September 2017 - Mailman-users - lists.mailman3.org

Log for outgoing e-mails
by Henrik Rasmussen Sept. 20, 2017

Sept. 20, 2017

Docker mailman 0.1.1 Where is outgoing e-mails logged? Where can I see who it was sent to? On my test list I subscribed a new member (say recipient(a)hotmail.com) using Mass operation subscription. From another e-mail, not subscribed to the list (say sender(a)example.ku.dk) I sent a mail to the list which was held as expected. The message was logged in /opt/mailman/core/var/logs/smtp.log. When I released the mail, the newcoming member recipient(a)hotmail.com received the mail as expected, but I don’t see any log messages that the mail was sent other than: Sep 20 11:50:52 2017 (34) <6DCC3E5DA06FE346B4DE4876C4F2713D019BB70E39(a)foo.bar> smtp to testlist(a)mailman3.ku.dk for 1 recips, completed in 0.052258968353271484 seconds Sep 20 11:50:52 2017 (34) <6DCC3E5DA06FE346B4DE4876C4F2713D019BB70E39(a)foo.bar> post to testlist(a)mailman3.ku.dk from sender(a)example.ku.dk, 13041 bytes -- Henrik Rasmussen <her(a)adm.ku.dk> University of Copenhagen, Danmark

2 1

restrict sending to owner/moderator
by m.dohmen＠xconnect.de Sept. 20, 2017

Sept. 20, 2017

Hello, I'd like to restrict message acceptance on a per-list basis to the owner or moderator, so that simple subscribers cannot send messages to the list. But I don't want the owner/moderator having to moderate own messages, so the member setting "hold for moderation" in Postorius isn't applicable. Is there a way to do this?

3 2

Deleting archives
by Henrik Rasmussen Sept. 14, 2017

Sept. 14, 2017

Docker-mailman 0.1: I have deleted some lists that I used for testing, but Hyperkitty seems to preserve the archives in the Available lists. Clicking on a list archive gets me to the archive of that list (with no posts because I haven't posted anything to the list). The URL is https://[WEBSITE]/hyperkitty/list/[LISTNAME](a)[LISTDOMAIN]/<https://[WEBSITE]/hyperkitty/list/%5bLISTNAME%5d(a)%5bLISTDOMAIN%5d/> (with a (a)), but when I click Manage subscription, the URI changes to https://[WEBSITE]/postorius/lists/[LISTNAME].[LIST<https://[WEBSITE]/postorius/lists/%5bLISTNAME%5d.%5bLIST>DOMAIN/ (with a dot instead of (a) which seems normal behavior) and I get a "Not Found The requested URL /postorius/lists/[LISTNAME]DOT[LISTDOMAIN]/ was not found on this server. " error. Of course I can't manage the subscription for a list I have deleted, but shouldn't the archive for a list be deleted along deleting the list. Henrik Rasmussen

1 1

Installing mm3 with docker
by Tom Browder Sept. 10, 2017

Sept. 10, 2017

I am trying to follow instructions but when I get to the actual docker pull command (with trust enabled): # docker pull maxking/mailman-core:release I get an error message: No trust data for release I have tried adding various tags but no changes. What am I doing wrong? Thanks. -Tom

2 4

Mailman 3 bounce handling and DKIM mitigation
by David Krantz Sept. 5, 2017

Sept. 5, 2017

Hi, I have a question on bounce handling. I get the impression that bounces are just lost and neither handled nor forwarded to the list admin. Is this a known problem? I am running mailman from git, but about version 3.1 and use postfix. I find lots of things in the bounceevents table. Is there any way to find out more on these events? I probably can configure postfix to send listname-bounce@domain to an admin adress. Or for that matter hack mailman to send it to the correct admin. Also the DKIM mitigation does not seem to detect DKIM domains. If I force the mitigation for all mails it works but that of course has annoying consequences although mostly cosmetic. This has caused quite a number of bounces for my lists (as well as being temporarily banned by at least Microsoft). I'm thinking of upgrading to a later version. What is the latest version that might be a good idea to install today? I install from gitlab. cheers // David

2 1

Social Auth, howto?
by Claus-Justus Heine Sept. 2, 2017

Sept. 2, 2017

Hi, sorry, this seems to be a Django stuff, but how do I enable this social auth stuff? I get the following Fedora: gives me a login screen (ok) Yahoo: gives me a login screen and lots of commercials (ok) OpenId: gives me a possibility to sign up or in (ok) Github: internal server error 500, Django log: DoesNotExist: SocialApp matching query does not exist. Same with GitLab and Google. Ok, seemingly I need to do something to make it work, has anyone a link to some snippet of documentation of example setup? Thanks Claus -- Claus-Justus Heine himself(a)claus-justus-heine.de http://www.claus-justus-heine.de/ Schatzmeister der Camerata Academica Freiburg e.V. --- www.cafev.de

2 1

Moderation requests, dash-board link in notification?
by Claus-Justus Heine Sept. 2, 2017

Sept. 2, 2017

Hi there, I suppose this is rather a simple configuration issue. However, with Mailman v2 the moderator or list-owner was supplied with a link to the admin-site in the moderation-reminder. I suppose that this can also be very easily configured with v3? Of course, I know where my amdin-site is, but I am planning to deploy mm3 in a setting with educated dummy users which probably would rather first ask and only try to find out by themselves if they cannot find someone to ask. Cheers Claus -- Claus-Justus Heine himself(a)claus-justus-heine.de http://www.claus-justus-heine.de/ Schatzmeister der Camerata Academica Freiburg e.V. --- www.cafev.de

