December 2018 - Mailman-users - lists.mailman3.org

Mailman3 stopped sending out mail
by Abhijith PA 31 Dec '18

31 Dec '18

Hello. Recently my mailman3 instance stopped distributing mail. But mailman's own mail (notification, digest etc) and archiving are working OK. I couldn't figure what is going wrong From mail.log --- Dec 31 10:03:20 lists postfix/smtpd[10900]: Anonymous TLS connection established from mail.xxxx.xx[5.79.72.163]: TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits) Dec 31 10:03:20 lists postfix/smtpd[10900]: Anonymous TLS connection established from mail.xxxx.xx[5.79.72.163]: TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits) Dec 31 10:03:20 lists policyd-spf[10907]: prepend Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=5.79.72.163; helo=mail.xxxx.xx; envelope-from=abhijith(a)xxxx.xx; receiver=<UNKNOWN> Dec 31 10:03:20 lists policyd-spf[10907]: prepend Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=5.79.72.163; helo=mail.xxxx.xx; envelope-from=abhijith(a)xxxx.xx; receiver=<UNKNOWN> Dec 31 10:03:21 lists postfix/smtpd[10900]: 04C2412038F: client=mail.xxxx.xx[5.79.72.163] Dec 31 10:03:21 lists postfix/smtpd[10900]: 04C2412038F: client=mail.xxxx.xx[5.79.72.163] Dec 31 10:03:21 lists postfix/cleanup[10912]: 04C2412038F: message-id=<f875c144-a23c-baa2-7de2-1b102d3e7494(a)xxxx.xx> Dec 31 10:03:21 lists postfix/cleanup[10912]: 04C2412038F: message-id=<f875c144-a23c-baa2-7de2-1b102d3e7494(a)xxxx.xx> Dec 31 10:03:21 lists opendkim[450]: 04C2412038F: s=_teknikKey d=xxxx.xx SSL Dec 31 10:03:21 lists opendkim[450]: 04C2412038F: s=_teknikKey d=xxxx.xx SSL Dec 31 10:03:21 lists postfix/smtpd[10900]: disconnect from mail.xxxx.xx[5.79.72.163] ehlo=2 starttls=1 mail=1 rcpt=1 data=1 quit=1 commands=7 Dec 31 10:03:21 lists postfix/smtpd[10900]: disconnect from mail.xxxx.xx[5.79.72.163] ehlo=2 starttls=1 mail=1 rcpt=1 data=1 quit=1 commands=7 Dec 31 10:03:21 lists postfix/qmgr[13211]: 04C2412038F: from=<abhijith(a)xxxx.xx>, size=1699, nrcpt=1 (queue active) Dec 31 10:03:21 lists postfix/qmgr[13211]: 04C2412038F: from=<abhijith(a)xxxx.xx>, size=1699, nrcpt=1 (queue active) Dec 31 10:03:21 lists postfix/lmtp[10915]: 04C2412038F: to=<test3(a)lists.yyyy.yy>, relay=127.0.0.1[127.0.0.1]:8024, delay=0.87, delays=0.62/0.02/0.04/0.2, dsn=2.0.0, status=sent (250 Ok) Dec 31 10:03:21 lists postfix/lmtp[10915]: 04C2412038F: to=<test3(a)lists.yyyy.yy>, relay=127.0.0.1[127.0.0.1]:8024, delay=0.87, delays=0.62/0.02/0.04/0.2, dsn=2.0.0, status=sent (250 Ok) Dec 31 10:03:21 lists postfix/qmgr[13211]: 04C2412038F: removed Dec 31 10:03:21 lists postfix/qmgr[13211]: 04C2412038F: removed I am not sure why 'postfix/qmgr[13211]: 04C2412038F: removed' is happening. from /var/log/mailman3/smtp.log: Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) handling connection Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) Data: b'LHLO lists.xxxx.xx' Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) Data: b'MAIL FROM:<abhijith(a)xxxx.xx>' Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) sender: abhijith(a)xxxx.xx Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) Data: b'RCPT TO:<test3(a)xxxx.xx>' Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) recip: test3(a)xxxx.xx Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) Data: b'DATA' Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) Data: b'QUIT' Dec 31 10:03:21 2018 (6323) ('127.0.0.1', 48720) connection lost Dec 31 10:03:21 2018 (6323) Connection lost during _handle_client() Here again I am doubtful about 'Connection lost during _handle_client()'. Please help. Abhijith PA

2 1

Customizing Look and Feel?
by Joel Lord 31 Dec '18

31 Dec '18

Is it possible to customize the look at feel of the web interface at all? I have some lists that really require that subscription requests include full name, to make the workload on the moderators, well, workable in keeping a closed list tight. I've found where the "Your name (optional)" text is in list_forms.py, but modifying that strikes me as a poor plan. Changing that text would be lovely. Actually making that field required would be seriously awesome. Is this possible in the current code base (3.2.0) without doing ill-advised things modifying source code? Thanks! -- Joel Lord Web Administrator, Alpha Psi Omega Grand Cast etc... etc... etc...

