- Mailman-users - lists.mailman3.org

Non devloper needs help with MailMan
by jenny＠bublitzcreative.com 08 Apr '22

08 Apr '22

We have an old MailMan program for our 165 members. The developer has gone MIA. Is anyone interested in being our new admin and helping us update our MailMan software?

1 0

Looking for equivalent functions from mailman2
by Julian Kippels 06 Apr '22

06 Apr '22

Hi, I am currently in the process of converting all lists from our mailman2 instance to mailman3 lists. In the process I found that some of the mm2-commands that I have come to rely on are no longer available for mm3. For example, how could I get an equivalent output to what "list_owners -w" would have given me on mm2? The same goes for the old "list_members"-command. Thanks in advance Julian Kippels

2 1

NNTP support
by Philip Colmer 05 Apr '22

05 Apr '22

Hi I'm struggling to understand from the documentation what Mailman 3 supports with regards to NNTP. Does it only support sending emails to a configured news server or does it support NNTP access to itself by user client software? Thank you. Regards Philip

3 2

Active archivers and archiving and thread question.
by bob B 31 Mar '22

31 Mar '22

Digging into the mailman3 world, and want to check my logic... We normally don't use archives, so I have "archive policy" set to "Do not archive this list" for our lists. However, the "archives" button is still there on the list info page, and if users go into it, they don't see anything, But they can click "start a new thread" which sends a message to the list, but since archiving is turned off, that message does not show up there. Am I understanding that correctly? if I have "Active archivers" disabled, that hides that area from the users, correct? Any reason why these are separated? why have an active archiver, if archiving is turned off -OR- archives are turned on, but no active archiver?

2 3

New install - The Message have no valid senders
by kenneth.karlsson＠eco.cept.org 31 Mar '22

31 Mar '22

I have installed a brand spanking new Ubuntu 21.10, with postfix as SMTP server and mailman3-full apt package.. All checks out fine except when i deliver mails into MM. Mailman Core Version GNU Mailman 3.3.3 (Tom Sawyer) Mailman Core API Version 3.1 Mailman Core Python Version 3.9.7 (default, Sep 10 2021, 14:59:43) [GCC 11.2.0] I have a very simple mail command going into Postfix, and it receives it fine and relay it to MM (email address obscured below but of course a proper email address was used !): The command: EHLO contoso.com mail from: <xxx(a)xxx.com> rcpt to: <mhtest(a)list.cept.org> DATA This is a test message . Accepted by Postfix: Mar 29 11:17:17 lits01a postfix/smtpd[4088]: B86DD6A04B9: client=unknown[192.168.200.157] Mar 29 11:17:30 lits01a postfix/cleanup[4091]: B86DD6A04B9: message-id=<> Mar 29 11:17:30 lits01a postfix/qmgr[3952]: B86DD6A04B9: from=<xxx(a)xxx.com>, size=200, nrcpt=1 (queue active) Mar 29 11:17:30 lits01a postfix/lmtp[4109]: B86DD6A04B9: to=<mhtest(a)list.cept.org>, relay=127.0.0.1[127.0.0.1]:8024, delay=24, delays=24/0.01/0/0.01, dsn=2.0.0, status=sent (250 Ok) Mar 29 11:17:30 lits01a postfix/qmgr[3952]: B86DD6A04B9: removed MM receives it: Mar 29 11:17:30 2022 (3940) ('127.0.0.1', 37146) handling connection Mar 29 11:17:30 2022 (3940) ('127.0.0.1', 37146) Data: b'LHLO list.cept.org' Mar 29 11:17:30 2022 (3940) ('127.0.0.1', 37146) Data: b'MAIL FROM:<xxx(a)xxx.com>' Mar 29 11:17:30 2022 (3940) ('127.0.0.1', 37146) sender: xxx(a)xxx.com Mar 29 11:17:30 2022 (3940) ('127.0.0.1', 37146) Data: b'RCPT TO:<mhtest(a)list.cept.org>' Mar 29 11:17:30 2022 (3940) ('127.0.0.1', 37146) recip: mhtest(a)list.cept.org Mar 29 11:17:30 2022 (3940) ('127.0.0.1', 37146) Data: b'DATA' Mar 29 11:17:30 2022 (3940) ('127.0.0.1', 37146) Data: b'QUIT' Mar 29 11:17:30 2022 (3940) ('127.0.0.1', 37146) connection lost Mar 29 11:17:30 2022 (3940) Connection lost during _handle_client() But MM3 discards it: Mar 29 10:08:03 2022 (1767) DISCARD: <164854848338.1768.3954079936807939297@lits01a>; ['The message has no valid senders'] I have no idea where its goes wrong, but fear its something in the source code. Kind regards Kenneth Karlsson

