Search results for "sapiro" - lists.mailman3.org

[MM3-users] Re: Social signup?

by Duane Raymond

HI Mark, On Sun, 12 Mar 2023 at 22:06, Mark Sapiro <mark(a)msapiro.net> wrote: > On 3/12/23 13:56, Duane Raymond wrote: > > Is there a way to enable social signup (vs just login for existing > users)? > > It isn't at all clear or documented, but a user without an account can > go to the login page and login via a social account button and this will > create an account connected to that social account and log the user in. > Thanks for clarifying. Once I implemented social login, the buttons for social login did appear fine on the login page, but not on the signup page. I noticed for this list as well, there are no social signup buttons. So if it works, how does this happen? 1. Is there something I am missing adding to my settings.py and settings_local.py files to make it appear on the Posterius/Hyperkitty signup (vs login) page? (I searched but couldn't find anything) 2. Do I manually add this code to the Posterius/Hyperkitty signup template? 3. If a user tries to login via the login page and isn't registered will it be counted as a signup? 4. something else :-) I'm trying to get my head around where this is working from / what I need to do to get social signup obvious on the signup page (or other route) Cheers, Duane

2 years, 3 months

[MM3-users] Re: Auth question

by David Krantz

On Fri, Mar 31, 2017 at 3:13 AM, Mark Sapiro <mark(a)msapiro.net> wrote: > We're really working on getting a consistent, workable installation > story and even getting some packaged solutions. I know we're not yet > there, but we're here to help when people run into problems. The site now works, but not the / url for the site. I get this error in the mailman-web.log (with a very long stacktrace before it) NoReverseMatch: Reverse for 'hyperkitty.views.index.index' not found. 'hyperkitty.views.index.index' is not a valid view function or pattern name. I think that would correspond to this line in urls.py url(r'^$', RedirectView.as_view(url=reverse_lazy('hyperkitty.views.index.index'))), but this corresponds exactly to what the example config says and I know of no other name for hyperkitty. Probably it is dependent upon understanding the url dispatching in Django but that takes some time to read up on. The interesting thing is that /archives works so it is just this redirect that has problems. I can probably get apache to do the redirect instead but that is not the most elegant solution. Then I of course have things to do on getting social logins to work. I currently get "DoesNotExist: SocialApp matching query does not exist." if trying to connect an account to google (which I started with). Not a showstopper as passwords do work. cheers // David

8 years, 3 months

[MM3-users] Re: Where is postorius.wsgi?

by Peter Münster

On Thu, Jan 25 2018, Mark Sapiro wrote: > It's got a different name. It's in the above directory, at > example_project/wsgi.py Thank you. Unfortunately, it does not work... First I tried with python-3 (installed package was "apache2-mod_wsgi-python3"), but I got this error: Invalid command 'WSGIScriptAlias', perhaps misspelled or defined by a module n...ration Then, I tried with python-2 (installed package is now "apache2-mod_wsgi"), and this is the error message of apache: mod_wsgi (pid=18880): Target WSGI script '/srv/www/htdocs/ckc3r/postorius/example_project/wsgi.py' cannot be loaded as Python module. mod_wsgi (pid=18880): Exception occurred processing WSGI script '/srv/www/htdocs/ckc3r/postorius/example_project/wsgi.py'. Traceback (most recent call last): File "/srv/www/htdocs/ckc3r/postorius/example_project/wsgi.py", line 16, in <module> application = get_wsgi_application() File "/usr/lib/python2.7/site-packages/django/core/wsgi.py", line 14, in get_wsgi_application django.setup() File "/usr/lib/python2.7/site-packages/django/__init__.py", line 17, in setup configure_logging(settings.LOGGING_CONFIG, settings.LOGGING) File "/usr/lib/python2.7/site-packages/django/conf/__init__.py", line 48, in __getattr__ self._setup(name) File "/usr/lib/python2.7/site-packages/django/conf/__init__.py", line 44, in _setup self._wrapped = Settings(settings_module) File "/usr/lib/python2.7/site-packages/django/conf/__init__.py", line 92, in __init__ mod = importlib.import_module(self.SETTINGS_MODULE) File "/usr/lib64/python2.7/importlib/__init__.py", line 37, in import_module __import__(name) ImportError: No module named settings Could you help me please, to get Postorius working (and later also HyperKitty...)? TIA for your efforts, -- Peter

