- Mailman-users - lists.mailman3.org

Personalization issue when no To header?
by Alan So 08 Oct '19

08 Oct '19

We have ported a number of lists from mailman 2 to mailman 3 earlier. We cannot find any personalization setting in the mailman 3 web UI or using the mailman client. It is fine as it is not essential. However, recently we notice an issue. As the lists in the mailman 2 probably have personalization turned on, it looks like that the setting are also migrated by using "mailman import21". Recently, some users start sending mail simply with Bcc without any addresses in the To header. We notice the following error: Oct 08 11:26:03 2019 (1832) Uncaught runner exception: 'to' Oct 08 11:26:03 2019 (1832) Traceback (most recent call last): File "/usr/local/lib/python3.6/site-packages/mailman/core/runner.py", line 173, in _one_iteration self._process_one_file(msg, msgdata) File "/usr/local/lib/python3.6/site-packages/mailman/core/runner.py", line 266, in _process_one_file keepqueued = self._dispose(mlist, msg, msgdata) File "/usr/local/lib/python3.6/site-packages/mailman/runners/outgoing.py", line 93, in _dispose self._func(mlist, msg, msgdata) File "/usr/local/lib/python3.6/site-packages/mailman/mta/deliver.py", line 86, in deliver refused = agent.deliver(mlist, msg, msgdata) File "/usr/local/lib/python3.6/site-packages/mailman/mta/base.py", line 163, in deliver callback(mlist, message_copy, msgdata_copy) File "/usr/local/lib/python3.6/site-packages/mailman/mta/personalized.py", line 58, in personalize_to msg.replace_header('To', formataddr((name, recipient))) File "/usr/lib64/python3.6/email/message.py", line 558, in replace_header raise KeyError(_name) KeyError: 'to' After tracing the source codes above, we suspect that the issue was caused by no To header due to personalization is turned on. Any quick suggestion of workarounds such as how to turn off personalization for all lists? We do not have much experiences with mailman shell. Thanks a lot.

1 0

Mailman 3 Internationalization setup
by Abhilash Raj 07 Oct '19

07 Oct '19

Hi All, Mailman 3 is now setup for continuous internationalization. We are using Hosted Weblate[1], which is the hosted service for the Weblate project[2]. It is actually quite nice and I've been learning how to properly document a Django project from it's documentation. Which brings me to it's documentation. Weblate has great documentation for translators[2]. The UI pretty simple and should be easy to navigate around. We have setup the workflow in a way that each commit in Gitlab generates a webhook and updates Weblate. Weblate is then able to pull all the changes in real time. To pull translations back into Gitlab, I have a custom script running every night that pulls translations (as commits) and generates pull requests against the upstream repos. Weblate has the ability to automatically push the translations back, but for security reasons, I didn't want to give a 3rd party service direct push access to our repos. I've been working on a Patch to Weblate[3], which would allow it to send translations as Merge Requests (as compared to direct-push). After it is merged and deployed at hosted.weblate.org, I hope I can retire my custom script. We have setup the following projects: - Mailman Core (https://hosted.weblate.org/projects/gnu-mailman/mailman/) - Postorius* (https://hosted.weblate.org/projects/gnu-mailman/translations/) - Hyperkitty (https://hosted.weblate.org/projects/gnu-mailman/hyperkitty/) - Django-mailman3 (https://hosted.weblate.org/projects/gnu-mailman/django-mailman3/) There should be empty .po files generated for most languages supported by Django and Mailman Core. If there are any questions or bugs related to source strings, please send out an email to mailman-developers(a)python.org. The current translation %age is pretty low, hopefully we'll be ale to get it close to Mailman 2 sometime soon :) [1]: https://hosted.weblate.org/projects/gnu-mailman/ [2]: https://docs.weblate.org/en/latest/user/translating.html [3]: https://github.com/WeblateOrg/weblate/pull/3024 [*] Yeah, the URL for Postorius is a bit weird, because it was called "translations" before. At the time, I didn't know the difference between a project and a translation component in Weblate terminologies. And they don't give out permissions to change the URL, so we're maybe stuck with it. -- thanks, Abhilash Raj (maxking)

