- Mailman-users - lists.mailman3.org

"The content of this message was lost."
by skenny＠scss.tcd.ie 12 Sep '22

12 Sep '22

I see that this issue has been discussed in a few other postings - it seems to be affecting us here at the moment. We're running Mailman 3.3.5 inside maxking's mailman-core/mailman-web Docker containers (version 0.4.3). This morning I composed a mail message and included two of our mailing lists in the To: field. On the first list I'm a member with address of the form my_addr_1(a)this.com. On the second I'm on it with a different address, my_addr_2(a)that.com. In the case of each list, Mailman held the message for moderation. As administrator, I accepted both. I then got the full message in my inbox at my_addr_1(a)this.com, but in my other inbox at my_addr_2(a)that.com, the body of the message was not present. Instead it read The content of this message was lost. It was probably cross-posted to multiple lists and previously handled on another list. I'm wondering what's the best thing to do here. Should I maybe downgrade to an earlier version of Mailman (i.e. an earlier version of maxking's Docker containers), pending resolution of this issue ...? Thanks for any advice. Stephen PS: The Mailman web interface "System Information" link reports: Mailman Core Version GNU Mailman 3.3.5 (Tom Sawyer) Mailman Core API Version 3.1 Mailman Core Python Version 3.8.10 (default, May 6 2021, 06:30:44) [GCC 9.3.0]

2 2

How to set uWSGI buffer size in mailman3 with Dcoker
by bob B 08 Sep '22

08 Sep '22

Running into an issue where users are getting a 502 bade gateway and we traced it down to the headers that are getting sent when they request web pages. This looks like our issue ********************* By default, uWSGI allocates a very small buffer (4096 bytes) for the headers of each request. If you start receiving “invalid request block size” in your logs, it could mean you need a bigger buffer. Increase it (up to 65535) with the buffer-size option. ********* So any idea on how to set this in mailman3 running in the maxking docker environment?

2 2

mailman3 not working for mailman21 lists
by blup＠fortytwo.ch 06 Sep '22

06 Sep '22

I installed mailman3 on a server where mailman21 was installed before. Newly created mailinglists work fine. But if I create mailinglists with a name that was previously used on mailman21 nothing works (same behaviour with and without import of old configs and archives; no logs). I purged all old mailman21 config and data and also old postfix aliases (or at least I do think so). If I send a mail to old list list1(a)a.b and new list list2(a)a.b I get the following logs /var/log/mail.log Aug 21 22:17:40 basilisgg postfix/lmtp[1728]: ED2171120BF: to=<list2(a)c.a.b>, orig_to=<list2(a)a.b>, relay=127.0.0.1[127.0.0.1]:8024, delay=0.31, delays=0.17/0.01/0/0.13, dsn=2.0.0, status=sent (250 Ok) Aug 21 22:17:40 basilisgg postfix/lmtp[1728]: ED2171120BF: to=<list1(a)c.a.b>, orig_to=<list1(a)a.b>, relay=127.0.0.1[127.0.0.1]:8024, delay=0.31, delays=0.17/0.01/0/0.13, dsn=2.0.0, status=sent (250 Ok) /var/log/mailman3/smtp.log ug 21 22:17:40 2022 (934) Available AUTH mechanisms: LOGIN(builtin) PLAIN(builtin) Aug 21 22:17:40 2022 (934) Peer: ('127.0.0.1', 44746) Aug 21 22:17:40 2022 (934) ('127.0.0.1', 44746) handling connection Aug 21 22:17:40 2022 (934) ('127.0.0.1', 44746) Data: b'LHLO c.a.b' Aug 21 22:17:40 2022 (934) ('127.0.0.1', 44746) Data: b'MAIL FROM:<....>' Aug 21 22:17:40 2022 (934) ('127.0.0.1', 44746) sender: .... Aug 21 22:17:40 2022 (934) ('127.0.0.1', 44746) Data: b'RCPT TO:<list2(a)c.a.b>' Aug 21 22:17:40 2022 (934) ('127.0.0.1', 44746) recip: list2(a)c.a.b Aug 21 22:17:40 2022 (934) ('127.0.0.1', 44746) Data: b'RCPT TO:<list1(a)c.a.b>' Aug 21 22:17:40 2022 (934) ('127.0.0.1', 44746) recip: list1(a)c.a.b Aug 21 22:17:40 2022 (934) ('127.0.0.1', 44746) Data: b'DATA' Aug 21 22:17:40 2022 (934) ('127.0.0.1', 44746) Data: b'QUIT' Aug 21 22:17:40 2022 (934) ('127.0.0.1', 44746) connection lost Aug 21 22:17:40 2022 (934) Connection lost during _handle_client() Aug 21 22:17:46 2022 (936) <166111306097.933.1775779871266718007@...> smtp to list2(a)a.b for 1 recips, completed in 3.1437485218048096 seconds How can I get more info on why the mail for list1 isn't processed? Where could old mailman21 or postfix info on list1 be stored that causes mailman3 to not handle the list properly? How can I diff the config between list1 and list2 from the command line? Regards Diana