7 years, 5 months

[MM3-users] Re: Apache+mod_wsgi issue

by Odhiambo Washington

On Sun, Dec 25, 2022 at 9:05 PM Mark Sapiro <mark(a)msapiro.net> wrote: > On 12/25/22 01:14, Odhiambo Washington wrote: > > On Sat, Dec 24, 2022 at 9:40 PM Mark Sapiro <mark(a)msapiro.net> wrote: > >> > >> How about https://mm3-lists.kictanet.or.ke/user_profile/ ? > >> > > > > I have uncommented the line "WSGIScriptAlias /user-profile > > /opt/mailman/mm/wsgi.py", > > I don't see any definition for it in urls.py as well. Perhaps that's the > > issue? > > > It is defined in django_mailman3/urls.py which is referenced by > > re_path(r'', include('django_mailman3.urls')), > I have seen that now. > > When I uncomment /user-profile, I end up with an ugly URL: > > https://mm3-lists.kictanet.or.ke/user-profile/user-profile/ > > > > So instead of aliasing the /user-profile, I have decided to add another > > definition to urls.py: > > re_path(r'^user-profile/', include('allauth.urls')), > > Which I think gives me a cleaner URL: > > https://mm3-lists.kictanet.or.ke/user-profile/login/?next=/user-profile/ > > It shouldn't include `allauth.urls`. That URL is appropriate if you > aren't logged in, but what do you get when you are? > > Go to https://lists.mailman3.org/user-profile/ and log in if necessary > and you'll see what it should look like. > Here when I log in. I land on the /archives ( https://lists.mailman3.org/archives/?sort=popular) I then head to the dropdown and click "Account " and I am taken to https://lists.mailman3.org/user-profile/ (very clean URL!) and that's the same thing I am seeing on my server at the moment.. When I comment out the edit I had on /etc/mailman3/urls.py and uncomment to /user-profile alias in the VHOST, I end up with 1. https://mm3-lists.kictanet.or.ke/user-profile/mailman3/lists/ - once I am logged in 2. https://mm3-lists.kictanet.or.ke/user-profile/user-profile/ - when I click on "Account " # I hope you can see the duplication of /user-profile, which is ugly. However, your server isn't using mod_wsgi, I believe, so I shouldn't be comparing it to mine. I just don't like the extra URLs being added. > I also had to alias /accounts, which then brings me to: > > https://mm3-lists.kictanet.or.ke/accounts/mailman3/lists/ - which I > believe > > is fine because one gets the > > option to either login or signup. > > > > And I think that "/account" and "/user-profile" are synonymous. > > They are in your instance because of > > re_path(r'^user-profile/', include('allauth.urls')), > > but they should not be. > I have changed that, as already pointed out, but with consequences :) There must be a way to not have "/user-profile/user-profile" > >> It's a mod_wsgi thing. I haven't used mod_wsgi for Mailman for some time > >> (I now use gunicorn on all the sites I manage), but when I did I think I > >> had > > > > > >> WSGIScriptAlias /mm3 /opt/mailman/mm/wsgi.py > >> > >> and all the URLs were like https://example.com/mm3/mailman3/..., > >> https://example.com/mm3/archives/..., etc. > >> > > > > I already had gunicorn working too, but I just need to also figure out > this > > mod_wsgi. > > > Why? Intellectual curiosity or do you have an actual need. > It's out of intellectual curiosity actually. The bottom line is with mod_wsgi, whatever you have in your > WSGIScriptAlias is going to be prepended to the URL path. If you don't > want anything prepended, you need > ``` > WSGIScriptAlias / /opt/mailman/mm/wsgi.py > ``` > but then in order for user-profile to work, you need to replace > ``` > re_path(r'', include('django_mailman3.urls')), > ``` > in urls.py with the urlpatterns from django_mailman3/urls.py > ``` > re_path(r'^user-profile/delete$', delete_account, > name='mm_user_account_delete'), > re_path(r'^user-profile/$', user_profile, name='mm_user_profile'), > ``` > and also add > ``` > from django_mailman3.views.profile import delete_account, user_profile > ``` > to the imports in urls.py > And with that, I am now happy with what I am seeing. Again, thank you very much. -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254 7 3200 0004/+254 7 2274 3223 "Oh, the cruft.", egrep -v '^$|^.*#' ¯\_(ツ)_/¯ :-)

