April 2018 - Mailman-users - lists.mailman3.org

Find a smtp server to send out emails
by Leon March 12, 2025

March 12, 2025

Hi, This problem is not caused by mailman, but I still want to give it a shot here. I'm hosting a mailing list on top of mailman3. Emails are supposed to be sent out by AWS ses. However, ses requires that sender address must be verified, which leads to a problem that emails sent by subscribers to mailing list cannot be sent to other subcirbers, since their addresses are not verified. And it is impossible to verified every subscriber. Are there smtp service providers allowing unverified email address to send out emails, or do I have other solutions? Thanks. -- Best wishes, Leon

4 3

Display the last post time for a list or all lists.
by Henrik Rasmussen Aug. 9, 2024

Aug. 9, 2024

Does Mailman 3 have something similar to https://www.msapiro.net/scripts/last_post.py displaying the last post time for a list or all lists?

3 4

[MM3-users]Is it possible to grant all users the ability to Create List
by Carrie Knox July 13, 2021

July 13, 2021

Hello, Our company is evaluating mailman3 as an option for company internal list serving. One of the requirements is that anyone with access to the list server be allowed to create and manage lists. Is this possible? If so, how? Is there a "create list" role that can be added for all registered users? Thanks

5 5

Default values for new lists
by Sten Aus Jan. 11, 2020

Jan. 11, 2020

Hi I haven't found out where I could choose or edit default list values (when creating new list). For example I would like that all new lists would be with *private archive* (and change this when it is needed). This is great that I can choose not to advertise list in Index (which I can choose from list creation interface) but I would like to choose other options too. Right now only solution is to create list and then choose Archiving and then select "private archives". Another thing is that I would like to choose default subscription policy to "Moderate". If anyone has encountered this problem, let me know! All the best Sten

4 5

MM3 shunting mails
by Anders Nilsson Jan. 3, 2020

Jan. 3, 2020

I'm running a Mailman 3.1.0 installation on a CentOS 7 machine. Using RPMs from https://repos.fedorapeople.org/repos/abompard/hyperkitty/el-7/x86_64/ I do have problems with some lists occasionally going into some kind of shunt mode, where alla mails sent to them gets shunted. In the Mailman log I get entries for each shunted email: Mar 17 11:54:11 2017 (6217) Uncaught runner exception: Multiple rows were found for one_or_none() Mar 17 11:54:11 2017 (6217) Traceback (most recent call last): File "/usr/lib/python3.4/site-packages/mailman/core/runner.py", line 171, in _one_iteration self._process_one_file(msg, msgdata) File "/usr/lib/python3.4/site-packages/mailman/core/runner.py", line 264, in _process_one_file keepqueued = self._dispose(mlist, msg, msgdata) File "/usr/lib/python3.4/site-packages/mailman/runners/pipeline.py", line 37, in _dispose process(mlist, msg, msgdata, pipeline) File "/usr/lib/python3.4/site-packages/mailman/core/pipelines.py", line 53, in process handler.process(mlist, msg, msgdata) File "/usr/lib/python3.4/site-packages/mailman/handlers/rfc_2369.py", line 121, in process process(mlist, msg, msgdata) File "/usr/lib/python3.4/site-packages/mailman/handlers/rfc_2369.py", line 70, in process archiver_set = IListArchiverSet(mlist) File "/usr/lib/python3.4/site-packages/zope/component/hookable.py", line 33, in __call__ return self.__implementation(*args, **kw) File "/usr/lib/python3.4/site-packages/zope/component/_api.py", line 156, in adapter_hook return sitemanager.queryAdapter(object, interface, name, default) File "/usr/lib64/python3.4/site-packages/zope/interface/registry.py", line 348, in queryAdapter return self.adapters.queryAdapter(object, interface, name, default) File "/usr/lib/python3.4/site-packages/mailman/database/transaction.py", line 85, in wrapper return function(args[0], config.db.store, *args[1:], **kws) File "/usr/lib/python3.4/site-packages/mailman/model/mailinglist.py", line 607, in __init__ ListArchiver.name == archiver_name).one_or_none() File "/usr/lib64/python3.4/site-packages/sqlalchemy/orm/query.py", line 2733, in one_or_none "Multiple rows were found for one_or_none()") sqlalchemy.orm.exc.MultipleResultsFound: Multiple rows were found for one_or_none() Mar 17 11:54:11 2017 (6217) SHUNTING: 1489748051.1949184+7a59df19c81493cb419306d620376efc0e381819 And so far my Google-fu hasn't been good enough to give me any useful answers to why this happens. If I dump one of the pickles using qfile I cannot see any complaints. Most of the times, if I remove and recreate a failing list and run unshunt the shunted emails get processed and sent. Anyone seen something similar? Regards, Anders Nilsson -- Anders Nilsson, Ph.D. <andersn(a)control.lth.se> Dep. of Automatic Control, Lund University Phone: +46 (0)46 222 87 94, Fax: +46 (0)46 13 81 18 Mob: +46 (0)703 22 57 67