5 12

FYI: Django security releases issued: 4.0.6 and 3.2.14
by Guillermo Hernandez (Oldno7) 29 Aug '22

29 Aug '22

https://www.djangoproject.com/weblog/2022/jul/04/security-releases/ Django security releases issued: 4.0.6 and 3.2.14 Posted by *Mariusz Felisiak* on Julio 4, 2022 In accordance with our security release policy <https://docs.djangoproject.com/en/dev/internals/security/>, the Django team is issuing Django 4.0.6 <https://docs.djangoproject.com/en/dev/releases/4.0.6/> and Django 3.2.14 <https://docs.djangoproject.com/en/dev/releases/3.2.14/>. These release addresses the security issue detailed below. We encourage all users of Django to upgrade as soon as possible. CVE-2022-34265: Potential SQL injection via Trunc(kind) and Extract(lookup_name) arguments Trunc() and Extract() database functions were subject to SQL injection if untrusted data was used as a kind/lookup_name value. Applications that constrain the lookup name and kind choice to a known safe list are unaffected. This security release mitigates the issue, but we have identified improvements to the Database API methods related to date extract and truncate that would be beneficial to add to Django 4.1 before it's final release. This will impact 3rd party database backends using Django 4.1 release candidate 1 or newer, until they are able to update to the API changes. We apologize for the inconvenience. Thanks Takuto Yoshikai (Aeye Security Lab) for the report. This issue has severity "high" according to the Django security policy. -- ___________________________________________ Mailman's content filtering has removed the following MIME parts from this message. Content-Type: image/png Name: firma-GHP-emails.png Replaced multipart/alternative part with first alternative.

5 18

Migrated from MM2 to MM3, all is well except *one* list
by Scott Courtney 28 Aug '22

