June 2024 - Mailman-users - lists.mailman3.org

MM3 generates long lines?
by peter＠chubb.wattle.id.au July 28, 2024

July 28, 2024

I'm seeing emails being dropped when mm3 talks to the local smtp server, with log errors like: 2021-06-23 15:42:24 1lvvea-007r8u-VN H=localhost (<FQDN>) [::1] F=<announce-bounces@<FQDN>> rejected after DATA: maximum allowed line length is 998 octets, got 1036 The email itself did not have such long lines AFAICT. I can disable line length checking on the mailserver, but that sounds like a recipe for the next one along to drop the email. Peter C

4 8

Held messages showing a reason not in English on the Postorious
by Alan KT So (ITSC) June 27, 2024

June 27, 2024

We just notice a held message from a user's list showing the held reason in Ukrainian, but the interface is in US English and the list's preferred language is English (USA). We could not repeat the issue. What can be the reason behind? [cid:image001.png@01DAC7B9.AF2B0400] ___________________________________________ Mailman's content filtering has removed the following MIME parts from this message. Content-Type: image/png Name: image001.png Replaced multipart/alternative part with first alternative.

3 2

A poll: "Delete this thread"
by Sam Darwin June 26, 2024

June 26, 2024

Hi, If you have a locally installed mailman3 instance, could you try (as an administrator) to visit a thread in Hyperkitty and click "Delete this thread"? Does the thread get deleted, and you return to "Recently active discussions" and everything is fine? Even just a few replies would indicate a pattern. That it's usually ok, for example. I get a spinning wheel, and "Thread matching query does not exist." HyperKitty==1.3.9, PostgreSQL, Ubuntu 22.04, memcached, gunicorn.

5 7

Problem with digests not being sent daily
by Mark June 24, 2024

June 24, 2024

Hi, I have a problem with digests not being sent daily (periodically). Mailman 3.3.9 installed in virtualenv Enable Digests = YES Send Digest Periodically = YES Digest size threshold = 0 Cron is set and is running. An error report (below) is generated and emailed. The last line in the error report says "FileNotFoundError: [Errno 2] No such file or directory ...". Setting the list's folder to 777 didn't help. Any clues on where to start looking for a solution would be greatly appreciated. Thanks, Mark /////////////////////////////////////// CRON IS SET: /////////////////////////////////////// su mailman (venv) mailman:/$ crontab -e ... 5 6 * * * /opt/mailman/venv/bin/mailman digests --periodic ... /////////////////////////////////////// CRON RUNS: /////////////////////////////////////// # tail -100 /var/log/cron.log ... 2024-06-21T06:05:01.815948+00:00 deu CRON[3105464]: (mailman) CMD (/opt/mailman/venv/bin/mailman digests --periodic) ... /////////////////////////////////////// ERROR REPORT EMAILED BY CRON: /////////////////////////////////////// Traceback (most recent call last): File "/opt/mailman/venv/bin/mailman", line 8, in <module> sys.exit(main()) ^^^^^^ File "/opt/mailman/venv/lib/python3.11/site-packages/click/core.py", line 1157, in __call__ return self.main(*args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.11/site-packages/click/core.py", line 1078, in main rv = self.invoke(ctx) ^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.11/site-packages/mailman/bin/mailman.py", line 69, in invoke return super().invoke(ctx) ^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.11/site-packages/click/core.py", line 1688, in invoke return _process_result(sub_ctx.command.invoke(sub_ctx)) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.11/site-packages/click/core.py", line 1434, in invoke return ctx.invoke(self.callback, **ctx.params) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.11/site-packages/click/core.py", line 783, in invoke return __callback(*args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.11/site-packages/click/decorators.py", line 33, in new_func return f(get_current_context(), *args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/opt/mailman/venv/lib/python3.11/site-packages/mailman/commands/cli_digests.py", line 126, in digests maybe_send_digest_now(mlist, force=True) File "/opt/mailman/venv/lib/python3.11/site-packages/mailman/app/digests.py", line 106, in maybe_send_digest_now os.rename(mailbox_path, mailbox_dest) FileNotFoundError: [Errno 2] No such file or directory: '/opt/mailman/mm/var/lists/LISTNAME.LISTDOMAIN/digest.mmdf' -> '/opt/mailman/mm/var/lists/LISTNAME.LISTDOMAIN/digest.252.14.mmdf' ////////////////////////////////////////////////////////////////////////////////

