- Mailman-users - lists.mailman3.org

Putting mailman3 server behind a netscaler
by Lieuallen, Thomas Otis 29 Nov '23

29 Nov '23

(I sent this a week ago, but apparently it got lost, trying to resend.) We’ve been using MM2 for eons and are working on a migration to MM3. So, bear with me as I’m still coming up to speed. I’m running MM 3.3.8 and Postorious 1.3.8. Our mailing lists include members within our organization as well as a number outside. We don’t want to expose our MM3 server directly to the open internet, so wish to hide the web portion behind our netscaler and our regular pool of web servers. Those web servers will proxy MM3 web pages on over to our MM3 machine to handle. This seems to work. Email will meander in via MX and mail relay servers. I found and followed directions in this email regarding changing URL paths: https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… So, say our MM3 server is: mm3.fqdn I am trying to publish and use urls like www.fqdn/mailman3-admin<http://www.fqdn/mailman3-admin>, www.fqdn/mailman3/lists<http://www.fqdn/mailman3/lists>. Again, that works for me. However, MM3 still has its concept of what URLs should be. I hoped I could fix that by way of templates, but I’m not sure there’s a template for everything. I added some templates, but have not replaced all. I was wondering and hoping that some central change could fix any default templates en-mass. Most recently, I changed the mailman admin email yesterday and the confirmation email directed me to mm3.fqdn/…/confirm-email/…. I looked at the stock templates and nothing there had that wording. I just looked at postorious docs and nothing jumps out at me there. 1. Have I gone down a bad rabbit hole? 2. Is there a way to change the advertised web server address? 3. Should I just continue rolling out my own templates and hope and assume that will take care of this issue? Thank you Tom Lieuallen Oregon State University

2 2

Importing archive from mm21
by Lars Bjørndal 29 Nov '23

29 Nov '23

I imported an archive from a list created in September 2013 with the following command: mailman-web hyperkitty_import -l annonsering(a)hodr.no --since 2013-09-01 <mbox file> No errors reported. I then did mailman-web update_index_one_list annonsering(a)hodr.no No, when I go to https://hodr.no/archives/list/annonsering@hodr.no/, I cannot choose mails earlier than January 2023. What's the problem, do you think? Lars

2 3

All messages to a new list/domain shunted from "in" queue with no logged exceptions
by Jered Floyd 26 Nov '23

26 Nov '23

OK -- my turn to ask a question... I created a new domain and lists in my (functioning) Mailman 3 install. Messages to these new lists are successfully delivered via LMTP to Mailman and then disappear. They are in the shunt queue, with a source queue of "in". There are no exceptions logged in my mailman.log. An example from a qfile: { '_parsemsg': False, 'envsender': 'noreply(a)[domain].com', 'lang': 'en', 'listid': '[listname].[domain].com', 'original_size': 2654, 'received_time': datetime.datetime(2023, 11, 25, 14, 0, 6, 968185), 'rule_hits': [], 'rule_misses': [], 'to_list': True, 'version': 3, 'whichq': 'in'} Unshunting the message has no effect, and no logs are generated. Any suggestions? Thanks, --Jered