4 4

bounces with empty message-id
by Peter Münster Dec. 12, 2019

Dec. 12, 2019

Hi, It seems, that mailman bounces the bounces, so that the list-owner never sees them: --8<---------------cut here---------------start------------->8--- postfix/smtpd[12002]: connect from out04.smtpout.orange.fr[193.252.22.213] postfix/smtpd[12002]: 879D6F12E8: client=out04.smtpout.orange.fr[193.252.22.213] postfix/cleanup[11841]: 879D6F12E8: message-id=<> postfix/qmgr[10092]: 879D6F12E8: from=<>, size=4048, nrcpt=1 (queue active) postfix/smtpd[12002]: disconnect from out04.smtpout.orange.fr[193.252.22.213] ehlo=1 mail=1 rcpt=1 data=1 quit=1 commands=5 postfix/lmtp[11846]: 879D6F12E8: to=<test-bounces(a)my-domain.org>, relay=127.0.0.1[127.0.0.1]:8024, delay=0.05, delays=0.04/0/0/0.01, dsn=5.0.0, status=bounced (host 127.0.0.1[127.0.0.1] said: 550 No Message-ID header provided (in reply to end of DATA command)) postfix/qmgr[10092]: 879D6F12E8: removed --8<---------------cut here---------------end--------------->8--- What could I do please, to get the bounces? I would like to use VERP to identify wrong addresses... TIA for any hints, -- Peter

3 8

confirm mail rejected
by Marc Sluiter Sept. 29, 2019

Sept. 29, 2019

Hi, im trying to setup mailman and have an issue: first my environment: - I’m running postfix etc with "mailcow-dockerized": https://mailcow.github.io/mailcow-dockerized-docs/ - I’m running mailman with "docker-mailman": https://asynchronous.in/docker-mailman/ I got almost everything working (with some configuration modifications, see other mail). The only thing which doesn’t work is conformation mails, they are rejected: In the logs I see that postfix is trying both "liste-confirm+extension@domain" and "liste-confirm@domain" for another lookup map of type mysql (so "recipient_delimiter" is working), but not for the mailman map of type regexp. Just a wild guess, I didn't find anything about it: can it be that “recipient_delimiter" doesn't work for “regexp" maps? For now I worked around this issue by manually modifying the confirm regex in "postfix_lmtp” to /^liste-confirm\+.*(a)domain\.tld$/ Does anyone have an idea why the regexp map isn’t working for me and at least 1 other user (see https://gitlab.com/mailman/mailman/issues/401)? Would my workaround be a long term solution which could be implemented in mailman? That would mean that mailman could work independent of the “recipient_delimiter” setting (or do I oversee something?) Thanks and greetings, Marc

