June 2023 - Mailman-users - lists.mailman3.org

Digests not working correctly
by Joel Lord June 8, 2024

June 8, 2024

So I seem to have problems with both periodic AND size-triggered digests. Size first, this is simpler. Just got one sent out, clearly triggered by a new email getting added to the queued up messages, but the setting for the list is the default 30KB and the digest came out at 23.2 KB. Is it measuring the accumulated queue as size on disk including metadata and filesystem block sizes or something, rather than the size of what the emailed digest will be? Periodic is much more complicated, even to explain. I have the cron job running nightly at 11:00 PM and it certainly seems to be working, except for one really odd thing. The list also definitely has periodic digests enabled in the web UI. This is a very bursty list, so it will go mad with traffic for a few weeks and then will go mostly idle for a month or so. The first digest of a burst is definitely size-triggered, but pretty reliably it has the last few messages from the previous burst in there. So the one I got today had three messages from today and one message from May 4th. But that May 4th message should have gone out at 11:00 PM on May 4th with the daily digest and then gotten flushed from the pending digest queue, right? -- Joel Lord

3 14

Change config to create a new list with all archives off
by Tibor Molnar April 21, 2024

April 21, 2024

Can archiving be changed anywhere in mailman3 configs, so then all new lists created do not archive by default?

5 8

Mailman 3 hosting query
by Bill Robertson April 18, 2024

April 18, 2024

Hi I'm investigating the possibility of transferring a fairly small mailing list I own from Google Groups to MM3 via a hosting service. I'd appreciate any pointers regarding what I should be looking out for with companies that offer this service It also seems very hard to find out which hosting companies are worth considering (In particular, reliability and support are important) Any help much is much appreciated Thanks

4 5

mailman3 digest sending questions and also adding docker to the mix
by bob B April 17, 2024

April 17, 2024

So I have been down the digest rabbit hole. So to confirm my assumptions/findings: Digest size threshold---- means when the total size of held messages hits this setting, a digest is sent Digest Volume Frequency. ---- specifies when the digest volume number gets incremented for digest messages, IT DOES NOT send out digests based on the setting, daily, weekly ... So what does the GUI setting "Send Digest Periodically yes no" do? how periodically does it send digests, if this is set to yes? If I want to send a digest out for a list every day, or every week, how do I set that, especially in the docker environment? Is this something that can be configured in the GUI and configured by each of my list admins? I found that ”'mailman digests --periodic' via cron” should be set in googling, but does that mean I have to do a cron job for any list that wants a scheduled digest sent? My use case is, that I have a list admin who set a size threshold, but regardless of that, they also want their list digest sent out daily, they thought it was the "Digest Volume Frequency" setting but that is not correct. However in their testing they are not getting daily digest, they are getting digests only when the threshold is reached, BUT they have "Send Digest Periodically" set to "yes" and "Enable Digests" is set to "yes"

7 17

hyperkitty.lib.utils Failed to update the fulltext index
by Ben Harris April 13, 2024

April 13, 2024

hello there, i migrated to a new host last night and i've been getting this error from a cronjob mail every minute. anyone have any ideas what would cause this? ERROR 2019-04-17 14:26:33,056 27205 hyperkitty.lib.utils Failed to update the fulltext index: ord() expected a character, but string of length 0 found Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/hyperkitty/lib/utils.py", line 186, in run_with_lock fn(*args, **kwargs) File "/usr/lib/python2.7/dist-packages/hyperkitty/search_indexes.py", line 87, in update_index update_cmd.update_backend("hyperkitty", "default") File "/usr/lib/python2.7/dist-packages/haystack/management/commands/update_index.py", line 276, in update_backend last_max_pk=max_pk) File "/usr/lib/python2.7/dist-packages/haystack/management/commands/update_index.py", line 97, in do_update backend.update(index, current_qs, commit=commit) File "/usr/lib/python2.7/dist-packages/haystack/backends/whoosh_backend.py", line 178, in update self.setup() File "/usr/lib/python2.7/dist-packages/haystack/backends/whoosh_backend.py", line 126, in setup self.index = self.storage.open_index(schema=self.schema) File "/usr/lib/python2.7/dist-packages/whoosh/filedb/filestore.py", line 176, in open_index return indexclass(self, schema=schema, indexname=indexname) File "/usr/lib/python2.7/dist-packages/whoosh/index.py", line 421, in __init__ TOC.read(self.storage, self.indexname, schema=self._schema) File "/usr/lib/python2.7/dist-packages/whoosh/index.py", line 632, in read check_size("int", _INT_SIZE) File "/usr/lib/python2.7/dist-packages/whoosh/index.py", line 626, in check_size sz = stream.read_varint() File "/usr/lib/python2.7/dist-packages/whoosh/filedb/structfile.py", line 191, in read_varint return read_varint(self.read) File "/usr/lib/python2.7/dist-packages/whoosh/util/varints.py", line 102, in read_varint b = ord(readfn(1)) thanks, ben