2 3

Problem with redirection when entering alias without a / at the end
by Jens Günther 31 Mar '22

31 Mar '22

Hey there, I'm using Apache2 as the webserver, configured https://mailman.xyz.de as Web host. When I want to get to Mailman Starting Page now I need to Enter the following URL: https://mailman.xyz.de/mailman3/ to be directly redirected as expected to https://mailman.xyz.de/mailman3/postorius/lists/ -> works. Problem: When leave out the slash at the end and I ONLY enter the following URL: https://mailman.xyz.de/mailman3 -> then I'm wrongly redirected to a page, taht does not exist: https://mailman.xyz.de/mailman/postorius/lists/ -> 404 Where can I change this misbehaviour? In Apache-conf everything seems as it'S in the docs, for the vHost I do not have any other custom settings. Thank you in advance. By the way: Is there an easy way to redirect directly from https://mailman.xyz.de to https://mailman.xyz.de/mailman3/postorius/lists/ -> what would be a possibility for that?

4 12

Mails are stuck in Mailman Pipeline Queue
by Shashikanth Komandoor 30 Mar '22

30 Mar '22

Hi Team, I am currently running Mailman 3 with version 3.3.1 and in-built postfix version 2.10.1-6 on RHEL 7.5 with PostgreSQL 11.7 version with default values. I am almost running 2000 lists with 64 GB RAM and 8 Cores on a single VM and on which all the mailman 3 components are running. I have been running this setup in production for the past 2 years and 6 months. I have been seeing a special scenario suddenly: most of the mails that are sent to this server are going to the pipeline queue and not getting released from there. No configuration changes are done and I'm not sure why the mails are getting stuck there. I have recreated the list but no luck. Could not identify the root cause. Please help in this regard. -- Thanks & Regards, Shashi Kanth.K 9052671936

2 5

changing default preferred language of list
by Paul Paulchen 29 Mar '22

29 Mar '22

Hi MM community, need a little advise. We're running mailman in a Docker Container (maxking) Mailman Core Version GNU Mailman 3.3.5 (Tom Sawyer) Mailman Core API Version 3.1 Mailman Core Python Version 3.8.10 (default, May 6 2021, 06:30:44) [GCC 9.3.0] As far as I understood, it should be pretty easy. My wish: every new list we create has a default value for the preferred language: de (instead of us) Like described here: https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message… We put the values in: [mailman] default_language: de "/etc/mailman.cfg" and "/opt/mailman/mailman-extra.cfg" Nothing changes. When I create a new list via Postorius, is see the preferred language is US. Am I missing something? Is the default always US? And I have to change it manually? Cheers in advance! Paul

2 1

Docker-Setup: example.com in test mails
by Bjoern Franke 29 Mar '22

29 Mar '22

Hi, we are running a docker setup with mailman-web and mailman-core. To our confusion, test mails testing for bounces are sent from example.com From: Mailman <mailman(a)example.com> To: Mailman Bounces <mailman-bounces(a)example.com> instead of the list domain and are therefore often considered as spam. The list domain should be lists.ffnw.de. Did I miss some setting? Best Regards Bjoern

3 7

users leaking across virtual hosts
by Stanisław Findeisen 25 Mar '22

25 Mar '22

Hi We are hosting several virtual hosts (mail host : web host is a 1:1 mapping with identical names), works fine, but it looks user accounts are somehow global, i.e. registering a new user in a new virtual host doesn't work if the user name or e-mail address are already in use in another virtual host. This happens on the Hyperkitty sign-up page: /accounts/signup/ , with the errors being "A user is already registered with this e-mail address." and "A user with that username already exists.". I am assuming this is a well-known limitation, which would require a serious internal redesign to fix; correct? I was able to successfully login in the browser to a vhost using my user credentials from the original vhost (the one where the account was created) (the password was not auto-filled, of course, because of a different domain name). But how safe is this? How about subscribing to lists, posting etc.? Is this going to mess things up somehow? Thanks Stanisław

2 1