2 1

Funny responds to subscriptions emails
by Claus-Justus Heine Sept. 2, 2017

Sept. 2, 2017

Playing around with mailman3 I get funny responds from the list-manager to subscription requests. I have set up a "playground" list (guess why) and trying to subscribe via email. Basically, things work. However, the end-user (me) gets confusing responses. I would not care for myself, but ... What I did: send an Email > To: playground <playground-subscribe(a)lists.claus-justus-heine.de> > From: Claus-Justus Heine <Claus-Justus.Heine(a)IANS.Uni-Stuttgart.DE> > Subject: Test So far so good. I get the expected confirmation email with subject confirm 3093b4 etc etc etc But I also get a second rather confusing email: > The results of your email command are provided below. > > - Original message details: > From: Claus-Justus Heine <Claus-Justus.Heine(a)IANS.Uni-Stuttgart.DE> > Subject: Test > Date: Sat, 2 Sep 2017 22:24:08 +0200 > Message-ID: <44151460-05a8-4c35-e0d4-646efe3cf234(a)IANS.Uni-Stuttgart.DE> > > - Results: > Confirmation email sent to Claus-Justus Heine <Claus-Justus.Heine(a)IANS.Uni-Stuttgart.DE> > No such command: Test > No such command: --=20 > No such command: Claus-Justus > No such command: f=C3=BCr > No such command: Numerische > No such command: Stuttgart > No such command: +49 > No such command: +49 > > - Done. BTW, I also got the same confusing email when subscribing to mailman-users(a)mailman3.org (is attached). Can this be switched off? I don't care for myself, but if you think that this software is ready for production, then end-users should not receive such kind of """"things"""" Regards Claus -- Claus-Justus Heine himself(a)claus-justus-heine.de http://www.claus-justus-heine.de/ Schatzmeister der Camerata Academica Freiburg e.V. --- www.cafev.de

2 1

Mailman3 Docker question and importing lists from MM2
by Andrew Hodgson Sept. 2, 2017

Sept. 2, 2017

Hi, Started experimenting with the Docker images at https://github.com/maxking/docker-mailman/. I had a question regarding the parameter: SERVE_FROM_DOMAIN. I want to use multiple domains, what is the best way to specify multiple domains in this environment variable? I tried it without the environment set, and also with some variables like: SERVE_FROM_DOMAIN=['lists.domain.com', 'lists.domain2.com'] and SERVE_FROM_DOMAIN="lists.domain1.com", "lists.domain2.com" However I still only get the example.com site. Furthermore, is there a recommended way to get data from MM2 (list configs and archives) into MM3? Thanks. Andrew.

4 11

Help request, almost got it going, but ....
by Claus-Justus Heine Sept. 2, 2017

Sept. 2, 2017

First: thanks for all those development work, I am aware of the fact that this is free software and most of the development probably happened in someones spare-time. I have some problems: - I tried to install mailman v3. "Read the (non) docs" was of little help, but I got to some partly success following the commands in the scripts in the docker image at https://github.com/maxking/docker-mailman Things seemed to work out, I generated a test-list "Playground" and now I am just in the progress to click through all the configuration options in the the postorius Web-GUI. So far so good Now I read the "Message Acceptance" tab AND here is the problem: Seemingly, at some point in the deep dungeons of the source code the "Acceptable aliases" Text-Box is not interpreted correctly. Specifically, at the start it contains the string [] When then changing something int the "Message Acceptance" tab, an error shows up in the web-page (but no-where in the logs) "An error occured: []" and the bogus [] is restored. I tried to dig into the source code, and well, the data source of the text-field is an array or list of acceptable email-adresses. But seemingly finally at some point in the source code an empty list is not converted to the empty string, but to the string []. I can get rid of the error message "An error occured: []" by inserting an email-at '@' at just some place in the input box, this yields (clicking "Save changes" again and againg ...): [u"[u'@']"] [u'[u\'[u"[u\\\'@\\\']"]\']'] [u'[u\'[u\\\'[u\\\\\\\'[u"[u\\\\\\\\\\\\\\\'@\\\\\\\\\\\\\\\']"]\\\\\\\']\\\']\']'] and so on. Unfortunately, I did not find the location of this bug, although I was finally able to add some "foobar" string to the already bogus web-output. Any help would be appreciated. BTW: * where is the bug-tracker for mailman3? * The documentation is really, well, close to non existent. Personally, I think the name of the URL "read-the-docs" is almost cynical. Guess I give up on it, it just does not seem to be ready for production. This was (following the docker stuff at githb) with Pythong3: mailman==3.1.0 mailman-hyperkitty==1.1.0 Python2: mailmanclient==3.1.0 postorius==1.1.0 hyperkitty==1.1.1 django-mailman3==1.1.0 Here I realize a slight version difference between the hyperkitty stuff. But this is a bug in postorius. So what. Thanks for any help, cheers Claus -- Claus-Justus Heine himself(a)claus-justus-heine.de http://www.claus-justus-heine.de/ Schatzmeister der Camerata Academica Freiburg e.V. --- www.cafev.de

3 7