2 years, 6 months

[MM3-users] Re: MM3+Python3.11

by Odhiambo Washington

On Mon, Mar 6, 2023 at 7:52 PM Odhiambo Washington <odhiambo(a)gmail.com> wrote: > > > On Mon, Mar 6, 2023 at 7:32 PM Mark Sapiro <mark(a)msapiro.net> wrote: > >> On 3/6/23 08:23, Odhiambo Washington wrote: >> > >> > I install Python3.11 manually on Debian12 (maybe this is the issue!) VM >> > using the script below: >> > #!/bin/bash >> > cd Python-3.11.2 >> > ./configure --enable-optimizations >> >> You also want --enable-shared >> > > I had done that, but somehow the build had failed with it. I will try it > again. > I managed to reinstall Python3.11 the correct way: <CUT> #!/bin/bash cd Python-3.11.2 ./configure --enable-optimizations --enable-shared make altinstall # Set Python 3.11 as the Default update-alternatives --install /usr/bin/python3 python3 /usr/local/bin/python3.11 1 # Install PIP using the following command if you do not have it. curl -sS https://bootstrap.pypa.io/get-pip.py | python3.11 </CUT> After this, I installed a fresh venv, activated and installed everything according to ``` https://docs.mailman3.org/en/latest/install/virtualenv.html#virtualenv-inst… ``` MM3 is running fine with uwsgi as documented. I have not deviated even a single step from the documentation above. Now I will test with mod_wsgi and gunicorn and report back. -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254 7 3200 0004/+254 7 2274 3223 "Oh, the cruft.", egrep -v '^$|^.*#' ¯\_(ツ)_/¯ :-)

2 years, 4 months

[MM3-users]Re: Installation issues

by Andrew Hodgson

Mark Sapiro wrote: >On 04/19/2016 11:40 AM, Andrew Hodgson wrote: > >> I have often wondered if there was a howto on how this specific mailman3.org server was built, so it gives us a production-like template to follow? >Sort of, but it's not (yet) public. The process I followed is very >convoluted and not what I would recommend anyone follow. Part of the >issue is I started with mailman-bundler not using a venv, but bundler >still installs a lot of stuff in Python 2 and Python 3 venvs. I then >proceeded to install the git master branches of mailman, >mailmanclient, mailman-hyperkitty, hyperkitty and postorius and their >dependencies system wide and ripped out most of the venv stuff. I started off without using venvs and ran into several issues, though one of them I think was due to the bundler pulling down an outdated dependency. My next stab at this was going to be using venvs, but creating the venv as the directory /opt/mailman which gives cleaner paths (to my mind anyway), but haven't got round to doing it yet. My main thing when looking at this is how package managers are likely to package Mailman3, especially from a Debian point of view. I know I can't second guess what is going to be done, but would like to try to build using similar goals if possible. Thanks. Andrew.

9 years, 2 months

[MM3-users] Re: Announce Only List

by hansen＠rc.org

Stephen J. Turnbull wrote: > Mark Sapiro writes: > > On 8/13/20 9:49 AM, joseverde(a)gmail.com wrote: > > So if we want to make a list announce only (e.g. > > only specific > > folks) can post, I've found I can set the list settings to > > automatically discard messages from members and non-members. Then > > I go into the individual permissions on each user to be allowed > > to post without moderation. This works fine, however it seems > > cumbersome. > > Don't we have a list style for announce lists? If we don't, we > should.... > I don't see what's "cumbersome" about the individual permissions. You > need to do something per allowed user, if only sending email to > their individual addresses to tell them the password in the anternate > method: > > There is an alternative. Set a moderator_password for > > the list. Then > > anyone can successfully post with an Approved: <password> header or > > pseudo header if they know the password. > > Steve I have a few lists that I set up as announce-only lists by simply dumping all email but that from a couple of authorized members. It's a one-off deal and was trivial to set up. There are more urgent things to spend time on, IMHO. :-)

4 years, 10 months

[MM3-users] Re: mailman-web compress - Invalid template socialaccount/login_cancelled.html

by Odhiambo Washington

On Sat, Oct 28, 2023 at 7:19 PM Mark Sapiro <mark(a)msapiro.net> wrote: > On 10/28/23 01:59, Odhiambo Washington wrote: > > Running an install on Debian12 VM. Getting a new error message that I > > haven't seen previously: > > > > (venv) mailman@debian12:~$ mailman-web compress > > Compressing... Invalid template socialaccount/login_cancelled.html: > Invalid > > block tag on line 7: 'element', expected 'endblock'. Did you forget to > > register or load this tag? > > Invalid template account/verified_email_required.html: Invalid block tag > on > > line 7: 'element', expected 'endblock'. Did you forget to register or > load > > this tag? > > > These templates are part of django_allauth. What is your version of > that? There are backwards incompatible changes in version 0.58. See > > https://github.com/pennersr/django-allauth/blob/main/ChangeLog.rst#backward… (venv) mailman@debian12:~$ pip freeze | grep django-all django-allauth==0.58.0 If you have 0.58 try > ``` > pip install django_allauth\<0.58 ``` > After that, I end up with: (venv) mailman@debian12:~$ pip freeze | grep django-all django-allauth==0.57.0 And then `mailman-web compress` is happy. -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254 7 3200 0004/+254 7 2274 3223 "Oh, the cruft.", egrep -v '^$|^.*#' ¯\_(ツ)_/¯ :-) [How to ask smart questions: http://www.catb.org/~esr/faqs/smart-questions.html]

