January 2022 - Mailman-users - lists.mailman3.org

django request error
by tibor.molnar＠waltoninstitute.ie 26 Jan '22

26 Jan '22

I recently got postorius web interface stopped with an error, from web log: WARNING 2021-09-29 14:46:47,071 39320 django.request Not Found: /mailman//postorius/lists/ from website: This page either doesn't exist, or it moved somewhere else. I wonder what would be the source of this error / anyone else experienced this error since I haven't changed anything. Regards, Tibor

5 12

Held messages: Long time waiating for response of the Mailman API
by Stephan Krinetzki 25 Jan '22

25 Jan '22

Hello, We are using Mailman 3.3.5 with Hyperkitty 1.3.5. Mailman 3 is installed in a venv and deployed using Apache and uwsgi. This works quite well so far, only withheld messages cause us a problem: If we try to approve them via Postorius, the message is delivered to the list immediately, but the success message in Postorius takes a long time - on average the process hangs for three minutes until the message is no longer displayed. We have already adjusted the timeout in gunicorn.cfg, but this does not improve the situation. Are there any tips on how we can speed up the REST API? Or is it even a configuration error? Greetings Stephan

2 3

Re: Hyperkitty 403 Forbidden Error
by Josef Dietl 23 Jan '22

23 Jan '22

Dear all, Sorry for coming back to a topic that seems to be done for 18 months now. I'm staring at this issue for a few days now (on and off). But I still get these messages: Jan 19 22:43:27 2022 (149439) HyperKitty failure on https://lists.[...]/hyperkitty/api/mailman/urls: <html><title>Forbidden</title><body> <h1>Access is forbidden</h1><p>Please check the IP addresses assigned to MAILMAN_ARCHIVER_FROM in the settings file. </p></body></html> (403) . and consequently, nothing ends up in the archive. I have checked (among others): - MAILMAN_ARCHIVER_FROM - doesn't make a difference. 127.0.0.1, external IP address, different orders, '*'. (Asterisk makes a difference, see at the bottom) - MAILMAN_ARCHIVER_KEY in mailman-web.py matches api_key in mailman-hyperkitty.cfg (except for the quotes). According to the editor's color coding, the quotes are "right", too. I have removed special characters to circumvent diverging treatment in different environments - I guess it doesn't matter, but wget --user restadmin --password [.] http://localhost:8001/3.1/lists works, too. - ACCOUNT_DEFAULT_HTTP_PROTOCOL = "https" (probably also doesn't matter I'm running a fresh package installation from Debian Bullseye with certificates from Certbot with nginx, so Certbot may have messed with my nginx config, but even that seems to be OK: Yes, Certbot has inserted http->https redirection, but I'd expect that a https base_url and ACCOUNT_DEFAULT_HTTP_PROTOCOL = "https" circumvents that. Mailman info says GNU Mailman 3.3.3 (Tom Sawyer) Python 3.9.2 (default, Feb 28 2021, 17:03:44) [GCC 10.2.1 20210110] . REST root url: http://localhost:8001/3.1/ Hyperkitty is 1.3.4, Postorious is 1.3.4, too. To provide all possible information, I'm also adding the nginx log that seems to correspond to that request (no other requests at that time, give or take five minutes): Yes, everything yields 403 response codes. [.] - - [19/Jan/2022:22:43:27 +0000] "GET /hyperkitty/api/mailman/urls?mlist=demo%40lists.pro-digi-par.de&key=[.] HTTP/1.1" 403 175 "-" "python-requests/2.25.1" [.] - - [19/Jan/2022:22:43:27 +0000] "GET /hyperkitty/api/mailman/urls?mlist=demo%40lists.pro-digi-par.de&msgid=AM0PR0 4MB478573911C2A81B8898527E6C2599%40AM0PR04MB4785.eurprd04.prod.outlook.com&k ey=[.] HTTP/1.1 " 403 175 "-" "python-requests/2.25.1" [.] - - [19/Jan/2022:22:43:28 +0000] "GET /hyperkitty/api/mailman/urls?mlist=demo%40lists.pro-digi-par.de&msgid=AM0PR0 4MB478573911C2A81B8898527E6C2599%40AM0PR04MB4785.eurprd04.prod.outlook.com&k ey=[.] HTTP/1.1 " 403 175 "-" "python-requests/2.25.1" [.] - - [19/Jan/2022:22:43:28 +0000] "POST /hyperkitty/api/mailman/archive?key=[.] HTTP/1.1" 403 166 "-" "python-requests/2.25.1" [.] - - [19/Jan/2022:22:43:28 +0000] "POST /hyperkitty/api/mailman/archive?key=[.] HTTP/1.1" 403 166 "-" "python-requests/2.25.1" . repeated many times, there seems to be quite a few testmessages in the queue . [.] - - [19/Jan/2022:22:46:50 +0000] "GET /hyperkitty/api/mailman/urls?mlist=demo%40lists.pro-digi-par.de&key=[.] HTTP/1.1" 403 175 "-" "python-requests/2.25.1" [.] - - [19/Jan/2022:22:46:50 +0000] "GET /hyperkitty/api/mailman/urls?mlist=demo%40lists.pro-digi-par.de&msgid=AM0PR0 4MB4785430188B9C0E8DF248231C2599%40AM0PR04MB4785.eurprd04.prod.outlook.com&k ey=6xpENHLEHQ0kD53vXt5RpKzPDOsKbcN9 HTTP/1.1 " 403 175 "-" "python-requests/2.25.1" [.] - - [19/Jan/2022:22:46:50 +0000] "POST /hyperkitty/api/mailman/archive?key=[.] HTTP/1.1" 403 166 "-" "python-requests/2.25.1" . again repeated many times . [.] - - [19/Jan/2022:22:46:51 +0000] "GET /hyperkitty/api/mailman/urls?mlist=demo%40lists.pro-digi-par.de&msgid=AM0PR0 4MB4785430188B9C0E8DF248231C2599%40AM0PR04MB4785.eurprd04.prod.outlook.com&k ey=[.] HTTP/1.1" 403 175 "-" "python-requests/2.25.1" I'd appreciate a new idea where I could look for clues. Thanks a lot, Josef

