April 2020 - Mailman-users - lists.mailman3.org

Separating Lists by Domain
by brian＠emwd.com 01 May '20

01 May '20

I have successfully setup a second domain with my Mailman3 setup. I also created a list using the second domain. So I have two domains with one list each. The issue I see at this point is all of the lists are shown via Postorius regardless of the list domain used. Is it possible to have only the lists to show that are part of the domain being used to access? For example: http://domaina.com/postorius/lists/ Only listnames(a)domaina.com show up. http://domainb.com/postorius/lists/ Only listnames(a)domainb.com show up. Right now both domaina AND domainb lists showup regardless of the domain being used to access Postorius. The same goes for Hyperkitty as well. Brian

6 11

Running mailman3 on AWS and dealing with SES email verification
by Mohsen Masoudfar 01 May '20

01 May '20

Hi, This seems to be a very basic question and/or issue, but I could not find a reliable for it: Assume a list member with the email address like (just as an example) joe.student(a)university.edu<mailto:joe.student@university.edu> sends an email to a list, Mailman gets the email, processes it and would try to send that email to all members with a sender field as: 'joe.student(a)university.edu<mailto:joe.student@university.edu>'. plus listname(a)listserver.TLD<mailto:listname@listserver.TLD> AWS allows verified email addresses to send an email from an EC2 to internet, so the listname(a)listserver.TLD<mailto:listname@listserver.TLD> is OK, because listserver.TLD is already verified, BUT Joe's email is not and cannot be, because there are thousands of list users and they can change daily. The result is that Mailman's try to send the email would fail with the following error message: Message rejected: Email address is not verified. The following identities failed the check in region US-EAST-1: joe.student(a)university.edu<mailto:joe.student@university.edu> I changed the list property and made it an anonymous one, and it started sending the emails to the whole list members, but only with listname(a)listserver.TLD<mailto:listname@listserver.TLD> as the sender. So the list recipients cannot know the initiator of the discussion. I found some solution: * Asking the members to add their email to the signature * manipulating the from field and add the name of the sender as a comment, not that easy, needs some Python code * manipulating the from files and replacing the @ with something else, not that easy, needs some Python code * . . . More important: None of these would allow a simple click on the reply bottom to send the email to the original sender. I am thinking of running mailman on-premise and use our email relay, which we have full control on. But really, there is no elegant solution for this? I already opened a ticket with AWS support and they just insisted on their policy of verification. Best regards Mohsen Masoudfar Lead System Analyst, IT Operation American Association for the Advancement of Science 1200 New York Ave, NW, Washington, DC 20005 202-326-7087

2 3

Recipient address rejected: User unknown in local recipient table
by Mohsen Masoudfar 01 May '20

01 May '20

Hi, I created a list called list_b@newlistserv.<tld<mailto:list_b@newlistserv.%3ctld>> , and added a user to it and invited the user. The user got a welcome email, when the user replies with help, The email gets rejected with the message: list_b wasn't found at newlistserv.<tld> and I see this entry in the postfix log on the server: postfix/smtpd[6757]: NOQUEUE: reject: RCPT from mail-eopbgr750113.outbound.xxx: 550 5.1.1 <list_b(a)newlistserv.xxx>: Recipient address rejected: User unknown in local recipient table; from=<xxx> to=<list_b(a)newlistserv.xxx> proto=ESMTP helo=<NAM02-BL2-obe.outbound.protection.outlook.com> I am new to mailman3, my understanding was, maybe wrong, that when I create a list, mailman3 adds that to the local list of users. I think , I am missing something . . . Or probably this is related to a postfix setting? Best regards Mohsen

3 6

I have issue where it does not send emails on to people in the list I create.
by john_warland＠hotmail.com 30 Apr '20

