- Mailman-users - lists.mailman3.org

equivalent mailman 3 commands from 2.0
by bob B Oct. 25, 2021

Oct. 25, 2021

For my 2.0 environment, I have scripts to dump list info, but i can't find the equivalent in mailman 3, for some commands, for example I use: /usr/lib/mailman/bin/list_lists which equates in mailman3 to "mailman lists" /usr/lib/mailman/bin/list_members which equates in mailman3 to "mailman members [listname]" But I also use /usr/lib/mailman/bin/list_admins [listname] /usr/lib/mailman/bin/config_list [listname] Are there equivalent command line commands to get this info in mailman3? The mailman3 "mailman withlist [listname]" takes me into an interactive prompt not sure where to go from there. I can use the API curl --user [ADMIN]:[password] http://[IP]]/3.1/lists/[listname]/config | python3 -m json.tool But just curious if there is a command line equivalent like in mailman2?

2 2

Mailman and Exim 4.94.2 (Debian Bullseye)
by Andrew Hodgson Oct. 25, 2021

Oct. 25, 2021

Hi. I moved Mailman instance to a machine running Debian Bullseye last week. Ran into an issue with the Exim transport from this doc: https://docs.mailman3.org/projects/mailman/en/latest/src/mailman/docs/mta.h… The issue I ran into was that Exim wasn't able to resolve localhost in order to connect to the LMTP listener. I changed VPS provider at the same time (moved from Bytemark to Gandi) so not sure if they were doing anything different with DNS, but by default Exim doesn't use standard libraries to lookup hosts: https://www.exim.org/exim-html-current/doc/html/spec_html/ch-the_dnslookup_… I solved the issue by using the following configuration on the Mailman router: # /etc/exim4/conf.d/transport/55_mm3_transport mailman3_transport: driver = smtp protocol = lmtp allow_localhost gethostbyname hosts = localhost port = MM3_LMTP_PORT rcpt_include_affixes = true I haven't defined the lmtp settings at all in mailman.cfg meaning they are using the default settings of 127.0.0.1:8024. Is this the best modification to make to the Exim config or should I go an alternative route? Thanks. Andrew.

2 1

The MAILMAN_ARCHIVER_KEY was not sent as the Authorization HTTP header.
by Marco Marinello Oct. 25, 2021

Oct. 25, 2021

Hi everybody, as per subject, I'm getting this error in the hyperkitty log when mailman daemon tries to archive a mail. I've setup the hyperkitty.cfg file with api_key = MAILMAN_ARCHIVER_KEY in settings_local.py but still nothing. I've seen here and in GitLab issues some errors concerning a wrong api key but here it says that it wasn't sent at all. All packages installed via pip install + latest .zip release, including mailman-hyperkitty. Currently running on apache with mod_wsgi_py3 without https. Any clue? All the best, Marco Marinello

2 9

uncaught bounce messages
by David Bremner Oct. 23, 2021

Oct. 23, 2021

I'm getting (many) uncaught bounce messages for one user. Other than forcibly unsubscribing them, is there anything I can do? I hesitate to post this message publically, but here is what I can see, somewhat anonymized The MIME structure looks like └┬╴multipart/mixed 7030 bytes ├─╴text/plain 442 bytes ├─╴message/delivery-status 176 bytes └─╴text/rfc822-headers 5301 bytes In /var/log/mailman3/bounce.log I see lines like Oct 23 08:20:00 2021 (5320) Bounce message w/no discernable addresses: <hex-digits(a)foo.bar> In the delivery-status part I see Final-Recipient: rfc822; fub(a)foo.bar Action: delayed Status: 4.0.0 The initial text/plain part looks like Hi! This is the MAILER-DAEMON, please DO NOT REPLY to this email. A message is delayed for more than 4 hours for the following list of recipients: fub(a)foo.bar: Network error on destination MXs Please note that this is only a temporary failure report. The message is kept in the queue for up to 7 days. You DO NOT NEED to re-send the message to these recipients. Below is a copy of the original message:

2 1

installing a new instance of mm3
by Christian Stalberg Oct. 22, 2021

Oct. 22, 2021

Is this document that Brian Carpenter wrote still valid? https://wiki.list.org/DOC/Howto_Install_Mailman3_On_Debian10 Brian installed my instance. Now its broken. My lists are down. I'm getting nowhere with diagnostics and troubleshooting (which was easier with mailman 2). I'm considering a new install, hence the question. Thanks!

