January 2021 - Mailman-users - lists.mailman3.org

List rename
by Joel Lord 07 Jul '21

07 Jul '21

I'm in an odd situation where I need to rename a bunch of lists. They were all created on mailman2 originally and migrated to mailman3 (very successfully, TYVM) but the names were all originally discuss-<foo>@domain and it's very confusing to be sure you're always sending to the correct <foo>. We want to completely rename the lists to <foo>-discuss@domain. These lists do not keep archives, so if I have to resort to extracting the subscriber lists and the configs and building new lists, I'm completely fine with that. Problem is, I'm really used to MM2 and config_list and could do this without thinking using those tools... that I don't have. Running MM3 3.2.2 trying to make this happen. Any assistance I could get will be greatly appreciated. THANKS! -- Joel Lord Web Administrator, Alpha Psi Omega Grand Cast etc... etc... etc...

5 6

timezone in hyperkitty
by erlonmz＠hotmail.com 21 May '21

21 May '21

How do I change the hyperkitty timezone?

7 8

Disable user registration
by Torge Riedel 21 Mar '21

21 Mar '21

Hi list, how can I disable user registration? There are only two users, me - the admin - and an additional owner/moderator. The list setup we use is completely managed by the owner/moderator (about 100 mail adresses per list). Thanks Torge

6 13

Hyperkitty "All Threads" results in error
by Mark Dadgar 02 Mar '21

02 Mar '21

So I have been wrestling with this problem for a while now. Most times, but not every time, when someone clicks on the All Threads link in hyperkitty, a 500 error is generated. I googled it, obviously, and at first I thought it was related to this issue, but that has not proven to be the case: https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… <https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/…> I’ve attached a “backtrace” below. The archives were imported from a previous mm3 install a couple of months ago. The problem occurs even with a list state full of immediately recent posts. Anyone have thoughts on how I can fix this? - Mark ----- mark(a)pdc-racing.net | 408-348-2878 — Internal Server Error: /archives/list/trackjunkies(a)pdc-racing.net <mailto:archives/list/trackjunkies@pdc-racing.net>/latest VariableDoesNotExist at /archives/list/trackjunkies(a)pdc-racing.net <mailto:archives/list/trackjunkies@pdc-racing.net>/latest Failed lookup for key [sender] in None Request Method: GET Request URL: https://mail.pdc-racing.net/archives/list/trackjunkies@pdc-racing.net/latest <https://mail.pdc-racing.net/archives/list/trackjunkies@pdc-racing.net/latest> Django Version: 2.2.14 Python Executable: /opt/mailman/mm/venv/bin/python Python Version: 3.8.2 Python Path: ['/opt/mailman/mm', '/opt/mailman/mm/', '/opt/mailman/mm/bin', '/usr/lib/python38.zip', '/usr/lib/python3.8', '/usr/lib/python3.8/lib-dynload', '/opt/mailman/mm/venv/lib/python3.8/site-packages'] Server time: Sun, 4 Oct 2020 10:27:10 -0700 Installed Applications: ('hyperkitty', 'postorius', 'django_mailman3', 'django.contrib.admin', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.staticfiles', 'rest_framework', 'django_gravatar', 'compressor', 'haystack', 'django_extensions', 'django_q', 'allauth', 'allauth.account', 'allauth.socialaccount') Installed Middleware: ('django.contrib.sessions.middleware.SessionMiddleware', 'django.middleware.common.CommonMiddleware', 'django.middleware.csrf.CsrfViewMiddleware', 'django.middleware.locale.LocaleMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', 'django.contrib.messages.middleware.MessageMiddleware', 'django.middleware.clickjacking.XFrameOptionsMiddleware', 'django.middleware.security.SecurityMiddleware', 'django_mailman3.middleware.TimezoneMiddleware', 'postorius.middleware.PostoriusMiddleware') Traceback: File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in _resolve_lookup 829. current = current[bit] During handling of the above exception ('NoneType' object is not subscriptable), another exception occurred: File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in _resolve_lookup 837. current = getattr(current, bit) During handling of the above exception ('NoneType' object has no attribute 'sender'), another exception occurred: File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in _resolve_lookup 843. current = current[int(bit)] During handling of the above exception (invalid literal for int() with base 10: 'sender'), another exception occurred: File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/core/handlers/exception.py" in inner 34. response = get_response(request) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/core/handlers/base.py" in _get_response 115. response = self.process_exception_by_middleware(e, request) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/core/handlers/base.py" in _get_response 113. response = wrapped_callback(request, *callback_args, **callback_kwargs) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/hyperkitty/lib/view_helpers.py" in inner 134. return func(request, *args, **kwargs) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/hyperkitty/views/mlist.py" in archives 114. return _thread_list(request, mlist, threads, extra_context=extra_context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/hyperkitty/views/mlist.py" in _thread_list 143. return render(request, template_name, context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/shortcuts.py" in render 36. content = loader.render_to_string(template_name, context, request, using=using) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/loader.py" in render_to_string 62. return template.render(context, request) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/backends/django.py" in render 61. return self.template.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render 171. return self._render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in _render 163. return self.nodelist.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render 937. bit = node.render_annotated(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render_annotated 904. return self.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/loader_tags.py" in render 150. return compiled_parent._render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in _render 163. return self.nodelist.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render 937. bit = node.render_annotated(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render_annotated 904. return self.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/loader_tags.py" in render 62. result = block.nodelist.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render 937. bit = node.render_annotated(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render_annotated 904. return self.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/defaulttags.py" in render 209. nodelist.append(node.render_annotated(context)) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render_annotated 904. return self.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/loader_tags.py" in render 188. return template.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render 173. return self._render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in _render 163. return self.nodelist.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render 937. bit = node.render_annotated(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render_annotated 904. return self.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/defaulttags.py" in render 513. return self.nodelist.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render 937. bit = node.render_annotated(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in render_annotated 904. return self.render(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/templatetags/i18n.py" in render 132. context.update({var: val.resolve(context) for var, val in self.extra_context.items()}) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/templatetags/i18n.py" in <dictcomp> 132. context.update({var: val.resolve(context) for var, val in self.extra_context.items()}) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in resolve 692. arg_vals.append(arg.resolve(context)) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in resolve 796. value = self._resolve_lookup(context) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/template/base.py" in _resolve_lookup 848. raise VariableDoesNotExist("Failed lookup for key " Exception Type: VariableDoesNotExist at /archives/list/trackjunkies(a)pdc-racing.net <mailto:archives/list/trackjunkies@pdc-racing.net>/latest Exception Value: Failed lookup for key [sender] in None

