- Mailman-users - lists.mailman3.org

Import Archives Assistance
by Brian Carpenter Feb. 28, 2021

Feb. 28, 2021

I am working with a client in importing a large MM2 mbox file (around 1GB in size) into a Mailman 3 list using: /opt/mailman/mm/bin/django-admin hyperkitty_import --no-sync-mailman -l list@listdomain list.mbox I planned on syncing after the import. Well, the client did not have enough memory on the server for the above job and it crashed in the middle of it. I informed the client who added more memory to the VPS. I went and deleted the partial archives via Hyperkitty and proceeded with the above import job again. The job finished but it seems only the messages that were imported were those AFTER the crash happened. How can I remove the archives completely so I can rerun this mbox file in its entirety? -- Brian Carpenter Harmonylists.com Emwd.com

1 1

who request
by Vako Nicolian Feb. 27, 2021

Feb. 27, 2021

Is there a way to stop the who request to get membership list? i.e.: if we send an email to {list}-request@... with *who {password} *on the subject line, it will send the membership list to the member, I want that option to be disabled for privacy reasons. Thanks, Vako

2 1

Added two tasks for Google Summer of Code
by Stephen J. Turnbull Feb. 27, 2021

Feb. 27, 2021

Based on recent threads, I've added two tasks to our 2021 GSoC ideas page: https://wiki.list.org/DEV/Google%20Summer%20of%20Code%202021#List_Configura… https://wiki.list.org/DEV/Google%20Summer%20of%20Code%202021#User_Profile_T… Bcc'd to David and Johannes because I referred to threads starting with their posts. If you want me to paraphrase in the task description, let me know, but I preferred to do it this way to encourage applicants to join the community. (Note: we haven't been selected yet, so this isn't any more public than the archived mailing lists.) Suggestions of other GSoC tasks and refinements to existing ones welcome. However, please discuss them on the list (or to a core dev privately) unless you have GSoC experience. Google has specific requirements for Summer of Code projects, so there are a lot of important tasks that should not be on that page. If you have an enhancement that you'd definitely like to put on our agenda, and also suggest for GSoC, feel free to file an issue on the tracker and point me, Mark, or Abhilash to it. Steve

1 0

Disable archives per list
by Bernd Wurst Feb. 27, 2021

Feb. 27, 2021

Hello, we are about to migrate our Mailman 2 instance to Mailman 3. As we are hosting many (small) mailing lists for different customers, we get in trouble about future handling of mail archives. Mailman 2 just used mbox files per list and flat files for public archive, so archives do not matter apart from some storage. With hyperkitty, all messages for all lists are stored in on single database and I'm a little bit scared of a single database table with dozens of GB of data. Many of our users do not really need archiving, some customers also asked archiving to be disabled for legal reasons within their lists. Can I as the server admin disable archiving (or set other list options) in a way that the list admin can not change it via postorious? Can I have custom archiver settings per list or per domain (customer-specific hyperkitty)? regards, Bernd

3 3

Documentation for transferiering a list between mm3 and mm3
by Johannes Winter Feb. 27, 2021

Feb. 27, 2021

Hi, I didn't find any documentation on how to export list data from mm3 and import it into another mm3 instance. Have I missed something, or is it yet nonexistant? Best greetings, Johannes

5 6

Two Questions: One General, the Other Specific
by David Wilson Feb. 26, 2021

Feb. 26, 2021

Salutations; For context, I have been lurking on this site for a number of years now, in order to track the progress of this wonderful mailman3 project. Further context, I am chair of a 66 unit condominium and pay for two lists provided by EMWD.com and get a hands on feel from an mailman3 operations perspective. *Is there another site that might best communicate the future goals, plans, objectives, and time frames for mailman3 or is the status of the project at the state of being primarily reacting to problems, as evidenced in this problem solving forum, at least as it seems to me, with no offense meant or intended?* Something I find surprising is a problem described in an image grab below relating to an inability to amend a list entry to include a name to be associated with an email address, as if the data needs to be immutable. When a workaround was unsuccessfully explored to delete the entry and then resubmit an amended entry but with the same already deleted email address, that was still refused, presumably because of pointers to archived data don't permit, but this seems like a particularly onerous restriction, or perhaps even a bug, or at least a severe design constraint. *Is this item on an existing to do list?* *Comments please?* Thank you in advance for any responses to the questions in bold to facilitate faster reading, etc. Best regards. Dave Wilson ------------------------------------------------------------------------

