- Mailman-users - lists.mailman3.org

New MM3 plugin: mailman_sieve
by Дилян Палаузов 10 Mar '22

10 Mar '22

Hello, I have published a new Mailman 3 plugin at https://mail.aegee.org/cgit/mailman_sieve/tree/ . It generates for each mailing list a Sieve script. When the Sieve script is evaluated during the SMTP dialog, it would reject some emails, which otherwise would be bounced by Mailman. Less bounces means less backscatters and better IP reputation. For the record, I do the evaluation of the Sieve scripts during the SMTP dialog with https://mail.aegee.org/cgit/aegee-milter . Since the latter is not documented yet, you cannot use it. The mailman_sieve plugin is not useful, unless you have software to evaluate the Sieve Scripts during the SMTP dialog. This is a very first version, which does what it is supposed to do. Some optimizations are possible, like not including the subscriber addresses in the Sieve scripts for announce-only mailing lists. I am not good at writing setuptools configuration. Neither do I understand the mailman system very good right now, creating possibly shorter scripts. But the plugin is there to keep by IP reputation good! See https://mail.aegee.org/cgit/mailman_sieve/tree/README.md . My reading of the mm3 source code is that there is no event triggered, when the mailing list configuration changes, like adding a new moderator, or switching the announce-only status. In the lack of such event triggers, the Sieve scripts are not updated. When the code improves, the plugin could be published in PyPi or in mailman/contrib . Greetings Дилян

1 0

GNU Mailman in Google Summer of Code 2022!
by Stephen J. Turnbull 10 Mar '22

10 Mar '22

Hi all, We are participating in Google Summer of Code 2022 (GSoC) under the Python Software Foundation (PSF). We did apply as a separate organization, but didn't get in. Many thanks to the PSF's GSoC organization for picking us up at the last minute! You can find our ideas page at https://wiki.list.org/DEV/Google%20Summer%20of%20Code%202022, and item on the PSF ideas page under https://python-gsoc.org/ideas.html (which isn't so interesting about Mailman, but you can check out who else is under the PSF banner there). Discussion and development of project ideas will take place on mailman-developers(a)python.org. If you have a developed idea not already listed that you're willing to discuss and advocate, and you're willing to grab the template (last item on our ideas page on list.org) and fill it out, please post it to mailman-developers(a)python.org. (This a deliberate hoop-jumping exercise to filter in "serious" ideas.) You can put more weight on it by expressing interest in mentoring the project, and even more by actually volunteering! ;-) If you have a half-baked idea, and/or you want to get input from other Mailman users, of course you should feel free to discuss it on mailman-users(a)mailman3.org. We *might* pick it up from there, even if it's just a drive-by post with little support from the list members. But no promises about that, most of our attention will go to mailman-developers. If you feel some idea should get more love, polish it a little and post that to mailman-developers (don't cross-post, please). Again, we'd love to have more mentors, including backup mentors. We currently only have two mentors. Although we're both core developers, and I'm on an academic schedule and can devote plenty of time to the student during the summer, not so for Abhilash. Volunteering at this stage is not a promise to do more than look at student proposals. You would only be asked to look at the proposals, and volunteer as mentor for that project if you have interest and some level of knowledge to contribute to it. Even if you're a site admin with little Python programming experience, vetting interns' brainstorms about list admin-visible features and holding their hands until the "pros from Dover" arrive is quite helpful in making the student feel at home in our community. Many students are shy about blogging and communicating about their projects to the community -- just talking to them about their project and suggesting that they blog what they told you is helpful. Coding skills and knowledge of some part of the Mailman 3 code base are most welcome, of course, but you can make your mentor role what you want it to be. Regards, Steve

1 0

address for email for owner
by bob B 09 Mar '22

09 Mar '22

I just migrated my lists to mailman3 in docker today... YEAHHH!!!!!!!! but now my admins have to setup accounts and I noticed when they get the email to confirm it comes from admnin(a)[XYZ.COM]. Where is this email set? how can I change it? it is set to an internal domain (not public) of ours, so it is getting flagged as spam in external email accounts I looked in my docker. yaml and the MAILMAN_ADMIN_EMAIL=mailman3(a)[123.com}. which is where I would expect the request/confirmation email to come from.