1 0

Mailman 3 installation documentation
by Abhilash Raj 07 Oct '19

07 Oct '19

Hi All, I have been trying to work on revamping the documentation site we have at https://docs.mailman3.org. It is on https:// but I am not sure why the http->https redirect doesn't work in Readthedocs. I have set it to "serve always from https". Anyway, it might not look too different right now, but there are some small re-organizations. I have been learning some new ReST and Sphinx tricks and been trying to cross-reference and link various sections and settings. The docs site shows up Mailman's logo now (I didn't even know we could do that ;-). There is a place[1] for all supported Django settings that Postorius and Hyperkitty have. I am also planning to add some common Django settings that often people have to lookup and is not fun for people from non-python backgrounds. Hopefully, it will make lives easier for administrators. I have reverted my own stupid decision to use "sudo pip3 install" in the docs to instead use virtualenv. The installation docs are going to grow to be more comprehensive. I am also working on mailman-web project[3], which should simply installation process for all the web components using a single project and provide better guidance on Django's settings file management and howto run manage.py commands. I have added a `mailman-web` command, which, for those of you familiar with internal details of Django, is going to be our custom manage.py script. It sets up settings correctly and would hopefully reduce the pain of using `django-admin` and/or finding out the right path for `manage.py` script. It is still not ready for prime time, but it is usable. Early adopters can play with it if they like! I would really appreciate if people who have tried to manually install Mailman 3 in the past would share their experiences about what they think could be documented better. You can reply here or open an issue[2]. The user documentation are going to follow, hopefully soon :) [1]: https://docs.mailman3.org/en/latest/config-web.html#configure-postorius-hyp… [2]: https://gitlab.com/mailman/mailman-suite-doc/issues [3]: https://gitlab.com/mailman/mailman-web -- thanks, Abhilash Raj (maxking)

2 1

confirm mail rejected
by Marc Sluiter 29 Sep '19

29 Sep '19

Hi, im trying to setup mailman and have an issue: first my environment: - I’m running postfix etc with "mailcow-dockerized": https://mailcow.github.io/mailcow-dockerized-docs/ - I’m running mailman with "docker-mailman": https://asynchronous.in/docker-mailman/ I got almost everything working (with some configuration modifications, see other mail). The only thing which doesn’t work is conformation mails, they are rejected: In the logs I see that postfix is trying both "liste-confirm+extension@domain" and "liste-confirm@domain" for another lookup map of type mysql (so "recipient_delimiter" is working), but not for the mailman map of type regexp. Just a wild guess, I didn't find anything about it: can it be that “recipient_delimiter" doesn't work for “regexp" maps? For now I worked around this issue by manually modifying the confirm regex in "postfix_lmtp” to /^liste-confirm\+.*(a)domain\.tld$/ Does anyone have an idea why the regexp map isn’t working for me and at least 1 other user (see https://gitlab.com/mailman/mailman/issues/401)? Would my workaround be a long term solution which could be implemented in mailman? That would mean that mailman could work independent of the “recipient_delimiter” setting (or do I oversee something?) Thanks and greetings, Marc

4 4

Cannot show archives
by Qiuhong.Su �K秋�t 27 Sep '19

27 Sep '19

Hi all, After I setup mailman3 and run mailman-suite, I can do: 1. Register user 2. Login 3. Create new Domain 4. Create new List 5. Subscribe to the list When I try to send email to the list by run command: echo ��test email�� | mail �Cs ��test email�� test(a)example.com<mailto:test@example.com> User test can receive this email, but I cannot find it on Archives, and other members cannot receive this email too. Can anyone help me? Thank you! Regards, Qiuhong ************************************************************************* This email message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. [Delta Electronics, INC. China] *************************************************************************