3 14

unique key violation because of case sensitivity of email address
by Jörg Schulz June 16, 2024

June 16, 2024

After updating to the most recent version of mailman-web, the migrations script issued an error: Apply all migrations: account, admin, auth, contenttypes, django_mailman3, django_q, hyperkitty, postorius, sessions, sites, socialaccount mailman-web | Running migrations: mailman-web | Traceback (most recent call last): mailman-web | File "/usr/lib/python3.12/site-packages/django/db/backends/utils.py", line 89, in _execute mailman-web | return self.cursor.execute(sql, params) mailman-web | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ mailman-web | psycopg2.errors.UniqueViolation: duplicate key value violates unique constraint "account_emailaddress_user_id_email_987c8728_uniq" mailman-web | DETAIL: Key (user_id, email)=(27, John.Doe(a)mynicedomain.de) already exists. mailman-web |(...) Digging into the db, I found the duplicate to result from a duplicate entry using john.doe(a)mynicedomain.de Obviously, the process that originally created the entry, took case sensitivity literally which doesn't seem to be the case any longer for the migration script. I fixed this by removing one of the duplicates hoping no further errors will come up.... What would have been the better approach?

2 1

running a script for the mailman-shell (to discard held messages) gives errors about a package argument for relative import
by stephan.edel＠gmx.net June 16, 2024

June 16, 2024

Our organization has been been communicating through about a dozen mailing lists, running on mailman, with ~200 subscribers, for 15-odd years. After Debian 10 LTS ran out, I had to upgrade our organisations Debian server, forcing me into mailman3. I haven't managed, yet, to get the web interface running, so I need to do the most urgent tasks in the shell for now. I have found out that, for example, to discard all held messages from the list "motor", I need to > sudo -u list mailman shell -l motor.our-server.de and in the shell, >>> from mailman.app.moderator import handle_message >>> rdb = IListRequest(m) >>> for req in rdb.held_requests: ... if req.request_type == RequestType.held_message: ... handle_message(m, req.id, Action.discard) > commit() Now, obviously, I put these exact lines in a script, so I don't have to type it out every single time, and try to run it using > sudo -u list mailman shell -l testlist.our-server.de -r ./mm_discard_held.py but that invariably gives me ------------------------ Traceback (most recent call last): File "/usr/bin/mailman", line 33, in <module> sys.exit(load_entry_point('mailman==3.3.8', 'console_scripts', 'mailman')()) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/click/core.py", line 1130, in __call__ return self.main(*args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/click/core.py", line 1055, in main rv = self.invoke(ctx) ^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/mailman/bin/mailman.py", line 69, in invoke return super().invoke(ctx) ^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/click/core.py", line 1657, in invoke return _process_result(sub_ctx.command.invoke(sub_ctx)) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/click/core.py", line 1404, in invoke return ctx.invoke(self.callback, **ctx.params) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/click/core.py", line 760, in invoke return __callback(*args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/click/decorators.py", line 26, in new_func return f(get_current_context(), *args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/mailman/commands/cli_withlist.py", line 294, in shell r = call_name(dotted_name, m, *run_args) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/mailman/utilities/modules.py", line 69, in call_name named_callable = find_name(dotted_name) ^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/mailman/utilities/modules.py", line 52, in find_name module = import_module(module_path) ^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3.11/importlib/__init__.py", line 121, in import_module raise TypeError(msg.format(name)) TypeError: the 'package' argument is required to perform a relative import for './mm_discard_held' ------------- I've tried a PYTHONPATH=/root/bin , where mm_discard_held.py lives, as suggested. I've tried moving it to the path where the mailman binary lives, as suggested. I always get the same result. What else can I do? Thank you.

