- Mailman-users - lists.mailman3.org

Feedback mailman 3.3.10b1
by Andreas Schneider Sept. 24, 2024

Sept. 24, 2024

Hi, I've packaged 3.3.10b1 for openSUSE [1] and installed it on my server. It works fine for me, I don't see any issues. Best regards Andreas [1] https://build.opensuse.org/package/show/home:gladiac:mailman/python-mailman -- Andreas Schneider asn(a)cryptomilk.org GPG-ID: 8DFF53E18F2ABC8D8F3C92237EE0FC4DCC014E3D

1 0

Read mailing list config via CLI
by Andy Matthews Sept. 24, 2024

Sept. 24, 2024

I'm working on a feature to allow configuration of mailing lists using the REST API. The docs show how to do this: https://docs.mailman3.org/projects/mailman/en/latest/src/mailman/rest/docs/… But I'd like to be able to verify settings using the mailman command or Python shell; and surprisingly I can't find where in the docs it shows how you can read settings on a per-list basis. I'm fine with either option, but I've spent about an hour digging through source code and docs and I'm not finding it. Would someonebe so kind as to point out how I can inspect configuration on a list by list basis? TIA.

2 3

New Mailman web package releases
by Abhilash Raj Sept. 21, 2024

Sept. 21, 2024

Hello Everyone, I have just released Postorius 1.3.13 and Hyperkitty 1.3.12. These can be downloaded from PyPI: https://pypi.org/project/HyperKitty/1.3.12/ https://pypi.org/project/postorius/1.3.13 Note that due to some mistakes on my part, last 2 releases for Postorius & Hyperkitty were yanked since their builds uploaded to PyPI weren't correct due to some mis-configurations migrating from setuptools to pyproject.toml (with pdm) based package configuration. So, when updating from last installed versions, please look at the changelogs from older versions too for both these packages. Their changelogs are available in the usual places: https://docs.mailman3.org/projects/postorius/en/latest/news.html https://docs.mailman3.org/projects/hyperkitty/en/latest/news.html Since PyPI doesn't accept signatures anymore, I have uploaded packages and their signatures to Gitlab releases in their respective repositories too. A note for people using my signature for verification: I had to extend my gpg key's validity, so you'll need to refresh my public keys to validate the signature this time. -- thanks, Abhilash Raj (maxking)

1 0

MM3 Bounces status
by Ruth Ivimey-Cook Sept. 21, 2024

Sept. 21, 2024

Hi, I have some lists which are used primarily as a distribution method (rather than chat) and the person who uses these lists doesn't have access to the detailed MM logs and is not interested in that. It would be very helpful for message bounces (& any other anomalous events, if any) were to be available to that person for each message that is sent out, in a manner similar to mailgun et al. I know something of the bounce processing MM3 does, but it seems to be totally hidden from e.g. the postorius end of things (unless I'm missing something?). Is there a way for bounce events to be emailed to the list owner, or for something to be available in postorius to show this info? If not in the standard package, do other people have ad-hoc solutions to this issue? My ideal option would be for a configurable per-message email or postorius link that reports the number of emails to send (=number in mlist), the number on 'no-mail', the number sent successfully (=no bounce?), the emails of those who bounced (with bounce score), and emails of blocked sends (eg by multiple bounces). So for example: Bounce report for listname: Email Subject: Announcement Sent: today at time From Email: user(a)example.com received (today at time) To List: listname(a)example.com with 100 subscribers; 89 successful; 4 bounces; 3 blocks; 4 nomail; Bounces: - foo(a)bar.example.com (no mailbox) - bar23(a)foo.example.com (timeout) - alice(a)baz.example.org (mailbox full) - bob(a)example.net (bounce-reason) Blocked: - foo(a)bob.example.com (score 3) - bar23(a)alice.example.com (admin ban) - alice(a)alice.example.org (score 2) I suspect that my ideal option would require changes to the internal processing, because MM would need to keep more information about bounces than I think it currently does. It might also need to retain more information about LMTP delivery statuses? Thanks in hope? Ruth -- Software Manager & Engineer Tel: 01223 414180 Blog:http://www.ivimey.org/blog LinkedIn:http://uk.linkedin.com/in/ruthivimeycook/

1 0

CSV import for mass subscription
by Markus Grandpré Sept. 20, 2024

Sept. 20, 2024

Dear list, we noticed that there is a function to convert the member list into a CSV format and save it.Therefore, we would like to know if the implementation of a CVS import for mass subscription is already planned? If not, how can we submit a corresponding feature request? Best regards, Markus Grandpré -- Markus Ludwig Grandpré Universität Konstanz Kommunikations-, Informations-, Medienzentrum (KIM) Abteilung IT-Dienste Forschung und Lehre, B803, Tel: ++49 7531 88 4342