2 4

is it possible to rebuild mailman-web database please?
by Giovanni Biscuolo 30 Jan '21

30 Jan '21

Hello, I'm pretty new to mailman3, especially it's internals. I upgraded a (running fine) mailman3 service from NixOS 20.03 https://nixos.wiki/wiki/Mailman to NixOS 20.09 https://nixos.org/manual/nixos/stable/index.html#module-services-mailman After the upgrade I got this very same issue: https://gitlab.com/mailman/hyperkitty/-/issues/328 --8<---------------cut here---------------start------------->8--- mailman mailman-web-setup-start[1832]: raise utils.IntegrityError( mailman mailman-web-setup-start[1832]: django.db.utils.IntegrityError: The row in table 'hyperkitty_attachment' with primary key '1' has an invalid foreign key: hyperkitty_attachment.email_id contains a value '7' that does not have a corresponding value in hyperkitty_email__old.id. --8<---------------cut here---------------end--------------->8--- I was not able to fix the migration issue so I recreated the mailman-web sqlite database (/var/lib/mailman-web) using the "migrate" function. After that, and after recreating the database many times, I'm getting this error when trying to access the web interface: --8<---------------cut here---------------start------------->8--- Jan 26 11:34:30 OMISSIS env[18167]: django.db.utils.OperationalError: no such table: django_site --8<---------------cut here---------------end--------------->8--- Actually the django_site table is in the database so I can't understand why of this message. Please is there a way to recreate the mailman-web database from scratch or to fix this kind of problems? Thanks! Giovanni -- Giovanni Biscuolo