2 1

mailman3 on Rocky 9 is not starting after an OS update and reboot
by dgoldsmith＠sans.org June 12, 2024

June 12, 2024

We are running mailman 3.x in a venv setup using Postgresql. The mailman service hangs during startup and eventually fails with a timeout: # systemctl status mailman3 × mailman3.service - GNU Mailing List Manager Loaded: loaded (/etc/systemd/system/mailman3.service; enabled; preset: disabled) Active: failed (Result: timeout) since Wed 2024-06-12 13:35:23 UTC; 11s ago Process: 1205 ExecStart=/opt/mailman/venv/bin/mailman start (code=killed, signal=TERM) CPU: 1.019s Jun 12 13:33:53 <hostname> systemd[1]: Starting GNU Mailing List Manager... Jun 12 13:35:23 <hostname>systemd[1]: mailman3.service: start operation timed out. Terminating. Jun 12 13:35:23 <hostname> systemd[1]: mailman3.service: Failed with result 'timeout'. Jun 12 13:35:23 <hostname> systemd[1]: Failed to start GNU Mailing List Manager. Jun 12 13:35:23 <hostname> systemd[1]: mailman3.service: Consumed 1.019s CPU time. Searching I found some similar reports where it seemed to be an issue with a stale .lck lock file. But on our system: - /var/lib/mailman is empty - /opt/mailman/mm/var/locks is empty The last entries in /opt/mailman/mm/var/logs/mailman.log is: 2024-06-12 09:23:44 -0400] [2101411] [INFO] Handling signal: term Jun 12 13:23:44 2024 (2101395) Master watcher caught SIGTERM. Exiting. [2024-06-12 13:23:44 +0000] [2101451] [INFO] Worker exiting (pid: 2101451) Jun 12 09:23:44 2024 (2101412) retry runner caught SIGTERM. Stopping. [2024-06-12 13:23:44 +0000] [2101450] [INFO] Worker exiting (pid: 2101450) Jun 12 09:23:44 2024 (2101408) nntp runner caught SIGTERM. Stopping. [2024-06-12 09:23:48 -0400] [2101411] [INFO] Shutting down: Master Jun 12 13:23:50 2024 (2101395) Master stopped Any help would be appreciated. Postgres appears to be up., Postfix is up, nginx is up. The web UI gives me the error: Something went wrong Mailman REST API not available. Please start Mailman core. Running "mailman version" hangs for a long time and then returns: $ mailman version GNU Mailman 3.3.9 (Tom Sawyer) Running "mailman status" hangs for a long time and then returns: $ mailman status GNU Mailman is not running What other logs can be checked for more detail? What possible services or file/dir permissions may have had something changed by the OS updates? Thanks, David Goldsmith

3 2

Re: Mailman3 doesn't send Mails to users (Debian12 with Plesk)
by Mark Sapiro June 11, 2024

June 11, 2024

On 6/6/24 11:22 AM, Marcus Bautze wrote: > Hi, > > Sorry, that was a wrong information in my mail . I already changed the base url to your suggestion as I wrote the mail (and forgot to change it in the mail) but i‘m getting the same error :-( I have some questions. At https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message… you say "Thank you, archiver is now starting. Now there's another problem:". Does this mean messages are being archived in HyperKitty or are they accumulating in (I think the Debian path is) /var/lib/mailman/archives/hyperkitty/spool/? At https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message… you say "The Keys are in mailman-hyperkitty.cfg and mailman-web.py and this are the same Keys." To be clear, in mailman-web.py the key is quoted and in mailman-hyperkitty.cfg it is not. E.g., in mailman-hyperkitty.cfg api_key: Some_key and in mailman-web.py MAILMAN_ARCHIVER_KEY = 'Some_key' What are your versions for mailman-hyperkitty and HyperKitty? HyperKitty >= 1.3.5 is incompatible with mailman-hyperkitty < 1.2.0 and if I recall corectly, at least one Debian package was shipped with this incompatibility -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 2

To have mailman3 start at boot, trying to configure the systemd mailman3.service unit, but having issues
by Keith Christian June 10, 2024

