July 2018 - Mailman-users - lists.mailman3.org

How to get Mailman core to provide more debug info in a running environment
by Henrik Rasmussen 03 Jan '19

03 Jan '19

Docker-mailman 0.1.1 I am using Mailman 3.1 in production and I am trying to debug a problem[1] so I tried to setting Mailman to provide more debug info in the smtp.log file[2]. I might have been doing it wrong, but in the mailman-extra.cfg I set [logging.smtp-failure] path: smtp.log and restarted Mailman, which stopped incoming mails until removing the added section. What is the correct way to get Mailman to provide more debug info in the smtp.log 1) https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… 2) http://mailman.readthedocs.io/en/latest/src/mailman/config/docs/config.html… Henrik Rasmussen

4 5

Templates
by David Krantz 19 Dec '18

19 Dec '18

Hi. How do I set a template for one specific list? I want one list to have a special footer template. I have tried updating the database (template table) without effect so apparently the database is not used for templates or some kind of fallback is used to set it to the generic footer. Of course I also tried to restart mailman after that operation to try to rule out any caching-related problem. I want to use a file://-path as that is the least painful way of doing it. I also would like a solution to place a file in a special location. My current templates are in a .../var/templates/site/en/ structure with names like list:member:generic:footer.txt Cheers // David

4 14

Whitelist non subscriber
by Mark Ziranski 27 Aug '18

27 Aug '18

Hello, I want to whitelist an email address on all lists to bypass moderation. The email address is not a subscriber. On google I found accept_these_nonmembers but I do not know how to use it. Please show me some examples how to whitelist someone(a)example.org. Thanks in advance. M.Z.

4 6

Re: Mailman 3 Keeps Forgettings Imported Lists
by Ryan McClung 31 Jul '18

31 Jul '18

I do see the output of the script and it shows the mailing lists being created. If you put "${VARIABLE}"@domain.com it outputs correctly. Also, to that end, the output of lists changes depending on which directory I am in which makes 0 sense. On Tue, Jul 31, 2018 at 3:27 PM Ryan McClung <rmcclung(a)afilias.info> wrote: > I do see the output of the script and it shows the mailing lists being > created. If you put "${VARIABLE}"@domain.com it outputs correctly. > > On Tue, Jul 31, 2018 at 3:22 PM Mark Sapiro <mark(a)msapiro.net> wrote: > >> On 07/31/2018 07:04 AM, Ryan McClung wrote: >> > Scratch that. Ran with the corrected script and getting the following: >> > [root@mailman3(stg) archives]# mailman lists >> > No matching mailing lists found >> > >> > Any thoughts? >> >> This >> >> > for DIR in $DIRS; do mailman create "${DIR}"; mailman import21 "${DIR}"@ >> afilias.info "${DIR}"/config.pck; >> >> is still wrong. The list name for mailman create needs to be fully >> qualified as in >> >> > for DIR in $DIRS; do mailman create ${DIR}(a)afilias.info; mailman >> import21 ${DIR}(a)afilias.info ${DIR}/config.pck; >> >> (Do you look at the output from your script?) >> >> -- >> Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, >> San Francisco Bay Area, California better use your sense - B. Dylan >> _______________________________________________ >> Mailman-users mailing list -- mailman-users(a)mailman3.org >> To unsubscribe send an email to mailman-users-leave(a)mailman3.org >> https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org/ >> > > > -- > > Ryan McClung > Systems Administrator @ Afilias Canada > A. 204-4141 Yonge Street, Toronto, ON, Canada, M2P 2A8 > <https://maps.google.com/?q=4141+Yonge+Street,+Toronto,+ON,+Canada,+M2P+2A8&…> > W. www.afilias.info > T. +1.416.646.3304 x4186 > -- Ryan McClung Systems Administrator @ Afilias Canada A. 204-4141 Yonge Street, Toronto, ON, Canada, M2P 2A8 <https://maps.google.com/?q=4141+Yonge+Street,+Toronto,+ON,+Canada,+M2P+2A8&…> W. www.afilias.info T. +1.416.646.3304 x4186

2 3

Mailman 3 Keeps Forgettings Imported Lists
by Ryan McClung 31 Jul '18

31 Jul '18

GNU Mailman 3.2.0 (La Villa Strangiato) Python 3.6.5 (default, Apr 10 2018, 17:08:37) [GCC 4.8.5 20150623 (Red Hat 4.8.5-16)] config file: /opt/mailman/var/etc/mailman.cfg db url: sqlite:////opt/mailman/var/data/mailman.db devmode: DISABLED REST root url: http://localhost:8001/3.1/ Shortly after I run an import on a bunch of lists they all disappear. [root@mailman3(stg) mailman]# mailman lists No matching mailing lists found I have 30+ lists. Any thoughts? -- Ryan McClung Systems Administrator @ Afilias Canada A. 204-4141 Yonge Street, Toronto, ON, Canada, M2P 2A8 <https://maps.google.com/?q=4141+Yonge+Street,+Toronto,+ON,+Canada,+M2P+2A8&…> W. www.afilias.info T. +1.416.646.3304 x4186

2 4

mailman command to remove members
by Asaf Ohayon 31 Jul '18

31 Jul '18

Is there command like mailman members --add, to mass-remove members from a list ? Thanks

2 1

Autorespond postings: does not seem to work on 3.2?
by Asaf Ohayon 29 Jul '18

29 Jul '18

Hello Maybe I'm not understanding the meaning of this setting correctly, When I set this, I don't see any extra emails going out when I'm posting to the list Thanks

