- Mailman-users - lists.mailman3.org

Re: hosted signup is producing unexpected results
by tokyoprogressive＠mailbox.org Sept. 17, 2019

Sept. 17, 2019

I mistakenly posted twice. Please see: https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… Sent from my iPhone

1 0

Execution of msgfmt failed when performing post upgrade steps
by Torge Riedel Sept. 17, 2019

Sept. 17, 2019

Hi, I'm currently running a test setup of MM3 using Mark Sapiros approach with two venv. I also adopted his post-upgrade-script for the web part (django). Just some minutes ago I updated the packages of my test setup with pip3 where hyperkitty is now 1.3.0 When runnin the post-upgrade-script I get the following error message: Execution of msgfmt failed: /opt/mailman/web/venv/lib/python3.6/site-packages/hyperkitty/locale/nb_NO/LC_MESSAGES/django.po:630: duplicate message definition... /opt/mailman/web/venv/lib/python3.6/site-packages/hyperkitty/locale/nb_NO/LC_MESSAGES/django.po:273: ...this is the location of the first definition msgfmt: found 1 fatal error Not sure whether this is an error of MM3 or one of its dependency packages. Best regards Torge

2 1

hosted signup is producing unexpected results
by tokyoprogressive＠mac.com Sept. 17, 2019

Sept. 17, 2019

In my test of the two forms of signup, I am getting these unexpected results. Is it my settings or is something weird within the program itself? 1) https://list.tokyoprogressive.org/postorius/lists/discuss.list.tokyoprogres… 2) Choose "You can also subscribe without creating an account. If you wish to do so, please use the form below" 3) Then I have to approve it. They get "Welcome to the "Discuss" mailing list! To post to this list, send your email to: discuss(a)list.tokyoprogressive.org 4) But I have to approve it.I assume this is because they do not yet have a real account. And they should be listed as a NON MEMBER? 5) But even when they sign up here: https://list.tokyoprogressive.org/accounts/signup/?next=%2Fpostorius%2Flist… they get an email from my provider (NOT MY LIST????) as follows: "Hello from mailman3.emwd.com! You're receiving this e-mail because user iCloud has given yours as an e-mail address to connect their account. To confirm this is correct, go to https://list.tokyoprogressive.org/accounts/confirm-email/MTE3:1iA44k:E7w7xh… Thank you from mailman3.emwd.com! mailman3.emwd.com" 6) And this is where it gets weird. If they send from their email program and get the welcome (Welcome to the "Discuss" mailing list! To post to this list, send your email to: discuss(a)list.tokyoprogressive.org You can unsubscribe or make adjustments to your options via email by sending a message to....... I then get a notice: "Your mail to 'discuss(a)list.tokyoprogressive.org' with the subject test notice Is being held until the list moderator can review it for approval. The message is being held because: The message is not from a list member" 7) While if they send FROM THE interface it goes through. 8) What I am confused about. Signing up for an account should make them a member, right? Subscribing should make them a non member, no? But here it seems that both make them a non member. And worse, someone with an account sending from the Interface has their message get through while the same person sending from an email program has me get a notice that a non member is trying to post. Before I can move my actual members over from another mailing list provider, I want to make sure what works and what doesn't. Thanks. paul!!!

1 0

HyperKitty and duplicate emails across maillists
by Derek Lambert Sept. 17, 2019

Sept. 17, 2019

How does HyperKitty handle duplicate messages/message-ids across maillists? We have quite a few lists that are members of other lists. I'm in the process of importing our old Mailman 2.1 archives and seeing a lot of duplicate message errors, and wondering if this is why. Would new messages coming into Mailman be handled the same way? Thanks, Derek

5 8

Template's encoding setup
by Ugnius Sept. 15, 2019

Sept. 15, 2019

I use Lithuanian language (it has special characters like ąčįū...) for regular message template feature. I noticed that some posts come correct, but some have question marks (?) in places of these characters. Looks like there is sittings trick. But footers adds mailman, so it should be always correct, or it depends on senders environment setup? Kind regards Ugnius

3 6

Weird recipient
by Andrew Bernard Sept. 12, 2019

Sept. 12, 2019

Both before and after upgrading tonight, my lists send out bizarre recipients that I cannot understand. It usually happens at the end of the distribution to other valid recipients. Sep 5 10:05:54 www postfix/smtp[3344]: A5DF9FA14E: to=<0101016d00e302ec-4db56da5-fd69-4b5e-9327-292c55e13ea8-000000(a)us-west-2.amazonses.com>, relay=email-smtp.us-west-2.amazonaws.com[52.36.120.66]:587, delay=2.4, delays=0/0/2.2/0.22, dsn=5.0.0, status=bounced (host email-smtp.us-west-2.amazonaws.com[52.36.120.66] said: 501 Invalid MAIL FROM address provided (in reply to MAIL FROM command)) Help! This behaviour is able to be replicated - it happens on every post. Andrew

2 1

Alter Messages: Reply to confusion
by paul＠arenson.org Sept. 12, 2019

Sept. 12, 2019

This is one thing I am confused about. The explanations in the settings about No Munging, etc. are not completely clear. MY GOAL What I want to make sure, since this is a discussion list, is that most messages go to the mailing list, not to individuals. I plan to put something in one of the templates to remind people that a reply goes to the discussion list. If they do not want to send it to everyone, they should send to the original poster. 1) I understand there are plusses and minuses but I am not sure I understand the explanation given. If it IS preferable to use NO MUNGING, how do I make sure that this is easy to accomplish? 2) I can put something in the footer of every message to remind people, but first I need confirmation of what I should choose in this section. Thanks in advance.