4 4

Mailman 3 Installation Assistance
by brian＠emwd.com July 26, 2019

July 26, 2019

I am making a serious attempt at installing Mailman 3 using docker. I have a CentOS 7 server setup via Linode. I am using the following documentation to setup a Mailman 3 server: https://xiaoxing.us/2018/01/02/Deploy-Mailman-3-on-AWS-using-Docker/ I have Docker, Postfix, and Nginx installed and working fine. The installation of the Mailman 3 container went fine. However I am getting the following error when I go to test Posterius via shell: curl http://172.19.199.3:8000/postorius/lists/ curl: (7) Failed connect to 172.19.199.3:8000; Connection refused I assume this has something to do with uwsgi which I have no experience with. Appreciate any assistance with getting Mailman 3 up and running. Thanks! Brian Carpenter

4 28

Auth question
by David Krantz Jan. 8, 2019

Jan. 8, 2019

Hi, I have of course activated password login as it was not possible to get the provider based logins to work (might be but not worth the time for me right now). Is there any way for an user to request a new password when it is forgotten? I presume that the Persona login is removed now. I cannot hide it in my version or at least I do not know how. cheers // David

6 25

How to get Mailman core to provide more debug info in a running environment
by Henrik Rasmussen Jan. 3, 2019

Jan. 3, 2019

Docker-mailman 0.1.1 I am using Mailman 3.1 in production and I am trying to debug a problem[1] so I tried to setting Mailman to provide more debug info in the smtp.log file[2]. I might have been doing it wrong, but in the mailman-extra.cfg I set [logging.smtp-failure] path: smtp.log and restarted Mailman, which stopped incoming mails until removing the added section. What is the correct way to get Mailman to provide more debug info in the smtp.log 1) https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… 2) http://mailman.readthedocs.io/en/latest/src/mailman/config/docs/config.html… Henrik Rasmussen

4 5

Templates
by David Krantz Dec. 19, 2018

Dec. 19, 2018

Hi. How do I set a template for one specific list? I want one list to have a special footer template. I have tried updating the database (template table) without effect so apparently the database is not used for templates or some kind of fallback is used to set it to the generic footer. Of course I also tried to restart mailman after that operation to try to rule out any caching-related problem. I want to use a file://-path as that is the least painful way of doing it. I also would like a solution to place a file in a special location. My current templates are in a .../var/templates/site/en/ structure with names like list:member:generic:footer.txt Cheers // David

4 14

Whitelist non subscriber
by Mark Ziranski Aug. 27, 2018

Aug. 27, 2018

Hello, I want to whitelist an email address on all lists to bypass moderation. The email address is not a subscriber. On google I found accept_these_nonmembers but I do not know how to use it. Please show me some examples how to whitelist someone(a)example.org. Thanks in advance. M.Z.

4 6

Mail configuration
by Darren Smith July 14, 2018

July 14, 2018

I'm not sure if this is the correct forum for this question, but I'm pretty sure if there is expertise on how to do what I want to do, it can be found here. Overview of what I am looking to do: Due to the impending shutdown (in the next 6 months) of the data center where our mailman server lives, we are being forced to move the installation. We are going to be moving it to a different location. Here is our problem... Moving things is not really a problem in and of itself - I'm confident that I can get things set up correctly elsewhere. However, our email server sends somewhere around 100,000 emails per day, and if you cut over from one IP address to another IP address, my understanding is that most ISPs will start to ban you, because they are not used to that sort of volume coming from an unknown IP. I know it would be better if we could keep the IP address, but again, due to circumstances beyond my control, this is not going to be a possibility. We have been told that "warming up" the IP is the way to go - that is, cutting over just some of the traffic a little at a time. So what I am looking for is a way for all mail on our domain to be sent to our current mailman installation, and based on some configuration (certain mailing lists?) certain emails being sent out to the list subscribers will first be forwarded to the new server and be sent from the new IP address. Does that make sense? Does anyone know a way that mailman/postfix can be configured to accomplish this? Is there a different forum where I might be able to ask experts about this? Thanks, -Darren

5 6

Mailman 3 localization
by Danil Smirnov July 5, 2018

July 5, 2018

Hi! I saw in the docs: Localization > > We have it! We just don’t have proper documentation here yet. > Could you please be more specific - can I switch Mailman 3 installation to Spanish? Regards, Danil Smirnov

