- Mailman-users - lists.mailman3.org

Email to list owner on list creation only sent when using mailman create --notify command
by Perry Kollmorgen June 10, 2024

June 10, 2024

Hi, This is only a minor issue, however as a nicety for new list owners I am hoping there is work around or something I have missed. I have the following file: templates/domains/<fqdn_listname/en/domain:admin:notice:new-list.txt When I use the mailman create command with the --notify option the new owners receives an email with the correct template info from the above file. However when I use mailmanclient python bindings or Postorius to create an list, there is no email sent. Is there an option to include a notify option when using mailmanclient or the API direct perhaps ? Or even maybe a way to trigger a notification manually at some point once the list is completely setup including both short and long descriptions ? Thank you. Regards, Perry

2 2

Digests not working correctly
by Joel Lord June 8, 2024

June 8, 2024

So I seem to have problems with both periodic AND size-triggered digests. Size first, this is simpler. Just got one sent out, clearly triggered by a new email getting added to the queued up messages, but the setting for the list is the default 30KB and the digest came out at 23.2 KB. Is it measuring the accumulated queue as size on disk including metadata and filesystem block sizes or something, rather than the size of what the emailed digest will be? Periodic is much more complicated, even to explain. I have the cron job running nightly at 11:00 PM and it certainly seems to be working, except for one really odd thing. The list also definitely has periodic digests enabled in the web UI. This is a very bursty list, so it will go mad with traffic for a few weeks and then will go mostly idle for a month or so. The first digest of a burst is definitely size-triggered, but pretty reliably it has the last few messages from the previous burst in there. So the one I got today had three messages from today and one message from May 4th. But that May 4th message should have gone out at 11:00 PM on May 4th with the daily digest and then gotten flushed from the pending digest queue, right? -- Joel Lord

3 14

Using the API to create nonmembers with a different moderation action than the list default
by Perry Kollmorgen June 8, 2024

June 8, 2024

Hi, My next challenge is to script the setup of a bunch of nonmembers who have a moderation action of accept (or maybe defer) whilst the list itself has a nonmember action of hold. This is due to a relatively heavy use of nested lists, and have a fair number of people who might possibly send to all lists, and are important enough they wouldn't want to be manually allowed each time even if it only once. When using the mailmanclient python bindings I have worked out I can add nonmembers with something like: mailing_list.add_role('nonmember', 'nonmember(a)yourdomain.com', display_name='Non Member') However I can't see anything in the mailmanclient docs which suggest it is possible to configure a member_moderation_action or moderation_action field for that member. I assume I'll need to fall back to using the REST API directly, and most likely something along these lines: 1/ Obtain the member ID for an email address of someone who already been added as a nonmember. 2/ Patch an endpoint which looks something like: /members/{member_id} I'm not able to use the mailman binary (e.g mailman shell) on the mailman-core host itself as I would like to query an existing database of people and reach out to a mailman endpoint from the database host rather than opening that host up to further network access. I figured it might be a good stage in which to ask for a little help and pointers before I continue, perhaps there is something I have missed for a better way to approach this. Thanks. Regards, Perry

3 4

Trying to save a new style
by Perry Kollmorgen June 7, 2024

June 7, 2024

Dear Mailman-users list, I have embarked on project to stand up a Mailman3 instance for general staff email announcements and a small number of adhoc lists. I have a fair amount up and working using Docker and Postfix, with generally emails to/from lists working well, as well as the web interface. One of the reasons I've used Mailman3 is the API and mailman shell options which I'm slowly trying to wrap my head around, but having some progress. I have a question for the moment on something which has stumped me, and whilst I may have more questions as I continue on this implementation, I am hopeful someone can point out where I am going wrong on this. Welcome to the GNU Mailman shell Use commit() to commit changes. Use abort() to discard changes since the last commit. Exit with ctrl+D does an implicit commit() but exit() does not. >>> from zope.component import getUtility >>> from mailman.interfaces.styles import IStyleManager >>> manager = getUtility(IStyleManager) >>> >>> for style in manager.styles: ... print(style.name) ... legacy-announce legacy-default private-default >>> >>> >>> from zope.interface import implementer >>> from mailman.interfaces.styles import IStyle >>> @implementer(IStyle) ... class TestStyle: ... name = 'AB-Announce-Style' ... description = 'AB Announce mailing list style.' ... def apply(self, mailing_list): ... mailing_list.admin_immed_notify = true ... mailing_list.admin_notify_mchanges = true ... mailing_list.advertised = false ... mailing_list.allow_list_posts = false ... mailing_list.anonymous_list = false ... mailing_list.archive_policy = "private" ... mailing_list.archive_rendering_mode = "markdown" ... mailing_list.collapse_alternatives = false ... mailing_list.convert_html_to_plaintext = false ... mailing_list.default_member_action = "defer" ... mailing_list.default_nonmember_action = "hold" ... mailing_list.digest_send_periodic = false ... mailing_list.digests_enabled = false ... mailing_list.emergency = false ... mailing_list.include_rfc2369_headers = true ... mailing_list.max_message_size = 40000 ... mailing_list.max_num_recipients = 30 ... mailing_list.member_roster_visibility = "moderators" ... mailing_list.send_goodbye_message = true ... mailing_list.send_welcome_message = true ... mailing_list.subscription_policy = "moderate" ... mailing_list.unsubscription_policy = "moderate" ... >>> manager.register(TestStyle()) >>> >>> commit() >>> >>> for style in manager.styles: ... print(style.name) ... AB-Announce-Style legacy-announce legacy-default private-default So at this point the style has been registered, however it doesn't look to save this permanently. When I quit the shell and log back in, it only shows the original 3 styles. Nor can I see the style from the web interface. Welcome to the GNU Mailman shell Use commit() to commit changes. Use abort() to discard changes since the last commit. Exit with ctrl+D does an implicit commit() but exit() does not. >>> from zope.component import getUtility >>> from mailman.interfaces.styles import IStyleManager >>> manager = getUtility(IStyleManager) >>> >>> for style in manager.styles: ... print(style.name) ... legacy-announce legacy-default private-default >>> Is there a way to save this style permanently ? Thank you for any assistance you can provide. Regards, PerryK

