March 2020 - Mailman-users - lists.mailman3.org

Protocol version
by David Krantz 05 Apr '20

05 Apr '20

Hi. I have the following displayed when I look at the "System Information" in Postorius: Mailman Core Version GNU Mailman 3.3.0 (La Villa Strangiato) Mailman Core API Version 3.0 Mailman Core Python Version 3.7.6 (default, Dec 19 2019, 23:49:42) [GCC 5.4.0 20160609] What surprises me is the protocol version. I have tried to set the protocol version to 3.1 in mailman core (which should be the latest according to the documentation) and restarting both core and web but that gives no effect. Normally I have not had any protocol version defined. Everything seems to work just fine but something is strange, either the documentation, my setup or mailman/postorius. // David

1 1

Postorius confirmation mails shown in uwsgi-error.log but not sent
by Ralph Seichter 04 Apr '20

04 Apr '20

I have struggled for hours but cannot seem to figure it out. After registering new user accounts in Postorius, the "confirm your address" emails don't get sent via SMTP (my MTA does not even log connection attempts), but their content is displayed in uwsgi-error.log. I think I disabled developer mode in Core and Postorius: $ mailman conf | grep devmode [devmode] enabled: no [devmode] recipient: [devmode] testing: no [devmode] wait: 60s $ grep ^DEBUG settings.py DEBUG = False Users can subscribe via list-join(a)domain.tld, including confirmations. Account registration using the WebUI works as well, it's just the emails that don't get sent. What am I missing, I wonder? -Ralph

3 10

Finding a mailman3 installation description that works
by ralf.wiegand＠tena-sda.org 01 Apr '20

01 Apr '20

WE are currently using mailman2. I have the task to setup and install a maiman3 server. Postfix is installed and working. Can anybody point me to a link where the actual installation is described using RHEL 7 or RHEL 8. This will be a hardened DISA compliant server, so I am trying to avoid installing compilers and tools that are not part of the standard RHEL 7 repos. Thank You, Best regards, Ralf Wiegand

3 4

Mailman3 moving to new server, not able to establish SMTP connection
by Andrew Hodgson 28 Mar '20

28 Mar '20

Hi, Whilst we are all stuck in doors I have started a project to move Mailman3 from a Docker installation to a new server using a Python venv. Old server was Debian Jessie and the new one is Buster. Using Exim with stock config. Everything seems to be going ok but mail isn't delivering (cannot connect to SMTP server). I have /opt/mailman which I did chown -R list:list mailman.cfg has following MTA settings: [mta] incoming: mailman.mta.exim4.LMTP configuration: python:mailman.config.exim4 I wrote a Systemd unit which starts Mailman from the venv and started up Mailman once I got Postgres sorted so it would create the necessary files in the var directory structure. One thing I noticed and had to fix is that it doesn't creat the directories for existing lists, and the Exim config examples out there check for the existance of those directories to identify whether the address exists. I created those anyway and set ownership perms as before. Once I fixed that I sent a test message to the owner address and that routed correctly and the headers indicated the message was sent back to localhost by Mailman. However I can't get it to route a list message, here is a log showing the start of the Mailman master processes and me sending a test message from Outlook (so incoming mail is routing ok): Mar 28 16:03:20 2020 (21877) Master started Mar 28 16:03:32 2020 (21889) lmtp runner started. Mar 28 16:03:32 2020 (21896) virgin runner started. Mar 28 16:03:32 2020 (21887) command runner started. Mar 28 16:03:32 2020 (21890) nntp runner started. Mar 28 16:03:32 2020 (21886) bounces runner started. Mar 28 16:03:33 2020 (21892) pipeline runner started. Mar 28 16:03:33 2020 (21888) in runner started. Mar 28 16:03:33 2020 (21895) retry runner started. Mar 28 16:03:34 2020 (21894) rest runner started. [2020-03-28 16:03:34 +0000] [21894] [INFO] Starting gunicorn 20.0.4 [2020-03-28 16:03:34 +0000] [21894] [INFO] Listening at: http://127.0.0.1:8001 (21894) [2020-03-28 16:03:34 +0000] [21894] [INFO] Using worker: sync [2020-03-28 16:03:34 +0000] [21963] [INFO] Booting worker with pid: 21963 Mar 28 16:03:34 2020 (21885) archive runner started. [2020-03-28 16:03:34 +0000] [21965] [INFO] Booting worker with pid: 21965 Mar 28 16:03:34 2020 (21897) digest runner started. Mar 28 16:03:36 2020 (21891) out runner started. Mar 28 16:04:25 2020 (21888) ACCEPT: <AM0PR08MB39085771D0E2D9114FDE8E83AFCD0(a)AM0PR08MB3908.eurprd08.prod.outlook.com> Mar 28 16:04:26 2020 (21885) HyperKitty archived message <AM0PR08MB39085771D0E2D9114FDE8E83AFCD0(a)AM0PR08MB3908.eurprd08.prod.outlook.com> to https://lists.hodgsonfamily.org/hyperkitty/list/blind-sysadmins@lists.hodgs… [28/Mar/2020:16:04:26 +0000] "GET /3.0/lists/blind-sysadmins(a)lists.hodgsonfamily.org HTTP/1.1" 200 445 "-" "GNU Mailman REST client v3.3.0" Mar 28 16:04:27 2020 (21891) Cannot connect to SMTP server localhost on port 25 [28/Mar/2020:16:04:27 +0000] "GET /3.0/lists/blind-sysadmins(a)lists.hodgsonfamily.org/config HTTP/1.1" 200 2595 "-" "GNU Mailman REST client v3.3.0" [28/Mar/2020:16:04:27 +0000] "GET /3.0/users/andrew(a)hodgson.io HTTP/1.1" 200 439 "-" "GNU Mailman REST client v3.3.0" Now in the out queue I have this: root@elrond:/opt/mailman# ls -la /opt/mailman/var/queue/out total 32 drwxrwx--- 2 list list 4096 Mar 28 16:34 . drwxr-xr-x 14 list list 4096 Mar 28 13:25 .. -rw-rw---- 1 list list 11152 Mar 28 16:34 1585413255.2412584+390ab148e589108ed9e849445e5e90410f69def3.bak -rw-rw---- 1 list list 11152 Mar 28 16:34 1585413255.4891446+75bde47331619263b05f582c28ceb85a13bb5265.pck.tmp There is no connection attempt in the Exim log from Mailman and I can connect to localhost:25. This is a dualstack machine and I was wondering whether we had any IPV6 issues (I had an issue with Gunicorn and Nginx routing traffic due to this earlier that I had to sort), but as owner addresses are working I don't know what is different on that. Any suggestions? Thanks. Andrew.

