- Mailman-users - lists.mailman3.org

Can disabled users enable themself?
by Flo July 1, 2026

July 1, 2026

Hi, users can get disabled if there are too many bounces. Is there an easy possibility for the disabled users to enable themself on their own? I checked the email they get, however, there is no link. Only the owner's email address. What is the solution in such a case? Thank you for the information. Flo

2 2

Re: Why is it VERPing every message?
by Paul Tomblin June 25, 2026

June 25, 2026

On Tue, Jun 23, 2026, at 8:48 PM, Mark Sapiro wrote: > I don't know what the issue is, but even if you have personalization > off, try setting `verp_personalized_deliveries: no` in case there's some > issue there. Ok, that's weird. `mailman conf -s mta` said it was already set to no, but I added it to /etc/mailman3/mailman.cfg and now it's sending in big chunks. Which now RoadRunner is rejecting because of too many recipients in one message instead of too many simultaneous connections. Can't win with these idiots, can I? -- Paul Tomblin

3 4

Mass subscription: HTTP Error 400: 'pathlib._local.PosixPath' object does not support the context manager protocol
by Flo June 24, 2026

June 24, 2026

Hi, Debian trixie, virtualenv installation: When I entered addresses at the mass subscription field I got: HTTP Error 400: 'pathlib._local.PosixPath' object does not support the context manager protocol The addresses were subscribed though. How can I have subscription working correctly? I haven't found anything reasonable on the Internet. Thank you for your help! Flo

3 6

Why is it VERPing every message?
by Paul Tomblin June 24, 2026

June 24, 2026

So i was going down the rabbit hole of why every outgoing message for a certain 500+ member list is being VERPed, which lead to RoadRunner/Spectrum complaining about too many connections, and I tried to look at the verp configuration: (venv) *mailman@mail*:*~*$ mailman conf |grep verp [mta] verp_confirm_format: $address+$cookie [mta] verp_confirm_regexp: ^(.*<)?(?P<addr>[^+]+?)\+(?P<cookie>[^@]+)@.*$ [mta] verp_confirmations: yes [mta] verp_delimiter: + [mta] verp_delivery_interval: 1 [mta] verp_format: ${bounces}+${local}=${domain} [mta] verp_owner_notifications: yes [mta] verp_personalized_deliveries: yes [mta] verp_probe_format: $bounces+$token@$domain [mta] verp_probe_regexp: ^(?P<bounces>[^+]+?)\+(?P<token>[^@]+)@.*$ [mta] verp_probes: no [mta] verp_regexp: ^(?P<bounces>[^+]+?)\+(?P<local>[^=]+)=(?P<domain>[^@]+)@.*$ I'm quite confused about why verp_delivery_interval is 1 instead of the default 0, and why verp_probes is no. I did make sure that "Personalize" was set to None. I tried to override them in mm/var/etc/mailman.cfg, but it seems to be having no effect, even after restarting mailman. Is this not the correct syntax: [mta] verp_delivery_interval: 0 verp_probes: yes Is something else overriding my mailman.cfg setting? I do have a list:member:regular:footer but it doesn't have any user information in it, so that shouldn't cause it to do the messages individually, should it? ----------------------------- This is the ${list_name} mailing list Description: ${description} To unsubscribe send an email to ${list_name}-unsubscribe(a)browncroftna.org This message in the archives is: $hyperkitty_url -- Paul Tomblin

2 1

mailman command line?
by Paul Tomblin June 24, 2026

June 24, 2026

If I type `mailman` with no arguments, I get the whole (venv) *mailman@mail*:*~*$ mailman Usage: mailman [OPTIONS] COMMAND [ARGS]... *a* The GNU Mailman mailing list management system https://www.list.org Options: --version Show the version and exit. --run-as-root Running mailman commands as root is not recommended and mailman will refuse to run as root unless this option is specified. -C, --config FILE Configuration file to use. If not given, the environment variable MAILMAN_CONFIG_FILE is consulted and used if set. If neither are given, a default configuration file is loaded. -h, --help Show this message and exit. --- etc --- But if I type `mailman -h`, as it says in that page, I get a massive stack dump starting with File "/opt/mailman/venv/lib/python3.13/site-packages/click/core.py", line 1161, in __call__ return self.main*(*args, **kwargs)* ~~~~~~~~~*^^^^^^^^^^^^^^^^^* File "/opt/mailman/venv/lib/python3.13/site-packages/click/core.py", line 1081, in main with self.make_context*(prog_name, args, **extra)* as ctx: ~~~~~~~~~~~~~~~~~*^^^^^^^^^^^^^^^^^^^^^^^^^^* File "/opt/mailman/venv/lib/python3.13/site-packages/click/core.py", line 949, in make_context self.parse_args*(ctx, args)* ~~~~~~~~~~~~~~~*^^^^^^^^^^^* and ending with File "/opt/mailman/venv/lib/python3.13/site-packages/mailman/utilities/modules.py", line 181, in find_pluggable_components for name, plugin_config in config.plugin_configs: ^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.13/site-packages/mailman/config/config.py", line 291, in plugin_configs plugin_sections = self._config.getByCategory('plugin', []) ^^^^^^^^^^^^^^^^^^^^^^^^^^ AttributeError: 'NoneType' object has no attribute 'getByCategory' (venv) *mailman@mail*:*~*$ mailman --version GNU Mailman 3.3.11b1 (Tom Sawyer) -- Paul Tomblin