2 1

Converting non-members to members
by Alan So 27 Dec '18

27 Dec '18

Postorius is not currently exposing non-members management. Our Mailman 2 users are currently using accept_these_nonmembers, hold_these_nonmembers and reject_these_nonmembers. We know that mailman import21 will change these to nonmembers entries in Mailman 3. Since list owners will still want to manage them, we tend to move all of them to members and turn off delivery status for them. However, we met some difficulties when we try to develop using mailman client. 1) If those non-members addresses already exist as members, we will encounter error when we subscribe for them: urllib.error.HTTPError: HTTP Error 409: b'Member already subscribed' 2) We cannot change the moderation_action: urllib.error.HTTPError: HTTP Error 400: b'Cannot convert parameters: moderation_action' 3) We cannot change the preference: urllib.error.HTTPError: HTTP Error 400: b'Cannot convert parameters: delivery_status' Are there any better ways to enable the list owners to manage those previously configured nonmembers' addresses through the web? Otherwise, we probably need to have some manual effort to overcome the above three issues. We know that we can always do the above manually but we got a lot of lists to migrate to Mailman 3.

2 3

Verification Failed Error
by brian＠emwd.com 23 Dec '18

23 Dec '18

I am trying to get the reset password function to work but I am getting this error message: smtplib.SMTPRecipientsRefused: {'email(a)address.com': (550, b'Verification failed for <postorius(a)mailman3.hostname.com>\nUnknown user\nSender verify failed')} Brian

4 31

Docker Installation of Mailman -- The Hyperkitty Chronicles
by brian＠emwd.com 23 Dec '18

23 Dec '18

Using Maxking's docker project to install mailman3, I have a fairly functional mailman3 installation. However Hyperkitty is not archiving or showing list participants like: https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/ This is my page: https://mailman3.emwd.com/hyperkitty/list/testlist@mailman3.emwd.com/ The docker documents really don't say much about getting HK up and running. Brian

3 9

Mailman3 and Exim setup
by brian＠emwd.com 21 Dec '18

21 Dec '18

I am installing Mailman3 via the Docker image provided by maxking. In his instructions he says: "To use Exim4, it should be setup to relay emails from 172.19.199.3 and 172.19.199.2." I am not sure where in the exim.conf file this is done. I took a guess at: hostlist relay_from_hosts = localhost : 172.19.199.3 : 172.19.199.2 Was my guess wrong?

4 4

ONLY moderator senders messages
by erlonmz＠hotmail.com 21 Dec '18

21 Dec '18

how to configure the mailman 3 for only moderators to send messages?

1 0

Mailman3 via Docker and NGINX
by brian＠emwd.com 19 Dec '18

19 Dec '18

I have Mailman3 installed on CentOS 7 using maxking's docker image. I believe the installation went fine and running "curl http://172.19.199.3:8000/postorius/lists/" produces the correct output. I also will be using exim and nginx with this installation. It seems I am stuck with the nginx setup. I created a sitename.com.conf file in the /etc/nginx/conf.d folder. I have the following inputted there: server { listen 80; server_name `sitename.com`; location /static/ { alias /opt/mailman/web/static/; } location / { include uwsgi_params; uwsgi_pass 172.19.199.3:8000; uwsgi_read_timeout 300; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $remote_addr; } } However when I go to http://sitename.com (obviously using an alias here for privacy reasons) I get the default nginx index page. Do I need to add anything to the main nginx.conf file to be able to see my mailman3 installation? Thank you for any assistance, Brian Carpenter

4 9

Templates
by David Krantz 19 Dec '18

19 Dec '18

Hi. How do I set a template for one specific list? I want one list to have a special footer template. I have tried updating the database (template table) without effect so apparently the database is not used for templates or some kind of fallback is used to set it to the generic footer. Of course I also tried to restart mailman after that operation to try to rule out any caching-related problem. I want to use a file://-path as that is the least painful way of doing it. I also would like a solution to place a file in a special location. My current templates are in a .../var/templates/site/en/ structure with names like list:member:generic:footer.txt Cheers // David

4 14

Newbie Wants To Know About Multiple Lists
by Christopher Garwood 19 Dec '18

19 Dec '18

Howdy, I am new to Mailman and there are so many things I would like to know. Before I try to find out how to install and configure the software, I need to know if, how and what is required for us to set up this software to deal with more than one email list. I am working with a plan to setup a CentOS VPS on which Mailman will be hosted. The objective is to host and administrate mailing list for the 3 entities that I am directly involved with. These lists must function completely unrelated to each other including the email addresses from which the emails & news letters are sent from. If this is possible can I be given information or a link to how it can be done and what is required?

2 2