2 1

So near, and yet so far (Configuring Mailman)
by j＠cklenox.earth 30 Jan '21

30 Jan '21

Hello all, I've spent more time than I care to admit trying to configure Mailman. And I almost have it all working now, but I just can't seem to get my Mailman/Postfix combo to receive emails. When I try to send emails to lists I'm rebuffed with undelivered notices with: <testlist(a)lists.fiftyshadesof.green>: Host or domain name not found. Name service error for name=lists type=AAAA: Host not found and: <testlist(a)lists.fiftyshadesof.green>: Host or domain name not found. Name service error for name=lists.fiftyshadesof.green type=MX: Host not found, try again This to me appears to be an issue with my DNS settings, but I can't work this out either. I have an A record for lists.fiftyshadesof.green pointing at my server, and an MX record pointing at that: lists.fiftyshadesof.green. 0 IN MX 0 lists.fiftyshadesof.green. lists.fiftyshadesof.green. 0 IN A 193.37.35.191 I have driven myself mad with this and would very much appreciate any advice anyone can offer. Many thanks! Jack

5 5

API errors making member changes to one list but not others
by Stephen Willey Mats Mats 28 Jan '21

28 Jan '21

We had an issue with the UI getting API timeouts for a single list for specific functions but not other lists or other functions. This started happening after we accidentally filled the disk partition used by most of the system including the database. There was a single person testing at the time when the disk fullness happened and it was only the single list that got ‘damaged’. After disk cleanup and restarting the docker images the single list would give API errors ("HTTP Error 400: HTTPConnectionPool(host='mailman-web', port=8000): Read timed out. (read timeout=5)” ) on the screen and logged errors (below) when list members were either subscribed or removed. The issue was repeatable in Postorius and did not ‘heal’. Oddly the issue was resolved by making seemingingly the same API calls from the command line via curl. Making the below call to add a member succeeded and fixed being able to add members in the UI. Similarly sending a DELETE cal from curl worked where unsubscribe requests from postorius (either mass removal or picking addresses from the list member and unsubscribing selected) failed. Again, the unsubscribe from the curl DELETE call ‘healed’ the list such that subsequent unsubscribes in Postorius worked. curl --user user:password -X POST -d 'list_id=laura-test.mm3.aca-aws.s.uw.edu' -d 'subscriber=ssw(a)uw.edu' -d 'pre_verified=true' -d 'pre_confirmed=true' -d 'pre_approved=true' http://172.19.199.2:8001/3.1/members We’re running the current rolling docker images (up to date as of 25Jan2021) Obviously, people should run their servers better than letting disk partitions fill-up but it’s going to happen and mailman3 should do a better job of reporting errors and recovering when accidents happen. thanks, steve I’ve included mailman.log lines from going to the mass subscribe [26/Jan/2021:20:42:49 +0000] "GET /3.1/lists/laura-test.mm3.aca-aws.s.uw.edu HTTP/1.1" 200 434 "-" "GNU Mailman REST client v3.3.2" [26/Jan/2021:20:42:49 +0000] "GET /3.1/lists/laura-test(a)mm3.aca-aws.s.uw.edu/requests/count?token_owner=moderator HTTP/1.1" 200 73 "-" "GNU Mailman REST client v3.3.2" [26/Jan/2021:20:42:49 +0000] "GET /3.1/lists/laura-test(a)mm3.aca-aws.s.uw.edu/held/count HTTP/1.1" 200 73 "-" "GNU Mailman REST client v3.3.2" [26/Jan/2021:20:43:01 +0000] "GET /3.1/lists/laura-test.mm3.aca-aws.s.uw.edu HTTP/1.1" 200 434 "-" "GNU Mailman REST client v3.3.2" Jan 26 20:43:07 2021 (48) deque: Traceback (most recent call last): File "/usr/lib/python3.8/site-packages/urllib3/connectionpool.py", line 426, in _make_request six.raise_from(e, None) File "<string>", line 3, in raise_from File "/usr/lib/python3.8/site-packages/urllib3/connectionpool.py", line 421, in _make_request httplib_response = conn.getresponse() File "/usr/lib/python3.8/http/client.py", line 1347, in getresponse response.begin() File "/usr/lib/python3.8/http/client.py", line 307, in begin version, status, reason = self._read_status() File "/usr/lib/python3.8/http/client.py", line 268, in _read_status line = str(self.fp.readline(_MAXLINE + 1), "iso-8859-1") File "/usr/lib/python3.8/socket.py", line 