7 13

Unknown attribute: max_message_size
by Thor Atle Rustad June 27, 2018

June 27, 2018

If I make changes here: https://example.com/postorius/lists/test2.example.com/settings/message_acce…, I get a warning that the Maximum Message Size field at the bottom is mandatory. However, if I put a number in that field and save, I get "Unknown attribute: max_message_size". That makes sense, since Mark states in https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message… that max_messages_size is not exposed in REST. What to do? I have Maxking mailman-docker but can easily copy files into the image if necessary. Thor

5 8

Migrate from mysql to postgresql
by Bjoern Franke June 14, 2018

June 14, 2018

Hi, is it possible to migrate a mailman3-mysql-database to a postgresql-database? I tried to convert it with pgloader, but some identifiers had to be cut off: _address_id); 2018-03-17T21:33:39.087000+01:00 WARNING PostgreSQL warning: Bezeichner idx_680560_account_emailconfirm_email_address_id_5b7f8c58_fk_account_e wird auf idx_680560_account_emailconfirm_email_address_id_5b7f8c58_fk_ac gekrzt Kind regards Bjoern

2 2

Hyperkitty Search box result in error 500
by Carlos R Laguna May 2, 2018

May 2, 2018

Hello everyone, i have being using maxking's docker images for mailman 3 without any issue this far, unfortunately recently i found a problem with the search option in the archive, if i try to search for anything i got a error 500 Hyperkkity 1.1.4 docker exec mailman-web ./manage.py update_index --verbosity 2: https://paste.ubuntu.com/p/nS9htVcxp7/ I suspect that at some point while archiving mails something went wrong, but no sure. Any idea how to fix or debug further. Thanks in advance. -- Carlos R Laguna Mendoza Subdtor. Grp Técnico Tinored Joven Club de Computación y Electrónica Tel: 52793189, 7863-3174, 7868-4230

2 1

Domain admin
by Johannes Winter April 29, 2018

April 29, 2018

Hello everybody, We would like to give our users the priviledge to create lists per domain. I Haven't found any options for that in the web interface. Is this possible somehow with mailman3? Best regards, Johannes

2 2

Rejecting held emails
by Darren Smith April 26, 2018

April 26, 2018

Hello, We recently had a phishing message make it through our spam filters and arrive at a mailing list. The good news is that since it was not from a list member it was in the held message queue. I was able to find the message in the var/messages directory by searching for a keyword in the subject. However, after rejecting the message from Postorius, the message doesn't seem to be removed from the var/messages directory. Is this expected behavior? I know that infosec people won't be too happy about a phishing email sitting around on our disk. (Infosec guys are notoriously paranoid. :) ) Is there some sort of cleanup process that would remove these messages? If not, does this pose an issue where over time disk usage will creep up? This could be a pretty significant problem if that is the case. What do you think, sirs? -Darren

2 2

Disabling Gravatar
by Marvin Gülker April 26, 2018

April 26, 2018

Hi everyone, I want to make you aware of a potential privacy problem in Mailman's Hyperkitty. Under the upcoming EU General Data Protection Regulation (GDPR)[1], which will be in force as of 2018-05-25, it is illegal to transmit data to third parties without a right to do so. Without going into the details, the inclusion of third party services into one's website is usually deemed such a transmission, and unless one has explicit consent of the user (e.g., by an optional (!), unticked ticking box) this is normally illegal (if one targets EU users). The GDPR does not affect private and family use (Art. 2(2)(c) GDPR), but the exact reach of that clause is yet to be determined; it certainly does not exclude company use of Mailman. I've found it's possible to disable the social login providers quite easily (we had this discussion here on the mailinglist recently), but I don't see an option to disable Gravatar. If there is one, please enlighten me, but anyway I want to propose this as a feature request against Hyperkitty. A GDPR-compliant implementation of Gravatar in Mailman would look like this: * In order to not transmit website visitor's data (IP address, browser info, etc) to Gravatar, Hyperkitty has to request the avatar image itself and not leave that to the user's browsers to do. In other words, the HTTP GET request needs to come from the server running Hyperkitty and the user's browser then just requests the avatar from the Hyperkitty server. Most likely easiest way to do this is to pre-download the avatar when an email is archived. * In order to not transmit the subscribers' data (email address, allows Gravatar to track the subscriber) to Gravatar illegally, the retrieval of the avatar image from Gravatar has to be disabled by default. Instead, an option needs to be added to the subscriber's control panel which he has to actively enable in order to have his Gravatar downloaded and thus used (privacy-by-default rule). I'm not saying Gravatar tracks people and sells the information gathered, though I have doubts on how Automattic makes money with the service. I'm just outlining the legal duties under the upcoming GDPR for service owners, which are independant of how Automattic processes the data in this specific case. Please don't dismiss this as some side feature not needed. The fines that can be imposed on service owners due to violation of the GDPR are very high (up to 20,000,000 € [that's 20 million euros, really]). Marvin [1]: http://eur-lex.europa.eu/legal-content/EN/TXT/?qid=1510481733260&uri=CELEX:… -- Blog: https://www.guelkerdev.de PGP/GPG ID: F1D8799FBCC8BC4F

