- Mailman-users - lists.mailman3.org

Funny responds to subscriptions emails
by Claus-Justus Heine 02 Sep '17

02 Sep '17

Playing around with mailman3 I get funny responds from the list-manager to subscription requests. I have set up a "playground" list (guess why) and trying to subscribe via email. Basically, things work. However, the end-user (me) gets confusing responses. I would not care for myself, but ... What I did: send an Email > To: playground <playground-subscribe(a)lists.claus-justus-heine.de> > From: Claus-Justus Heine <Claus-Justus.Heine(a)IANS.Uni-Stuttgart.DE> > Subject: Test So far so good. I get the expected confirmation email with subject confirm 3093b4 etc etc etc But I also get a second rather confusing email: > The results of your email command are provided below. > > - Original message details: > From: Claus-Justus Heine <Claus-Justus.Heine(a)IANS.Uni-Stuttgart.DE> > Subject: Test > Date: Sat, 2 Sep 2017 22:24:08 +0200 > Message-ID: <44151460-05a8-4c35-e0d4-646efe3cf234(a)IANS.Uni-Stuttgart.DE> > > - Results: > Confirmation email sent to Claus-Justus Heine <Claus-Justus.Heine(a)IANS.Uni-Stuttgart.DE> > No such command: Test > No such command: --=20 > No such command: Claus-Justus > No such command: f=C3=BCr > No such command: Numerische > No such command: Stuttgart > No such command: +49 > No such command: +49 > > - Done. BTW, I also got the same confusing email when subscribing to mailman-users(a)mailman3.org (is attached). Can this be switched off? I don't care for myself, but if you think that this software is ready for production, then end-users should not receive such kind of """"things"""" Regards Claus -- Claus-Justus Heine himself(a)claus-justus-heine.de http://www.claus-justus-heine.de/ Schatzmeister der Camerata Academica Freiburg e.V. --- www.cafev.de

2 1

Mailman3 Docker question and importing lists from MM2
by Andrew Hodgson 02 Sep '17

02 Sep '17

Hi, Started experimenting with the Docker images at https://github.com/maxking/docker-mailman/. I had a question regarding the parameter: SERVE_FROM_DOMAIN. I want to use multiple domains, what is the best way to specify multiple domains in this environment variable? I tried it without the environment set, and also with some variables like: SERVE_FROM_DOMAIN=['lists.domain.com', 'lists.domain2.com'] and SERVE_FROM_DOMAIN="lists.domain1.com", "lists.domain2.com" However I still only get the example.com site. Furthermore, is there a recommended way to get data from MM2 (list configs and archives) into MM3? Thanks. Andrew.

4 11

Help request, almost got it going, but ....
by Claus-Justus Heine 02 Sep '17

02 Sep '17

First: thanks for all those development work, I am aware of the fact that this is free software and most of the development probably happened in someones spare-time. I have some problems: - I tried to install mailman v3. "Read the (non) docs" was of little help, but I got to some partly success following the commands in the scripts in the docker image at https://github.com/maxking/docker-mailman Things seemed to work out, I generated a test-list "Playground" and now I am just in the progress to click through all the configuration options in the the postorius Web-GUI. So far so good Now I read the "Message Acceptance" tab AND here is the problem: Seemingly, at some point in the deep dungeons of the source code the "Acceptable aliases" Text-Box is not interpreted correctly. Specifically, at the start it contains the string [] When then changing something int the "Message Acceptance" tab, an error shows up in the web-page (but no-where in the logs) "An error occured: []" and the bogus [] is restored. I tried to dig into the source code, and well, the data source of the text-field is an array or list of acceptable email-adresses. But seemingly finally at some point in the source code an empty list is not converted to the empty string, but to the string []. I can get rid of the error message "An error occured: []" by inserting an email-at '@' at just some place in the input box, this yields (clicking "Save changes" again and againg ...): [u"[u'@']"] [u'[u\'[u"[u\\\'@\\\']"]\']'] [u'[u\'[u\\\'[u\\\\\\\'[u"[u\\\\\\\\\\\\\\\'@\\\\\\\\\\\\\\\']"]\\\\\\\']\\\']\']'] and so on. Unfortunately, I did not find the location of this bug, although I was finally able to add some "foobar" string to the already bogus web-output. Any help would be appreciated. BTW: * where is the bug-tracker for mailman3? * The documentation is really, well, close to non existent. Personally, I think the name of the URL "read-the-docs" is almost cynical. Guess I give up on it, it just does not seem to be ready for production. This was (following the docker stuff at githb) with Pythong3: mailman==3.1.0 mailman-hyperkitty==1.1.0 Python2: mailmanclient==3.1.0 postorius==1.1.0 hyperkitty==1.1.1 django-mailman3==1.1.0 Here I realize a slight version difference between the hyperkitty stuff. But this is a bug in postorius. So what. Thanks for any help, cheers Claus -- Claus-Justus Heine himself(a)claus-justus-heine.de http://www.claus-justus-heine.de/ Schatzmeister der Camerata Academica Freiburg e.V. --- www.cafev.de

