- Mailman-users - lists.mailman3.org

Unsubscribe Notifications Clarification
by Brian Carpenter 03 Sep '20

03 Sep '20

I am trying to understand how Mailman 3 handles unsubscribe notifications. From my testing I see the following behavior: 1. If list member sends email to listname-leave@listname, an unsubscribe notification is sent to both list owner and list member if list settings have them enabled. 2. If list list member is a registered user of Postorius and he uses Postorius to unsubscribe, then no notification is sent out to either list owner or list member, even if list settings has unsubscribe notifications enabled. Is this correct? Brian

2 2

adding imprint / private policy link to postorius
by Thomas Stein 03 Sep '20

03 Sep '20

Hello one and all. Is it possible to add an imprint link to the postorius start page? I guess it is, but it would be nice if someone could me point to the right direction / documentation. Something like they have: https://lists.openrailwaymap.org/mailman3/postorius/lists/ cheers, t.

2 2

Timeout in Postorius when trying to approve or reject moderated messages
by Sebastian Hagedorn 30 Aug '20

30 Aug '20

Hi, I just set up a new Mailman 3 Suite installation (GNU Mailman 3.3.1 (Tom Sawyer)) on CentOS 7 using the virtualenv installation guide: https://docs.mailman3.org/en/latest/install/virtualenv.html I encountered a few issues, but I was able to resolve all of them, I think. All three components of the suite are up and running. The backend is a MariaDB database, the frontend is Apache with mod_wsgi. I can send messages to the server, and they are delivered to list members. One thing that I can't figure out is why I can't approve or reject messages that are held for moderation. In case it matters, I'm trying to moderate the list using the "root" account. Discarding works, but when I try to either accept or reject a message, there is a timeout. I can't find anything in mailman.log, mailmansuite.log or even /var/log/httpd/access_log. I managed to reject and approve messages manually using mailmanclient and the REST API, so the issue appears to be somewhere between Postorius 1.3.3 and mailmancore. Any ideas? -- .:.Sebastian Hagedorn - Weyertal 121 (Gebäude 133), Zimmer 2.02.:. .:.Regionales Rechenzentrum (RRZK).:. .:.Universität zu Köln / Cologne University - ✆ +49-221-470-89578.:.

4 6

Throttle outgoing emails to a certain rate?
by arvid.teichtmann＠gmx.de 21 Aug '20

21 Aug '20

Is there a possibility to throttle the sending of outgoing emails to a certain rate, e.g. 100 emails per hour, or to split them up into corresponding chunks? I run Mailman 2.1.33 on a hosted server and the provider only allows me to send a maximum of 100 emails per hour. The excess emails are also simply discarded and the sender and list administrator get a bunch of error emails. This is very annoying, especially because I didn't know about it and the problem only now occurs occasionally during operation... ;-( Thanks for all hints.

3 2

Spam sign ups
by Seth Seeger 21 Aug '20

21 Aug '20

Hello all, I've suddenly started getting a slow but steady stream of fake sign ups. They fail because I'm getting a bounce back from the mail host saying that the email address they signed up with doesn't exist. I know this was asked a while back on this list, but I'm hoping there might be an update? Any way to add an am-I-human test to the sign up? Thanks, Seth

2 1

mailman not starting, status is active (exited)
by Ricardo Kleemann 19 Aug '20

19 Aug '20

Hi, After quite a long time with no issues, I’ve started having a problem where mailman won’t start and I don’t see any clear error message I’m running on Ubuntu, not sure which mailman version (forgot how to determine). Here is the status info sudo systemctl status mailman ● mailman.service - LSB: Mailman Master Queue Runner Loaded: loaded (/etc/init.d/mailman; generated) Active: active (exited) since Wed 2020-08-19 07:38:59 PDT; 2h 46min ago Docs: man:systemd-sysv-generator(8) Process: 2351 ExecStop=/etc/init.d/mailman stop (code=exited, status=0/SUCCESS) Process: 2386 ExecStart=/etc/init.d/mailman start (code=exited, status=0/SUCCESS) Aug 19 07:38:59 relay1 systemd[1]: Starting LSB: Mailman Master Queue Runner... Aug 19 07:38:59 relay1 systemd[1]: Started LSB: Mailman Master Queue Runner Any ideas? thanks Ricardo

3 2

mailman stopped working, it shows active (exited)
by Ricardo Kleemann 19 Aug '20

19 Aug '20

Hi, it’s been quite a while since I’ve been back to the list, mailman has been working very well for me But recently it has stopped working. I’m not exactly sure what I did to cause this. I’m not seeing any clear error message. Running on Ubuntu linux, I don’t quite remember how to determine my mailman version. Here’s the status info sudo systemctl status mailman.service ● mailman.service - LSB: Mailman Master Queue Runner Loaded: loaded (/etc/init.d/mailman; generated) Active: active (exited) since Wed 2020-08-19 07:38:59 PDT; 13min ago Docs: man:systemd-sysv-generator(8) Process: 2351 ExecStop=/etc/init.d/mailman stop (code=exited, status=0/SUCCESS) Process: 2386 ExecStart=/etc/init.d/mailman start (code=exited, status=0/SUCCESS) Aug 19 07:38:59 relay1 systemd[1]: Starting LSB: Mailman Master Queue Runner... Aug 19 07:38:59 relay1 systemd[1]: Started LSB: Mailman Master Queue Runner.

1 0

Invalid confirm text
by w.schoener＠alp.dillingen.de 19 Aug '20

19 Aug '20

Hi there, I am new to mailman 3, python and django. I try to configure a mailman 3 list. To establish german text, I used the web-admin interface of mm3 in the "templates"-section. I inserted a text for "The message sent to subscribers when a subscription confirmation is required" Now, when I try to subscribe to the list, I get my first message in german language, with the confirm request: return the message unchange. When I return the message, I get an answer: Invalid confirm text. My request is pending. And there is no way to solve this pending request, in the webinterface, no subscription request is shown, no member is shown and no no-member is shown. Have you any hint, what is going wrong. What do I have to respect to create a message, where the confirmation is working. Thank you Wolfgang

2 5

Single-Sign-out for List member
by w.schoener＠alp.dillingen.de 17 Aug '20

17 Aug '20

Hello, I have to configure mailman 3 for a german company. The privacy policy in our country demands for mailing-lists, that its member can sign out in one step, it is called sigle-sign-out. So I would like to ad a link in the footer of every message, with which every receiver/member can sign out of the newsletter with one click. It does not seam to be possible, to put this into effect with mailman 3. Does anybody have any hints, how to create a link, and when this link is called, the user is signed out of the newsletter. Thank you, Wolfgang

5 7

postfix docker image
by Danil Smirnov 16 Aug '20

16 Aug '20

Hi, For those who are using Abhilash's Docker images for Mailman 3 deployment and willing to up Postfix as a container - I've created a lightweight Docker image for this purpose: https://github.com/danil-smirnov/docker-postfix It has been tested for awhile already. I'd appreciate more testing and bug reports/feature requests. Best regards, Danil Smirnov https://mailman3.com/

1 0