circle-interactive.co.uk Dec. 3, 2024

Dec. 3, 2024

Hi Everyone, we have mailman 3.3.8 venv test installation which in general works fine however our mysql error log is filled up with messages below because they are so frequent. 2023-02-24 0:31:30 199567 [Warning] Aborted connection 199567 to db: 'mailman' user: 'mailman' host: 'localhost' (Got an error reading communication packets) 2023-02-24 0:36:30 201063 [Warning] Aborted connection 201063 to db: 'mailman' user: 'mailman' host: 'localhost' (Got an error reading communication packets) 2023-02-24 0:41:31 202559 [Warning] Aborted connection 202559 to db: 'mailman' user: 'mailman' host: 'localhost' (Got an error reading communication packets) 2023-02-24 0:46:31 204056 [Warning] Aborted connection 204056 to db: 'mailman' user: 'mailman' host: 'localhost' (Got an error reading communication packets) As suggested here https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… I tried to correlate with error logs and /opt/mailman/web/logs/mailmanweb.log shows some hyperkitty.lib.utils Failed to update the fulltext index: (2002, "Can't connect to local MySQL server through socket '/run/mysqld/mysqld.sock' (111)" /opt/mailman/web/logs/uwsgi-error.log Message: OperationalError(2013, "Lost connection to MySQL server at 'handshake: reading initial communication packet', sy stem error: 104") but they have not such frequency so unsure if they are related. Thanks for the suggestions

6 16

Backup and restore a single list
by sherin＠raidm.com Nov. 6, 2024

Nov. 6, 2024

Hello, I am new to mailman3 . I am looking for the procedure to backup and restore a single mailing list from mailman3. If any one know the procedure or the documentation , please point me

3 7

Logging subscribes/unsubscribes
by Brian Carpenter Oct. 22, 2024

Oct. 22, 2024

Does Mailman 3 log subscribes and unsubscribes for each list the way Mailman 2 did? Brian

5 7

Questions regarding message acceptance
by Pawel Grzywaczewski Sept. 19, 2024

Sept. 19, 2024

Hello, I have few questions regarding usage of Mailman3: 1) We have list1 and list2 with members. Can we specify that all members of list1 can post messages to list2? We could potentially write a script that would synchronize members of another list to “Accept these non-members” of another list, but with thousands of lists it will be difficult to maintain lists in synchro. So perhaps there is a concept of adding another list to “Accept these non-members” and mailman real-time evaluate membership of another list upon message arrival? 2) In explanation of “Accept these non-members” it’s written: “While non-regexp addresses can be entered here, it is preferred to add the address as a nonmember and set the nonmember's Moderation to Default Processing”. I noticed that if someone posts to a list then he is added automatically to non-members. Which means that next time he will be able to post. My understanding is that it’s better to use the feature “Accept these non-members”. Am I correct? Thank you, Paweł

5 7

Disabled by bounce
by Allan Hansen Sept. 11, 2024

Sept. 11, 2024

Hi all, Apparently Google just started to get very aggressive about DKIM settings. Some hundreds of my subscribers have had their subscriptions disabled because of Google's bounces. I tried to 'Enable' some of them, expecting that their bounce scores would be reset, but when I list the users, the bounce scores are still 5. Please advise. Will enabling them without the bounce score being reset just cause the server to disable them again. Yours, Allan

10 19

Display the last post time for a list or all lists.
by Henrik Rasmussen Aug. 9, 2024

Aug. 9, 2024

Does Mailman 3 have something similar to https://www.msapiro.net/scripts/last_post.py displaying the last post time for a list or all lists?

3 4

MM3 generates long lines?
by peter＠chubb.wattle.id.au July 28, 2024

July 28, 2024

I'm seeing emails being dropped when mm3 talks to the local smtp server, with log errors like: 2021-06-23 15:42:24 1lvvea-007r8u-VN H=localhost (<FQDN>) [::1] F=<announce-bounces@<FQDN>> rejected after DATA: maximum allowed line length is 998 octets, got 1036 The email itself did not have such long lines AFAICT. I can disable line length checking on the mailserver, but that sounds like a recipe for the next one along to drop the email. Peter C

