April 2020 - Mailman-users - lists.mailman3.org

Importing mbox files into archive defect with lines with From
by andrew.bernard＠gmail.com Sept. 19, 2023

Sept. 19, 2023

A curious problem, but seems to be well defined. I am importing mbox format files with 25 years worth of archives in 250 files from a Listserv list into hyperkitty. All is going swimmingly, except I get lots of partial emails with sender of None put into the current month, with text that has clearly been truncated. As I look at each one, I see that the line in the imported text is immediately after a line starting with 'From'. Clearly, 'From:' is an RCS-82 header, but 'From ' is not, and yet there is much evidence here that this is messing up the import. Is this a known bug? If not, how do I report it?

8 15

Apache Conf
by Guiseppin Thomas July 26, 2022

July 26, 2022

Hi, Currently, I use a nginx configuration for mailman. It's work perfectly. I tried to do the same with Apache, but the statics files are not delivered (404). Basically, it's the same configuration: /server { listen 80; server_name mailing.ddd.fr; access_log /var/log/nginx/mailing.access.log; error_log /var/log/nginx/mailing.error.log; location /static/ { alias /opt/mailman/static/; expires 30d; } proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; location / { proxy_pass http://localhost:8000; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; } } <VirtualHost *:80> ServerName mailing.ddd.fr ErrorLog ${APACHE_LOG_DIR}/mailing.error.log CustomLog ${APACHE_LOG_DIR}/mailing.access.log combined <Location /static/> Alias "/opt/mailman/static/" </Location> <Location /> ProxyPass http://localhost:8000/ ProxyPassReverse http://localhost:8000/ ProxyPreserveHost On </Location> </VirtualHost>/ I missed something ? Thanks.

5 10

Adding user - Error 409 Subscription request already pending
by kevin＠coastalaska.org July 14, 2022

July 14, 2022

We have a couple of people trying to subscribe to our list but receive an error similar to: {"title": "409 Conflict", "description": "Subscription request already pending"} If I try to Mass Subscribe them in Postorius I get this error: HTTP Error 409: b'{"title": "409 Conflict", "description": "Subscription request already pending"}' In Postorius I don't see them hung up in Subscription requests. What to do? Thanks, Kevin

5 17

Walk-thru for Ubuntu Bionic Mailman 3 Full setup
by kelly.close＠lrewater.com July 9, 2022

July 9, 2022

I hope this is helpful to the Ubuntu folks out there. Once some critical small things were figured out, turns out it's pretty easy to get Mailman 3 running successfully under Ubuntu 18.04. The linked google doc includes my own walkthru, which includes using a cloud server image for Ubuntu 18.04 and a LAMP setup with Apache 2 and PHP, as well as Python and PostgreSQL, and the mailman3-full package that comes with that Ubuntu distribution. The walk-thru uses Postfix for mail and PostgreSQL for the back end database. https://docs.google.com/document/d/1xIcSsoNFp2nHi7r4eQys00s9a0k2sHhu1V5Plan… If you use this and see needed corrections or additions, please let me know! ~Kelly

6 21

Manage Member(s) Mailman Settings / Display Names
by Jim Ward May 18, 2022

May 18, 2022

Mailman2 allowed me to list my members and modify a number of their attributes (display_name, etc) Postorius is a beautiful interface BUT I am evidently not finding how to manage my members to the extent that I could in Mailman2 Am I missing something?

4 7

ARC
by David Krantz March 20, 2022

March 20, 2022

Hi all, Is the documentation correct that ARC should be as simple to configure in mailman 3 as to add the private DKIM key and restarting mailman? (https://mailman.readthedocs.io/en/latest/src/mailman/handlers/docs/arc_sign…) I've tried that without finding any effect in my so far limited tests. I have not found anything in logs although I might have missed looking in one. Are there any known limitations? I have previously a working DKIM signature on outgoing mail as well as correctly set up SPF in DNS and SPF-checking on received mail. The verification on incoming mail adds a few headers but I do not think that that should be an issue, neither would the DKIM signing change anything should mailman add new headers. I now run Mailman 3.2.3 (La Villa Strangiato) on Python 3.7.4. Cheers // David

6 11

Postorius & multi domain
by Gelpi Andrea Jan. 6, 2022

Jan. 6, 2022

Hi, on a fresh debian 10 (mail server) I added mailman3 with: apt-get install mailman3-full dpkg-reconfigure mailman3 dpkg-reconfigure mailman3-web The server name is webserver-A Then I log in in webserver-A/mailman3 as a superuser I created a domain for webserver-A and domain-A The I created a list-A Then I created a second domain for webserver-B and domain-B Then I added to apache config a virtual host for webserver-B I log in webserver-B as the some superuser of webserver-A and I created a list-B But when I list the lists I can see both under webserver-A and webserver-B. The some problem with archiving hyperkitty. I search internet for a while and I discovered that using FILTER_VHOST = True seems to solve the problem. >From posotrius config page: FILTER_VHOST Filter the list of available lists in Postorius and Hyperkitty depending on the domain they are being currently served from. Mailman 3 supports multiple domains in a single installation. But it doesn't work. I got err 500 form apache. Were can I find an explanation or a how to configure the system to have 2 webserver with different domains working on the some server as it was with mailman 2? P.S.: I upgrade postorius to V. 1.3.2 and djando V 2.2.12 using the packages in testing distribution. The debian 10 official postorius package is too old (1.2.24) and does not support FILTER_VHOST Thanks in advance - -- Gelpi ing. Andrea ************************************************** I documenti vitali dimostreranno la loro vitalitˆ spostandosi spontaneamente da dove li avevate lasciati a dove non riuscirete a trovarli. **************************************************

4 13

Negative number for digest size
by Gila Halpern Nov. 19, 2021

Nov. 19, 2021

If I set the digest size threshold to -1, will that make the digest size unlimited, and it will send once per period specified in the digest frequency setting?

3 4

[MM3-users]Is it possible to grant all users the ability to Create List
by Carrie Knox July 13, 2021

July 13, 2021

Hello, Our company is evaluating mailman3 as an option for company internal list serving. One of the requirements is that anyone with access to the list server be allowed to create and manage lists. Is this possible? If so, how? Is there a "create list" role that can be added for all registered users? Thanks

5 5

List rename
by Joel Lord July 7, 2021

July 7, 2021

I'm in an odd situation where I need to rename a bunch of lists. They were all created on mailman2 originally and migrated to mailman3 (very successfully, TYVM) but the names were all originally discuss-<foo>@domain and it's very confusing to be sure you're always sending to the correct <foo>. We want to completely rename the lists to <foo>-discuss@domain. These lists do not keep archives, so if I have to resort to extracting the subscriber lists and the configs and building new lists, I'm completely fine with that. Problem is, I'm really used to MM2 and config_list and could do this without thinking using those tools... that I don't have. Running MM3 3.2.2 trying to make this happen. Any assistance I could get will be greatly appreciated. THANKS! -- Joel Lord Web Administrator, Alpha Psi Omega Grand Cast etc... etc... etc...

5 6