June 10, 2024

Hello, mailman list: Trying to add the mailman3.service unit so that mailman3 will start on system boots/reboots. Seeing different behavior with the mailman3.service unit commands vs. with the "/opt/mailman3/venv/bin/mailman" command line. Everyone on this list is more experienced than I with reading systemd error messages and Python code, so your ideas are appreciated. I am using letters and numbers to navigate the six screenshots in this email, I hope this is helpful, without being too much info. Running the following OS and Python versions. Mailman was installed with "pip install wheel mailman psycopg2-binary" per the virtual environment instructions: (venv) [keithchristian@localhost ~]$ cat /etc/redhat-release AlmaLinux release 9.4 (Seafoam Ocelot) (venv) [keithchristian@localhost ~]$ python3 -V Python 3.9.18 ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- To begin: here is the current mailman3.service unit file, taken from the "Starting Mailman automatically" portion of: https://docs.mailman3.org/en/latest/install/virtualenv.html, with all /opt/mailman/ paths set to /opt/mailman3/ for my sandbox system. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- A 1 [mailman3@localhost ~]$ cat /etc/systemd/system/mailman3.service A 2 [Unit] A 3 Description=GNU Mailing List Manager A 4 After=syslog.target network.target postgresql.service A 5 A 6 [Service] A 7 Type=forking A 8 PIDFile=/opt/mailman3/mm/var/master.pid A 9 User=mailman3 A 10 Group=mailman3 A 11 ExecStart=/opt/mailman3/venv/bin/mailman start A 12 ExecReload=/opt/mailman3/venv/bin/mailman restart A 13 ExecStop=/opt/mailman3/venv/bin/mailman stop A 14 A 15 [Install] A 16 WantedBy=multi-user.target ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Below in line B-6, systemd thinks mailman isn't running, but with the "/opt/mailman3/venv/bin/mailman" commands, line B-2 says it is. I could be misinterpreting the systemd output, however. Python not happy about some directories. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- B 1 [mailman3@localhost ~]$ /opt/mailman3/venv/bin/mailman status B 2 GNU Mailman is running (master pid: 10004) B 3 [mailman3@localhost ~]$ systemctl status mailman3.service B 4 mailman3.service - GNU Mailing List Manager B 5 Loaded: loaded (/etc/systemd/system/mailman3.service; enabled; preset: disabled) B 6 Active: failed (Result: exit-code) since Sat 2024-06-08 09:35:57 MDT; 7min ago B 7 Process: 10342 ExecStart=/opt/mailman3/venv/bin/mailman start (code=exited, status=1/FAILURE) B 8 CPU: 762ms B 9 B 10 Jun 08 09:35:57 localhost.localdomain mailman[10342]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/mailman/config/config.py", line 256, in ensure_directories_exist B 11 Jun 08 09:35:57 localhost.localdomain mailman[10342]: makedirs(directory) B 12 Jun 08 09:35:57 localhost.localdomain mailman[10342]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/mailman/utilities/filesystem.py", line 68, in makedirs B 13 Jun 08 09:35:57 localhost.localdomain mailman[10342]: os.makedirs(path, mode) B 14 Jun 08 09:35:57 localhost.localdomain mailman[10342]: File "/usr/lib64/python3.9/os.py", line 225, in makedirs B 15 Jun 08 09:35:57 localhost.localdomain mailman[10342]: mkdir(name, mode) B 16 Jun 08 09:35:57 localhost.localdomain mailman[10342]: PermissionError: [Errno 13] Permission denied: '//var/templates' B 17 Jun 08 09:35:57 localhost.localdomain systemd[1]: mailman3.service: Control process exited, code=exited, status=1/FAILURE B 18 Jun 08 09:35:57 localhost.localdomain systemd[1]: mailman3.service: Failed with result 'exit-code'. B 19 Jun 08 09:35:57 localhost.localdomain systemd[1]: Failed to start GNU Mailing List Manager. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Below, we stop mailman with the command line and check status with systemd. C-1, C-2, show stopped. I'd think systemctl status should show stopped but it doesn't. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- C 1 [mailman3@localhost ~]$ /opt/mailman3/venv/bin/mailman stop C 2 Shutting down Mailman's master runner C 3 [mailman3@localhost ~]$ systemctl status mailman3.service C 4 mailman3.service - GNU Mailing List Manager C 5 Loaded: loaded (/etc/systemd/system/mailman3.service; enabled; preset: disabled) C 6 Active: failed (Result: exit-code) since Sat 2024-06-08 09:35:57 MDT; 8min ago C 7 Process: 10342 ExecStart=/opt/mailman3/venv/bin/mailman start (code=exited, status=1/FAILURE) C 8 CPU: 762ms C 9 C 10 Jun 08 09:35:57 localhost.localdomain mailman[10342]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/mailman/config/config.py", line 256, in ensure_directories_exist C 11 Jun 08 09:35:57 localhost.localdomain mailman[10342]: makedirs(directory) C 12 Jun 08 09:35:57 localhost.localdomain mailman[10342]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/mailman/utilities/filesystem.py", line 68, in makedirs C 13 Jun 08 09:35:57 localhost.localdomain mailman[10342]: os.makedirs(path, mode) C 14 Jun 08 09:35:57 localhost.localdomain mailman[10342]: File "/usr/lib64/python3.9/os.py", line 225, in makedirs C 15 Jun 08 09:35:57 localhost.localdomain mailman[10342]: mkdir(name, mode) C 16 Jun 08 09:35:57 localhost.localdomain mailman[10342]: PermissionError: [Errno 13] Permission denied: '//var/templates' C 17 Jun 08 09:35:57 localhost.localdomain systemd[1]: mailman3.service: Control process exited, code=exited, status=1/FAILURE C 18 Jun 08 09:35:57 localhost.localdomain systemd[1]: mailman3.service: Failed with result 'exit-code'. C 19 Jun 08 09:35:57 localhost.localdomain systemd[1]: Failed to start GNU Mailing List Manager. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Below, we start mailman, the "/opt/mailman3/venv/bin/mailman" command line works, D-1 through D-5. Line D-6, the systemd status command (erroneously) shows otherwise. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- D 1 [mailman3@localhost ~]$ /opt/mailman3/venv/bin/mailman start D 2 Starting Mailman's master runner D 3 Generating MTA alias maps D 4 [mailman3@localhost ~]$ /opt/mailman3/venv/bin/mailman status D 5 GNU Mailman is running (master pid: 10457) D 6 [mailman3@localhost ~]$ systemctl status mailman3.service D 7 mailman3.service - GNU Mailing List Manager D 8 Loaded: loaded (/etc/systemd/system/mailman3.service; enabled; preset: disabled) D 9 Active: failed (Result: exit-code) since Sat 2024-06-08 09:35:57 MDT; 10min ago D 10 Process: 10342 ExecStart=/opt/mailman3/venv/bin/mailman start (code=exited, status=1/FAILURE) D 11 CPU: 762ms D 12 D 13 Jun 08 09:35:57 localhost.localdomain mailman[10342]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/mailman/config/config.py", line 256, in ensure_directories_exist D 14 Jun 08 09:35:57 localhost.localdomain mailman[10342]: makedirs(directory) D 15 Jun 08 09:35:57 localhost.localdomain mailman[10342]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/mailman/utilities/filesystem.py", line 68, in makedirs D 16 Jun 08 09:35:57 localhost.localdomain mailman[10342]: os.makedirs(path, mode) D 17 Jun 08 09:35:57 localhost.localdomain mailman[10342]: File "/usr/lib64/python3.9/os.py", line 225, in makedirs D 18 Jun 08 09:35:57 localhost.localdomain mailman[10342]: mkdir(name, mode) D 19 Jun 08 09:35:57 localhost.localdomain mailman[10342]: PermissionError: [Errno 13] Permission denied: '//var/templates' D 20 Jun 08 09:35:57 localhost.localdomain systemd[1]: mailman3.service: Control process exited, code=exited, status=1/FAILURE D 21 Jun 08 09:35:57 localhost.localdomain systemd[1]: mailman3.service: Failed with result 'exit-code'. D 22 Jun 08 09:35:57 localhost.localdomain systemd[1]: Failed to start GNU Mailing List Manager. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------------------------------------- E 1 [mailman3@localhost ~]$ /opt/mailman3/venv/bin/mailman status E 2 GNU Mailman is running (master pid: 10457) E 3 [mailman3@localhost ~]$ /opt/mailman3/venv/bin/mailman stop E 4 Shutting down Mailman's master runner E 5 [mailman3@localhost ~]$ /opt/mailman3/venv/bin/mailman start E 6 Starting Mailman's master runner E 7 Generating MTA alias maps E 8 [mailman3@localhost ~]$ systemctl status mailman3.service E 9 mailman3.service - GNU Mailing List Manager E 10 Loaded: loaded (/etc/systemd/system/mailman3.service; enabled; preset: disabled) E 11 Active: failed (Result: exit-code) since Sat 2024-06-08 09:35:57 MDT; 2h 21min ago E 12 Process: 10342 ExecStart=/opt/mailman3/venv/bin/mailman start (code=exited, status=1/FAILURE) E 13 CPU: 762ms E 14 E 15 Jun 08 09:35:57 localhost.localdomain mailman[10342]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/mailman/config/config.py", line 256, in ensure_directories_exist E 16 Jun 08 09:35:57 localhost.localdomain mailman[10342]: makedirs(directory) E 17 Jun 08 09:35:57 localhost.localdomain mailman[10342]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/mailman/utilities/filesystem.py", line 68, in makedirs E 18 Jun 08 09:35:57 localhost.localdomain mailman[10342]: os.makedirs(path, mode) E 19 Jun 08 09:35:57 localhost.localdomain mailman[10342]: File "/usr/lib64/python3.9/os.py", line 225, in makedirs E 20 Jun 08 09:35:57 localhost.localdomain mailman[10342]: mkdir(name, mode) E 21 Jun 08 09:35:57 localhost.localdomain mailman[10342]: PermissionError: [Errno 13] Permission denied: '//var/templates' E 22 Jun 08 09:35:57 localhost.localdomain systemd[1]: mailman3.service: Control process exited, code=exited, status=1/FAILURE E 23 Jun 08 09:35:57 localhost.localdomain systemd[1]: mailman3.service: Failed with result 'exit-code'. E 24 Jun 08 09:35:57 localhost.localdomain systemd[1]: Failed to start GNU Mailing List Manager. E 25 [mailman3@localhost ~]$ systemctl stop mailman3.service E 26 ==== AUTHENTICATING FOR org.freedesktop.systemd1.manage-units ==== E 27 Authentication is required to stop 'mailman3.service'. E 28 Multiple identities can be used for authentication: E 29 1. keith christian (keithchristian) E 30 2. mailman3 E 31 Choose identity to authenticate as (1-2): 2 E 32 Password: E 33 ==== AUTHENTICATION COMPLETE ==== E 34 [mailman3@localhost ~]$ systemctl status mailman3.service E 35 mailman3.service - GNU Mailing List Manager E 36 Loaded: loaded (/etc/systemd/system/mailman3.service; enabled; preset: disabled) E 37 Active: failed (Result: exit-code) since Sat 2024-06-08 09:35:57 MDT; 2h 21min ago E 38 Process: 10342 ExecStart=/opt/mailman3/venv/bin/mailman start (code=exited, status=1/FAILURE) E 39 CPU: 762ms E 40 E 41 Jun 08 09:35:57 localhost.localdomain mailman[10342]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/mailman/config/config.py", line 256, in ensure_directories_exist E 42 Jun 08 09:35:57 localhost.localdomain mailman[10342]: makedirs(directory) E 43 Jun 08 09:35:57 localhost.localdomain mailman[10342]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/mailman/utilities/filesystem.py", line 68, in makedirs E 44 Jun 08 09:35:57 localhost.localdomain mailman[10342]: os.makedirs(path, mode) E 45 Jun 08 09:35:57 localhost.localdomain mailman[10342]: File "/usr/lib64/python3.9/os.py", line 225, in makedirs E 46 Jun 08 09:35:57 localhost.localdomain mailman[10342]: mkdir(name, mode) E 47 Jun 08 09:35:57 localhost.localdomain mailman[10342]: PermissionError: [Errno 13] Permission denied: '//var/templates' E 48 Jun 08 09:35:57 localhost.localdomain systemd[1]: mailman3.service: Control process exited, code=exited, status=1/FAILURE E 49 Jun 08 09:35:57 localhost.localdomain systemd[1]: mailman3.service: Failed with result 'exit-code'. E 50 Jun 08 09:35:57 localhost.localdomain systemd[1]: Failed to start GNU Mailing List Manager. E 51 [mailman3@localhost ~]$ systemctl start mailman3.service E 52 ==== AUTHENTICATING FOR org.freedesktop.systemd1.manage-units ==== E 53 Authentication is required to start 'mailman3.service'. E 54 Multiple identities can be used for authentication: E 55 1. keith