January 2020 - Mailman-users - lists.mailman3.org

Mailman runners missing - nothing in logs
by Torge Riedel 19 Jan '20

19 Jan '20

Hi, since migration from mailman2 to mailman3 I had twice the following, last time today: When sending a mail to a list I get the following reply from postfix after a while: connect to 127.0.0.1[127.0.0.1]:8024: Connection refused Searched on that and found some posts, where the following shell command is named to check what is running: ps -fwwu mailman And I get this as output: UID PID PPID C STIME TTY TIME CMD mailman 1166 1 0 Jan07 ? 00:00:01 /opt/mailman/core/venv/bin/python3 /opt/mailman/core/venv/bin/master -C /opt/mailman/core/mailman.cfg mailman 1180 1166 0 Jan07 ? 00:03:09 /opt/mailman/core/venv/bin/python3 /opt/mailman/core/venv/bin/runner -C /opt/mailman/core/mailman.cfg --runner=rest:0:1 mailman 1212 1180 0 Jan07 ? 00:01:10 /opt/mailman/core/venv/bin/python3 /opt/mailman/core/venv/bin/runner -C /opt/mailman/core/mailman.cfg --runner=rest:0:1 mailman 11039 11036 0 06:25 ? 00:00:03 /usr/bin/uwsgi-core --ini mailman3.ini mailman 11064 11039 0 06:25 ? 00:00:00 /usr/bin/uwsgi-core --ini mailman3.ini mailman 11065 11039 0 06:25 ? 00:00:01 /usr/bin/uwsgi-core --ini mailman3.ini mailman 17257 1180 0 Jan12 ? 00:00:37 /opt/mailman/core/venv/bin/python3 /opt/mailman/core/venv/bin/runner -C /opt/mailman/core/mailman.cfg --runner=rest:0:1 Lots of expected runners are missing. After restarting the service the output of the same command is: UID PID PPID C STIME TTY TIME CMD mailman 11039 11036 0 06:25 ? 00:00:03 /usr/bin/uwsgi-core --ini mailman3.ini mailman 11064 11039 0 06:25 ? 00:00:00 /usr/bin/uwsgi-core --ini mailman3.ini mailman 11065 11039 0 06:25 ? 00:00:01 /usr/bin/uwsgi-core --ini mailman3.ini mailman 14430 1 13 14:50 ? 00:00:01 /opt/mailman/core/venv/bin/python3 /opt/mailman/core/venv/bin/master -C /opt/mailman/core/mailman.cfg mailman 14434 14430 18 14:50 ? 00:00:01 /opt/mailman/core/venv/bin/python3 /opt/mailman/core/venv/bin/runner -C /opt/mailman/core/mailman.cfg --runner=archive:0:1 mailman 14435 14430 20 14:50 ? 00:00:01 /opt/mailman/core/venv/bin/python3 /opt/mailman/core/venv/bin/runner -C /opt/mailman/core/mailman.cfg --runner=bounces:0:1 mailman 14436 14430 18 14:50 ? 00:00:01 /opt/mailman/core/venv/bin/python3 /opt/mailman/core/venv/bin/runner -C /opt/mailman/core/mailman.cfg --runner=command:0:1 mailman 14437 14430 17 14:50 ? 00:00:01 /opt/mailman/core/venv/bin/python3 /opt/mailman/core/venv/bin/runner -C /opt/mailman/core/mailman.cfg --runner=in:0:1 mailman 14438 14430 17 14:50 ? 00:00:01 /opt/mailman/core/venv/bin/python3 /opt/mailman/core/venv/bin/runner -C /opt/mailman/core/mailman.cfg --runner=lmtp:0:1 mailman 14439 14430 17 14:50 ? 00:00:01 /opt/mailman/core/venv/bin/python3 /opt/mailman/core/venv/bin/runner -C /opt/mailman/core/mailman.cfg --runner=nntp:0:1 mailman 14440 14430 19 14:50 ? 00:00:01 /opt/mailman/core/venv/bin/python3 /opt/mailman/core/venv/bin/runner -C /opt/mailman/core/mailman.cfg --runner=out:0:1 mailman 14441 14430 20 14:50 ? 00:00:01 /opt/mailman/core/venv/bin/python3 /opt/mailman/core/venv/bin/runner -C /opt/mailman/core/mailman.cfg --runner=pipeline:0:1 mailman 14442 14430 20 14:50 ? 00:00:01 /opt/mailman/core/venv/bin/python3 /opt/mailman/core/venv/bin/runner -C /opt/mailman/core/mailman.cfg --runner=rest:0:1 mailman 14443 14430 17 14:50 ? 00:00:01 /opt/mailman/core/venv/bin/python3 /opt/mailman/core/venv/bin/runner -C /opt/mailman/core/mailman.cfg --runner=retry:0:1 mailman 14444 14430 17 14:50 ? 00:00:01 /opt/mailman/core/venv/bin/python3 /opt/mailman/core/venv/bin/runner -C /opt/mailman/core/mailman.cfg --runner=virgin:0:1 mailman 14445 14430 18 14:50 ? 00:00:01 /opt/mailman/core/venv/bin/python3 /opt/mailman/core/venv/bin/runner -C /opt/mailman/core/mailman.cfg --runner=digest:0:1 So now back to good. I checked all the logs prior to restarting the service in directory /opt/mailman/var/log, but I do not see any errors. And the master was still running, I would expect that the master will start / restart a runner in case it died? Fun fact: First time of this problem was two weeks from now, which was two weeks after migration to mailman3. I'm excited if it will happen in two weeks again. Installed packages for core: mailman (3.3.0) mailman-hyperkitty (1.1.0) Any suggestions where I should have a deeper look and maybe find the root cause of this problem? Thanks in advance Torge

