October 2021 - Mailman-users - lists.mailman3.org

Message of the day
by Henrik Rasmussen Oct. 27, 2021

Oct. 27, 2021

Are there any way of displaying a "Mesage of the day" to the users of Postorius and Hyperkitty?

2 1

Docker container issues.
by Mark Sapiro Oct. 26, 2021

Oct. 26, 2021

There have been a few recent requests for help with the Mailman Docker container images. These are packaged by Abhilash and I have no experience with Docker at all. The doc at https://docs.mailman3.org/en/latest/install/docker.html points to detailed docs at https://asynchronous.in/docker-mailman/ and suggest that issues should be reported on GitHub https://github.com/maxking/docker-mailman/issues where Abhilash will respond as he can. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

1 0

Re: uncaught bounce messages
by Mark Sapiro Oct. 26, 2021

Oct. 26, 2021

Putting back on the list. On 10/23/21 1:37 PM, David Bremner wrote: > Mark Sapiro <mark(a)msapiro.net> writes: >> >> If you send me the complete bounce message off list, I can see if it >> should be added to the recognition at >> https://gitlab.com/warsaw/flufl.bounce/. > > Please find attached. Thank you. I tested that DSN with current flufl.bounce and it is recognized as a temp failure for the reported address and that in turn should just be ignored by Mailman's bounce runner and not reported as unrecognized. What version of Mailman core is this and what version of flufl.bounce? -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 8

Struggle on upgrading mailman3-web to new version - Not Found: /mailman//
by Stefan Bauer Oct. 26, 2021

Oct. 26, 2021

Dear Users, I recently upraded mailman3 from Ubuntu 18 to 20. After accessing the web-interface via https://my.mailinglistserver.local/mailman3/postorius/lists/ I receive Not Found: /mailman//postorius/lists/ [pid: 1346851|app: 0|req: 4/4] 10.254.253.12 () {70 vars in 1369 bytes} [Mon Oct 25 10:39:59 2021] GET /mailman3/postorius/lists/ => generated 2821 bytes in 12 msecs (HTTP/1.1 404) 5 headers in 155 bytes (1 switches on core 1) Where does the wrong path come from (mailman vs. mailman3) After enabling Debug, i see in the browser the following: Page not found (404) Request Method: GET Request URL: https://my.mailinglistserver.local/mailman//postorius/lists/ Using the URLconf defined in urls, Django tried these URL patterns, in this order: ^$ ^postorius/ ^hyperkitty/ ^user-profile/delete$ [name='mm_user_account_delete'] ^user-profile/$ [name='mm_user_profile'] ^accounts/ ^admin/ The current path, /postorius/lists/, didn't match any of these. You're seeing this error because you have DEBUG = True in your Django settings file. Change that to False, and Django will display a standard 404 page. My apache configuration is very simply: # more /etc/apache2/conf-enabled/mailman3.conf Alias /mailman3/favicon.ico /var/lib/mailman3/web/static/postorius/img/favicon.ico Alias /mailman3/static /var/lib/mailman3/web/static <Directory "/var/lib/mailman3/web/static"> Require all granted </Directory> <IfModule mod_proxy_uwsgi.c> ProxyPass /mailman3/favicon.ico ! ProxyPass /mailman3/static ! ProxyPass /mailman3 unix:/run/mailman3-web/uwsgi.sock|uwsgi://localhost/ </IfModule> I dont see where the path gets traversed in the wrong way. Any help is greatly appreciated. thank you. Stefan

4 8

equivalent mailman 3 commands from 2.0
by bob B Oct. 25, 2021

Oct. 25, 2021

For my 2.0 environment, I have scripts to dump list info, but i can't find the equivalent in mailman 3, for some commands, for example I use: /usr/lib/mailman/bin/list_lists which equates in mailman3 to "mailman lists" /usr/lib/mailman/bin/list_members which equates in mailman3 to "mailman members [listname]" But I also use /usr/lib/mailman/bin/list_admins [listname] /usr/lib/mailman/bin/config_list [listname] Are there equivalent command line commands to get this info in mailman3? The mailman3 "mailman withlist [listname]" takes me into an interactive prompt not sure where to go from there. I can use the API curl --user [ADMIN]:[password] http://[IP]]/3.1/lists/[listname]/config | python3 -m json.tool But just curious if there is a command line equivalent like in mailman2?