28 Aug '22

Hello, all I have migrated a multi-list server from MM2 to MM3, on Debian 11, and migrated about half a dozen lists with fairly large archives. Absolutely everything has been working for a couple of months, but I am still unable to get one specific list to send mail to its subscribers. Of course, the first place I started was the logs, but that's the problem -- even with logging turned up, it appears to be failing silently as it connects to the MTA. Here's a summary of the environment: OS: Debian Linux 11, 64-bit, on a virtual machine MTA: Exim 4.94.2 List server: Mailman 3.3.3 (installed from Debian repo) Database: MariaDB 10.5.15 All daemons are running on the same host, and communication is either UNIX socket or loopback network interface, for security. Web server: Apache 2.4.53, with proxy to WSGI per the MM3 setup guide Symptom: There are six lists on the server. All six can accept inbound traffic and will post the messages to the (always private, in this environment) archives. The web interface is working perfectly. Five of the lists also can send out messages to subscribers, but the sixth list cannot send traffic to the MTA, or is not attempting to do so. Tests run so far (all resulting in successful posting to archives, but no outbound mail): * Originate mail from inbound SMTP to the list address. * Originate mail from the web UI as a member/moderator. * Originate mail from the web UI as the site admin (also the list owner). * Originate mail from both inbound SMTP and web UI by multiple users. Log data for the inbound traffic (typical test message, some data redacted): 2022-08-27 15:11:57 1oS1Dn-003AWH-Hz <= REDACTED H=REDACTED:25 P=esmtps X=TLS1.3:ECDHE_X25519__RSA_PSS_RSAE_SHA256__AES_128_GCM:128 CV=no K S=2552 DKIM=REDACTED id=REDACTED T="TEST 8.27.001" 2022-08-27 15:11:57 1oS1Dn-003AWH-Hz => MY_LIST(a)lists.MY_DOMAIN R=mailman_main_director T=mailman3_transport H=127.0.0.1 [127.0.0.1] I=[127.0.0.1] C="250 Ok" 2022-08-27 15:11:57 1oS1Dn-003AWH-Hz Completed Log data for MM3 smtp.log (again, partially redacted): Aug 27 15:11:57 2022 (690182) Available AUTH mechanisms: LOGIN(builtin) PLAIN(builtin) Aug 27 15:11:57 2022 (690182) Peer: ('127.0.0.1', 48170) Aug 27 15:11:57 2022 (690182) ('127.0.0.1', 48170) handling connection Aug 27 15:11:57 2022 (690182) ('127.0.0.1', 48170) Data: b'LHLO REDACTED' Aug 27 15:11:57 2022 (690182) ('127.0.0.1', 48170) Data: b'MAIL FROM:<REDACTED>' Aug 27 15:11:57 2022 (690182) ('127.0.0.1', 48170) sender: REDACTED Aug 27 15:11:57 2022 (690182) ('127.0.0.1', 48170) Data: b'RCPT TO:<erevnite(a)lists.4th.com>' Aug 27 15:11:57 2022 (690182) ('127.0.0.1', 48170) recip: MY_LIST(a)lists.MY_DOMAIN Aug 27 15:11:57 2022 (690182) ('127.0.0.1', 48170) Data: b'DATA' Aug 27 15:11:57 2022 (690182) ('127.0.0.1', 48170) Data: b'QUIT' Aug 27 15:11:57 2022 (690182) ('127.0.0.1', 48170) connection lost Aug 27 15:11:57 2022 (690182) Connection lost during _handle_client() Originally I thought the "connection lost" indicated a failure, but that is happening for all the lists, and also on successful traffic. Since it occurs after the QUIT command in the SMTP session, and based on some online searching, my current understanding is that this is harmless and simply indicates the MTA closed the socket after the QUIT. (Please correct me if that is wrong.) Log data for mailman.log, with partial redaction: Aug 27 15:11:57 2022 (690181) ACCEPT: <REDACTED> Aug 27 15:11:59 2022 (690178) HyperKitty archived message <REDACTED> to https://lists.MY_DOMAIN/hyperkitty/list/MY_LIST@lists.MY_DOMAIN/message/G3D… 19:11:59 [Q] INFO Enqueued 518 19:11:59 [Q] INFO Enqueued 519 19:11:59 [Q] INFO Enqueued 520 19:11:59 [Q] INFO Enqueued 521 19:11:59 [Q] INFO Enqueued 522 19:11:59 [Q] INFO Enqueued 523 19:11:59 [Q] INFO Enqueued 524 INFO 2022-08-27 19:11:59,648 690164 hyperkitty.views.mailman Archived message <REDACTED> to https://lists.MY_DOMAIN/hyperkitty/list/MY_LIST@lists.MY_DOMAIN/message/G3D… [pid: 690164|app: 0|req: 4688541/4688541] 2600:3c04::f03c:91ff:fe02:9cc1 () {64 vars in 1255 bytes} [Sat Aug 27 19:11:59 2022] POST /hyperkitty/api/mailman/archive?key=xombsjgLDqe6d1oxvBaQWH4ZT81uCEjH => generated 113 bytes in 110 msecs (HTTP/1.1 200) 5 headers in 160 bytes (1 switches on core 0) 19:12:00 [Q] INFO Process-1:4 processing [update_from_mailman] 19:12:00 [Q] INFO Process-1:3 processing [sender_mailman_id] 19:12:00 [Q] INFO Process-1:2 processing [rebuild_thread_cache_new_email] 19:12:00 [Q] INFO Process-1:1 processing [compute_thread_positions] 19:12:00 [Q] INFO Processed [rebuild_thread_cache_new_email] 19:12:00 [Q] INFO Process-1:2 processing [rebuild_mailinglist_cache_recent] 19:12:00 [Q] INFO Processed [sender_mailman_id] 19:12:00 [Q] INFO Process-1:3 processing [rebuild_mailinglist_cache_for_month] 19:12:00 [Q] INFO Process-1:1 processing [check_orphans] 19:12:00 [Q] INFO Processed [compute_thread_positions] 19:12:00 [Q] INFO Processed [rebuild_mailinglist_cache_for_month] 19:12:00 [Q] INFO Processed [check_orphans] 19:12:00 [Q] INFO Processed [rebuild_mailinglist_cache_recent] 19:12:00 [Q] INFO Processed [update_from_mailman] [pid: 690164|app: 0|req: 4693691/4693691] 184.94.240.88 () {60 vars in 929 bytes} [Sat Aug 27 19:21:50 2022] HEAD / => generated 0 bytes in 2 msecs (HTTP/1.1 301) 6 headers in 204 bytes (1 switches on core 0) [pid: 690164|app: 0|req: 4693694/4693694] 184.94.240.88 () {60 vars in 1009 bytes} [Sat Aug 27 19:21:50 2022] HEAD /postorius/lists/ => generated 7136 bytes in 142 msecs (HTTP/1.1 200) 5 headers in 163 bytes (1 switches on core 1) There is nothing at all in the Exim log indicating an outbound transaction was attempted by Mailman. I know Exim and Mailman are communicating because all the lists use the same SMTP configuration for Exim and Mailman (i.e., the non-working list is not in any way exceptional). I've done a lot of searching online to find a solution, and I did see that a couple of others had asked about this type of problem, but the only one I found that got a response had an issue that didn't apply in my small environment. Absent any other ideas, I'm going to try inserting some trace logging into the Python code, but I can't figure out what's wrong here. I've even gone to the point of looking at the SQL rows to verify this list is exactly parallel to another working list, except its name and integer ID numbers for various unique auto-increment keys. Any suggestions are appreciated. Thanks!