5 5

Mailman not able to process "big" requests
by Jonas Felber April 24, 2018

April 24, 2018

Hi, We migrated from mailman2 to mailman3 a week ago. Since then we are unable to send messages the our students through the mailing list. Here are some symptoms: 1. I go to mass subscribe and subscribe 400 emails 2. I click subscribe, the browser (in my case safari) tries to load the page for a few seconds 3. The request times out 4. Once the service becomes responsible again, I see that only part of my emails got subscribed (~50 in this case). For me this really looks like the emails are sent on the "web-thread" that gets killed once the request times out. Looking at this https://gitlab.com/mailman/postorius/blob/master/src/postorius/views/list.p… <https://gitlab.com/mailman/postorius/blob/master/src/postorius/views/list.p…> seems to confirm my suspicions. Some quick overview of our infrastructure: The TCP endpoints are: browser -> haproxy in kubernetes-entry-router -> nginx in kubernetes-ingress -> nginx in mailman -> mailman We mitigated the issue by giving it more CPU power and increasing the timeouts in one of the nginx endpoints. We also have a problem with sending out emails to "large" (>50) groups, as they seem to not getting sent out at all. Do you have any idea what the problem here could be? We would be really glad if you can help us getting our mailman up and running, as I currently have to send emails out by "hand". I will happily provide you with more details about our configuration, just let me know what you need. Kind regards, Jonas Jonas Felber <jonas.felber(a)vis.ethz.ch <mailto:jonas.felber@vis.ethz.ch>> Aktuar & CTF Präsident VIS - Verein der Informatik Studierenden an der ETH Zürich CAB E 31, Universitätstr. 6, ETH Zentrum, CH-8092 Zürich https://www.vis.ethz.ch <https://www.vis.ethz.ch/>