30 Apr '20

Hello, I am quite new to Mailman3 and have been trying to get a working local test setup on a single VM (Centos07) I have issue where if I send an email to the list. it does not send emails on to the people subscribed to that list. Note the steps below were put together from memory after a few days of repeatably trying different things so there will be some inaccuracies I have mailman running on same local box as postfix, postorius and hyperkitty. I have root as the superuser in Postorius and have tried the following: In unix shell created new user 'developer' In unix shell created new user 'tester' In shell send an email from developer user to tester: echo 'Hello' | mailx -s 'Hello Subject line' tester(a)sandbox.mytest.com Confirmed user tester received email in cat /home/tester/Maildir/new/ folder: Return-Path: <developer(a)cloud7.sandbox.mytest.com> X-Original-To: tester(a)cloud7.sandbox.mytest.com Delivered-To: tester(a)cloud7.sandbox.mytest.com Received: by cloud7.sandbox.mytest.com (Postfix, from userid 1000) In Postorius web frontend: Signed up as root Received confirmation email in /root/Maildir/new/ folder so cut and pasted the Url in the email to activate account. Created new list called testlist(a)sandbox.mytest.com Logged out Signed up as tester Received confirmation email in /home/tester/Maildir/new/ folder so cut and pasted the Url to activate account. Subscribed tester to the testlist. Next in unix shell su as developer and send an email to testlist(a)sandbox.mytest.com The root user gets the following email Content-Transfer-Encoding: 7bit Subject: Your message to testlist(a)cloud7.sandbox.mytest.com awaits moderator approval From: testlist-bounces(a)cloud7.sandbox.mytest.com To: developer(a)cloud7.sandbox.mytest.com Message-ID: <158824480291.3035.17408340520496115243(a)localhost.localdomain> Date: Thu, 30 Apr 2020 11:06:42 +0000 Precedence: bulk X-Mailman-Version: 3.3.0 Your mail to 'testlist(a)cloud7.sandbox.mytest.com' with the subject hello there 2 Is being held until the list moderator can review it for approval. The message is being held because: The message is not from a list member Either the message will get posted to the list, or you will receive notification of the moderator's decision. Once I have gone back into Postorius as root and approved the message, root user gets a second email: Return-Path: <testlist-bounces(a)cloud7.sandbox.mytest.com> X-Original-To: root(a)cloud7.sandbox.mytest.com Delivered-To: root(a)cloud7.sandbox.mytest.com Received: from localhost.localdomain (localhost [IPv6:::1]) by cloud7.sandbox.mytest.com (Postfix) with ESMTP id E056A84CE4 for <root(a)cloud7.sandbox.mytest.com>; Thu, 30 Apr 2020 11:09:10 +0000 (UTC) Received: by cloud7.sandbox.mytest.com (Postfix, from userid 1000) id 8F1B684CE4; Thu, 30 Apr 2020 11:06:41 +0000 (UTC) Date: Thu, 30 Apr 2020 11:06:41 +0000 To: testlist(a)cloud7.sandbox.mytest.com User-Agent: Heirloom mailx 12.5 7/5/10 MIME-Version: 1.0 Message-Id: <20200430110641.8F1B684CE4(a)sandbox.mytest.com> From: developer(a)cloud7.sandbox.mytest.com X-MailFrom: developer(a)cloud7.sandbox.mytest.com X-Mailman-Rule-Hits: nonmember-moderation X-Mailman-Rule-Misses: dmarc-mitigation; no-senders; approved; emergency; loop; banned-address; member-moderation Message-ID-Hash: FAPTJKJRZG2ELSOSBRBIDOBWXP3Y5QAY X-Message-ID-Hash: FAPTJKJRZG2ELSOSBRBIDOBWXP3Y5QAY X-Mailman-Approved-At: Thu, 30 Apr 2020 11:09:10 +0000 X-Mailman-Version: 3.3.0 Precedence: list Subject: [Testlist] hello there 2 List-Id: A test list <testlist.sandbox.mytest.com> List-Help: <mailto:testlist-request@sandbox.mytest.com?subject=help> List-Post: <mailto:testlist@sandbox.mytest.com> List-Subscribe: <mailto:testlist-join@sandbox.mytest.com> List-Unsubscribe: <mailto:testlist-leave@sandbox.mytest.com> Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit A test email 2 _______________________________________________ Testlist mailing list -- testlist(a)sandbox.mytest.com To unsubscribe send an email to testlist-leave(a)sandbox.mytest.com At no point does the