2 1

MM3 installation recommendation: Docker or individual components?
by Tom Browder 28 Jul '18

28 Jul '18

I want to install MM3 on a virgin host running Debian 9. I want to minimize problems as bugs are fixed and necessary upgrades are published. I will use PostgreSQL, nginx, and Postfix, and am reasonably competent runnng my own remote server (full control, hard iron server, not virtual). The host will only serve mail to the public and nothing else (no websites, no other users). I did run a successful MM2 site (thanks to Mark’s copious and gracious help!) for a couple of years from 2011 to 2013, so I’m no stranger to some of the MM3 jargon. I have been running Apache 2.4+ with 10+ virtual https websites since 2010. I use Letsencrypt certificates for all of them. I have no experience with Docker, Django, or nginx. Should I choose the Docker method or individual compnent installation? I realize this is an open ended and very subjective request, but I would appreciate any advice. Best regards, -Tom

2 2

Re: [Mailman-Developers] Container Images for Mailman 3.2 release
by Abhilash Raj 27 Jul '18

27 Jul '18

On Fri, Jul 27, 2018, at 1:16 PM, Kamran Soomro wrote: > Hi Abhilash, > > This is great. Thank you very much. Might I make a small suggestion? I > think it might be less confusing to use tags for your images that > conform to the mailman release. E.g. 3.2 should contain mailman 3.2, 3.3 > should contain mailman 3.3 etc. At the moment it’s hard to tell which > image contains which release. Sounds like a good idea! I will push 3.2 tags as soon as I can! > > Just my two cents. > > –Kamran > > > On 27 Jul 2018, at 21:08, Abhilash Raj <maxking(a)asynchronous.in> wrote: > > > > Hi All, > > > > I have updated and pushed releases for Container Images with 3.2 release of the suite. > > > > They are available at: > > > > docker.io/maxking/mailman-web:0.2 > > docker.io/maxking/mailman-core:0.2 > > > > A similar copy of both is also available at quay: > > > > quay.io/maxking/mailman-web:0.2 > > quay.io/maxking/mailman-core:0.2 > > > > The releases contain the following versions of components: > > > > mailman-core: > > - Mailman Core 3.2.0 > > - Mailman-hyperkitty 1.1.0 > > > > mailman-web: > > - Postorius 1.2.1 > > - Hyperkitty 1.2.0 > > - Django-mailman3 1.2.0 > > - MailmanClient 3.2.0 > > > > The upgrade process from 0.1 release should be relative painless, except for the full-text index, which needs to be rebuilt due to the migration from Python 2 to 3 of the full-text indexing library whoosh. You can run the following commands to do so, after the upgrade: > > > > $ docker exec -it mailman-web bash > > bash # python manage.py rebuild_index > > > > If you are not using the default docker-compose.yaml file provided in the repo, you need to add an extra environment variable for mailman-web container, POSTORIUS_TEMPLATE_BASE_URL, which defaults to `http://mailman-web:8000`. It should be the URL where your mailman-web container is listening on with HTTP (port 8000 by default). > > > > The rolling releases are not being rolled out right everyday now, because of broken build scripts. I'd recommend everyone use the new stable releases that I mentioned above. Going forward, I'll try to release stable versions more often, so that there isn't any need for rolling version, but fixing the rolling releases is on my TODO. > > > > Documentation for these images is available at: > > > > https://github.com/maxking/docker-mailman > > > > -- > > thanks, > > Abhilash Raj (maxking) > > _______________________________________________ > > Mailman-Developers mailing list -- mailman-developers(a)python.org > > To unsubscribe send an email to mailman-developers-leave(a)python.org > > https://mail.python.org/mm3/mailman3/lists/mailman-developers.python.org/ > > Mailman FAQ: https://wiki.list.org/x/AgA3 > > > > Security Policy: https://wiki.list.org/x/QIA9 -- thanks, Abhilash Raj (maxking)

1 0

Container Images for Mailman 3.2 release
by Abhilash Raj 27 Jul '18

27 Jul '18

Hi All, I have updated and pushed releases for Container Images with 3.2 release of the suite. They are available at: docker.io/maxking/mailman-web:0.2 docker.io/maxking/mailman-core:0.2 A similar copy of both is also available at quay: quay.io/maxking/mailman-web:0.2 quay.io/maxking/mailman-core:0.2 The releases contain the following versions of components: mailman-core: - Mailman Core 3.2.0 - Mailman-hyperkitty 1.1.0 mailman-web: - Postorius 1.2.1 - Hyperkitty 1.2.0 - Django-mailman3 1.2.0 - MailmanClient 3.2.0 The upgrade process from 0.1 release should be relative painless, except for the full-text index, which needs to be rebuilt due to the migration from Python 2 to 3 of the full-text indexing library whoosh. You can run the following commands to do so, after the upgrade: $ docker exec -it mailman-web bash bash # python manage.py rebuild_index If you are not using the default docker-compose.yaml file provided in the repo, you need to add an extra environment variable for mailman-web container, POSTORIUS_TEMPLATE_BASE_URL, which defaults to `http://mailman-web:8000`. It should be the URL where your mailman-web container is listening on with HTTP (port 8000 by default). The rolling releases are not being rolled out right everyday now, because of broken build scripts. I'd recommend everyone use the new stable releases that I mentioned above. Going forward, I'll try to release stable versions more often, so that there isn't any need for rolling version, but fixing the rolling releases is on my TODO. Documentation for these images is available at: https://github.com/maxking/docker-mailman -- thanks, Abhilash Raj (maxking)

1 0