3 2

missing links in admin request mail Fwd: New subscription request to Mm3-test-mem from hstahl@uw.edu
by Stephen Willey Mats Mats Feb. 25, 2021

Feb. 25, 2021

Mailman2 and other mailman3 installs I’ve seen included links in the moderation ‘requires approval’ or list subscription request approvals. But the messages from my mailman3 server does not have the links. What configuration am I missing? I’m running off the stable 0.3 docker images as updated this morning to the current releases (3.3.3, 1.3.4, 1.3.4) thanks, steve > From: list2-owner(a)mm3.xxx.s.uw.edu > Subject: list2(a)mm3.xxx.s.uw.edu post from xxx(a)jhmi.edu requires approval > Date: February 25, 2021 at 2:18:14 PM PST > To: list2-owner(a)mm3.xxx.s.uw.edu > > As list administrator, your authorization is requested for the > following mailing list posting: > > List: list2(a)mm3.xxx.s.uw.edu > From: xxx(a)jhmi.edu > Subject: this is a post that should be moderated > > The message is being held because: > > The message is not from a list member > > At your convenience, visit your dashboard to approve or deny the > request. > Begin forwarded message: > > From: mm3-test-mem-owner(a)mm3.xxx.s.uw.edu > Subject: New subscription request to Mm3-test-mem from xxx(a)uw.edu > Date: February 25, 2021 at 12:49:05 PM PST > To: mm3-test-mem-owner(a)mm3.xxx.s.uw.edu > > Your authorization is required for a mailing list subscription request > approval: > > For: xxx(a)uw.edu > List: mm3-test-mem(a)mm3.xxx.s.uw.edu

2 1

docker-mailman Release Schedule
by matthew＠alberti.us Feb. 25, 2021

Feb. 25, 2021

Hi, Is there an estimated date that a new docker-mailman release will be issued? I think .3.10 is still the latest, which doesn't include the latest releases of core, web, etc. Thanks.

2 2

Correcting name spellings in a list
by Morris Jones Feb. 24, 2021

Feb. 24, 2021

I typo'd some full names in a mailing list. I want to correct them ... I can't see a way to do that in the Member Options, so I thought I'd try "remove" and re-add, either from the command line or the UI. But the name gets readded with the typo intact. :( Is there a way to fix it without writing SQL? Mojo -- Morris Jones, Monrovia, CA BridgeMojo <http://bridgemojo.com> Old Town Sidewalk Astronomers <http://otastro.org> Mojo's Blog <http://mojo.whiteoaks.com>

3 3

Best guide for installing from pypi
by duane＠fairsay.com Feb. 24, 2021

Feb. 24, 2021

Hi. I've got a partial mailman3 install done and, based on the documentation, am not sure how to complete it! (this is my first time) I've installed mailman3 (3.3.3) on a Debian 10 server using python3.7, mysql, postfix, apache, etc. and have run the install using pip3 install mailman. The "mailman info" command works, version shows "3.3.3 (Tom Sawyer)" the databases creates, tables, all exist, etc. So it seems the necessary services are running. I'm running froxlor on the server to configure the non-mailman services (apache, ssl, postfix, etc). I had also tried apt install mailman-full but it was an older version, so using the pypi route ensured I was on the latest version. Looking at https://docs.mailman3.org/en/latest/install/virtualenv.html, what I can't figure out is: 1) There is no /opt/mailman/ user - the user installed seems to be "list" 2) Is a virtual environment needed for a production environment? 3) if django is setup properly or the webservice is working 4) I've tried to connect to some web interface (posterious/hyperkitty/some mailman3 web frontend) via lynx to localhost:8001 on the local machine - but it has a 404 error Anyone got any tips as to next steps? (I'm also happy to pay someone to coach me through it!) Cheers, Duane

3 2