2 2

Using REST with CLI using curl .... help needed
by Krešimir Mihalj 27 Aug '22

27 Aug '22

Hi ! I need simple add/delete member to list using rest ..... but all documentation is for python and not helpfull for me, .... and I need these in CLI using curl command .... To add member using CLI i tried this command: curl -d "{'list_id' : 'list.domain.com', 'subscriber' : 'user(a)email.com'}" -H 'Content-Type: application/json' --user restadmin:restpass http://localhost:8001/3.0/members and I got this response: Missing parameters: list_id, subscriber What is wrong in above command here ? ..... I need to add user: user(a)email.com to list: list(a)domain.com Also, if someone is willing to give example: delete user: user(a)email.com from list: list(a)domain.com I actually create PHP application .... but CLI example is easy to reproduce in PHP function AddUserToList($user,$lista) { $url = 'http://llocalhost:8001/3.0'; $request_url = $url . '/members'; $data = array("list_id" => $lista,"subscriber" => $user ); $postdata = json_encode($data); $ch = curl_init($request_url); curl_setopt($ch, CURLOPT_RETURNTRANSFER, true); curl_setopt($ch, CURLOPT_USERPWD, "restadmin:restpass"); curl_setopt($ch, CURLOPT_POST, 1); curl_setopt($ch, CURLOPT_POSTFIELDS, $postdata); curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1); curl_setopt($ch, CURLOPT_FOLLOWLOCATION, 1); curl_setopt($ch, CURLOPT_HTTPHEADER, array('Content-Type: application/json')); $result = curl_exec($ch); curl_close($ch); print_r ($result); } AddUserToList('user(a)email.com','list.domain.com');

6 8

DKIM header not added to subscribe/unsubscribe notification email
by Philip Colmer 24 Aug '22

24 Aug '22

I have a Mailman 3 server set up with OpenDKIM and Postfix. Each of the lists has been configured so that the DMARC mitigation is "Replace From: with list address" and DMARC Mitigate unconditionally is selected. Everything seems to be working fine *except* when the system sends a notification email to the list owners of someone subscribing or unsubscribing. *Those* emails do not have the DKIM header added and are getting trapped by anti-spam systems as a result. Any suggestions as to why this might be, please? I cannot see anything in the configuration for OpenDKIM or Postfix that might allow just those messages to go out unsigned. In case it is relevant/important, this system is running: mailman 3.3.5 mailman-hyperkitty 1.2.0 mailman-web 0.0.5 mailmanclient 3.3.3 Thank you. Regards Philip

