- Mailman-users - lists.mailman3.org

HyperKitty misreporting statistics
by Cameron Smith 24 Aug '17

24 Aug '17

Mailman 3, container images 0.1.1 HyperKitty 1.1.1 is showing incorrect numbers for the number of participants and the number of discussions. (All messages referred to below were submitted in August.) In one list, I have two threads. In one thread, I have three messages, each from a different email address, all submitted via email (as opposed to replying from within HyperKitty). The month page (clicking on “August”) of that list however, shows that thread as having one participant and no messages. Opening the list shows the same stats: “1 participants”, “0 comments”; all three messages are displayed. The other thread in the same list also shows one participant and no messages; it has two messages in it, one submitted via email, the other submitted via HyperKitty by a different subscriber. Opening the list shows both messages. The front page of that list shows zero participants and two discussions. A second list also has two threads with three email-submitted messages from different addresses. The monthly stats show one thread as having one participant and one message, the other as having one participant and zero messages. The front page shows one participant and one discussion. Cameron Smith

2 6

Users, members, accounts and subscribers
by Cameron Smith 24 Aug '17

24 Aug '17

Oh my! In an attempt to introduce a friend to MailMan3, I had her subscribe to a couple of lists that I set up and we exchanged a few messages via the email interface. Then I introduced her to the web interface and we were both confused when she could not log-in/sign-in and was told that her email address was not recognized. It was only later that I realized that while she was a subscriber, she hadn’t yet signed up for an account. What is the point of “accounts"? Why can someone become a subscriber, but not have an account? I find the user/member/subscriber explanation at http://mailman.readthedocs.io/en/latest/src/mailman/docs/architecture.html to be very confusing. Cameron Smith

3 3

Setting default Mailman admin (Django superuser) password in Docker-mailman
by Henrik Rasmussen 23 Aug '17

23 Aug '17

I just upgraded to Docker-mailman 0.1.1 and prior to that for some reason I had to somewhat start over, deleting my database. At both on my first and second attempt I wondered what the Django admin password would be. According to https://github.com/maxking/docker-mailman/ and https://github.com/maxking/docker-mailman/blob/master/web/README.md, setting MAILMAN_ADMIN_USER and MAILMAN_ADMIN_EMAIL in docker-compose.yaml will create a username for the admin user by default, but it doesn't mentioning setting a variable for the password. Creating a superuser using docker exec -it mailman-web python manage.py createsuperuser would normally request the password for the user indicated, but user "mailman" has already been registred. So to get to know the superuser password, I reset it using https://stackoverflow.com/questions/6358030/how-to-reset-django-admin-passw…. Why don't the installation guide on https://github.com/maxking/docker-mailman/ mention anything about how to set the password in the docker-compose.yaml file? -- Henrik Rasmussen <her(a)adm.ku.dk<mailto:her@adm.ku.dk>> Copenhagen, Danmark

2 1

Possible bug in Mailman 3.1 (Docker-mailman 0.1)
by Henrik Rasmussen 21 Aug '17

21 Aug '17

Mailman 3.1, docker-mailman 0.1 While I was trying to automate distribution of the files in /opt/mailman/core/var/data/postfix_domains I found what I think must be a bug. Adding a new mail list (or deleting one) _does_ update the Postfix files /opt/mailman/core/var/data/ ,but adding a new mail domain does not. This is OK. But deleting a mail domain that have lists associated to it * does not issue a warning other than "Are you sure you want to permanently delete this domain?" which is not different from deleting mail domains without lists associated to it. * the associated lists disappears both from the web interface Lists view and from the output of the "docker exec -it mailman-core mailman lists" command * the files in /opt/mailman/core/var/data/ is not updated even the lists is being deleted. 1. Deleting a mail domain with associated lists should issue a warning that it has lists associated to it. 2. The files in /opt/mailman/core/var/data/ should be updated according to the deleted lists / domains. 3. Actually I think it should be impossible to accidentally delete a mail domain with lists associated to it. Regards Henrik Rasmussen