3 3

[Django] ERROR (EXTERNAL IP): Internal Server Error: /mailman3/accounts/XXXXX/login/
by Odhiambo Washington Oct. 22, 2021

Oct. 22, 2021

Where XXXXX from the subject implies github|fedora|openid|gitlab, etc, I edited my settings.py and removed those references to socialaccount auth providers, except google: INSTALLED_APPS = ( 'hyperkitty', 'postorius', 'django_mailman3', # Uncomment the next line to enable the admin: 'django.contrib.admin', # Uncomment the next line to enable admin documentation: # 'django.contrib.admindocs', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.staticfiles', 'rest_framework', 'django_gravatar', 'compressor', 'haystack', 'django_extensions', 'django_q', 'allauth', 'allauth.account', 'allauth.socialaccount', 'allauth.socialaccount.providers.google' ) On a daily basis, I get messages like below, referring to all those socialaccount auth providers that I removed. I am beginning to think that MM3 is reading a file other than that which I think it should. PS: I have restarted mailman, uwsgi, apache, and even the whole server. These messages just won't go away. Whole message here: Ubuntu Pastebin <https://pastebin.ubuntu.com/p/QPYDtXg5Fn/> -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254 7 3200 0004/+254 7 2274 3223 "Oh, the cruft.", egrep -v '^$|^.*#' :-)

3 2

Mailman3 upgrades
by dancab＠caltech.edu Oct. 21, 2021

Oct. 21, 2021

I've encountered an issue where Mailman3 is looking for an older jquery package after updating HyperKitty to 1.3.5. I found the error below via Firefox developer tools. "Loading failed for the <script> with source “https://mailman3.caltech.edu/static/hyperkitty/libs/jquery/jquery-1.10.1.min.js” Sure enough, I do not have that script. ls -l static/hyperkitty/libs/jquery/ total 692 -rw-r--r-- 1 gunicorn root 288580 Oct 19 14:55 jquery-3.6.0.js -rw-r--r-- 1 gunicorn root 89501 Oct 19 14:55 jquery-3.6.0.min.js -rw-r--r-- 1 gunicorn root 137972 Oct 19 14:55 jquery-3.6.0.min.map -rw-r--r-- 1 gunicorn root 117370 Oct 19 14:55 jquery-ui-1.10.3.custom.js -rw-r--r-- 1 gunicorn root 58173 Oct 19 14:55 jquery-ui-1.10.3.custom.min.js -rw-r--r-- 1 gunicorn root 68 Oct 19 14:55 jquery-ui-selection.txt drwxr-xr-x 1 gunicorn root 4096 Oct 19 14:55 smoothness Any ideas? Thanks again for all your help. -- Dan Caltech

3 4

Out runner not sending emails, stuck on recvFrom.
by 01ste02＠gmail.com Oct. 20, 2021