4 8

Digests not working correctly
by Joel Lord June 8, 2024

June 8, 2024

So I seem to have problems with both periodic AND size-triggered digests. Size first, this is simpler. Just got one sent out, clearly triggered by a new email getting added to the queued up messages, but the setting for the list is the default 30KB and the digest came out at 23.2 KB. Is it measuring the accumulated queue as size on disk including metadata and filesystem block sizes or something, rather than the size of what the emailed digest will be? Periodic is much more complicated, even to explain. I have the cron job running nightly at 11:00 PM and it certainly seems to be working, except for one really odd thing. The list also definitely has periodic digests enabled in the web UI. This is a very bursty list, so it will go mad with traffic for a few weeks and then will go mostly idle for a month or so. The first digest of a burst is definitely size-triggered, but pretty reliably it has the last few messages from the previous burst in there. So the one I got today had three messages from today and one message from May 4th. But that May 4th message should have gone out at 11:00 PM on May 4th with the daily digest and then gotten flushed from the pending digest queue, right? -- Joel Lord

3 14

Trying to save a new style
by Perry Kollmorgen June 7, 2024

June 7, 2024

Dear Mailman-users list, I have embarked on project to stand up a Mailman3 instance for general staff email announcements and a small number of adhoc lists. I have a fair amount up and working using Docker and Postfix, with generally emails to/from lists working well, as well as the web interface. One of the reasons I've used Mailman3 is the API and mailman shell options which I'm slowly trying to wrap my head around, but having some progress. I have a question for the moment on something which has stumped me, and whilst I may have more questions as I continue on this implementation, I am hopeful someone can point out where I am going wrong on this. Welcome to the GNU Mailman shell Use commit() to commit changes. Use abort() to discard changes since the last commit. Exit with ctrl+D does an implicit commit() but exit() does not. >>> from zope.component import getUtility >>> from mailman.interfaces.styles import IStyleManager >>> manager = getUtility(IStyleManager) >>> >>> for style in manager.styles: ... print(style.name) ... legacy-announce legacy-default private-default >>> >>> >>> from zope.interface import implementer >>> from mailman.interfaces.styles import IStyle >>> @implementer(IStyle) ... class TestStyle: ... name = 'AB-Announce-Style' ... description = 'AB Announce mailing list style.' ... def apply(self, mailing_list): ... mailing_list.admin_immed_notify = true ... mailing_list.admin_notify_mchanges = true ... mailing_list.advertised = false ... mailing_list.allow_list_posts = false ... mailing_list.anonymous_list = false ... mailing_list.archive_policy = "private" ... mailing_list.archive_rendering_mode = "markdown" ... mailing_list.collapse_alternatives = false ... mailing_list.convert_html_to_plaintext = false ... mailing_list.default_member_action = "defer" ... mailing_list.default_nonmember_action = "hold" ... mailing_list.digest_send_periodic = false ... mailing_list.digests_enabled = false ... mailing_list.emergency = false ... mailing_list.include_rfc2369_headers = true ... mailing_list.max_message_size = 40000 ... mailing_list.max_num_recipients = 30 ... mailing_list.member_roster_visibility = "moderators" ... mailing_list.send_goodbye_message = true ... mailing_list.send_welcome_message = true ... mailing_list.subscription_policy = "moderate" ... mailing_list.unsubscription_policy = "moderate" ... >>> manager.register(TestStyle()) >>> >>> commit() >>> >>> for style in manager.styles: ... print(style.name) ... AB-Announce-Style legacy-announce legacy-default private-default So at this point the style has been registered, however it doesn't look to save this permanently. When I quit the shell and log back in, it only shows the original 3 styles. Nor can I see the style from the web interface. Welcome to the GNU Mailman shell Use commit() to commit changes. Use abort() to discard changes since the last commit. Exit with ctrl+D does an implicit commit() but exit() does not. >>> from zope.component import getUtility >>> from mailman.interfaces.styles import IStyleManager >>> manager = getUtility(IStyleManager) >>> >>> for style in manager.styles: ... print(style.name) ... legacy-announce legacy-default private-default >>> Is there a way to save this style permanently ? Thank you for any assistance you can provide. Regards, PerryK

3 2

Mailman3 doesn't send Mails to users (Debian12 with Plesk)
by marcus＠mbautze.de June 6, 2024