5 8

Splitting hosts: mta&core vs postorius
by Ruth Ivimey-Cook Jan. 18, 2024

Jan. 18, 2024

I'm trying to set up mailman3 on two hosts, one of which runs core + exim, the other runs postorius (&possibly hyperkitty). I have I think got core set up correctly, and postorius is sort of usable, but anything in the web ui that talks to core ends up with a white screen. I think what is happening is a postorius URL ends up with the core (or perhaps no) hostname, and as there's nothing there to answer it fails. I've checked the settings and I don't think I have misconfigured postorius. Is it possible that the bad url is being passed from core to postorius in some way and reused without changing the host? In the config at present, both hosts are visible to the browser, and each host can communicate with the other. Any ideas on how to pin down the problem better? Ruth

6 31

how to migrate mailing lists to a new domain using mailman 3
by C. Souza Jan. 18, 2024

Jan. 18, 2024

In a few days my current domain will be disabled (it is out of my control) and I would like to know how to migrate the mailing lists to the new domain name. As a solution I added a new domain in mailman 3 and created a script that replicates the lists in this new domain. To forward the emails received by the old lists, the script removes the members and adds the email of the new list. Is there a fashionable way to do that? Also, one problem that I don't have a solution is the archive of the old lists. How to bring them to the new ones? Thanks for your help. My mailing list server is running on a CenOS-7x with postgreSQL and the following mailman packages: Package Version ------------------- ---------- 1 aiosmtpd 1.2.4 2 alembic 1.5.3 3 arrow 0.17.0 4 asgiref 3.3.1 5 atpublic 2.1.2 6 authheaders 0.13.0 7 authres 1.2.0 8 bleach 3.3.0 9 blessed 1.17.12 10 certifi 2020.12.5 11 cffi 1.14.4 12 chardet 4.0.0 13 click 7.1.2 14 cmarkgfm 0.5.2 15 cryptography 3.3.1 16 decorator 4.4.2 17 defusedxml 0.6.0 18 Django 3.0.12 19 django-allauth 0.44.0 20 django-appconf 1.0.4 21 django-compressor 2.4 22 django-extensions 3.1.0 23 django-gravatar2 1.4.4 24 django-haystack 3.0 25 django-mailman3 1.3.5 26 django-picklefield 3.0.1 27 django-q 1.3.4 28 djangorestframework 3.12.2 29 dkimpy 1.0.5 30 dnspython 2.1.0 31 docutils 0.16 32 falcon 2.0.0 33 flufl.bounce 3.0.1 34 flufl.i18n 2.0.2 35 flufl.lock 3.2 36 gunicorn 20.0.4 37 HyperKitty 1.3.3 38 idna 2.10 39 importlib-resources 5.1.0 40 lazr.config 2.2.3 41 lazr.delegates 2.0.4 42 mailman 3.3.2 43 mailman-hyperkitty 1.1.0 44 mailman-web 0.0.3 45 mailmanclient 3.3.2 46 Mako 1.1.4 47 MarkupSafe 1.1.1 48 networkx 2.5 49 nose 1.3.7 50 oauthlib 3.1.0 51 packaging 20.9 52 passlib 1.7.4 53 pip 21.0.1 54 postorius 1.3.3 55 psycopg2-binary 2.8.6 56 publicsuffix2 2.20191221 57 pycparser 2.20 58 Pygments 2.7.4 59 PyJWT 2.0.1 60 pyparsing 2.4.7 61 python-dateutil 2.8.1 62 python-editor 1.0.4 63 python3-openid 3.2.0 64 pytz 2021.1 65 rcssmin 1.0.6 66 readme-renderer 28.0 67 requests 2.25.1 68 requests-oauthlib 1.3.0 69 rjsmin 1.1.0 70 robot-detection 0.4 71 setuptools 39.2.0 72 six 1.15.0 73 SQLAlchemy 1.3.23 74 sqlparse 0.4.1 75 typing-extensions 3.7.4.3 76 urllib3 1.26.3 77 uWSGI 2.0.19.1 78 wcwidth 0.2.5 79 webencodings 0.5.1 80 wheel 0.36.2 81 Whoosh 2.7.4 82 zipp 3.4.0 83 zope.component 4.6.2 84 zope.configuration 4.4.0 85 zope.deferredimport 4.3.1 86 zope.deprecation 4.4.0 87 zope.event 4.5.0 88 zope.hookable 5.0.1 89 zope.i18nmessageid 5.0.1 90 zope.interface 5.2.0 91 zope.proxy 4.3.5 92 zope.schema 6.0.1 -- Carlos Souza

