- Mailman-users - lists.mailman3.org

Default Setting for 'Results per Page' and other Web Pull-downs
by Dave Hall May 5, 2023

May 5, 2023

Hello. For the past several months I've been in the process of migrating from Mailman2 to Mailman3 (along with many other tasks). I've just started to use the web interface heavily as I am finally doing the full migration of all my 2.1 lists. Before I ask my question, I am currently running Debian 10 which supplies mailman-3.2.1 and mailman-web 0+20180916, which are definitely old at this point. Although I will soon move to Debian 11, I am still constrained to stick to Debian packages. So if this has been fixed or enhanced in a future version I'm sorry for asking an old question. My question: when I go to any page that has a list (of lists, of members, or archives), there are pulldowns like 'Results per page' that seem to reset to the minimum number when I refresh the page. There are others like 'Hide inactive' on the Archives page. What I'm looking for is a per-user way to customize these values so I don't have to keep on setting them to the value I prefer. If that is available in a later release then I have something to look forward to. If not, it sure would be nice to have. Thanks. -Dave -- Dave Hall Binghamton University kdhall(a)binghamton.edu

2 1

Amazon SES, Message-ID, and mailman
by Sam Darwin May 5, 2023

May 5, 2023

Hi, We are running a mailman 2 mailing list, soon to upgrade to mailman 3. We recently switch the mail gateway from mailgun to Amazon SES. There's a new problem that the mailman 2 archives are not able to group threads together the way they were before. Moreover, end users have their own mail clients that display the list messages, and they are complaining about issues in their local mail clients. It seems to be related to the mail header fields Message-ID: , References: , and In-Reply-To: . Amazon SES rewrites the Message-ID. Therefore, it won't match the original Message-ID, and so the second reply email won't matched with the first email in a web archive display. Additionally, email replies are often sent both to the list and to individual participants, and so it's important that both of these copies have the identical message id. Has anyone else used Amazon SES as a mail gateway, and did you have success with it? Does this interpretation of the problem seem reasonable? Would it make sense to briefly discuss "Amazon SES" in an FAQ section of the mailman documentation? Thanks, Sam

2 2

Change delivery_status of a member by using the rest api
by Michael Schaarschmidt May 4, 2023

May 4, 2023

Hello, I would like to set or change the delivery_status of a list member by using the rest api. The curl request looks like curl \ -X PATCH \ -H "Content-Type: application/json“ \ -H "Accept: application/json“ \ -u restadmin:secret_password \ -d "@./foo_patch.json“ \ "http://127.0.0.1:8001/3.1/members/ebcdd09bb8d84758a135c3449023701e“ With the json-file: { „delivery_status“: „by_user“ } I get an error message: {"title": "400 Bad Request", "description": "Unexpected parameters: delivery_status“} Is there a way to change the attribute `delivery_status` of an existing member by using the rest api? Cheers, Michael Schaarschmidt ___________________________________________ Mailman's content filtering has removed the following MIME parts from this message. Replaced multipart/alternative part with first alternative.

2 1

Postorius install - missing python modules
by Marco F May 3, 2023

May 3, 2023

Hello, On AlmaLinux 8.7, after Configuring Mailman and Setting up my database (postgres), and hooking up my mailserver (Exim), the instructions proceed to Set up Postorius: https://docs.mailman3.org/projects/postorius/en/latest/setup.html I've tried `pip install postorius`, as well as the latest version, cloning and `pip install -e .`. I've tried with multiple python versions, all with the results: ModuleNotFoundError. Here's highlights of one example: ``` dnf update -y dnf upgrade -y dnf install -y python39 alternatives --config python3 » python3 -V Python 3.9.13 pip3 install postorius git clone https://gitlab.com/mailman/postorius.git cd postorius pip3 install -e . cd example_project ~/postorius/example_project (master)» » python3 manage.py migrate ... ModuleNotFoundError: No module named 'debug_toolbar' » pip3 install debug_toolbar ERROR: Could not find a version that satisfies the requirement debug_toolbar (from versions: none) ERROR: No matching distribution found for debug_toolbar » pip3 install django-debug-toolbar ... » python3 manage.py migrate ... ModuleNotFoundError: No module named 'requests_panel' » pip3 install requests_panel ... » python3 manage.py migrate ... ModuleNotFoundError: No module named 'requests_panel' » pip3 install django-requests-panel ... » python3 manage.py migrate ... ModuleNotFoundError: No module named 'requests_panel.panel' # I tried a bunch of different modules, none resolved the error, finally tried this & it did: » cd $( dirname $( locate requests_panel/panels.py ) ) && cp -pv panels.py panel.py » python3 manage.py migrate ... ModuleNotFoundError: No module named 'requests_wrapper' » pip3 install requests_wrapper ... » python3 manage.py migrate ... ImportError: cannot import name '_total_seconds' from 'requests_wrapper' (/usr/local/lib/python3.9/site-packages/requests_wrapper/__init__.py) ```