1 1

Problem with debian uipgrade
by Lars Schimmer 08 Mar '22

08 Mar '22

Hi! Today I tried a mailman3 upgrade of the debian packages and I got this error: django.db.migrations.exceptions.NodeNotFoundError: Migration hyperkitty.0007_allauth_20160808_1604 dependencies reference nonexistent parent node ('socialaccount', '0003_extra_data_default_dict') Anyone has a idea howto fix those? thank you. MfG, Lars Schimmer -- ------------------------------------------------------------- TU Graz, Institut für ComputerGraphik & WissensVisualisierung Tel: +43 316 873-5405 E-Mail: l.schimmer(a)cgv.tugraz.at Fax: +43 316 873-5402 PGP-Key-ID: 0x4A9B1723

2 4

User suspended after too much spam
by Eggert Ehmke 06 Mar '22

06 Mar '22

I have set up spamassassin as spamfilter, and it works reasonable so far. Some spam passes the filter and I try to use it for training. However, one of my users has a very restrictive spam filter and rejects all spam. This causes mailman to suspend that user. I have to enable the user each time. How can I change that behaviour? I do not want my users to be suspended. Cheers

2 1

Mailman3 not working following distribution upgrade from Debian 10 to 11.
by gordon＠dickens.com 06 Mar '22

06 Mar '22

I performed a distribution upgrade from Debian 10 Buster (which runs mailman 3.2.1) to Debian 11 Bullseye (which runs mailman 3.3.1) with the command "apt-get full-upgrade -y" and everything apparently worked properly except at the end of the upgrade when the following error dialog was generated by the mailman3-web and mailman3-full post-installation scripts: Setting up mailman3-web (0+20200530-2) ... Determining localhost credentials from /etc/mysql/debian.cnf: succeeded. dbconfig-common: writing config to /etc/dbconfig-common/mailman3-web.conf dbconfig-common: flushing administrative password sed: -e expression #2, char 77: unterminated `s' command dpkg: error processing package mailman3-web (--configure): installed mailman3-web package post-installation script subprocess returned error exit status 1 dpkg: dependency problems prevent configuration of mailman3-full: mailman3-full depends on mailman3-web; however: Package mailman3-web is not configured yet. dpkg: error processing package mailman3-full (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: mailman3-web mailman3-full E: Sub-process /usr/bin/dpkg returned an error code (1) Now, every time that I execute "apt-get upgrade" then I continue to get the above error dialog. Also, the command "dpkg-reconfigure mailman3-web" generates this output: /usr/sbin/dpkg-reconfigure: mailman3-web is broken or not fully installed So, I am now stuck since apt-get is saying that mailman3-web is not configured yet, however, neither apt-get nor dpkg-reconfigure will successfully configure mailman3-web. Does anybody have any idea how to fix this? I would very much appreciate some suggestions. Thanks, Gordon

6 29

Remove login from list subscription page
by bob B 01 Mar '22

01 Mar '22

Is there any way to easily remove the login button for the List subscription page? 99% of our list do not use archiving, and log-in just confuses users so We would like for them just to be able to sign up to be on the list.

2 1

Mass un/subscribe optimization?
by Bryan Loniewski 28 Feb '22

28 Feb '22

Hi -- We've noticed slowness in mass un/subscribing users; looking through the issue(s) log we see both #419 [1] and #627 [2] open and related. From the cmd line we get better performance, but with the subscriber size on many of our Faculty/Staff/Students ad-hoc lists (think 1k-15K subscribed addresses) and with our number of lists (2600) and unique owners utilizing these actions it would be helpful to optimize the mass actions. We wanted to get some thoughts and guidance on what needs to be optimized/redesigned/fixed? Or is there already something in the works, but needs more time? We may be able to provide resources to encourage and/or assist with any development and/or testing... We run a split core/web setup with Apache,mod_wsgi and MySQL backend (AWS hosted). [1] - https://gitlab.com/mailman/mailman/-/issues/419 [2] - https://gitlab.com/mailman/mailman/-/issues/627

2 1

Migration of archives from Sympa to MM3
by Tom Fillmore 28 Feb '22

28 Feb '22

Hi, all - At the moment I have a site that uses Sympa. It has more than 150 lists. Moving existing lists to MM3 looks doable the archives are a different story. Has anyone ever migrated archives from Sympa to MM3? Sorry if this is answered somewhere else... Thanks T Fillmore southern California The earth is but one country and mankind its citizens... - Baha'u'llah

2 2

Migrating archives from mailman2 to mailman3 with attachments
by bob B 28 Feb '22

28 Feb '22

So I see the process for migrating an archive from mailman2 to mailman3 https://docs.mailman3.org/en/latest/migration.html.................. i.e python manage.py hyperkitty_import -l foo-list(a)example.com $var_prefix/archives/private/foo-list.mbox/foo-list.mbox but does the migration handle attachments?? attachments are in ..../archives/private/foo-list/attachments. I assume this is if you are upgrading in place? I am migrating to a new server and my plan is to follow these steps but copy the config.pck. and .mbox files to the new server and import them, but then it looks like I need to copy the attachment directory? if so how do I import the attachments to mailman3?

2 1