3 5

Questions regarding message acceptance
by Pawel Grzywaczewski Sept. 19, 2024

Sept. 19, 2024

Hello, I have few questions regarding usage of Mailman3: 1) We have list1 and list2 with members. Can we specify that all members of list1 can post messages to list2? We could potentially write a script that would synchronize members of another list to “Accept these non-members” of another list, but with thousands of lists it will be difficult to maintain lists in synchro. So perhaps there is a concept of adding another list to “Accept these non-members” and mailman real-time evaluate membership of another list upon message arrival? 2) In explanation of “Accept these non-members” it’s written: “While non-regexp addresses can be entered here, it is preferred to add the address as a nonmember and set the nonmember's Moderation to Default Processing”. I noticed that if someone posts to a list then he is added automatically to non-members. Which means that next time he will be able to post. My understanding is that it’s better to use the feature “Accept these non-members”. Am I correct? Thank you, Paweł

5 7

Configure new list via REST API - trying to add moderators
by Andy Matthews Sept. 19, 2024

Sept. 19, 2024

I'm stepping into some existing code which creates a new list via the REST API. I know this works because I can shell into the mailman3 box and run `mailman lists` and it shows the newly created list. We're also submitting list config options via the `/lists/<list id>/config` endpoint, but there's a specific key that we have in our config map that doesn't appear in the REST API docs and I'm wondering about it. We have an array of strings called `moderator` that appears to send successfully. But looking at the docs for "Mailing list configuration" (https://docs.mailman3.org/projects/mailman/en/latest/src/mailman/rest/docs/…) I don't see anything named `moderator` The "Managing owners and moderators" docs (https://docs.mailman3.org/projects/mailman/en/latest/src/mailman/commands/d…) indicate that we can perform add owners and moderators via a Python shell, but don't indicate that it's possible to do it via REST. Is this true?

2 7

Phantom Email Address in Nonmember List
by Steve Brown Sept. 18, 2024

Sept. 18, 2024

Have an issue that is more of a puzzle than a problem. No real harm done. So don't spend much time on it if you don't recognize the issue. I am administrator for a small list, radg(a)lists.radg.us, hosted by Mailmanlists.net. They are trying hard to figure it out but so far unsuccessful. Looking at the headers of emails sent from steve(a)stevebrown.us to the list and boomeranged back to me, I see a line “X-MailFrom: bounce+66273f.99dcd9c-radg=lists.radg.us(a)stevebrown.xn--us-02t. I gather that it is designating the return path where a message would be sent if there was a delivery problem. From its position in the header, I suspect it is added as they pass through Mailgun, maybe related to DKIM. I am hoping you might know why that bounce address is recognized by Mailman 3 as a real address for my emails, but not for others, even from my wife’s computer traversing the same path from our home to the Mailman 3 server. The Mailman installation does get and process the post, but also puts the “bounce+,,,” address in its list of nonmembers. Mailmanlists.net hasn’t figured out the behavior. I can provide full header information if that would help. My understanding of how headers work is very limited. Steve Brown

2 5

mailman import21 passwords
by Sam Darwin Sept. 17, 2024

Sept. 17, 2024

Hi, On https://docs.mailman3.org/en/latest/faq-migration.html it says "Mailman 3 has a completely new account management system, none of the passwords from Mailman 2 will work with Mailman 3. Each user needs to sign up in Postorius for a new account to manage their memberships on all lists on a single instance." "Each user needs to sign up in Postorius for a new account" I am (personally) satisfied with this answer. However others at the company are asking for a detailed explanation. Consider that - - Mailman2 has access to password information. - Import scripts such as "import21" are able to import list information. - It seems that scripts such as "import21" could also generate new user accounts and passwords based on the previous ones. Why can't passwords be imported from mailman2 to mailman3? How difficult would it be to do? (is there a link to where this is already explained? ) Thanks

4 6

Required permissions for mass operations
by mailman3＠werner.by Sept. 15, 2024

Sept. 15, 2024

Hi, I've Mailman 3.3.3 running with some mailing lists and it works great. Now I'm looking for a configuration option. I'd like to have some users with permission to - moderate lists AND - perform mass operations (add members, delete members) AND - change settings for single members (execute actions in menu point "Users", "Members") It should be impossible to change other list or mailman settings for this users. To give them the moderation permission is quite easy: I add the users to the moderators of the lists. But for the user management I've to add the users to the list owners and then is there no restriction anymore to change the full list configuration. What can I do? I link to a documentation for this would help as well, but I found nothing. Thanks a lot for an answer Torsten

2 1