1 year, 8 months

[MM3-users] Re: Uncaught runner exception

by Wolfgang Bock

Thanks Mark! I changed the outgoing.py per cut&paste because I didnt know, whow th patch a python file ... But succeeded: /var/log/mailman3/mailman.log Apr 08 19:08:10 2020 (9234) Master started Apr 08 19:08:12 2020 (9241) bounces runner started. Apr 08 19:08:12 2020 (9263) virgin runner started. Apr 08 19:08:12 2020 (9259) out runner started. Apr 08 19:08:12 2020 (9255) lmtp runner started. Apr 08 19:08:12 2020 (9259) Cannot connect to SMTP server localhost on port 25 [Errno 13] Permission denied: '/var/lib/mailman3/cache/7d/c6/7dc6d1a99a5ecf2b2241d6d0958a2bc704e32238150e5cc273f6779b124bd04f' Apr 08 19:08:12 2020 (9237) archive runner started. .... Checked the ownership .... ls -la: /var/lib/mailman3/cache drwxrwx--- 3 root root 4096 Nov 9 22:27 61 drwxrwx--- 3 root root 4096 Feb 3 17:37 6c drwxrwx--- 3 root root 4096 Nov 12 11:59 71 drwxrwx--- 3 root root 4096 Nov 6 12:01 72 drwxrwx--- 3 root root 4096 Feb 5 21:52 7d drwxrwx--- 3 root root 4096 Feb 5 23:05 8b drwxrwx--- 3 root root 4096 Nov 12 23:41 94 drwxrwx--- 3 root root 4096 Nov 7 08:31 ae drwxrwx--- 3 root root 4096 Nov 12 23:40 fa /var/log/mailman3/mailman.log .... Apr 08 19:08:19 2020 (9259) Traceback (most recent call last): File "/usr/lib/python3/dist-packages/mailman/core/runner.py", line 173, in _one_iteration self._process_one_file(msg, msgdata) File "/usr/lib/python3/dist-packages/mailman/core/runner.py", line 266, in _process_one_file keepqueued = self._dispose(mlist, msg, msgdata) File "/usr/lib/python3/dist-packages/mailman/runners/outgoing.py", line 93, in _dispose self._func(mlist, msg, msgdata) File "/usr/lib/python3/dist-packages/mailman/mta/deliver.py", line 86, in deliver refused = agent.deliver(mlist, msg, msgdata) File "/usr/lib/python3/dist-packages/mailman/mta/bulk.py", line 100, in deliver self.decorate(mlist, msg, msgdata) File "/usr/lib/python3/dist-packages/mailman/mta/decorating.py", line 32, in decorate decorator.process(mlist, msg, msgdata) File "/usr/lib/python3/dist-packages/mailman/handlers/decorate.py", line 264, in process process(mlist, msg, msgdata) File "/usr/lib/python3/dist-packages/mailman/handlers/decorate.py", line 73, in process for archiver in IListArchiverSet(mlist).archivers: File "/usr/lib/python3/dist-packages/zope/interface/interface.py", line 135, in __call__ adapter = self.__adapt__(obj) File "/usr/lib/python3/dist-packages/zope/interface/interface.py", line 151, in __adapt__ adapter = hook(self, obj) File "/usr/lib/python3/dist-packages/zope/component/_api.py", line 156, in adapter_hook return sitemanager.queryAdapter(object, interface, name, default) File "/usr/lib/python3/dist-packages/zope/interface/registry.py", line 348, in queryAdapter return self.adapters.queryAdapter(object, interface, name, default) File "/usr/lib/python3/dist-packages/zope/interface/adapter.py", line 353, in queryAdapter return self.adapter_hook(provided, object, name, default) File "/usr/lib/python3/dist-packages/zope/interface/adapter.py", line 363, in adapter_hook result = factory(object) File "/usr/lib/python3/dist-packages/mailman/database/transaction.py", line 85, in wrapper return function(args[0], config.db.store, *args[1:], **kws) File "/usr/lib/python3/dist-packages/mailman/model/mailinglist.py", line 600, in __init__ for archiver in config.archivers: File "/usr/lib/python3/dist-packages/mailman/config/config.py", line 260, in archivers archiver = call_name(class_path) File "/usr/lib/python3/dist-packages/mailman/utilities/modules.py", line 70, in call_name return named_callable(*args, **kws) File "/usr/lib/python3/dist-packages/mailman/archiving/mhonarc.py", line 46, in __init__ config.archiver.mhonarc.configuration) File "/usr/lib/python3/dist-packages/mailman/config/config.py", line 335, in external_configuration cfg_path = str(expand_path(resources, path)) File "/usr/lib/python3/dist-packages/mailman/utilities/modules.py", line 80, in expand_path cfg_path = resources.enter_context(path(package, resource + '.cfg')) File "/usr/lib/python3.7/contextlib.py", line 426, in enter_context result = _cm_type.__enter__(cm) File "/usr/lib/python3.7/contextlib.py", line 112, in __enter__ return next(self.gen) File "/usr/lib/python3.7/importlib/resources.py", line 188, in path yield Path(reader.resource_path(resource)) File "<frozen importlib._bootstrap_external>", line 932, in resource_path File "<frozen importlib._bootstrap_external>", line 941, in is_resource File "<frozen importlib._bootstrap_external>", line 95, in _path_isfile File "<frozen importlib._bootstrap_external>", line 87, in _path_is_mode_type File "<frozen importlib._bootstrap_external>", line 81, in _path_stat File "/usr/lib/python3/dist-packages/mailman/core/runner.py", line 114, in signal_handler raise RunnerInterrupt mailman.interfaces.runner.RunnerInterrupt Apr 08 19:08:19 2020 (9259) SHUNTING: 1586365699.6492867+798bd45a31fb2b8d5fd24a481a3cf95710994bf7 Apr 08 19:08:19 2020 (9259) out runner exiting. Apr 08 19:08:19 2020 (9234) Master watcher caught SIGTERM. Exiting. Apr 08 19:08:19 2020 (9234) Master stopped Changed the ownership for /var/lib/mailman3/cache to list:list and from that point my lists are responding. Same problem occurs before fort he list-directory, which I corrected some days ago. Is the ownship misconfiguration a coincidence or did I made a mistake somewhere?? Thanks for your assistance! Regards Wolfgang -----Ursprüngliche Nachricht----- Von: Mark Sapiro <mark(a)msapiro.net> Gesendet: Mittwoch, 8. April 2020 00:23 An: MM3 Users <mailman-users(a)mailman3.org> Betreff: [MM3-users] Re: Uncaught runner exception On 4/7/20 2:40 PM, Wolfgang Bock via Mailman-users wrote: > Yes, I assume that means telnet localhost 25 succeeds. Try the attached patch to mailman/runners/outgoing.py. It should log more about the actual exception. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