christian (keithchristian) E 56 2. mailman3 E 57 Choose identity to authenticate as (1-2): 2 E 58 Password: E 59 ==== AUTHENTICATION COMPLETE ==== E 60 Job for mailman3.service failed because the control process exited with error code. E 61 See "systemctl status mailman3.service" and "journalctl -xeu mailman3.service" for details. E 62 [mailman3@localhost ~]$ journalctl -xeu mailman3.service|tail -20 E 63 Defined-By: systemd E 64 Support: https://wiki.almalinux.org/Help-and-Support E 65 E 66 An ExecStart= process belonging to unit mailman3.service has exited. E 67 E 68 The process' exit code is 'exited' and its exit status is 1. E 69 Jun 08 11:58:52 localhost.localdomain systemd[1]: mailman3.service: Failed with result 'exit-code'. E 70 Subject: Unit failed E 71 Defined-By: systemd E 72 Support: https://wiki.almalinux.org/Help-and-Support E 73 E 74 The unit mailman3.service has entered the 'failed' state with result 'exit-code'. E 75 Jun 08 11:58:52 localhost.localdomain systemd[1]: Failed to start GNU Mailing List Manager. E 76 Subject: A start job for unit mailman3.service has failed E 77 Defined-By: systemd E 78 Support: https://wiki.almalinux.org/Help-and-Support E 79 E 80 A start job for unit mailman3.service has finished with a failure. E 81 E 82 The job identifier is 9400 and the job result is failed. E 83 E 84 [mailman3@localhost ~]$ journalctl -xeu mailman3.service|grep -a "Jun 08 11:5[0-9]:[0-9][0-9]" E 85 Jun 08 11:58:51 localhost.localdomain systemd[1]: Starting GNU Mailing List Manager... E 86 Jun 08 11:58:52 localhost.localdomain mailman[11160]: Traceback (most recent call last): E 87 Jun 08 11:58:52 localhost.localdomain mailman[11160]: File "/opt/mailman3/venv/bin/mailman", line 33, in <module> E 88 Jun 08 11:58:52 localhost.localdomain mailman[11160]: sys.exit(load_entry_point('mailman==3.3.9', 'console_scripts', 'mailman')()) E 89 Jun 08 11:58:52 localhost.localdomain mailman[11160]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/click/core.py", line 1157, in __call__ E 90 Jun 08 11:58:52 localhost.localdomain mailman[11160]: return self.main(*args, **kwargs) E 91 Jun 08 11:58:52 localhost.localdomain mailman[11160]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/click/core.py", line 1077, in main E 92 Jun 08 11:58:52 localhost.localdomain mailman[11160]: with self.make_context(prog_name, args, **extra) as ctx: E 93 Jun 08 11:58:52 localhost.localdomain mailman[11160]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/click/core.py", line 943, in make_context E 94 Jun 08 11:58:52 localhost.localdomain mailman[11160]: self.parse_args(ctx, args) E 95 Jun 08 11:58:52 localhost.localdomain mailman[11160]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/click/core.py", line 1644, in parse_args E 96 Jun 08 11:58:52 localhost.localdomain mailman[11160]: rest = super().parse_args(ctx, args) E 97 Jun 08 11:58:52 localhost.localdomain mailman[11160]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/click/core.py", line 1408, in parse_args E 98 Jun 08 11:58:52 localhost.localdomain mailman[11160]: value, args = param.handle_parse_result(ctx, opts, args) E 99 Jun 08 11:58:52 localhost.localdomain mailman[11160]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/click/core.py", line 2400, in handle_parse_result E 100 Jun 08 11:58:52 localhost.localdomain mailman[11160]: value = self.process_value(ctx, value) E 101 Jun 08 11:58:52 localhost.localdomain mailman[11160]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/click/core.py", line 2362, in process_value E 102 Jun 08 11:58:52 localhost.localdomain mailman[11160]: value = self.callback(ctx, self, value) E 103 Jun 08 11:58:52 localhost.localdomain mailman[11160]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/mailman/bin/mailman.py", line 95, in initialize_config E 104 Jun 08 11:58:52 localhost.localdomain mailman[11160]: initialize(value) E 105 Jun 08 11:58:52 localhost.localdomain