4 4

Linking to a forum thread from a (news) website.
by Paul Arenson 25 Sep '19

25 Sep '19

I have been struggling to get this right and I think I have finally done it. I have a website with many opinion and news articles. I have linked from the article to a pre-written thread, such as from here: EXAMPLE WEBSITE ARTICLE https://www.tokyoprogressive.org/remembering-the-tsushima-maru-disaster-75-… to EXAMPLE THREAD ON LIST Title: Remembering the Tsushima Maru Disaster 75 Years Later https://list.tokyoprogressive.org/hyperkitty/list/discuss@list.tokyoprogres… PROBLEM The problem is that this does not show the subsequent comment that was added. And SHOW REPLIES BY DATE does not do it either. SOLUTION I figured out that all replies are listed under Re:, so if the first comment does not have the Re:, then it gets cut off. So if I click https://list.tokyoprogressive.org/hyperkitty/list/discuss@list.tokyoprogres… you will see all the subsequent posts. Since I want to post a link BEFORE anyone starts replying, I have to make my first post in the thread titled Re: EXAMPLE OF NEW POSTING STYLE Make sure the thread has a Re: in it. (Actually I made a mistake and wrote Re; and it still worked.) https://list.tokyoprogressive.org/hyperkitty/list/discuss@list.tokyoprogres… Or: https://list.tokyoprogressive.org/hyperkitty/list/discuss@list.tokyoprogres… ----------------- QUESTION Am I correct that if I want to create a thread and link to it, but make sure the first note is included, I need to make the thread title: Re: Something? -----------------

2 2

Manual setup - permissions
by Tobias Hachmer 25 Sep '19

25 Sep '19

Hello, I'm new to mailman3 and started to setup an instance from scratch per hand, but I'm struggeling running the peaces with the correct user/permissions. I can't find anything regarding running this and that with that user in the docs, so I have the following: virtualenv_dir: /opt/venvs/mailman3 Installed packages in venv: - "Django>=1.11" - "django-haystack" - "libsass" - "mailman==3.3.0" - "mailmanclient" - "mailman-hyperkitty==1.1.0" - "postorius==1.3.0" - "hyperkitty==1.3.0" - "whoosh" - "uwsgi" I have installed the core stuff in /opt/mailman3/core, all is owned by user+group "mailman3": root@host:/opt/mailman3# tree . ├── core │ ├── etc │ │ ├── hyperkitty.cfg │ │ ├── mailman.cfg │ │ └── uwsgi.ini │ ├── log │ │ ├── bounce.log │ │ ├── debug.log │ │ ├── mailman.log │ │ ├── plugins.log │ │ └── smtp.log │ └── var │ ├── archives │ │ └── hyperkitty │ │ └── spool │ │ ├── ... │ ├── cache │ ├── data │ │ ├── mailman.db │ │ ├── postfix_domains │ │ ├── postfix_domains.db │ │ ├── postfix_lmtp │ │ └── postfix_lmtp.db │ ├── lists │ │ └── admin.lists.... │ ├── locks │ ├── master.lck │ ├── master.lck|...|...|... │ ├── master.pid │ ├── message" │ │ ├── ... │ ├── queue │ │ ├── archive │ │ ├── bad │ │ ├── bounces │ │ ├── command │ │ ├── digest │ │ ├── in │ │ ├── nntp │ │ ├── out │ │ ├── pipeline │ │ ├── retry │ │ ├── shunt │ │ └── virgin │ └── templates The django project is installed in /opt/mailman3/web, all is owned by user+group "nginx": └── web └── project ├── db │ └── mailmansuite.db ├── emails ├── fulltext_index │ └── _MAIN_0.toc ├── logs │ ├── mailmansuite.log │ ├── uwsgi-error.log │ └── uwsgi.log ├── manage.py ├── __pycache__ │ ├── settings.cpython-35.pyc │ └── urls.cpython-35.pyc ├── run │ └── uwsgi.sock ├── settings.py ├── static ├── urls.py └── wsgi.py The mailman3 core ist running with user+group "mailman3". And the uwsgi service is running as root with drops privileges to user+group "nginx". Now, running the scheduled tasks (which run from user+group "nginx") for django I ran into permission problems, because the nginx user can't access/write to the needed files in /opt/mailman3/core/... If anyone of you is able to read ansible tasks, this is how I set this up via ansible: https://github.com/freifunk-mwu/ansible-ffmwu/blob/mail/roles/service-bundl… I would appreciate any hints how to run the different peaces of mailman3 with the correct user/groups/permissions. Thanks in advance, Tobias