email appear in the tester(a)sandbox.mytest.com Maildir Configs as follows.. ================================================================================================== /etc/postfix/main.cf: ================================================================================================== queue_directory = /var/spool/postfix command_directory = /usr/sbin daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix mail_owner = postfix myhostname = cloud7.sandbox.mytest.com mydomain = sandbox.mytest.com myorigin = $mydomain inet_interfaces = all inet_protocols = all mydestination = $myhostname, localhost.$mydomain, localhost, mail.$mydomain, www.$mydomain, ftp.$mydomain, sandbox.mytest.com unknown_local_recipient_reject_code = 550 # Next line Obfuscated mynetworks = 192.***.***.0/24, 127.0.0.0/8 alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases recipient_delimiter = + home_mailbox = Maildir/ debug_peer_level = 2 debug_peer_list = sandbox.mytest.com debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin ddd $daemon_directory/$process_name $process_id & sleep 5 sendmail_path = /usr/sbin/sendmail.postfix newaliases_path = /usr/bin/newaliases.postfix mailq_path = /usr/bin/mailq.postfix setgid_group = postdrop html_directory = no manpage_directory = /usr/share/man sample_directory = /usr/share/doc/postfix-2.10.1/samples readme_directory = /usr/share/doc/postfix-2.10.1/README_FILES disable_dns_lookups = yes owner_request_special = no transport_maps = hash:/var/lib/mailman/data/postfix_lmtp # Setting to nothing fixes 'Recepient address rejected: User unknown in local recipient table local_recipient_maps = relay_domains = hash:/var/lib/mailman/data/postfix_domains ================================================================================================== /etc/mailman.cfg ================================================================================================== [devmode] enabled: yes recipient: root(a)sandbox.mytest.com [mailman] # local = Recommended as installing mailman from source. Folder structure in /var/tmp/mailman # fhs = /var/bin, /var/log, etc.. layout: fhs [logging.database] level: info [mta] # This config is for when mailman and the MTA (Postfix) are on the same host incoming: mailman.mta.postfix.LMTP outgoing: mailman.mta.deliver.deliver lmtp_host: 127.0.0.1 lmtp_port: 8024 smtp_host: localhost smtp_port: 25 configuration: python:mailman.config.postfix [webservice] hostname: localhost port: 8001 use_https: no admin_user: restadmin admin_pass: restpass api_version: 3.1 ================================================================================================== /etc/mailman-suite-1.0.0/mailman-suite_project/settings.py ================================================================================================== In this file the main changes were: DEBUG=True SERVER_EMAIL = 'root(a)localhost.local' EMAIL_BACKEND = 'django.core.mail.backends.smtp.EmailBackend' Commented out three lines of code: # if DEBUG == True: # EMAIL_BACKEND = 'django.core.mail.backends.filebased.EmailBackend' # EMAIL_FILE_PATH = os.path.join(BASE_DIR, 'emails') Complete file: """ Django Settings for Mailman Suite (hyperkitty + postorius) For more information on this file, see https://docs.djangoproject.com/en/1.8/topics/settings/ For the full list of settings and their values, see https://docs.djangoproject.com/en/1.8/ref/settings/ """ # Build paths inside the project like this: os.path.join(BASE_DIR, ...) import os BASE_DIR = os.path.dirname(os.path.abspath(__file__)) # SECURITY WARNING: keep the secret key used in production secret! SECRET_KEY = 'change-this-on-your-production-server' # SECURITY WARNING: don't run with debug turned on in production! # Have to keep it True atm as the css styles screw up when set to False DEBUG = True ADMINS = ( ('Mailman Suite Admin', 'root@localhost'), ) SITE_ID = 1 # Hosts/domain names that are valid for this site; required if DEBUG is False # See https://docs.djangoproject.com/en/1.8/ref/settings/#allowed-hosts ALLOWED_HOSTS = [ "localhost", # Archiving