2 3

Help needed with email deliverability to our list
by Terry Earley 23 Jan '22

23 Jan '22

We are looking to hire someone to help us with email deliverability. We are running MM3 Postorius Version 1.3.4. We are having too many bounces, causing cancellations. Our IP address is likely on one or more spam lists even though our list has never sent any spam and every post is moderated. We need help resolving all email deliverability issues. We are seeking professional help and we are willing to pay fair rates. Experts only please. Terry Earley FitEyes

1 0

Lost posting in archives
by Axel Rau 22 Jan '22

22 Jan '22

I created a list, did migration from 2.1 and run update_index_one_list. Then I posted a test mail to the list and it got distributed and was seen in the archive. Now 2 days later it does no longer show up in the archive. What is going on here? May this have to do with HYPERKITTY_RENDER_INLINE_IMAGE which I have turned on meanwhile. Clueless, Axel --- PGP-Key: CDE74120 ☀ computing @ chaos claudius

2 4

How to delete user completely?
by William Oliver 22 Jan '22

22 Jan '22

I have installed mailman3 and it's up and running great. However, I noticed that, during a mass subscribe, I mis-typed an address, e.g. name(a)domain.ned rather than name(a)domain.net. I found how to unsubscribe the bad address, but I haven't found a "delete" option under Users or anywhere else. How to I purge a user from the users list? As a related question, in docs.mailman.org, I can find a list member's manual, but I can't seem to find an admin manual. Is there one? Thanks! billo

3 3

Speed/progress of update_index_one_list?
by Philip Colmer 21 Jan '22

21 Jan '22

Yesterday, I ran "mailman-web update_index_one_list" against a mailing list. The command output "Indexing 328077 emails" and that is the last I've heard from it. The process is still running but, looking in ~mailman/web/logs, I can't see anything happening related to that list. Is there any way to determine how far this process has got, or what it is actually doing? (Without stopping it) For future indexing, what makes the most difference to the speed? Does it benefit from having multiple cores if I resize the AWS instance to a larger processor? What is the bottleneck for this process? Thank you. Regards Philip