mailman[11160]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/mailman/core/initialize.py", line 228, in initialize E 106 Jun 08 11:58:52 localhost.localdomain mailman[11160]: initialize_1(config_path) E 107 Jun 08 11:58:52 localhost.localdomain mailman[11160]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/mailman/core/initialize.py", line 122, in initialize_1 E 108 Jun 08 11:58:52 localhost.localdomain mailman[11160]: mailman.config.config.load(config_path) E 109 Jun 08 11:58:52 localhost.localdomain mailman[11160]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/mailman/config/config.py", line 141, in load E 110 Jun 08 11:58:52 localhost.localdomain mailman[11160]: self._post_process() E 111 Jun 08 11:58:52 localhost.localdomain mailman[11160]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/mailman/config/config.py", line 163, in _post_process E 112 Jun 08 11:58:52 localhost.localdomain mailman[11160]: self.ensure_directories_exist() E 113 Jun 08 11:58:52 localhost.localdomain mailman[11160]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/mailman/config/config.py", line 256, in ensure_directories_exist E 114 Jun 08 11:58:52 localhost.localdomain mailman[11160]: makedirs(directory) E 115 Jun 08 11:58:52 localhost.localdomain mailman[11160]: File "/opt/mailman3/venv/lib64/python3.9/site-packages/mailman/utilities/filesystem.py", line 68, in makedirs E 116 Jun 08 11:58:52 localhost.localdomain mailman[11160]: os.makedirs(path, mode) E 117 Jun 08 11:58:52 localhost.localdomain mailman[11160]: File "/usr/lib64/python3.9/os.py", line 225, in makedirs E 118 Jun 08 11:58:52 localhost.localdomain mailman[11160]: mkdir(name, mode) E 119 Jun 08 11:58:52 localhost.localdomain mailman[11160]: PermissionError: [Errno 13] Permission denied: '//var/templates' E 120 Jun 08 11:58:52 localhost.localdomain systemd[1]: mailman3.service: Control process exited, code=exited, status=1/FAILURE E 121 Jun 08 11:58:52 localhost.localdomain systemd[1]: mailman3.service: Failed with result 'exit-code'. E 122 Jun 08 11:58:52 localhost.localdomain systemd[1]: Failed to start GNU Mailing List Manager. E 123 [mailman3@localhost ~]$ ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- For the PermissionError: [Errno 13] Permission denied: '//var/templates' in Line E-119 above, every /var/tamplates directory except the last one has write permissions for mailman3, I doubt that the "/home/keithchristian/var/templates directory" had been tried. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- F 1 1716996947 drwxr-xr-x. 2 mailman3 mailman3 6 May 29 09:35 /opt/mailman3/var/templates F 2 1716999414 drwxr-xr-x. 2 mailman3 mailman3 6 May 29 10:16 /opt/mailman3/mailman_install_documentation_edits/var/templates F 3 1717774226 drwxr-xr-x. 2 mailman3 mailman3 6 Jun 7 09:30 /opt/mailman3/venv/var/templates F 4 1717779523 drwxr-xr-x. 2 keithchristian keithchristian 6 Jun 7 10:58 /home/keithchristian/var/templates ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- END OF MAILMAN INSTALL ISSUES SCREENSHOTS -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

5 6

Email to list owner on list creation only sent when using mailman create --notify command
by Perry Kollmorgen June 10, 2024

June 10, 2024

Hi, This is only a minor issue, however as a nicety for new list owners I am hoping there is work around or something I have missed. I have the following file: templates/domains/<fqdn_listname/en/domain:admin:notice:new-list.txt When I use the mailman create command with the --notify option the new owners receives an email with the correct template info from the above file. However when I use mailmanclient python bindings or Postorius to create an list, there is no email sent. Is there an option to include a notify option when using mailmanclient or the API direct perhaps ? Or even maybe a way to trigger a notification manually at some point once the list is completely setup including both short and long descriptions ? Thank you. Regards, Perry

2 2