669, in readinto return self._sock.recv_into(b) socket.timeout: timed out During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3.8/site-packages/requests/adapters.py", line 439, in send resp = conn.urlopen( File "/usr/lib/python3.8/site-packages/urllib3/connectionpool.py", line 724, in urlopen retries = retries.increment( File "/usr/lib/python3.8/site-packages/urllib3/util/retry.py", line 403, in increment raise six.reraise(type(error), error, _stacktrace) File "/usr/lib/python3.8/site-packages/urllib3/packages/six.py", line 735, in reraise raise value File "/usr/lib/python3.8/site-packages/urllib3/connectionpool.py", line 670, in urlopen httplib_response = self._make_request( File "/usr/lib/python3.8/site-packages/urllib3/connectionpool.py", line 428, in _make_request self._raise_timeout(err=e, url=url, timeout_value=read_timeout) File "/usr/lib/python3.8/site-packages/urllib3/connectionpool.py", line 335, in _raise_timeout raise ReadTimeoutError( urllib3.exceptions.ReadTimeoutError: HTTPConnectionPool(host='mailman-web', port=8000): Read timed out. (read timeout=5) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3.8/site-packages/mailman/app/workflow.py", line 69, in __next__ return step() File "/usr/lib/python3.8/site-packages/mailman/app/subscriptions.py", line 343, in _step_do_subscription self.member = self.mlist.subscribe( File "/usr/lib/python3.8/site-packages/mailman/database/transaction.py", line 85, in wrapper return function(args[0], config.db.store, *args[1:], **kws) File "/usr/lib/python3.8/site-packages/mailman/model/mailinglist.py", line 507, in subscribe notify(SubscriptionEvent( File "/usr/lib/python3.8/site-packages/zope/event/__init__.py", line 32, in notify subscriber(event) File "/usr/lib/python3.8/site-packages/mailman/app/membership.py", line 176, in handle_SubscriptionEvent send_welcome_message(mlist, member, member.preferred_language) File "/usr/lib/python3.8/site-packages/mailman/app/notifications.py", line 51, in send_welcome_message welcome_message = wrap(getUtility(ITemplateLoader).get( File "/usr/lib/python3.8/site-packages/mailman/model/template.py", line 188, in get contents = getUtility(ITemplateManager).get( File "/usr/lib/python3.8/site-packages/mailman/database/transaction.py", line 85, in wrapper return function(args[0], config.db.store, *args[1:], **kws) File "/usr/lib/python3.8/site-packages/mailman/model/template.py", line 110, in get contents = protocols.get(actual_uri, **auth) File "/usr/lib/python3.8/site-packages/mailman/utilities/protocols.py", line 38, in get response = requests.get(url, timeout=REQUEST_TIMEOUT, **kws) File "/usr/lib/python3.8/site-packages/requests/api.py", line 76, in get return request('get', url, params=params, **kwargs) File "/usr/lib/python3.8/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/usr/lib/python3.8/site-packages/requests/sessions.py", line 530, in request resp = self.send(prep, **send_kwargs) File "/usr/lib/python3.8/site-packages/requests/sessions.py", line 643, in send r = adapter.send(request, **kwargs) File "/usr/lib/python3.8/site-packages/requests/adapters.py", line 529, in send raise ReadTimeout(e, request=request) requests.exceptions.ReadTimeout: HTTPConnectionPool(host='mailman-web', port=8000): Read timed out. (read timeout=5) [26/Jan/2021:20:43:07 +0000] "POST /3.1/members HTTP/1.1" 400 130 "-" "GNU Mailman REST client v3.3.2" [26/Jan/2021:20:43:07 +0000] "GET /3.1/lists/laura-test(a)mm3.aca-aws.s.uw.edu/requests/count?token_owner=moderator HTTP/1.1" 200 73 "-" "GNU Mailman REST client v3.3.2" [26/Jan/2021:20:43:07 +0000] "GET /3.1/lists/laura-test(a)mm3.aca-aws.s.uw.edu/held/count HTTP/1.1" 200 73 "-" "GNU Mailman REST client v3.3.2" Then the results of a successful subscribe: [26/Jan/2021:20:46:20 +0000] "GET /3.1/lists/list2.mm3.aca-aws.s.uw.edu HTTP/1.1" 200 388 "-" "GNU Mailman REST client v3.3.2" [26/Jan/2021:20:46:20 +0000] "POST /3.1/members HTTP/1.1" 201 0 "-" "GNU Mailman REST client v3.3.2" [26/Jan/2021:20:46:20 +0000] "GET /3.1/lists/list2(a)mm3.aca-aws.s.uw.edu/requests/count?token_owner=moderator HTTP/1.1" 200 73 "-" "GNU Mailman REST client v3.3.2" [26/Jan/2021:20:46:20 +0000] "GET /3.1/lists/list2(a)mm3.aca-aws.s.uw.edu/held/count HTTP/1.1" 200 73 "-" "GNU Mailman REST client v3.3.2” >