2 1

Server error,An error occurred while processing your request. - SITE_ID
by Flo June 23, 2026

June 23, 2026

Hi, I did the virtualenv installation on Debian trixie. I got mailmanweb running, created a superuser, could login into https://my.site.net/admin (after resolving CSRF errors). I created a new site (my.site.net) in Django, deleted example.com and changed SITE_ID to 0 in /etc/mailman3/settings.py . After restarting mailman3 and mailmanweb services I get Server error,An error occurred while processing your request. when I call https://my.site.net/admin again. Even if I change SITE_ID back to 1 there is no change. What have I done wrong? I haven't found any solution on the internet. And, even more important, how get I get it working again? Thank you for your help. Flo.

3 5

Shutdown problem
by Lars Bjørndal June 22, 2026

June 22, 2026

Sometimes when I reboot the machine, I experience that mailman doesn't start because the files /opt/mailman3/mm/var/locks/master.lck* isn't deleted during shutdown. Maybe one way to solve this could be to use ExecStartPre directive in the systemd service to remove the lock files. What's the best practice to solve this problem? BTW I've noticed that doing `systemctl stop mailman3` takes a very long time, 45 secs. or something like that. - Mailman 3.3.10 - Python 3.12.13 ``` /etc/systemd/system/mailman3.service [Unit] Description=GNU Mailing List Manager After=syslog.target network.target postgresql.service [Service] Type=forking PIDFile=/opt/mailman3/mm/var/master.pid User=mailman3 Group=mailman3 Environment="MAILMAN_CONFIG_FILE=/etc/mailman3/mailman.cfg" ExecStart=/opt/mailman3/venv/bin/mailman start ExecReload=/opt/mailman3/venv/bin/mailman restart ExecStop=/opt/mailman3/venv/bin/mailman stop # Tested, but have no effect on deletion of the lock file. #Restart=on-failure #RestartSec=15 [Install] WantedBy=multi-user.target ``` Lars

5 10

postfix_lmtp doesn't exist
by Flo June 17, 2026

June 17, 2026

Dear all, I am running Debian Trixie with Postfix. Now I want to install Mailman via virtualenv. All looks fine so far but when I insert transport_maps = hash:/home/mailman_var/data/postfix_lmtp local_recipient_maps = hash:/home/mailman_var/data/postfix_lmtp relay_domains = hash:/home/mailman_var/data/postfix_domains to main.cf I get an error when sending emails. Understandable, because there is no postfix_lmtp available. When will it be created? I haven't observed any error at the installation up to that point. Thanks for your help, Flo PS: I changed var_dir to /home/mailman_var because I thought data should be better at the home partition, especially as I was afraid they might take a lot of space and there is not a lot available at the root partition. I don't know if this is a good idea.

2 3

Possibly more a Postfix question than a mailman one one but...
by Paul Tomblin June 15, 2026

June 15, 2026

I want to limit the number of simultanous connections for one domain that I send email to. According ot what i've managed to find on-line, I need to put in a transport map in Postfix for that. But Mailman appears to already be using the transport map for routing incoming mail: > > transport_maps = > hash:/opt/mailman/mm/var/data/postfix_lmtp > local_recipient_maps = > proxy:unix:passwd.byname, $alias_maps, hash:/opt/mailman/mm/var/data/postfix_lmtp > relay_domains = > hash:/opt/mailman/mm/var/data/postfix_domains Can i append or pre-pend another transport file in the transport_maps listing and put in the entry for this domain that's been bouncing people off my list because of too many simultaneous connections? -- Paul Tomblin

3 7

Why aren't I getting bounce texts any more?
by Paul Tomblin June 9, 2026

June 9, 2026

I swear I used to get the exactly text of the bounce message when email to a list member bounced, but I'm not seeing it any more. Is there a setting I've overlooked? I've turned on "*Notify owner on bounce increment"* which was off for some reason. I just had 24 users bounced off a mailing list this morning for excessive bounces, and I can only think their ISP suddenly took exception to my setup somehow. It would have been nice to have to a warning when the first bounce happened. -- Paul Tomblin

3 5