API from Mailman, keep it. "MAILMAN_SERVER_ADDRESS", <--- I inject IP Address here # Add here all production URLs you may have. ] # Mailman API credentials MAILMAN_REST_API_URL = 'http://localhost:8001' MAILMAN_REST_API_USER = 'restadmin' MAILMAN_REST_API_PASS = 'restpass' MAILMAN_ARCHIVER_KEY = 'SecretArchiverAPIKey' MAILMAN_ARCHIVER_FROM = ('127.0.0.1', '::1') # Application definition INSTALLED_APPS = ( 'hyperkitty', 'postorius', 'django_mailman3', # Uncomment the next line to enable the admin: 'django.contrib.admin', # Uncomment the next line to enable admin documentation: # 'django.contrib.admindocs', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.staticfiles', 'rest_framework', 'django_gravatar', 'compressor', 'haystack', 'django_extensions', 'django_q', 'allauth', 'allauth.account', 'allauth.socialaccount', 'django_mailman3.lib.auth.fedora', 'allauth.socialaccount.providers.openid', 'allauth.socialaccount.providers.github', 'allauth.socialaccount.providers.gitlab', 'allauth.socialaccount.providers.google', # 'allauth.socialaccount.providers.facebook', 'allauth.socialaccount.providers.twitter', 'allauth.socialaccount.providers.stackexchange', ) MIDDLEWARE = ( 'django.contrib.sessions.middleware.SessionMiddleware', 'django.middleware.common.CommonMiddleware', 'django.middleware.csrf.CsrfViewMiddleware', 'django.middleware.locale.LocaleMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', 'django.contrib.messages.middleware.MessageMiddleware', 'django.middleware.clickjacking.XFrameOptionsMiddleware', 'django.middleware.security.SecurityMiddleware', 'django_mailman3.middleware.TimezoneMiddleware', 'postorius.middleware.PostoriusMiddleware', ) ROOT_URLCONF = 'urls' TEMPLATES = [ { 'BACKEND': 'django.template.backends.django.DjangoTemplates', 'DIRS': [], 'APP_DIRS': True, 'OPTIONS': { 'context_processors': [ 'django.template.context_processors.debug', 'django.template.context_processors.i18n', 'django.template.context_processors.media', 'django.template.context_processors.static', 'django.template.context_processors.tz', 'django.template.context_processors.csrf', 'django.template.context_processors.request', 'django.contrib.auth.context_processors.auth', 'django.contrib.messages.context_processors.messages', 'django_mailman3.context_processors.common', 'hyperkitty.context_processors.common', 'postorius.context_processors.postorius', ], }, }, ] WSGI_APPLICATION = 'wsgi.application' # Database # https://docs.djangoproject.com/en/1.8/ref/settings/#databases DATABASES = { 'default': { # Use 'sqlite3', 'postgresql_psycopg2', 'mysql', 'sqlite3' or 'oracle'. 'ENGINE': 'django.db.backends.sqlite3', # DB name or path to database file if using sqlite3. 'NAME': os.path.join(BASE_DIR, 'mailmansuite.db'), # The following settings are not used with sqlite3: 'USER': 'mailmansuite', 'PASSWORD': 'mmpass', # HOST: empty for localhost through domain sockets or '127.0.0.1' for # localhost through TCP. 'HOST': '', # PORT: set to empty string for default. 'PORT': '', } # Example for PostgreSQL (recommanded for production): #'default': { # 'ENGINE': 'django.db.backends.postgresql_psycopg2', # 'NAME': 'database_name', # 'USER': 'database_user', # 'PASSWORD': 'database_password', # 'HOST': 'localhost', #} } # If you're behind a proxy, use the X-Forwarded-Host header # See https://docs.djangoproject.com/en/1.8/ref/settings/#use-x-forwarded-host # USE_X_FORWARDED_HOST = True # And if your proxy does your SSL encoding for you, set SECURE_PROXY_SSL_HEADER # https://docs.djangoproject.com/en/1.8/ref/settings/#secure-proxy-ssl-header # SECURE_PROXY_SSL_HEADER = ('HTTP_X_FORWARDED_PROTO', 'https') # SECURE_PROXY_SSL_HEADER = ('HTTP_X_FORWARDED_SCHEME', 'https') # Other security settings # SECURE_SSL_REDIRECT = True # If you set SECURE_SSL_REDIRECT to True, make sure the SECURE_REDIRECT_EXEMPT # contains at least this line: # SECURE_REDIRECT_EXEMPT = [ # "archives/api/mailman/.