2 1

Perplexing unsubscribing notification problem
by Brian Carpenter 27 Jan '21

27 Jan '21

Hi MM3 Users, I have a perplexing issue with one of our Mailman 3 servers. It doesn't want to send out unsubscribe notifications when a List Owner removes a list member. The server sends out welcome messages and subscription notifications fine just not unsubscribe notifications when a List Owner removes a list member. It will send out an unsubscribe notification if the list member sends an email to listname-leave@listdomain both to the List Owner and List Member. Nothing is showing in the logs as far as I can tell. -- Brian Carpenter Harmonylists.com Emwd.com

1 1

I like your style, but what is it?
by Stephen Willey Mats Mats 27 Jan '21

27 Jan '21

How do I get a dump of list settings for each style. Thanks, steve p.s. the search on https://mailman.readthedocs.io/en/latest/README.html gives results but every link needs to have ‘projects/mailman/‘ removed from the url to work.

2 1

Problem updating mailman
by Odhiambo Washington 26 Jan '21

26 Jan '21

I am getting this error after I did a git pull and build. (venv) [mailman3@gw ~/git]$ /opt/mailman/mm/bin/mailman-post-update + '[' False == False ']' + mkdir -p /opt/mailman/mm/static + /opt/mailman/mm/bin/django-admin collectstatic --clear --noinput --verbosity 0 +* /opt/mailman/mm/bin/django-admin compress* CommandError: An error occurred during rendering /opt/mailman/mm/venv/lib/python3.7/site-packages/HyperKitty-1.3.4rc2-py3.7.egg/hyperkitty/templates/hyperkitty/404.html: /usr/local/lib/ruby/site_ruby/2.7/rubygems/dependency.rb:311:in `to_specs': Could not find 'sass-listen' (~> 4.0.0) among 4 total gem(s) (Gem::MissingSpecError) Checked in 'GEM_PATH=/opt/mailman/.gem/ruby/2.7:/usr/local/lib/ruby/gems/2.7', execute `gem env` for more information from /usr/local/lib/ruby/site_ruby/2.7/rubygems/specification.rb:1446:in `block in activate_dependencies' from /usr/local/lib/ruby/site_ruby/2.7/rubygems/specification.rb:1435:in `each' from /usr/local/lib/ruby/site_ruby/2.7/rubygems/specification.rb:1435:in `activate_dependencies' from /usr/local/lib/ruby/site_ruby/2.7/rubygems/specification.rb:1417:in `activate' from /usr/local/lib/ruby/site_ruby/2.7/rubygems.rb:305:in `block in activate_bin_path' from /usr/local/lib/ruby/site_ruby/2.7/rubygems.rb:304:in `synchronize' from /usr/local/lib/ruby/site_ruby/2.7/rubygems.rb:304:in `activate_bin_path' from /usr/local/bin/sass:23:in `<main>' The other output from this process is so long so I pasted it here: https://pastebin.ubuntu.com/p/tsB2CCNrQG/ Thanks -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254 7 3200 0004/+254 7 2274 3223 "Oh, the cruft.", grep ^[^#] :-)

3 4