- Mailman-users - lists.mailman3.org

base64 re-encoding and line endings
by David Bremner Aug. 15, 2020

Aug. 15, 2020

I (along with some other admins) run a mailman3 (3.2.1, on debian stable) mailing list for notmuch (https://notmuchmail.org) It's our main method of reviewing, so we get lots of mail from git-send-email. Occasionaly people send it with Content-Transfer-Encoding 8bit. As far as I can tell what happens then is mailman3 re-encodes it as base64, taking the line endings as CRLF. git-am is unable to apply the patches that have been re-encoded. This seems somewhat related to [1]. Like one commentator there, I would be happy to be able to turn off the re-encoding, although I have the feeling from playing with the python email libraries that this might not be that easy. I'm writing in hope that someone can suggest another workaround, perhaps some kind line-ending rewriting before base64 encoding. I guess with 8bit transfer encoding there probably isn't a clear distinction between the line-endings on the wire, and the intended line-endings for delivery, but it could be inferred from the "X-Mailer: git-send-email" header. As a test, I sent the same patch through our mailman instance with Content-Transfer-Encoding base64 and that applies fine, since the original \n line endings are inside the base64 container. It's a known mis-feature of git-am that it can handle either CRLF line endings or base64 encoding, but not the combination of both. I have a local workaround involving re-formatting the patches, but I'd really like anyone to be able to apply the patches from the list archive. [1]: https://gitlab.com/mailman/mailman/-/issues/269

2 1

Announce Only List
by joseverde＠gmail.com Aug. 14, 2020

Aug. 14, 2020

So if we want to make a list announce only (e.g. only specific folks) can post, I've found I can set the list settings to automatically discard messages from members and non-members. Then I go into the individual permissions on each user to be allowed to post without moderation. This works fine, however it seems cumbersome. My expected solution was to make the announce only members moderators - however it appears being a moderator does not give any special ability to post to the list (nor does it appear to make you a 'member' from the point of mailman when sending messages to the list, since a moderator who is not a subscriber gets treated like a nonmember from the posting permissions perspective). Is this correct?

7 9

Missing mailman archives?
by Marco Marinello Aug. 12, 2020

Aug. 12, 2020

I've recently migrated from Mailman 2 to Mailman 3 but I'm setting up Hyperkitty just now. I imported the old mbox and that worked fine but now I'm missing the mails in the time between Mailman 3 started working and now: mailman config reports [paths.custom] var_dir: /opt/mailman/var But root@mm:/opt/mailman/var# find . . [OMISS] ./archives Where are the e-mails? Can I import them into Hyperkitty? Thanks, Marco

2 6

Hold messages that have binary attachments
by Quanah Gibson-Mount Aug. 12, 2020

Aug. 12, 2020

Is there a way to configure a list automatically put a hold on messages that have binary attachments such as jpgs, pngs, etc? Thanks, Quanah -- Quanah Gibson-Mount Product Architect Symas Corporation Packaged, certified, and supported LDAP solutions powered by OpenLDAP: <http://www.symas.com>

2 2

How to Unshunt Specific Message ?
by Shashikanth Komandoor Aug. 12, 2020

Aug. 12, 2020

Hi Team, I am currently running Mailman 3 with version 3.3.1 and in built postfix version 2.10.1-6 on RHEL 7.5 in production environment from the past 3 months almost. I learnt how to unshunt the messages that got unshunted in mailman 3. But the command *mailman unshunt* would unshunt all the messages in the shunt queue. I want only a specific message to be unshunted and resent. I don't find my requirement reached with the help of *mailman unshunt*. Please suggest. -- Thanks & Regards, Shashi Kanth.K 9052671936 <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

2 3

Removing users account
by Massimo Zappalà Aug. 11, 2020

Aug. 11, 2020

Hi everybody, is there a method that allows the list administrator to delete a user account? I run this version: Mailman Core Version 3.2.1 Mailman Core API Version 3.0 Mailman Core Python Version 3.7.3 Postorius 1.2.4 HyperKitty version 1.2.2 Thanks Max

2 2

How to create user accounts and mail addresses through CURL instead of Site Administration ?
by Shashikanth Komandoor Aug. 11, 2020

Aug. 11, 2020

Hi Team, I am currently running Mailman 3 with version 3.3.1 and in built postfix version 2.10.1-6 on RHEL 7.5 in production environment from the past 3 months almost. I am currently automating a few things using the CURL commands but only postorius related as of now. Now I have a requirement. I need to create a lot many users and their mapping email ids through Site Administration almost daily. But it is becoming to do the same through Graphical Interface. So, I just want to know the CURL commands that can be used to create the user accounts and email ids mapped to user accounts. Please do the needful. -- Thanks & Regards, Shashi Kanth.K 9052671936 <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

2 2

Better documentation for Mailman Core's config options
by Abhilash Raj Aug. 7, 2020

Aug. 7, 2020

Hey All, For the past few days, I've been trying to improve the documentation style for Mailman Core's config options. Internally, Mailman has all configurations defined in an ini formatted `schema.cfg` file, which serves as a schema for our `zope.configuration` library. We had that file simply embedded in the sphinx documentation previously as a wall of text. I ended up writing a Sphinx (our documentation generator) plugin which parses the config file and presents the same documentation with more bells and whistles so it is easier to lookup and link sections and config options.[1] The process of doing that was fun and I learnt how to write a simple sphinx plugin, so yay! It treats the comments above each config option in the ini file as it's doc and basically generates ReST text that it passes to Sphinx to parse and convert to the markup format that you see in browser. You can look at it in the source repo[2] . Do note that not all sections are documented yet, I am still figuring out what would be a good way to document template sections like `[plugins.master]` and other similar sections of that kind. [1]: https://gnu-mailman--667.org.readthedocs.build/projects/mailman/en/667/src/… ((URL is for the PR, the main doc seems like is serving the cached version from an older build). [2]: https://gitlab.com/mailman/mailman/-/blob/master/_ext/configplugin.py -- thanks, Abhilash Raj (maxking)

2 1

How to turn off Emergency Moderation for imported MM2 lists?
by Brian Carpenter Aug. 7, 2020

Aug. 7, 2020

I recently imported a number of MM2 lists into MM3. Unfortunately, the person had emergency moderation turned on for these lists. Since EM is not exposed to Postorius what can be done to reverse this? Thanks, Brian

3 6

Installation Help on Ubuntu 18
by joseverde＠gmail.com Aug. 3, 2020

Aug. 3, 2020

Hi folks, I spent many hours last night trying to get Mailman 3 up and running. I am using Ubuntu on a Digital Ocean LAMP droplet (so PHP, Apache, Sql, and Postfix are already installed). The LAMP stack works as I have a successful installation of YOURLS going on. So, I tried to use this guide (https://docs.google.com/document/d/1xIcSsoNFp2nHi7r4eQys00s9a0k2sHhu1V5Plan…) to install the Mailman3 package and got to the configuration screen (the one with all the DOS-esque GUI). I ran it but it kept saying the DB wasn't installed. Was I supposed to create SQL databases and users before running that and use those usernames/databases in the credentials it asks for? It doesn't seem like that in the way it asks the questions (since it asks to create a password) but I wasn't sure. Anywho, I tried to remove the package completely and restart but I keep spinning my wheels. So my questions: 1. Does that guide actually work? Did I just foul up the database part? 2. Is there a better way to install mailman3 with some nice step-by-step directions to follow? 3. Is there a way to completely wipe my previous installs without wiping the server? ( I didn't back up...silly I know ). I used apt-get --purge remove to uninstall mailman3 and mailman to start over, did that do the trick? Sorry for all the questions.

4 6