*", # Request from Mailman. # ] # SESSION_COOKIE_SECURE = True # SECURE_CONTENT_TYPE_NOSNIFF = True # SECURE_BROWSER_XSS_FILTER = True # CSRF_COOKIE_SECURE = True # CSRF_COOKIE_HTTPONLY = True # X_FRAME_OPTIONS = 'DENY' # Password validation # https://docs.djangoproject.com/en/1.9/ref/settings/#auth-password-validators AUTH_PASSWORD_VALIDATORS = [ { 'NAME': 'django.contrib.auth.password_validation.UserAttributeSimilarityValidator', }, { 'NAME': 'django.contrib.auth.password_validation.MinimumLengthValidator', }, { 'NAME': 'django.contrib.auth.password_validation.CommonPasswordValidator', }, { 'NAME': 'django.contrib.auth.password_validation.NumericPasswordValidator', }, ] # Internationalization # https://docs.djangoproject.com/en/1.8/topics/i18n/ LANGUAGE_CODE = 'en-us' TIME_ZONE = 'UTC' USE_I18N = True USE_L10N = True USE_TZ = True # Static files (CSS, JavaScript, Images) # https://docs.djangoproject.com/en/1.8/howto/static-files/ # Absolute path to the directory static files should be collected to. # Don't put anything in this directory yourself; store your static files # in apps' "static/" subdirectories and in STATICFILES_DIRS. # Example: "/var/www/example.com/static/" STATIC_ROOT = os.path.join(BASE_DIR, 'static') # URL prefix for static files. # Example: "http://example.com/static/", "http://static.example.com/" STATIC_URL = '/static/' # Additional locations of static files STATICFILES_DIRS = ( # Put strings here, like "/home/html/static" or "C:/www/django/static". # Always use forward slashes, even on Windows. # Don't forget to use absolute paths, not relative paths. # BASE_DIR + '/static/', ) # List of finder classes that know how to find static files in # various locations. STATICFILES_FINDERS = ( 'django.contrib.staticfiles.finders.FileSystemFinder', 'django.contrib.staticfiles.finders.AppDirectoriesFinder', # 'django.contrib.staticfiles.finders.DefaultStorageFinder', 'compressor.finders.CompressorFinder', ) # Django 1.6+ defaults to a JSON serializer, but it won't work with # django-openid, see # https://bugs.launchpad.net/django-openid-auth/+bug/1252826 SESSION_SERIALIZER = 'django.contrib.sessions.serializers.PickleSerializer' LOGIN_URL = 'account_login' LOGIN_REDIRECT_URL = 'list_index' LOGOUT_URL = 'account_logout' # If you enable internal authentication, this is the address that the emails # will appear to be coming from. Make sure you set a valid domain name, # otherwise the emails may get rejected. # https://docs.djangoproject.com/en/1.8/ref/settings/#default-from-email # DEFAULT_FROM_EMAIL = "mailing-lists(a)you-domain.org" DEFAULT_FROM_EMAIL = 'postorius(a)localhost.local' # If you enable email reporting for error messages, this is where those emails # will appear to be coming from. Make sure you set a valid domain name, # otherwise the emails may get rejected. # https://docs.djangoproject.com/en/1.8/ref/settings/#std:setting-SERVER_EMAIL # SERVER_EMAIL = 'root(a)your-domain.org' SERVER_EMAIL = 'root(a)localhost.local' EMAIL_BACKEND = 'django.core.mail.backends.smtp.EmailBackend' # Compatibility with Bootstrap 3 from django.contrib.messages import constants as messages # flake8: noqa MESSAGE_TAGS = { messages.ERROR: 'danger' } # # Social auth # AUTHENTICATION_BACKENDS = ( 'django.contrib.auth.backends.ModelBackend', 'allauth.account.auth_backends.AuthenticationBackend', ) # Django Allauth ACCOUNT_AUTHENTICATION_METHOD = "username_email" ACCOUNT_EMAIL_REQUIRED = True ACCOUNT_EMAIL_VERIFICATION = "mandatory" # You probably want https in production, but this is a dev setup file ACCOUNT_DEFAULT_HTTP_PROTOCOL = "http" ACCOUNT_UNIQUE_EMAIL = True SOCIALACCOUNT_PROVIDERS = { 'openid': { 'SERVERS': [ dict(id='yahoo', name='Yahoo', openid_url='http://me.yahoo.com'), ], }, 'google': { 'SCOPE': ['profile', 'email'], 'AUTH_PARAMS': {'access_type': 'online'}, }, 'facebook': { 'METHOD': 'oauth2', 'SCOPE': ['email'], 'FIELDS': [ 'email', 'name', 'first_name', 'last_name', 'locale', 'timezone', ], 'VERSION': 'v2.4', }, } # # Gravatar # https://github.com/twaddington/django-gravatar # # Gravatar base url. # GRAVATAR_URL = 'http://cdn.libravatar.org/' # Gravatar base secure https url. # GRAVATAR_SECURE_URL = 'https://seccdn.libravatar.org/' # Gravatar