Oct. 20, 2021

My mta is logging a connection, which times out every three minutes. The strace for the out runner shows the following: fstat(20, {st_mode=S_IFREG|0660, st_size=3063808, ...}) = 0 stat("/var/lib/mailman3/data/mailman.db", {st_mode=S_IFREG|0660, st_size=3063808, ...}) = 0 pread64(20, "SQLite format 3\0\20\0\1\1\0@ \0\0\1\32\0\0\2\354"..., 100, 0) = 100 fcntl(20, F_SETLK, {l_type=F_RDLCK, l_whence=SEEK_SET, l_start=1073741824, l_len=1}) = 0 fcntl(20, F_SETLK, {l_type=F_RDLCK, l_whence=SEEK_SET, l_start=1073741826, l_len=510}) = 0 fcntl(20, F_SETLK, {l_type=F_UNLCK, l_whence=SEEK_SET, l_start=1073741824, l_len=1}) = 0 stat("/var/lib/mailman3/data/mailman.db-journal", 0x7fff3e9a8120) = -1 ENOENT (No such file or directory) stat("/var/lib/mailman3/data/mailman.db-wal", 0x7fff3e9a8120) = -1 ENOENT (No such file or directory) fstat(20, {st_mode=S_IFREG|0660, st_size=3063808, ...}) = 0 pread64(20, "SQLite format 3\0\20\0\1\1\0@ \0\0\1\32\0\0\2\354"..., 4096, 0) = 4096 pread64(20, "\r\0\0\0\26\2\7\0\17\212\17E\16\372\16\230\16Y\f\220\n\240\n-\t\273\tI\10\300\10o"..., 4096, 106496) = 4096 pread64(20, "\0\0\0\0changes BOOLEAN, \n\tadministr"..., 4096, 32768) = 4096 pread64(20, "\r\v\234\0\23\0\333\0\r0\n\253\n5\t\240\10\201\7\370\6\324\6e\5\340\5\4\4\206\4\24"..., 4096, 114688) = 4096 pread64(20, "\r\0\330\0\24\0\231\0\v\266\vE\n\351\t\352\t\261\10f\7\305\0073\5,\4\305\4n\3\370"..., 4096, 208896) = 4096 fcntl(20, F_SETLK, {l_type=F_UNLCK, l_whence=SEEK_SET, l_start=0, l_len=0}) = 0 fcntl(20, F_SETLK, {l_type=F_RDLCK, l_whence=SEEK_SET, l_start=1073741824, l_len=1}) = 0 fcntl(20, F_SETLK, {l_type=F_RDLCK, l_whence=SEEK_SET, l_start=1073741826, l_len=510}) = 0 fcntl(20, F_SETLK, {l_type=F_UNLCK, l_whence=SEEK_SET, l_start=1073741824, l_len=1}) = 0 stat("/var/lib/mailman3/data/mailman.db-journal", 0x7fff3e9a92f0) = -1 ENOENT (No such file or directory) pread64(20, "\0\0\1\32\0\0\2\354\0\0\0\0\0\0\0\0", 16, 24) = 16 stat("/var/lib/mailman3/data/mailman.db-wal", 0x7fff3e9a92f0) = -1 ENOENT (No such file or directory) fstat(20, {st_mode=S_IFREG|0660, st_size=3063808, ...}) = 0 pread64(20, "\n\0\0\0\20\16\270\0\17\325\17N\17\304\179\17\262\17%\17\237\17\357\17\207\17\17\17w\16\371"..., 4096, 36864) = 4096 pread64(20, "\5\0\0\0\3\17\361\0\0\0\2\301\17\373\17\366\17\361\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096, 28672) = 4096 pread64(20, "\r\0\0\0\4\0020\0\0020\f\274\10a\5H\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096, 270336) = 4096 fcntl(20, F_SETLK, {l_type=F_UNLCK, l_whence=SEEK_SET, l_start=0, l_len=0}) = 0 fcntl(20, F_SETLK, {l_type=F_RDLCK, l_whence=SEEK_SET, l_start=1073741824, l_len=1}) = 0 fcntl(20, F_SETLK, {l_type=F_RDLCK, l_whence=SEEK_SET, l_start=1073741826, l_len=510}) = 0 fcntl(20, F_SETLK, {l_type=F_UNLCK, l_whence=SEEK_SET, l_start=1073741824, l_len=1}) = 0 stat("/var/lib/mailman3/data/mailman.db-journal", 0x7fff3e9a9390) = -1 ENOENT (No such file or directory) pread64(20, "\0\0\1\32\0\0\2\354\0\0\0\0\0\0\0\0", 16, 24) = 16 stat("/var/lib/mailman3/data/mailman.db-wal", 0x7fff3e9a9390) = -1 ENOENT (No such file or directory) fstat(20, {st_mode=S_IFREG|0660, st_size=3063808, ...