- Mailman-users - lists.mailman3.org

How to see the admin password reset in docker with mailman3
by bob B 27 Apr '23

27 Apr '23

I am setting up a new environment of Mailman3 in docker. I understand I have to reset the password to set the password for admin. I go to forget the password, in the GUI and I put in the address I have listed in the docker-compose.yaml and I never get the email. I look at the mail log on the host and I do not see the smtp connections. I assume Django is not using the docker host but sending the mail directly?? Basically, where can I see the password email rest mail logs to make sure an email was sent out and where it is going?

3 3

If I manually add email addresses to a list and then delete them, how do i permanent delete them from Users?
by Mark London 25 Apr '23

25 Apr '23

I added some email addresses manually to a mailing list and then removed them. But now I can't find how to totally remove them from mailman3. They show up in the Users list. When I go to the Django interface, I don't see them listed in any selection. I thought they would show up under Emails in Hyperkitty, but they are not there. Oddly, somehow I've managed to create multiple duplicates of the same address, under Emails. Figure that one out! Thanks. - Mark 21 mrl(a)psfc.mit.edu April 25, 2023, 4:54 a.m. [Mark] afasdfa mark.lists1.psfc.mit.edu 20 mailman(a)psfc.mit.edu April 25, 2023, 4:44 a.m. [Mark] Re: tet mark.lists1.psfc.mit.edu 19 london(a)mit.edu April 25, 2023, 4:31 a.m. [Mark] tet mark.lists1.psfc.mit.edu 18 mrl(a)psfc.mit.edu April 25, 2023, 3:28 a.m. [Mark] test mark.lists1.psfc.mit.edu 17 mailman(a)psfc.mit.edu April 25, 2023, 3:27 a.m. [Mark] tet mark.lists1.psfc.mit.edu 16 mailman(a)psfc.mit.edu April 25, 2023, 3:22 a.m. [Mark] Re: foobar mark.lists1.psfc.mit.edu 15 mrl(a)psfc.mit.edu April 25, 2023, 3:21 a.m. [Mark] test mark.lists1.psfc.mit.edu 14 mrl(a)psfc.mit.edu April 25, 2023, 2:05 a.m. [Mark] ;jklj mark.lists1.psfc.mit.edu 13 mrl(a)psfc.mit.edu April 25, 2023, 1:53 a.m. [Mark] foobar mark.lists1.psfc.mit.edu 12 mrl(a)psfc.mit.edu April 25, 2023, 1:52 a.m. [Mark] test mark.lists1.psfc.mit.edu 11 mailman(a)psfc.mit.edu April 25, 2023, 1:51 a.m. [Mark] Re: test mark.lists1.psfc.mit.edu 10 mrl(a)psfc.mit.edu April 25, 2023, 1:42 a.m. [Mark] test mark.lists1.psfc.mit.edu 9 mrl(a)psfc.mit.edu April 25, 2023, 1:38 a.m. [Mark] test mark.lists1.psfc.mit.edu 8 mrl(a)psfc.mit.edu April 25, 2023, 1:40 a.m. [Mark] test mark.lists1.psfc.mit.edu 7 mailman(a)psfc.mit.edu April 25, 2023, 1:33 a.m. [Mark] foobar mark.lists1.psfc.mit.edu 6 mailman(a)psfc.mit.edu April 25, 2023, 1:32 a.m. [Mark] test mark.lists1.psfc.mit.edu 5 root(a)psfc.mit.edu April 25, 2023, 1:21 a.m. [Mark] foobar mark.lists1.psfc.mit.edu 4 root(a)psfc.mit.edu April 25, 2023, 1:20 a.m. [Mark] test mark.lists1.psfc.mit.edu 3 root(a)psfc.mit.edu April 25, 2023, 1:11 a.m. [Mark] test mark.lists1.psfc.mit.edu 2 root(a)psfc.mit.edu April 25, 2023, 1:14 a.m. [Mark] test mark.lists1.psfc.mit.edu 1 mailman(a)psfc.mit.edu April 25, 2023, 1:22 a.m. [Mark] test mark.lists1.psfc.mit.edu

5 11

Configuring sendmail without virtualtable? Is this possible?
by Mark London 25 Apr '23

25 Apr '23

I'm presently running mailman 2 on an email server, which all use @psfc.mit.edu addresses. And which uses /etc/aliases. The directions for configuring sendmail for mailman 3, specify using virtusertable. I want my new email server to also host mailman 3 on ubuntu. Is it still possible to use sendmail, given the following directions for sendmail configuration? Seems talk using might break things. Or am I wrong? https://gist.github.com/Maeglin73/72eb5b1e4ee66a383c2aa454726be9a5 Thanks for any help. - Mark

