March 2021 - Mailman-users - lists.mailman3.org

Delayed password requests & migrating users from mm2
by Duane Raymond 17 Mar '21

17 Mar '21

Hi again, With my new mm3 instance, password reset email to members are being received many hours late or not at all. They seem to be sent fine and when I trigger one to one of my addresses, it works instantly. But many users report getting it many hours later or not at all (despite looking in spam and bulk folders). Anyone else experience this password reset mail delay/vanishing and/or have any suggestions for diagnosing it and resolving it? The main reason this is problematic is that in migrating lists from mm2, I've set a 'fake' password for them in the mm3 db and instructed members to reset their password to set a new one so they can access the list and update their subscription and/or subscribe to other lists (which they can also do without an account of course - but then lose the ability to use the web interface and access archives). So if, as an alternative, there is another way to get list members to access their account then I'm open to it. Cheers, Duane

2 1

Specifying hold reason: non-member, header filter number/regex
by Duane Raymond 16 Mar '21

16 Mar '21

Hi, Unlike in mm2, I'm finding in mm3 that is not obvious when non-member is trying to post to the list when their subject line also has a header-filter match. All it lists is that the posting has matched a header rule (which isn't quite accurate as it is a non-member) and even when it matches a header rule it doesn't say which one (which is a noted issues in the file mailman/chains/headers.py). Anyone else noticed the same and have a solution? The relevant list setting is:: Message Acceptance > Default action to take when a non-member posts to the list: Hold for moderation Should I be editing mailman/chains/headers.py or perhaps another python file in that firstory to make the hold reason more explicit? It is actually two problems I wish to solve: 1. Show when the message is held because it is a posting by a non-member (or a moderated member, etc) 2. Show what specific header filter has caused the message to be held so I know why and/or can debug the regex to be more/less specific. Cheers, Duane

2 2

Contributing to Mailman documentation
by Abhilash Raj 16 Mar '21

16 Mar '21

Hey Everyone, I have been trying to document how to propose changes to the Mailman documentation, which is hosted on ReadTheDocs. Right now, I think i have the complete flow in Gitlab documented in this page[1] and how to reach Gitlab from any page in documentation. I am sure there could be some parts that aren’t completely obvious to others. If you think I have missed a few steps or if there are issues in the doc, please feel free to reply on this thread or just open issues directly in Gitlab project[2] for documentation at docs.mailman3.org. [1]: https://docs.mailman3.org/en/latest/documentation.html [2]: https://gitlab.com/mailman/mailman-suite-doc/-/issues Hope this is helpful! -- thanks, Abhilash Raj (maxking)

2 1

problem with postorius initial setup
by John Covici 16 Mar '21

16 Mar '21

Hi. I am trying to setup postorius, but I have run into a problem. I am using the example project, except I am using postgresql instead of sqlite3. I ran python manage.py migrate which was successful. On running the development server I get: Exception in thread django-main-thread: Traceback (most recent call last): File "/usr/lib/python3.8/site-packages/django/utils/module_loading.py", line 20, in import_string return getattr(module, class_name) AttributeError: module 'postorius.middleware' has no attribute 'APICountingMiddleware' The above exception was the direct cause of the following exception: Traceback (most recent call last): File "/usr/lib/python3.8/site-packages/django/core/servers/basehttp.py", line 45, in get_internal_wsgi_application return import_string(app_path) File "/usr/lib/python3.8/site-packages/django/utils/module_loading.py", line 17, in import_string module = import_module(module_path) File "/usr/lib/python3.8/importlib/__init__.py", line 127, in import_module return _bootstrap._gcd_import(name[level:], package, level) File "<frozen importlib._bootstrap>", line 1014, in _gcd_import File "<frozen importlib._bootstrap>", line 991, in _find_and_load File "<frozen importlib._bootstrap>", line 975, in _find_and_load_unlocked File "<frozen importlib._bootstrap>", line 671, in _load_unlocked File "<frozen importlib._bootstrap_external>", line 783, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/covici/mailman_django/example_project/wsgi.py", line 17, in <module> application = get_wsgi_application() File "/usr/lib/python3.8/site-packages/django/core/wsgi.py", line 13, in get_wsgi_application return WSGIHandler() File "/usr/lib/python3.8/site-packages/django/core/handlers/wsgi.py", line 127, in __init__ self.load_middleware() File "/usr/lib/python3.8/site-packages/django/core/handlers/base.py", line 40, in load_middleware middleware = import_string(middleware_path) File "/usr/lib/python3.8/site-packages/django/utils/module_loading.py", line 22, in import_string raise ImportError('Module "%s" does not define a "%s" attribute/class' % ( ImportError: Module "postorius.middleware" does not define a "APICountingMiddleware" attribute/class The above exception was the direct cause of the following exception: Traceback (most recent call last): File "/usr/lib/python3.8/threading.py", line 932, in _bootstrap_inner self.run() File "/usr/lib/python3.8/threading.py", line 870, in run self._target(*self._args, **self._kwargs) File "/usr/lib/python3.8/site-packages/django/utils/autoreload.py", line 53, in wrapper fn(*args, **kwargs) File "/usr/lib/python3.8/site-packages/django/core/management/commands/runserver.py", line 138, in inner_run handler = self.get_handler(*args, **options) File "/usr/lib/python3.8/site-packages/django/contrib/staticfiles/management/commands/runserver.py", line 27, in get_handler handler = super().get_handler(*args, **options) File "/usr/lib/python3.8/site-packages/django/core/management/commands/runserver.py", line 65, in get_handler return get_internal_wsgi_application() File "/usr/lib/python3.8/site-packages/django/core/servers/basehttp.py", line 47, in get_internal_wsgi_application raise ImproperlyConfigured( django.core.exceptions.ImproperlyConfigured: WSGI application 'wsgi.application' could not be loaded; Error importing module. Thanks in advance for any suggestions. -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una covici(a)ccs.covici.com