size in pixels. # GRAVATAR_DEFAULT_SIZE = '80' # An image url or one of the following: 'mm', 'identicon', 'monsterid', # 'wavatar', 'retro'. # GRAVATAR_DEFAULT_IMAGE = 'mm' # One of the following: 'g', 'pg', 'r', 'x'. # GRAVATAR_DEFAULT_RATING = 'g' # True to use https by default, False for plain http. # GRAVATAR_DEFAULT_SECURE = True # # django-compressor # https://pypi.python.org/pypi/django_compressor # COMPRESS_PRECOMPILERS = ( ('text/less', 'lessc {infile} {outfile}'), ('text/x-scss', 'sass -t compressed {infile} {outfile}'), ('text/x-sass', 'sass -t compressed {infile} {outfile}'), ) # On a production setup, setting COMPRESS_OFFLINE to True will bring a # significant performance improvement, as CSS files will not need to be # recompiled on each requests. It means running an additional "compress" # management command after each code upgrade. # http://django-compressor.readthedocs.io/en/latest/usage/#offline-compression # COMPRESS_OFFLINE = True # Needed for debug mode # INTERNAL_IPS = ('127.0.0.1',) # # Full-text search engine # HAYSTACK_CONNECTIONS = { 'default': { 'ENGINE': 'haystack.backends.whoosh_backend.WhooshEngine', 'PATH': os.path.join(BASE_DIR, "fulltext_index"), # You can also use the Xapian engine, it's faster and more accurate, # but requires another library. # http://django-haystack.readthedocs.io/en/v2.4.1/installing_search_engines.h… # Example configuration for Xapian: #'ENGINE': 'xapian_backend.XapianEngine' }, } # # Asynchronous tasks # Q_CLUSTER = { 'timeout': 300, 'save_limit': 100, 'orm': 'default', } # A sample logging configuration. The only tangible logging # performed by this configuration is to send an email to # the site admins on every HTTP 500 error when DEBUG=False. # See http://docs.djangoproject.com/en/dev/topics/logging for # more details on how to customize your logging configuration. LOGGING = { 'version': 1, 'disable_existing_loggers': False, 'filters': { 'require_debug_false': { '()': 'django.utils.log.RequireDebugFalse' } }, 'handlers': { 'mail_admins': { #'level': 'ERROR', 'level': 'INFO', 'filters': ['require_debug_false'], 'class': 'django.utils.log.AdminEmailHandler' }, 'file':{ #'level': 'ERROR', 'level': 'INFO', #'class': 'logging.handlers.RotatingFileHandler', 'class': 'logging.handlers.WatchedFileHandler', 'filename': os.path.join(BASE_DIR, 'logs', 'mailmansuite.log'), 'formatter': 'verbose', }, 'console': { 'class': 'logging.StreamHandler', 'formatter': 'simple', }, }, 'loggers': { 'django.request': { 'handlers': ['mail_admins', 'file'], #'level': 'ERROR', 'level': 'INFO', 'propagate': True, }, 'django': { 'handlers': ['file'], #'level': 'ERROR', 'level': 'INFO', 'propagate': True, }, 'hyperkitty': { 'handlers': ['file'], #'level': 'DEBUG', 'level': 'INFO', 'propagate': True, }, 'postorius': { 'handlers': ['console', 'file'], #'level': 'ERROR', 'level': 'INFO', }, }, 'formatters': { 'verbose': { 'format': '%(levelname)s %(asctime)s %(process)d %(name)s %(message)s' }, 'simple': { 'format': '%(levelname)s %(message)s' }, }, 'root': { 'handlers': ['file'], #'level': 'ERROR', 'level': 'INFO', }, } # Using the cache infrastructure can significantly improve performance on a # production setup. This is an example with a local Memcached server. #CACHES = { # 'default': { # 'BACKEND': 'django.core.cache.backends.memcached.PyLibMCCache', # 'LOCATION': '127.0.0.1:11211', # } #} # When DEBUG is True, don't actually send emails to the SMTP server, just store # them in a directory. This way you won't accidentally spam your mailing-lists # while you're fiddling with the code. # Kept DEBUG=True as it breaks css styling when set to False so commented out this code as temp fix. #if DEBUG == True: # EMAIL_BACKEND = 'django.core.mail.backends.filebased.EmailBackend' # EMAIL_FILE_PATH = os.path.join(BASE_DIR, 'emails') # # HyperKitty-specific # # Only display mailing-lists from the same virtual host as the webserver FILTER_VHOST = False POSTORIUS_TEMPLATE_BASE_URL = 'http://localhost:8000' try: from settings_local import * except ImportError: pass