2 2

MM3 not starting
by max.diener＠hpi.de 22 Aug '22

22 Aug '22

Hi, i am trying to install MM3 and had a few issues with it. First i was trying the Mailman3-full package for Debian which didnt work good for me. There was missing paths and files, after some research i found out it may not be well maintained right now. I was working to fix the issue i come up with but had no luck with it. After that i was trying this Howto: https://wiki.list.org/DOC/Howto_Install_Mailman3_On_Debian10 the Installation worked in some aspect. i had a running mailman3 service but the webinterfaces was not working. After some searching i found a issue that was stating that the current release had a bug in it wich made it not working. For instance was the config file different for "systemctl start mailman3" then when i was checking it "mailman info" and some paths was not like in the instructions again, this time i added the folders and put the files needed for it in to it but could not make it work. i kept digging and find out for prod it is best practice to install in a virtual environment so i waited for the bug to fix and took this Installation Instructions: https://docs.list.org/en/latest/install/virtualenv.html#virtualenv-install i was a little bit confused that there seems to be two spots from the official site where you can find Installation Instructions: https://wiki.list.org/DOC/ and https://docs.list.org/ since the last one made it seem like it was newer i choose the venv installation instructions. From the install instructions at https://docs.list.org/en/latest/install/virtualenv.html#virtualenv-install i was seeing that there is also some folders not showing up like mentioned in the howto: /op/mailman/mm was not there. In the part where you configure mailman core it says you need to add the /etc/mailman/mailman.cfg file it shows that the path is used for the hyperkitty config as well as it is the path vor the "var_dir: /opt/mailman/mm/var". i added the paths and at the point in the install instructions here https://docs.list.org/en/latest/install/virtualenv.html#starting-mailman-au… i checked if i can start mailman3 now but still fail to do so. when i check "journalctl -xe" i find the following information but cant get more information on how to fix it in the net with it: Aug 22 09:54:05 mailman3test mailman[55134]: Starting Mailman's master runner Aug 22 09:54:05 mailman3test mailman[55134]: Generating MTA alias maps Aug 22 09:54:05 mailman3test systemd[1]: mailman3.service: Can't open PID file /opt/mailman/mm/var/master.pid (yet?) after start: Operation not permitted Aug 22 09:54:12 mailman3test mailman[55146]: Traceback (most recent call last): Aug 22 09:54:12 mailman3test mailman[55146]: File "/opt/mailman/venv/bin/runner", line 8, in <module> Aug 22 09:54:12 mailman3test mailman[55146]: sys.exit(main()) Aug 22 09:54:12 mailman3test mailman[55146]: File "/opt/mailman/venv/lib/python3.9/site-packages/click/core.py", line 1130, in __call__ Aug 22 09:54:12 mailman3test mailman[55146]: return self.main(*args, **kwargs) Aug 22 09:54:12 mailman3test mailman[55146]: File "/opt/mailman/venv/lib/python3.9/site-packages/click/core.py", line 1055, in main Aug 22 09:54:12 mailman3test mailman[55146]: rv = self.invoke(ctx) Aug 22 09:54:12 mailman3test mailman[55146]: File "/opt/mailman/venv/lib/python3.9/site-packages/click/core.py", line 1404, in invoke Aug 22 09:54:12 mailman3test mailman[55146]: return ctx.invoke(self.callback, **ctx.params) Aug 22 09:54:12 mailman3test mailman[55146]: File "/opt/mailman/venv/lib/python3.9/site-packages/click/core.py", line 760, in invoke Aug 22 09:54:12 mailman3test mailman[55146]: return __callback(*args, **kwargs) Aug 22 09:54:12 mailman3test mailman[55146]: File "/opt/mailman/venv/lib/python3.9/site-packages/click/decorators.py", line 26, in new_func Aug 22 09:54:12 mailman3test mailman[55146]: return f(get_current_context(), *args, **kwargs) Aug 22 09:54:12 mailman3test mailman[55146]: File "/opt/mailman/venv/lib/python3.9/site-packages/mailman/bin/runner.py", line 188, in main Aug 22 09:54:12 mailman3test mailman[55146]: runner.run() Aug 22 09:54:12 mailman3test mailman[55146]: File "/opt/mailman/venv/lib/python3.9/site-packages/mailman/runners/lmtp.py", line 255, in run Aug 22 09:54:12 mailman3test mailman[55146]: self.lmtp.start() Aug 22 09:54:12 mailman3test mailman[55146]: File "/opt/mailman/venv/lib/python3.9/site-packages/aiosmtpd/controller.py", line 210, in start Aug 22 09:54:12 mailman3test mailman[55146]: raise self._thread_exception Aug 22 09:54:12 mailman3test mailman[55146]: File "/opt/mailman/venv/lib/python3.9/site-packages/aiosmtpd/controller.py", line 176, in _run Aug 22 09:54:12 mailman3test mailman[55146]: srv: AsyncServer = self.loop.run_until_complete(self.server_coro) Aug 22 09:54:12 mailman3test mailman[55146]: File "/usr/lib/python3.9/asyncio/base_events.py", line 642, in run_until_complete Aug 22 09:54:12 mailman3test mailman[55146]: return future.result() Aug 22 09:54:12 mailman3test mailman[55146]: File "/usr/lib/python3.9/asyncio/base_events.py", line 1460, in create_server Aug 22 09:54:12 mailman3test mailman[55146]: infos = await tasks.gather(*fs, loop=self) Aug 22 09:54:12 mailman3test mailman[55146]: File "/usr/lib/python3.9/asyncio/base_events.py", line 1400, in _create_server_getaddrinfo Aug 22 09:54:12 mailman3test mailman[55146]: infos = await self._ensure_resolved((host, port), family=family, Aug 22 09:54:12 mailman3test mailman[55146]: File "/usr/lib/python3.9/asyncio/base_events.py", line 1396, in _ensure_resolved Aug 22 09:54:12 mailman3test mailman[55146]: return await loop.getaddrinfo(host, port, family=family, type=type, Aug 22 09:54:12 mailman3test mailman[55146]: File "/usr/lib/python3.9/asyncio/base_events.py", line 856, in getaddrinfo Aug 22 09:54:12 mailman3test mailman[55146]: return await self.run_in_executor( Aug 22 09:54:12 mailman3test mailman[55146]: File "/usr/lib/python3.9/concurrent/futures/thread.py", line 52, in run Aug 22 09:54:12 mailman3test mailman[55146]: result = self.fn(*self.args, **self.kwargs) Aug 22 09:54:12 mailman3test mailman[55146]: File "/usr/lib/python3.9/socket.py", line 953, in getaddrinfo Aug 22 09:54:12 mailman3test mailman[55146]: for res in _socket.getaddrinfo(host, port, family, type, proto, flags): Aug 22 09:54:12 mailman3test mailman[55146]: socket.gaierror: [Errno -2] Name or service not known Aug 22 09:55:01 mailman3test CRON[55176]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0) Aug 22 09:55:01 mailman3test CRON[55177]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1) Aug 22 09:55:01 mailman3test CRON[55176]: pam_unix(cron:session): session closed for user root Aug 22 09:55:34 mailman3test systemd[1]: mailman3.service: start operation timed out. Terminating. Aug 22 09:55:35 mailman3test systemd[1]: mailman3.service: Failed with result 'timeout'. Anybody knows whats going on and what i am doing wrong?