4 3

Mailman 3 installation, no mails in hyperkitty, unable to add footer.
by ugniusviln＠gmail.com Sept. 12, 2019

Sept. 12, 2019

I have read documentation, but still have stupid questions, could You please help, because I can't make it working. I do not understand something important. I have no experience with python at all. I have mailman 3, python 3.5 in my debian OS system, and additional packages like uwsgi and ect. using https://buildmedia.readthedocs.org/media/pdf/gnu-mailman/latest/gnu-mailman… about till chapter 6. I understand mailman suite has hyperkitty already. But I am not sure about: 1. Does mailman-suite have hyper-kitty inside? Because if I run $python manage.py runserver - it runs. In installed it under dedicated OS user home and fonfigured to run. I can create lists, event add lists to hyperkitty page using: $django-admin runjob new_lists_from_mailman list server sends messages to list members as well. But nothing happens more. No emails come to hyperkitty, arciver log 0 size. $ python manage.py runjobs -l shows the lists of the jobs, so seems nothing to add. Except uwsgi.ini, I have only 2 configuration files in mailman-suite project directory: settings.py and mailman.cfg So I do not understand what did I configured badly. 2. If I (using Postorius web interface) add footer template to my list under regular message, something strange happens. Mailman stops to send messages for list members. No any entries in the logs. Just Mailman log writes: "unable to connect localhost port 25" and no more explanation. If I delete list's footer template (web interface), mailman starts working again. What is bad here? How to add custom footer? In mailman 2 if was working so good and was easy to setup.

4 7

Suspend a list temporarily
by Andrew Bernard Sept. 12, 2019

Sept. 12, 2019

Is there any way to do this, while keeping other lists running?

3 3

Re: HYPERKITTY_ATTACHMENT_FOLDER
by Ugnius S Sept. 11, 2019

Sept. 11, 2019

Could You please confirm that this parameter should be placed in mailman-hyperkitty.cfg file? I have checked mailman/postorius/hyperkitty owner user can write files there and web user group has privileges to write and to read, but *no any files appear there*. Mailman works, it is possible to download attachments from hyperkitty. Mailman restarted, uwsgi restarted, runjobs restarted. No files in /full/path/to/folder/ File looks like: [general] base_url: https://flistserv.example.com/hyperkitty/ api_key: BlaBlabla HYPERKITTY_ATTACHMENT_FOLDER = /full/path/to/folder/ BR Ugnius 2019-09-11, tr, 21:21 Ugnius S <ugniusviln(a)gmail.com> rašė: > Thank You so much. > > 1) https://hyperkitty.readthedocs.io/en/latest/install.html > Close to the end before the "UPDATE" topic, chapter "Customization". > > 2) > https://buildmedia.readthedocs.org/media/pdf/hyperkitty/stable/hyperkitty.p… > Page 10, chapter 2.8 "Customization" > > BR > Ugnius > > 2019-09-11, tr, 20:16 Abhilash Raj <maxking(a)asynchronous.in> rašė: > >> >> >> On Wed, Sep 11, 2019, at 9:52 AM, Ugnius S wrote: >> > Hi. >> > >> > Can anybody send example how to set it? It is mentioned in >> documentation, >> > but very vaguely. >> >> If you can point out where did you find it in docs, I can update it. >> Information is kind of duplicated in a few places. >> >> > HYPERKITTY_ATTACHMENT_FOLDER = /full/unix/path >> >> This is the right value. >> >> It is a path on the filesystem, where the user running Hyperkitty is >> allowed to write. >> >> > >> > HYPERKITTY_ATTACHMENT_FOLDER = http://localhost:8000/something >> > >> > HYPERKITTY_ATTACHMENT_FOLDER = ./var/data/something/ >> > >> > Has anybody experience of using this, maybe have recommendations of >> using >> > it? Better under project user or better under web content owner where >> the >> > static content is. I would like to store attachments separately to avoid >> > growing database. >> > Hyperkitty documentation: >> > By default, HyperKitty stores the email attachments in the database. >> If >> > you would rather have them stored on the filesystem, you can set the >> > HYPERKITTY_ATTACHMENT_FOLDER configuration value to a directory. >> > Make sure that the user running the Django process (for example, apache >> or >> > www-data) has the permissions to write in this directory. >> > >> > ------------- >> > _______________________________________________ >> > Mailman-users mailing list -- mailman-users(a)mailman3.org >> > To unsubscribe send an email to mailman-users-leave(a)mailman3.org >> > https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org/ >> > >> >> -- >> thanks, >> Abhilash Raj (maxking) >> _______________________________________________ >> Mailman-users mailing list -- mailman-users(a)mailman3.org >> To unsubscribe send an email to mailman-users-leave(a)mailman3.org >> https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org/ >> >

2 2