- Mailman-users - lists.mailman3.org

How to tell which lists on my server are being used?
by Bryan Kartzman Sept. 8, 2024

Sept. 8, 2024

Is there an easy way to tell which lists on my Mailman 3 installation are being used (i.e. received posts in the last two or three months)?

4 4

Setting base_url for the domain to use it in the templates.
by Timour Bakeev Sept. 8, 2024

Sept. 8, 2024

Hi all! I'm trying to use extended placeholders for the [templated texts](https://docs.mailman3.org/projects/mailman/en/latest/src/mailman/res… in the message footer that are sent to the members: > Along with these, Mailman supports placeholder as URLs for web interface when `base_url` property is set at the Domain level. These include: > domain_url - URL to homepage for a domain. > mailinglist_url - URL to homepage for a mailinglist. > held_message_url - URL to page for handling all held messages. > pending_subscriptions_url - URL to page for handling pending subscription requests. > pending_unsubscriptions_url - URL to page for handling pending unsubscriptions. The REST API docs mention `base_url` as the property of the domain: [domain URLs](https://docs.mailman3.org/projects/mailman/en/latest/src/mailman/rest… But my attempts to use REST API to set it fail: ``` curl --user 'restapi:restpass' \ -X PATCH \ -H "Content-Type: application/json" \ -H 'Accept: application/json' \ -d '{ "base_url": "https://example.net/mailman3" }' \ http://localhost:8001/3.1/domains/example.net | jq '.' { "title": "400 Bad Request", "description": "Unexpected parameters: base_url" } ``` My MM3 instance is the latest(3.3.9), provided by the maxking mailman-core docker image. It looks like there is a lot of confusion about `base_url` in general, as hyperkitty seems also use the property with the same name, for example: https://lists.mailman3.org/hyperkitty/list/mailman-users@mailman3.org/threa… So what is the correct way to get those extended placeholders to work in the templates? It's also not clear to me, what the the primary domain should be for the installation - server hostname, as in `lists.mailman3.org` or the domain, used in the mailing list(s) itself, like `mailman3.org` for mailman-users(a)mailman3.org... With best regards, Timour Bakeev

4 6

Archive not updated
by mailman3＠escapade.ch Sept. 6, 2024

Sept. 6, 2024

Hi All, Env: Debian bookworm debian pkg mailman 3.3.8-2~deb12u2 Status I moved from MM2 to MM3 Import of the archives worked, no issue problem: current emails sent to the list are not being archived. What have I done: - based on the list here I've checked different settings in the cfg files - looked for errors in the log What else can I do to solve this problem ? Many thanks in advance for your help. Manny

3 2

Can you use @list to include members in accept these non-members in v3?
by Lieuallen, Thomas Otis Sept. 5, 2024

Sept. 5, 2024

In Mailman v2, one could use @listname in ‘accept_these_nonmembers’: A line consisting of the @ character followed by a list name specifies another Mailman list in this installation, all of whose member addresses will be accepted for this list. I don’t see this option listed in version 3. Is it no longer supported/allowed? Is there another option? We often send email to lists of lists and have loved that @listname option to help us deliver email to 20+ lists without needing to approve the emails each time or reconfigure all the lists when another sender needs to be added. Thank you Tom Lieuallen Oregon State University

3 4

security app causing django Internal Server Error: /archives/search emails
by sun zi Sept. 5, 2024

Sept. 5, 2024

Greetings, I have set up a few lists and all seems to be working as expected, however I get a large number of emails due to internal server errors received when my security application is testing exploits to list URLs such as the following: https://<mylistdomain>/archives/search?sort=177120&cauft=&page=1&q=../../../../../../../../../../tmb/wditeteet424465304.txt. Is there any django logging filter changes that can be made to avoid receiving these emails? Any assistance would be greatly appreciated. Thank you!

3 3

Assistance Needed for Ubuntu 22.04 Mailman3 Installation and Configuration
by smiithjohn90＠gmail.com Aug. 31, 2024

Aug. 31, 2024

Hello Everyone, I'm trying to install Mailman3 on an Ubuntu 22.04 server right now, and I've run across a few obstacles that I'd like help with. I've followed the installation instructions, but I'm having trouble in a couple places, so I was hoping an experienced someone might help me out. This is what I have completed thus far: - I used the apt-get package manager to install Mailman3. - PostgreSQL was configured as the database backend. - Postfix was installed and set up to function as the Mail Transfer Agent (MTA). - Assemble Postorius, Hyperkitty, and the Mailman3 core. Problems I'm Having: Postorius and Hyperkitty Connectivity: I'm having problems making sure that the Mailman core is correctly connected to Postorius and Hyperkitty. I get a 502 Bad Gateway error when I try to access the web interfaces. Despite checking my specifications, I am unable to identify the problem. Problems with Email Delivery: I'm also having trouble with email delivery. Although Mailman appears to be receiving emails, it is not appearing to be sending any out. I think there might be a Postfix problem, but I'm not sure how to solve it. Generally Suggested Practices: Are there any particular security best practices I should be aware of when it comes to Mailman3 installations? I want to confirm that my configuration is both performance- and security-optimized. https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… https://www.igmguru.com/salesforce/salesforce-developer-training https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… I would be grateful for any advice or resources! It would be really beneficial if someone with a similar setup could share their settings or troubleshooting procedures. Thank you in advance.