3 7

Acceptable aliases defaults to []
by Henrik Rasmussen 30 Aug '17

30 Aug '17

* Docker-mail 0.1.1 * Mailman 3.1 * Postorius 1.1.1 * Hyperkitty 1.1.1 Minor issues: Settings -> Message Acceptance -> Acceptable aliases has a default of [] resulting in "An error occured: [u'[]']" when saving. This fiend should be empty by default or at least accept the default when saving. To me the description right under the Acceptable aliases field is not user friendly. It doesn't explain the purpose of the field, but is meant for the Mailman sysadmin, not the list admin who can't be expected to understand this. A much better description would be the ones used for MM2: * http://www.list.org/mailman-admin/node23.html * https://wiki.list.org/DOC/What%20does%20%22message%20has%20implicit%20desti… On a second note: Where I can change the field and message descriptions in MM3, like the /usr/lib/mailman/messages/[sprog]/LC_MESSAGES/mailman.po in MM2? -- Henrik Rasmussen <her(a)adm.ku.dk<mailto:her@adm.ku.dk>> Copenhagen, Danmark

4 4

Moving mm2 mail archives to mm3
by Tom Browder 29 Aug '17

29 Aug '17

Is there any way to move my old mm2 archives to mm3? Thanks. -Tom

4 4

Only first message displayed... sometimes
by Cameron Smith 28 Aug '17

28 Aug '17

(With the hope that someone on the list can help me diagnose this problem, I’m posting a copy of the HyperKitty issue that I opened a few days ago: https://gitlab.com/mailman/hyperkitty/issues/151.) Testing MailMan3, installed using the Docker containers 0.1.1 (with HyperKitty 1.1.1): I have two lists with several discussions in each. The participants/comments stats for all discussions show multiple participants and multiple comments. (Note that the numbers are wrong, as discussed in #149.) However, when I open a discussion, some of them only display the first message. Others display all messages, one displays only some, but not all, of the messages. In one case, the discussion showed the top two messages, but when a new message was added, it briefly showed and then it and the second message suddenly disappeared, leaving only the first message. In another case, the discussion only showed the top message, but then, for no apparent reason, the rest of the messages appeared. —— I decided to start all over, removing the Docker containers and images, as well as the existing database... all gone. With the newly created system and database, I created two new lists and three member-subscribers. I then created new threads and added several messages to the new threads. The messages came from all three of the members and were entered via email and HyperKitty. One thread was created from within HyperKitty. All of the newly created threads are displaying the same behaviour: all of the subscribers received, via email, all of the messages, but only the first message of each thread is displayed in HyperKitty. Suggestions for how to trace/diagnose the problem would be appreciated. Cameron Smith