2 1

MM21 -> MM3 Migration: Importing archives hitting a snag
by Odhiambo Washington 17 Aug '22

17 Aug '22

With mailman installed using virtualenv /opt/mailman/mm/venv: I am trying to import list archives after importing the configs. python manage.py hyperkitty_import -l listname(a)site.name /var/list/archives/private/listname.mbox/listname.mbox python: can't open file '/opt/mailman/manage.py': [Errno 2] No such file or directory Where is manage.py PATH? -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254 7 3200 0004/+254 7 2274 3223 "Oh, the cruft.", egrep -v '^$|^.*#' ¯\_(ツ)_/¯ :-)

1 1

List Migration from MM2.1 -> MM3
by Odhiambo Washington 15 Aug '22

15 Aug '22

So I thought I have everything running. Fresh install of MM3 on Ubuntu-22.04. I have created a list in postorius - it has the same name as my old list in MM2. [image: MM3.png] Now, following - https://docs.mailman3.org/en/latest/migration.html - I change user to mailman so as to run the migration. mailman@lists:~$ pwd /opt/mailman mailman@lists:~$ id uid=1003(mailman) gid=1002(mailman) groups=1002(mailman),4(adm),38(list) mailman@lists:~$ */opt/mailman/mm/venv/bin/mailman import21 skunkworks(a)lists.my.co.ke <skunkworks(a)lists.my.co.ke> /var/list/lists/skunkworks/config.pck *# running without specifying the absolute path is not working! Usage: mailman import21 [OPTIONS] LISTSPEC PICKLE_FILE Try 'mailman import21 -h' for help. Error: No such list: skunkworks(a)lists.my.co.ke mailman@lists:~$ ls -al /var/list/lists/skunkworks/config.pck -rw-rw---- 1 root list 63765 Aug 14 11:10 /var/list/lists/skunkworks/config.pck mailman@lists:~$ exim -bt skunkworks(a)lists.my.co.ke skunkworks(a)lists.my.co.ke router = mailman3_router, transport = mailman3_transport mailman@lists:~$ What am I missing? -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254 7 3200 0004/+254 7 2274 3223 "Oh, the cruft.", egrep -v '^$|^.*#' ¯\_(ツ)_/¯ :-) ___________________________________________ Mailman's content filtering has removed the following MIME parts from this message. Content-Type: image/png Name: MM3.png Replaced multipart/alternative part with first alternative.

2 8