2 5

Importing Mailman 2 Lists apart from Django
by Brian Carpenter 30 Apr '20

30 Apr '20

Hello Mailman Users, Are there instructions on importing a Mailman 2 list into a Mailman 3 core installation only? Does the import21 script not need Django/Postorius/Hyperkitty? It seems Django is required to import archives I guess because of the use of Hyperkitty. How about importing archives without having a Django installation? Is that what the prototype archiver for? We are getting ready to start working on a custom forum application for Mailman 3 (called Empathy) and I am would like to import some mailman 2 archives into the development server to work with. Thanks. -- Please let me know if you need further assistance. Thank you for your business. We appreciate our clients. Brian Carpenter EMWD.com -- EMWD's Knowledgebase: https://clientarea.emwd.com/index.php/knowledgebase EMWD's Community Forums http://discourse.emwd.com/

3 3

MM3 on debian - redirect problem
by Gelpi Andrea 30 Apr '20

30 Apr '20

Hi, on a debian10 I have mm3 installed via apt-get apt-get install mailman3-full dpkg-reconfigure mailman3 dpkg-reconfigure mailman3-web I have this minor issue https://webserver/mailman3 redirects to http://webserver/mailman/postorius/lists/ that doesn't exist. The same problem form django admin page to return to lists https://website/mailman3/admin/sites/site In the upper right corner I have a link to https://webserver/mailman3 that redirects to https://mailman/postorius/lists/ I searched for a redirect but without success. Thank You -- Gelpi ing. Andrea ************************************************** I documenti vitali dimostreranno la loro vitalitˆ spostandosi spontaneamente da dove li avevate lasciati a dove non riuscirete a trovarli. **************************************************

3 3

mailman3 vs postfix
by Ralf Wiegand 29 Apr '20

29 Apr '20

Hello, I need some help to get the postfix part to work right. Because this is a test setup I don't really send any emails out. How can I create a admin login account without email verification? Thank you, best regards Ralf Wiegand