2 1

Loops back to myself
by David Krantz Jan. 12, 2024

Jan. 12, 2024

Hi, I have a problem with my Mailman 3-setup. The symptom is that postfix rejects non-existing addresses for my list domains with <adr(a)example.com>: mail for example.com loops back to myself What I guess happens happens is that postfix for some reason accepts the mail as it is for a relay domain and finds that it is not deliverable locally as the address does not exist locally and then tries to relay it on to the appropriate MX server, which is itself and then fails and generates a bounce message. This is a bit annoying as I have set up postfix to only accept valid addresses. I have set the transport_maps, local_recipient_maps and relay_domains to the files generated by MM3. I run an older version of MM3 (3.0) but prefer to fix this without upgrading as upgrading is a relatively big undertaking. This is mostly a backscatter problem for spam I guess. Any ideas of very simple and easy to forget things that I've probably missed? Cheers // David

5 6

Archive import fails: "IndexError: list index out of range"
by Johannes Rohr Jan. 6, 2024

Jan. 6, 2024

I am now importing the archives of my old mailman2 installation. Unfortunately, with some of the larger and older lists, import fails halfway through, with an exception, the last message of which is IndexError: list index out of range Below is an example. This means that the last few years are missing from the archive in several lists. Are there any suggestions what I could do to still get them importet? Thanks! Johannes File "/usr/lib/python3.8/email/_header_value_parser.py", line 2069, in get_msg_id token, value = get_dot_atom_text(value) File "/usr/lib/python3.8/email/_header_value_parser.py", line 1334, in get_dot_atom_text raise errors.HeaderParseError("expected atom at a start of " email.errors.HeaderParseError: expected atom at a start of dot-atom-text but found '@localhost>' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/opt/mailman/venv/bin/mailman-web", line 8, in <module> sys.exit(main()) File "/opt/mailman/venv/lib/python3.8/site-packages/mailman_web/manage.py", line 37, in main execute_from_command_line(sys.argv) File "/opt/mailman/venv/lib/python3.8/site-packages/django/core/management/__init__.py", line 446, in execute_from_command_line utility.execute() File "/opt/mailman/venv/lib/python3.8/site-packages/django/core/management/__init__.py", line 440, in execute self.fetch_command(subcommand).run_from_argv(self.argv) File "/opt/mailman/venv/lib/python3.8/site-packages/django/core/management/base.py", line 402, in run_from_argv self.execute(*args, **cmd_options) File "/opt/mailman/venv/lib/python3.8/site-packages/django/core/management/base.py", line 448, in execute output = self.handle(*args, **options) File "/opt/mailman/venv/lib/python3.8/site-packages/hyperkitty/management/commands/hyperkitty_import.py", line 387, in handle importer.from_mbox(mbfile, report_name) File "/opt/mailman/venv/lib/python3.8/site-packages/hyperkitty/management/commands/hyperkitty_import.py", line 212, in from_mbox progress_marker.tick(unquote(message.get("message-id", 'n/a'))) File "/usr/lib/python3.8/email/message.py", line 471, in get return self.policy.header_fetch_parse(k, v) File "/usr/lib/python3.8/email/policy.py", line 163, in header_fetch_parse return self.header_factory(name, value) File "/usr/lib/python3.8/email/headerregistry.py", line 607, in __call__ return self[name](name, value) File "/usr/lib/python3.8/email/headerregistry.py", line 202, in __new__ cls.parse(value, kwds) File "/usr/lib/python3.8/email/headerregistry.py", line 535, in parse kwds['parse_tree'] = parse_tree = cls.value_parser(value) File "/usr/lib/python3.8/email/_header_value_parser.py", line 2126, in parse_message_id token, value = get_msg_id(value) File "/usr/lib/python3.8/email/_header_value_parser.py", line 2073, in get_msg_id token, value = get_obs_local_part(value) File "/usr/lib/python3.8/email/_header_value_parser.py", line 1516, in get_obs_local_part if (obs_local_part[0].token_type == 'dot' or IndexError: list index out of range