2 1

Dist. List forwarding and DMARC Reject circumvention. Will this pattern work?
by titan160＠hotmail.com Aug. 26, 2024

Aug. 26, 2024

I would be grateful if someone could vet and verify (or guide otherwise) the following pattern please. With the major mail vendors move to DMARC - Full Reject, I have a small challenge. - We have a number of 365 Distribution List addresses. - These lists accept email from anyone and, currently, then forward those emails onto list members. - List members, however, are NOT necessarily email addresses within the list's mail domain. They might be outlook.com, Gmail, yahoo, Hotmail, username(a)local.ISP. Consequently, DMARC Reject policies are causing these emails to be marked spam as the 365 Dist. List forwarding is not doing any header manipulation. My thinking is: - I could set up a Mailman list (elists.mydomain.com) alongside the 365 Exchange mail domain (mydomain.com) - I leave inbound mail deliver to the 365 Dist. lists. - I reconfigure the (mylist(a)mydomain.com) Dist. Lists to fwd to a similarly-named Mailman address at the email sub-domain (mylist(a)elists.mydomain.com) - The Mailman list, by virtue of having to use the 365 MTA, should be able to accept all inbound from the list (mylist(a)mydomain.com). - Mailman would then need to re-write the mail headers such that the inbound email to-be-forwarded from the Mailman list, both appears to come from the (mylist(a)mydomain.com) address, and also has the 365 'mydomain.com' SPF and DKIM records. And given Mailman has to use the 365 MTA, it would actually be coming from that main mail domain. - Somewhere in there, the original sender's email address would need to be included, such that a Reply-to-All from a receiving List member would not only go back to the List, but also the original sender. My thinking is that with this pattern, I don't need to worry about inbound emails to the list address as that would simply continue to function as normal, and fwdd mails from the List to recipient list members would not be marked spam as the headers would all be good. Is my thinking good? Or am I out of my cotton-pickin' mind?

2 1

Issue with mailman auto subscription
by Francisco Paco López Aug. 26, 2024

Aug. 26, 2024

Hello, I migrated my mailman 2 instance to mailman 3 some months ago. Some users have been reporting lately that auto subscriptions don't work anymore. In the affected list both the Subscription and un subscription policies are open, which means that normally a user that sends a "subscribe" mail automatically subs to the list. This works fine for users that have been subscribed in the past but not for new users. The latter get a mail stating that a confirmation is needed ("Your confirmation is needed to join the XXXX(a)my.lists.com mailing list"). I see nothing out of the ordinary in the mailman.log file and co. Any ideas? Thanks a lot in advance [SIB logo] Francisco López Ayuso System Administrator SIB | Swiss Institute of Bioinformatics Quartier Sorge, bâtiment Amphipôle - CH 1015 Lausanne - Switzerland t +41 21 692 40 36 Francisco.Lopezayuso(a)sib.swiss - www.sib.swiss The information in this e-mail, and those ensuing, is confidential and may be legally privileged. It is intended solely for the addressee. If you are not the intended recipient, please destroy this message and notify the sender immediately.

2 1

Mailman config is not being applied
by roberto.blandino＠ibw.com.ni Aug. 26, 2024

Aug. 26, 2024

Debian: 11.10 GNU Mailman 3.3.3 (Tom Sawyer) Server version: Apache/2.4.61 (Debian) PHP 7.4.33 (cli) (built: Apr 12 2024 00:02:16) ( NTS ) I have a list and when i add a no member on the web interface and on the Non-Member options i set "Administration options" to "Accept skip other rules" when i send email from that address it keeps being moderated and when i open again the options it keeps saying "Default by list" The options are not being write on changes

2 1

systemd unit file modification: start / stop both services at once
by Ron / BCLUG Aug. 24, 2024

Aug. 24, 2024

Hi, I've made a slight adjustment to my systemd unit files for Mailman3 such that I only ever need to start / restart / stop mailman3.service and mailman3-web.service will have the same action automatically applied to it. It's called `Upholds` and binds the 2 services together. I humbly suggest it become the default. In my case, I added a file here: /etc/systemd/system/mailman3.service.d/override.conf with these lines: [Unit] Upholds = mailman3-web.service Before = mailman3-web.service Now, starting mailman3.service will *also* start mailman3-web.service. Restarting mailman3.service will *also* restart mailman3-web.service. Stopping mailman3.service will *also* stop mailman3-web.service. Those 3 lines could be placed in mailman3.service, or something like `UpheldBy=mailman3.service` could go in the mailman3-web.service. Hopefully this would make things slightly better for Mailman3 admins out there. rb

1 0