2 1

looking for more detailed traceback for shunted message
by bob B May 3, 2023

May 3, 2023

Had a message get shunted in /opt/mailman/core/var/queue/shunt/. *** but that is the location in the docker environment, which we are running. The mailman log shows: Apr 26 13:09:56 2023 (31) ACCEPT: 2e0e82a5-0924-1777-bed8-34862417fe7e@[Redacted] Apr 26 13:09:56 2023 (35) Uncaught runner exception: 'ascii' codec can't encode characters in position 1198-1200: ordinal not in range(128) Apr 26 13:09:56 2023 (35) Traceback (most recent call last): Apr 26 13:09:56 2023 (35) SHUNTING: 1682514596.7976818+6067e5ddeb70e4aad97977071b5ed00c41999057 Apr 26 13:10:14 2023 (31) ACCEPT: 367fa8b7-97ac-58b3-fb99-458dbb951f5d@[Redacted] Apr 26 13:10:14 2023 (31) ACCEPT: 367fa8b7-97ac-58b3-fb99-458dbb951f5d@[Redacted] Apr 26 13:10:16 2023 (35) Uncaught runner exception: 'ascii' codec can't encode characters in position 1198-1200: ordinal not in range(128) Apr 26 13:10:16 2023 (35) Traceback (most recent call last): Apr 26 13:10:16 2023 (35) SHUNTING: 1682514616.5346222+7292ba8b651bc1bd76a9098733a39090e092add2 Is there anyway to get more info, Is there a more detailed traceback somewhere?

5 10

Python is updated
by Lars Bjørndal April 29, 2023

April 29, 2023

Hi, list! As the machine I'm running Mailman on now is upgraded from Fedora 36 to 37, the Python version is upgraded from 3.10 to 3.11. How do I update Mailman in the virutal environment? Thanks, Lars

5 22

How to see the admin password reset in docker with mailman3
by bob B April 27, 2023

April 27, 2023

I am setting up a new environment of Mailman3 in docker. I understand I have to reset the password to set the password for admin. I go to forget the password, in the GUI and I put in the address I have listed in the docker-compose.yaml and I never get the email. I look at the mail log on the host and I do not see the smtp connections. I assume Django is not using the docker host but sending the mail directly?? Basically, where can I see the password email rest mail logs to make sure an email was sent out and where it is going?

3 3

If I manually add email addresses to a list and then delete them, how do i permanent delete them from Users?
by Mark London April 25, 2023