2 2

Another set of new releases
by Abhilash Raj 19 Jan '20

19 Jan '20

Hi Everyone, Hope everyone had a great weekend! I am pleased to announce new set of releases: - Postorius 1.3.2 - Django-mailman3 1.3.2 - Hyperkitty 1.3.2 This release was required as it turned out 1.3.1 releases did not includes translations in the tarballs that I created and uploaded to PyPI. They do include a couple of bugfixes and more translations. - Hyperkitty (https://hyperkitty.readthedocs.io/en/latest/news.html#id1) - Postorius (https://postorius.readthedocs.io/en/latest/news.html#id1) All three of these releases also officially drop support for Django 1.11. Although, there hasn't been any code change that breaks compatibility with 1.11. It has just been dropped form our CI machinery since our dependencies no longer support 1.11. All the releases are available on PyPI, as usual! -- Thanks Abhilash Raj

2 3

Settings for https support
by Dieter Leupold 16 Jan '20

16 Jan '20

Hi, I configured Postorius (via Apache2) to use https, which looks fine. But the connection to hyperkitty failed with "code 400, message Bad request syntax". I tried serveral settings....without success. Could you give me an example, which settings are to configure? Thanks for your help! -- Dieter

2 1

Mailman shell tutorial
by andrew.bernard＠gmail.com 15 Jan '20

15 Jan '20

is there a tutorial or some examples for using the mailman shell? Is there detailed documentation on it? Anything I try to do such as the following fails: $ mailman shell Welcome to the GNU Mailman shell >>> command('mailman shell --details') Traceback (most recent call last): File "<console>", line 1, in <module> NameError: name 'command' is not defined >>> I execute the shell as user mailman and from within the same venv that all the programs run under.

4 5

Adding a domsin
by Allan Hansen 13 Jan '20

13 Jan '20

Hi all, I’m still working on setting up my lists in a domain that was added after MM3 installation. It’s mostly working but the Postorius page and the ‘noreply’ emails still sport the old domain name. I hav looked at all the py and cfg files where the old name appeared, and they no longer hold the old name. My coadmin now tells me that the database has a table with the old name. Any suggestion as to whether that can cause the issue and if it’s safe to change the table. Yours, Allan Hansen P.O. Box 2423 Cypress, CA 90630

3 3

Cannot setup HTTPS support for mailman3-web
by jean-christophe manciot 11 Jan '20

11 Jan '20

Ubuntu 20.04 mailman3 3.2.2-1 mailman3-web 0+20180916-10 python3-django 2:2.2.9-2ubuntu1 In ```/etc/mailman3/uwsgi.ini``` (example.org is defined in the local /etc/hosts as 10.0.0.1): ``` [uwsgi] # Port on which uwsgi will be listening. ### suwsgi: uwsgi protocol over TLS uwsgi-socket = example.org:8430 # https://uwsgi-docs.readthedocs.io/en/latest/HTTPS.html?highlight=ssl https = /etc/ssl/example.org.crt,/etc/ssl/example.org_rsakey.pem.decrypted,HIGH ... # Drop privileges and don't run as root. uid = www-data gid = www-data ... ``` I suppose that uwsgi reads the certificate & its private key before dropping root privileges. Right now, uwsgi cannot access them as ```www-data```. In ```/etc/mailman3/mailman-web.py``` (symlinked to django settings.py) : ``` ... SECURE_PROXY_SSL_HEADER = ('HTTP_X_FORWARDED_PROTO', 'https') SECURE_PROXY_SSL_HEADER = ('HTTP_X_FORWARDED_SCHEME', 'https') # Other security settings # SECURE_SSL_REDIRECT = True # If you set SECURE_SSL_REDIRECT to True, make sure the SECURE_REDIRECT_EXEMPT # contains at least this line: # SECURE_REDIRECT_EXEMPT = [ # "archives/api/mailman/.*", # Request from Mailman. # ] # SESSION_COOKIE_SECURE = True # SECURE_CONTENT_TYPE_NOSNIFF = True # SECURE_BROWSER_XSS_FILTER = True # CSRF_COOKIE_SECURE = True # CSRF_COOKIE_HTTPONLY = True # X_FRAME_OPTIONS = 'DENY' ... POSTORIUS_TEMPLATE_BASE_URL = 'https://example.org:8430' ``` In ```/etc/nginx/sites-enabled/example.org.conf``` ``` ... location / { include /etc/nginx/uwsgi_params; # upstream app server uwsgi_pass suwsgi://example.org:8430; } ``` uwsgi is listening on the right address/port: ``` # networks-list-connections.sh | grep :8430 tcp 0 0 10.0.0.1:8430 0.0.0.0:* LISTEN 33 54336045 1768187/uwsgi ``` Despite those settings and all the relevant systemd services restarted, I get ```502 Bad Gateway``` while browsing to ```https://example.org/postorius/lists/?all-lists``` (or any other page) with the following error nginx message: ``` *1 peer closed connection in SSL handshake while SSL handshaking to upstream, client: 10.0.0.1, server: example.org, request: "GET /postorius/lists/?all-lists HTTP/2.0", upstream: "suwsgi://10.0.0.1:8430", host: "example.org", referrer: "https://example.org/postorius/lists/" ``` Of course, without those specific https/suwsgi settings, everything works fine. What am I missing/doing incorrectly? Does uwsgi need access to the certificate/private key while running as non-root for instance?