1 0

Re: Which documentation to follow for installation
by Ruben Ibanez 28 Aug '17

28 Aug '17

Hi Abhilash, Finally we decided to install Mailman through the docker images provided by you (https://github.com/maxking/docker-mailman). The deployment was very quick, and it works flawlessly, so we will keep this solution. On the side I will try to deploy Mailman 3 through its independent modules, just for fun :) Many thanks! Cheers, R. From: "Abhilash Raj" <maxking(a)asynchronous.in> To: "Ruben Ibanez" <ribanez(a)sciops.esa.int> Cc: "mailman-users" <mailman-users(a)mailman3.org> Sent: Sunday, August 20, 2017 11:25:34 PM Subject: Re: [MM3-users] Which documentation to follow for installation On Sun, 20 Aug 2017 20:50:39 +0200 (CEST) Ruben Ibanez <ribanez(a)sciops.esa.int> wrote: > Hi Abhilash, > > Thanks for your reply. > > The point is, I think I'm missing something. I'm just a sysadmin who wants to deploy Mailman 3.x to be used for an operational environment, like any other software. Is this software actually ready for that? There are production environments running Mailman 3.1 right now if that is your questions, see https://lists.mailman3.org. Although, I guess you already saw that when subscribing to this list ;) > Of course, I'm not asking for .rpm, .deb, etc... because I understand that's > quite complex, but I tried it following all available guides, including the > Contributor's Guide, and it seems impossible to get it running at the first > time (or just to get it running) without getting crazy or fixing lots of > unexpected errors during installation. It would be helpful if you send in those errors here. It will help us debug your problem and also improve the guide for the people using it in future. One small problem about the configuration, off the top of my head, can cause some problems in the "Mailman Suite Installation" Guide[1]. I have that on my todo to fix. But, apart from that everything else should work! [1]: http://docs.mailman3.org/en/latest/prodsetup.html You would have to do some additional configuration for the web frontend to work and for the mail servers to talk to Mailman and Frontend separately, both of which is also mentioned in the documentation under "Configuring Mailman Core" and "Configure Web Frontend". Contributor's guide is not focused on deploying but just setting it up locally to play with and modify the source itself. > Have you tried to deploy Mailman 3.x strictly following the documentation? I think people have used it in past to successfully deploy Mailman 3.x, but without looking at the errors you are facing I don't have any clue as to why it doesn't work for you! > > By the way, many thanks for your hard work! > > Cheers, > RI > > > From: "Abhilash Raj" <maxking(a)asynchronous.in> > To: ribanez(a)sciops.esa.int > Cc: mailman-users(a)mailman3.org > Sent: Saturday, August 19, 2017 8:55:20 AM > Subject: Re: [MM3-users] Which documentation to follow for installation > > On Fri, 18 Aug 2017 09:40:37 -0000 > ribanez(a)sciops.esa.int wrote: > > > Hi everyone, > > > > I'm trying to deploy Mailman 3.1, but it seems there isn't a clear place to > > look for documentation. I found two different sites: > > > > https://mailman.readthedocs.io/en/latest/ > > http://docs.mailman3.org/en/latest/ > > Both of the above are actually latest documentation, > > docs.mailman3.org should be the one to look for installations guidelines for > the entire Mailman 3.x Suite, > > mailman.readthedocs.io is the documentation of Mailman 3 Core, which handles > the mail. > > http://docs.mailman3.org/en/latest/prodsetup.html > > This should be the best place to start, be sure to look at the Pre-Installation > Guide if you are new to the Python ecosystem. > > > > > Do you know which one should be followed? Both at the same time? I find it > > quite unclear... and this installation will be for an operational environment. > > > > Also, there are some (official?...) docker images, but all images are for > > mailman 3.0 but not mailman 3.1, and of course updates are not guaranteed. > > It is meant for Mailman 3.X series and is maintained by me. It currently > includes the latest releases for all the Mailman's sub-projects, also Mailman > 3.1. > > > Hope that helps! > > -- thanks, Abhilash Raj This message and any attachments are intended for the use of the addressee or addressees only. The unauthorised disclosure, use, dissemination or copying (either in whole or in part) of its content is not permitted. If you received this message in error, please notify the sender and delete it from your system. Emails can be altered and their integrity cannot be guaranteed by the sender. Please consider the environment before printing this email.

1 0

Bounce processing
by Mark Ziranski 26 Aug '17

26 Aug '17

Hello, I read that mailman3 supports 'bounce processing' but I do not know how to configure it. I want to delete members automatically from a mailing list if the delivery has failed after a certain time of attempts because his mailbox has been removed or his mail server has been shutdown etc. There is also the case that an users mailbox is full (mailbox limit exceeded). Is possible to deal with this case too? Thanks.

3 4

HyperKitty misreporting statistics
by Cameron Smith 24 Aug '17

24 Aug '17

Mailman 3, container images 0.1.1 HyperKitty 1.1.1 is showing incorrect numbers for the number of participants and the number of discussions. (All messages referred to below were submitted in August.) In one list, I have two threads. In one thread, I have three messages, each from a different email address, all submitted via email (as opposed to replying from within HyperKitty). The month page (clicking on “August”) of that list however, shows that thread as having one participant and no messages. Opening the list shows the same stats: “1 participants”, “0 comments”; all three messages are displayed. The other thread in the same list also shows one participant and no messages; it has two messages in it, one submitted via email, the other submitted via HyperKitty by a different subscriber. Opening the list shows both messages. The front page of that list shows zero participants and two discussions. A second list also has two threads with three email-submitted messages from different addresses. The monthly stats show one thread as having one participant and one message, the other as having one participant and zero messages. The front page shows one participant and one discussion. Cameron Smith

2 6

Users, members, accounts and subscribers
by Cameron Smith 24 Aug '17

24 Aug '17

Oh my! In an attempt to introduce a friend to MailMan3, I had her subscribe to a couple of lists that I set up and we exchanged a few messages via the email interface. Then I introduced her to the web interface and we were both confused when she could not log-in/sign-in and was told that her email address was not recognized. It was only later that I realized that while she was a subscriber, she hadn’t yet signed up for an account. What is the point of “accounts"? Why can someone become a subscriber, but not have an account? I find the user/member/subscriber explanation at http://mailman.readthedocs.io/en/latest/src/mailman/docs/architecture.html to be very confusing. Cameron Smith

3 3