3 4

GNU Mailman has been accepted in Summer of Code!
by Stephen J. Turnbull 16 Mar '21

16 Mar '21

Just to let everyone know. [Cc'd to Mailman 3 Users, but please direct followups to the Mailman Developers list only!] GSoC "who we are" page is here: https://summerofcode.withgoogle.com/organizations/4903353420611584/ Ideas page is here: https://wiki.list.org/DEV/Google%20Summer%20of%20Code%202021 Student applications open on March 30, and continue until April 13 18:00 UTC. Comments, ideas, etc welcome on Mailman Developers (preferred) or directly to me or Abhilash. Please do NOT edit the ideas page on the wiki without discussing with me, Abhilash, or Mark, as Google has strict rules about what ideas are relevant to their program. If you have been active in GSoC and do understand the rules, the discussion will be "pro forma", but at least we do want to know what we might be asked about as potential mentors. We can add more mentors, definitely, you're welcome. If you can reliably spend about 5 hours per week on it for the summer, we'll sign you up as a regular mentor. If you'd like to interact regularly with students, but can't promise 5 hours a week, we can negotiate a semi-formal status (but you won't get the privileges of a full mentor, like the T-shirt). Otherwise, we'll try to keep discussions on the list, everybody welcome. Regards, Steve

1 0

Re: statistics monitoring for Mailman3
by Mark Sapiro 15 Mar '21

15 Mar '21

On 3/12/21 11:22 AM, Mohsen Masoudfar wrote: > I was checking on log rotating on smtp.log. On my server it does not rotate. I could use log-rotator to rotate that, but could not find any information how to inform the mailman process of the rotation, e.g. which signal to send him? The `mailman reopen` command is the recommended way, or you can send the `master` a SIGUSR1. The master's PID is in the file var/master.pid or /var/run/mailman/master.pid if you've configured `layout: fhs`. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 5

statistics monitoring for Mailman3
by Mohsen Masoudfar 15 Mar '21

15 Mar '21

Hi, I am wondering if there is a monitoring application available for Mailman3 to display statistics about the number of emails send for each maillist. Thanks Mohsen

4 6

Five Year Old Issue
by Brian Carpenter 15 Mar '21

15 Mar '21

Any chance to get this implemented in time for the next Mailman 3 core release? https://gitlab.com/mailman/mailman/-/issues/19 It's been 5 years. -- Brian Carpenter Harmonylists.com Emwd.com

2 7

How To Install Mailman 3 on Debian 10 (Complete Guide)
by Brian Carpenter 14 Mar '21

14 Mar '21

I have finished my how-to install Mailman 3 on Debian 10 completed to the point where you can use it to get a fully functional Mailman 3 environment up and running. This is a comprehensive guide that walks you through installing EVERYTHING (currently!) that Mailman 3 needs to run. It also makes updating Mailman 3/Postorius/Hyperkitty very easy. I have not added the update directions yet but will very soon. I also plan on adding a section on setting up DKIM and Xapian with Mailman 3. I hope this helps those who wish to get a Mailman 3 server up and running quickly and brings a sense of sanity to the confusion regarding the various documentation out there concerning the installation of Mailman 3/Postorius/Hyperkitty. I intend to add a How-to for Ubuntu 20 at some point. Without further ado: https://wiki.list.org/DOC/Howto_Install_Mailman3_On_Debian10 I am sure the above guide can use improvements. Feel free to contact me off-list to point out mistakes/improvements, etc. -- Brian Carpenter Harmonylists.com Emwd.com

12 36

hooking up mailman and sendmail
by John Covici 14 Mar '21

14 Mar '21

Hi. So, I have sendmail as my mta and I want mailman to use it. So far, I have a local delivery agent able to send on port 8024. So, what do I have to tell mailman to use sendmail and listen on port 8024 and to send on port 25? Thanks in advance for any suggestions. -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una covici(a)ccs.covici.com

3 6