4 7

No module named 'mailman3hyperkitty'
by Axel Rau 20 Jan '22

20 Jan '22

Still trying to setup my 1st list. mailman-hyperkitty 1.2.0 is installed. Axel PS: Backtrace 16/Jan/2022:16:43:35 +0000] "GET /3.1/lists/mailman.lists.framail.de HTTP/1.1" 200 373 "-" "GNU Mailman REST client v3.3.3" [16/Jan/2022:16:43:35 +0000] "GET /3.1/lists/mailman.lists.framail.de/roster/owner?fields=email&fields=address&fields=self_link HTTP/1.1" 200 371 "-" "GNU Mailman REST client v3.3.3" [16/Jan/2022:16:43:35 +0000] "GET /3.1/lists/mailman.lists.framail.de/roster/moderator?fields=email&fields=address&fields=self_link HTTP/1.1" 200 90 "-" "GNU Mailman REST client v3.3.3" [16/Jan/2022:16:43:35 +0000] "GET /3.1/lists/mailman(a)lists.framail.de/config HTTP/1.1" 200 3011 "-" "GNU Mailman REST client v3.3.3" 2022-01-16 16:43:35 [FALCON] [ERROR] GET /3.1/lists/mailman.lists.framail.de/archivers => Traceback (most recent call last): File "/usr/local/py_venv/mailman_33/lib/python3.9/site-packages/falcon/app.py", line 361, in __call__ responder(req, resp, **params) File "/usr/local/py_venv/mailman_33/lib/python3.9/site-packages/mailman/rest/lists.py", line 405, in on_get archiver_set = IListArchiverSet(self._mlist) File "/usr/local/py_venv/mailman_33/lib/python3.9/site-packages/zope/component/_api.py", line 152, in adapter_hook return sitemanager.queryAdapter(object, interface, name, default) File "/usr/local/py_venv/mailman_33/lib/python3.9/site-packages/zope/interface/registry.py", line 354, in queryAdapter return self.adapters.queryAdapter(object, interface, name, default) File "/usr/local/py_venv/mailman_33/lib/python3.9/site-packages/mailman/database/transaction.py", line 85, in wrapper return function(args[0], config.db.store, *args[1:], **kws) File "/usr/local/py_venv/mailman_33/lib/python3.9/site-packages/mailman/model/mailinglist.py", line 616, in __init__ for archiver in config.archivers: File "/usr/local/py_venv/mailman_33/lib/python3.9/site-packages/mailman/config/config.py", line 280, in archivers archiver = call_name(class_path) File "/usr/local/py_venv/mailman_33/lib/python3.9/site-packages/mailman/utilities/modules.py", line 69, in call_name named_callable = find_name(dotted_name) File "/usr/local/py_venv/mailman_33/lib/python3.9/site-packages/mailman/utilities/modules.py", line 52, in find_name module = import_module(module_path) File "/usr/local/py_venv/mailman_33/lib/python3.9/importlib/__init__.py", line 127, in import_module return _bootstrap._gcd_import(name[level:], package, level) File "<frozen importlib._bootstrap>", line 1030, in _gcd_import File "<frozen importlib._bootstrap>", line 1007, in _find_and_load File "<frozen importlib._bootstrap>", line 984, in _find_and_load_unlocked ModuleNotFoundError: No module named 'mailman3hyperkitty' --- PGP-Key: CDE74120 ☀ computing @ chaos claudius

3 6

Problem creating list members using REST API
by Stephen Daniel 19 Jan '22

19 Jan '22

Mailman3 experts -- I am trying to subscribe a user to a mailing list via the REST API. This works: Posting to url http://localhost:8001/3.1/members POST payload: { "list_id": "<LISTID>", "subscriber": "d13b0bbb29844eb9af4b38dad7bb3707", } RESULT post of "http://localhost:8001/3.1/members" succeeds with code 202 This works does *not *work Posting to url http://localhost:8001/3.1/members POST payload: { "list_id": "<LISTID>", "subscriber": "d13b0bbb29844eb9af4b38dad7bb3707", "pre_approved": true } RESULT post of "http://localhost:8001/3.1/members" fails with code 500 Any suggestions? As best I can tell, inclusion of *any* boolean types in my JSON causes the error code 500. FWIW I am generating the JSON using go language's JSON package. I noticed in the API doc that the boolean values are represented as 'True' rather than 'true'. So I tried converting all instances of 'true' to 'True' in my encoded json. That produced an http 400 error, as it probably should. Thanks! -- Stephen

3 8

clone a list?
by Dave McGuire 18 Jan '22

18 Jan '22

Hi folks. Is there a way to clone or duplicate a list in MM3, i.e. create a list with a different name but other settings etc being identical? Thanks, -Dave -- Dave McGuire, AK4HZ New Kensington, PA

2 2