2 2

Mailman and Exim 4.94.2 (Debian Bullseye)
by Andrew Hodgson Oct. 25, 2021

Oct. 25, 2021

Hi. I moved Mailman instance to a machine running Debian Bullseye last week. Ran into an issue with the Exim transport from this doc: https://docs.mailman3.org/projects/mailman/en/latest/src/mailman/docs/mta.h… The issue I ran into was that Exim wasn't able to resolve localhost in order to connect to the LMTP listener. I changed VPS provider at the same time (moved from Bytemark to Gandi) so not sure if they were doing anything different with DNS, but by default Exim doesn't use standard libraries to lookup hosts: https://www.exim.org/exim-html-current/doc/html/spec_html/ch-the_dnslookup_… I solved the issue by using the following configuration on the Mailman router: # /etc/exim4/conf.d/transport/55_mm3_transport mailman3_transport: driver = smtp protocol = lmtp allow_localhost gethostbyname hosts = localhost port = MM3_LMTP_PORT rcpt_include_affixes = true I haven't defined the lmtp settings at all in mailman.cfg meaning they are using the default settings of 127.0.0.1:8024. Is this the best modification to make to the Exim config or should I go an alternative route? Thanks. Andrew.

2 1

The MAILMAN_ARCHIVER_KEY was not sent as the Authorization HTTP header.
by Marco Marinello Oct. 25, 2021

Oct. 25, 2021

Hi everybody, as per subject, I'm getting this error in the hyperkitty log when mailman daemon tries to archive a mail. I've setup the hyperkitty.cfg file with api_key = MAILMAN_ARCHIVER_KEY in settings_local.py but still nothing. I've seen here and in GitLab issues some errors concerning a wrong api key but here it says that it wasn't sent at all. All packages installed via pip install + latest .zip release, including mailman-hyperkitty. Currently running on apache with mod_wsgi_py3 without https. Any clue? All the best, Marco Marinello

2 9

uncaught bounce messages
by David Bremner Oct. 23, 2021

Oct. 23, 2021

I'm getting (many) uncaught bounce messages for one user. Other than forcibly unsubscribing them, is there anything I can do? I hesitate to post this message publically, but here is what I can see, somewhat anonymized The MIME structure looks like └┬╴multipart/mixed 7030 bytes ├─╴text/plain 442 bytes ├─╴message/delivery-status 176 bytes └─╴text/rfc822-headers 5301 bytes In /var/log/mailman3/bounce.log I see lines like Oct 23 08:20:00 2021 (5320) Bounce message w/no discernable addresses: <hex-digits(a)foo.bar> In the delivery-status part I see Final-Recipient: rfc822; fub(a)foo.bar Action: delayed Status: 4.0.0 The initial text/plain part looks like Hi! This is the MAILER-DAEMON, please DO NOT REPLY to this email. A message is delayed for more than 4 hours for the following list of recipients: fub(a)foo.bar: Network error on destination MXs Please note that this is only a temporary failure report. The message is kept in the queue for up to 7 days. You DO NOT NEED to re-send the message to these recipients. Below is a copy of the original message:

2 1

installing a new instance of mm3
by Christian Stalberg Oct. 22, 2021

Oct. 22, 2021

Is this document that Brian Carpenter wrote still valid? https://wiki.list.org/DOC/Howto_Install_Mailman3_On_Debian10 Brian installed my instance. Now its broken. My lists are down. I'm getting nowhere with diagnostics and troubleshooting (which was easier with mailman 2). I'm considering a new install, hence the question. Thanks!

3 3

[Django] ERROR (EXTERNAL IP): Internal Server Error: /mailman3/accounts/XXXXX/login/
by Odhiambo Washington Oct. 22, 2021

Oct. 22, 2021

Where XXXXX from the subject implies github|fedora|openid|gitlab, etc, I edited my settings.py and removed those references to socialaccount auth providers, except google: INSTALLED_APPS = ( 'hyperkitty', 'postorius', 'django_mailman3', # Uncomment the next line to enable the admin: 'django.contrib.admin', # Uncomment the next line to enable admin documentation: # 'django.contrib.admindocs', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.staticfiles', 'rest_framework', 'django_gravatar', 'compressor', 'haystack', 'django_extensions', 'django_q', 'allauth', 'allauth.account', 'allauth.socialaccount', 'allauth.socialaccount.providers.google' ) On a daily basis, I get messages like below, referring to all those socialaccount auth providers that I removed. I am beginning to think that MM3 is reading a file other than that which I think it should. PS: I have restarted mailman, uwsgi, apache, and even the whole server. These messages just won't go away. Whole message here: Ubuntu Pastebin <https://pastebin.ubuntu.com/p/QPYDtXg5Fn/> -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254 7 3200 0004/+254 7 2274 3223 "Oh, the cruft.", egrep -v '^$|^.*#' :-)

3 2