June 6, 2024

Hello, i already send this question to the plesk-forum but it seems that nobody there can help me :-( After updating from Debian 10 to 11 to 12, I now have mailman3 running on my server I then converted all lists from Mailman2 to Mailman3 following the instructions from mailman. I can access it via the web interface, manage everything etc. When I register on the web interface, I also receive the corresponding mails from Mailman (forgotten password...) Mails are also arriving, at least mails that are not allowed go into the mails to be approved. The problem, however, is that it does not send out any mails, nor do they appear in the archive. When I look in the Mailman-Log I find: May 16 01:44:55 2024 (6833) Cannot connect to SMTP server localhost on port 25 May 16 01:48:15 2024 (61252) error opening connection to nntp_host: localhost [Errno 111] Connection refused May 16 01:48:15 2024 (61252) NNTP error for list vereinsmitglieder(a)ludothek.de: [Errno 111] Connection refused The configuration of Mailman.cfg looks like this: incoming: mailman.mta.postfix.LMTP outgoing: mailman.mta.deliver.deliver smtp_host: localhost smtp_port: 25 smtp_user: smtp_pass: lmtp_host: 127.0.0.1 lmtp_port: 8024 In Mailman manuals I find hints that the transport routes have to be added to the Postfix-config. Doesn't Debian/Plesk do this automatically? Does anyone else have an idea what I need to change to get my mails out? I did the conversion from mailman2 to mailman3 with root because it didn't work with "sudo -u list "m, but the files stored in the file system all belong to list, so that shouldn't be the problem.

9 25

Recently active discussions - Hyperkitty
by Sam Darwin June 4, 2024

June 4, 2024

Hi, Sometimes not sure if it's preferable to open a gitlab issue, or chat on the mailing list. I have run a large archive import into mailman3/hyperkitty. After that's done, waited a day, for scheduled cron jobs to complete. In "All Threads", all the email archives are present. The import worked. In "RECENTLY ACTIVE DISCUSSIONS" on the main page, it says: RECENTLY ACTIVE DISCUSSIONS No discussions this month (yet). Nothing there. That means if I direct users to visit the site, the page, it appears empty. That's too bad. :-) It should display recent emails. What would affect this feature during an archive import? Is it a problem with the import script itself, or with a scheduled cron job, or something else? Would you expect "Recently active discussions" be empty when very recent archives do exist? Thanks, Sam

3 7

Mailman sending email from user@example.com
by dgoldsmith＠sans.org May 30, 2024

May 30, 2024

I have defined an additional SITE in django and the SITE_ID value in /etc/mailman3/settings.py is set to reference that site's ID value. Messages for a list being distributed that are generating certain bounce errors are resulting in email from Mailman 3.x being sent to the list owners from the address user(a)example.com. Is there something else to update in the settings files, Django or the database to make it use the list owner email address tied to the domain of the site? Thanks, David Goldsmith

1 1

Have postgresql in the mailman.cfg file but sqlite shows in the mailman info command
by Keith Christian May 29, 2024