4 4

Another interesting error...
by Darren Smith April 24, 2018

April 24, 2018

So it appears that there was a message sent to one of our mailing lists that was put into the held message queue. However, when attempting to go to the message to do the moderation, the web page returns and Error 500. Looking in the mailman log, I found this: Apr 23 14:21:02 2018 (17878) REST request handler error: Traceback (most recent call last): File "/opt/mailman3/conda/lib/python3.6/wsgiref/handlers.py", line 137, in run self.result = application(self.environ, self.start_response) File "/opt/mailman3/conda/lib/python3.6/site-packages/mailman/database/transac tion.py", line 50, in wrapper rtn = function(*args, **kws) File "/opt/mailman3/conda/lib/python3.6/site-packages/mailman/rest/wsgiapp.py" , line 214, in __call__ return super().__call__(environ, start_response) File "/opt/mailman3/conda/lib/python3.6/site-packages/falcon/api.py", line 227 , in __call__ responder(req, resp, **params) File "/opt/mailman3/conda/lib/python3.6/site-packages/mailman/rest/post_modera tion.py", line 167, in on_get resource = self._make_collection(request) File "/opt/mailman3/conda/lib/python3.6/site-packages/mailman/rest/helpers.py" , line 159, in _make_collection for resource in collection] File "/opt/mailman3/conda/lib/python3.6/site-packages/mailman/rest/helpers.py" , line 159, in <listcomp> for resource in collection] File "/opt/mailman3/conda/lib/python3.6/site-packages/mailman/rest/post_modera tion.py", line 157, in _resource_as_dict resource = self._make_resource(request.id) File "/opt/mailman3/conda/lib/python3.6/site-packages/mailman/rest/post_modera tion.py", line 100, in _make_resource make_header(decode_header(resource['subject']))) File "/opt/mailman3/conda/lib/python3.6/email/header.py", line 174, in make_he ader h.append(s, charset) File "/opt/mailman3/conda/lib/python3.6/email/header.py", line 295, in append s = s.decode(input_charset, errors) UnicodeDecodeError: 'gb2312' codec can't decode byte 0x87 in position 2: illegal multibyte sequence It LOOKS as if there might be a character in the email somewhere - possibly in the subject or sender fields? - that is somehow unexpected. I am attempting to find the held message - can someone point me where I can go to see the message so that I can see what might be causing the problem? -Darren

4 11

sass error
by Alexander Klotz April 20, 2018

April 20, 2018

Hi everybody, we tried to make a fresh installation out of the current version following the readme.md - we encounter the following error trying to do so. As mentioned elsewhere, 'sass' has been replaced by 'sassc', however, maybe somewhere there is still a reference to it that may have been overlooked? The answer to a similar error posted to this list in August 2017 unfortunately didn't help either. Any help would be appreciated! Thanks, Alex ERROR 2018-04-19 09:07:49,096 29 django.request Internal Server Error: /accounts/login/ Traceback (most recent call last): File "/usr/local/lib/python2.7/site-packages/django/core/handlers/exception.py", line 41, in inner response = get_response(request) File "/usr/local/lib/python2.7/site-packages/django/core/handlers/base.py", line 249, in _legacy_get_response response = self._get_response(request) File "/usr/local/lib/python2.7/site-packages/django/core/handlers/base.py", line 217, in _get_response response = self.process_exception_by_middleware(e, request) File "/usr/local/lib/python2.7/site-packages/django/core/handlers/base.py", line 215, in _get_response response = response.render() File "/usr/local/lib/python2.7/site-packages/django/template/response.py", line 107, in render self.content = self.rendered_content File "/usr/local/lib/python2.7/site-packages/django/template/response.py", line 84, in rendered_content content = template.render(context, self._request) File "/usr/local/lib/python2.7/site-packages/django/template/backends/django.py", line 66, in render return self.template.render(context) File "/usr/local/lib/python2.7/site-packages/django/template/base.py", line 207, in render return self._render(context) File "/usr/local/lib/python2.7/site-packages/django/template/base.py", line 199, in _render return self.nodelist.render(context) File "/usr/local/lib/python2.7/site-packages/django/template/base.py", line 990, in render bit = node.render_annotated(context) File "/usr/local/lib/python2.7/site-packages/django/template/base.py", line 957, in render_annotated return self.render(context) File "/usr/local/lib/python2.7/site-packages/django/template/loader_tags.py", line 177, in render return compiled_parent._render(context) File "/usr/local/lib/python2.7/site-packages/django/template/base.py", line 199, in _render return self.nodelist.render(context) File "/usr/local/lib/python2.7/site-packages/django/template/base.py", line 990, in render bit = node.render_annotated(context) File "/usr/local/lib/python2.7/site-packages/django/template/base.py", line 957, in render_annotated return self.render(context) File "/usr/local/lib/python2.7/site-packages/django/template/loader_tags.py", line 177, in render return compiled_parent._render(context) File "/usr/local/lib/python2.7/site-packages/django/template/base.py", line 199, in _render return self.nodelist.render(context) File "/usr/local/lib/python2.7/site-packages/django/template/base.py", line 990, in render bit = node.render_annotated(context) File "/usr/local/lib/python2.7/site-packages/django/template/base.py", line 957, in render_annotated return self.render(context) File "/usr/local/lib/python2.7/site-packages/compressor/templatetags/compress.py", line 131, in render return self.render_compressed(context, self.kind, self.mode, forced=forced) File "/usr/local/lib/python2.7/site-packages/compressor/templatetags/compress.py", line 107, in render_compressed rendered_output = compressor.output(mode, forced=forced) File "/usr/local/lib/python2.7/site-packages/compressor/css.py", line 49, in output ret.append(subnode.output(*args, **kwargs)) File "/usr/local/lib/python2.7/site-packages/compressor/css.py", line 51, in output return super(CssCompressor, self).output(*args, **kwargs) File "/usr/local/lib/python2.7/site-packages/compressor/base.py", line 295, in output output = '\n'.join(self.filter_input(forced)) File "/usr/local/lib/python2.7/site-packages/compressor/base.py", line 235, in filter_input for hunk in self.hunks(forced): File "/usr/local/lib/python2.7/site-packages/compressor/base.py", line 205, in hunks precompiled, value = self.precompile(value, **options) File "/usr/local/lib/python2.7/site-packages/compressor/base.py", line 268, in precompile return True, filter.input(**kwargs) File "/usr/local/lib/python2.7/site-packages/compressor/filters/base.py", line 229, in input return super(CachedCompilerFilter, self).input(**kwargs) File "/usr/local/lib/python2.7/site-packages/compressor/filters/base.py", line 196, in input raise FilterError(err) FilterError: /bin/sh: sass: not found

