May 2022 - Mailman-users - lists.mailman3.org

Can login at /admin, but cannot login at the account/login page.
by pabsta＠gmail.com 11 May '22

11 May '22

Hi All, thanks for your contibution to opensource softwares. I have done the installation walkthrough on the wiki page (thanks to Brian Carpenter) and I am almost there. I can run the three services and they provide the relevant web interfaces (admin, postorius, hyperkitty). In comparison to the walkthrough, I did two changes; First, I used different port numbers , as it would otherwise conflict with other services on the server. Second, I disabled the social accounts authentification mechanisms. I am still running on sqllite, as I am still testing things (one task at a time). Using my "superuser" credentials, I can log to the admin section in a fraction of a second. The server response time is less than one second. Once logged in, I can navigate through all the site as an authenticated user, including in the postorius pages related to list management. The services work normally. However, if logout and attempt to login from the postorius website, I get a « 502 bad gateway » error after roughly 30 seconds. The logs in Systemctl for gunicorn register a "DIGEST-MD5 common mech free" error message and the nginx error logs just show a connection drop: 2021/08/12 18:11:09 [error] 26026#26026: *31 upstream prematurely closed connection while reading response header from upstream, client: [ip redacted], server: [domain redacted], request: "POST /accounts/login/ HTTP/2.0", upstream: "http://127.0.0.1:8006/accounts/login/", host: "[domain redacted]", referrer: "https://[domain redacted]/accounts/login/?next=/mailman3/lists/" Two additional clues may help understanding what is going on: 1- If I attempt to login with improper credentials, the services respond normally, and I get the expected red box with "invalid credentials" message on the postorius page. It is only when proper credentials are given that the connection fails. 2- If I attempt to register a new email adress, the services also fail to respond (although with no DIGEST-MD5 message registered). It thus seems to be a post "POST" problem, but what puzzles me is that it is not an issue for the admin page. Below the relevant sections of my settings.py page. The skipped ([...]) sections are as in the walkthrough files. In particular, the AUTH_PASSWORD_VALIDATORS, the EMAIL_BACKEND are as is and the "USE_X_FORWARDED_HOST" is still commented. ##Settings.py [...] # SECURITY WARNING: keep the secret key used in production secret! SECRET_KEY = '[redacted]' # SECURITY WARNING: don't run with debug turned on in production! DEBUG = False ADMINS = ( ('ME', 'my@email'), ) SITE_ID = 1 # Hosts/domain names that are valid for this site; required if DEBUG is False # See https://docs.djangoproject.com/en/1.8/ref/settings/#allowed-hosts ALLOWED_HOSTS = [ "localhost", # Archiving API from Mailman, keep it. "[domain]", # Add here all production URLs you may have. ] # Mailman API credentials MAILMAN_REST_API_URL = 'http://localhost:8005' MAILMAN_REST_API_USER = '[redacted]' MAILMAN_REST_API_PASS = '[redacted]' MAILMAN_ARCHIVER_KEY = '[redacted]' MAILMAN_ARCHIVER_FROM = ('127.0.0.1', '::1') # Application definition INSTALLED_APPS = ( 'hyperkitty', 'postorius', 'django_mailman3', # Uncomment the next line to enable the admin: 'django.contrib.admin', # Uncomment the next line to enable admin documentation: # 'django.contrib.admindocs', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.staticfiles', 'rest_framework', 'django_gravatar', 'compressor', 'haystack', 'django_extensions', 'django_q', 'allauth', 'allauth.account', 'allauth.socialaccount', #'django_mailman3.lib.auth.fedora', #'allauth.socialaccount.providers.openid', #'allauth.socialaccount.providers.github', #'allauth.socialaccount.providers.gitlab', #'allauth.socialaccount.providers.google', #'allauth.socialaccount.providers.facebook', #'allauth.socialaccount.providers.twitter', #'allauth.socialaccount.providers.stackexchange', ) [...] # Database # https://docs.djangoproject.com/en/1.8/ref/settings/#databases DATABASES = { 'default': { # Use 'sqlite3', 'postgresql_psycopg2', 'mysql', 'sqlite3' or 'oracle'. 'ENGINE': 'django.db.backends.sqlite3', # DB name or path to database file if using sqlite3. 'NAME': os.path.join(BASE_DIR, 'mailmansuite.db'), # The following settings are not used with sqlite3: 'USER': 'XXX', 'PASSWORD': 'XXX', # HOST: empty for localhost through domain sockets or '127.0.0.1' for # localhost through TCP. 'HOST': '', # PORT: set to empty string for default. 'PORT': '', # OPTIONS: for mysql engine only, do not use with other engines. # 'OPTIONS': {'charset': 'utf8mb4'} # Enable utf8 4-byte encodings. } } [...] # Password validation # https://docs.djangoproject.com/en/1.9/ref/settings/#auth-password-validators AUTH_PASSWORD_VALIDATORS = [ { 'NAME': 'django.contrib.auth.password_validation.UserAttributeSimilarityValidator', }, { 'NAME': 'django.contrib.auth.password_validation.MinimumLengthValidator', }, { 'NAME': 'django.contrib.auth.password_validation.CommonPasswordValidator', }, { 'NAME': 'django.contrib.auth.password_validation.NumericPasswordValidator', }, ] # Internationalization # https://docs.djangoproject.com/en/1.8/topics/i18n/ LANGUAGE_CODE = 'fr' TIME_ZONE = 'America/New_York' [...] # If you enable internal authentication, this is the address that the emails # will appear to be coming from. Make sure you set a valid domain name, # otherwise the emails may get rejected. # https://docs.djangoproject.com/en/1.8/ref/settings/#default-from-email # DEFAULT_FROM_EMAIL = "mailing-lists(a)you-domain.org" DEFAULT_FROM_EMAIL = 'username@domain' # If you enable email reporting for error messages, this is where those emails # will appear to be coming from. Make sure you set a valid domain name, # otherwise the emails may get rejected. # https://docs.djangoproject.com/en/1.8/ref/settings/#std:setting-SERVER_EMAIL # SERVER_EMAIL = 'root(a)your-domain.org' SERVER_EMAIL = 'username@domain' # Change this when you have a real email backend EMAIL_BACKEND = 'django.core.mail.backends.console.EmailBackend' [...] # # Social auth # AUTHENTICATION_BACKENDS = ( 'django.contrib.auth.backends.ModelBackend', 'allauth.account.auth_backends.AuthenticationBackend', ) # Django Allauth ACCOUNT_AUTHENTICATION_METHOD = "username_email" ACCOUNT_EMAIL_REQUIRED = True ACCOUNT_EMAIL_VERIFICATION = "mandatory" # You probably want https in production, but this is a dev setup file ACCOUNT_DEFAULT_HTTP_PROTOCOL = "https" ACCOUNT_UNIQUE_EMAIL = True # # Asynchronous tasks # Q_CLUSTER = { 'timeout': 300, 'save_limit': 100, 'retry':360, 'orm': 'default', } [...] # Only display mailing-lists from the same virtual host as the webserver FILTER_VHOST = True POSTORIUS_TEMPLATE_BASE_URL = 'http://localhost:8006' ## (End of settings.py) I'm happy to provide additional information if it can help. Best, Pier-André