2 9

Fwd: [GNC-dev] Passwords are Confidential
by flywire 29 Apr '20

29 Apr '20

Looking forward to Mailman 3. How can I get an indication of when Mailman 3 code is likely to run on Fedora 29? On Sun, Apr 26, 2020 at 1:42 AM Mark Sapiro wrote: > On 4/25/20 2:08 AM, flywire wrote: > > MailMan version 2.1.29 > > > > On Sat, Apr 25, 2020 at 6:08 PM Adrien Monteleone wrote: > > > > You can turn off the reminder in your mailman settings. > > > > As this is part of the mailman code, perhaps a bug report to them > > would be in order concerning the storage issue. > > > > Regards, > > Adrien > > > > > On Apr 24, 2020 w17d115, at 11:29 PM, flywire > > > > > > My password is confidential so please don't email it to me in > > plain text. > > > Don't even store it, instead encrypt what I entered and store that > > so you > > > can verify an encrypted version of the password I enter in the > future. > > > This is a well known, long standing issue which will not be fixed in > Mailman 2.1. See <https://bugs.launchpad.net/mailman/+bug/265179> > > It is fixed in Mailman 3. > > -- > Mark Sapiro > Derek Atkins 2020-04-25 18:32:15 EDT Code runs Fedora 29. Mailman 3 isn't available on F29. When code gets upgraded, mailman will be upgraded. As for turning off the reminder; you can turn it off yourself. Thank you.

2 1

having issues with EMAIL_HOST =
by Ralf Wiegand 28 Apr '20

28 Apr '20

python manage.py runserver 0.0.0.0:8000 Traceback (most recent call last): File "manage.py", line 10, in <module> execute_from_command_line(sys.argv) File "/opt/mailman/venv-3.6/lib64/python3.6/site-packages/Django-2.2.12-py3.6.egg/django/core/management/__init__.py", line 381, in execute_from_command_line utility.execute() File "/opt/mailman/venv-3.6/lib64/python3.6/site-packages/Django-2.2.12-py3.6.egg/django/core/management/__init__.py", line 325, in execute settings.INSTALLED_APPS File "/opt/mailman/venv-3.6/lib64/python3.6/site-packages/Django-2.2.12-py3.6.egg/django/conf/__init__.py", line 79, in __getattr__ self._setup(name) File "/opt/mailman/venv-3.6/lib64/python3.6/site-packages/Django-2.2.12-py3.6.egg/django/conf/__init__.py", line 66, in _setup self._wrapped = Settings(settings_module) File "/opt/mailman/venv-3.6/lib64/python3.6/site-packages/Django-2.2.12-py3.6.egg/django/conf/__init__.py", line 157, in __init__ mod = importlib.import_module(self.SETTINGS_MODULE) File "/usr/lib64/python3.6/importlib/__init__.py", line 126, in import_module return _bootstrap._gcd_import(name[level:], package, level) File "<frozen importlib._bootstrap>", line 994, in _gcd_import File "<frozen importlib._bootstrap>", line 971, in _find_and_load File "<frozen importlib._bootstrap>", line 955, in _find_and_load_unlocked File "<frozen importlib._bootstrap>", line 665, in _load_unlocked File "<frozen importlib._bootstrap_external>", line 674, in exec_module File "<frozen importlib._bootstrap_external>", line 781, in get_code File "<frozen importlib._bootstrap_external>", line 741, in source_to_code File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/opt/mailman/mailman-suite/mailman-suite_project/settings.py", line 286 EMAIL_HOST = ‘mail.somedomain.org’ ^ SyntaxError: invalid character in identifier Mark - I don't want to complain all the time, but it is a nightmare to install and setup mailman3. Any idea why I am getting the above message? Thank You, Ralf Wiegand

2 1

hyperkitty web site
by Gelpi Andrea 28 Apr '20

28 Apr '20

Hi, after importing old mm2 messages into mm3 archive I found that hyperkitty dos not show the lists index in home page if FILTER_VHOST = True https://website/mailman3/hyperkitty/ show an empty lists. If I add list/list@domain1 I can see the archive. I think the problem is the domain name example.com that I saw in the upper left corner. If in django administration I rename that site it works. But having more than one domain this is not a solution. what i need is to separate different domains https:/website1/mailman3/hyperkitty shows some lists https:/website2/mailman3/hyperkitty shows other lists Where am I wrong? What have I to change in hyperkitty to have the correct domain shown? Is there a documentation to configure that? Hyperkitty version is 1.2.2 Thank you. -- Gelpi ing. Andrea -------------------------------------------------------------- It took the computing power of three C-64s to fly to the Moon. It takes a 486 to run Windows 95. Something is wrong here. --------------------------------------------------------------

3 4