2 2

Re: Question regarding serve_from_domain
by Alexander Klotz April 20, 2018

April 20, 2018

Hi Steve, thanks for your answer - we've made a completely new installation and don't encounter this specific error anymore, so we won't need an answer for that at the moment. Best, Alex Am 20.04.18 um 09:47 schrieb Stephen J. Turnbull: > Did you ever get an answer to this? I will have some time to look > into it over the weekend (I've been away from coding in core dev for a > while, so no answer offhand), but I'd like to know if you still need > an answer before spending time on it. :-) > > Steve > > Alexander Klotz writes: > > Hello, > > > > we're currently unsure in which file the serve_from_domain-entry > > described in the readme.md regarding mailman-web. We just updated the > > docker and encounter the following error, which might correspond to the > > missing entry: > > > > OSError: [Errno 13] Permission denied: '/opt/mailman-web/fulltext_index' > > > > Any help would be appreciated - thanks! > > > > > > -- > > Regards, > > Alex Klotz > > > > (culturebase editorial staff) > -- Mit freundlichen Grüßen, Alexander Klotz (redaktion kulturserver) mailto:alexk@kulturserver.de Stiftung kulturserver.de gGmbH Lothringerstraße 23 D-52062 Aachen http://ggmbh.kulturserver.de Geschäftsführer: Wolfgang Knauff Amtsgericht Aachen* *Handelsregister-Nr.:B 10515 Umsatzsteuer-Identifikations-Nr.:DE DE 230868040

1 0

Outgoing messages fro Mailman fails DMARC
by Henrik Rasmussen April 19, 2018

April 19, 2018

I have set up Postfix to DKIM sign outgoing mails from GNU Mailman 3.2.0a1 which validates nicely ("dkim=pass (signature was verified)"), but DMARC fails ("dmarc=fail action=none") on the recipient end, probably because the "header.from=gmail.com;" (or similar) which means that DKIM d= will not match. According to dmarc.org*) "Mailing lists usually do not take authorship of the emails they relay" so I should "consider to apply specific rules for emails coming from mailing lists". Also according to dmarc.org*) Mailman (Mailman 2 that is, and I presume Mailman 3 does too) "include features to interoperate with DMARC senders". I assume that the dmarc mitigations list settings in Mailman is for incoming messages, but how do I set Mailman to cope with this on outgoing messages? Note: I have more than one list domain in Mailman 3. *) https://dmarc.org/wiki/FAQ#Is_there_special_handling_required_to_receive_DM… /Henrik

2 3