3 3

Default values for new lists
by Sten Aus 11 Jan '20

11 Jan '20

Hi I haven't found out where I could choose or edit default list values (when creating new list). For example I would like that all new lists would be with *private archive* (and change this when it is needed). This is great that I can choose not to advertise list in Index (which I can choose from list creation interface) but I would like to choose other options too. Right now only solution is to create list and then choose Archiving and then select "private archives". Another thing is that I would like to choose default subscription policy to "Moderate". If anyone has encountered this problem, let me know! All the best Sten

4 5

bounce processing on this list
by Mark Sapiro 09 Jan '20

09 Jan '20

I have just installed the latest Mailman core for this list. This version now actually processes bounces. As a result of the huge backlog of unprocessed, queued bounces, some members may receive one or more bounce probe messages. As long as the probes don't bounce, your subscription will be unaffected and you can ignore the probe message. Sorry for the noise. Hopefully it's just a one time catch-up. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

1 0

FILTER_VHOST for 3.2.1 not working after install
by Élodie BOSSIER 08 Jan '20

08 Jan '20

Hello, I'm using Mailman 2.1.29 since several years and all was perfect except the virtual_host which was "faked" : it was possible to have several mailing list by domain linked to their own domain and url but not same mailing list name for multiple domains. Example (with lighttpd) : - at http://ml.bossier.fr/listinfo we can see ONLY mailing list "test2@", "Test3@" and "Test4@" for @ml.bossier.fr - and at http://ml.franceserv.fr/listinfo we can see ONLY mailing list "bar@", "newsletter@" and "test@" for @ml.franceserv.fr Each url_host have their "own" mailing list. It's the main reason I would like migrate and use Mailman 3 and be able to have "test(a)ml.bossier.fr" and "test(a)ml.franceserv.fr". So I installed Mailman 3.2.1 and I have set "FILTER_VHOST = True" into /etc/mailman3/mailman-web.py then : mailman create --language fr --owner admin(a)franceserv.fr --domain test(a)ml.franceserv.fr mailman create --language fr --owner admin(a)franceserv.fr --domain test2(a)ml.bossier.fr And I have this result (with nginx as front) : - at http://ml.franceserv.fr:81/postorius/lists/ we can see mailing list "test(a)ml.franceserv.fr and test2(a)ml.bossier.fr" - and at http://ml.bossier.fr:81/postorius/lists/ we can see mailing list "test(a)ml.franceserv.fr and test2(a)ml.bossier.fr" (same result) And it's my problem, I would like be able to see the linked mailing list to their own url. I would like with Mailman 3.2.1 see into : - "example1.com/postorius/lists/" only the mailing list related to example1, - and into "example2.com/postorius/lists/" only the mailing list related to example2 as Mailman 2.1.x do it. I don't understand what I missed, could you help me please ? Best regards, Élodie PS. Sorry for my english language I'm french.

2 1

Migration from 2.1 to 3
by brunol＠agro.uba.ar 08 Jan '20

08 Jan '20

Hi, I am in the process to migrate an old 2.1 installation to 3.2.1 (Debian 10.1) Following the 2.1 to 3 docs: - Create a new list - Use the import21 command The command runs successfully (at least no errors in stdout). There is a problem when sending an email to the newly imported list, the message never get send to the members. I do get moderation emails, and if i do a mass subscribe, the welcome email is received by the new members. In a fresh 3 new list (not imported from 2.1) this does not happen. I already tried looking for clues in the logs [logging.smtp] path: debug.log level: debug [logging.smtp-failure] path: debug.log level: debug [logging.error] path: debug.log level: debug But i haven't seen anything useful yet. Any hints on this?

4 14