1 1

421 - Too many sessions from source IP
by hansen＠rc.org 27 Mar '20

27 Mar '20

My new MM3 server is receiving these errors from cox.net: "(delivery temporarily suspended: host cxr.mx.a.cloudfilter.net[34.212.80.54] refused to talk to me: 421 cxr-ibgw-6004a.stratus.cloudmark.com cmsmtp too many sessions from 213.125.4.246. Refer to Error Codes section at https://www.cox.com/residential/support/email-error-codes.html for more information. AUP#CXCNCT) " The link gives just this: 421 - [too many sessions from <source IP>] The sending IP address has exceeded the five maximum concurrent connection limit. Configure your sending server to establish no more than five concurrent connections. 1. Is that a legitimate excuse to refuse passing on emails or is cox.net too stingy? 2. Is that a setting we need to change in Mailman somewhere? Or should this be handled in some Postfix setting? Yours, Allan

4 3

Archives with encoding characters
by Seth Seeger 25 Mar '20

25 Mar '20

Hello everyone, I have a few (but not all) members complaining that their digests are full of coded characters. Two examples below were forwarded to me: > What I ended up doing was creating 2 "practice lines" in the centre of=20 > our big teaching circle (I always teach new figures in a big circle) -=20 > which each had 3 people set up in a line with generous space between,=20 > and first=C2=A0 I walked through one of those lines myself starting first= > =20 and > Robins pass Right=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 Larks Loop L= > eft What is the cause? Is there anything I can do about it? Thanks, Seth

3 7

Things I miss about mailman2
by Quanah Gibson-Mount 24 Mar '20

24 Mar '20

Now that we are on mailman3, I'm finding things that were really useful in mailman2 are completely missing in mailman3, which seems odd, since they in particular affect the ability of list moderators to do their job well. a) When a post was made to a moderated list in mailman2, I would get an email that included a LINK to the held email. Now I just get a canned email saying I need to go to the dashboard, blah blah. Why was this link removed? It was extremely useful and now I have to jump through extra hoops. b) When a post is made to a moderated list in mailman2, when I went to the page to approve/deny/discard, there was additionally an option to remove the moderated flag from the user for all future emails. This option no longer exists. This was EXTREMELY useful, as we force all new members of the list to be moderated for a time while we evaluate the quality of their postings. Now I have to go manually track down the user and their settings. Unnecessary extra hoops to jump through c) When a post is made to a moderated list, one of the options when selecting REJECT was it allowed me to set a custom message when rejecting the email. This was extremely useful. For example today, someone emailed our bug tracking list directly instead of filing a bug. In the past, I would have added a note to them about what they should do (in this case, I would have told them to send their email to our community technical discussion list). Now I can no longer do that, I can only reject it or discard it. Why was this removed? --Quanah -- Quanah Gibson-Mount Product Architect Symas Corporation Packaged, certified, and supported LDAP solutions powered by OpenLDAP: <http://www.symas.com>

6 9

Xapian alternatives
by Andrew Bernard 24 Mar '20

24 Mar '20

Are there alternative search engines to Xapian that can be used for Mailman 3? I have come to understand that Xapian development stalled in the v2.0 attempt.