3 2

Problems getting MM3 to work
by Alain D D Williams 25 Apr '23

25 Apr '23

I have been using mailman2 for some 15 years ... decided that it is time to upgrade to MM3. I have to admit that I am finding it very hard to do so. My target is a Rocky Linux machine (AKA CentOS/RedHat). I am doing a test install in a virtual Debian 10 machine - the idea is learn how it hangs together before reimplement on Rocky (where I tie things down with SELinux). For me the biggest problem is the poor documentation - for someone who is new at MM3 and is not a Python programmer. After a few false starts I am doing a virtualenv installation as described: https://docs.mailman3.org/en/latest/install/virtualenv.html (Changes: I am using mariadb not postgresql, apache not nginx) I am trying to set up the WSGI server. It thinks that my domain is example.com ... when I 'grep -r example.com /opt/mailman' I see 11338 lines - far too many to look through. Could someone please tell me what/where I configure to enter my test domain. Thanks in advance. -- Alain Williams Linux/GNU Consultant - Mail systems, Web sites, Networking, Programmer, IT Lecturer. +44 (0) 787 668 0256 https://www.phcomp.co.uk/ Parliament Hill Computers Ltd. Registration Information: https://www.phcomp.co.uk/Contact.html #include <std_disclaimer.h>

3 3

MM3 does not receive gmail-Members!
by Paul Brenner 24 Apr '23

24 Apr '23

Hallo I need help! My MM3 sends mails via a list. However, no mails arrive at all gmail recipients. These mails also do not end up in the spam or junk folders. What do I have to do? Regards Paul

2 2

Gmail problems?
by Stephen Daniel 24 Apr '23

24 Apr '23

Mailman Gurus -- I run a number of small lists for my neighborhood association. The largest of these is ~120 users. Typical volumes are about 2 messages/day. In the past week or so a number of users who use gmail as their email client have complained that list emails have been going to spam or "promotions" folders. I've always had 1 or 2 users who had trouble receiving mails, but this seems to be a significant percentage of all gmail users. I have DMARC mitigation set to unconditional, and the DMARC action set to "Replace From: with list address". My emails are sent using google workspace as my SMTP relay. I'm trying to teach my users to whitelist the list domain, but they are not, in general, a tech-savvy bunch, so it is slow going. Anyone else suddenly having trouble with gmail? Any suggestions? Thanks!! -- Steve

9 17

how to unhold a hold message from a nonmmeber in hold list.
by Guillermo Hernandez (Oldno7) 21 Apr '23

21 Apr '23

I'm having troubles with Django and cannot access to web admin. I need to unhold a message while figures out what is happening. Searching the mailman cli help commands didn't help me. Anyone who knows how to unhold a message, please? Thanks in advance -- ___________________________________________ Mailman's content filtering has removed the following MIME parts from this message. Content-Type: image/png Name: firma-GHP-emails.png Replaced multipart/alternative part with first alternative.

3 7

MASS mailing list import - 900 ezmlm lists to Mailman
by grant＠horizonsunlimited.com 20 Apr '23

20 Apr '23

Hi, I hope someone can help. I have 900-ish, mostly small lists, basically all locations round the globe where people have volunteered to help particular people passing though. Those lists have 2 to 200 people. There are about 50 lists of up to 1000 people each we use for announcements. So two different setups, and a whole lot of manual work. I am moving from an old, now unreliable, host to a new one. Hopefully reliable, certainly cheaper, and better for privacy GDPR etc regs. Mailman is already installed, appears to be version 82?? on cPanel 108.0.15. Ezmlm, no surprise, is not. Installing and configuring it is not something trivial, also have to install gmail etc. Yuck. So, Mailman... going through to create one, I can see that 900 will be my life's work. I'm not a programmer, but reasonably technical, write html, css skills poor but adequate, command line isn't tooo scary, MySQL I don't go near. DOS batch files no problem! :) ANY IDEAS / suggestions appreciated! Thanks, Grant

4 6

Is it possible yet to install Mailman 3 for Ubuntu 22.04?
by Mark London 16 Apr '23

16 Apr '23

Is it possible yet to install Mailman 3 for Ubuntu 22.04? If not, will it be possible in the near future? Thanks. Mark

7 6

Link to account
by Lars Bjørndal 14 Apr '23

14 Apr '23

Hi, list! On one of my sites, I want to have all Mailman3 links to go under /mailman3. Even though, the Login link goes to a URL like: https://list.punktskriftutvalget.no/accounts/login/ How can I ensure it goes to https://list.punktskriftutvalget.no/mailman3/accounts/login/ Thanks, Lars

2 6