May 29, 2024

(venv) [mailman3@localhost-live ~]$ mailman info GNU Mailman 3.3.9 (Tom Sawyer) Python 3.9.18 (main, Jan 24 2024, 00:00:00) [GCC 11.4.1 20231218 (Red Hat 11.4.1-3)] config file: /opt/mailman3/mailman.cfg db url: sqlite:////opt/mailman3/var/data/mailman.db <<<---------------------------------------- devmode: DISABLED REST root url: http://localhost:8001/3.1/ REST credentials: restadmin:restpass Class and url were commented out in the mailman.cfg file, did not recognize postgresql but generated a trace (venv) [mailman3@localhost-live ~]$ grep postgresql /opt/mailman3/mailman.cfg # class: mailman.database.postgresql.PostgreSQLDatabase # url: postgresql://mailman:MYPASSWORD@localhost/mailman Uncommented class and url: class: mailman.database.postgresql.PostgreSQLDatabase <<<---------------------------------------- url: postgresql://mailman:MYPASSWORD@localhost/mailman <<<---------------------------------------- Now I get a stack trace from "mailman info" (venv) [mailman3@localhost-live ~]$ mailman info Traceback (most recent call last): File "/opt/mailman3/venv/bin/mailman", line 33, in <module> sys.exit(load_entry_point('mailman==3.3.9', 'console_scripts', 'mailman')()) File "/opt/mailman3/venv/lib64/python3.9/site-packages/click/core.py", line 1157, in __call__ return self.main(*args, **kwargs) File "/opt/mailman3/venv/lib64/python3.9/site-packages/click/core.py", line 1077, in main with self.make_context(prog_name, args, **extra) as ctx: File "/opt/mailman3/venv/lib64/python3.9/site-packages/click/core.py", line 943, in make_context self.parse_args(ctx, args) File "/opt/mailman3/venv/lib64/python3.9/site-packages/click/core.py", line 1644, in parse_args rest = super().parse_args(ctx, args) File "/opt/mailman3/venv/lib64/python3.9/site-packages/click/core.py", line 1408, in parse_args value, args = param.handle_parse_result(ctx, opts, args) File "/opt/mailman3/venv/lib64/python3.9/site-packages/click/core.py", line 2400, in handle_parse_result value = self.process_value(ctx, value) File "/opt/mailman3/venv/lib64/python3.9/site-packages/click/core.py", line 2362, in process_value value = self.callback(ctx, self, value) File "/opt/mailman3/venv/lib64/python3.9/site-packages/mailman/bin/mailman.py", line 95, in initialize_config initialize(value) File "/opt/mailman3/venv/lib64/python3.9/site-packages/mailman/core/initialize.py", line 228, in initialize initialize_1(config_path) File "/opt/mailman3/venv/lib64/python3.9/site-packages/mailman/core/initialize.py", line 122, in initialize_1 mailman.config.config.load(config_path) File "/opt/mailman3/venv/lib64/python3.9/site-packages/mailman/config/config.py", line 145, in load self.push(filename, user_config.read()) File "/opt/mailman3/venv/lib64/python3.9/site-packages/mailman/config/config.py", line 150, in push self._config.push(config_name, config_string) File "/opt/mailman3/venv/lib64/python3.9/site-packages/lazr/config/_config.py", line 582, in push confs = self._getExtendedConfs(conf_name, conf_data) File "/opt/mailman3/venv/lib64/python3.9/site-packages/lazr/config/_config.py", line 615, in _getExtendedConfs _parser_read_file(parser, StringIO(conf_data), conf_filename) File "/opt/mailman3/venv/lib64/python3.9/site-packages/lazr/config/_config.py", line 49, in _parser_read_file parser.read_file(f, source) File "/usr/lib64/python3.9/configparser.py", line 718, in read_file self._read(f, source) File "/usr/lib64/python3.9/configparser.py", line 1085, in _read raise MissingSectionHeaderError(fpname, lineno, line) configparser.MissingSectionHeaderError: File contains no section headers. file: '/opt/mailman3/mailman.cfg', line: 14 <<<---------------------------------------- 'class: mailman.database.postgresql.PostgreSQLDatabase\n' Here is the complete mailman.cfg file: 1 # /etc/mailman3/mailman.cfg 2 # [paths.here] 3 # var_dir: /opt/mailman/mm/var 4 # 5 # [mailman] 6 # layout: here 7 # # This address is the "site owner" address. Certain messages which must be 8 # # delivered to a human, but which can't be delivered to a list owner (e.g. a 9 # # bounce from a list owner), will be sent to this address. It should point to 10 # # a human. 11 # site_owner: user(a)example.com 12 # 13 # [database] 14 # class: mailman.database.postgresql.PostgreSQLDatabase 15 # url: postgresql://mailman:MYPASSWORD@localhost/mailman 16 # 17 # [archiver.prototype] 18 # enable: yes 19 # 20 # # For the HyperKitty archiver. 21 # [archiver.hyperkitty] 22 # class: mailman_hyperkitty.Archiver 23 # enable: yes 24 # configuration: /etc/mailman3/mailman-hyperkitty.cfg 25 # 26 # [shell] 27 # history_file: $var_dir/history.py 28 # 29 # [mta] 30 # verp_confirmations: yes 31 # verp_personalized_deliveries: yes 32 # verp_delivery_interval: 1 33 # Ideas? Thanks.

3 2

Django administration - User permissions
by advorkin＠cs.princeton.edu May 29, 2024

May 29, 2024

Hello, I'm trying to setup users with different permissions. For example: I created a group support with an ability to hyperkitty/mailing list/Can add/change/delete/view mailing list. Unfortunately, the user still does not have an ability to create mailing lists as the option does not exist. It does work when the user is set as "Superuser status". I've also tried giving every possible "available user permissions", but it didn't make a difference. Am I missing something? Thank you!