7 8

How can I remove anything added by Mailman 3 to the forwarded email
by gscaglia＠ksdata.it 09 May '22

09 May '22

I need to use Mailman 3 exclusively for forwarding emails to my customers divided by type. The emails must arrive exactly as they are, without any additions, and the lists are managed only by me: the customer ignores that he is subscribed to a list and receives the message as if it were one to one. How can I remove anything added by Mailman 3 to the forwarded message, therefore also the links for managing my membership (unsubscribe and modify)? Thanks a lot, Luca

2 1

mailman3 not sending emails and archives not populating
by nyafum＠yahoo.com 07 May '22

07 May '22

Hi Mark Can you please help me resolve mailman3 issues? It was working well until recently and now no emails delivery to mailbox The first issue, not receiving email from my list, it gets removed in postfix /var/log/mailman3/smtp.log May 06 22:08:46 2022 (6713) ('127.0.0.1', 50690) handling connection May 06 22:08:46 2022 (6713) ('127.0.0.1', 50690) Data: b'LHLO rush.ai.net' May 06 22:08:46 2022 (6713) ('127.0.0.1', 50690) Data: b'MAIL FROM:<kim(a)kim.net>' May 06 22:08:46 2022 (6713) ('127.0.0.1', 50690) sender: kim(a)kim.net May 06 22:08:46 2022 (6713) ('127.0.0.1', 50690) Data: b'RCPT TO:<shiftchange@ kim.net >' May 06 22:08:46 2022 (6713) ('127.0.0.1', 50690) recip: shiftchange@ kim.net May 06 22:08:46 2022 (6713) ('127.0.0.1', 50690) Data: b'DATA' May 06 22:08:46 2022 (6713) ('127.0.0.1', 50690) Data: b'QUIT' May 06 22:08:46 2022 (6713) ('127.0.0.1', 50690) connection lost May 06 22:08:46 2022 (6713) Connection lost during _handle_client() /var/log/mail.log May 6 22:30:57 rush postfix/qmgr[1554]: C0401140119: from=< kim(a)kim.net >, size=459278, nrcpt=1 (queue active) May 6 22:30:57 rush postfix/smtpd[3872]: disconnect from ex13-3.ai.net[205.134.169.66] ehlo=2 starttls=1 mail=1 rcpt=1 bdat=1 quit=1 commands=7 May 6 22:30:58 rush postfix/lmtp[3897]: C0401140119: to=< shiftchange(a)kim.net >, relay=127.0.0.1[127.0.0.1]:8024, delay=1.3, delays=0.8/0.01/0.01/0.5, dsn=2.0.0, status=sent (250 Ok) May 6 22:30:58 rush postfix/qmgr[1554]: C0401140119: removed I think the issue is with python3, below is my mailman.log /var/log/mailman3/mailman.log May 06 23:16:02 2022 (21149) in runner started. May 06 23:17:18 2022 (21149) Uncaught runner exception: module 'time' has no attribute 'clock' May 06 23:17:18 2022 (21149) Traceback (most recent call last): File "/usr/lib/python3/dist-packages/mailman/core/runner.py", line 173, in _one_iteration self._process_one_file(msg, msgdata) File "/usr/lib/python3/dist-packages/mailman/core/runner.py", line 266, in _process_one_file keepqueued = self._dispose(mlist, msg, msgdata) File "/usr/lib/python3/dist-packages/mailman/runners/incoming.py", line 79, in _dispose process(mlist, msg, msgdata, start_chain) File "/usr/lib/python3/dist-packages/mailman/core/chains.py", line 79, in process link.function(mlist, msg, msgdata) File "/usr/lib/python3/dist-packages/mailman/chains/hold.py", line 147, in _process request_id = hold_message(mlist, msg, msgdata, SEMISPACE.join(reasons)) File "/usr/lib/python3/dist-packages/mailman/app/moderator.py", line 88, in hold_message request_id = requestsdb.hold_request( File "/usr/lib/python3/dist-packages/mailman/database/transaction.py", line 85, in wrapper return function(args[0], config.db.store, *args[1:], **kws) File "/usr/lib/python3/dist-packages/mailman/model/requests.py", line 100, in hold_request token = getUtility(IPendings).add(pendable, timedelta(days=5000)) File "/usr/lib/python3/dist-packages/mailman/database/transaction.py", line 85, in wrapper return function(args[0], config.db.store, *args[1:], **kws) File "/usr/lib/python3/dist-packages/mailman/model/pending.py", line 91, in add token = token_factory.new() File "/usr/lib/python3/dist-packages/mailman/utilities/uid.py", line 79, in new return self._next_unpredictable_id() File "/usr/lib/python3/dist-packages/mailman/utilities/uid.py", line 155, in _next_unpredictable_id x = random.random() + right_now % 1.0 + time.clock() % 1.0 AttributeError: module 'time' has no attribute 'clock' May 06 23:17:18 2022 (21149) SHUNTING: 1651893438.227104+1458f689c5f8220ef4db9f18bf3999e312675cd9 The other issue that I need help with is my archives to populate in Postorius(hyperkitty). Thanks in advance Kim