4 4

Re: Issues with migrating from Mailman2 to Mailman 3
by Mark Sapiro 24 Sep '19

24 Sep '19

On 9/23/19 12:03 AM, Paul Arenson wrote: > Thank you Mark. > > I found my solution. Simplifies things. People do not have to even > think about subscribing….. <snip> > How does that sound? OK -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

1 0

Issues with migrating from Mailman2 to Mailman 3
by Uwe Grasshoff 23 Sep '19

23 Sep '19

Hello all, I'm currently trying to convert a Debian based mailman2 installation to a docker based mailman3 installation. I successfully running the mailman-web and mailman-core containers together with the database container but I'm struggling with the import of the old mailing lists. In the core container I'm running this two commands for every mailing list: mailman create mailman(a)example.com mailman import21 mailman(a)example.com /oldmailman/lists/mailman/config.pck Then I'm switching over to the mailman-web container and running this two commands: python3.6 manage.py hyperkitty_import -l mailman(a)example.com /oldmailman/archives/private/mailman.mbox/mailman.mbox python3.6 manage.py update_index_one_list mailman(a)example.com I'm getting no errors or something else which could indicate a problem. After that I'm looking into the web interface http://example.com/postorius/lists/ There I can only see the public mailing list and the private ones are not shown there (as expected). When I then try to login with the List Manager credentials of the lists (from mailman2) I can't login in. So I thought maybe I have to "register" myself again to than get access to the list management. So I tried that but when I filled out the form and click "Register" I'm presented with an error page which titles "Serverfehler" (Server error in german) and the message "An error occurred while processing your request." When I then go back a step and try to register again I got the error message that the username is already taken. When I then try to login I can't login I always get the "An error occurred while processing your request." page. Does anyone have an idea what point I'm missing? -- With best Regards Uwe Grasshoff

2 2

Weird response to postings after subscriptions and accounts
by Paul Arenson 23 Sep '19

23 Sep '19

I accidentally posted to a test account I had not actually used. Am reposting to my correct account. Sorry to the moderators. In my test of the two forms of signup, I am getting these unexpected results. Is it my settings or is something weird within the program itself? 1) https://list.tokyoprogressive.org/postorius/lists/discuss.list.tokyoprogres… 2) Choose "You can also subscribe without creating an account. If you wish to do so, please use the form below" 3) Then I have to approve it. They get "Welcome to the "Discuss" mailing list! To post to this list, send your email to: discuss(a)list.tokyoprogressive.org 4) But I have to approve it.I assume this is because they do not yet have a real account. And they should be listed as a NON MEMBER? 5) But even when they sign up here: https://list.tokyoprogressive.org/accounts/signup/?next=%2Fpostorius%2Flist… they get an email from my provider (NOT MY LIST????) as follows: "Hello from mailman3.emwd.com! You're receiving this e-mail because user iCloud has given yours as an e-mail address to connect their account. To confirm this is correct, go to https://list.tokyoprogressive.org/accounts/confirm-email/MTE3:1iA44k:E7w7xh… Thank you from mailman3.emwd.com! mailman3.emwd.com" 6) And this is where it gets weird. If they send from their email program and get the welcome (Welcome to the "Discuss" mailing list! To post to this list, send your email to: discuss(a)list.tokyoprogressive.org You can unsubscribe or make adjustments to your options via email by sending a message to....... I then get a notice: "Your mail to 'discuss(a)list.tokyoprogressive.org' with the subject test notice Is being held until the list moderator can review it for approval. The message is being held because: The message is not from a list member" 7) While if they send FROM THE interface it goes through. 8) What I am confused about. Signing up for an account should make them a member, right? Subscribing should make them a non member, no? But here it seems that both make them a non member. And worse, someone with an account sending from the Interface has their message get through while the same person sending from an email program has me get a notice that a non member is trying to post. Before I can move my actual members over from another mailing list provider, I want to make sure what works and what doesn't. Thanks. PS I am running out of test accounts to use to test my own setup. Thanks. paul!!!Subscribe to this list still shows up at the bottom.

4 9