2 4

Installing Mailman3 under a Python Virtual environment running on RHEL9
by Andy Macheta May 29, 2024

May 29, 2024

Hi, So tried, without much success, to get Postorius working on my Mailman3 server and every internet trick& tip I tried did not work so decided to take a new approach as recommended at https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… Used this reference: https://docs.mailman3.org/en/latest/install/virtualenv.html#installing-depe… which I know is more for Debian/Ubuntu systems but I was hoping that 90%+ would also work with Red Hat. Fell at the first hurdle with no packages available called "python3-dev" or "python3-venv" Is there anyone that has managed to install a running version of Mailman3 that has a working GUI whether it is on bare metal or Python virtual environment and if so, could they kindly let me know how they did it?? The closest I've come is a running command line version of Mailman3 which is fine for me of course but not for anyone else as they like access via web browser. Thanks in advance, Andy Macheta

4 13

Circumstances in which a subscriber is added to Pending Confirmation list
by David Owen May 28, 2024

May 28, 2024

Hi I wondered if anybody would be able to assist me in my understanding of the Pending Confirmation list, please. In our Mailman mailing list, our Member Policy settings for both Subscription Policy and Un-subscription Policy are set to Open. Therefore we don't require subscribers to confirm their subscription after they submit a request to join our mailing list. Despite this, a number of subscribers seem to be arriving in the Pending Confirmation (Subscriptions pending user confirmation) list. Others correctly arrive in the Members list, as we would expect. All subscription requests are made by the subscriber sending an email to our "join" email address with the subject "subscribe". I've looked at the settings carefully and can't seem to see any that may cause the above behaviour at any time (although I may have missed something of course). Therefore, does anybody know the circumstances in which subscribers to an open mailing list may somehow arrive in the Pending Confirmation list? If I could understand the cause(s) I could then consider ways to manage it or prevent it from happening. Our Mailman installation is hosted centrally in a large organisation so we while we can alter our mailing list's settings in Postorious, we can't alter the source code or similar, so we don't have great room for manoeuvre. Our Postorius version is 1.3.6. Thanks and regards David

1 0

FYI: "RuntimeError: command failure: /usr/sbin/postmap /opt/mailman/mm/var/data/postfix_lmtp, 1, Operation not permitted"
by Nils May 27, 2024

May 27, 2024

After mailman was running so well I was wondering if I really need the restart option in the service configuration. When I commented it out, I got this error a few weeks later: > # systemctl status mailman3 > × mailman3.service - GNU Mailing List Manager > Loaded: loaded (/etc/systemd/system/mailman3.service; enabled; > vendor preset: enabled) > Active: failed (Result: exit-code) since Tue 2024-05-14 00:34:37 > CEST; 1 week 6 days ago > Process: 1159 ExecStart=/opt/mailman/venv/bin/mailman start > (code=exited, status=1/FAILURE) > CPU: 6.933s > > May 14 00:34:36 SERVER.TLD mailman[1159]: return > f(get_current_context(), *args, **kwargs) > May 14 00:34:36 SERVER.TLD mailman[1159]: File > "/opt/mailman/venv/lib/python3.10/site-packages/mailman/commands/cli_control.py", > line 109, in start > May 14 00:34:36 SERVER.TLD mailman[1159]: > call_name(config.mta.incoming).regenerate() > May 14 00:34:36 SERVER.TLD mailman[1159]: File > "/opt/mailman/venv/lib/python3.10/site-packages/mailman/mta/postfix.py", > line 136, in regenerate > May 14 00:34:36 SERVER.TLD mailman[1159]: raise > RuntimeError(NL.join(errors)) > May 14 00:34:36 SERVER.TLD mailman[1159]: RuntimeError: command > failure: /usr/sbin/postmap /opt/mailman/mm/var/data/postfix_lmtp, 1, > Operation not permitted > May 14 00:34:36 SERVER.TLD systemd[1]: mailman3.service: Control > process exited, code=exited, status=1/FAILURE > May 14 00:34:37 SERVER.TLD systemd[1]: mailman3.service: Failed with > result 'exit-code'. > May 14 00:34:37 SERVER.TLD systemd[1]: Failed to start GNU Mailing > List Manager. > May 14 00:34:37 SERVER.TLD systemd[1]: mailman3.service: Consumed > 6.933s CPU time. I can only guess that the error might be some case of very bad timing, because there shouldn't be any problem with the mentioned call. > # su mailman > (venv) mailman@SERVER:/$ /usr/sbin/postmap > /opt/mailman/mm/var/data/postfix_lmtp Usually works fine. I re-enabled the lines in the server configuration: > Restart=on-failure > RestartSec=15

1 0