April 25, 2023

I added some email addresses manually to a mailing list and then removed them. But now I can't find how to totally remove them from mailman3. They show up in the Users list. When I go to the Django interface, I don't see them listed in any selection. I thought they would show up under Emails in Hyperkitty, but they are not there. Oddly, somehow I've managed to create multiple duplicates of the same address, under Emails. Figure that one out! Thanks. - Mark 21 mrl(a)psfc.mit.edu April 25, 2023, 4:54 a.m. [Mark] afasdfa mark.lists1.psfc.mit.edu 20 mailman(a)psfc.mit.edu April 25, 2023, 4:44 a.m. [Mark] Re: tet mark.lists1.psfc.mit.edu 19 london(a)mit.edu April 25, 2023, 4:31 a.m. [Mark] tet mark.lists1.psfc.mit.edu 18 mrl(a)psfc.mit.edu April 25, 2023, 3:28 a.m. [Mark] test mark.lists1.psfc.mit.edu 17 mailman(a)psfc.mit.edu April 25, 2023, 3:27 a.m. [Mark] tet mark.lists1.psfc.mit.edu 16 mailman(a)psfc.mit.edu April 25, 2023, 3:22 a.m. [Mark] Re: foobar mark.lists1.psfc.mit.edu 15 mrl(a)psfc.mit.edu April 25, 2023, 3:21 a.m. [Mark] test mark.lists1.psfc.mit.edu 14 mrl(a)psfc.mit.edu April 25, 2023, 2:05 a.m. [Mark] ;jklj mark.lists1.psfc.mit.edu 13 mrl(a)psfc.mit.edu April 25, 2023, 1:53 a.m. [Mark] foobar mark.lists1.psfc.mit.edu 12 mrl(a)psfc.mit.edu April 25, 2023, 1:52 a.m. [Mark] test mark.lists1.psfc.mit.edu 11 mailman(a)psfc.mit.edu April 25, 2023, 1:51 a.m. [Mark] Re: test mark.lists1.psfc.mit.edu 10 mrl(a)psfc.mit.edu April 25, 2023, 1:42 a.m. [Mark] test mark.lists1.psfc.mit.edu 9 mrl(a)psfc.mit.edu April 25, 2023, 1:38 a.m. [Mark] test mark.lists1.psfc.mit.edu 8 mrl(a)psfc.mit.edu April 25, 2023, 1:40 a.m. [Mark] test mark.lists1.psfc.mit.edu 7 mailman(a)psfc.mit.edu April 25, 2023, 1:33 a.m. [Mark] foobar mark.lists1.psfc.mit.edu 6 mailman(a)psfc.mit.edu April 25, 2023, 1:32 a.m. [Mark] test mark.lists1.psfc.mit.edu 5 root(a)psfc.mit.edu April 25, 2023, 1:21 a.m. [Mark] foobar mark.lists1.psfc.mit.edu 4 root(a)psfc.mit.edu April 25, 2023, 1:20 a.m. [Mark] test mark.lists1.psfc.mit.edu 3 root(a)psfc.mit.edu April 25, 2023, 1:11 a.m. [Mark] test mark.lists1.psfc.mit.edu 2 root(a)psfc.mit.edu April 25, 2023, 1:14 a.m. [Mark] test mark.lists1.psfc.mit.edu 1 mailman(a)psfc.mit.edu April 25, 2023, 1:22 a.m. [Mark] test mark.lists1.psfc.mit.edu

5 11

Configuring sendmail without virtualtable? Is this possible?
by Mark London April 25, 2023

April 25, 2023

I'm presently running mailman 2 on an email server, which all use @psfc.mit.edu addresses. And which uses /etc/aliases. The directions for configuring sendmail for mailman 3, specify using virtusertable. I want my new email server to also host mailman 3 on ubuntu. Is it still possible to use sendmail, given the following directions for sendmail configuration? Seems talk using might break things. Or am I wrong? https://gist.github.com/Maeglin73/72eb5b1e4ee66a383c2aa454726be9a5 Thanks for any help. - Mark

3 2

Problems getting MM3 to work
by Alain D D Williams April 25, 2023

April 25, 2023

I have been using mailman2 for some 15 years ... decided that it is time to upgrade to MM3. I have to admit that I am finding it very hard to do so. My target is a Rocky Linux machine (AKA CentOS/RedHat). I am doing a test install in a virtual Debian 10 machine - the idea is learn how it hangs together before reimplement on Rocky (where I tie things down with SELinux). For me the biggest problem is the poor documentation - for someone who is new at MM3 and is not a Python programmer. After a few false starts I am doing a virtualenv installation as described: https://docs.mailman3.org/en/latest/install/virtualenv.html (Changes: I am using mariadb not postgresql, apache not nginx) I am trying to set up the WSGI server. It thinks that my domain is example.com ... when I 'grep -r example.com /opt/mailman' I see 11338 lines - far too many to look through. Could someone please tell me what/where I configure to enter my test domain. Thanks in advance. -- Alain Williams Linux/GNU Consultant - Mail systems, Web sites, Networking, Programmer, IT Lecturer. +44 (0) 787 668 0256 https://www.phcomp.co.uk/ Parliament Hill Computers Ltd. Registration Information: https://www.phcomp.co.uk/Contact.html #include <std_disclaimer.h>

3 3