}) = 0 pread64(20, "\2\r \0\31\fL\24\0\0\2\25\f\306\rO\17?\r\354\16-\ro\r\302\r\6\16d\r\211"..., 4096, 192512) = 4096 pread64(20, "\n\2\241\0\177\1k\1\17<\16\236\1\360\2\206\16\203\16h\16J\16.\1k\16\17\r\360\r\327"..., 4096, 1032192) = 4096 fcntl(20, F_SETLK, {l_type=F_UNLCK, l_whence=SEEK_SET, l_start=0, l_len=0}) = 0 clock_gettime(CLOCK_REALTIME, {tv_sec=1634752684, tv_nsec=599142985}) = 0 clock_gettime(CLOCK_REALTIME, {tv_sec=1634752684, tv_nsec=599473757}) = 0 getpid() = 1262375 write(17, "Oct 20 19:58:04 2021 (1262375) U"..., 101) = 101 clock_gettime(CLOCK_REALTIME, {tv_sec=1634752684, tv_nsec=600257524}) = 0 clock_gettime(CLOCK_REALTIME, {tv_sec=1634752684, tv_nsec=601667144}) = 0 getpid() = 1262375 write(17, "Oct 20 19:58:04 2021 (1262375) C"..., 59) = 59 socket(AF_INET, SOCK_STREAM|SOCK_CLOEXEC, IPPROTO_TCP) = 21 connect(21, {sa_family=AF_INET, sin_port=htons(465), sin_addr=inet_addr("127.0.0.1")}, 16) = 0 recvfrom(21, And the mailman smtp-log shows: Oct 20 19:58:04 2021 (1262375) <163474270655.1243104.7078333516263200191@xxx> delivery to xxx@xxx failed with code 444, Connection unexpectedly closed Oct 20 19:58:04 2021 (1262375) Using agent: <mailman.mta.bulk.BulkDelivery object at 0x7f219bf93310> Oct 20 19:58:04 2021 (1262375) Connecting to 127.0.0.1:465 when it times out. The debug log also shows this: Oct 20 18:42:46 2021 (1262296) [OutgoingRunner] doing periodic Oct 20 18:42:46 2021 (1262296) [OutgoingRunner] committing transaction Oct 20 18:42:46 2021 (1262296) [OutgoingRunner] checking short circuit Oct 20 18:42:46 2021 (1262296) [OutgoingRunner] short circuiting Oct 20 18:42:46 2021 (1262296) [OutgoingRunner] ending oneloop: 29 I have no clue as to what is going on. Has anyone experienced this before?

2 1

Postorius web issues after upgrading mailman 3
by Tibor Molnar Oct. 20, 2021

Oct. 20, 2021

Hello, I hope someone could help me in relation to this issue. I have experienced some error with my mailman3 deployment (only in postorius web) after went through the upgrading procedure following https://docs.mailman3.org/en/latest/upgrade-3.2.html#upgrading-mailman-3 I believe this is nothing else then the wrong css/js files gone to the wrong directory or they aren't implemented properly. Basically some part of it works ok and some doesn't. The following web pages doesn't seem to be implementing the css/js files is Archives, Account, Posting Activity, Log in and Log out web pages. Any help would be appreciated. Regards, Tibor

3 8

How to change or create list styles
by Adam Minski Oct. 19, 2021

Oct. 19, 2021

Hello, how can I change list style defaults or create new list styles? I think the mailman shell way isn't persistent, and I would prefer some kind of config file. I have not found any helpful yet. Thx.

3 6