6 10

Re: [Mailman-Developers] Re: SSL error while connecting to hyperkitty
by Abhilash Raj Nov. 29, 2023

Nov. 29, 2023

On Sat, Aug 31, 2019, at 10:20 AM, sandeep kumar wrote: > Hi Abhilash > > Thanks for the reply. > > Just two more answers please -:) > > Can I use the sample apache.conf in example_project in my webserver virtual host...?? See this thread for the apache configuration: https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… You'd need to adjust the paths and SSL configuration. > > And what should be the configuration details to be given in uwsgi server...?? http://docs.mailman3.org/en/latest/prodsetup.html#setting-up-a-wsgi-server > > Regards > Sandeep > > > On Sat, Aug 31, 2019 at 10:25 PM Abhilash Raj <maxking(a)asynchronous.in> wrote: >> __ >> On Sat, Aug 31, 2019, at 8:49 AM, sandeep kumar wrote: >>> Hi Abhilash >>> >>> Thanks for your reply. -:) >>> >>> We are using apache httpd as webserver to redirect. >>> >>> the proxy pass in webserver is >>> >>> ProxyPass / http://localhost:8000 >>> ReverseProxyPass / http://localhost:8000 >> >> >> Can you put `base_url: http://localhost:8000/hyperkitty` in your mailman-hyperkitty.cfg and see that it works? :) >> >> This should not try any funny SSL redirection. >> >>> I don't have idea of deploying this in production, so I just went on searching and I found wsgi (say uwsgi) is required to send the requests from webserver to mailman. Correct me if I am wrong. >>> >>> I have few queries listed below. Please reply to them. >>> >>> Should I use the wsgi.py present in the directory of mailman-suite ...?? >> >> Yes, that is the one which is supposed to be used. >> >>> >>> What should be the ProxyPass ..?? Where should the first hit go from webserver ---> uwsgi ---> ?? >> >> uwsgi is web server running Mailman's web componenet. It doesn't need to hit anything. You can restart it directly when you want to restart Mailman's web component, you don't need to do anything to your web server (httpd) for this. >> >> >> >>> >>> Can we run "python manage.py runserver" every time to start mailman suite..?? Can we make mailman-suite start/stop just by restarting the HTTPD..?? >> >> >> No, use a wsgi server, like uwsgi or gunicorn to run mailman-suote. `python manage.runserver` is a command used during development shouldn't be used at all in prod. >> >>> >>> What should be the entry in Hyperkitty.cfg file after all the above steps..?? I mean at the end >>> >>> Please reply to the above queries. Thanks for your help >>> Regards >>> Sandeep >>> >>> >>> >>> >>> >>> On Sat, Aug 31, 2019 at 8:45 PM Abhilash Raj <maxking(a)asynchronous.in> wrote: >>>> On Sat, Aug 31, 2019, at 1:36 AM, sandeep kumar wrote: >>>> > Hi Team >>>> > >>>> > Iam seeing following errors while mailman is trying to archive in >>>> > mailman.log >>>> > >>>> > >>>> > This is my base URL in mailman-hyperkitty.cfg >>>> > >>>> > base_url: http://localhost/hyperkitty >>>> >>>> Are you sure this is the URL? this is http and Mailman shouldn't try to connect to this using HTTPS. >>>> >>>> Is your web server configured to redirect all HTTP traffic to HTTPS? If that is the case, then it is going to fail. >>>> >>>> Which wsgi server are you using? uwsgi? >>>> >>>> Can you also show your ProxyPass configuration? >>>> >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > *During handling of the above exception, another exception >>>> > occurred:Traceback (most recent call last): File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/adapters.py", >>>> > line 449, in send timeout=timeout File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/urllib3-1.24.1-py3.6.egg/urllib3/connectionpool.py", >>>> > line 638, in urlopen _stacktrace=sys.exc_info()[2]) File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/urllib3-1.24.1-py3.6.egg/urllib3/util/retry.py", >>>> > line 398, in increment raise MaxRetryError(_pool, url, error or >>>> > ResponseError(cause))urllib3.exceptions.MaxRetryError: >>>> > HTTPSConnectionPool(host='domain.com <http://domain.com>', port=443): >>>> > Max >>>> > retries exceeded with url: >>>> > /hyperkitty/api/mailman/archive?key=SecretArchiverAPIKey (Caused by >>>> > SSLError(SSLError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate >>>> > verify >>>> > failed (_ssl.c:841)'),))During handling of the above exception, another >>>> > exception occurred:Traceback (most recent call last): File >>>> > "/var/lib/mailman/mailman-hyperkitty/mailman_hyperkitty/__init__.py", >>>> > line >>>> > 154, in _archive_message url = self._send_message(mlist, msg) File >>>> > "/var/lib/mailman/mailman-hyperkitty/mailman_hyperkitty/__init__.py", >>>> > line >>>> > 201, in _send_message files={"message": ("message.txt", >>>> > message_text)}) >>>> > File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/api.py", >>>> > line 116, in post return request('post', url, data=data, json=json, >>>> > **kwargs) File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/api.py", >>>> > line 60, in request return session.request(method=method, url=url, >>>> > **kwargs) File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/sessions.py", >>>> > line 533, in request resp = self.send(prep, **send_kwargs) File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/sessions.py", >>>> > line 668, in send history = [resp for resp in gen] if allow_redirects >>>> > else [] File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/sessions.py", >>>> > line 668, in <listcomp> history = [resp for resp in gen] if >>>> > allow_redirects else [] File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/sessions.py", >>>> > line 247, in resolve_redirects **adapter_kwargs File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/sessions.py", >>>> > line 646, in send r = adapter.send(request, **kwargs) File >>>> > "/var/lib/mailman/venv3/lib64/python3.6/site-packages/requests-2.21.0-py3.6.egg/requests/adapters.py", >>>> > line 514, in send raise SSLError(e, >>>> > request=request)requests.exceptions.SSLError: >>>> > HTTPSConnectionPool(host=domain.com <http://domain.com>', port=443): Max >>>> > retries exceeded with url: >>>> > /hyperkitty/api/mailman/archive?key=SecretArchiverAPIKey (Caused by >>>> > SSLError(SSLError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate >>>> > verify >>>> > failed (_ssl.c:841)'),))* >>>> > >>>> > >>>> > Rgrds >>>> > Sandeep >>>> > >>>> > On Sat, Aug 31, 2019 at 10:20 AM sandeep kumar <sandeep7790(a)gmail.com> >>>> > wrote: >>>> > >>>> > > Team any help >>>> > > >>>> > > Sent from my iPhone >>>> > > >>>> > > > On 30-Aug-2019, at 11:18 PM, sandeep kumar <sandeep7790(a)gmail.com> >>>> > > wrote: >>>> > > > >>>> > > > Hi Team >>>> > > > >>>> > > > Iam using httpd to work with ssl on mailman 3 using proxy pass. >>>> > > > >>>> > > > After this configuration Iam not able to connect to hyperkitty. It is >>>> > > throwing ssl certificate error in mailman.log file. >>>> > > > >>>> > > > What should be the configuration of hyperkitty while using https in >>>> > > mailman..? >>>> > > > >>>> > > > Please help me with this Iam struck here from past 4 days >>>> > > > >>>> > > > Rgrds >>>> > > > Sandeep >>>> > > > >>>> > > > Sent from my iPhone >>>> > > >>>> > >>>> > >>>> > -- >>>> > Regards >>>> > Sandeep Kumar >>>> > +91-9642669192 >>>> > _______________________________________________ >>>> > Mailman-Developers mailing list -- mailman-developers(a)python.org >>>> > To unsubscribe send an email to mailman-developers-leave(a)python.org >>>> > https://mail.python.org/mailman3/lists/mailman-developers.python.org/ >>>> > Mailman FAQ: https://wiki.list.org/x/AgA3 >>>> > >>>> > Security Policy: https://wiki.list.org/x/QIA9 >>>> > >>>> >>>> -- >>>> thanks, >>>> Abhilash Raj (maxking) >>> >>> >>> -- >>> Regards >>> Sandeep Kumar >>> +91-9642669192 >>> >> >> -- >> thanks, >> Abhilash Raj (maxking) >> >> > > > -- > Regards > Sandeep Kumar > +91-9642669192 > -- thanks, Abhilash Raj (maxking)

4 3