2 3

Pb with archive display
by Pierre Malard 05 May '22

05 May '22

Hello, We have a fully installed mailman3 on our Debian 11 (mailman3-full 3.3.3-1). We imported our old mailman 2.1.29-1 lists with no real problems :-) On the other hand Mailman3 does not seem to take into account the display of the archives. The contributions are indeed in the directory "/var/lib/mailman3/archives/hyperkitty/spool" but HyperKitty does not take them into account when displayed on the Web interface. Is this normal? -- Pierre Malard Responsable architectures système CDS DINAMIS/THEIA Montpellier IRD - UMR Espace-Dev - UAR CPST - IR Data-Terra Maison de la Télédétection 500 rue Jean-François Breton 34093 Montpellier Cx 5 France « La façon de donner vaut mieux que ce que l'on donne » Pierre Corneille (1606-1684) - Le menteur |\ _,,,---,,_ /,`.-'`' -. ;-;;,_ |,4- ) )-,_. ,\ ( `'-' '---''(_/--' `-'\_) πr perl -e '$_=q#: 3|\ 5_,3-3,2_: 3/,`.'"'"'`'"'"' 5-. ;-;;,_: |,A- ) )-,_. ,\ ( `'"'"'-'"'"': '"'"'-3'"'"'2(_/--'"'"' `-'"'"'\_): 24πr::#;y#:#\n#;s#(\D)(\d+)#$1x$2#ge;print' - --> Ce message n’engage que son auteur <-- ___________________________________________ Mailman's content filtering has removed the following MIME parts from this message. Replaced multipart/alternative part with first alternative.

2 3

Spam in Hyperkitty archive
by Eggert Ehmke 04 May '22

04 May '22

I have my mail server set up with spamassassin/amavis that seems to work reasonable. One particular mailing list is open for non-members, so spam is to be expected. However, even spam to this mailing list that is filtered and moved to the quarantine folder, shows up in the archive! How can I set up the spam filter so that does not happen?

2 1

add custom styles to postorius list creation menu
by Michael Hazan 03 May '22

03 May '22

Hello, When creating a list via postorius, i can see 3 style appear (announce, discussion, private). Is it possible to either create a new style and add it to that list or modify one of those style ? I’m using the virtual env setup and i have been trying to manipulate via the mailman-web shell but it doesn’t work when adding a new style. I need to delegate list creation to admins and I don’t want them to have to redo every list settings for every list they create when they are the same style. Also, coming from mailman2, you could directly set the members post moderation action when subscribing, now you can only do it via the user menu, is there a way to automate this in mm3 ? Thanks for the help. Michael

3 4

Templates do not work
by Eggert Ehmke 03 May '22

03 May '22

I created some templates in Postorius to get personalized notifications when there are moderator requests. The notifications I get seem to be the standard texts. When I look into mailman/ mm/var/templates the directory is empty. Nevertheless, the templates I create in Postorius seem to be stored (where?), they just do not work.

3 5