3 2

Mailman3 memory footprint
by Marc SCHAEFER June 6, 2024

June 6, 2024

Hello, It seems the mailman & mailman-web memory footprint are somewhat big. It looks a lot of instances are started. I have seen this: https://gitlab.com/mailman/mailman/-/issues/1050 and added this to the end of /etc/mailman3/mailman-web.py: Q_CLUSTER = { 'workers': 2, 'timeout': 300, 'save_limit': 100, 'orm': 'default', 'poll': 5, } However, it does not seem to really reduce the memory footprint. Any other suggestions? Thank you.

2 1

Mailman3 doesn't send Mails to users (Debian12 with Plesk)
by marcus＠mbautze.de June 6, 2024

June 6, 2024

Hello, i already send this question to the plesk-forum but it seems that nobody there can help me :-( After updating from Debian 10 to 11 to 12, I now have mailman3 running on my server I then converted all lists from Mailman2 to Mailman3 following the instructions from mailman. I can access it via the web interface, manage everything etc. When I register on the web interface, I also receive the corresponding mails from Mailman (forgotten password...) Mails are also arriving, at least mails that are not allowed go into the mails to be approved. The problem, however, is that it does not send out any mails, nor do they appear in the archive. When I look in the Mailman-Log I find: May 16 01:44:55 2024 (6833) Cannot connect to SMTP server localhost on port 25 May 16 01:48:15 2024 (61252) error opening connection to nntp_host: localhost [Errno 111] Connection refused May 16 01:48:15 2024 (61252) NNTP error for list vereinsmitglieder(a)ludothek.de: [Errno 111] Connection refused The configuration of Mailman.cfg looks like this: incoming: mailman.mta.postfix.LMTP outgoing: mailman.mta.deliver.deliver smtp_host: localhost smtp_port: 25 smtp_user: smtp_pass: lmtp_host: 127.0.0.1 lmtp_port: 8024 In Mailman manuals I find hints that the transport routes have to be added to the Postfix-config. Doesn't Debian/Plesk do this automatically? Does anyone else have an idea what I need to change to get my mails out? I did the conversion from mailman2 to mailman3 with root because it didn't work with "sudo -u list "m, but the files stored in the file system all belong to list, so that shouldn't be the problem.

9 25

Sending to mangled 'From' addresses.
by hansen June 5, 2024

June 5, 2024

All, Due to the DMARC mitigation action ‘Replace From: with list address’, it happens often on my lists that someone sends a message to a mangled address, hoping that the message goes to the person listed as the sender. This happens mostly because the mail clients collect previous addresses and use them when as type-ahead candidates for new messages, which may be unrelated to the lists. For example, say the mail client captures my address as “Allan Hansen via <listname>” <listaddress> then later, when the person wants to send a message to me, the type-ahead puts this string in the ’To:’ field: “Allan Hansen via <listname>” and, to make it worse, the actual email address, <listaddress>, is often hidden. The result is that the email gets sent to the list instead of to me, together with (often) personal and (sometimes) embarrassing information. Is there a way to reject messages sent to recipients where the name part of the recipient is of the above format, i.e., "Allan Hansen via <listname>" In other words, filtering is done on the name part of the recipient, not the address part. Should I get onto the other list to request this as an enhancement? Yours, Allan

3 3

Sign and encrypt e-mail responses
by Markus Grandpré June 4, 2024

June 4, 2024

Dear List, is it possible to sign and encrypt all e-mail responses from the Mailman3 server with a digital certificate? Best regards, Markus Grandpré -- Markus Ludwig Grandpré Universität Konstanz Kommunikations-, Informations-, Medienzentrum (KIM) Abteilung IT-Dienste Forschung und Lehre, B803, Tel: ++49 7531 88 4342

3 3

Recently active discussions - Hyperkitty
by Sam Darwin June 4, 2024

June 4, 2024

Hi, Sometimes not sure if it's preferable to open a gitlab issue, or chat on the mailing list. I have run a large archive import into mailman3/hyperkitty. After that's done, waited a day, for scheduled cron jobs to complete. In "All Threads", all the email archives are present. The import worked. In "RECENTLY ACTIVE DISCUSSIONS" on the main page, it says: RECENTLY ACTIVE DISCUSSIONS No discussions this month (yet). Nothing there. That means if I direct users to visit the site, the page, it appears empty. That's too bad. :-) It should display recent emails. What would affect this feature during an archive import? Is it a problem with the import script itself, or with a scheduled cron job, or something else? Would you expect "Recently active discussions" be empty when very recent archives do exist? Thanks, Sam

3 7

import21 detailed usage instructions in 2024
by Keith Christian June 3, 2024

June 3, 2024

1 Soon, I will be executing the first test imports from Mailman2.1 to Mailman3.9. 2 Planning to copy over the entire production Mailman2.1 to a new directory structure on the Mailman 3.9 machine. 3 Expecting that all .mbox and .pkl files will be present and no special work has to be done to bring them over will a "full" mailman2.1 copy. 4 Can the import21 program find the mailman2.1 .mbox and .pkl files on its own and process them? 5 Other than the mailman2.1 instance being shut down, any other prep that needs to be done? 6 Any special command line parameters to be aware of for import21? 7 Is there a list of troubleshooting steps for commonly encountered migration issues? Thanks. ------------------ Keith

2 1