5 years, 2 months

[MM3-users] Re: Upgrading packages

by Eggert Ehmke

Am Donnerstag, 13. Oktober 2022, 20:25:44 CEST schrieb Mark Sapiro: > On 10/13/22 10:55, Eggert Ehmke wrote: > >> It shouldn't have been necessary to apply any patch. The head of the > >> GitLab hyperkitty master branch is already compatible with mistune 2.0.4 > > > > strange, I still had the line with the (not working) > > from mistune.scanner import escape_html, escape_url > > > > maybe because the migration step was not working at that time? > > It should have nothing to do with migrations. The command > ``` > pip install --upgrade git+https://gitlab.com/mailman/hyperkitty@master > ``` > run as the mailman user with your venv active should have set the > content of venv/lib/python3.9/site-packages/hyperkitty/lib/renderer.py > to be the same as > https://gitlab.com/mailman/hyperkitty/-/blob/master/hyperkitty/lib/renderer. > py, but it didn't. I wonder what else didn't get upgraded? Clearly it did do > something because mistune was upgraded. In the meantime I run pip install --upgrade --force-reinstall git+https://gitlab.com/mailman/hyperkitty@master and that installed the correct renderer.py. Should I do this with all packages? > If you run `pip freeze` in your active venv,, what versions do you see > for the things you upgraded? Do they look for example like > ``` > HyperKitty @ > git+https://gitlab.com/mailman/hyperkitty@cf585a6588a176e714ec32bbcfe52e8a28 > fd7803 ``` Yes that version is installed.

2 years, 8 months

Search results for query "sapiro"