4 6

Thread matching query does not exist
by andrew.bernard＠gmail.com 19 Mar '20

19 Mar '20

Now I am seeing this in the log every few seconds: 12:12:29 [Q] INFO Process-1:4 processing [rebuild_thread_cache_votes] 12:12:29 [Q] ERROR Failed [rebuild_thread_cache_votes] - Thread matching query does not exist. : Traceback (most recent call last): File "/opt/mailman/mm/venv/lib/python3.7/site-packages/django_q-1.0.1-py3.7.egg/django_q/cluster.py", line 377, in worker res = f(*task['args'], **task['kwargs']) File "/opt/mailman/mm/venv/lib/python3.7/site-packages/HyperKitty-1.2.3-py3.7.egg/hyperkitty/tasks.py", line 189, in _rebuild_thread_cache_votes thread = Thread.objects.get(id=thread_id) File "/opt/mailman/mm/venv/lib/python3.7/site-packages/Django-2.1.9-py3.7.egg/django/db/models/manager.py", line 82, in manager_method return getattr(self.get_queryset(), name)(*args, **kwargs) File "/opt/mailman/mm/venv/lib/python3.7/site-packages/Django-2.1.9-py3.7.egg/django/db/models/query.py", line 399, in get self.model._meta.object_name hyperkitty.models.thread.Thread.DoesNotExist: Thread matching query does not exist. Any help? How do I identify the thread in question? I imported an archive from a Listserv list, processed into something resembling mbox format (which I now understand not to be a standard at all) and have about 100,000 messages there. I am having a lot of trouble with these sort of errors, as you will see from my flurry of posts recently. Yes, I am running all the jobs. Andrew

3 3

IsADirectoryError: [Errno 21] Is a directory: '/usr/local/lib/python3.7/site-packages/mailman/templates'
by sunil soprey 19 Mar '20

19 Mar '20

Has anyone encountered this error? I pulled the latest mailman suite (versions below), and facing this error in two places * mass subscription add of users -> Click on mass-subscription for list, enter email Django 2.2.11 django-allauth 0.41.0 django-appconf 1.0.3 django-ca 1.15.0 django-compressor 2.4 django-extensions 2.2.8 django-gravatar2 1.4.4 django-gunicorn 0.1.1 django-haystack 2.8.1 django-health-check 3.12.1 django-mailman3 1.3.2 django-object-actions 2.0.0 django-picklefield 2.1.1 django-prometheus 2.0.0 django-q 1.2.1 django-redis 4.11.0 django-redis-cache 2.1.0 django-rest-auth 0.9.5 django-saml2-auth 2.2.1 djangorestframework 3.11.0 djangorestframework-jwt 1.11.0 python3 -V Python 3.7.6 django-mailman3 1.3.2 HyperKitty 1.3.2 mailman 3.3.0 mailman-hyperkitty 1.1.0 mailmanclient 3.3.0 postorius 1.3.2 sADirectoryError: [Errno 21] Is a directory: '/usr/local/lib/python3.7/site-packages/mailman/templates' [2020-03-17 03:56:54 +0000] [4220] [ERROR] Socket error processing request. Traceback (most recent call last): File "/usr/local/lib/python3.7/site-packages/gunicorn/workers/sync.py", line 134, in handle self.handle_request(listener, req, client, addr) File "/usr/local/lib/python3.7/site-packages/gunicorn/workers/sync.py", line 190, in andle_request util.reraise(*sys.exc_info()) File "/usr/local/lib/python3.7/site-packages/gunicorn/util.py", line 625, in reraise raise value File "/usr/local/lib/python3.7/site-packages/gunicorn/workers/sync.py", line 175, in andle_request respiter = self.wsgi(environ, resp.start_response) File "/usr/local/lib/python3.7/site-packages/mailman/database/transaction.py", line 50, in wrapper rtn = function(*args, **kws) File "/usr/local/lib/python3.7/site-packages/mailman/rest/wsgiapp.py", line 193, in __call__ return super().__call__(environ, start_response) File "falcon/api.py", line 274, in falcon.api.API.__call__ File "falcon/api.py", line 269, in falcon.api.API.__call__ File "/usr/local/lib/python3.7/site-packages/mailman/rest/members.py", line 266, in on_post pre_approved=pre_approved) File "/usr/local/lib/python3.7/site-packages/mailman/app/subscriptions.py", line 523, in register list(workflow) File "/usr/local/lib/python3.7/site-packages/mailman/app/workflow.py", line 69, in __next__ return step()

2 3