3 12

Mailman3 stopped sending out mail
by Abhijith PA 22 Nov '23

22 Nov '23

Hello. Recently my mailman3 instance stopped distributing mail. But mailman's own mail (notification, digest etc) and archiving are working OK. I couldn't figure what is going wrong From mail.log --- Dec 31 10:03:20 lists postfix/smtpd[10900]: Anonymous TLS connection established from mail.xxxx.xx[5.79.72.163]: TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits) Dec 31 10:03:20 lists postfix/smtpd[10900]: Anonymous TLS connection established from mail.xxxx.xx[5.79.72.163]: TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits) Dec 31 10:03:20 lists policyd-spf[10907]: prepend Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=5.79.72.163; helo=mail.xxxx.xx; envelope-from=abhijith(a)xxxx.xx; receiver=<UNKNOWN> Dec 31 10:03:20 lists policyd-spf[10907]: prepend Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=5.79.72.163; helo=mail.xxxx.xx; envelope-from=abhijith(a)xxxx.xx; receiver=<UNKNOWN> Dec 31 10:03:21 lists postfix/smtpd[10900]: 04C2412038F: client=mail.xxxx.xx[5.79.72.163] Dec 31 10:03:21 lists postfix/smtpd[10900]: 04C2412038F: client=mail.xxxx.xx[5.79.72.163] Dec 31 10:03:21 lists postfix/cleanup[10912]: 04C2412038F: message-id=<f875c144-a23c-baa2-7de2-1b102d3e7494(a)xxxx.xx> Dec 31 10:03:21 lists postfix/cleanup[10912]: 04C2412038F: message-id=<f875c144-a23c-baa2-7de2-1b102d3e7494(a)xxxx.xx> Dec 31 10:03:21 lists opendkim[450]: 04C2412038F: s=_teknikKey d=xxxx.xx SSL Dec 31 10:03:21 lists opendkim[450]: 04C2412038F: s=_teknikKey d=xxxx.xx SSL Dec 31 10:03:21 lists postfix/smtpd[10900]: disconnect from mail.xxxx.xx[5.79.72.163] ehlo=2 starttls=1 mail=1 rcpt=1 data=1 quit=1 commands=7 Dec 31 10:03:21 lists postfix/smtpd[10900]: disconnect from mail.xxxx.xx[5.79.72.163] ehlo=2 starttls=1 mail=1 rcpt=1 data=1 quit=1 commands=7 Dec 31 10:03:21 lists postfix/qmgr[13211]: 04C2412038F: from=<abhijith(a)xxxx.xx>, size=1699, nrcpt=1 (queue active) Dec 31 10:03:21 lists postfix/qmgr[13211]: 04C2412038F: from=<abhijith(a)xxxx.xx>, size=1699, nrcpt=1 (queue active) Dec 31 10:03:21 lists postfix/lmtp[10915]: 04C2412038F: to=<test3(a)lists.yyyy.yy>, relay=127.0.0.1[127.0.0.1]:8024, delay=0.87, delays=0.62/0.02/0.04/0.2, dsn=2.0.0, status=sent (250 Ok) Dec 31 10:03:21 lists postfix/lmtp[10915]: 04C2412038F: to=<test3(a)lists.yyyy.yy>, relay=127.0.0.1[127.0.0.1]:8024, delay=0.87, delays=0.62/0.02/0.04/0.2, dsn=2.0.0, status=sent (250 Ok) Dec 31 10:03:21 lists postfix/qmgr[13211]: 04C2412038F: removed Dec 31 10:03:21 lists postfix/qmgr[13211]: 04C2412038F: removed I am not sure why 'postfix/qmgr[13211]: 04C2412038F: removed' is happening. from /var/log/mailman3/smtp.log: Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) handling connection Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) Data: b'LHLO lists.xxxx.xx' Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) Data: b'MAIL FROM:<abhijith(a)xxxx.xx>' Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) sender: abhijith(a)xxxx.xx Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) Data: b'RCPT TO:<test3(a)xxxx.xx>' Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) recip: test3(a)xxxx.xx Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) Data: b'DATA' Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) Data: b'QUIT' Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) connection lost Dec 31 10:03:21 2018 (6323) Connection lost during _handle_client() Here again I am doubtful about 'Connection lost during _handle_client()'. Please help. Abhijith PA

3 5

Re: mailman-web compress - Invalid template socialaccount/login_cancelled.html
by Michael.Sanderson＠ubc.ca 21 Nov '23

21 Nov '23

Despite earlier comments that django-allauth 0.58.1 has been released to fix this issue (and presumably 0.58.2 would have the fix as well), there appears to still be an issue. As Odhiambo indicated with django-allauth==0.57.0, mailman-web compress completes without errors. With django-allauth 0.58.1 and 0.58.2, I still get (venv) $ mailman-web compress Compressing... Error parsing template socialaccount/signup.html: socialaccount/base.html done Compressed 2 block(s) from 78 template(s) for 1 context(s). The Invalid template errors for socialaccount/login_cancelled.html and account/verified_email_required.html are gone, but we still have a parsing error. This is an installation on RHEL9 with python 3.11 based on the virtualenv installation method at https://docs.mailman3.org/en/latest/install/virtualenv.html#virtualenv-inst… Michael Sanderson

6 6

moving lists to another server
by bryan.kartzman＠yu.edu 21 Nov '23

21 Nov '23

I have both my mailman lists and django config in postgres databases. If I want to move my lists to another server that is running mailman 3, aside from copying the databases to the other server, what other things (perhaps all files under /var/lib/mailman3?, etc) would I need to bring over to the other server?

6 21

Migrating from Listserv 17 to Mailman 3
by Cooper, Robert A 21 Nov '23

21 Nov '23

Howdy! Does anyone have or know of a guide to migrate from Listserv 17, including list archives, to Mailman 3? I've found documentation on moving to Mailman 2, but those don't seem to apply to the newer version. Thanks, RobertC

2 1

copies of sent "admin" messages
by David Bremner 21 Nov '23

21 Nov '23

I'm dealing with (presumably bogus) spam reports for messages from foo-bounces(a)list.domain As far as I can tell these messages are triggered by the alleged-victim/apparent-attacker sending messages to foo-subscribe followed immediately by foo-unsubscribe. I have the size and time from postfix and/or mailman's smtp.log, but I don't have the message content. Are these messages stored somewhere by Mailman? Can I have them stored for a month or so in order to deal with these bureaucratic incidents? David

3 3

Where do I find the check_hk_archive script
by Lars Bjørndal 19 Nov '23

19 Nov '23

In https://docs.mailman3.org/en/latest/migration.html I'm adviced to run the check_hk_archive script found in hyperkitty/contrib. When trying `git clone https://gitlab.com/mailman/hyperkity`I get: Username for 'https://gitlab.com': Is it possible to get the script without an account on gitlab? Thanks, Lars -- Lars Bjørndal <lars(a)lamasti.net> Ostadalsveien 64, 0753 Oslo. Mobil: 958 37 537

2 3

configuration to send to recipients in a spread out manner to avoid being considered spam
by testeur 19 Nov '23

19 Nov '23

Hi, I s there a mean to configure the list for that emails be sent to recipients in a spread out manner to avoid being considered spam ? cause AOL, YAHOO seems to consider emails sent to recipients as spam or an "Excessively high volume of emails". there's just 40 (aol, yahoo) emails suscribed to the list. thx.

2 2