2 2

Re: Which documentation to follow for installation
by Ruben Ibanez 20 Aug '17

20 Aug '17

Hi Abhilash, Thanks for your reply. The point is, I think I'm missing something. I'm just a sysadmin who wants to deploy Mailman 3.x to be used for an operational environment, like any other software. Is this software actually ready for that? Of course, I'm not asking for .rpm, .deb, etc... because I understand that's quite complex, but I tried it following all available guides, including the Contributor's Guide, and it seems impossible to get it running at the first time (or just to get it running) without getting crazy or fixing lots of unexpected errors during installation. Have you tried to deploy Mailman 3.x strictly following the documentation? By the way, many thanks for your hard work! Cheers, RI From: "Abhilash Raj" <maxking(a)asynchronous.in> To: ribanez(a)sciops.esa.int Cc: mailman-users(a)mailman3.org Sent: Saturday, August 19, 2017 8:55:20 AM Subject: Re: [MM3-users] Which documentation to follow for installation On Fri, 18 Aug 2017 09:40:37 -0000 ribanez(a)sciops.esa.int wrote: > Hi everyone, > > I'm trying to deploy Mailman 3.1, but it seems there isn't a clear place to > look for documentation. I found two different sites: > > https://mailman.readthedocs.io/en/latest/ > http://docs.mailman3.org/en/latest/ Both of the above are actually latest documentation, docs.mailman3.org should be the one to look for installations guidelines for the entire Mailman 3.x Suite, mailman.readthedocs.io is the documentation of Mailman 3 Core, which handles the mail. http://docs.mailman3.org/en/latest/prodsetup.html This should be the best place to start, be sure to look at the Pre-Installation Guide if you are new to the Python ecosystem. > > Do you know which one should be followed? Both at the same time? I find it > quite unclear... and this installation will be for an operational environment. > > Also, there are some (official?...) docker images, but all images are for > mailman 3.0 but not mailman 3.1, and of course updates are not guaranteed. It is meant for Mailman 3.X series and is maintained by me. It currently includes the latest releases for all the Mailman's sub-projects, also Mailman 3.1. Hope that helps! -- thanks, Abhilash Raj This message and any attachments are intended for the use of the addressee or addressees only. The unauthorised disclosure, use, dissemination or copying (either in whole or in part) of its content is not permitted. If you received this message in error, please notify the sender and delete it from your system. Emails can be altered and their integrity cannot be guaranteed by the sender. Please consider the environment before printing this email.

2 1

Which documentation to follow for installation
by ribanez＠sciops.esa.int 19 Aug '17

19 Aug '17

Hi everyone, I'm trying to deploy Mailman 3.1, but it seems there isn't a clear place to look for documentation. I found two different sites: https://mailman.readthedocs.io/en/latest/ http://docs.mailman3.org/en/latest/ Do you know which one should be followed? Both at the same time? I find it quite unclear... and this installation will be for an operational environment. Also, there are some (official?...) docker images, but all images are for mailman 3.0 but not mailman 3.1, and of course updates are not guaranteed. Thanks in advance! Regards, ribanez

2 1

Issues with starting mailman 3 outside of a virtualenv
by Leon 16 Aug '17

16 Aug '17

Hello, I wonder if this issue(https://gitlab.com/mailman/mailman/issues/3) was fixed? I try to set up a mailing list on aws ec2(ubuntu). In the instruction( http://docs.mailman3.org/en/latest/prodsetup.html), it doesn't require to install mailman in a virtual env. However, when I tried to run `mailman start`, it produces `/usr/bin/python3: can't open file '/usr/bin/master': [Errno 2] No such file or directory`. -- Best wishes, Leon

3 5

Mailman3 on FreeBSD
by John Poltorak 14 Aug '17

14 Aug '17

I'm trying to install Mailman3 on FreeBSD using http://docs.mailman3.org/en/latest/prodsetup.html The install runs but 'mailman info' returns errors. Can anyone suggest where I should look to get this sorted out?

6 13

Postgresql
by John Poltorak 13 Aug '17

13 Aug '17

What is involved in setting up Postgres to store Mailman msgs?

2 1

Mailman home
by John Poltorak 13 Aug '17

13 Aug '17

I'm still in my early stages of getting Mailman 3 up and running, and am still not sure how and where it should be installed, but what I've noticed is that the Mailman subdirectory tree gets install in the current directory when running 'mailman list'... Is that would should happen?

2 1