November 2024 - Mailman-users - lists.mailman3.org

Installation Questions [Installation}
by Arte Chambers Nov. 14, 2024

Nov. 14, 2024

Hello everyone, I'm running Ubuntu 24.10 and following the Virtualenv instructions <https://docs.mailman3.org/en/latest/install/virtualenv.html#setup-mailman-u…>. When creating the mailman user per the instructions I find that the mailman user doesn't have sufficient permissions to do things later in the installation such as creating files in /etc. What steps should I take to ensure that the mailman user has the correct permissions to install the Mailman app. Thank you, Arte Chambers

5 11

Problems getting started with postorius
by Alain D D Williams Nov. 14, 2024

Nov. 14, 2024

I am having another go with mailman3, being a long time MM2 user, but am getting increasingly frustrated. I am using on Debian 12 (Bookworm) and have installed the various Debian packages - mailman3-full does that. I have successfully started the mailman3 and mailman3-web services. I went to: http://localhost/mailman3/postorius/domains/new/ 'Add a new domain' I enter a 'Mail Host' -- a domain that does exist on this machine I choose a Web host from the drop down list -- same as Mail Host I click on 'Create Domain' and the page refreshes with the same information but under the Mail Host I see in red: {"title": "500 Internal Server Error"} I eventually tracked it down. The problem was that I had signed in with an account "addw@localhost". That, for some reason, failed validation above. I hacked the database and changed to "addw(a)localhost.localdomain" and creating the new domain worked. I could send email to addw@localhost - so at the MTA level it is correct. So please can the initial account creation do the same validation as does adding a new domain. I have looked but cannot find any documentation on postorius than https://docs.mailman3.org/projects/postorius/en/latest/ which is not helpful for a user or system admin. Can you point me to something better. Regards -- Alain Williams Linux/GNU Consultant - Mail systems, Web sites, Networking, Programmer, IT Lecturer. +44 (0) 787 668 0256 https://www.phcomp.co.uk/ Parliament Hill Computers. Registration Information: https://www.phcomp.co.uk/Contact.html #include <std_disclaimer.h>

2 1

Postorius List members
by Alain D D Williams Nov. 14, 2024

Nov. 14, 2024

I have a test list with a few members. For each member it is showing me: Address, Delivery mode, Moderation action, bounce score. It is NOT showing Delivery status (Enabled, Disabled, Disabled by owner, ...). The only way of seeing this is by clicking on the email address (Subscription options). Is it possible to add delivery status to the summary where many users are shown ? I find this (on mailman 2) to be very useful, ie get a quick overview of what is happening to users. Regards -- Alain Williams Linux/GNU Consultant - Mail systems, Web sites, Networking, Programmer, IT Lecturer. +44 (0) 787 668 0256 https://www.phcomp.co.uk/ Parliament Hill Computers. Registration Information: https://www.phcomp.co.uk/Contact.html #include <std_disclaimer.h>

2 2

No e-mail distribution after import of archive
by Markus Grandpré Nov. 13, 2024

Nov. 13, 2024

Dear Mr. Sapiro, on our test system we noticed the problem that after importing a mailing list archive from a Mailman system v2.1 into a Mailman system v3.3.8, e-mails are no longer distributed via this mailing list. E-mails that are written to the list find their way into the archive, but they are not sent to any member of the list. Before the archive was imported, writing an e-mail to the list and distributing this e-mail via the list was not a problem. Unfortunately, we cannot find any indication of this issue in the log of the mailman system v3.3.8. Please help us to further analyze and solve this problem, as we are planning to import 188 archives into our new productive mailman system v3.3.8 during the next months. With kind regards, Markus Grandpré -- Markus Ludwig Grandpré Universität Konstanz Kommunikations-, Informations-, Medienzentrum (KIM) Abteilung IT-Dienste Forschung und Lehre, B803, Tel: ++49 7531 88 4342

3 7

Changes in Django admin interface are not syncing to postorius gui /database
by ulf.rapphahn＠offis.de Nov. 12, 2024

Nov. 12, 2024

Hello, I have the lasted version of mailman3 in an fresh venv installation and I am testing it for our upcoming migration from v2.1. When I add a new list in the django admin interface this list will never appear in postorius (vice versa it works). The new list is also not in both databases: SELECT * FROM mailman.mailinglist; SELECT * FROM mailmanweb.hyperkitty_mailinglist; (Why two databases are needed with redundant data?) The same when changing for example the description of an existing list in the django admin interface it doesn't change the description of the list in postorius. Vice versa it works. Changes made in postorius are also seen in django. Could please someone help me or explain this behavior? I hope it is a problem with my configuration. Thank you and regards, Ulf

4 7

Maximum recipients in an email.
by b.dirk＠gmx.de Nov. 12, 2024

Nov. 12, 2024

Hello, where can I configure the maximum recipients in an email in mailman3? In my postfix configuration is set a limit "smtpd_recipient_limit = 200" and in the mailman3 smtp.log i will get a error message like "failed with code 452, b'4.5.3 Error: too many recipients'". Mailman3 repeats the delivery for these addresses, but i would like to configure correctly. The delivery of mails is then faster. Thanks. Best regards, Dirk

2 1

Add member to a list by email
by b.dirk＠gmx.de Nov. 12, 2024

Nov. 12, 2024

Hello, I'm trying to add members by email with the following content. Recipient: testlist-request(a)xxxxxxxx.de Email content: join address=max.mustermann(a)xxxxxxxx.de After I've sent this email, it still has to be confirmed in the Postorius web interface under member requests. How can I confirm membership by email, or deactivate this confirmation for moderators? Thanks. Best regards, Dirk

2 1

Bulk delivery status change?
by Stephen Daniel Nov. 11, 2024

Nov. 11, 2024

Mistakes were made, and for while every single outbound email bounced. I've fixed the mistakes, but now in my largest and most active email list, every single user's delivery status is "Disabled by Bounces". Is there a way to bulk fix this? Or do I have to go into each user, one at a time, and fix them? Thanks! -- Steve

3 7

Postorius not HTML-decoding < to "<" characters
by Ron / BCLUG Nov. 10, 2024

Nov. 10, 2024

Andy Smith wrote on 2024-10-30 20:59: > # Block access to the signup form from Tor exit nodes. > <Location /mailman/accounts/signup> > <RequireAll> > Require all granted > Include /etc/apache2/tor-exit-list.conf > </RequireAll> > </Location> If we look at the above message, there are less-than and greater-than symbols around the Apache keywords in the email as expected. If we look at the archived version of the message, we see a slightly mangled representation: # Block access to the signup form from Tor exit nodes. <Location /mailman/accounts/signup> <RequireAll> Require all granted Include /etc/apache2/tor-exit-list.conf </RequireAll> </Location> https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message… Hopefully I've assigned the blame to Postorius accurately and no formatting nor archiving issues make the issue difficult to understand. Thanks.

3 5

Create an eml command in a plugin
by antoine.depoisier＠ikmail.com Nov. 9, 2024

Nov. 9, 2024

I try to create an EML command to allow moderators to accept a subscription request made by an address. I created this command in CLI first, to test if it works, and it works well except to send the welcome message. After that, I tried to create the EML command in my plugin, and when I'm testing this command, nothing happens. Also, when using the command EML help, my command is not shown on the email sent. Maybe I missed something to add in the configurations files. Should I add some configuration files for this command ? Here are the working tree command_eml_addmember_mailman_plugin __init__.py commands __init__.py eml_accept.py cli_test_accept.py

2 1